|
debian-science-maintainers@lists.alioth.debian.org in squeeze2wheezy
|
| other distributions: | experimental sid2experimental sid testing2sid jessie wheezy2jessie wheezy2bpo2jessie wheezy squeeze2bpo2wheezy squeeze lenny2squeeze |
| fail: | 0 | |
| unknown: | 0 | |
| pass: | 105 | armadillo artha atlas bibus bibutils blas blitz++ cb2bib cba cfortran cimg code-saturne cqrlib critterding cvector deal.ii debian-science dolfin ecs etsf-io ffc fiat findimagedupes freecad freemat geomview gerris getfem++ gmsh gtkmathview hkl hpcc hypre illuminator imview imview-doc itsol jeuclid jhdf kseg kwwidgets lapack libalberta2 libbft libcgns libfvm libgtkdatabox libmatio libmei libqsearch libstxxl life med-fichier mpi-defaults mpich2 muparser neartree netgen opencascade openigtlink openturns opticalraytracer orsa paraview petsc plotdrop polylib polyml qtiplot qwtplot3d r-cran-amore r-cran-colorspace r-cran-msm r-cran-plotrix r-cran-sp r-cran-spc r-cran-teachingdemos r-cran-vcd r-cran-xtable rasmol scilab scilab-ann scilab-celestlab scilab-overload scilab-plotlib scilab-scimax scilab-scimysql scotch simage sketch slepc slicer sparskit spooles suitesparse syrthes teem texmaker ufc ufl v-sim viewmol viper wordnet wxmaxima |
| armadillo in squeeze2wheezy |
| Source: | armadillo | piuparts summary: |  | Version: | 0.9.52-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Kumar Appaiah <akumar@debian.org> |
| Binary: | libarmadillo-dev | piuparts-result: | successfully-tested 1:3.2.3+dfsg-1 | Version: | 1:3.2.3+dfsg-1 |
| Binary: | libarmadillo-doc | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libarmadillo0 | piuparts-result: | successfully-tested None | Version: | None |
| artha in squeeze2wheezy |
| Source: | artha | piuparts summary: | | Version: | 0.9.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sundaram Ramaswamy <legends2k@yahoo.com>, Andreas Tille <tille@debian.org> |
| Binary: | artha | piuparts-result: | successfully-tested 1.0.2-1 | Version: | 1.0.2-1 |
| atlas in squeeze2wheezy |
| Source: | atlas | piuparts summary: | | Version: | 3.8.3-27 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libatlas-base-dev | piuparts-result: | successfully-tested 3.8.4-9 | Version: | 3.8.4-9 |
| Binary: | libatlas-dev | piuparts-result: | successfully-tested 3.8.4-9 | Version: | 3.8.4-9 |
| Binary: | libatlas-doc | piuparts-result: | successfully-tested 3.8.4-9 | Version: | 3.8.4-9 |
| Binary: | libatlas-test | piuparts-result: | successfully-tested 3.8.4-9 | Version: | 3.8.4-9 |
| Binary: | libatlas3gf-base | piuparts-result: | successfully-tested 3.8.4-9 | Version: | 3.8.4-9 |
| bibus in squeeze2wheezy |
| Source: | bibus | piuparts summary: | | Version: | 1.5.1-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Jan Beyer <jan@beathovn.de>, Charles Plessy <plessy@debian.org> |
| Binary: | bibus | piuparts-result: | successfully-tested 1.5.2-1 | Version: | 1.5.2-1 |
| Binary: | bibus-doc-en | piuparts-result: | successfully-tested 1.5.2-1 | Version: | 1.5.2-1 |
| bibutils in squeeze2wheezy |
| Source: | bibutils | piuparts summary: | | Version: | 4.8-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | David Bremner <bremner@unb.ca> |
| Binary: | bibutils | piuparts-result: | successfully-tested 4.12-5 | Version: | 4.12-5 |
| Binary: | libbibutils-dev | piuparts-result: | successfully-tested 4.12-5 | Version: | 4.12-5 |
| Binary: | libbibutils1 | piuparts-result: | successfully-tested None | Version: | None |
| blas in squeeze2wheezy |
| Source: | blas | piuparts summary: | | Version: | 1.2-8 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libblas-dev | piuparts-result: | successfully-tested 1.2.20110419-5 | Version: | 1.2.20110419-5 |
| Binary: | libblas-doc | piuparts-result: | successfully-tested 1.2.20110419-5 | Version: | 1.2.20110419-5 |
| Binary: | libblas-test | piuparts-result: | successfully-tested 1.2.20110419-5 | Version: | 1.2.20110419-5 |
| Binary: | libblas3gf | piuparts-result: | successfully-tested 1.2.20110419-5 | Version: | 1.2.20110419-5 |
| blitz++ in squeeze2wheezy |
| Source: | blitz++ | piuparts summary: | | Version: | 1:0.9-10 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | libblitz-doc | piuparts-result: | successfully-tested 1:0.9-13 | Version: | 1:0.9-13 |
| Binary: | libblitz0-dev | piuparts-result: | successfully-tested 1:0.9-13 | Version: | 1:0.9-13 |
| Binary: | libblitz0ldbl | piuparts-result: | successfully-tested 1:0.9-13 | Version: | 1:0.9-13 |
| cb2bib in squeeze2wheezy |
| Source: | cb2bib | piuparts summary: | | Version: | 1.4.0-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Filippo Rusconi <rusconi-debian@laposte.net> |
| Binary: | cb2bib | piuparts-result: | successfully-tested 1.4.8-1 | Version: | 1.4.8-1 |
| cba in squeeze2wheezy |
| Source: | cba | piuparts summary: | | Version: | 0.3.6-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Ferdinand Griffon <idf.dresden@gmx.net> |
| Binary: | cba | piuparts-result: | successfully-tested 0.3.6-4 | Version: | 0.3.6-4 |
| cfortran in squeeze2wheezy |
| Source: | cfortran | piuparts summary: | | Version: | 4.4-14 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Bastien ROUCARIÈS <roucaries.bastien+debian@gmail.com> |
| Binary: | cfortran | piuparts-result: | successfully-tested 4.4-14 | Version: | 4.4-14 |
| cimg in squeeze2wheezy |
| Source: | cimg | piuparts summary: | | Version: | 1.3.9-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sam Hocevar (Debian packages) <sam+deb@zoy.org>, Christophe Prud'homme <prudhomm@debian.org>, Andreas Tille <tille@debian.org> |
| Binary: | cimg-dev | piuparts-result: | successfully-tested 1.4.9-2 | Version: | 1.4.9-2 |
| Binary: | cimg-doc | piuparts-result: | successfully-tested 1.4.9-2 | Version: | 1.4.9-2 |
| Binary: | cimg-examples | piuparts-result: | successfully-tested 1.4.9-2 | Version: | 1.4.9-2 |
| code-saturne in squeeze2wheezy |
| Source: | code-saturne | piuparts summary: | | Version: | 2.0.0.rc1-5 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | code-saturne | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
| Binary: | code-saturne-bin | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
| Binary: | code-saturne-data | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
