Start: 2012-12-18 10:44:58 UTC [squeeze] Package: hello-debhelper Priority: extra Section: devel Installed-Size: 652 Maintainer: Santiago Vila Architecture: amd64 Version: 2.6-2 Replaces: hello Provides: hello Depends: libc6 (>= 2.3), dpkg (>= 1.15.4) | install-info Conflicts: hello Filename: pool/main/h/hello-debhelper/hello-debhelper_2.6-2_amd64.deb Size: 61168 MD5sum: 9f8b84590bc8b11c2ff45ad5ab7aa4eb SHA1: 6e75b874f171caa9aa8792743b53c4af562f80a8 SHA256: 55f6a3b132c2a56d6115ea5e3f2eac2133d8e42df5b406dedb92183e1b35a391 Description: The classic greeting, and a good example The GNU hello program produces a familiar, friendly greeting. It allows non-programmers to use a classic computer science tool which would otherwise be unavailable to them. . Seriously, though: this is an example of how to do a Debian package. It is the Debian version of the GNU Project's `hello world' program (which is itself an example for the GNU Project). . This is the same as the hello package, except it uses debhelper to make the deb. Please see debhelper as to what it is. Homepage: http://www.gnu.org/software/hello/ Tag: devel::examples, devel::packaging, interface::commandline, suite::debian [wheezy] Package: hello-debhelper Version: 2.8-1 Installed-Size: 551 Maintainer: Santiago Vila Architecture: amd64 Replaces: hello Provides: hello Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info Conflicts: hello Description: The classic greeting, and a good example Homepage: http://www.gnu.org/software/hello/ Description-md5: b5040bf1400ca86808cb22ddf3c17197 Tag: devel::examples, devel::packaging, interface::commandline, suite::debian Section: devel Priority: extra Filename: pool/main/h/hello-debhelper/hello-debhelper_2.8-1_amd64.deb Size: 69944 MD5sum: 05e4a353c2533d345cce7c4ac03b8472 SHA1: eedd48d6db46a042bfb7842e22cc068292ae749e SHA256: 29116a53b8dfc1a863a39ae75ee2578ef0668b618e257aae37184055aebd0c8c Executing: sudo /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-leftovers-after-purge --no-eatmydata -i /etc/shells --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b squeeze.tar.gz -d squeeze -d wheezy --apt hello-debhelper=2.8-1 Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.49~201212111628~0.48-33-gc3b7b47 starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-leftovers-after-purge' '--no-eatmydata' '-i' '/etc/shells' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' 'squeeze.tar.gz' '-d' 'squeeze' '-d' 'wheezy' '--apt' 'hello-debhelper=2.8-1' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp4JuTvP 0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmp4JuTvP 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp4JuTvP', '-zxf', 'squeeze.tar.gz'] 0m5.5s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp4JuTvP', '-zxf', 'squeeze.tar.gz'] 0m5.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'mount', '-t', 'proc', 'proc', '/proc'] 0m5.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'mount', '-t', 'proc', 'proc', '/proc'] 0m5.6s DEBUG: Created policy-rc.d and chmodded it. 0m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'update'] 0m5.6s DUMP: Hit http://piatti.debian.org squeeze Release.gpg Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en Ign http://piatti.debian.org/debian/ squeeze/main Translation-en Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en Hit http://piatti.debian.org squeeze Release Hit http://piatti.debian.org squeeze/main amd64 Packages Hit http://piatti.debian.org squeeze/contrib amd64 Packages Hit http://piatti.debian.org squeeze/non-free amd64 Packages Reading package lists... 0m5.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'update'] 0m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', '-yf', 'dist-upgrade'] 0m5.9s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m5.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', '-yf', 'dist-upgrade'] 0m6.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmp4JuTvP/tmp/scripts/ 0m6.0s INFO: Running scripts post_setup 0m6.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'tmp/scripts/post_setup_forbid_home'] 0m6.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'tmp/scripts/post_setup_forbid_home'] 0m6.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp4JuTvP to wheezy 0m6.0s INFO: Running scripts pre_distupgrade 0m6.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'update'] 0m15.3s DUMP: Get:1 http://piatti.debian.org wheezy Release.gpg [836 B] Ign http://piatti.debian.org/debian/ wheezy/contrib Translation-en Ign http://piatti.debian.org/debian/ wheezy/main Translation-en Ign http://piatti.debian.org/debian/ wheezy/non-free Translation-en Get:2 http://piatti.debian.org wheezy Release [215 kB] Get:3 http://piatti.debian.org wheezy/main amd64 Packages [7826 kB] Get:4 http://piatti.debian.org wheezy/contrib amd64 Packages [52.7 kB] Get:5 http://piatti.debian.org wheezy/non-free amd64 Packages [102 kB] Fetched 8196 kB in 1s (7606 kB/s) Reading package lists... 0m15.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'update'] 0m15.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', '-yf', 'dist-upgrade'] 0m43.3s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: gcc-4.7-base libapt-pkg4.12 libdb5.1 liblzma5 libmount1 libpam-modules-bin libsemanage-common libsemanage1 libtinfo5 libustr-1.0-1 multiarch-support The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.4-base gnupg gpgv grep gzip hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libusb-0.1-4 libuuid1 login lsb-base mawk mount ncurses-base ncurses-bin passwd perl-base readline-common sed sensible-utils sysv-rc sysvinit sysvinit-utils tar tzdata util-linux xz-utils zlib1g 66 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8 MB of archives. After this operation, 2415 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ wheezy/main sensible-utils all 0.0.7 [8850 B] Get:2 http://piatti.debian.org/debian/ wheezy/main debianutils amd64 4.3.2 [78.9 kB] Get:3 http://piatti.debian.org/debian/ wheezy/main libc-bin amd64 2.13-37 [1271 kB] Get:4 http://piatti.debian.org/debian/ wheezy/main libc6 amd64 2.13-37 [4345 kB] Get:5 http://piatti.debian.org/debian/ wheezy/main gcc-4.7-base amd64 4.7.2-4 [144 kB] Get:6 http://piatti.debian.org/debian/ wheezy/main multiarch-support amd64 2.13-37 [149 kB] Get:7 http://piatti.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.7.2-4 [43.1 kB] Get:8 http://piatti.debian.org/debian/ wheezy/main libsemanage-common all 2.1.6-6 [23.2 kB] Get:9 http://piatti.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.4-3 [135 kB] Get:10 http://piatti.debian.org/debian/ wheezy/main libustr-1.0-1 amd64 1.0.4-3 [92.5 kB] Get:11 http://piatti.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-4 [46.5 kB] Get:12 http://piatti.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.9-5 [90.6 kB] Get:13 http://piatti.debian.org/debian/ wheezy/main libsemanage1 amd64 2.1.6-6 [102 kB] Get:14 http://piatti.debian.org/debian/ wheezy/main debconf all 1.5.46 [174 kB] Get:15 http://piatti.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-7.1 [128 kB] Get:16 http://piatti.debian.org/debian/ wheezy/main libdb5.1 amd64 5.1.29-5 [723 kB] Get:17 http://piatti.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-7.1 [113 kB] Get:18 http://piatti.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-7.1 [348 kB] Get:19 http://piatti.debian.org/debian/ wheezy/main passwd amd64 1:4.1.5.1-1 [1259 kB] Get:20 http://piatti.debian.org/debian/ wheezy/main libuuid1 amd64 2.20.1-5.2 [57.1 kB] Get:21 http://piatti.debian.org/debian/ wheezy/main libblkid1 amd64 2.20.1-5.2 [120 kB] Get:22 http://piatti.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-15 [551 kB] Get:23 http://piatti.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-10 [275 kB] Get:24 http://piatti.debian.org/debian/ wheezy/main lsb-base all 4.1+Debian8 [26.3 kB] Get:25 http://piatti.debian.org/debian/ wheezy/main tzdata all 2012g-1 [470 kB] Get:26 http://piatti.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20120614-2 [202 kB] Get:27 http://piatti.debian.org/debian/ wheezy/main dpkg amd64 1.16.9 [2561 kB] Get:28 http://piatti.debian.org/debian/ wheezy/main util-linux amd64 2.20.1-5.2 [664 kB] Get:29 http://piatti.debian.org/debian/ wheezy/main insserv amd64 1.14.0-5 [64.8 kB] Get:30 http://piatti.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-34 [101 kB] Get:31 http://piatti.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-34 [80.2 kB] Get:32 http://piatti.debian.org/debian/ wheezy/main libmount1 amd64 2.20.1-5.2 [120 kB] Get:33 http://piatti.debian.org/debian/ wheezy/main mount amd64 2.20.1-5.2 [213 kB] Get:34 http://piatti.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-8 [19.8 kB] Get:35 http://piatti.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-8 [30.1 kB] Get:36 http://piatti.debian.org/debian/ wheezy/main coreutils amd64 8.13-3.4 [5616 kB] Get:37 http://piatti.