Start: 2014-02-19 06:40:06 UTC Package: libgpiv-mpi3 Priority: optional Section: libs Installed-Size: 256 Maintainer: Gerber van der Graaf Architecture: amd64 Source: libgpiv (0.6.1-3) Version: 0.6.1-3+b1 Depends: libc6 (>= 2.7), libfftw3-3, libglib2.0-0 (>= 2.16.0), libgomp1 (>= 4.2.1), libgsl0ldbl (>= 1.9), libhdf5-serial-1.8.4 | libhdf5-1.8.4, libopenmpi1.3, libpng12-0 (>= 1.2.13-4), libgpiv3-common (= 0.6.1-3+b1) Filename: pool/main/libg/libgpiv/libgpiv-mpi3_0.6.1-3+b1_amd64.deb Size: 105926 MD5sum: 521fc33abb88f09d1e87cb9760ec9473 SHA1: 2865adad6e4dc013558c0ac032c446f23381ae30 SHA256: f1324b45cb6f0b52d8263e360a07862e283b9de4a4b292e4d157e492925a1fb2 Description: library for Particle Image Velocimetry (PIV) - MPI version This library contains functions for evaluating images from a fluid flow by means of Particle Image Velocimetry (PIV). . PIV is a way to film the wind or liquid flows. It uses a sequence of at least two images that are recorded with a well controlled separation time in-between. Tracer particles that are resident in the fluid may be illuminated by a light source, mostly a laser, that has been re-shaped into a sheet of light. In this way, the average displacement and the deformation of the image texture is obtained. Applying this analyses on small samples of the images on a (rectangular) grid results into an instantaneous velocity field of the fluid flow. PIV may also be applied for other purposes, like deformations and vibrations of solid surfaces. . This package contains the parallelized library using Message Passing Interface (MPI). Homepage: http://libgpiv.sourceforge.net/ Tag: qa::low-popcon, role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libgpiv-mpi3=0.6.1-3+b1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libgpiv-mpi3=0.6.1-3+b1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmphEibyE 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmphEibyE 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphEibyE', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m2.5s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphEibyE', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'mount', '-t', 'proc', 'proc', '/proc'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'mount', '-t', 'proc', 'proc', '/proc'] 0m2.5s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m2.5s DEBUG: Created policy-rc.d and chmodded it. 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'update'] 0m4.8s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 1s (5434 kB/s) Reading package lists... 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'update'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-yf', 'dist-upgrade'] 0m5.9s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (33.6 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Feb 19 06:40:12 UTC 2014. Universal Time is now: Wed Feb 19 06:40:12 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-yf', 'dist-upgrade'] 0m5.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmphEibyE/tmp/scripts/ 0m5.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmphEibyE/tmp/scripts/ 0m5.9s INFO: Running scripts post_setup 0m5.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_experimental'] 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_experimental'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_forbid_home'] 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_forbid_home'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.0s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m7.4s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (7224 kB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--get-selections', '*'] 0m7.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--get-selections', '*'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-divert', '--list'] 0m8.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-divert', '--list'] 0m8.0s INFO: apt-cache does not know about any of the requested packages 0m8.0s INFO: Running scripts pre_test 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_test_root_password'] 0m8.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_test_root_password'] 0m8.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m8.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m9.1s DEBUG: No broken symlinks as far as we can find. 0m9.1s INFO: Running scripts pre_install 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_database-server'] 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_database-server'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_exceptions'] 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_exceptions'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_extras'] 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_extras'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'show', 'libgpiv-mpi3=0.6.1-3+b1'] 0m9.2s DUMP: Package: libgpiv-mpi3 Priority: optional Section: libs Installed-Size: 256 Maintainer: Gerber van der Graaf Architecture: amd64 Source: libgpiv (0.6.1-3) Version: 0.6.1-3+b1 Depends: libc6 (>= 2.7), libfftw3-3, libglib2.0-0 (>= 2.16.0), libgomp1 (>= 4.2.1), libgsl0ldbl (>= 