Start: 2013-02-25 15:08:53 UTC [squeeze] Package: yagiuda Priority: extra Section: hamradio Installed-Size: 360 Maintainer: Debian QA Group Architecture: amd64 Version: 1.19-7 Depends: libc6 (>= 2.7) Conflicts: psi3 Filename: pool/main/y/yagiuda/yagiuda_1.19-7_amd64.deb Size: 110486 MD5sum: e9bfe2702390860a9c8e2077d48239e6 SHA1: 51b91924591b7e274850a068676ee273be94aeb6 SHA256: 68ea33244ce18858448c019259bf85fd1590f3a9298cb6042551d18abf510a43 Description: software to analyse performance of Yagi-Uda antennas You give the dimensions and positions of each element, and the program calculates gain, input impedance, front-to back ratio, beam-patterns etc. An optimisation program 'optimise' tries to optimise a design. The optimiser can also tell you the sensitivity of a good design, to small mechanical errors. Homepage: http://www.g8wrb.org/yagi/ Tag: field::electronics, hardware::hamradio, implemented-in::c, interface::commandline, role::program [wheezy] Package: yagiuda Version: 1.19-8 Installed-Size: 290 Maintainer: Debian QA Group Architecture: amd64 Depends: libc6 (>= 2.7) Conflicts: psi3 Description: software to analyse performance of Yagi-Uda antennas Homepage: http://www.g8wrb.org/yagi/ Description-md5: 73e9369f3d7490b8ffcb8bae3e248310 Tag: field::electronics, hardware::hamradio, implemented-in::c, interface::commandline, role::program, use::TODO Section: hamradio Priority: extra Filename: pool/main/y/yagiuda/yagiuda_1.19-8_amd64.deb Size: 112228 MD5sum: 1d2640e4a3cf11648d4cc9510f1ada60 SHA1: fa4a7156a9dfe2f891885302ff41a8e36c03e027 SHA256: 50825da9d24218524626f04d8793558dc6ce7b136693d9ea8fd7ca7e76eab9bb Executing: sudo /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-leftovers-after-purge --no-eatmydata -i /etc/shells --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b squeeze.tar.gz -d squeeze -d wheezy --apt yagiuda=1.19-8 Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.50~201301211214~0.49-10-ga8654cc starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-leftovers-after-purge' '--no-eatmydata' '-i' '/etc/shells' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' 'squeeze.tar.gz' '-d' 'squeeze' '-d' 'wheezy' '--apt' 'yagiuda=1.19-8' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Fri Feb 15 15:39:52 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpklL5j3 0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpklL5j3 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpklL5j3', '-zxf', 'squeeze.tar.gz'] 0m12.3s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpklL5j3', '-zxf', 'squeeze.tar.gz'] 0m12.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'mount', '-t', 'proc', 'proc', '/proc'] 0m12.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'mount', '-t', 'proc', 'proc', '/proc'] 0m12.3s DEBUG: Created policy-rc.d and chmodded it. 0m12.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'update'] 0m20.2s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672 B] Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en Ign http://piatti.debian.org/debian/ squeeze/main Translation-en Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en Get:2 http://piatti.debian.org squeeze Release [99.8 kB] Get:3 http://piatti.debian.org squeeze/main amd64 Packages [8602 kB] Get:4 http://piatti.debian.org squeeze/contrib amd64 Packages [64.1 kB] Get:5 http://piatti.debian.org squeeze/non-free amd64 Packages [124 kB] Fetched 8892 kB in 1s (7548 kB/s) Reading package lists... 0m20.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'update'] 0m20.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', '-yf', 'dist-upgrade'] 0m23.2s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv gzip perl-base tzdata 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 4247 kB of archives. After this operation, 504 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze7 [68.8 kB] Get:2 http://piatti.debian.org/debian/ squeeze/main gzip amd64 1.3.12-9+squeeze1 [108 kB] Get:3 http://piatti.debian.org/debian/ squeeze/main perl-base amd64 5.10.1-17squeeze5 [1059 kB] Get:4 http://piatti.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze1 [222 kB] Get:5 http://piatti.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze1 [2148 kB] Get:6 http://piatti.debian.org/debian/ squeeze/main tzdata all 2012g-0squeeze1 [642 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 4247 kB in 0s (45.4 MB/s) (Reading database ... 6146 files and directories currently installed.) Preparing to replace base-files 6.0squeeze6 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gzip 1.3.12-9 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace perl-base 5.10.1-17squeeze3 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze5) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace tzdata 2012c-0squeeze1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 25 15:09:17 UTC 2013. Universal Time is now: Mon Feb 25 15:09:17 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m23.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', '-yf', 'dist-upgrade'] 0m23.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpklL5j3/tmp/scripts/ 0m23.2s INFO: Running scripts post_setup 0m23.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_setup_forbid_home'] 0m23.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_setup_forbid_home'] 0m23.2s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpklL5j3 to wheezy 0m23.2s INFO: Running scripts pre_distupgrade 0m23.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m23.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m23.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'update'] 0m27.8s DUMP: Get:1 http://piatti.debian.org wheezy Release.gpg [836 B] Ign http://piatti.debian.org/debian/ wheezy/contrib Translation-en Ign http://piatti.debian.org/debian/ wheezy/main Translation-en Ign http://piatti.debian.org/debian/ wheezy/non-free Translation-en Get:2 http://piatti.debian.org wheezy Release [223 kB] Get:3 http://piatti.debian.org wheezy/main amd64 Packages [7790 kB] Get:4 http://piatti.debian.org wheezy/contrib amd64 Packages [52.9 kB] Get:5 http://piatti.debian.org wheezy/non-free amd64 Packages [102 kB] Fetched 8169 kB in 1s (7641 kB/s) Reading package lists... 0m27.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'update'] 0m27.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', '-yf', 'dist-upgrade'] 0m55.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: gcc-4.7-base libapt-pkg4.12 libdb5.1 liblzma5 libmount1 libpam-modules-bin libsemanage-common libsemanage1 libtinfo5 libustr-1.0-1 multiarch-support The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.4-base gnupg gpgv grep gzip hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libusb-0.1-4 libuuid1 login lsb-base mawk mount ncurses-base ncurses-bin passwd perl-base readline-common sed sensible-utils sysv-rc sysvinit sysvinit-utils tar tzdata util-linux xz-utils zlib1g 66 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8 MB of archives. After this operation, 2921 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ wheezy/main sensible-utils all 0.0.7 [8850 B] Get:2 http://piatti.debian.org/debian/ wheezy/main debianutils amd64 4.3.2 [78.9 kB] Get:3 http://piatti.debian.org/debian/ wheezy/main libc-bin amd64 2.13-38 [1269 kB] Get:4 http://piatti.debian.org/debian/ wheezy/main libc6 amd64 2.13-38 [4339 kB] Get:5 http://piatti.debian.org/debian/ wheezy/main gcc-4.7-base amd64 4.7.2-5 [144 kB] Get:6 http://piatti.debian.org/debian/ wheezy/main multiarch-support amd64 2.13-38 [150 kB] Get:7 http://piatti.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.7.2-5 [43.1 kB] Get:8 http://piatti.debian.org/debian/ wheezy/main libsemanage-common all 2.1.6-6 [23.2 kB] Get:9 http://piatti.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.4-3 [135 kB] Get:10 http://piatti.debian.org/debian/ wheezy/main libustr-1.0-1 amd64 1.0.4-3 [92.5 kB] Get:11 http://piatti.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-4 [46.5 kB] Get:12 http://piatti.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.9-5 [90.6 kB] Get:13 http://piatti.debian.org/debian/ wheezy/main libsemanage1 amd64 2.1.6-6 [102 kB] Get:14 http://piatti.debian.org/debian/ wheezy/main debconf all 1.5.49 [171 kB] Get:15 http://piatti.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-7.1 [128 kB] Get:16 http://piatti.debian.org/debian/ wheezy/main libdb5.1 amd64 5.1.29-5 [723 kB] Get:17 http://piatti.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-7.1 [113 kB] Get:18 http://piatti.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-7.1 [348 kB] Get:19 http://piatti.debian.org/debian/ wheezy/main passwd amd64 1:4.1.5.1-1 [1259 kB] Get:20 http://piatti.debian.org/debian/ wheezy/main libuuid1 amd64 2.20.1-5.3 [57.1 kB] Get:21 http://piatti.debian.org/debian/ wheezy/main libblkid1 amd64 2.20.1-5.3 [120 kB] Get:22 http://piatti.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-15 [551 kB] Get:23 http://piatti.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-10 [275 kB] Get:24 http://piatti.debian.org/debian/ wheezy/main lsb-base all 4.1+Debian8 [26.3 kB] Get:25 http://piatti.debian.org/debian/ wheezy/main tzdata all 2012j-1 [500 kB] Get:26 http://piatti.