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-34 [92.3 kB] Get:38 http://piatti.debian.org/debian/ wheezy/main base-files amd64 6.11 [71.0 kB] Get:39 http://piatti.debian.org/debian/ wheezy/main bash amd64 4.2-4 [1497 kB] Get:40 http://piatti.debian.org/debian/ wheezy/main dash amd64 0.5.7-3 [113 kB] Get:41 http://piatti.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-6 [366 kB] Get:42 http://piatti.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42.5-1 [56.1 kB] Get:43 http://piatti.debian.org/debian/ wheezy/main e2fslibs amd64 1.42.5-1 [197 kB] Get:44 http://piatti.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42.5-1 [979 kB] Get:45 http://piatti.debian.org/debian/ wheezy/main findutils amd64 4.4.2-4 [694 kB] Get:46 http://piatti.debian.org/debian/ wheezy/main grep amd64 2.12-2 [454 kB] Get:47 http://piatti.debian.org/debian/ wheezy/main gzip amd64 1.5-1.1 [119 kB] Get:48 http://piatti.debian.org/debian/ wheezy/main hostname amd64 3.11 [15.0 kB] Get:49 http://piatti.debian.org/debian/ wheezy/main login amd64 1:4.1.5.1-1 [983 kB] Get:50 http://piatti.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-10 [335 kB] Get:51 http://piatti.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB] Get:52 http://piatti.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB] Get:53 http://piatti.debian.org/debian/ wheezy/main perl-base amd64 5.14.2-16 [1523 kB] Get:54 http://piatti.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB] Get:55 http://piatti.debian.org/debian/ wheezy/main sed amd64 4.2.1-10 [251 kB] Get:56 http://piatti.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-34 [133 kB] Get:57 http://piatti.debian.org/debian/ wheezy/main tar amd64 1.26-4 [982 kB] Get:58 http://piatti.debian.org/debian/ wheezy/main base-passwd amd64 3.5.26 [46.3 kB] Get:59 http://piatti.debian.org/debian/ wheezy/main bsdutils amd64 1:2.20.1-5.2 [85.7 kB] Get:60 http://piatti.debian.org/debian/ wheezy/main ncurses-base all 5.9-10 [198 kB] Get:61 http://piatti.debian.org/debian/ wheezy/main libstdc++6 amd64 4.7.2-4 [332 kB] Get:62 http://piatti.debian.org/debian/ wheezy/main zlib1g amd64 1:1.2.7.dfsg-13 [87.4 kB] Get:63 http://piatti.debian.org/debian/ wheezy/main gpgv amd64 1.4.12-6 [226 kB] Get:64 http://piatti.debian.org/debian/ wheezy/main debian-archive-keyring all 2012.4 [30.4 kB] Get:65 http://piatti.debian.org/debian/ wheezy/main readline-common all 6.2-8 [55.3 kB] Get:66 http://piatti.debian.org/debian/ wheezy/main libreadline6 amd64 6.2-8 [166 kB] Get:67 http://piatti.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-20+nmu1 [23.1 kB] Get:68 http://piatti.debian.org/debian/ wheezy/main gnupg amd64 1.4.12-6 [1952 kB] Get:69 http://piatti.debian.org/debian/ wheezy/main libapt-pkg4.12 amd64 0.9.7.6 [890 kB] Get:70 http://piatti.debian.org/debian/ wheezy/main apt amd64 0.9.7.6 [1241 kB] Get:71 http://piatti.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-10 [113 kB] Get:72 http://piatti.debian.org/debian/ wheezy/main libss2 amd64 1.42.5-1 [61.4 kB] Get:73 http://piatti.debian.org/debian/ wheezy/main mawk amd64 1.3.3-17 [90.8 kB] Get:74 http://piatti.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-7.1 [228 kB] Get:75 http://piatti.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20120614-2 [237 kB] Get:76 http://piatti.debian.org/debian/ wheezy/main debconf-i18n all 1.5.46 [236 kB] Get:77 http://piatti.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.7-2 [127 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.8 MB in 1s (28.5 MB/s) (Reading database ... 6146 files and directories currently installed.) Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.7_all.deb) ... Unpacking replacement sensible-utils ... Setting up sensible-utils (0.0.7) ... (Reading database ... 6158 files and directories currently installed.) Preparing to replace debianutils 3.4 (using .../debianutils_4.3.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (4.3.2) ... (Reading database ... 6184 files and directories currently installed.) Preparing to replace libc-bin 2.11.3-4 (using .../libc-bin_2.13-37_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-37) ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 6201 files and directories currently installed.) Preparing to replace libc6 2.11.3-4 (using .../libc6_2.13-37_amd64.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-37) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.7-base. (Reading database ... 6206 files and directories currently installed.) Unpacking gcc-4.7-base (from .../gcc-4.7-base_4.7.2-4_amd64.deb) ... Setting up gcc-4.7-base (4.7.2-4) ... Selecting previously deselected package multiarch-support. (Reading database ... 6213 files and directories currently installed.) Unpacking multiarch-support (from .../multiarch-support_2.13-37_amd64.deb) ... Setting up multiarch-support (2.13-37) ... (Reading database ... 6217 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.7.2-4_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.7.2-4) ... Selecting previously deselected package libsemanage-common. (Reading database ... 6217 files and directories currently installed.) Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ... Setting up libsemanage-common (2.1.6-6) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.4-3_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.1.4-3) ... Selecting previously deselected package libustr-1.0-1. (Reading database ... 6224 files and directories currently installed.) Unpacking libustr-1.0-1 (from .../libustr-1.0-1_1.0.4-3_amd64.deb) ... Setting up libustr-1.0-1 (1.0.4-3) ... (Reading database ... 6235 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-6+squeeze1 (using .../libbz2-1.0_1.0.6-4_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.6-4) ... (Reading database ... 6235 files and directories currently installed.) Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.9-5_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.1.9-5) ... Selecting previously deselected package libsemanage1. (Reading database ... 6235 files and directories currently installed.) Unpacking libsemanage1 (from .../libsemanage1_2.1.6-6_amd64.deb) ... Setting up libsemanage1 (2.1.6-6) ... (Reading database ... 6240 files and directories currently installed.) Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.46_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.46) ... (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-6.1+squeeze1 (using .../libpam0g_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.3-7.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Selecting previously deselected package libdb5.1. (Reading database ... 6243 files and directories currently installed.) Unpacking libdb5.1 (from .../libdb5.1_5.1.29-5_amd64.deb) ... Setting up libdb5.1 (5.1.29-5) ... Selecting previously deselected package libpam-modules-bin. (Reading database ... 6249 files and directories currently installed.) Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_amd64.deb) ... Replacing files in old package libpam-modules ... Setting up libpam-modules-bin (1.1.3-7.1) ... (Reading database ... 6255 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-6.1+squeeze1 (using .../libpam-modules_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.3-7.1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 6254 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.5.1-1) ... (Reading database ... 6274 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.20.1-5.2_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.20.1-5.2) ... (Reading database ... 6274 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.20.1-5.2_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.20.1-5.2) ... (Reading database ... 6274 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-15_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.4-15) ... Selecting previously deselected package libtinfo5. (Reading database ... 6272 files and directories currently installed.) Unpacking libtinfo5 (from .../libtinfo5_5.9-10_amd64.deb) ... Setting up libtinfo5 (5.9-10) ... (Reading database ... 6281 files and directories currently installed.) Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_4.1+Debian8_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.1+Debian8) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace tzdata 2012c-0squeeze1 (using .../tzdata_2012g-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012g-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Dec 18 10:45:34 UTC 2012. Universal Time is now: Tue Dec 18 10:45:34 UTC 2012. Run 'dpkg-reconfigure tzdata' if you wish to change it. Selecting previously deselected package liblzma5. (Reading database ... 6283 files and directories currently installed.) Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20120614-2_amd64.deb) ... Setting up liblzma5 (5.1.1alpha+20120614-2) ... (Reading database ... 6292 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../archives/dpkg_1.16.9_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.9) ... (Reading database ... 6303 files and directories currently installed.) Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.20.1-5.2_amd64.deb) ... Removing obsolete conffile /etc/init.d/hwclockfirst.sh ... Unpacking replacement util-linux ... Setting up util-linux (2.20.1-5.2) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 6298 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-5_amd64.deb) ... Unpacking replacement insserv ... Setting up insserv (1.14.0-5) ... Installing new version of config file /etc/insserv.conf ... (Reading database ... 6288 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1+squeeze1 (using .../sysvinit-utils_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-34) ... (Reading database ... 6290 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1+squeeze1 (using .../sysv-rc_2.88dsf-34_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-34) ... Selecting previously unselected package libmount1. (Reading database ... 6291 files and directories currently installed.) Unpacking libmount1 (from .../libmount1_2.20.1-5.2_amd64.deb) ... Setting up libmount1 (2.20.1-5.2) ... (Reading database ... 6297 files and directories currently installed.) Preparing to replace mount 2.17.2-9 (using .../mount_2.20.1-5.2_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.20.1-5.2) ... (Reading database ... 6299 files and directories currently installed.) Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-8_amd64.deb) ... Unpacking replacement libattr1:amd64 ... Setting up libattr1:amd64 (1:2.4.46-8) ... (Reading database ... 6300 files and directories currently installed.) Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-8_amd64.deb) ... Unpacking replacement libacl1:amd64 ... Setting up libacl1:amd64 (2.2.51-8) ... (Reading database ... 6300 files and directories currently installed.) Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3.4_amd64.deb) ... Unpacking replacement coreutils ... Setting up coreutils (8.13-3.4) ... (Reading database ... 6221 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1+squeeze1 (using .../initscripts_2.88dsf-34_amd64.deb) ... Removing unmodified and obsolete conffile /etc/default/bootlogd ... Removing unmodified and obsolete conffile /etc/init.d/mountoverflowtmp ... Upgrading unmodified configuration file /etc/default/rcS ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-34) ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountall-bootclean.sh ... Installing new version of config file /etc/init.d/mountnfs.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/umountroot ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/default/tmpfs ... Installing new version of config file /etc/network/if-up.d/mountnfs ... guest environment detected: Linking /run to /var/run guest environment detected: Linking /run/lock to /var/lock guest environment detected: Linking /dev/shm to /run/shm (Reading database ... 6221 files and directories currently installed.) Preparing to replace base-files 6.0squeeze6 (using .../base-files_6.11_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.11) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating unmodified /etc/profile to current default. (Reading database ... 6224 files and directories currently installed.) Preparing to replace bash 4.1-3 (using .../archives/bash_4.2-4_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.2-4) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 6227 files and directories currently installed.) Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-3_amd64.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3) ... (Reading database ... 6227 files and directories currently installed.) Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-6_amd64.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.2-6) ... (Reading database ... 6228 files and directories currently installed.) Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42.5-1_amd64.deb) ... Unpacking replacement libcomerr2:amd64 ... Setting up libcomerr2:amd64 (1.42.5-1) ... (Reading database ... 6228 files and directories currently installed.) Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fslibs:amd64 ... Setting up e2fslibs:amd64 (1.42.5-1) ... (Reading database ... 6228 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace findutils 4.4.2-1+b1 (using .../findutils_4.4.2-4_amd64.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-4) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace grep 2.6.3-3 (using .../archives/grep_2.12-2_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.12-2) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace gzip 1.3.12-9 (using .../gzip_1.5-1.1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.5-1.1) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace hostname 3.04 (using .../hostname_3.11_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.11) ... (Reading database ... 6223 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.5.1-1) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... (Reading database ... 6238 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-10_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-10) ... (Reading database ... 6240 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Preparing to replace perl-base 5.10.1-17squeeze3 (using .../perl-base_5.14.2-16_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.14.2-16) ... (Reading database ... 6669 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Preparing to replace sed 4.2.1-7 (using .../sed_4.2.1-10_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-10) ... (Reading database ... 6669 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1+squeeze1 (using .../sysvinit_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-34) ... sysvinit: creating /run/initctl Not restarting sysvinit: chroot detected (Reading database ... 6669 files and directories currently installed.) Preparing to replace tar 1.23-3 (using .../archives/tar_1.26-4_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.26-4) ... (Reading database ... 6670 files and directories currently installed.) Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.26_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.26) ... (Reading database ... 6672 files and directories currently installed.) Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.20.1-5.2_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.20.1-5.2) ... (Reading database ... 6672 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-10_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-10) ... Installing new version of config file /etc/terminfo/README ... (Reading database ... 6674 files and directories currently installed.) Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.7.2-4_amd64.deb) ... Unpacking replacement libstdc++6:amd64 ... Setting up libstdc++6:amd64 (4.7.2-4) ... (Reading database ... 6674 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.4.dfsg-3 (using .../zlib1g_1%3a1.2.7.dfsg-13_amd64.deb) ... Unpacking replacement zlib1g:amd64 ... Setting up zlib1g:amd64 (1:1.2.7.dfsg-13) ... (Reading database ... 6674 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4 (using .../gpgv_1.4.12-6_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.12-6) ... (Reading database ... 6674 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28+squeeze1 (using .../debian-archive-keyring_2012.4_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2012.4) ... (Reading database ... 6678 files and directories currently installed.) Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2-8_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2-8) ... (Reading database ... 6678 files and directories currently installed.) Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2-8_amd64.deb) ... Unpacking replacement libreadline6:amd64 ... Setting up libreadline6:amd64 (6.2-8) ... (Reading database ... 6678 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-20+nmu1_amd64.deb) ... Unpacking replacement libusb-0.1-4:amd64 ... Setting up libusb-0.1-4:amd64 (2:0.1.12-20+nmu1) ... (Reading database ... 6677 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4 (using .../gnupg_1.4.12-6_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.12-6) ... Selecting previously unselected package libapt-pkg4.12:amd64. dpkg: considering deconfiguration of apt, which would be broken by installation of libapt-pkg4.12:amd64 ... dpkg: yes, will deconfigure apt (broken by libapt-pkg4.12:amd64) (Reading database ... 