Start: 2014-02-25 21:39:15 UTC Package: sleuthkit Priority: optional Section: admin Installed-Size: 540 Maintainer: Debian Forensics Architecture: amd64 Version: 3.1.3-1 Depends: libc6 (>= 2.2.5), libstdc++6 (>= 4.1.1), libtsk3-3 (>= 3.0.1), file, libdate-manip-perl Filename: pool/main/s/sleuthkit/sleuthkit_3.1.3-1_amd64.deb Size: 119068 MD5sum: b3923e37e842f0fb9ddc89db95235c3a SHA1: abe89c81a0153e674882cc6d05cf0c93e82184f4 SHA256: a0a457eb2691e58c194e44ad903e4b422d5250a4368b5dd75cab256543d3acb6 Description: collection of tools for forensics analysis on volume and file system data The Sleuth Kit (previously known as TASK) is a collection of UNIX-based command line file and volume system forensic analysis tools. The file system tools allow you to examine file systems of a suspect computer in a non-intrusive fashion. Because the tools do not rely on the operating system to process the file systems, deleted and hidden content is shown. . The volume system (media management) tools allow you to examine the layout of disks and other media. The Sleuth Kit supports DOS partitions, BSD partitions (disk labels), Mac partitions, Sun slices (Volume Table of Contents), and GPT disks. With these tools, you can identify where partitions are located and extract them so that they can be analyzed with file system analysis tools. . This package contains the set of command line tools in The Sleuth Kit. Homepage: http://www.sleuthkit.org/sleuthkit/ Tag: admin::forensics, admin::recovery, interface::commandline, role::program, scope::utility Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt sleuthkit=3.1.3-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt sleuthkit=3.1.3-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpmVc7Eg 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpmVc7Eg 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'update'] 0m3.6s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 0s (8815 kB/s) Reading package lists... 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'update'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-yf', 'dist-upgrade'] 0m4.8s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (49.7 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Feb 25 21:39:20 UTC 2014. Universal Time is now: Tue Feb 25 21:39:20 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-yf', 'dist-upgrade'] 0m4.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpmVc7Eg/tmp/scripts/ 0m4.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpmVc7Eg/tmp/scripts/ 0m4.8s INFO: Running scripts post_setup 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_experimental'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_experimental'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_forbid_home'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_forbid_home'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.8s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.8s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (30.8 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--get-selections', '*'] 0m6.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--get-selections', '*'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-divert', '--list'] 0m6.3s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-divert', '--list'] 0m6.3s INFO: apt-cache does not know about any of the requested packages 0m6.3s INFO: Running scripts pre_test 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_test_root_password'] 0m6.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_test_root_password'] 0m6.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m6.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m7.4s DEBUG: No broken symlinks as far as we can find. 0m7.4s INFO: Running scripts pre_install 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_database-server'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_database-server'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_exceptions'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_exceptions'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_extras'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_extras'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'show', 'sleuthkit=3.1.3-1'] 0m7.5s DUMP: Package: sleuthkit Priority: optional Section: admin Installed-Size: 540 Maintainer: Debian Forensics Architecture: amd64 Version: 3.1.3-1 Depends: libc6 (>= 2.2.5), libstdc++6 (>= 4.1.1), libtsk3-3 (>= 3.0.1), file, libdate-manip-perl Filename: pool/main/s/sleuthkit/sleuthkit_3.1.3-1_amd64.deb Size: 119068 MD5sum: b3923e37e842f0fb9ddc89db95235c3a SHA1: abe89c81a0153e674882cc6d05cf0c93e82184f4 SHA256: a0a457eb2691e58c194e44ad903e4b422d5250a4368b5dd75cab256543d3acb6 Description: collection of tools for forensics analysis on volume and file system data The Sleuth Kit (previously known as TASK) is a collection of UNIX-based command line file and volume system forensic analysis tools. The file system tools allow you to examine file systems of a suspect computer in a non-intrusive fashion. Because the tools do not rely on the operating system to process the file systems, deleted and hidden content is shown. . The volume system (media management) tools allow you to examine the layout of disks and other media. The Sleuth Kit supports DOS partitions, BSD partitions (disk labels), Mac partitions, Sun slices (Volume Table of Contents), and GPT disks. With these tools, you can identify where partitions are located and extract them so that they can be analyzed with file system analysis tools. . This package contains the set of command line tools in The Sleuth Kit. Homepage: http://www.sleuthkit.org/sleuthkit/ Tag: admin::forensics, admin::recovery, interface::commandline, role::program, scope::utility 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'show', 'sleuthkit=3.1.3-1'] 0m7.5s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.2.5), libstdc++6 (>= 4.1.1), libtsk3-3 (>= 3.0.1), file, libdate-manip-perl 0m7.5s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp3HlZOH/piuparts-depends-dummy'] 0m7.5s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp3HlZOH/piuparts-depends-dummy.deb'. 