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20120614-2 [202 kB] Get:27 http://piatti.debian.org/debian/ wheezy/main dpkg amd64 1.16.9 [2561 kB] Get:28 http://piatti.debian.org/debian/ wheezy/main util-linux amd64 2.20.1-5.3 [659 kB] Get:29 http://piatti.debian.org/debian/ wheezy/main insserv amd64 1.14.0-5 [64.8 kB] Get:30 http://piatti.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-34 [101 kB] Get:31 http://piatti.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-34 [80.2 kB] Get:32 http://piatti.debian.org/debian/ wheezy/main libmount1 amd64 2.20.1-5.3 [120 kB] Get:33 http://piatti.debian.org/debian/ wheezy/main mount amd64 2.20.1-5.3 [213 kB] Get:34 http://piatti.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-8 [19.8 kB] Get:35 http://piatti.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-8 [30.1 kB] Get:36 http://piatti.debian.org/debian/ wheezy/main coreutils amd64 8.13-3.5 [5628 kB] Get:37 http://piatti.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-34 [92.3 kB] Get:38 http://piatti.debian.org/debian/ wheezy/main base-files amd64 7.1 [71.8 kB] Get:39 http://piatti.debian.org/debian/ wheezy/main bash amd64 4.2+dfsg-0.1 [1496 kB] Get:40 http://piatti.debian.org/debian/ wheezy/main dash amd64 0.5.7-3 [113 kB] Get:41 http://piatti.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-6 [366 kB] Get:42 http://piatti.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42.5-1 [56.1 kB] Get:43 http://piatti.debian.org/debian/ wheezy/main e2fslibs amd64 1.42.5-1 [197 kB] Get:44 http://piatti.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42.5-1 [979 kB] Get:45 http://piatti.debian.org/debian/ wheezy/main findutils amd64 4.4.2-4 [694 kB] Get:46 http://piatti.debian.org/debian/ wheezy/main grep amd64 2.12-2 [454 kB] Get:47 http://piatti.debian.org/debian/ wheezy/main gzip amd64 1.5-1.1 [119 kB] Get:48 http://piatti.debian.org/debian/ wheezy/main hostname amd64 3.11 [15.0 kB] Get:49 http://piatti.debian.org/debian/ wheezy/main login amd64 1:4.1.5.1-1 [983 kB] Get:50 http://piatti.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-10 [335 kB] Get:51 http://piatti.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB] Get:52 http://piatti.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB] Get:53 http://piatti.debian.org/debian/ wheezy/main perl-base amd64 5.14.2-18 [1537 kB] Get:54 http://piatti.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB] Get:55 http://piatti.debian.org/debian/ wheezy/main sed amd64 4.2.1-10 [251 kB] Get:56 http://piatti.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-34 [133 kB] Get:57 http://piatti.debian.org/debian/ wheezy/main tar amd64 1.26+dfsg-0.1 [985 kB] Get:58 http://piatti.debian.org/debian/ wheezy/main base-passwd amd64 3.5.26 [46.3 kB] Get:59 http://piatti.debian.org/debian/ wheezy/main bsdutils amd64 1:2.20.1-5.3 [85.5 kB] Get:60 http://piatti.debian.org/debian/ wheezy/main ncurses-base all 5.9-10 [198 kB] Get:61 http://piatti.debian.org/debian/ wheezy/main libstdc++6 amd64 4.7.2-5 [332 kB] Get:62 http://piatti.debian.org/debian/ wheezy/main zlib1g amd64 1:1.2.7.dfsg-13 [87.4 kB] Get:63 http://piatti.debian.org/debian/ wheezy/main gpgv amd64 1.4.12-7 [226 kB] Get:64 http://piatti.debian.org/debian/ wheezy/main debian-archive-keyring all 2012.4 [30.4 kB] Get:65 http://piatti.debian.org/debian/ wheezy/main readline-common all 6.2+dfsg-0.1 [31.9 kB] Get:66 http://piatti.debian.org/debian/ wheezy/main libreadline6 amd64 6.2+dfsg-0.1 [166 kB] Get:67 http://piatti.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-20+nmu1 [23.1 kB] Get:68 http://piatti.debian.org/debian/ wheezy/main gnupg amd64 1.4.12-7 [1952 kB] Get:69 http://piatti.debian.org/debian/ wheezy/main libapt-pkg4.12 amd64 0.9.7.7 [896 kB] Get:70 http://piatti.debian.org/debian/ wheezy/main apt amd64 0.9.7.7 [1253 kB] Get:71 http://piatti.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-10 [113 kB] Get:72 http://piatti.debian.org/debian/ wheezy/main libss2 amd64 1.42.5-1 [61.4 kB] Get:73 http://piatti.debian.org/debian/ wheezy/main mawk amd64 1.3.3-17 [90.8 kB] Get:74 http://piatti.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-7.1 [228 kB] Get:75 http://piatti.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20120614-2 [237 kB] Get:76 http://piatti.debian.org/debian/ wheezy/main debconf-i18n all 1.5.49 [237 kB] Get:77 http://piatti.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.7-2 [127 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.8 MB in 0s (45.8 MB/s) (Reading database ... 6146 files and directories currently installed.) Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.7_all.deb) ... Unpacking replacement sensible-utils ... Setting up sensible-utils (0.0.7) ... (Reading database ... 6158 files and directories currently installed.) Preparing to replace debianutils 3.4 (using .../debianutils_4.3.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (4.3.2) ... (Reading database ... 6184 files and directories currently installed.) Preparing to replace libc-bin 2.11.3-4 (using .../libc-bin_2.13-38_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-38) ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 6201 files and directories currently installed.) Preparing to replace libc6 2.11.3-4 (using .../libc6_2.13-38_amd64.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-38) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.7-base. (Reading database ... 6206 files and directories currently installed.) Unpacking gcc-4.7-base (from .../gcc-4.7-base_4.7.2-5_amd64.deb) ... Setting up gcc-4.7-base (4.7.2-5) ... Selecting previously deselected package multiarch-support. (Reading database ... 6213 files and directories currently installed.) Unpacking multiarch-support (from .../multiarch-support_2.13-38_amd64.deb) ... Setting up multiarch-support (2.13-38) ... (Reading database ... 6217 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.7.2-5_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.7.2-5) ... Selecting previously deselected package libsemanage-common. (Reading database ... 6217 files and directories currently installed.) Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ... Setting up libsemanage-common (2.1.6-6) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.4-3_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.1.4-3) ... Selecting previously deselected package libustr-1.0-1. (Reading database ... 6224 files and directories currently installed.) Unpacking libustr-1.0-1 (from .../libustr-1.0-1_1.0.4-3_amd64.deb) ... Setting up libustr-1.0-1 (1.0.4-3) ... (Reading database ... 6235 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-6+squeeze1 (using .../libbz2-1.0_1.0.6-4_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.6-4) ... (Reading database ... 6235 files and directories currently installed.) Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.9-5_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.1.9-5) ... Selecting previously deselected package libsemanage1. (Reading database ... 6235 files and directories currently installed.) Unpacking libsemanage1 (from .../libsemanage1_2.1.6-6_amd64.deb) ... Setting up libsemanage1 (2.1.6-6) ... (Reading database ... 6240 files and directories currently installed.) Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.49_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.49) ... (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-6.1+squeeze1 (using .../libpam0g_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.3-7.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Selecting previously deselected package libdb5.1. (Reading database ... 6243 files and directories currently installed.) Unpacking libdb5.1 (from .../libdb5.1_5.1.29-5_amd64.deb) ... Setting up libdb5.1 (5.1.29-5) ... Selecting previously deselected package libpam-modules-bin. (Reading database ... 6249 files and directories currently installed.) Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_amd64.deb) ... Replacing files in old package libpam-modules ... Setting up libpam-modules-bin (1.1.3-7.1) ... (Reading database ... 6255 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-6.1+squeeze1 (using .../libpam-modules_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.3-7.1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 6254 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.5.1-1) ... (Reading database ... 6274 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.20.1-5.3) ... (Reading database ... 6275 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.20.1-5.3) ... (Reading database ... 6275 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-15_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.4-15) ... Selecting previously deselected package libtinfo5. (Reading database ... 6273 files and directories currently installed.) Unpacking libtinfo5 (from .../libtinfo5_5.9-10_amd64.deb) ... Setting up libtinfo5 (5.9-10) ... (Reading database ... 6282 files and directories currently installed.) Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_4.1+Debian8_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.1+Debian8) ... (Reading database ... 