6666 files and directories currently installed.) Unpacking libapt-pkg4.12:amd64 (from .../libapt-pkg4.12_0.9.7.6_amd64.deb) ... De-configuring apt ... Setting up libapt-pkg4.12:amd64 (0.9.7.6) ... (Reading database ... 6714 files and directories currently installed.) Preparing to replace apt 0.8.10.3+squeeze1 (using .../archives/apt_0.9.7.6_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.6) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 gpg: checking the trustdb gpg: WARNING: digest algorithm MD5 is deprecated gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information gpg: no ultimately trusted keys found (Reading database ... 6625 files and directories currently installed.) Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-10_amd64.deb) ... Unpacking replacement libncurses5:amd64 ... Setting up libncurses5:amd64 (5.9-10) ... (Reading database ... 6617 files and directories currently installed.) Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42.5-1_amd64.deb) ... Unpacking replacement libss2:amd64 ... Setting up libss2:amd64 (1.42.5-1) ... (Reading database ... 6617 files and directories currently installed.) Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-17_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libpam-runtime 1.1.1-6.1+squeeze1 (using .../libpam-runtime_1.1.3-7.1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7.1) ... (Reading database ... 6618 files and directories currently installed.) Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20120614-2_amd64.deb) ... Unpacking replacement xz-utils ... Setting up xz-utils (5.1.1alpha+20120614-2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode (Reading database ... 6620 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.46_all.deb) ... Unpacking replacement debconf-i18n ... Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.7-2_amd64.deb) ... Unpacking replacement gcc-4.4-base:amd64 ... Setting up libtext-charwidth-perl (0.04-7+b1) ... Setting up libtext-iconv-perl (1.7-5) ... Setting up liblocale-gettext-perl (1.05-7+b1) ... Setting up mawk (1.3.3-17) ... Setting up debconf-i18n (1.5.46) ... Setting up gcc-4.4-base:amd64 (4.4.7-2) ... 0m43.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', '-yf', 'dist-upgrade'] 0m43.3s INFO: Running scripts post_distupgrade 0m43.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m43.3s DUMP: FIXING /usr/share/keyrings/debian-archive-removed-keys.gpg~ `/usr/share/keyrings/debian-archive-removed-keys.gpg~' -> `/usr/share/keyrings/debian-archive-removed-keys.gpg' 0m43.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m43.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m43.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m43.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m43.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m43.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'clean'] 0m43.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'apt-get', 'clean'] 0m44.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'dpkg', '--get-selections', '*'] 0m44.6s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs:amd64 install e2fsprogs install findutils install gcc-4.4-base:amd64 install gcc-4.7-base:amd64 install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1:amd64 install libapt-pkg4.12:amd64 install libattr1:amd64 install libblkid1:amd64 install libbz2-1.0:amd64 install libc-bin install libc6:amd64 install libcomerr2:amd64 install libdb4.8 install libdb5.1:amd64 install libgcc1:amd64 install liblocale-gettext-perl install liblzma2 install liblzma5:amd64 install libmount1 install libncurses5:amd64 install libpam-modules:amd64 install libpam-modules-bin install libpam-runtime install libpam0g:amd64 install libreadline6:amd64 install libselinux1:amd64 install libsemanage-common install libsemanage1:amd64 install libsepol1:amd64 install libslang2:amd64 install libss2:amd64 install libstdc++6:amd64 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtinfo5:amd64 install libusb-0.1-4:amd64 install libustr-1.0-1:amd64 install libuuid1:amd64 install login install lsb-base install mawk install mount install multiarch-support install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g:amd64 install 0m44.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'dpkg', '--get-selections', '*'] 0m44.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'dpkg-divert', '--list'] 0m44.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m44.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'dpkg-divert', '--list'] 0m44.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'umount', '/proc'] 0m44.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4JuTvP', 'umount', '/proc'] 0m44.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m45.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp4JuTvP'] 0m45.1s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp4JuTvP 0m45.1s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m45.1s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpcNSbEA 0m45.1s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpcNSbEA 0m45.1s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpcNSbEA', '-zxf', 'squeeze.tar.gz'] 0m47.4s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpcNSbEA', '-zxf', 'squeeze.tar.gz'] 0m47.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'mount', '-t', 'proc', 'proc', '/proc'] 0m47.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'mount', '-t', 'proc', 'proc', '/proc'] 0m47.4s DEBUG: Created policy-rc.d and chmodded it. 0m47.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'update'] 0m47.5s DUMP: Hit http://piatti.debian.org squeeze Release.gpg Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en Ign http://piatti.debian.org/debian/ squeeze/main Translation-en Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en Hit http://piatti.debian.org squeeze Release Hit http://piatti.debian.org squeeze/main amd64 Packages Hit http://piatti.debian.org squeeze/contrib amd64 Packages Hit http://piatti.debian.org squeeze/non-free amd64 Packages Reading package lists... 0m47.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'update'] 0m47.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-yf', 'dist-upgrade'] 0m47.9s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m47.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-yf', 'dist-upgrade'] 0m47.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpcNSbEA/tmp/scripts/ 0m47.9s INFO: Running scripts post_setup 0m47.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_setup_forbid_home'] 0m47.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_setup_forbid_home'] 0m47.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 0m48.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 0m48.2s INFO: Running scripts pre_test 0m48.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_test_root_password'] 0m54.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_test_root_password'] 0m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'show', 'hello-debhelper'] 0m54.1s DUMP: Package: hello-debhelper Priority: extra Section: devel Installed-Size: 652 Maintainer: Santiago Vila Architecture: amd64 Version: 2.6-2 Replaces: hello Provides: hello Depends: libc6 (>= 2.3), dpkg (>= 1.15.4) | install-info Conflicts: hello Filename: pool/main/h/hello-debhelper/hello-debhelper_2.6-2_amd64.deb Size: 61168 MD5sum: 9f8b84590bc8b11c2ff45ad5ab7aa4eb SHA1: 6e75b874f171caa9aa8792743b53c4af562f80a8 SHA256: 55f6a3b132c2a56d6115ea5e3f2eac2133d8e42df5b406dedb92183e1b35a391 Description: The classic greeting, and a good example The GNU hello program produces a familiar, friendly greeting. It allows non-programmers to use a classic computer science tool which would otherwise be unavailable to them. . Seriously, though: this is an example of how to do a Debian package. It is the Debian version of the GNU Project's `hello world' program (which is itself an example for the GNU Project). . This is the same as the hello package, except it uses debhelper to make the deb. Please see debhelper as to what it is. Homepage: http://www.gnu.org/software/hello/ Tag: devel::examples, devel::packaging, interface::commandline, suite::debian 0m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'show', 'hello-debhelper'] 0m54.1s INFO: apt-cache knows about the following packages: hello-debhelper 0m54.1s INFO: Running scripts pre_install 0m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 0m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 0m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 0m54.