| Binary: | code-saturne-doc | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
| Binary: | code-saturne-include | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
| cqrlib in squeeze2wheezy |
| Source: | cqrlib | piuparts summary: | | Version: | 1.0.3-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com> |
| Binary: | libcqrlib2 | piuparts-result: | successfully-tested 1.1.2-1 | Version: | 1.1.2-1 |
| Binary: | libcqrlib2-dev | piuparts-result: | successfully-tested 1.1.2-1 | Version: | 1.1.2-1 |
| critterding in squeeze2wheezy |
| Source: | critterding | piuparts summary: | | Version: | 1.0-beta12.1-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Gabriele Giacone <1o5g4r8o@gmail.com> |
| Binary: | critterding | piuparts-result: | successfully-tested 1.0-beta12.1-1.2 | Version: | 1.0-beta12.1-1.2 |
| cvector in squeeze2wheezy |
| Source: | cvector | piuparts summary: | | Version: | 1.0.3-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com> |
| Binary: | libcvector2 | piuparts-result: | successfully-tested 1.0.3-1 | Version: | 1.0.3-1 |
| Binary: | libcvector2-dev | piuparts-result: | successfully-tested 1.0.3-1 | Version: | 1.0.3-1 |
| deal.ii in squeeze2wheezy |
| Source: | deal.ii | piuparts summary: | | Version: | 6.3.1-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | deal.ii-doc | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | deal.ii-examples | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdeal.ii-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdeal.ii-dbg6.3.1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdeal.ii-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdeal.ii6.3.1 | piuparts-result: | successfully-tested None | Version: | None |
| debian-science in squeeze2wheezy |
| Source: | debian-science | piuparts summary: | | Version: | 0.12 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Frederic Daniel Luc Lehobey <Frederic@Lehobey.net>, Andreas Tille <tille@debian.org>, Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | science-astronomy | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-astronomy-dev | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-biology | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-chemistry | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-config | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-dataacquisition | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-electronics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-engineering | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-engineering-dev | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-geography | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-imageanalysis | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-linguistics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-machine-learning | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-mathematics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-mathematics-dev | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-meteorology | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-meteorology-dev | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-nanoscale-physics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-nanoscale-physics-dev | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-neuroscience-cognitive | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-numericalcomputation | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-physics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-robotics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-statistics | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-tasks | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-typesetting | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| Binary: | science-viewing | piuparts-result: | successfully-tested 1.0 | Version: | 1.0 |
| dolfin in squeeze2wheezy |
| Source: | dolfin | piuparts summary: | | Version: | 0.9.8-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | dolfin-bin | piuparts-result: | successfully-tested 1.0.0-7 | Version: | 1.0.0-7 |
| Binary: | dolfin-dev | piuparts-result: | successfully-tested 1.0.0-7 | Version: | 1.0.0-7 |
| Binary: | dolfin-doc | piuparts-result: | successfully-tested 1.0.0-7 | Version: | 1.0.0-7 |
| Binary: | libdolfin0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdolfin0-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libdolfin0-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | python-dolfin | piuparts-result: | successfully-tested 1.0.0-7 | Version: | 1.0.0-7 |
| ecs in squeeze2wheezy |
| Source: | ecs | piuparts summary: | | Version: | 2.0.0.rc1-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | ecs | piuparts-result: | successfully-tested None | Version: | None |
| etsf-io in squeeze2wheezy |
| Source: | etsf-io | piuparts summary: | | Version: | 1.0.3-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org>, Damien Caliste <damien.caliste@cea.fr> |
| Binary: | etsf-io | piuparts-result: | successfully-tested 1.0.3-4+b1 | Version: | 1.0.3-4+b1 |
| Binary: | libetsf-io-dev | piuparts-result: | successfully-tested 1.0.3-4+b1 | Version: | 1.0.3-4+b1 |
| Binary: | libetsf-io-doc | piuparts-result: | successfully-tested 1.0.3-4 | Version: | 1.0.3-4 |
| ffc in squeeze2wheezy |
| Source: | ffc | piuparts summary: | | Version: | 0.9.3-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | python-ffc | piuparts-result: | successfully-tested 1.0.0-1 | Version: | 1.0.0-1 |
| fiat in squeeze2wheezy |
| Source: | fiat | piuparts summary: | | Version: | 0.9.2-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | python-fiat | piuparts-result: | successfully-tested 1.0.0-1 | Version: | 1.0.0-1 |
| findimagedupes in squeeze2wheezy |
| Source: | findimagedupes | piuparts summary: | | Version: | 2.18-4 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org>, Manuel Prinz <manuel@debian.org> |
| Binary: | findimagedupes | piuparts-result: | successfully-tested 2.18-4+b2 | Version: | 2.18-4+b2 |
| freecad in squeeze2wheezy |
