Start: 2019-08-10 11:56:38 UTC Package: libperlx-define-perl Version: 0.101-4 Installed-Size: 22 Maintainer: Debian Perl Group Architecture: all Replaces: libmoops-perl (<< 0.036) Depends: libkeyword-simple-perl, libnamespace-clean-perl, perl Breaks: libmoops-perl (<< 0.036) Description: cute syntax for defining constants Homepage: https://metacpan.org/release/PerlX-Define Description-md5: 755ec9f7910bc4518183fa335fa0bd9f Section: perl Priority: optional Filename: pool/main/libp/libperlx-define-perl/libperlx-define-perl_0.101-4_all.deb Size: 6824 MD5sum: c50590e3f341fb5cf2017e89dc88958e SHA256: 56a0738a389c8322018149819f6e82f8065175e5832568f24a94430cfa33b85e Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz -d bullseye --no-upgrade-test --apt libperlx-define-perl=0.101-4 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.0.2~201907311723~1.0.1-11-g98f8c745 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz -d bullseye --no-upgrade-test --apt libperlx-define-perl=0.101-4 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u4 (2019-07-19) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpRnI9gV 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpRnI9gV 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/proc'] 0m1.8s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/proc'] 0m1.8s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts'] 0m1.8s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts'] 0m1.8s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/ptmx'] 0m1.8s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/ptmx'] 0m1.8s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/7', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/console'] 0m1.8s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/7', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/console'] 0m1.8s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/shm'] 0m1.8s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/shm'] 0m1.8s DEBUG: sources.list: deb http://mirror-ubc.debian.org/debian/ bullseye main 0m1.9s DEBUG: Created policy-rc.d and chmodded it. 0m1.9s DEBUG: Created resolv.conf. 0m1.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpRnI9gV/tmp/scripts/ 0m1.9s INFO: Running scripts post_chroot_unpack 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'update'] 0m5.7s DUMP: Get:1 http://mirror-ubc.debian.org/debian bullseye InRelease [117 kB] Get:2 http://mirror-ubc.debian.org/debian bullseye/main amd64 Packages [7918 kB] Get:3 http://mirror-ubc.debian.org/debian bullseye/main Translation-en [5968 kB] Fetched 14.0 MB in 3s (4788 kB/s) Reading package lists... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'update'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', '-yf', 'dist-upgrade'] 0m8.8s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following NEW packages will be installed: libpcre2-8-0 The following packages will be upgraded: bsdutils coreutils debconf fdisk libblkid1 libfdisk1 libmount1 libncursesw6 libpcre3 libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libtinfo6 libuuid1 mount ncurses-base ncurses-bin sysvinit-utils tar util-linux zlib1g 23 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 8410 kB of archives. After this operation, 742 kB of additional disk space will be used. Get:1 http://mirror-ubc.debian.org/debian bullseye/main amd64 bsdutils amd64 1:2.34-0.1 [121 kB] Get:2 http://mirror-ubc.debian.org/debian bullseye/main amd64 coreutils amd64 8.30-3+b1 [2708 kB] Get:3 http://mirror-ubc.debian.org/debian bullseye/main amd64 ncurses-bin amd64 6.1+20190713-2 [414 kB] Get:4 http://mirror-ubc.debian.org/debian bullseye/main amd64 tar amd64 1.30+dfsg-6+b1 [780 kB] Get:5 http://mirror-ubc.debian.org/debian bullseye/main amd64 libblkid1 amd64 2.34-0.1 [195 kB] Get:6 http://mirror-ubc.debian.org/debian bullseye/main amd64 libpcre2-8-0 amd64 10.32-5+b1 [213 kB] Get:7 http://mirror-ubc.debian.org/debian bullseye/main amd64 libselinux1 amd64 2.9-2+b2 [87.6 kB] Get:8 http://mirror-ubc.debian.org/debian bullseye/main amd64 libmount1 amd64 2.34-0.1 [210 kB] Get:9 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsmartcols1 amd64 2.34-0.1 [158 kB] Get:10 http://mirror-ubc.debian.org/debian bullseye/main amd64 libuuid1 amd64 2.34-0.1 [78.3 kB] Get:11 http://mirror-ubc.debian.org/debian bullseye/main amd64 libfdisk1 amd64 2.34-0.1 [236 kB] Get:12 http://mirror-ubc.debian.org/debian bullseye/main amd64 libtinfo6 amd64 6.1+20190713-2 [331 kB] Get:13 http://mirror-ubc.debian.org/debian bullseye/main amd64 libncursesw6 amd64 6.1+20190713-2 [133 kB] Get:14 http://mirror-ubc.debian.org/debian bullseye/main amd64 fdisk amd64 2.34-0.1 [180 kB] Get:15 http://mirror-ubc.debian.org/debian bullseye/main amd64 util-linux amd64 2.34-0.1 [1084 kB] Get:16 http://mirror-ubc.debian.org/debian