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.6,o=Debian,a=stable,n=squeeze,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.6,o=Debian,a=stable,n=squeeze,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.6,o=Debian,a=stable,n=squeeze,l=Debian,c=main origin piatti.debian.org Pinned packages: 0m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 0m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 0m54.1s DUMP: hello-debhelper: Installed: (none) Candidate: 2.6-2 Version table: 2.6-2 0 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages 0m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 0m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper'] 0m55.2s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: hello-debhelper 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 61.2 kB of archives. After this operation, 668 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ squeeze/main hello-debhelper amd64 2.6-2 [61.2 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 61.2 kB in 0s (127 kB/s) Selecting previously deselected package hello-debhelper. (Reading database ... 6146 files and directories currently installed.) Unpacking hello-debhelper (from .../hello-debhelper_2.6-2_amd64.deb) ... Setting up hello-debhelper (2.6-2) ... 0m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper'] 0m55.2s INFO: Running scripts post_install 0m55.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 0m55.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 0m55.4s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpcNSbEA to wheezy 0m55.4s INFO: Running scripts pre_distupgrade 0m55.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'update'] 0m58.5s DUMP: Get:1 http://piatti.debian.org wheezy Release.gpg [836 B] Ign http://piatti.debian.org/debian/ wheezy/contrib Translation-en Ign http://piatti.debian.org/debian/ wheezy/main Translation-en Ign http://piatti.debian.org/debian/ wheezy/non-free Translation-en Get:2 http://piatti.debian.org wheezy Release [215 kB] Get:3 http://piatti.debian.org wheezy/main amd64 Packages [7826 kB] Get:4 http://piatti.debian.org wheezy/contrib amd64 Packages [52.7 kB] Get:5 http://piatti.debian.org wheezy/non-free amd64 Packages [102 kB] Fetched 8196 kB in 1s (7668 kB/s) Reading package lists... 0m58.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'update'] 0m58.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-yf', 'dist-upgrade'] 1m25.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: gcc-4.7-base libapt-pkg4.12 libdb5.1 liblzma5 libmount1 libpam-modules-bin libsemanage-common libsemanage1 libtinfo5 libustr-1.0-1 multiarch-support The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.4-base gnupg gpgv grep gzip hello-debhelper hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libusb-0.1-4 libuuid1 login lsb-base mawk mount ncurses-base ncurses-bin passwd perl-base readline-common sed sensible-utils sysv-rc sysvinit sysvinit-utils tar tzdata util-linux xz-utils zlib1g 67 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 35.9 MB of archives. After this operation, 2518 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ wheezy/main sensible-utils all 0.0.7 [8850 B] Get:2 http://piatti.debian.org/debian/ wheezy/main debianutils amd64 4.3.2 [78.9 kB] Get:3 http://piatti.debian.org/debian/ wheezy/main libc-bin amd64 2.13-37 [1271 kB] Get:4 http://piatti.debian.org/debian/ wheezy/main libc6 amd64 2.13-37 [4345 kB] Get:5 http://piatti.debian.org/debian/ wheezy/main gcc-4.7-base amd64 4.7.2-4 [144 kB] Get:6 http://piatti.debian.org/debian/ wheezy/main multiarch-support amd64 2.13-37 [149 kB] Get:7 http://piatti.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.7.2-4 [43.1 kB] Get:8 http://piatti.debian.org/debian/ wheezy/main libsemanage-common all 2.1.6-6 [23.2 kB] Get:9 http://piatti.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.4-3 [135 kB] Get:10 http://piatti.debian.org/debian/ wheezy/main libustr-1.0-1 amd64 1.0.4-3 [92.5 kB] Get:11 http://piatti.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-4 [46.5 kB] Get:12 http://piatti.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.9-5 [90.6 kB] Get:13 http://piatti.debian.org/debian/ wheezy/main libsemanage1 amd64 2.1.6-6 [102 kB] Get:14 http://piatti.debian.org/debian/ wheezy/main debconf all 1.5.46 [174 kB] Get:15 http://piatti.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-7.1 [128 kB] Get:16 http://piatti.debian.org/debian/ wheezy/main libdb5.1 amd64 5.1.29-5 [723 kB] Get:17 http://piatti.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-7.1 [113 kB] Get:18 http://piatti.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-7.1 [348 kB] Get:19 http://piatti.debian.org/debian/ wheezy/main passwd amd64 1:4.1.5.1-1 [1259 kB] Get:20 http://piatti.debian.org/debian/ wheezy/main libuuid1 amd64 2.20.1-5.2 [57.1 kB] Get:21 http://piatti.debian.org/debian/ wheezy/main libblkid1 amd64 2.20.1-5.2 [120 kB] Get:22 http://piatti.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-15 [551 kB] Get:23 http://piatti.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-10 [275 kB] Get:24 http://piatti.debian.org/debian/ wheezy/main lsb-base all 4.1+Debian8 [26.3 kB] Get:25 http://piatti.debian.org/debian/ wheezy/main tzdata all 2012g-1 [470 kB] Get:26 http://piatti.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20120614-2 [202 kB] Get:27 http://piatti.debian.org/debian/ wheezy/main dpkg amd64 1.16.9 [2561 kB] Get:28 http://piatti.debian.org/debian/ wheezy/main util-linux amd64 2.20.1-5.2 [664 kB] Get:29 http://piatti.debian.org/debian/ wheezy/main insserv amd64 1.14.0-5 [64.8 kB] Get:30 http://piatti.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-34 [101 kB] Get:31 http://piatti.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-34 [80.2 kB] Get:32 http://piatti.debian.org/debian/ wheezy/main libmount1 amd64 2.20.1-5.2 [120 kB] Get:33 http://piatti.debian.org/debian/ wheezy/main mount amd64 2.20.1-5.2 [213 kB] Get:34 http://piatti.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-8 [19.8 kB] Get:35 http://piatti.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-8 [30.1 kB] Get:36 http://piatti.debian.org/debian/ wheezy/main coreutils amd64 8.13-3.4 [5616 kB] Get:37 http://piatti.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-34 [92.3 kB] Get:38 http://piatti.debian.org/debian/ wheezy/main base-files amd64 6.11 [71.0 kB] Get:39 http://piatti.debian.org/debian/ wheezy/main bash amd64 4.2-4 [1497 kB] Get:40 http://piatti.debian.org/debian/ wheezy/main dash amd64 0.5.7-3 [113 kB] Get:41 http://piatti.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-6 [366 kB] Get:42 http://piatti.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42.5-1 [56.1 kB] Get:43 http://piatti.debian.org/debian/ wheezy/main e2fslibs amd64 1.42.5-1 [197 kB] Get:44 http://piatti.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42.5-1 [979 kB] Get:45 http://piatti.debian.org/debian/ wheezy/main findutils amd64 4.4.2-4 [694 kB] Get:46 http://piatti.debian.org/debian/ wheezy/main grep amd64 2.12-2 [454 kB] Get:47 http://piatti.debian.org/debian/ wheezy/main gzip amd64 1.5-1.1 [119 kB] Get:48 http://piatti.debian.org/debian/ wheezy/main hostname amd64 3.11 [15.0 kB] Get:49 http://piatti.debian.org/debian/ wheezy/main login amd64 1:4.1.5.1-1 [983 kB] Get:50 http://piatti.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-10 [335 kB] Get:51 http://piatti.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB] Get:52 http://piatti.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB] Get:53 http://piatti.debian.org/debian/ wheezy/main perl-base amd64 5.14.2-16 [1523 kB] Get:54 http://piatti.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB] Get:55 http://piatti.debian.org/debian/ wheezy/main sed amd64 4.2.1-10 [251 kB] Get:56 http://piatti.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-34 [133 kB] Get:57 http://piatti.debian.org/debian/ wheezy/main tar amd64 1.26-4 [982 kB] Get:58 http://piatti.debian.org/debian/ wheezy/main base-passwd amd64 3.5.26 [46.3 kB] Get:59 http://piatti.debian.org/debian/ wheezy/main bsdutils amd64 1:2.20.1-5.2 [85.7 kB] Get:60 http://piatti.debian.org/debian/ wheezy/main ncurses-base all 5.9-10 [198 kB] Get:61 http://piatti.debian.org/debian/ wheezy/main libstdc++6 amd64 4.7.2-4 [332 kB] Get:62 http://piatti.debian.org/debian/ wheezy/main zlib1g amd64 1:1.2.7.dfsg-13 [87.4 kB] Get:63 http://piatti.debian.org/debian/ wheezy/main gpgv amd64 1.4.12-6 [226 kB] Get:64 http://piatti.debian.org/debian/ wheezy/main debian-archive-keyring all 2012.4 [30.4 kB] Get:65 http://piatti.debian.org/debian/ wheezy/main readline-common all 6.2-8 [55.3 kB] Get:66 http://piatti.debian.org/debian/ wheezy/main libreadline6 amd64 6.2-8 [166 kB] Get:67 http://piatti.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-20+nmu1 [23.1 kB] Get:68 http://piatti.debian.org/debian/ wheezy/main gnupg amd64 1.4.12-6 [1952 kB] Get:69 http://piatti.debian.org/debian/ wheezy/main libapt-pkg4.12 amd64 0.9.7.6 [890 kB] Get:70 http://piatti.debian.org/debian/ wheezy/main apt amd64 0.9.7.6 [1241 kB] Get:71 http://piatti.