1.9), libhdf5-serial-1.8.4 | libhdf5-1.8.4, libopenmpi1.3, libpng12-0 (>= 1.2.13-4), libgpiv3-common (= 0.6.1-3+b1) Filename: pool/main/libg/libgpiv/libgpiv-mpi3_0.6.1-3+b1_amd64.deb Size: 105926 MD5sum: 521fc33abb88f09d1e87cb9760ec9473 SHA1: 2865adad6e4dc013558c0ac032c446f23381ae30 SHA256: f1324b45cb6f0b52d8263e360a07862e283b9de4a4b292e4d157e492925a1fb2 Description: library for Particle Image Velocimetry (PIV) - MPI version This library contains functions for evaluating images from a fluid flow by means of Particle Image Velocimetry (PIV). . PIV is a way to film the wind or liquid flows. It uses a sequence of at least two images that are recorded with a well controlled separation time in-between. Tracer particles that are resident in the fluid may be illuminated by a light source, mostly a laser, that has been re-shaped into a sheet of light. In this way, the average displacement and the deformation of the image texture is obtained. Applying this analyses on small samples of the images on a (rectangular) grid results into an instantaneous velocity field of the fluid flow. PIV may also be applied for other purposes, like deformations and vibrations of solid surfaces. . This package contains the parallelized library using Message Passing Interface (MPI). Homepage: http://libgpiv.sourceforge.net/ Tag: qa::low-popcon, role::shared-lib 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'show', 'libgpiv-mpi3=0.6.1-3+b1'] 0m9.2s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.7), libfftw3-3, libglib2.0-0 (>= 2.16.0), libgomp1 (>= 4.2.1), libgsl0ldbl (>= 1.9), libhdf5-serial-1.8.4 | libhdf5-1.8.4, libopenmpi1.3, libpng12-0 (>= 1.2.13-4), libgpiv3-common (= 0.6.1-3+b1) 0m9.2s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpizfmi9/piuparts-depends-dummy'] 0m9.2s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpizfmi9/piuparts-depends-dummy.deb'. 0m9.2s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpizfmi9/piuparts-depends-dummy'] 0m9.2s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpizfmi9/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmphEibyE/tmp 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m9.2s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libfftw3-3; however: Package libfftw3-3 is not installed. piuparts-depends-dummy depends on libglib2.0-0 (>= 2.16.0); however: Package libglib2.0-0 is not installed. piuparts-depends-dummy depends on libgomp1 (>= 4.2.1); however: Package libgomp1 is not installed. piuparts-depends-dummy depends on libgsl0ldbl (>= 1.9); however: Package libgsl0ldbl is not installed. piuparts-depends-dummy depends on libhdf5-serial-1.8.4 | libhdf5-1.8.4; however: Package libhdf5-serial-1.8.4 is not installed. Package libhdf5-1.8.4 is not installed. piuparts-depends-dummy depends on libopenmpi1.3; however: Package libopenmpi1.3 is not installed. piuparts-depends-dummy depends on libpng12-0 (>= 1.2.13-4); however: Package libpng12-0 is not installed. piuparts-depends-dummy depends on libgpiv3-common (= 0.6.1-3+b1); however: Package libgpiv3-common is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m9.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-yf', 'install'] 0m11.4s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libfftw3-3 libgfortran3 libglib2.0-0 libgomp1 libgpiv3-common libgsl0ldbl libhdf5-serial-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libpcre3 libpng12-0 libtorque2 Suggested packages: libfftw3-dev gsl-ref-psdoc gsl-doc-pdf gsl-doc-info gsl-ref-html Recommended packages: libglib2.0-data shared-mime-info The following NEW packages will be installed: libfftw3-3 libgfortran3 libglib2.0-0 libgomp1 libgpiv3-common libgsl0ldbl libhdf5-serial-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libpcre3 libpng12-0 libtorque2 0 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 7340 kB of archives. After this operation, 20.0 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libfftw3-3 amd64 3.2.2-1 [1399 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libpcre3 amd64 8.02-1.1 [234 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libglib2.0-0 amd64 2.24.2-1 [1122 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libgomp1 amd64 4.4.5-8 [25.3 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libgsl0ldbl amd64 1.14+dfsg-1 [1024 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libgfortran3 amd64 4.4.5-8 [291 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libhdf5-serial-1.8.4 amd64 1.8.4-patch1-2 [1479 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main libibverbs1 amd64 1.1.3-2 [33.7 kB] Get:9 http://mirror.bm.debian.org/debian/ squeeze/main libnuma1 amd64 2.0.5-1 [26.7 kB] Get:10 http://mirror.bm.debian.org/debian/ squeeze/main libtorque2 amd64 2.4.8+dfsg-9squeeze3 [115 kB] Get:11 http://mirror.bm.debian.org/debian/ squeeze/main libopenmpi1.3 amd64 1.4.2-4 [1400 kB] Get:12 http://mirror.bm.debian.org/debian/ squeeze/main libpng12-0 amd64 1.2.44-1+squeeze4 [180 kB] Get:13 http://mirror.bm.debian.org/debian/ squeeze/main libgpiv3-common amd64 0.6.1-3+b1 [8946 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 7340 kB in 0s (7410 kB/s) Selecting previously deselected package libfftw3-3. (Reading database ... 