Start: 2014-11-05 18:41:37 UTC Package: pump Priority: optional Section: admin Installed-Size: 72 Maintainer: Philippe Coval Architecture: amd64 Version: 0.8.24-7 Provides: dhcp-client Depends: libc6 (>= 2.3), libpopt0 (>= 1.15), netbase Suggests: resolvconf Conflicts: dhcpcd Filename: pool/main/p/pump/pump_0.8.24-7_amd64.deb Size: 35066 MD5sum: 6105274787b6a9433a2b0206133d5787 SHA1: 85588e9c323172fa9d952b906fc0f256536ee8b3 SHA256: d9bd3d3e1f3298adf49e55e0fb23ded0b462f93deaf7364d09dc0aaec613c3d4 Description: BOOTP and DHCP client for automatic IP configuration This is the BOOTP/DHCP client written by RedHat. . DHCP (Dynamic Host Configuration Protocol) and BOOTP (Boot Protocol) are protocols which allow individual devices on an IP network to get their own network configuration information (IP address, subnetmask, broadcast address, etc.) from network servers. The overall purpose of DHCP and BOOTP is to make it easier to administer a large network. . Pump is a combined BOOTP and DHCP client daemon, which allows your machine to retrieve configuration information from a server. You should install this package if you are on a network which uses BOOTP or DHCP. Tag: admin::boot, interface::daemon, network::client, network::configuration, protocol::dhcp, qa::orphaned, role::program Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt pump=0.8.24-7 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.61~201410311243~0.59-25-gb896a6f starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt pump=0.8.24-7 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpXRxv2l 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpXRxv2l 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'update'] 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpXRxv2l/tmp/scripts/ 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpXRxv2l/tmp/scripts/ 0m1.8s INFO: Running scripts post_chroot_unpack 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (19.5 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--get-selections', '*'] 0m3.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--get-selections', '*'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-divert', '--list'] 0m3.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-divert', '--list'] 0m3.6s INFO: apt-cache does not know about any of the requested packages 0m3.6s INFO: Running scripts pre_test 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_test_root_password'] 0m3.6s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_test_root_password'] 0m3.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m3.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m4.7s DEBUG: No broken symlinks as far as we can find. 0m4.7s INFO: Running scripts pre_install 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_extras'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_extras'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'show', 'pump=0.8.24-7'] 0m4.8s DUMP: Package: pump Priority: optional Section: admin Installed-Size: 72 Maintainer: Philippe Coval Architecture: amd64 Version: 0.8.24-7 Provides: dhcp-client Depends: libc6 (>= 2.3), libpopt0 (>= 1.15), netbase Suggests: resolvconf Conflicts: dhcpcd Filename: pool/main/p/pump/pump_0.8.24-7_amd64.deb Size: 35066 MD5sum: 6105274787b6a9433a2b0206133d5787 SHA1: 85588e9c323172fa9d952b906fc0f256536ee8b3 SHA256: d9bd3d3e1f3298adf49e55e0fb23ded0b462f93deaf7364d09dc0aaec613c3d4 Description: BOOTP and DHCP client for automatic IP configuration This is the BOOTP/DHCP client written by RedHat. . DHCP (Dynamic Host Configuration Protocol) and BOOTP (Boot Protocol) are protocols which allow individual devices on an IP network to get their own network configuration information (IP address, subnetmask, broadcast address, etc.) from network servers. The overall purpose of DHCP and BOOTP is to make it easier to administer a large network. . Pump is a combined BOOTP and DHCP client daemon, which allows your machine to retrieve configuration information from a server. You should install this package if you are on a network which uses BOOTP or DHCP. Tag: admin::boot, interface::daemon, network::client, network::configuration, protocol::dhcp, qa::orphaned, role::program 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'show', 'pump=0.8.24-7'] 0m4.8s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libpopt0 (>= 1.15), netbase Conflicts: dhcpcd 0m4.8s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpApLyYP/piuparts-depends-dummy'] 0m4.8s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpApLyYP/piuparts-depends-dummy.deb'. 0m4.8s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpApLyYP/piuparts-depends-dummy'] 0m4.8s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpApLyYP/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpXRxv2l/tmp 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.8s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libpopt0 (>= 1.15); however: Package libpopt0 is not installed. piuparts-depends-dummy depends on netbase; however: Package netbase is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-yf', 'install'] 0m5.4s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libpopt0 netbase Recommended packages: ifupdown The following NEW packages will be installed: libpopt0 netbase 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 74.8 kB of archives. After this operation, 623 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libpopt0 amd64 1.16-1 [54.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main netbase all 4.45 [20.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 74.8 kB in 0s (0 B/s) Selecting previously deselected package libpopt0. (Reading database ... 6261 files and directories currently installed.) Unpacking libpopt0 (from .../libpopt0_1.16-1_amd64.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../archives/netbase_4.45_all.deb) ... Setting up libpopt0 (1.16-1) ... Setting up netbase (4.45) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-yf', 'install'] 0m5.4s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.4s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpXRxv2l/tmp/piuparts-depends-dummy.deb 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DUMP: piuparts-depends-dummy install ok installed 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.5s DUMP: (Reading database ... 