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-10 [113 kB] Get:72 http://piatti.debian.org/debian/ wheezy/main libss2 amd64 1.42.5-1 [61.4 kB] Get:73 http://piatti.debian.org/debian/ wheezy/main mawk amd64 1.3.3-17 [90.8 kB] Get:74 http://piatti.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-7.1 [228 kB] Get:75 http://piatti.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20120614-2 [237 kB] Get:76 http://piatti.debian.org/debian/ wheezy/main debconf-i18n all 1.5.46 [236 kB] Get:77 http://piatti.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.7-2 [127 kB] Get:78 http://piatti.debian.org/debian/ wheezy/main hello-debhelper amd64 2.8-1 [69.9 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.9 MB in 0s (38.8 MB/s) (Reading database ... 6205 files and directories currently installed.) Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.7_all.deb) ... Unpacking replacement sensible-utils ... Setting up sensible-utils (0.0.7) ... (Reading database ... 6217 files and directories currently installed.) Preparing to replace debianutils 3.4 (using .../debianutils_4.3.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (4.3.2) ... (Reading database ... 6243 files and directories currently installed.) Preparing to replace libc-bin 2.11.3-4 (using .../libc-bin_2.13-37_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-37) ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 6260 files and directories currently installed.) Preparing to replace libc6 2.11.3-4 (using .../libc6_2.13-37_amd64.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-37) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.7-base. (Reading database ... 6265 files and directories currently installed.) Unpacking gcc-4.7-base (from .../gcc-4.7-base_4.7.2-4_amd64.deb) ... Setting up gcc-4.7-base (4.7.2-4) ... Selecting previously deselected package multiarch-support. (Reading database ... 6272 files and directories currently installed.) Unpacking multiarch-support (from .../multiarch-support_2.13-37_amd64.deb) ... Setting up multiarch-support (2.13-37) ... (Reading database ... 6276 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.7.2-4_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.7.2-4) ... Selecting previously deselected package libsemanage-common. (Reading database ... 6276 files and directories currently installed.) Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ... Setting up libsemanage-common (2.1.6-6) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.4-3_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.1.4-3) ... Selecting previously deselected package libustr-1.0-1. (Reading database ... 6283 files and directories currently installed.) Unpacking libustr-1.0-1 (from .../libustr-1.0-1_1.0.4-3_amd64.deb) ... Setting up libustr-1.0-1 (1.0.4-3) ... (Reading database ... 6294 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-6+squeeze1 (using .../libbz2-1.0_1.0.6-4_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.6-4) ... (Reading database ... 6294 files and directories currently installed.) Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.9-5_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.1.9-5) ... Selecting previously deselected package libsemanage1. (Reading database ... 6294 files and directories currently installed.) Unpacking libsemanage1 (from .../libsemanage1_2.1.6-6_amd64.deb) ... Setting up libsemanage1 (2.1.6-6) ... (Reading database ... 6299 files and directories currently installed.) Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.46_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.46) ... (Reading database ... 6302 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-6.1+squeeze1 (using .../libpam0g_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.3-7.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Selecting previously deselected package libdb5.1. (Reading database ... 6302 files and directories currently installed.) Unpacking libdb5.1 (from .../libdb5.1_5.1.29-5_amd64.deb) ... Setting up libdb5.1 (5.1.29-5) ... Selecting previously deselected package libpam-modules-bin. (Reading database ... 6308 files and directories currently installed.) Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_amd64.deb) ... Replacing files in old package libpam-modules ... Setting up libpam-modules-bin (1.1.3-7.1) ... (Reading database ... 6314 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-6.1+squeeze1 (using .../libpam-modules_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.3-7.1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 6313 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.5.1-1) ... (Reading database ... 6333 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.20.1-5.2_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.20.1-5.2) ... (Reading database ... 6333 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.20.1-5.2_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.20.1-5.2) ... (Reading database ... 6333 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-15_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.4-15) ... Selecting previously deselected package libtinfo5. (Reading database ... 6331 files and directories currently installed.) Unpacking libtinfo5 (from .../libtinfo5_5.9-10_amd64.deb) ... Setting up libtinfo5 (5.9-10) ... (Reading database ... 6340 files and directories currently installed.) Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_4.1+Debian8_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.1+Debian8) ... (Reading database ... 6342 files and directories currently installed.) Preparing to replace tzdata 2012c-0squeeze1 (using .../tzdata_2012g-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012g-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Dec 18 10:46:16 UTC 2012. Universal Time is now: Tue Dec 18 10:46:16 UTC 2012. Run 'dpkg-reconfigure tzdata' if you wish to change it. Selecting previously deselected package liblzma5. (Reading database ... 6342 files and directories currently installed.) Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20120614-2_amd64.deb) ... Setting up liblzma5 (5.1.1alpha+20120614-2) ... (Reading database ... 6351 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../archives/dpkg_1.16.9_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.9) ... (Reading database ... 6362 files and directories currently installed.) Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.20.1-5.2_amd64.deb) ... Removing obsolete conffile /etc/init.d/hwclockfirst.sh ... Unpacking replacement util-linux ... Setting up util-linux (2.20.1-5.2) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 6357 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-5_amd64.deb) ... Unpacking replacement insserv ... Setting up insserv (1.14.0-5) ... Installing new version of config file /etc/insserv.conf ... (Reading database ... 6347 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1+squeeze1 (using .../sysvinit-utils_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-34) ... (Reading database ... 6349 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1+squeeze1 (using .../sysv-rc_2.88dsf-34_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-34) ... Selecting previously unselected package libmount1. (Reading database ... 6350 files and directories currently installed.) Unpacking libmount1 (from .../libmount1_2.20.1-5.2_amd64.deb) ... Setting up libmount1 (2.20.1-5.2) ... (Reading database ... 6356 files and directories currently installed.) Preparing to replace mount 2.17.2-9 (using .../mount_2.20.1-5.2_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.20.1-5.2) ... (Reading database ... 6358 files and directories currently installed.) Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-8_amd64.deb) ... Unpacking replacement libattr1:amd64 ... Setting up libattr1:amd64 (1:2.4.46-8) ... (Reading database ... 6359 files and directories currently installed.) Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-8_amd64.deb) ... Unpacking replacement libacl1:amd64 ... Setting up libacl1:amd64 (2.2.51-8) ... (Reading database ... 6359 files and directories currently installed.) Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3.4_amd64.deb) ... Unpacking replacement coreutils ... Setting up coreutils (8.13-3.4) ... (Reading database ... 6280 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1+squeeze1 (using .../initscripts_2.88dsf-34_amd64.deb) ... Removing unmodified and obsolete conffile /etc/default/bootlogd ... Removing unmodified and obsolete conffile /etc/init.d/mountoverflowtmp ... Upgrading unmodified configuration file /etc/default/rcS ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-34) ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountall-bootclean.sh ... Installing new version of config file /etc/init.d/mountnfs.