0m7.5s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp3HlZOH/piuparts-depends-dummy'] 0m7.5s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp3HlZOH/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpmVc7Eg/tmp 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.6s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libtsk3-3 (>= 3.0.1); however: Package libtsk3-3 is not installed. piuparts-depends-dummy depends on file; however: Package file is not installed. piuparts-depends-dummy depends on libdate-manip-perl; however: Package libdate-manip-perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-yf', 'install'] 0m10.7s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: file libdate-manip-perl libdb4.7 libewf1 libgdbm3 libmagic1 libtsk3-3 libyaml-syck-perl perl perl-modules Suggested packages: perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: netbase The following NEW packages will be installed: file libdate-manip-perl libdb4.7 libewf1 libgdbm3 libmagic1 libtsk3-3 libyaml-syck-perl perl perl-modules 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 11.8 MB of archives. After this operation, 54.9 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libewf1 amd64 20100226-1 [198 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libtsk3-3 amd64 3.1.3-1 [215 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libmagic1 amd64 5.04-5+squeeze2 [235 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main file amd64 5.04-5+squeeze2 [50.0 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:9 http://mirror.bm.debian.org/debian/ squeeze/main libyaml-syck-perl amd64 1.12-1 [86.8 kB] Get:10 http://mirror.bm.debian.org/debian/ squeeze/main libdate-manip-perl all 6.11-1 [2354 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 11.8 MB in 1s (8040 kB/s) Selecting previously deselected package libewf1. (Reading database ... 6258 files and directories currently installed.) Unpacking libewf1 (from .../libewf1_20100226-1_amd64.deb) ... Selecting previously deselected package libtsk3-3. Unpacking libtsk3-3 (from .../libtsk3-3_3.1.3-1_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.04-5+squeeze2_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5+squeeze2_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libyaml-syck-perl. Unpacking libyaml-syck-perl (from .../libyaml-syck-perl_1.12-1_amd64.deb) ... Selecting previously deselected package libdate-manip-perl. Unpacking libdate-manip-perl (from .../libdate-manip-perl_6.11-1_all.deb) ... Setting up libewf1 (20100226-1) ... Setting up libtsk3-3 (3.1.3-1) ... Setting up libmagic1 (5.04-5+squeeze2) ... Setting up file (5.04-5+squeeze2) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libyaml-syck-perl (1.12-1) ... Setting up libdate-manip-perl (6.11-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-yf', 'install'] 0m10.7s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m10.7s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpmVc7Eg/tmp/piuparts-depends-dummy.deb 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m10.8s DUMP: piuparts-depends-dummy install ok installed 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m10.8s DUMP: (Reading database ... 9613 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m11.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m12.9s DEBUG: No broken symlinks as far as we can find. 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'policy'] 0m12.9s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'policy'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'policy', 'sleuthkit'] 0m13.0s DUMP: sleuthkit: Installed: (none) Candidate: 3.1.3-1 Version table: 3.1.3-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-cache', 'policy', 'sleuthkit'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-y', 'install', 'sleuthkit=3.1.3-1'] 0m13.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: sleuthkit 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 119 kB of archives. After this operation, 553 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main sleuthkit amd64 3.1.3-1 [119 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 119 kB in 0s (1395 kB/s) Selecting previously deselected package sleuthkit. (Reading database ... 9613 files and directories currently installed.) Unpacking sleuthkit (from .../sleuthkit_3.1.3-1_amd64.deb) ... Setting up sleuthkit (3.1.3-1) ... 0m13.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', '-y', 'install', 'sleuthkit=3.1.3-1'] 0m13.6s INFO: Running scripts post_install 0m13.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m14.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m15.3s DEBUG: No broken symlinks as far as we can find. 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--get-selections', '*'] 0m15.