6284 files and directories currently installed.) Preparing to replace tzdata 2012g-0squeeze1 (using .../tzdata_2012j-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012j-1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 25 15:09:41 UTC 2013. Universal Time is now: Mon Feb 25 15:09:41 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Selecting previously deselected package liblzma5. (Reading database ... 6284 files and directories currently installed.) Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20120614-2_amd64.deb) ... Setting up liblzma5 (5.1.1alpha+20120614-2) ... (Reading database ... 6293 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../archives/dpkg_1.16.9_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.9) ... (Reading database ... 6304 files and directories currently installed.) Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.20.1-5.3_amd64.deb) ... Removing obsolete conffile /etc/init.d/hwclockfirst.sh ... Unpacking replacement util-linux ... Setting up util-linux (2.20.1-5.3) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 6299 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-5_amd64.deb) ... Unpacking replacement insserv ... Setting up insserv (1.14.0-5) ... Installing new version of config file /etc/insserv.conf ... (Reading database ... 6289 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1+squeeze1 (using .../sysvinit-utils_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-34) ... (Reading database ... 6291 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1+squeeze1 (using .../sysv-rc_2.88dsf-34_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-34) ... Selecting previously unselected package libmount1. (Reading database ... 6292 files and directories currently installed.) Unpacking libmount1 (from .../libmount1_2.20.1-5.3_amd64.deb) ... Setting up libmount1 (2.20.1-5.3) ... (Reading database ... 6298 files and directories currently installed.) Preparing to replace mount 2.17.2-9 (using .../mount_2.20.1-5.3_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.20.1-5.3) ... (Reading database ... 6300 files and directories currently installed.) Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-8_amd64.deb) ... Unpacking replacement libattr1:amd64 ... Setting up libattr1:amd64 (1:2.4.46-8) ... (Reading database ... 6301 files and directories currently installed.) Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-8_amd64.deb) ... Unpacking replacement libacl1:amd64 ... Setting up libacl1:amd64 (2.2.51-8) ... (Reading database ... 6301 files and directories currently installed.) Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3.5_amd64.deb) ... Unpacking replacement coreutils ... Setting up coreutils (8.13-3.5) ... (Reading database ... 6222 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1+squeeze1 (using .../initscripts_2.88dsf-34_amd64.deb) ... Removing unmodified and obsolete conffile /etc/default/bootlogd ... Removing unmodified and obsolete conffile /etc/init.d/mountoverflowtmp ... Upgrading unmodified configuration file /etc/default/rcS ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-34) ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountall-bootclean.sh ... Installing new version of config file /etc/init.d/mountnfs.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/umountroot ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/default/tmpfs ... Installing new version of config file /etc/network/if-up.d/mountnfs ... guest environment detected: Linking /run to /var/run guest environment detected: Linking /run/lock to /var/lock guest environment detected: Linking /dev/shm to /run/shm (Reading database ... 6222 files and directories currently installed.) Preparing to replace base-files 6.0squeeze7 (using .../base-files_7.1_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (7.1) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating /etc/profile to current default. (Reading database ... 6225 files and directories currently installed.) Preparing to replace bash 4.1-3 (using .../bash_4.2+dfsg-0.1_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.2+dfsg-0.1) ... Installing new version of config file /etc/skel/.bashrc ... Installing new version of config file /etc/bash.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 6228 files and directories currently installed.) Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-3_amd64.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3) ... (Reading database ... 6228 files and directories currently installed.) Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-6_amd64.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.2-6) ... (Reading database ... 6229 files and directories currently installed.) Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42.5-1_amd64.deb) ... Unpacking replacement libcomerr2:amd64 ... Setting up libcomerr2:amd64 (1.42.5-1) ... (Reading database ... 6229 files and directories currently installed.) Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fslibs:amd64 ... Setting up e2fslibs:amd64 (1.42.5-1) ... (Reading database ... 6229 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... 6225 files and directories currently installed.) Preparing to replace findutils 4.4.2-1+b1 (using .../findutils_4.4.2-4_amd64.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-4) ... (Reading database ... 6225 files and directories currently installed.) Preparing to replace grep 2.6.3-3 (using .../archives/grep_2.12-2_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.12-2) ... (Reading database ... 6225 files and directories currently installed.) Preparing to replace gzip 1.3.12-9+squeeze1 (using .../gzip_1.5-1.1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.5-1.1) ... (Reading database ... 6225 files and directories currently installed.) Preparing to replace hostname 3.04 (using .../hostname_3.11_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.11) ... (Reading database ... 6224 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.5.1-1) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... (Reading database ... 6239 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-10_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-10) ... (Reading database ... 6241 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Preparing to replace perl-base 5.10.1-17squeeze5 (using .../perl-base_5.14.2-18_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.14.2-18) ... (Reading database ... 6670 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Preparing to replace sed 4.2.1-7 (using .../sed_4.2.1-10_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-10) ... (Reading database ... 6670 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1+squeeze1 (using .../sysvinit_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-34) ... sysvinit: creating /run/initctl Not restarting sysvinit: chroot detected (Reading database ... 6670 files and directories currently installed.) Preparing to replace tar 1.23-3 (using .../tar_1.26+dfsg-0.1_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.26+dfsg-0.1) ... (Reading database ... 6671 files and directories currently installed.) Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.26_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.26) ... (Reading database ... 6673 files and directories currently installed.) Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.20.1-5.3_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.20.1-5.3) ... (Reading database ... 6673 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-10_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-10) ... Installing new version of config file /etc/terminfo/README ... (Reading database ... 6675 files and directories currently installed.) Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.7.2-5_amd64.deb) ... Unpacking replacement libstdc++6:amd64 ... Setting up libstdc++6:amd64 (4.7.2-5) ... (Reading database ... 6675 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.4.dfsg-3 (using .../zlib1g_1%3a1.2.7.dfsg-13_amd64.deb) ... Unpacking replacement zlib1g:amd64 ... Setting up zlib1g:amd64 (1:1.2.7.dfsg-13) ... (Reading database ... 6675 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze1 (using .../gpgv_1.4.12-7_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.12-7) ... (Reading database ... 6675 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28+squeeze1 (using .../debian-archive-keyring_2012.4_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2012.4) ... (Reading database ... 6679 files and directories currently installed.) Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2+dfsg-0.1_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2+dfsg-0.1) ... (Reading database ... 6678 files and directories currently installed.) Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2+dfsg-0.1_amd64.deb) ... Unpacking replacement libreadline6:amd64 ... Setting up libreadline6:amd64 (6.2+dfsg-0.1) ... (Reading database ... 6678 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-20+nmu1_amd64.deb) ... Unpacking replacement libusb-0.1-4:amd64 ... Setting up libusb-0.1-4:amd64 (2:0.1.12-20+nmu1) ... (Reading database ... 6677 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze1 (using .../gnupg_1.4.12-7_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.12-7) ... Selecting previously unselected package libapt-pkg4.12:amd64. dpkg: considering deconfiguration of apt, which would be broken by installation of libapt-pkg4.12:amd64 ... dpkg: yes, will deconfigure apt (broken by libapt-pkg4.12:amd64) (Reading database ... 