6313 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m6.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m6.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m7.0s DEBUG: No broken symlinks as far as we can find. 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'policy'] 0m7.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'policy'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'policy', 'pump'] 0m7.1s DUMP: pump: Installed: (none) Candidate: 0.8.24-7 Version table: 0.8.24-7 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-cache', 'policy', 'pump'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-y', 'install', 'pump=0.8.24-7'] 0m7.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: resolvconf The following NEW packages will be installed: pump 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 35.1 kB of archives. After this operation, 73.7 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main pump amd64 0.8.24-7 [35.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.1 kB in 0s (1644 kB/s) Selecting previously deselected package pump. (Reading database ... 6313 files and directories currently installed.) Unpacking pump (from .../pump_0.8.24-7_amd64.deb) ... Setting up pump (0.8.24-7) ... 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', '-y', 'install', 'pump=0.8.24-7'] 0m7.6s INFO: Running scripts post_install 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_install_exceptions'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_install_exceptions'] 0m7.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m7.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m8.7s DEBUG: No broken symlinks as far as we can find. 0m8.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--get-selections', '*'] 0m8.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpopt0 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install netbase install passwd install perl-base install pump install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m8.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--get-selections', '*'] 0m9.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', '-ac'] 0m9.8s DUMP: debsums: no md5sums for mawk debsums: no md5sums for netbase 0m9.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', '-ac'] 0m9.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.8s DUMP: 0.12~bpo70+1 0m9.8s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.8s INFO: Running adequate version 0.12~bpo70+1 now. 0m9.8s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'pump'] 0m9.9s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'pump'] 0m9.9s INFO: Running scripts pre_remove 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_exceptions'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/pre_remove_exceptions'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'remove', 'libpopt0', 'netbase', 'pump'] 0m10.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libpopt0 netbase pump 0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded. After this operation, 696 kB disk space will be freed. (Reading database ... 6321 files and directories currently installed.) Removing pump ... Removing libpopt0 ... Removing netbase ... 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'remove', 'libpopt0', 'netbase', 'pump'] 0m10.6s INFO: Running scripts post_remove 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_remove_extras'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_remove_extras'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'libpopt0', 'netbase'] 0m10.7s DUMP: (Reading database ... 6265 files and directories currently installed.) Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing netbase ... Purging configuration files for netbase ... 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'libpopt0', 'netbase'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'pump'] 0m10.7s DUMP: dpkg: warning: ignoring request to remove pump which isn't installed. 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', 'pump'] 0m10.7s INFO: Running scripts post_purge 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_purge_exceptions'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'tmp/scripts/post_purge_exceptions'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', '--pending'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--purge', '--pending'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--remove', '--pending'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg', '--remove', '--pending'] 0m10.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m11.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m11.8s DEBUG: No broken symlinks as far as we can find. 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-divert', '--list'] 0m11.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'dpkg-divert', '--list'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'apt-get', 'clean'] 0m12.7s DEBUG: File was renamed: /etc/rcS.d/S11mountnfs.sh => /etc/rcS.d/S12mountnfs.sh 0m12.7s DEBUG: File was renamed: /etc/rc0.d/K04umountroot => /etc/rc0.d/K05umountroot 0m12.7s DEBUG: File was renamed: /etc/rcS.d/S14stop-bootlogd-single => /etc/rcS.d/S15stop-bootlogd-single 0m12.7s DEBUG: File was renamed: /etc/rcS.d/S12mountnfs-bootclean.sh => /etc/rcS.d/S13mountnfs-bootclean.sh 0m12.7s DEBUG: File was renamed: /etc/rc0.d/K05halt => /etc/rc0.d/K06halt 0m12.7s DEBUG: File was renamed: /etc/rc0.d/K03umountfs => /etc/rc0.d/K04umountfs 0m12.7s DEBUG: File was renamed: /etc/rcS.d/S13bootmisc.sh => /etc/rcS.d/S14bootmisc.sh 0m12.7s DEBUG: File was renamed: /etc/rc6.d/K03umountfs => /etc/rc6.d/K04umountfs 0m12.7s DEBUG: File was renamed: /etc/rc6.d/K05reboot => /etc/rc6.d/K06reboot 0m12.7s DEBUG: File was renamed: /etc/rc6.d/K04umountroot => /etc/rc6.d/K05umountroot 0m12.7s INFO: PASS: Installation and purging test. 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'umount', '/proc'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpXRxv2l', 'umount', '/proc'] 0m13.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m13.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpXRxv2l'] 0m13.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpXRxv2l 0m13.1s INFO: PASS: All tests. 0m13.1s INFO: piuparts run ends. ret=0 End: 2014-11-05 18:41:50 UTC