6258 files and directories currently installed.) Unpacking libfftw3-3 (from .../libfftw3-3_3.2.2-1_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Selecting previously deselected package libgomp1. Unpacking libgomp1 (from .../libgomp1_4.4.5-8_amd64.deb) ... Selecting previously deselected package libgsl0ldbl. Unpacking libgsl0ldbl (from .../libgsl0ldbl_1.14+dfsg-1_amd64.deb) ... Selecting previously deselected package libgfortran3. Unpacking libgfortran3 (from .../libgfortran3_4.4.5-8_amd64.deb) ... Selecting previously deselected package libhdf5-serial-1.8.4. Unpacking libhdf5-serial-1.8.4 (from .../libhdf5-serial-1.8.4_1.8.4-patch1-2_amd64.deb) ... Selecting previously deselected package libibverbs1. Unpacking libibverbs1 (from .../libibverbs1_1.1.3-2_amd64.deb) ... Selecting previously deselected package libnuma1. Unpacking libnuma1 (from .../libnuma1_2.0.5-1_amd64.deb) ... Selecting previously deselected package libtorque2. Unpacking libtorque2 (from .../libtorque2_2.4.8+dfsg-9squeeze3_amd64.deb) ... Selecting previously deselected package libopenmpi1.3. Unpacking libopenmpi1.3 (from .../libopenmpi1.3_1.4.2-4_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.44-1+squeeze4_amd64.deb) ... Selecting previously deselected package libgpiv3-common. Unpacking libgpiv3-common (from .../libgpiv3-common_0.6.1-3+b1_amd64.deb) ... Setting up libfftw3-3 (3.2.2-1) ... Setting up libpcre3 (8.02-1.1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libgomp1 (4.4.5-8) ... Setting up libgsl0ldbl (1.14+dfsg-1) ... Setting up libgfortran3 (4.4.5-8) ... Setting up libhdf5-serial-1.8.4 (1.8.4-patch1-2) ... Setting up libibverbs1 (1.1.3-2) ... Setting up libnuma1 (2.0.5-1) ... Setting up libtorque2 (2.4.8+dfsg-9squeeze3) ... Setting up libopenmpi1.3 (1.4.2-4) ... Setting up libpng12-0 (1.2.44-1+squeeze4) ... Setting up libgpiv3-common (0.6.1-3+b1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-yf', 'install'] 0m11.4s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m11.4s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmphEibyE/tmp/piuparts-depends-dummy.deb 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m11.4s DUMP: piuparts-depends-dummy install ok installed 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m11.5s DUMP: (Reading database ... 6499 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m12.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m12.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m13.4s DEBUG: No broken symlinks as far as we can find. 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'policy'] 0m13.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'policy'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'policy', 'libgpiv-mpi3'] 0m13.4s DUMP: libgpiv-mpi3: Installed: (none) Candidate: 0.6.1-3+b1 Version table: 0.6.1-3+b1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-cache', 'policy', 'libgpiv-mpi3'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-y', 'install', 'libgpiv-mpi3=0.6.1-3+b1'] 0m14.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libgpiv-mpi3 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 106 kB of archives. After this operation, 262 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libgpiv-mpi3 amd64 0.6.1-3+b1 [106 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 106 kB in 0s (2466 kB/s) Selecting previously deselected package libgpiv-mpi3. (Reading database ... 6499 files and directories currently installed.) Unpacking libgpiv-mpi3 (from .../libgpiv-mpi3_0.6.1-3+b1_amd64.deb) ... Setting up libgpiv-mpi3 (0.6.1-3+b1) ... 0m14.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', '-y', 'install', 'libgpiv-mpi3=0.6.1-3+b1'] 0m14.1s INFO: Running scripts post_install 0m14.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m14.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m15.2s DEBUG: No broken symlinks as far as we can find. 0m15.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--get-selections', '*'] 0m15.2s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libfftw3-3 install libgcc1 install libgfortran3 install libglib2.0-0 install libgomp1 install libgpiv-mpi3 install libgpiv3-common install libgsl0ldbl install libhdf5-serial-1.8.4 install libibverbs1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libnuma1 install libopenmpi1.3 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libpng12-0 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtorque2 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m15.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--get-selections', '*'] 0m15.7s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphEibyE', '-ac'] 0m16.4s DUMP: debsums: no md5sums for mawk 0m16.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphEibyE', '-ac'] 0m16.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m16.4s DUMP: 0.11.3~bpo70+1 0m16.4s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m16.4s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m16.4s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'libgpiv-mpi3'] 0m16.