| Source: | freecad | piuparts summary: | | Version: | 0.10.3247.dfsg-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com>, "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | freecad | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | freecad-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | freecad-doc | piuparts-result: | successfully-tested None | Version: | None |
| freemat in squeeze2wheezy |
| Source: | freemat | piuparts summary: | | Version: | 4.0-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Giuseppe Iuculano <iuculano@debian.org> |
| Binary: | freemat | piuparts-result: | successfully-tested 4.0-5 | Version: | 4.0-5 |
| Binary: | freemat-data | piuparts-result: | successfully-tested 4.0-5 | Version: | 4.0-5 |
| Binary: | freemat-help | piuparts-result: | successfully-tested 4.0-5 | Version: | 4.0-5 |
| geomview in squeeze2wheezy |
| Source: | geomview | piuparts summary: | | Version: | 1.9.4-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Steve M. Robbins <smr@debian.org> |
| Binary: | geomview | piuparts-result: | successfully-tested 1.9.4-3 | Version: | 1.9.4-3 |
| Binary: | libgeomview-1.9.4 | piuparts-result: | successfully-tested 1.9.4-3 | Version: | 1.9.4-3 |
| Binary: | libgeomview-dev | piuparts-result: | successfully-tested 1.9.4-3 | Version: | 1.9.4-3 |
| gerris in squeeze2wheezy |
| Source: | gerris | piuparts summary: | | Version: | 20091109-dfsg.1-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Drew Parsons <dparsons@debian.org> |
| Binary: | gerris | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libgfs-1.3-1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libgfs-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libgfs-dev | piuparts-result: | successfully-tested None | Version: | None |
| getfem++ in squeeze2wheezy |
| Source: | getfem++ | piuparts summary: | | Version: | 4.0.0-4 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Konstantinos Poulios <poulios.konstantinos@gmail.com> |
| Binary: | libgetfem++-dbg | piuparts-result: | successfully-tested 4.1.1+dfsg1-11 | Version: | 4.1.1+dfsg1-11 |
| Binary: | libgetfem++-dev | piuparts-result: | successfully-tested 4.1.1+dfsg1-11 | Version: | 4.1.1+dfsg1-11 |
| Binary: | libgetfem4++ | piuparts-result: | successfully-tested 4.1.1+dfsg1-11 | Version: | 4.1.1+dfsg1-11 |
| Binary: | libgmm++-dev | piuparts-result: | successfully-tested 4.1.1+dfsg1-11 | Version: | 4.1.1+dfsg1-11 |
| Binary: | python-getfem++ | piuparts-result: | successfully-tested 4.1.1+dfsg1-11 | Version: | 4.1.1+dfsg1-11 |
| gmsh in squeeze2wheezy |
| Source: | gmsh | piuparts summary: | | Version: | 2.4.2.dfsg-5 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org> |
| Binary: | gmsh | piuparts-result: | successfully-tested None | Version: | None |
| gtkmathview in squeeze2wheezy |
| Source: | gtkmathview | piuparts summary: | | Version: | 0.8.0-5 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libgtkmathview-bin | piuparts-result: | successfully-tested 0.8.0-8 | Version: | 0.8.0-8 |
| Binary: | libgtkmathview-dev | piuparts-result: | successfully-tested 0.8.0-8 | Version: | 0.8.0-8 |
| Binary: | libgtkmathview0c2a | piuparts-result: | successfully-tested 0.8.0-8 | Version: | 0.8.0-8 |
| hkl in squeeze2wheezy |
| Source: | hkl | piuparts summary: | | Version: | 4.0.3-2 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Picca Frédéric-Emmanuel <picca@synchrotron-soleil.fr> |
| Binary: | ghkl | piuparts-result: | successfully-tested 4.0.3-4 | Version: | 4.0.3-4 |
| Binary: | libhkl-dbg | piuparts-result: | successfully-tested 4.0.3-4 | Version: | 4.0.3-4 |
| Binary: | libhkl-dev | piuparts-result: | successfully-tested 4.0.3-4 | Version: | 4.0.3-4 |
| Binary: | libhkl-doc | piuparts-result: | successfully-tested 4.0.3-4 | Version: | 4.0.3-4 |
| Binary: | libhkl4 | piuparts-result: | successfully-tested 4.0.3-4 | Version: | 4.0.3-4 |
| hpcc in squeeze2wheezy |
| Source: | hpcc | piuparts summary: | | Version: | 1.4.1-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Lucas Nussbaum <lucas@lucas-nussbaum.net> |
| Binary: | hpcc | piuparts-result: | successfully-tested 1.4.1-2 | Version: | 1.4.1-2 |
| hypre in squeeze2wheezy |
| Source: | hypre | piuparts summary: | | Version: | 2.4.0b-7 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libhypre-2.4.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libhypre-dev | piuparts-result: | successfully-tested 2.8.0b-1 | Version: | 2.8.0b-1 |
| illuminator in squeeze2wheezy |
| Source: | illuminator | piuparts summary: | | Version: | 0.11.0-7 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | illuminator-demo | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | illuminator-doc | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libluminate-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libluminate7 | piuparts-result: | successfully-tested None | Version: | None |
| imview in squeeze2wheezy |
| Source: | imview | piuparts summary: | | Version: | 1.1.9c-7 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com>, Andreas Tille <tille@debian.org> |
| Binary: | imview | piuparts-result: | successfully-tested None | Version: | None |
| imview-doc in squeeze2wheezy |
| Source: | imview-doc | piuparts summary: | | Version: | 1.0.1-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com> |
| Binary: | imview-doc | piuparts-result: | successfully-tested 1.0.1-3 | Version: | 1.0.1-3 |
| itsol in squeeze2wheezy |
| Source: | itsol | piuparts summary: | | Version: | 1.0.0-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@cs.tu-berlin.de> |
| Binary: | libitsol-dev | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
| Binary: | libitsol1 | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
| jeuclid in squeeze2wheezy |
| Source: | jeuclid | piuparts summary: | | Version: | 3.1.9-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org>, Torsten Werner <twerner@debian.org> |
| Binary: | jeuclid-cli | piuparts-result: | successfully-tested 3.1.9-2 | Version: | 3.1.9-2 |
| Binary: | jeuclid-mathviewer | piuparts-result: | successfully-tested 3.1.9-2 | Version: | 3.1.9-2 |
| Binary: | libjeuclid-core-java | piuparts-result: | successfully-tested 3.1.9-2 | Version: | 3.1.9-2 |
| Binary: | libjeuclid-fop-java | piuparts-result: | successfully-tested 3.1.9-2 | Version: | 3.1.9-2 |
| jhdf in squeeze2wheezy |