bullseye/main amd64 ncurses-base all 6.1+20190713-2 [263 kB] Get:17 http://mirror-ubc.debian.org/debian bullseye/main amd64 sysvinit-utils amd64 2.95-4 [81.6 kB] Get:18 http://mirror-ubc.debian.org/debian bullseye/main amd64 debconf all 1.5.73 [145 kB] Get:19 http://mirror-ubc.debian.org/debian bullseye/main amd64 mount amd64 2.34-0.1 [176 kB] Get:20 http://mirror-ubc.debian.org/debian bullseye/main amd64 libpcre3 amd64 2:8.39-12+b1 [341 kB] Get:21 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsepol1 amd64 2.9-2+b2 [265 kB] Get:22 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsemanage-common all 2.9-3 [20.8 kB] Get:23 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsemanage1 amd64 2.9-3 [96.5 kB] Get:24 http://mirror-ubc.debian.org/debian bullseye/main amd64 zlib1g amd64 1:1.2.11.dfsg-1+b1 [91.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8410 kB in 0s (62.3 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6469 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.34-0.1_amd64.deb ... Unpacking bsdutils (1:2.34-0.1) over (1:2.33.1-0.1) ... Setting up bsdutils (1:2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6469 files and directories currently installed.) Preparing to unpack .../coreutils_8.30-3+b1_amd64.deb ... Unpacking coreutils (8.30-3+b1) over (8.30-3) ... Setting up coreutils (8.30-3+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6470 files and directories currently installed.) Preparing to unpack .../ncurses-bin_6.1+20190713-2_amd64.deb ... Unpacking ncurses-bin (6.1+20190713-2) over (6.1+20190713-1) ... Setting up ncurses-bin (6.1+20190713-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6470 files and directories currently installed.) Preparing to unpack .../tar_1.30+dfsg-6+b1_amd64.deb ... Unpacking tar (1.30+dfsg-6+b1) over (1.30+dfsg-6) ... Setting up tar (1.30+dfsg-6+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6471 files and directories currently installed.) Preparing to unpack .../libblkid1_2.34-0.1_amd64.deb ... Unpacking libblkid1:amd64 (2.34-0.1) over (2.33.1-0.1) ... Setting up libblkid1:amd64 (2.34-0.1) ... Selecting previously unselected package libpcre2-8-0:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6471 files and directories currently installed.) Preparing to unpack .../libpcre2-8-0_10.32-5+b1_amd64.deb ... Unpacking libpcre2-8-0:amd64 (10.32-5+b1) ... Setting up libpcre2-8-0:amd64 (10.32-5+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libselinux1_2.9-2+b2_amd64.deb ... Unpacking libselinux1:amd64 (2.9-2+b2) over (2.8-1+b1) ... Setting up libselinux1:amd64 (2.9-2+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libmount1_2.34-0.1_amd64.deb ... Unpacking libmount1:amd64 (2.34-0.1) over (2.33.1-0.1) ... Setting up libmount1:amd64 (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.34-0.1_amd64.deb ... Unpacking libsmartcols1:amd64 (2.34-0.1) over (2.33.1-0.1) ... Setting up libsmartcols1:amd64 (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libuuid1_2.34-0.1_amd64.deb ... Unpacking libuuid1:amd64 (2.34-0.1) over (2.33.1-0.1) ... Setting up libuuid1:amd64 (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libfdisk1_2.34-0.1_amd64.deb ... Unpacking libfdisk1:amd64 (2.34-0.1) over (2.33.1-0.1) ... Setting up libfdisk1:amd64 (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libtinfo6_6.1+20190713-2_amd64.deb ... Unpacking libtinfo6:amd64 (6.1+20190713-2) over (6.1+20190713-1) ... Setting up libtinfo6:amd64 (6.1+20190713-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../libncursesw6_6.1+20190713-2_amd64.deb ... Unpacking libncursesw6:amd64 (6.1+20190713-2) over (6.1+20190713-1) ... Setting up libncursesw6:amd64 (6.1+20190713-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../fdisk_2.34-0.1_amd64.deb ... Unpacking fdisk (2.34-0.1) over (2.33.1-0.1) ... Setting up fdisk (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../util-linux_2.34-0.1_amd64.deb ... Unpacking util-linux (2.34-0.1) over (2.33.1-0.1) ... Setting up util-linux (2.34-0.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../ncurses-base_6.1+20190713-2_all.deb ... Unpacking ncurses-base (6.1+20190713-2) over (6.1+20190713-1) ... Setting up ncurses-base (6.1+20190713-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_2.95-4_amd64.deb ... Unpacking sysvinit-utils (2.95-4) over (2.95-2) ... Setting up sysvinit-utils (2.95-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../debconf_1.5.73_all.deb ... Unpacking debconf (1.5.73) over (1.5.72) ... Setting up debconf (1.5.73) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6479 files and directories currently installed.) Preparing to unpack .../mount_2.34-0.1_amd64.deb ... Unpacking mount (2.34-0.1) over (2.33.1-0.1) ... Preparing to unpack .../libpcre3_2%3a8.39-12+b1_amd64.deb ... Unpacking