6666 files and directories currently installed.) Unpacking libapt-pkg4.12:amd64 (from .../libapt-pkg4.12_0.9.7.7_amd64.deb) ... De-configuring apt ... Setting up libapt-pkg4.12:amd64 (0.9.7.7) ... (Reading database ... 6714 files and directories currently installed.) Preparing to replace apt 0.8.10.3+squeeze1 (using .../archives/apt_0.9.7.7_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.7) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 gpg: checking the trustdb gpg: WARNING: digest algorithm MD5 is deprecated gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information gpg: no ultimately trusted keys found (Reading database ... 6625 files and directories currently installed.) Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-10_amd64.deb) ... Unpacking replacement libncurses5:amd64 ... Setting up libncurses5:amd64 (5.9-10) ... (Reading database ... 6617 files and directories currently installed.) Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42.5-1_amd64.deb) ... Unpacking replacement libss2:amd64 ... Setting up libss2:amd64 (1.42.5-1) ... (Reading database ... 6617 files and directories currently installed.) Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-17_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libpam-runtime 1.1.1-6.1+squeeze1 (using .../libpam-runtime_1.1.3-7.1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7.1) ... (Reading database ... 6618 files and directories currently installed.) Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20120614-2_amd64.deb) ... Unpacking replacement xz-utils ... Setting up xz-utils (5.1.1alpha+20120614-2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode (Reading database ... 6620 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.49_all.deb) ... Unpacking replacement debconf-i18n ... Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.7-2_amd64.deb) ... Unpacking replacement gcc-4.4-base:amd64 ... Setting up libtext-charwidth-perl (0.04-7+b1) ... Setting up libtext-iconv-perl (1.7-5) ... Setting up liblocale-gettext-perl (1.05-7+b1) ... Setting up mawk (1.3.3-17) ... Setting up debconf-i18n (1.5.49) ... Setting up gcc-4.4-base:amd64 (4.4.7-2) ... 0m55.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', '-yf', 'dist-upgrade'] 0m55.6s INFO: Running scripts post_distupgrade 0m55.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_distupgrade_exceptions'] 0m55.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_distupgrade_exceptions'] 0m55.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m55.6s DUMP: FIXING /usr/share/keyrings/debian-archive-removed-keys.gpg~ `/usr/share/keyrings/debian-archive-removed-keys.gpg~' -> `/usr/share/keyrings/debian-archive-removed-keys.gpg' 0m55.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m55.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m55.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m55.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m56.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m56.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'clean'] 0m56.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'apt-get', 'clean'] 0m56.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'dpkg', '--get-selections', '*'] 0m56.9s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs:amd64 install e2fsprogs install findutils install gcc-4.4-base:amd64 install gcc-4.7-base:amd64 install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1:amd64 install libapt-pkg4.12:amd64 install libattr1:amd64 install libblkid1:amd64 install libbz2-1.0:amd64 install libc-bin install libc6:amd64 install libcomerr2:amd64 install libdb4.8 install libdb5.1:amd64 install libgcc1:amd64 install liblocale-gettext-perl install liblzma2 install liblzma5:amd64 install libmount1 install libncurses5:amd64 install libpam-modules:amd64 install libpam-modules-bin install libpam-runtime install libpam0g:amd64 install libreadline6:amd64 install libselinux1:amd64 install libsemanage-common install libsemanage1:amd64 install libsepol1:amd64 install libslang2:amd64 install libss2:amd64 install libstdc++6:amd64 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtinfo5:amd64 install libusb-0.1-4:amd64 install libustr-1.0-1:amd64 install libuuid1:amd64 install login install lsb-base install mawk install mount install multiarch-support install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g:amd64 install 0m56.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'dpkg', '--get-selections', '*'] 0m56.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'dpkg-divert', '--list'] 0m56.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m56.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'dpkg-divert', '--list'] 0m57.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'umount', '/proc'] 0m57.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpklL5j3', 'umount', '/proc'] 0m57.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m57.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpklL5j3'] 0m57.4s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpklL5j3 0m57.4s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m57.4s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpWyQ3m7 0m57.4s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpWyQ3m7 0m57.4s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', '-zxf', 'squeeze.tar.gz'] 1m9.1s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', '-zxf', 'squeeze.tar.gz'] 1m9.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'mount', '-t', 'proc', 'proc', '/proc'] 1m9.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'mount', '-t', 'proc', 'proc', '/proc'] 1m9.2s DEBUG: Created policy-rc.d and chmodded it. 1m9.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'update'] 1m17.0s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672 B] Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en Ign http://piatti.debian.org/debian/ squeeze/main Translation-en Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en Get:2 http://piatti.debian.org squeeze Release [99.8 kB] Get:3 http://piatti.debian.org squeeze/main amd64 Packages [8602 kB] Get:4 http://piatti.debian.org squeeze/contrib amd64 Packages [64.1 kB] Get:5 http://piatti.debian.org squeeze/non-free amd64 Packages [124 kB] Fetched 8892 kB in 1s (7481 kB/s) Reading package lists... 1m17.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'update'] 1m17.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-yf', 'dist-upgrade'] 1m19.5s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv gzip perl-base tzdata 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 4247 kB of archives. After this operation, 504 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze7 [68.8 kB] Get:2 http://piatti.debian.org/debian/ squeeze/main gzip amd64 1.3.12-9+squeeze1 [108 kB] Get:3 http://piatti.debian.org/debian/ squeeze/main perl-base amd64 5.10.1-17squeeze5 [1059 kB] Get:4 http://piatti.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze1 [222 kB] Get:5 http://piatti.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze1 [2148 kB] Get:6 http://piatti.debian.org/debian/ squeeze/main tzdata all 2012g-0squeeze1 [642 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 4247 kB in 0s (45.5 MB/s) (Reading database ... 6146 files and directories currently installed.) Preparing to replace base-files 6.0squeeze6 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gzip 1.3.12-9 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace perl-base 5.10.1-17squeeze3 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze5) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze1) ... (Reading database ... 6146 files and directories currently installed.) Preparing to replace tzdata 2012c-0squeeze1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 25 15:10:13 UTC 2013. Universal Time is now: Mon Feb 25 15:10:13 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. 1m19.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-yf', 'dist-upgrade'] 1m19.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpWyQ3m7/tmp/scripts/ 1m19.5s INFO: Running scripts post_setup 1m19.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_setup_forbid_home'] 1m19.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_setup_forbid_home'] 1m19.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 1m19.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 1m19.8s INFO: Running scripts pre_test 1m19.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_test_root_password'] 1m19.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m19.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_test_root_password'] 1m19.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'show', 'yagiuda'] 1m20.4s DUMP: Package: yagiuda Priority: extra Section: hamradio Installed-Size: 360 Maintainer: Debian QA Group Architecture: amd64 Version: 1.19-7 Depends: libc6 (>= 2.7) Conflicts: psi3 Filename: pool/main/y/yagiuda/yagiuda_1.19-7_amd64.deb Size: 110486 MD5sum: e9bfe2702390860a9c8e2077d48239e6 SHA1: 51b91924591b7e274850a068676ee273be94aeb6 SHA256: 68ea33244ce18858448c019259bf85fd1590f3a9298cb6042551d18abf510a43 Description: software to analyse performance of Yagi-Uda antennas You give the dimensions and positions of each element, and the program calculates gain, input impedance, front-to back ratio, beam-patterns etc. An optimisation program 'optimise' tries to optimise a design. The optimiser can also tell you the sensitivity of a good design, to small mechanical errors. Homepage: http://www.g8wrb.org/yagi/ Tag: field::electronics, hardware::hamradio, implemented-in::c, interface::commandline, role::program 1m20.