| Source: | jhdf | piuparts summary: | | Version: | 2.6.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | hdfview | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| Binary: | libjhdf-doc | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| Binary: | libjhdf4-java | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| Binary: | libjhdf4-jni | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| Binary: | libjhdf5-java | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| Binary: | libjhdf5-jni | piuparts-result: | successfully-tested 2.8.0-5 | Version: | 2.8.0-5 |
| kseg in squeeze2wheezy |
| Source: | kseg | piuparts summary: | | Version: | 0.4.0.3-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Steve M. Robbins <smr@debian.org> |
| Binary: | kseg | piuparts-result: | successfully-tested None | Version: | None |
| kwwidgets in squeeze2wheezy |
| Source: | kwwidgets | piuparts summary: | | Version: | 1.0.0~cvs20090825-4 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@cs.tu-berlin.de> |
| Binary: | kwwidgets-doc | piuparts-result: | successfully-tested 1.0.0~cvs20100930-8 | Version: | 1.0.0~cvs20100930-8 |
| Binary: | kwwidgets-examples | piuparts-result: | successfully-tested 1.0.0~cvs20100930-8 | Version: | 1.0.0~cvs20100930-8 |
| Binary: | libkwwidgets1-dev | piuparts-result: | successfully-tested 1.0.0~cvs20100930-8 | Version: | 1.0.0~cvs20100930-8 |
| Binary: | libkwwidgets1.0.0908 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | python-kwwidgets | piuparts-result: | successfully-tested 1.0.0~cvs20100930-8 | Version: | 1.0.0~cvs20100930-8 |
| Binary: | tcl8.5-kwwidgets | piuparts-result: | successfully-tested 1.0.0~cvs20100930-8 | Version: | 1.0.0~cvs20100930-8 |
| lapack in squeeze2wheezy |
| Source: | lapack | piuparts summary: | | Version: | 3.2.1-8 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | liblapack-dev | piuparts-result: | successfully-tested 3.4.1+dfsg-1 | Version: | 3.4.1+dfsg-1 |
| Binary: | liblapack-doc | piuparts-result: | successfully-tested 3.4.1+dfsg-1 | Version: | 3.4.1+dfsg-1 |
| Binary: | liblapack-pic | piuparts-result: | successfully-tested 3.4.1+dfsg-1 | Version: | 3.4.1+dfsg-1 |
| Binary: | liblapack-test | piuparts-result: | successfully-tested 3.4.1+dfsg-1 | Version: | 3.4.1+dfsg-1 |
| Binary: | liblapack3gf | piuparts-result: | successfully-tested 3.4.1+dfsg-1 | Version: | 3.4.1+dfsg-1 |
| libalberta2 in squeeze2wheezy |
| Source: | libalberta2 | piuparts summary: | | Version: | 2.0.1-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | André Gaul <gaul@web-yard.de>, Sylvestre Ledru <sylvestre@debian.org>, |
| Binary: | libalberta2 | piuparts-result: | successfully-tested 2.0.1-5 | Version: | 2.0.1-5 |
| Binary: | libalberta2-dbg | piuparts-result: | successfully-tested 2.0.1-5 | Version: | 2.0.1-5 |
| Binary: | libalberta2-dev | piuparts-result: | successfully-tested 2.0.1-5 | Version: | 2.0.1-5 |
| libbft in squeeze2wheezy |
| Source: | libbft | piuparts summary: | | Version: | 1.1.2-5 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libbft-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libbft1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libbft1-dbg | piuparts-result: | successfully-tested None | Version: | None |
| libcgns in squeeze2wheezy |
| Source: | libcgns | piuparts summary: | | Version: | 2.5.4-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | cgns-convert | piuparts-result: | successfully-tested 3.1.3.4-1+b1 | Version: | 3.1.3.4-1+b1 |
| Binary: | libcgns-dev | piuparts-result: | successfully-tested 3.1.3.4-1+b1 | Version: | 3.1.3.4-1+b1 |
| Binary: | libcgns2 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libcgns2-dbg | piuparts-result: | successfully-tested None | Version: | None |
| libfvm in squeeze2wheezy |
| Source: | libfvm | piuparts summary: | | Version: | 0.15.0-4 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libfvm-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libfvm0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libfvm0-dbg | piuparts-result: | successfully-tested None | Version: | None |
| libgtkdatabox in squeeze2wheezy |
| Source: | libgtkdatabox | piuparts summary: | | Version: | 1:0.9.1.1-3.1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Ramakrishnan Muthukrishnan <rkrishnan@debian.org>, Andreas Tille <tille@debian.org> |
| Binary: | libgtkdatabox-0.9.1-1 | piuparts-result: | successfully-tested 1:0.9.1.1-4 | Version: | 1:0.9.1.1-4 |
| Binary: | libgtkdatabox-0.9.1-1-dev | piuparts-result: | successfully-tested 1:0.9.1.1-4 | Version: | 1:0.9.1.1-4 |
| Binary: | libgtkdatabox-0.9.1-1-glade | piuparts-result: | successfully-tested 1:0.9.1.1-4 | Version: | 1:0.9.1.1-4 |
| Binary: | libgtkdatabox-0.9.1-1-libglade | piuparts-result: | successfully-tested 1:0.9.1.1-4 | Version: | 1:0.9.1.1-4 |
| libmatio in squeeze2wheezy |
| Source: | libmatio | piuparts summary: | | Version: | 1.3.4-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libmatio-dev | piuparts-result: | successfully-tested 1.3.4-4 | Version: | 1.3.4-4 |
| Binary: | libmatio-doc | piuparts-result: | successfully-tested 1.3.4-4 | Version: | 1.3.4-4 |
| Binary: | libmatio0 | piuparts-result: | successfully-tested 1.3.4-4 | Version: | 1.3.4-4 |
| Binary: | libmatio0-dbg | piuparts-result: | successfully-tested 1.3.4-4 | Version: | 1.3.4-4 |
| libmei in squeeze2wheezy |
| Source: | libmei | piuparts summary: | | Version: | 1.0.1-8 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libmei-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libmei0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libmei0-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | python-mei | piuparts-result: | successfully-tested None | Version: | None |
| libqsearch in squeeze2wheezy |
| Source: | libqsearch | piuparts summary: | | Version: | 1.0.8-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Rudi Cilibrasi <cilibrar@debian.org>, Andreas Tille <tille@debian.org> |
| Binary: | libqsearch-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqsearch-gomp-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqsearch-gomp1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqsearch1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqsearch1-headers | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | qsearch-tools | piuparts-result: | successfully-tested None | Version: | None |