libpcre3:amd64 (2:8.39-12+b1) over (2:8.39-12) ... Setting up libpcre3:amd64 (2:8.39-12+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6480 files and directories currently installed.) Preparing to unpack .../libsepol1_2.9-2+b2_amd64.deb ... Unpacking libsepol1:amd64 (2.9-2+b2) over (2.8-1) ... Setting up libsepol1:amd64 (2.9-2+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6481 files and directories currently installed.) Preparing to unpack .../libsemanage-common_2.9-3_all.deb ... Unpacking libsemanage-common (2.9-3) over (2.8-2) ... Setting up libsemanage-common (2.9-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6482 files and directories currently installed.) Preparing to unpack .../libsemanage1_2.9-3_amd64.deb ... Unpacking libsemanage1:amd64 (2.9-3) over (2.8-2) ... Setting up libsemanage1:amd64 (2.9-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6482 files and directories currently installed.) Preparing to unpack .../zlib1g_1%3a1.2.11.dfsg-1+b1_amd64.deb ... Unpacking zlib1g:amd64 (1:1.2.11.dfsg-1+b1) over (1:1.2.11.dfsg-1) ... Setting up zlib1g:amd64 (1:1.2.11.dfsg-1+b1) ... Setting up mount (2.34-0.1) ... Processing triggers for libc-bin (2.28-10) ... 0m8.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', '-yf', 'dist-upgrade'] 0m8.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m9.2s DUMP: 7bcd13d2d81054b23da699826195befc - 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m9.2s INFO: Running scripts post_setup 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_dummy_users'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_dummy_users'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_forbid_home'] 0m9.7s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_forbid_home'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_force-unsafe-io'] 0m9.7s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' dpkg-divert: warning: diverting file '/bin/sync' from an Essential package with rename is dangerous, use --no-rename '/bin/sync' -> 'true' 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_force-unsafe-io'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_minimize'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_minimize'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_squeeze-backports'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_squeeze-backports'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_zz_backports'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_setup_zz_backports'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'clean'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'clean'] 0m9.7s DEBUG: Recording chroot state 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m10.2s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 1.8.2 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.46 install ok installed bash bash 5.0-4 install ok installed bsdutils bsdutils 1:2.34-0.1 install ok installed coreutils coreutils 8.30-3+b1 install ok installed dash dash 0.5.10.2-6 install ok installed debconf debconf 1.5.73 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.8.6.3 install ok installed diffutils diffutils 1:3.7-3 install ok installed dpkg dpkg 1.19.7 install ok installed e2fsprogs e2fsprogs 1.45.3-3 install ok installed fdisk fdisk 2.34-0.1 install ok installed findutils findutils 4.6.0+git+20190510-2 install ok installed gcc-9-base:amd64 gcc-9-base 9.1.0-10 install ok installed gpgv gpgv 2.2.17-3 install ok installed grep grep 3.3-1 install ok installed gzip gzip 1.9-3 install ok installed hostname hostname 3.21 install ok installed init-system-helpers init-system-helpers 1.57 install ok installed libacl1:amd64 libacl1 2.2.53-4 install ok installed libapt-pkg5.0:amd64 libapt-pkg5.0 1.8.2 install ok installed libattr1:amd64 libattr1 1:2.4.48-4 install ok installed libaudit-common libaudit-common 1:2.8.5-2 install ok installed libaudit1:amd64 libaudit1 1:2.8.5-2 install ok installed libblkid1:amd64 libblkid1 2.34-0.1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.6-9.2 install ok installed libc-bin libc-bin 2.28-10 install ok installed libc6:amd64 libc6 2.28-10 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2 install ok installed libcom-err2:amd64 libcom-err2 1.45.3-3 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.249 install ok installed libext2fs2:amd64 libext2fs2 1.45.3-3 install ok installed libfdisk1:amd64 libfdisk1 2.34-0.1 install ok installed libffi6:amd64 libffi6 3.2.1-9 install ok installed libgcc1:amd64 libgcc1 1:9.1.0-10 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.4-5 install ok installed libgmp10:amd64 libgmp10 2:6.1.2+dfsg-4 install ok installed libgnutls30:amd64 libgnutls30 3.6.8-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.36-7 install ok installed libhogweed4:amd64 