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'show', 'yagiuda'] 1m20.4s INFO: apt-cache knows about the following packages: yagiuda 1m20.4s INFO: Running scripts pre_install 1m20.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 1m20.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 1m20.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m20.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m20.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 1m20.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=main origin piatti.debian.org Pinned packages: 1m20.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 1m20.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 1m20.4s DUMP: yagiuda: Installed: (none) Candidate: 1.19-7 Version table: 1.19-7 0 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages 1m20.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 1m20.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda'] 1m21.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: yagiuda 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 110 kB of archives. After this operation, 369 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ squeeze/main yagiuda amd64 1.19-7 [110 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 110 kB in 0s (280 kB/s) Selecting previously deselected package yagiuda. (Reading database ... 6146 files and directories currently installed.) Unpacking yagiuda (from .../yagiuda_1.19-7_amd64.deb) ... Setting up yagiuda (1.19-7) ... 1m21.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda'] 1m21.4s INFO: Running scripts post_install 1m21.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 1m21.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 1m21.6s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpWyQ3m7 to wheezy 1m21.6s INFO: Running scripts pre_distupgrade 1m21.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m21.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m21.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'update'] 1m25.0s DUMP: Get:1 http://piatti.debian.org wheezy Release.gpg [836 B] Ign http://piatti.debian.org/debian/ wheezy/contrib Translation-en Ign http://piatti.debian.org/debian/ wheezy/main Translation-en Ign http://piatti.debian.org/debian/ wheezy/non-free Translation-en Get:2 http://piatti.debian.org wheezy Release [223 kB] Get:3 http://piatti.debian.org wheezy/main amd64 Packages [7790 kB] Get:4 http://piatti.debian.org wheezy/contrib amd64 Packages [52.9 kB] Get:5 http://piatti.debian.org wheezy/non-free amd64 Packages [102 kB] Fetched 8169 kB in 1s (7662 kB/s) Reading package lists... 1m25.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'update'] 1m25.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-yf', 'dist-upgrade'] 1m57.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: gcc-4.7-base libapt-pkg4.12 libdb5.1 liblzma5 libmount1 libpam-modules-bin libsemanage-common libsemanage1 libtinfo5 libustr-1.0-1 multiarch-support The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.4-base gnupg gpgv grep gzip hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libusb-0.1-4 libuuid1 login lsb-base mawk mount ncurses-base ncurses-bin passwd perl-base readline-common sed sensible-utils sysv-rc sysvinit sysvinit-utils tar tzdata util-linux xz-utils yagiuda zlib1g 67 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 35.9 MB of archives. After this operation, 2993 kB disk space will be freed. Get:1 http://piatti.debian.org/debian/ wheezy/main sensible-utils all 0.0.7 [8850 B] Get:2 http://piatti.debian.org/debian/ wheezy/main debianutils amd64 4.3.2 [78.9 kB] Get:3 http://piatti.debian.org/debian/ wheezy/main libc-bin amd64 2.13-38 [1269 kB] Get:4 http://piatti.debian.org/debian/ wheezy/main libc6 amd64 2.13-38 [4339 kB] Get:5 http://piatti.debian.org/debian/ wheezy/main gcc-4.7-base amd64 4.7.2-5 [144 kB] Get:6 http://piatti.debian.org/debian/ wheezy/main multiarch-support amd64 2.13-38 [150 kB] Get:7 http://piatti.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.7.2-5 [43.1 kB] Get:8 http://piatti.debian.org/debian/ wheezy/main libsemanage-common all 2.1.6-6 [23.2 kB] Get:9 http://piatti.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.4-3 [135 kB] Get:10 http://piatti.debian.org/debian/ wheezy/main libustr-1.0-1 amd64 1.0.4-3 [92.5 kB] Get:11 http://piatti.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-4 [46.5 kB] Get:12 http://piatti.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.9-5 [90.6 kB] Get:13 http://piatti.debian.org/debian/ wheezy/main libsemanage1 amd64 2.1.6-6 [102 kB] Get:14 http://piatti.debian.org/debian/ wheezy/main debconf all 1.5.49 [171 kB] Get:15 http://piatti.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-7.1 [128 kB] Get:16 http://piatti.debian.org/debian/ wheezy/main libdb5.1 amd64 5.1.29-5 [723 kB] Get:17 http://piatti.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-7.1 [113 kB] Get:18 http://piatti.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-7.1 [348 kB] Get:19 http://piatti.debian.org/debian/ wheezy/main passwd amd64 1:4.1.5.1-1 [1259 kB] Get:20 http://piatti.debian.org/debian/ wheezy/main libuuid1 amd64 2.20.1-5.3 [57.1 kB] Get:21 http://piatti.debian.org/debian/ wheezy/main libblkid1 amd64 2.20.1-5.3 [120 kB] Get:22 http://piatti.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-15 [551 kB] Get:23 http://piatti.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-10 [275 kB] Get:24 http://piatti.debian.org/debian/ wheezy/main lsb-base all 4.1+Debian8 [26.3 kB] Get:25 http://piatti.debian.org/debian/ wheezy/main tzdata all 2012j-1 [500 kB] Get:26 http://piatti.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20120614-2 [202 kB] Get:27 http://piatti.debian.org/debian/ wheezy/main dpkg amd64 1.16.9 [2561 kB] Get:28 http://piatti.debian.org/debian/ wheezy/main util-linux amd64 2.20.1-5.3 [659 kB] Get:29 http://piatti.debian.org/debian/ wheezy/main insserv amd64 1.14.0-5 [64.8 kB] Get:30 http://piatti.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-34 [101 kB] Get:31 http://piatti.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-34 [80.2 kB] Get:32 http://piatti.debian.org/debian/ wheezy/main libmount1 amd64 2.20.1-5.3 [120 kB] Get:33 http://piatti.debian.org/debian/ wheezy/main mount amd64 2.20.1-5.3 [213 kB] Get:34 http://piatti.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-8 [19.8 kB] Get:35 http://piatti.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-8 [30.1 kB] Get:36 http://piatti.debian.org/debian/ wheezy/main coreutils amd64 8.13-3.5 [5628 kB] Get:37 http://piatti.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-34 [92.3 kB] Get:38 http://piatti.debian.org/debian/ wheezy/main base-files amd64 7.1 [71.8 kB] Get:39 http://piatti.debian.org/debian/ wheezy/main bash amd64 4.2+dfsg-0.1 [1496 kB] Get:40 http://piatti.debian.org/debian/ wheezy/main dash amd64 0.5.7-3 [113 kB] Get:41 http://piatti.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-6 [366 kB] Get:42 http://piatti.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42.5-1 [56.1 kB] Get:43 http://piatti.debian.org/debian/ wheezy/main e2fslibs amd64 1.42.5-1 [197 kB] Get:44 http://piatti.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42.5-1 [979 kB] Get:45 http://piatti.debian.org/debian/ wheezy/main findutils amd64 4.4.2-4 [694 kB] Get:46 http://piatti.debian.org/debian/ wheezy/main grep amd64 2.12-2 [454 kB] Get:47 http://piatti.debian.org/debian/ wheezy/main gzip amd64 1.5-1.1 [119 kB] Get:48 http://piatti.debian.org/debian/ wheezy/main hostname amd64 3.11 [15.0 kB] Get:49 http://piatti.debian.org/debian/ wheezy/main login amd64 1:4.1.5.1-1 [983 kB] Get:50 http://piatti.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-10 [335 kB] Get:51 http://piatti.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB] Get:52 http://piatti.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB] Get:53 http://piatti.debian.org/debian/ wheezy/main perl-base amd64 5.14.2-18 [1537 kB] Get:54 http://piatti.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB] Get:55 http://piatti.debian.org/debian/ wheezy/main sed amd64 4.2.1-10 [251 kB] Get:56 http://piatti.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-34 [133 kB] Get:57 http://piatti.debian.org/debian/ wheezy/main tar amd64 1.26+dfsg-0.1 [985 kB] Get:58 http://piatti.debian.org/debian/ wheezy/main base-passwd amd64 3.5.26 [46.3 kB] Get:59 http://piatti.debian.org/debian/ wheezy/main bsdutils amd64 1:2.20.1-5.3 [85.5 kB] Get:60 http://piatti.debian.org/debian/ wheezy/main ncurses-base all 5.9-10 [198 kB] Get:61 http://piatti.debian.org/debian/ wheezy/main libstdc++6 amd64 4.7.2-5 [332 kB] Get:62 http://piatti.debian.org/debian/ wheezy/main zlib1g amd64 1:1.2.7.dfsg-13 [87.4 kB] Get:63 http://piatti.debian.org/debian/ wheezy/main gpgv amd64 1.4.12-7 [226 kB] Get:64 http://piatti.debian.org/debian/ wheezy/main debian-archive-keyring all 2012.4 [30.4 kB] Get:65 http://piatti.debian.org/debian/ wheezy/main readline-common all 6.2+dfsg-0.1 [31.9 kB] Get:66 http://piatti.debian.org/debian/ wheezy/main libreadline6 amd64 6.2+dfsg-0.1 [166 kB] Get:67 http://piatti.