| libstxxl in squeeze2wheezy |
| Source: | libstxxl | piuparts summary: | | Version: | 1.2.1-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | D Haley <mycae@yahoo.com>, Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | libstxxl-dev | piuparts-result: | successfully-tested 1.3.1-4 | Version: | 1.3.1-4 |
| Binary: | libstxxl-doc | piuparts-result: | successfully-tested 1.3.1-4 | Version: | 1.3.1-4 |
| Binary: | libstxxl1 | piuparts-result: | successfully-tested 1.3.1-4 | Version: | 1.3.1-4 |
| Binary: | libstxxl1-dbg | piuparts-result: | successfully-tested 1.3.1-4 | Version: | 1.3.1-4 |
| life in squeeze2wheezy |
| Source: | life | piuparts summary: | | Version: | 0.9.24-7 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org> |
| Binary: | liblife | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | liblife-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | liblife-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | life-apps | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | life-doc | piuparts-result: | successfully-tested None | Version: | None |
| med-fichier in squeeze2wheezy |
| Source: | med-fichier | piuparts summary: | | Version: | 2.3.6-5 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Aurelien Jarno <aurel32@debian.org>, "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libmed-dev | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmed-doc | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmed-tools | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmed1 | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmedc-dev | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmedc1 | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmedimport-dev | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmedimport0 | piuparts-result: | successfully-tested 3.0.3-3 | Version: | 3.0.3-3 |
| Binary: | libmedimportcxx-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libmedimportcxx0 | piuparts-result: | successfully-tested None | Version: | None |
| mpi-defaults in squeeze2wheezy |
| Source: | mpi-defaults | piuparts summary: | | Version: | 0.6 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org>, Manuel Prinz <manuel@debian.org> |
| Binary: | mpi-default-bin | piuparts-result: | successfully-tested 1.0.1 | Version: | 1.0.1 |
| Binary: | mpi-default-dev | piuparts-result: | successfully-tested 1.0.1 | Version: | 1.0.1 |
| mpich2 in squeeze2wheezy |
| Source: | mpich2 | piuparts summary: | | Version: | 1.2.1.1-5 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Lucas Nussbaum <lucas@lucas-nussbaum.net> |
| Binary: | libmpich2-1.2 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libmpich2-dev | piuparts-result: | successfully-tested 1.4.1-4.2 | Version: | 1.4.1-4.2 |
| Binary: | mpich2 | piuparts-result: | successfully-tested 1.4.1-4.2 | Version: | 1.4.1-4.2 |
| Binary: | mpich2-doc | piuparts-result: | successfully-tested 1.4.1-4.2 | Version: | 1.4.1-4.2 |
| muparser in squeeze2wheezy |
| Source: | muparser | piuparts summary: | | Version: | 1.32-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Gudjon I. Gudjonsson <gudjon@gudjon.org>, Andreas Tille <tille@debian.org> |
| Binary: | libmuparser-dev | piuparts-result: | successfully-tested 2.1.0-3 | Version: | 2.1.0-3 |
| Binary: | libmuparser-doc | piuparts-result: | successfully-tested 2.1.0-3 | Version: | 2.1.0-3 |
| Binary: | libmuparser0 | piuparts-result: | successfully-tested None | Version: | None |
| neartree in squeeze2wheezy |
| Source: | neartree | piuparts summary: | | Version: | 2.1.3-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com> |
| Binary: | libcneartree3 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libcneartree3-dev | piuparts-result: | successfully-tested None | Version: | None |
| netgen in squeeze2wheezy |
| Source: | netgen | piuparts summary: | | Version: | 4.9.12.dfsg-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libnglib-4.9.12 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libnglib-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | netgen | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | netgen-doc | piuparts-result: | successfully-tested None | Version: | None |
| opencascade in squeeze2wheezy |
| Source: | opencascade | piuparts summary: | | Version: | 6.3.0.dfsg.1-6 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libopencascade-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-foundation-6.3.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-foundation-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-modeling-6.3.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-modeling-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-ocaf-6.3.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-ocaf-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-ocaf-lite-6.3.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-ocaf-lite-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-visualization-6.3.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopencascade-visualization-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | opencascade-draw | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | opencascade-examples | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | opencascade-wok | piuparts-result: | successfully-tested None | Version: | None |
| openigtlink in squeeze2wheezy |
| Source: | openigtlink | piuparts summary: | | Version: | 1.0.0~svn6270-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@cs.tu-berlin.de> |
| Binary: | libopenigtlink1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libopenigtlink1-dev | piuparts-result: | successfully-tested 1.9.2~svn7468-1 | Version: | 1.9.2~svn7468-1 |
| Binary: | openigtlink-doc | piuparts-result: | successfully-tested 1.9.2~svn7468-1 | Version: | 1.9.2~svn7468-1 |
| Binary: | openigtlink-examples | piuparts-result: | successfully-tested 1.9.2~svn7468-1 | Version: | 1.9.2~svn7468-1 |
| openturns in squeeze2wheezy |
| Source: | openturns | piuparts summary: | | Version: | 0.13.2-8 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org> |
| Binary: | libopenturns-dbg | piuparts-result: | successfully-tested 1.0-4 | Version: | 1.0-4 |