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/umountroot ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/default/tmpfs ... Installing new version of config file /etc/network/if-up.d/mountnfs ... guest environment detected: Linking /run to /var/run guest environment detected: Linking /run/lock to /var/lock guest environment detected: Linking /dev/shm to /run/shm (Reading database ... 6280 files and directories currently installed.) Preparing to replace base-files 6.0squeeze6 (using .../base-files_6.11_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.11) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating unmodified /etc/profile to current default. (Reading database ... 6283 files and directories currently installed.) Preparing to replace bash 4.1-3 (using .../archives/bash_4.2-4_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.2-4) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 6286 files and directories currently installed.) Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-3_amd64.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3) ... (Reading database ... 6286 files and directories currently installed.) Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-6_amd64.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.2-6) ... (Reading database ... 6287 files and directories currently installed.) Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42.5-1_amd64.deb) ... Unpacking replacement libcomerr2:amd64 ... Setting up libcomerr2:amd64 (1.42.5-1) ... (Reading database ... 6287 files and directories currently installed.) Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fslibs:amd64 ... Setting up e2fslibs:amd64 (1.42.5-1) ... (Reading database ... 6287 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace findutils 4.4.2-1+b1 (using .../findutils_4.4.2-4_amd64.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-4) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace grep 2.6.3-3 (using .../archives/grep_2.12-2_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.12-2) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace gzip 1.3.12-9 (using .../gzip_1.5-1.1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.5-1.1) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace hostname 3.04 (using .../hostname_3.11_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.11) ... (Reading database ... 6282 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.5.1-1) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... (Reading database ... 6297 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-10_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-10) ... (Reading database ... 6299 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Preparing to replace perl-base 5.10.1-17squeeze3 (using .../perl-base_5.14.2-16_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.14.2-16) ... (Reading database ... 6728 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Preparing to replace sed 4.2.1-7 (using .../sed_4.2.1-10_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-10) ... (Reading database ... 6728 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1+squeeze1 (using .../sysvinit_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-34) ... sysvinit: creating /run/initctl Not restarting sysvinit: chroot detected (Reading database ... 6728 files and directories currently installed.) Preparing to replace tar 1.23-3 (using .../archives/tar_1.26-4_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.26-4) ... (Reading database ... 6729 files and directories currently installed.) Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.26_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.26) ... (Reading database ... 6731 files and directories currently installed.) Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.20.1-5.2_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.20.1-5.2) ... (Reading database ... 6731 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-10_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-10) ... Installing new version of config file /etc/terminfo/README ... (Reading database ... 6733 files and directories currently installed.) Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.7.2-4_amd64.deb) ... Unpacking replacement libstdc++6:amd64 ... Setting up libstdc++6:amd64 (4.7.2-4) ... (Reading database ... 6733 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.4.dfsg-3 (using .../zlib1g_1%3a1.2.7.dfsg-13_amd64.deb) ... Unpacking replacement zlib1g:amd64 ... Setting up zlib1g:amd64 (1:1.2.7.dfsg-13) ... (Reading database ... 6733 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4 (using .../gpgv_1.4.12-6_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.12-6) ... (Reading database ... 6733 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28+squeeze1 (using .../debian-archive-keyring_2012.4_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2012.4) ... (Reading database ... 6737 files and directories currently installed.) Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2-8_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2-8) ... (Reading database ... 6737 files and directories currently installed.) Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2-8_amd64.deb) ... Unpacking replacement libreadline6:amd64 ... Setting up libreadline6:amd64 (6.2-8) ... (Reading database ... 6737 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-20+nmu1_amd64.deb) ... Unpacking replacement libusb-0.1-4:amd64 ... Setting up libusb-0.1-4:amd64 (2:0.1.12-20+nmu1) ... (Reading database ... 6736 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4 (using .../gnupg_1.4.12-6_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.12-6) ... Selecting previously unselected package libapt-pkg4.12:amd64. dpkg: considering deconfiguration of apt, which would be broken by installation of libapt-pkg4.12:amd64 ... dpkg: yes, will deconfigure apt (broken by libapt-pkg4.12:amd64) (Reading database ... 6725 files and directories currently installed.) Unpacking libapt-pkg4.12:amd64 (from .../libapt-pkg4.12_0.9.7.6_amd64.deb) ... De-configuring apt ... Setting up libapt-pkg4.12:amd64 (0.9.7.6) ... (Reading database ... 6773 files and directories currently installed.) Preparing to replace apt 0.8.10.3+squeeze1 (using .../archives/apt_0.9.7.6_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.6) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 gpg: checking the trustdb gpg: WARNING: digest algorithm MD5 is deprecated gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information gpg: no ultimately trusted keys found (Reading database ... 6684 files and directories currently installed.) Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-10_amd64.deb) ... Unpacking replacement libncurses5:amd64 ... Setting up libncurses5:amd64 (5.9-10) ... (Reading database ... 6676 files and directories currently installed.) Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42.5-1_amd64.deb) ... Unpacking replacement libss2:amd64 ... Setting up libss2:amd64 (1.42.5-1) ... (Reading database ... 6676 files and directories currently installed.) Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-17_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libpam-runtime 1.1.1-6.1+squeeze1 (using .../libpam-runtime_1.1.3-7.1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7.1) ... (Reading database ... 6677 files and directories currently installed.) Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20120614-2_amd64.deb) ... Unpacking replacement xz-utils ... Setting up xz-utils (5.1.1alpha+20120614-2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode (Reading database ... 6679 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.46_all.deb) ... Unpacking replacement debconf-i18n ... Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.7-2_amd64.deb) ... Unpacking replacement gcc-4.4-base:amd64 ... Preparing to replace hello-debhelper 2.6-2 (using .../hello-debhelper_2.8-1_amd64.deb) ... Unpacking replacement hello-debhelper ... Setting up libtext-charwidth-perl (0.04-7+b1) ... Setting up libtext-iconv-perl (1.7-5) ... Setting up liblocale-gettext-perl (1.05-7+b1) ... Setting up mawk (1.3.3-17) ... Setting up debconf-i18n (1.5.46) ... Setting up gcc-4.4-base:amd64 (4.4.7-2) ... Setting up hello-debhelper (2.8-1) ... 1m25.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-yf', 'dist-upgrade'] 1m25.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'show', 'hello-debhelper'] 1m27.0s DUMP: Package: hello-debhelper Version: 2.8-1 Installed-Size: 551 Maintainer: Santiago Vila Architecture: amd64 Replaces: hello Provides: hello Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info Conflicts: hello Description: The classic greeting, and a good example Homepage: http://www.gnu.org/software/hello/ Description-md5: b5040bf1400ca86808cb22ddf3c17197 Tag: devel::examples, devel::packaging, interface::commandline, suite::debian Section: devel Priority: extra Filename: pool/main/h/hello-debhelper/hello-debhelper_2.8-1_amd64.deb Size: 69944 MD5sum: 05e4a353c2533d345cce7c4ac03b8472 SHA1: eedd48d6db46a042bfb7842e22cc068292ae749e SHA256: 29116a53b8dfc1a863a39ae75ee2578ef0668b618e257aae37184055aebd0c8c 1m27.