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-20+nmu1 [23.1 kB] Get:68 http://piatti.debian.org/debian/ wheezy/main gnupg amd64 1.4.12-7 [1952 kB] Get:69 http://piatti.debian.org/debian/ wheezy/main libapt-pkg4.12 amd64 0.9.7.7 [896 kB] Get:70 http://piatti.debian.org/debian/ wheezy/main apt amd64 0.9.7.7 [1253 kB] Get:71 http://piatti.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-10 [113 kB] Get:72 http://piatti.debian.org/debian/ wheezy/main libss2 amd64 1.42.5-1 [61.4 kB] Get:73 http://piatti.debian.org/debian/ wheezy/main mawk amd64 1.3.3-17 [90.8 kB] Get:74 http://piatti.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-7.1 [228 kB] Get:75 http://piatti.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20120614-2 [237 kB] Get:76 http://piatti.debian.org/debian/ wheezy/main debconf-i18n all 1.5.49 [237 kB] Get:77 http://piatti.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.7-2 [127 kB] Get:78 http://piatti.debian.org/debian/ wheezy/main yagiuda amd64 1.19-8 [112 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.9 MB in 1s (30.6 MB/s) (Reading database ... 6174 files and directories currently installed.) Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.7_all.deb) ... Unpacking replacement sensible-utils ... Setting up sensible-utils (0.0.7) ... (Reading database ... 6186 files and directories currently installed.) Preparing to replace debianutils 3.4 (using .../debianutils_4.3.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (4.3.2) ... (Reading database ... 6212 files and directories currently installed.) Preparing to replace libc-bin 2.11.3-4 (using .../libc-bin_2.13-38_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-38) ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 6229 files and directories currently installed.) Preparing to replace libc6 2.11.3-4 (using .../libc6_2.13-38_amd64.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-38) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.7-base. (Reading database ... 6234 files and directories currently installed.) Unpacking gcc-4.7-base (from .../gcc-4.7-base_4.7.2-5_amd64.deb) ... Setting up gcc-4.7-base (4.7.2-5) ... Selecting previously deselected package multiarch-support. (Reading database ... 6241 files and directories currently installed.) Unpacking multiarch-support (from .../multiarch-support_2.13-38_amd64.deb) ... Setting up multiarch-support (2.13-38) ... (Reading database ... 6245 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.7.2-5_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.7.2-5) ... Selecting previously deselected package libsemanage-common. (Reading database ... 6245 files and directories currently installed.) Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ... Setting up libsemanage-common (2.1.6-6) ... (Reading database ... 6252 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.4-3_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.1.4-3) ... Selecting previously deselected package libustr-1.0-1. (Reading database ... 6252 files and directories currently installed.) Unpacking libustr-1.0-1 (from .../libustr-1.0-1_1.0.4-3_amd64.deb) ... Setting up libustr-1.0-1 (1.0.4-3) ... (Reading database ... 6263 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-6+squeeze1 (using .../libbz2-1.0_1.0.6-4_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.6-4) ... (Reading database ... 6263 files and directories currently installed.) Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.9-5_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.1.9-5) ... Selecting previously deselected package libsemanage1. (Reading database ... 6263 files and directories currently installed.) Unpacking libsemanage1 (from .../libsemanage1_2.1.6-6_amd64.deb) ... Setting up libsemanage1 (2.1.6-6) ... (Reading database ... 6268 files and directories currently installed.) Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.49_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.49) ... (Reading database ... 6271 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-6.1+squeeze1 (using .../libpam0g_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.3-7.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Selecting previously deselected package libdb5.1. (Reading database ... 6271 files and directories currently installed.) Unpacking libdb5.1 (from .../libdb5.1_5.1.29-5_amd64.deb) ... Setting up libdb5.1 (5.1.29-5) ... Selecting previously deselected package libpam-modules-bin. (Reading database ... 6277 files and directories currently installed.) Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_amd64.deb) ... Replacing files in old package libpam-modules ... Setting up libpam-modules-bin (1.1.3-7.1) ... (Reading database ... 6283 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-6.1+squeeze1 (using .../libpam-modules_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.3-7.1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 6282 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.5.1-1) ... (Reading database ... 6302 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.20.1-5.3) ... (Reading database ... 6303 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.20.1-5.3) ... (Reading database ... 6303 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-15_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.4-15) ... Selecting previously deselected package libtinfo5. (Reading database ... 6301 files and directories currently installed.) Unpacking libtinfo5 (from .../libtinfo5_5.9-10_amd64.deb) ... Setting up libtinfo5 (5.9-10) ... (Reading database ... 6310 files and directories currently installed.) Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_4.1+Debian8_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.1+Debian8) ... (Reading database ... 6312 files and directories currently installed.) Preparing to replace tzdata 2012g-0squeeze1 (using .../tzdata_2012j-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2012j-1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 25 15:10:41 UTC 2013. Universal Time is now: Mon Feb 25 15:10:41 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Selecting previously deselected package liblzma5. (Reading database ... 6312 files and directories currently installed.) Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20120614-2_amd64.deb) ... Setting up liblzma5 (5.1.1alpha+20120614-2) ... (Reading database ... 6321 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../archives/dpkg_1.16.9_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.9) ... (Reading database ... 6332 files and directories currently installed.) Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.20.1-5.3_amd64.deb) ... Removing obsolete conffile /etc/init.d/hwclockfirst.sh ... Unpacking replacement util-linux ... Setting up util-linux (2.20.1-5.3) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 6327 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-5_amd64.deb) ... Unpacking replacement insserv ... Setting up insserv (1.14.0-5) ... Installing new version of config file /etc/insserv.conf ... (Reading database ... 6317 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1+squeeze1 (using .../sysvinit-utils_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-34) ... (Reading database ... 6319 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1+squeeze1 (using .../sysv-rc_2.88dsf-34_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-34) ... Selecting previously unselected package libmount1. (Reading database ... 6320 files and directories currently installed.) Unpacking libmount1 (from .../libmount1_2.20.1-5.3_amd64.deb) ... Setting up libmount1 (2.20.1-5.3) ... (Reading database ... 6326 files and directories currently installed.) Preparing to replace mount 2.17.2-9 (using .../mount_2.20.1-5.3_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.20.1-5.3) ... (Reading database ... 6328 files and directories currently installed.) Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-8_amd64.deb) ... Unpacking replacement libattr1:amd64 ... Setting up libattr1:amd64 (1:2.4.46-8) ... (Reading database ... 6329 files and directories currently installed.) Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-8_amd64.deb) ... Unpacking replacement libacl1:amd64 ... Setting up libacl1:amd64 (2.2.51-8) ... (Reading database ... 6329 files and directories currently installed.) Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3.5_amd64.deb) ... Unpacking replacement coreutils ... Setting up coreutils (8.13-3.5) ... (Reading database ... 6250 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1+squeeze1 (using .../initscripts_2.88dsf-34_amd64.deb) ... Removing unmodified and obsolete conffile /etc/default/bootlogd ... Removing unmodified and obsolete conffile /etc/init.d/mountoverflowtmp ... Upgrading unmodified configuration file /etc/default/rcS ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-34) ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountall-bootclean.sh ... Installing new version of config file /etc/init.d/mountnfs.