| Binary: | libopenturns-dev | piuparts-result: | successfully-tested 1.0-4 | Version: | 1.0-4 |
| Binary: | libopenturns0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | openturns-examples | piuparts-result: | successfully-tested 1.0-4 | Version: | 1.0-4 |
| Binary: | openturns-validation | piuparts-result: | successfully-tested 1.0-4 | Version: | 1.0-4 |
| Binary: | openturns-wrapper | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | python-openturns | piuparts-result: | successfully-tested 1.0-4 | Version: | 1.0-4 |
| opticalraytracer in squeeze2wheezy |
| Source: | opticalraytracer | piuparts summary: | | Version: | 2.8-2 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | D Haley <mycae@yahoo.com> |
| Binary: | opticalraytracer | piuparts-result: | successfully-tested 3.2-1.1 | Version: | 3.2-1.1 |
| orsa in squeeze2wheezy |
| Source: | orsa | piuparts summary: | | Version: | 0.7.0-15 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Frank S. Thomas <fst@debian.org> |
| Binary: | liborsa-doc | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | liborsa0-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | liborsa0c2a | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | xorsa | piuparts-result: | successfully-tested None | Version: | None |
| paraview in squeeze2wheezy |
| Source: | paraview | piuparts summary: | | Version: | 3.8.0-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Mathieu Malaterre <mathieu.malaterre@gmail.com>, |
| Binary: | paraview | piuparts-result: | successfully-tested 3.14.1-6 | Version: | 3.14.1-6 |
| petsc in squeeze2wheezy |
| Source: | petsc | piuparts summary: | | Version: | 3.1.dfsg-7 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libpetsc3.1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libpetsc3.1-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libpetsc3.1-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | petsc-dev | piuparts-result: | successfully-tested 3.2.dfsg-6 | Version: | 3.2.dfsg-6 |
| Binary: | petsc3.1-doc | piuparts-result: | successfully-tested None | Version: | None |
| plotdrop in squeeze2wheezy |
| Source: | plotdrop | piuparts summary: | | Version: | 0.5.2-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Jordan Mantha <laserjock@ubuntu.com> |
| Binary: | plotdrop | piuparts-result: | successfully-tested 0.5.2-3 | Version: | 0.5.2-3 |
| polylib in squeeze2wheezy |
| Source: | polylib | piuparts summary: | | Version: | 5.22.5-1+dfsg |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Serge Guelton <serge.guelton@enst-bretagne.fr> |
| Binary: | libpolylib64-8 | piuparts-result: | successfully-tested 5.22.5-3+dfsg | Version: | 5.22.5-3+dfsg |
| Binary: | libpolylib64-8-dbg | piuparts-result: | successfully-tested 5.22.5-3+dfsg | Version: | 5.22.5-3+dfsg |
| Binary: | libpolylib64-dev | piuparts-result: | successfully-tested 5.22.5-3+dfsg | Version: | 5.22.5-3+dfsg |
| Binary: | polylib-utils | piuparts-result: | successfully-tested 5.22.5-3+dfsg | Version: | 5.22.5-3+dfsg |
| polyml in squeeze2wheezy |
| Source: | polyml | piuparts summary: | | Version: | 5.2.1-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Achim D. Brucker <brucker@member.fsf.org>, Lionel Elie Mamane <lmamane@debian.org> |
| Binary: | libpolyml-dev | piuparts-result: | successfully-tested 5.2.1-1.1 | Version: | 5.2.1-1.1 |
| Binary: | libpolyml1 | piuparts-result: | successfully-tested 5.2.1-1.1 | Version: | 5.2.1-1.1 |
| Binary: | polyml | piuparts-result: | successfully-tested 5.2.1-1.1 | Version: | 5.2.1-1.1 |
| qtiplot in squeeze2wheezy |
| Source: | qtiplot | piuparts summary: | | Version: | 0.9.8-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Gudjon I. Gudjonsson <gudjon@gudjon.org>, Andreas Tille <tille@debian.org> |
| Binary: | qtiplot | piuparts-result: | successfully-tested 0.9.8.8-5+b1 | Version: | 0.9.8.8-5+b1 |
| Binary: | qtiplot-doc | piuparts-result: | successfully-tested 0.9.8.8-5 | Version: | 0.9.8.8-5 |
| qwtplot3d in squeeze2wheezy |
| Source: | qwtplot3d | piuparts summary: | | Version: | 0.2.7+svn191-4 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Gudjon I. Gudjonsson <gudjon@gudjon.org>, Andreas Tille <tille@debian.org> |
| Binary: | libqwtplot3d-doc | piuparts-result: | successfully-tested 0.2.7+svn191-7 | Version: | 0.2.7+svn191-7 |
| Binary: | libqwtplot3d-qt3-0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqwtplot3d-qt3-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libqwtplot3d-qt4-0 | piuparts-result: | successfully-tested 0.2.7+svn191-7 | Version: | 0.2.7+svn191-7 |
| Binary: | libqwtplot3d-qt4-dev | piuparts-result: | successfully-tested 0.2.7+svn191-7 | Version: | 0.2.7+svn191-7 |
| r-cran-amore in squeeze2wheezy |
| Source: | r-cran-amore | piuparts summary: | | Version: | 0.2-12-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-amore | piuparts-result: | successfully-tested 0.2-12-2 | Version: | 0.2-12-2 |
| r-cran-colorspace in squeeze2wheezy |
| Source: | r-cran-colorspace | piuparts summary: | | Version: | 1.0.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-colorspace | piuparts-result: | successfully-tested 1.0.1-1+b1 | Version: | 1.0.1-1+b1 |
| r-cran-msm in squeeze2wheezy |
| Source: | r-cran-msm | piuparts summary: | | Version: | 0.9.7-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-msm | piuparts-result: | successfully-tested 1.1-1 | Version: | 1.1-1 |
| r-cran-plotrix in squeeze2wheezy |
| Source: | r-cran-plotrix | piuparts summary: | | Version: | 2.9-3-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-plotrix | piuparts-result: | successfully-tested 3.2-6-1 | Version: | 3.2-6-1 |
| r-cran-sp in squeeze2wheezy |
| Source: | r-cran-sp | piuparts summary: | | Version: | 1:0.9-66-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-sp | piuparts-result: | successfully-tested 1:0.9-81-1 | Version: | 1:0.9-81-1 |
| r-cran-spc in squeeze2wheezy |
| Source: | r-cran-spc | piuparts summary: | | Version: | 0.21-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-spc | piuparts-result: | successfully-tested 1:0.4.1-1 | Version: | 1:0.4.1-1 |
| r-cran-teachingdemos in squeeze2wheezy |