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'show', 'hello-debhelper'] 1m27.0s INFO: apt-cache knows about the following packages: hello-debhelper 1m27.0s INFO: Running scripts pre_install 1m27.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 1m27.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 1m27.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 1m27.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ wheezy/non-free amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/contrib amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=main origin piatti.debian.org Pinned packages: 1m27.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 1m27.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 1m27.0s DUMP: hello-debhelper: Installed: 2.8-1 Candidate: 2.8-1 Version table: *** 2.8-1 0 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 1m27.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 1m27.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper'] 1m27.5s DUMP: Reading package lists... Building dependency tree... Reading state information... hello-debhelper is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m27.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper'] 1m27.5s INFO: Running scripts post_install 1m27.5s INFO: Running scripts post_distupgrade 1m27.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m27.5s DUMP: FIXING /usr/share/keyrings/debian-archive-removed-keys.gpg~ `/usr/share/keyrings/debian-archive-removed-keys.gpg~' -> `/usr/share/keyrings/debian-archive-removed-keys.gpg' 1m27.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m27.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m27.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m27.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m28.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m28.0s INFO: Running scripts pre_install 1m28.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 1m28.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_install_exceptions'] 1m28.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 1m28.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ wheezy/non-free amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/contrib amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=main origin piatti.debian.org Pinned packages: 1m28.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy'] 1m28.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 1m28.1s DUMP: hello-debhelper: Installed: 2.8-1 Candidate: 2.8-1 Version table: *** 2.8-1 0 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 1m28.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-cache', 'policy', 'hello-debhelper'] 1m28.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper=2.8-1'] 1m28.5s DUMP: Reading package lists... Building dependency tree... Reading state information... hello-debhelper is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m28.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', '-y', 'install', 'hello-debhelper=2.8-1'] 1m28.5s INFO: Running scripts post_install 1m28.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m28.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m28.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--get-selections', '*'] 1m28.8s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs:amd64 install e2fsprogs install findutils install gcc-4.4-base:amd64 install gcc-4.7-base:amd64 install gnupg install gpgv install grep install gzip install hello-debhelper install hostname install initscripts install insserv install libacl1:amd64 install libapt-pkg4.12:amd64 install libattr1:amd64 install libblkid1:amd64 install libbz2-1.0:amd64 install libc-bin install libc6:amd64 install libcomerr2:amd64 install libdb4.8 install libdb5.1:amd64 install libgcc1:amd64 install liblocale-gettext-perl install liblzma2 install liblzma5:amd64 install libmount1 install libncurses5:amd64 install libpam-modules:amd64 install libpam-modules-bin install libpam-runtime install libpam0g:amd64 install libreadline6:amd64 install libselinux1:amd64 install libsemanage-common install libsemanage1:amd64 install libsepol1:amd64 install libslang2:amd64 install libss2:amd64 install libstdc++6:amd64 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtinfo5:amd64 install libusb-0.1-4:amd64 install libustr-1.0-1:amd64 install libuuid1:amd64 install login install lsb-base install mawk install mount install multiarch-support install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g:amd64 install 1m28.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--get-selections', '*'] 1m29.7s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpcNSbEA', '-ac'] 1m30.1s DUMP: debsums: no md5sums for e2fslibs debsums: no md5sums for gcc-4.4-base debsums: no md5sums for gcc-4.7-base debsums: no md5sums for libacl1 debsums: no md5sums for libapt-pkg4.12 debsums: no md5sums for libattr1 debsums: no md5sums for libblkid1 debsums: no md5sums for libbz2-1.0 debsums: no md5sums for libc6 debsums: no md5sums for libcomerr2 debsums: no md5sums for libdb5.1 debsums: no md5sums for libgcc1 debsums: no md5sums for liblzma5 debsums: no md5sums for libncurses5 debsums: no md5sums for libpam-modules debsums: no md5sums for libpam0g debsums: no md5sums for libreadline6 debsums: no md5sums for libselinux1 debsums: no md5sums for libsemanage1 debsums: no md5sums for libsepol1 debsums: no md5sums for libslang2 debsums: no md5sums for libss2 debsums: no md5sums for libstdc++6 debsums: no md5sums for libtinfo5 debsums: no md5sums for libusb-0.1-4 debsums: no md5sums for libustr-1.0-1 debsums: no md5sums for libuuid1 debsums: no md5sums for zlib1g 1m30.1s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpcNSbEA', '-ac'] 1m30.1s INFO: Running scripts pre_remove 1m30.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m30.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m30.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m30.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m30.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_exceptions'] 1m30.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/pre_remove_exceptions'] 1m30.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'remove', 'hello-debhelper'] 1m31.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: hello-debhelper 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 564 kB disk space will be freed. (Reading database ... 6685 files and directories currently installed.) Removing hello-debhelper ... 1m31.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'remove', 'hello-debhelper'] 1m31.1s INFO: Running scripts post_remove 1m31.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_remove_exceptions'] 1m31.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_remove_exceptions'] 1m31.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--purge', 'hello-debhelper'] 1m31.2s DUMP: dpkg: warning: ignoring request to remove hello-debhelper which isn't installed 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--purge', 'hello-debhelper'] 1m31.2s INFO: Running scripts post_purge 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_purge_exceptions'] 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'tmp/scripts/post_purge_exceptions'] 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--purge', '--pending'] 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--purge', '--pending'] 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--remove', '--pending'] 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg', '--remove', '--pending'] 1m31.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m31.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m31.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg-divert', '--list'] 1m31.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m31.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'dpkg-divert', '--list'] 1m31.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'clean'] 1m31.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'apt-get', 'clean'] 1m32.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'umount', '/proc'] 1m32.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpcNSbEA', 'umount', '/proc'] 1m32.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m33.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpcNSbEA'] 1m33.1s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpcNSbEA 1m33.1s INFO: PASS: Upgrading between Debian distributions. 1m33.1s INFO: PASS: All tests. 1m33.1s INFO: piuparts run ends. ret=0 End: 2012-12-18 10:46:31 UTC