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/umountroot ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/default/tmpfs ... Installing new version of config file /etc/network/if-up.d/mountnfs ... guest environment detected: Linking /run to /var/run guest environment detected: Linking /run/lock to /var/lock guest environment detected: Linking /dev/shm to /run/shm (Reading database ... 6250 files and directories currently installed.) Preparing to replace base-files 6.0squeeze7 (using .../base-files_7.1_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (7.1) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating /etc/profile to current default. (Reading database ... 6253 files and directories currently installed.) Preparing to replace bash 4.1-3 (using .../bash_4.2+dfsg-0.1_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.2+dfsg-0.1) ... Installing new version of config file /etc/skel/.bashrc ... Installing new version of config file /etc/bash.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 6256 files and directories currently installed.) Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-3_amd64.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3) ... (Reading database ... 6256 files and directories currently installed.) Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-6_amd64.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.2-6) ... (Reading database ... 6257 files and directories currently installed.) Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42.5-1_amd64.deb) ... Unpacking replacement libcomerr2:amd64 ... Setting up libcomerr2:amd64 (1.42.5-1) ... (Reading database ... 6257 files and directories currently installed.) Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fslibs:amd64 ... Setting up e2fslibs:amd64 (1.42.5-1) ... (Reading database ... 6257 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42.5-1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... 6253 files and directories currently installed.) Preparing to replace findutils 4.4.2-1+b1 (using .../findutils_4.4.2-4_amd64.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-4) ... (Reading database ... 6253 files and directories currently installed.) Preparing to replace grep 2.6.3-3 (using .../archives/grep_2.12-2_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.12-2) ... (Reading database ... 6253 files and directories currently installed.) Preparing to replace gzip 1.3.12-9+squeeze1 (using .../gzip_1.5-1.1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.5-1.1) ... (Reading database ... 6253 files and directories currently installed.) Preparing to replace hostname 3.04 (using .../hostname_3.11_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.11) ... (Reading database ... 6252 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.5.1-1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.5.1-1) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... (Reading database ... 6267 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-10_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-10) ... (Reading database ... 6269 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Preparing to replace perl-base 5.10.1-17squeeze5 (using .../perl-base_5.14.2-18_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.14.2-18) ... (Reading database ... 6698 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Preparing to replace sed 4.2.1-7 (using .../sed_4.2.1-10_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-10) ... (Reading database ... 6698 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1+squeeze1 (using .../sysvinit_2.88dsf-34_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-34) ... sysvinit: creating /run/initctl Not restarting sysvinit: chroot detected (Reading database ... 6698 files and directories currently installed.) Preparing to replace tar 1.23-3 (using .../tar_1.26+dfsg-0.1_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.26+dfsg-0.1) ... (Reading database ... 6699 files and directories currently installed.) Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.26_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.26) ... (Reading database ... 6701 files and directories currently installed.) Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.20.1-5.3_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.20.1-5.3) ... (Reading database ... 6701 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-10_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-10) ... Installing new version of config file /etc/terminfo/README ... (Reading database ... 6703 files and directories currently installed.) Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.7.2-5_amd64.deb) ... Unpacking replacement libstdc++6:amd64 ... Setting up libstdc++6:amd64 (4.7.2-5) ... (Reading database ... 6703 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.4.dfsg-3 (using .../zlib1g_1%3a1.2.7.dfsg-13_amd64.deb) ... Unpacking replacement zlib1g:amd64 ... Setting up zlib1g:amd64 (1:1.2.7.dfsg-13) ... (Reading database ... 6703 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze1 (using .../gpgv_1.4.12-7_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.12-7) ... (Reading database ... 6703 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28+squeeze1 (using .../debian-archive-keyring_2012.4_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2012.4) ... (Reading database ... 6707 files and directories currently installed.) Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2+dfsg-0.1_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2+dfsg-0.1) ... (Reading database ... 6706 files and directories currently installed.) Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2+dfsg-0.1_amd64.deb) ... Unpacking replacement libreadline6:amd64 ... Setting up libreadline6:amd64 (6.2+dfsg-0.1) ... (Reading database ... 6706 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-20+nmu1_amd64.deb) ... Unpacking replacement libusb-0.1-4:amd64 ... Setting up libusb-0.1-4:amd64 (2:0.1.12-20+nmu1) ... (Reading database ... 6705 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze1 (using .../gnupg_1.4.12-7_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.12-7) ... Selecting previously unselected package libapt-pkg4.12:amd64. dpkg: considering deconfiguration of apt, which would be broken by installation of libapt-pkg4.12:amd64 ... dpkg: yes, will deconfigure apt (broken by libapt-pkg4.12:amd64) (Reading database ... 6694 files and directories currently installed.) Unpacking libapt-pkg4.12:amd64 (from .../libapt-pkg4.12_0.9.7.7_amd64.deb) ... De-configuring apt ... Setting up libapt-pkg4.12:amd64 (0.9.7.7) ... (Reading database ... 6742 files and directories currently installed.) Preparing to replace apt 0.8.10.3+squeeze1 (using .../archives/apt_0.9.7.7_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.7) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: Total number processed: 4 gpg: unchanged: 4 gpg: checking the trustdb gpg: WARNING: digest algorithm MD5 is deprecated gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information gpg: no ultimately trusted keys found (Reading database ... 6653 files and directories currently installed.) Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-10_amd64.deb) ... Unpacking replacement libncurses5:amd64 ... Setting up libncurses5:amd64 (5.9-10) ... (Reading database ... 6645 files and directories currently installed.) Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42.5-1_amd64.deb) ... Unpacking replacement libss2:amd64 ... Setting up libss2:amd64 (1.42.5-1) ... (Reading database ... 6645 files and directories currently installed.) Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-17_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libpam-runtime 1.1.1-6.1+squeeze1 (using .../libpam-runtime_1.1.3-7.1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7.1) ... (Reading database ... 6646 files and directories currently installed.) Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20120614-2_amd64.deb) ... Unpacking replacement xz-utils ... Setting up xz-utils (5.1.1alpha+20120614-2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode (Reading database ... 6648 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.49_all.deb) ... Unpacking replacement debconf-i18n ... Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.7-2_amd64.deb) ... Unpacking replacement gcc-4.4-base:amd64 ... Preparing to replace yagiuda 1.19-7 (using .../yagiuda_1.19-8_amd64.deb) ... Unpacking replacement yagiuda ... Setting up libtext-charwidth-perl (0.04-7+b1) ... Setting up libtext-iconv-perl (1.7-5) ... Setting up liblocale-gettext-perl (1.05-7+b1) ... Setting up mawk (1.3.3-17) ... Setting up debconf-i18n (1.5.49) ... Setting up gcc-4.4-base:amd64 (4.4.7-2) ... Setting up yagiuda (1.19-8) ... 1m57.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-yf', 'dist-upgrade'] 1m57.