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install file install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdate-manip-perl install libdb4.7 install libdb4.8 install libewf1 install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libmagic1 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtsk3-3 install libusb-0.1-4 install libuuid1 install libyaml-syck-perl install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sleuthkit install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--get-selections', '*'] 0m16.2s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', '-ac'] 0m17.1s DUMP: debsums: no md5sums for mawk 0m17.1s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', '-ac'] 0m17.1s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.1s DUMP: 0.11.3~bpo70+1 0m17.1s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.1s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m17.1s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'sleuthkit'] 0m17.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'sleuthkit'] 0m17.5s INFO: Running scripts pre_remove 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m17.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m17.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m17.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m17.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_exceptions'] 0m17.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/pre_remove_exceptions'] 0m17.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'remove', 'libewf1', 'libmagic1', 'perl-modules', 'libgdbm3', 'libtsk3-3', 'libdate-manip-perl', 'perl', 'libdb4.7', 'file', 'libyaml-syck-perl', 'sleuthkit'] 0m18.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: file libdate-manip-perl libdb4.7 libewf1 libgdbm3 libmagic1 libtsk3-3 libyaml-syck-perl perl perl-modules sleuthkit 0 upgraded, 0 newly installed, 11 to remove and 0 not upgraded. After this operation, 55.4 MB disk space will be freed. (Reading database ... 9673 files and directories currently installed.) Removing sleuthkit ... Removing file ... Removing libdate-manip-perl ... Removing libyaml-syck-perl ... Removing libtsk3-3 ... Removing libewf1 ... Removing libmagic1 ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m18.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'remove', 'libewf1', 'libmagic1', 'perl-modules', 'libgdbm3', 'libtsk3-3', 'libdate-manip-perl', 'perl', 'libdb4.7', 'file', 'libyaml-syck-perl', 'sleuthkit'] 0m18.5s INFO: Running scripts post_remove 0m18.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_remove_exceptions_lenny'] 0m18.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_remove_exceptions_lenny'] 0m18.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_remove_extras'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_remove_extras'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'libewf1', 'libmagic1', 'perl-modules', 'libgdbm3', 'libtsk3-3', 'libdate-manip-perl', 'perl', 'libdb4.7', 'file', 'libyaml-syck-perl'] 0m18.6s DUMP: (Reading database ... 6263 files and directories currently installed.) Removing libewf1 ... Purging configuration files for libewf1 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing perl-modules ... Purging configuration files for perl-modules ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... Removing libtsk3-3 ... Purging configuration files for libtsk3-3 ... dpkg: warning: ignoring request to remove libdate-manip-perl which isn't installed. dpkg: warning: ignoring request to remove perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. dpkg: warning: ignoring request to remove file which isn't installed. dpkg: warning: ignoring request to remove libyaml-syck-perl which isn't installed. 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'libewf1', 'libmagic1', 'perl-modules', 'libgdbm3', 'libtsk3-3', 'libdate-manip-perl', 'perl', 'libdb4.7', 'file', 'libyaml-syck-perl'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'sleuthkit'] 0m18.6s DUMP: dpkg: warning: ignoring request to remove sleuthkit which isn't installed. 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', 'sleuthkit'] 0m18.6s INFO: Running scripts post_purge 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_purge_exceptions'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'tmp/scripts/post_purge_exceptions'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', '--pending'] 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--purge', '--pending'] 0m18.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--remove', '--pending'] 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg', '--remove', '--pending'] 0m18.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m19.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m19.7s DEBUG: No broken symlinks as far as we can find. 0m19.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-divert', '--list'] 0m19.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m19.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'dpkg-divert', '--list'] 0m19.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m19.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'apt-get', 'clean'] 0m20.9s INFO: PASS: Installation and purging test. 0m21.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'umount', '/proc'] 0m21.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg', 'umount', '/proc'] 0m21.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m21.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmVc7Eg'] 0m21.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpmVc7Eg 0m21.4s INFO: PASS: All tests. 0m21.4s INFO: piuparts run ends. ret=0 End: 2014-02-25 21:39:37 UTC