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'libgpiv-mpi3'] 0m16.5s INFO: Running scripts pre_remove 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_exceptions'] 0m16.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/pre_remove_exceptions'] 0m16.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'remove', 'libglib2.0-0', 'libgomp1', 'libpng12-0', 'libgpiv3-common', 'libopenmpi1.3', 'libhdf5-serial-1.8.4', 'libpcre3', 'libibverbs1', 'libgfortran3', 'libgsl0ldbl', 'libfftw3-3', 'libnuma1', 'libtorque2', 'libgpiv-mpi3'] 0m17.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libfftw3-3 libgfortran3 libglib2.0-0 libgomp1 libgpiv-mpi3 libgpiv3-common libgsl0ldbl libhdf5-serial-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libpcre3 libpng12-0 libtorque2 0 upgraded, 0 newly installed, 14 to remove and 0 not upgraded. After this operation, 20.3 MB disk space will be freed. (Reading database ... 6505 files and directories currently installed.) Removing libgpiv-mpi3 ... Removing libfftw3-3 ... Removing libopenmpi1.3 ... Removing libhdf5-serial-1.8.4 ... Removing libgfortran3 ... Removing libglib2.0-0 ... Removing libgomp1 ... Removing libgpiv3-common ... Removing libgsl0ldbl ... Removing libibverbs1 ... Removing libnuma1 ... Removing libpcre3 ... Removing libpng12-0 ... Removing libtorque2 ... 0m17.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'remove', 'libglib2.0-0', 'libgomp1', 'libpng12-0', 'libgpiv3-common', 'libopenmpi1.3', 'libhdf5-serial-1.8.4', 'libpcre3', 'libibverbs1', 'libgfortran3', 'libgsl0ldbl', 'libfftw3-3', 'libnuma1', 'libtorque2', 'libgpiv-mpi3'] 0m17.4s INFO: Running scripts post_remove 0m17.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_remove_exceptions_lenny'] 0m17.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_remove_exceptions_lenny'] 0m17.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_remove_extras'] 0m17.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_remove_extras'] 0m17.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'libglib2.0-0', 'libgomp1', 'libpng12-0', 'libgpiv3-common', 'libopenmpi1.3', 'libhdf5-serial-1.8.4', 'libpcre3', 'libibverbs1', 'libgfortran3', 'libgsl0ldbl', 'libfftw3-3', 'libnuma1', 'libtorque2'] 0m17.5s DUMP: (Reading database ... 6260 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libgomp1 ... Purging configuration files for libgomp1 ... Removing libpng12-0 ... Purging configuration files for libpng12-0 ... Removing libgpiv3-common ... Purging configuration files for libgpiv3-common ... Removing libopenmpi1.3 ... Purging configuration files for libopenmpi1.3 ... Removing libhdf5-serial-1.8.4 ... Purging configuration files for libhdf5-serial-1.8.4 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libibverbs1 ... Purging configuration files for libibverbs1 ... Removing libgfortran3 ... Purging configuration files for libgfortran3 ... Removing libgsl0ldbl ... Purging configuration files for libgsl0ldbl ... Removing libfftw3-3 ... Purging configuration files for libfftw3-3 ... Removing libnuma1 ... Purging configuration files for libnuma1 ... Removing libtorque2 ... Purging configuration files for libtorque2 ... 0m17.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'libglib2.0-0', 'libgomp1', 'libpng12-0', 'libgpiv3-common', 'libopenmpi1.3', 'libhdf5-serial-1.8.4', 'libpcre3', 'libibverbs1', 'libgfortran3', 'libgsl0ldbl', 'libfftw3-3', 'libnuma1', 'libtorque2'] 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'libgpiv-mpi3'] 0m17.5s DUMP: (Reading database ... 6259 files and directories currently installed.) Removing libgpiv-mpi3 ... Purging configuration files for libgpiv-mpi3 ... 0m17.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', 'libgpiv-mpi3'] 0m17.5s INFO: Running scripts post_purge 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_purge_exceptions'] 0m17.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'tmp/scripts/post_purge_exceptions'] 0m17.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', '--pending'] 0m17.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--purge', '--pending'] 0m17.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--remove', '--pending'] 0m17.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg', '--remove', '--pending'] 0m17.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m17.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m18.6s DEBUG: No broken symlinks as far as we can find. 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-divert', '--list'] 0m18.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'dpkg-divert', '--list'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'apt-get', 'clean'] 0m19.7s INFO: PASS: Installation and purging test. 0m20.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'umount', '/proc'] 0m20.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphEibyE', 'umount', '/proc'] 0m20.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m20.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphEibyE'] 0m20.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmphEibyE 0m20.1s INFO: PASS: All tests. 0m20.1s INFO: piuparts run ends. ret=0 End: 2014-02-19 06:40:27 UTC