| Source: | r-cran-teachingdemos | piuparts summary: | | Version: | 2.6-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-teachingdemos | piuparts-result: | successfully-tested 2.7-1 | Version: | 2.7-1 |
| r-cran-vcd in squeeze2wheezy |
| Source: | r-cran-vcd | piuparts summary: | | Version: | 1:1.2-8-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-vcd | piuparts-result: | successfully-tested 1:1.2-12-1 | Version: | 1:1.2-12-1 |
| r-cran-xtable in squeeze2wheezy |
| Source: | r-cran-xtable | piuparts summary: | | Version: | 1:1.5-6-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org> |
| Binary: | r-cran-xtable | piuparts-result: | successfully-tested 1:1.5-6-1 | Version: | 1:1.5-6-1 |
| rasmol in squeeze2wheezy |
| Source: | rasmol | piuparts summary: | | Version: | 2.7.5-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Teemu Ikonen <tpikonen@gmail.com> |
| Binary: | rasmol | piuparts-result: | successfully-tested 2.7.5.2-1 | Version: | 2.7.5.2-1 |
| Binary: | rasmol-doc | piuparts-result: | successfully-tested 2.7.5.2-1 | Version: | 2.7.5.2-1 |
| scilab in squeeze2wheezy |
| Source: | scilab | piuparts summary: | | Version: | 5.2.2-9 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org>, Aurélien GÉRÔME <ag@debian.org> |
| Binary: | libscilab-java | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-cli | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-data | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-doc | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-doc-fr | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-doc-pt-br | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-full-bin | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-full-bin-dbg | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-include | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-minimal-bin | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-minimal-bin-dbg | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| Binary: | scilab-test | piuparts-result: | successfully-tested 5.3.3-10 | Version: | 5.3.3-10 |
| scilab-ann in squeeze2wheezy |
| Source: | scilab-ann | piuparts summary: | | Version: | 0.4.2.3-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-ann | piuparts-result: | successfully-tested 0.4.2.4-1 | Version: | 0.4.2.4-1 |
| scilab-celestlab in squeeze2wheezy |
| Source: | scilab-celestlab | piuparts summary: | | Version: | 2.0.1-3-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-celestlab | piuparts-result: | successfully-tested 2.3.0-1-1 | Version: | 2.3.0-1-1 |
| scilab-overload in squeeze2wheezy |
| Source: | scilab-overload | piuparts summary: | | Version: | 1.3.2-3 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-overload | piuparts-result: | successfully-tested None | Version: | None |
| scilab-plotlib in squeeze2wheezy |
| Source: | scilab-plotlib | piuparts summary: | | Version: | 0.41-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-plotlib | piuparts-result: | successfully-tested 0.42-1 | Version: | 0.42-1 |
| scilab-scimax in squeeze2wheezy |
| Source: | scilab-scimax | piuparts summary: | | Version: | 2.1.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-scimax | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | scilab-scimax-doc | piuparts-result: | successfully-tested None | Version: | None |
| scilab-scimysql in squeeze2wheezy |
| Source: | scilab-scimysql | piuparts summary: | | Version: | 0.1.1-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org> |
| Binary: | scilab-scimysql | piuparts-result: | successfully-tested 0.1.1-5 | Version: | 0.1.1-5 |
| scotch in squeeze2wheezy |
| Source: | scotch | piuparts summary: | | Version: | 5.1.8a.dfsg-2 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libptscotch-5.1 | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libptscotch-dbg | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libptscotch-dev | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libscotch-5.1 | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libscotch-dbg | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libscotch-dev | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libscotchmetis-dev | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | libscotchparmetis-dev | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | ptscotch | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | ptscotch-dbg | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | scotch | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| Binary: | scotch-dbg | piuparts-result: | successfully-tested 5.1.12b.dfsg-1.2 | Version: | 5.1.12b.dfsg-1.2 |
| simage in squeeze2wheezy |
| Source: | simage | piuparts summary: | | Version: | 1.7.0-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Steve M. Robbins <smr@debian.org> |
| Binary: | libsimage-dev | piuparts-result: | successfully-tested 1.7.0-1.1+b1 | Version: | 1.7.0-1.1+b1 |
| Binary: | libsimage20 | piuparts-result: | successfully-tested 1.7.0-1.1+b1 | Version: | 1.7.0-1.1+b1 |
| sketch in squeeze2wheezy |
| Source: | sketch | piuparts summary: | | Version: | 1:0.2.170-1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | David Bremner <bremner@unb.ca> |
| Binary: | sketch | piuparts-result: | successfully-tested 1:0.3.7-1 | Version: | 1:0.3.7-1 |
| Binary: | sketch-doc | piuparts-result: | successfully-tested 1:0.3.7-1 | Version: | 1:0.3.7-1 |
| slepc in squeeze2wheezy |
| Source: | slepc | piuparts summary: | | Version: | 3.0.0-p7.dfsg-7.1 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org> |
| Binary: | libslepc3.0.0 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libslepc3.0.0-dbg | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libslepc3.0.0-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | slepc3.0.0-doc | piuparts-result: | successfully-tested None | Version: | None |
| slicer in squeeze2wheezy |
| Source: | slicer | piuparts summary: | | Version: | 3.4.0~svn10438-7 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@debian.org> |
| Binary: | libslicer3 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libslicer3-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | slicer | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | slicer-data | piuparts-result: | successfully-tested None | Version: | None |
| sparskit in squeeze2wheezy |