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'show', 'yagiuda'] 2m2.3s DUMP: Package: yagiuda Version: 1.19-8 Installed-Size: 290 Maintainer: Debian QA Group Architecture: amd64 Depends: libc6 (>= 2.7) Conflicts: psi3 Description: software to analyse performance of Yagi-Uda antennas Homepage: http://www.g8wrb.org/yagi/ Description-md5: 73e9369f3d7490b8ffcb8bae3e248310 Tag: field::electronics, hardware::hamradio, implemented-in::c, interface::commandline, role::program, use::TODO Section: hamradio Priority: extra Filename: pool/main/y/yagiuda/yagiuda_1.19-8_amd64.deb Size: 112228 MD5sum: 1d2640e4a3cf11648d4cc9510f1ada60 SHA1: fa4a7156a9dfe2f891885302ff41a8e36c03e027 SHA256: 50825da9d24218524626f04d8793558dc6ce7b136693d9ea8fd7ca7e76eab9bb 2m2.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'show', 'yagiuda'] 2m2.3s INFO: apt-cache knows about the following packages: yagiuda 2m2.3s INFO: Running scripts pre_install 2m2.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 2m2.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 2m2.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m2.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m2.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 2m2.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ wheezy/non-free amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/contrib amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=main origin piatti.debian.org Pinned packages: 2m2.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 2m2.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 2m2.4s DUMP: yagiuda: Installed: 1.19-8 Candidate: 1.19-8 Version table: *** 1.19-8 0 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 2m2.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 2m2.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda'] 2m2.8s DUMP: Reading package lists... Building dependency tree... Reading state information... yagiuda is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2m2.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda'] 2m2.8s INFO: Running scripts post_install 2m2.8s INFO: Running scripts post_distupgrade 2m2.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_distupgrade_exceptions'] 2m2.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_distupgrade_exceptions'] 2m2.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m2.8s DUMP: FIXING /usr/share/keyrings/debian-archive-removed-keys.gpg~ `/usr/share/keyrings/debian-archive-removed-keys.gpg~' -> `/usr/share/keyrings/debian-archive-removed-keys.gpg' 2m2.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m2.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m3.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m3.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m3.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m3.4s INFO: Running scripts pre_install 2m3.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 2m3.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_exceptions'] 2m3.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m3.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m3.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 2m3.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ wheezy/non-free amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/contrib amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages release o=Debian,a=testing,n=wheezy,l=Debian,c=main origin piatti.debian.org Pinned packages: 2m3.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy'] 2m3.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 2m3.5s DUMP: yagiuda: Installed: 1.19-8 Candidate: 1.19-8 Version table: *** 1.19-8 0 500 http://piatti.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 2m3.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-cache', 'policy', 'yagiuda'] 2m3.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda=1.19-8'] 2m3.9s DUMP: Reading package lists... Building dependency tree... Reading state information... yagiuda is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2m3.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', '-y', 'install', 'yagiuda=1.19-8'] 2m3.9s INFO: Running scripts post_install 2m3.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m4.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m4.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--get-selections', '*'] 2m4.2s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs:amd64 install e2fsprogs install findutils install gcc-4.4-base:amd64 install gcc-4.7-base:amd64 install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1:amd64 install libapt-pkg4.12:amd64 install libattr1:amd64 install libblkid1:amd64 install libbz2-1.0:amd64 install libc-bin install libc6:amd64 install libcomerr2:amd64 install libdb4.8 install libdb5.1:amd64 install libgcc1:amd64 install liblocale-gettext-perl install liblzma2 install liblzma5:amd64 install libmount1 install libncurses5:amd64 install libpam-modules:amd64 install libpam-modules-bin install libpam-runtime install libpam0g:amd64 install libreadline6:amd64 install libselinux1:amd64 install libsemanage-common install libsemanage1:amd64 install libsepol1:amd64 install libslang2:amd64 install libss2:amd64 install libstdc++6:amd64 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtinfo5:amd64 install libusb-0.1-4:amd64 install libustr-1.0-1:amd64 install libuuid1:amd64 install login install lsb-base install mawk install mount install multiarch-support install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install yagiuda install zlib1g:amd64 install 2m4.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--get-selections', '*'] 2m5.1s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', '-ac'] 2m5.6s DUMP: debsums: no md5sums for e2fslibs debsums: no md5sums for gcc-4.4-base debsums: no md5sums for gcc-4.7-base debsums: no md5sums for libacl1 debsums: no md5sums for libapt-pkg4.12 debsums: no md5sums for libattr1 debsums: no md5sums for libblkid1 debsums: no md5sums for libbz2-1.0 debsums: no md5sums for libc6 debsums: no md5sums for libcomerr2 debsums: no md5sums for libdb5.1 debsums: no md5sums for libgcc1 debsums: no md5sums for liblzma5 debsums: no md5sums for libncurses5 debsums: no md5sums for libpam-modules debsums: no md5sums for libpam0g debsums: no md5sums for libreadline6 debsums: no md5sums for libselinux1 debsums: no md5sums for libsemanage1 debsums: no md5sums for libsepol1 debsums: no md5sums for libslang2 debsums: no md5sums for libss2 debsums: no md5sums for libstdc++6 debsums: no md5sums for libtinfo5 debsums: no md5sums for libusb-0.1-4 debsums: no md5sums for libustr-1.0-1 debsums: no md5sums for libuuid1 debsums: no md5sums for zlib1g 2m5.6s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', '-ac'] 2m5.6s INFO: Running scripts pre_remove 2m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m5.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m5.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m5.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m5.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_exceptions'] 2m5.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/pre_remove_exceptions'] 2m5.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'remove', 'yagiuda'] 2m6.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: yagiuda 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 297 kB disk space will be freed. (Reading database ... 6659 files and directories currently installed.) Removing yagiuda ... 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'remove', 'yagiuda'] 2m6.6s INFO: Running scripts post_remove 2m6.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_remove_exceptions'] 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_remove_exceptions'] 2m6.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--purge', 'yagiuda'] 2m6.6s DUMP: dpkg: warning: ignoring request to remove yagiuda which isn't installed 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--purge', 'yagiuda'] 2m6.6s INFO: Running scripts post_purge 2m6.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_purge_exceptions'] 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'tmp/scripts/post_purge_exceptions'] 2m6.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--purge', '--pending'] 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--purge', '--pending'] 2m6.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--remove', '--pending'] 2m6.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg', '--remove', '--pending'] 2m6.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m6.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m6.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg-divert', '--list'] 2m6.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 2m6.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'dpkg-divert', '--list'] 2m6.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'clean'] 2m7.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'apt-get', 'clean'] 2m8.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'umount', '/proc'] 2m8.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWyQ3m7', 'umount', '/proc'] 2m8.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m8.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpWyQ3m7'] 2m8.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpWyQ3m7 2m8.6s INFO: PASS: Upgrading between Debian distributions. 2m8.6s INFO: PASS: All tests. 2m8.6s INFO: piuparts run ends. ret=0 End: 2013-02-25 15:11:02 UTC