| Source: | sparskit | piuparts summary: | | Version: | 2.0.0-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@cs.tu-berlin.de> |
| Binary: | libsparskit-dev | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
| Binary: | libsparskit2.0 | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
| spooles in squeeze2wheezy |
| Source: | spooles | piuparts summary: | | Version: | 2.2-8 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | "Adam C. Powell, IV" <hazelsct@debian.org> |
| Binary: | libspooles-dev | piuparts-result: | successfully-tested 2.2-9 | Version: | 2.2-9 |
| Binary: | libspooles2.2 | piuparts-result: | successfully-tested 2.2-9 | Version: | 2.2-9 |
| Binary: | spooles-doc | piuparts-result: | successfully-tested 2.2-9 | Version: | 2.2-9 |
| suitesparse in squeeze2wheezy |
| Source: | suitesparse | piuparts summary: | | Version: | 1:3.4.0-2 |
| Maintainer: | Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Daniel Rus Morales <danirus@tol-project.org> |
| Binary: | libamd2.2.0 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libbtf1.1.0 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libcamd2.2.0 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libccolamd2.7.1 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libcholmod1.7.1 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libcolamd2.7.1 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libcsparse2.2.3 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libcxsparse2.2.3 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libklu1.1.0 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libldl2.0.1 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libsuitesparse-dbg | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libsuitesparse-dev | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libsuitesparse-doc | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| Binary: | libumfpack5.4.0 | piuparts-result: | successfully-tested 1:3.4.0-3 | Version: | 1:3.4.0-3 |
| syrthes in squeeze2wheezy |
| Source: | syrthes | piuparts summary: | | Version: | 3.4.2-dfsg1-3 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Gilles Filippini <gilles.filippini@free.fr> |
| Binary: | syrthes | piuparts-result: | successfully-tested 3.4.3-dfsg1-6 | Version: | 3.4.3-dfsg1-6 |
| teem in squeeze2wheezy |
| Source: | teem | piuparts summary: | | Version: | 1.10.0.dfsg1-2 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Dominique Belhachemi <domibel@cs.tu-berlin.de> |
| Binary: | libteem1 | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | libteem1-dev | piuparts-result: | successfully-tested None | Version: | None |
| Binary: | teem-apps | piuparts-result: | successfully-tested 1.11.0~svn5226-1 | Version: | 1.11.0~svn5226-1 |
| Binary: | teem-doc | piuparts-result: | successfully-tested None | Version: | None |
| texmaker in squeeze2wheezy |
| Source: | texmaker | piuparts summary: | | Version: | 1.9.9-2 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org>, Ruben Molina <rmolina@udea.edu.co> |
| Binary: | texmaker | piuparts-result: | successfully-tested 3.3.4-1 | Version: | 3.3.4-1 |
| Binary: | texmaker-data | piuparts-result: | successfully-tested 3.3.4-1 | Version: | 3.3.4-1 |
| ufc in squeeze2wheezy |
| Source: | ufc | piuparts summary: | | Version: | 1.4.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | python-ufc | piuparts-result: | successfully-tested 2.0.5-3 | Version: | 2.0.5-3 |
| Binary: | ufc | piuparts-result: | successfully-tested 2.0.5-3 | Version: | 2.0.5-3 |
| Binary: | ufc-doc | piuparts-result: | successfully-tested 2.0.5-3 | Version: | 2.0.5-3 |
| ufl in squeeze2wheezy |
| Source: | ufl | piuparts summary: | | Version: | 0.5.3-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | python-ufl | piuparts-result: | successfully-tested 1.0.0-1 | Version: | 1.0.0-1 |
| Binary: | python-ufl-doc | piuparts-result: | successfully-tested 1.0.0-1 | Version: | 1.0.0-1 |
| v-sim in squeeze2wheezy |
| Source: | v-sim | piuparts summary: | | Version: | 3.5.1-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Sylvestre Ledru <sylvestre@debian.org>, Damien Caliste <damien.caliste@cea.fr> |
| Binary: | v-sim | piuparts-result: | successfully-tested 3.6.0-2+b2 | Version: | 3.6.0-2+b2 |
| Binary: | v-sim-common | piuparts-result: | successfully-tested 3.6.0-2 | Version: | 3.6.0-2 |
| Binary: | v-sim-doc | piuparts-result: | successfully-tested 3.6.0-2 | Version: | 3.6.0-2 |
| Binary: | v-sim-plugins | piuparts-result: | successfully-tested 3.6.0-2+b2 | Version: | 3.6.0-2+b2 |
| viewmol in squeeze2wheezy |
| Source: | viewmol | piuparts summary: | | Version: | 2.4.1-15 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Drew Parsons <dparsons@debian.org> |
| Binary: | viewmol | piuparts-result: | successfully-tested 2.4.1-18 | Version: | 2.4.1-18 |
| viper in squeeze2wheezy |
| Source: | viper | piuparts summary: | | Version: | 0.4.6-1 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Christophe Prud'homme <prudhomm@debian.org>, Johannes Ring <johannr@simula.no> |
| Binary: | python-viper | piuparts-result: | successfully-tested 1.0.0-1 | Version: | 1.0.0-1 |
| wordnet in squeeze2wheezy |
| Source: | wordnet | piuparts summary: | | Version: | 1:3.0-24 |
| Maintainer: | Debian Science Team <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Andreas Tille <tille@debian.org>, Dmitry E. Oboukhov <unera@debian.org> |
| Binary: | dict-wn | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | goldendict-wordnet | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet-base | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet-dev | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet-grind | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet-gui | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| Binary: | wordnet-sense-index | piuparts-result: | successfully-tested 1:3.0-29 | Version: | 1:3.0-29 |
| wxmaxima in squeeze2wheezy |
| Source: | wxmaxima | piuparts summary: | | Version: | 0.8.5-2 |
| Maintainer: | Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org> |
| Uploaders: | Frank S. Thomas <fst@debian.org> |
| Binary: | wxmaxima | piuparts-result: | successfully-tested 12.04.0-1 | Version: | 12.04.0-1 |
Quality Assurance