libhogweed4 3.4.1-1 install ok installed libidn2-0:amd64 libidn2-0 2.2.0-1 install ok installed liblz4-1:amd64 liblz4-1 1.8.3-1 install ok installed liblzma5:amd64 liblzma5 5.2.4-1 install ok installed libmount1:amd64 libmount1 2.34-0.1 install ok installed libncursesw6:amd64 libncursesw6 6.1+20190713-2 install ok installed libnettle6:amd64 libnettle6 3.4.1-1 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.15-2 install ok installed libpam-modules:amd64 libpam-modules 1.3.1-5 install ok installed libpam-modules-bin libpam-modules-bin 1.3.1-5 install ok installed libpam-runtime libpam-runtime 1.3.1-5 install ok installed libpam0g:amd64 libpam0g 1.3.1-5 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.32-5+b1 install ok installed libpcre3:amd64 libpcre3 2:8.39-12+b1 install ok installed libseccomp2:amd64 libseccomp2 2.4.1-2 install ok installed libselinux1:amd64 libselinux1 2.9-2+b2 install ok installed libsemanage-common libsemanage-common 2.9-3 install ok installed libsemanage1:amd64 libsemanage1 2.9-3 install ok installed libsepol1:amd64 libsepol1 2.9-2+b2 install ok installed libsmartcols1:amd64 libsmartcols1 2.34-0.1 install ok installed libss2:amd64 libss2 1.45.3-3 install ok installed libstdc++6:amd64 libstdc++6 9.1.0-10 install ok installed libsystemd0:amd64 libsystemd0 241-7 install ok installed libtasn1-6:amd64 libtasn1-6 4.14-2 install ok installed libtinfo6:amd64 libtinfo6 6.1+20190713-2 install ok installed libudev1:amd64 libudev1 241-7 install ok installed libunistring2:amd64 libunistring2 0.9.10-2 install ok installed libuuid1:amd64 libuuid1 2.34-0.1 install ok installed libzstd1:amd64 libzstd1 1.3.8+dfsg-3 install ok installed login login 1:4.7-2 install ok installed logsave logsave 1.45.3-3 install ok installed mawk mawk 1.3.3-17+b3 install ok installed mount mount 2.34-0.1 install ok installed ncurses-base ncurses-base 6.1+20190713-2 install ok installed ncurses-bin ncurses-bin 6.1+20190713-2 install ok installed passwd passwd 1:4.7-2 install ok installed perl-base perl-base 5.28.1-6 install ok installed sed sed 4.7-1 install ok installed sysvinit-utils sysvinit-utils 2.95-4 install ok installed tar tar 1.30+dfsg-6+b1 install ok installed tzdata tzdata 2019b-1 install ok installed util-linux util-linux 2.34-0.1 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-1+b1 0m10.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-divert', '--list'] 0m10.3s DUMP: local diversion of /bin/sync to /bin/sync.distrib diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /home to /home.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-divert', '--list'] 0m10.3s INFO: Running scripts is_testable 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/is_testable_uninstallable'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/is_testable_uninstallable'] 0m10.3s INFO: apt-cache does not know about any of the requested packages 0m10.3s INFO: Running scripts pre_test 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_test_exceptions'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_test_exceptions'] 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_test_root_password'] 0m10.3s DUMP: New password: Retype new password: passwd: password updated successfully 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_test_root_password'] 0m10.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m10.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m11.1s DEBUG: No broken symlinks as far as we can find. 0m11.1s INFO: Running scripts pre_install 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_database-server'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_database-server'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_exceptions'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_exceptions'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_extras'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_extras'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_foreign_architecture'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_foreign_architecture'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m11.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m11.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m12.0s DEBUG: No broken symlinks as far as we can find. 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-cache', 'policy'] 0m12.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror-ubc.debian.org/debian bullseye/main amd64 Packages release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=amd64 origin mirror-ubc.debian.org Pinned packages: 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-cache', 'policy'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-cache', 'policy', 'libperlx-define-perl'] 0m12.7s DUMP: libperlx-define-perl: Installed: (none) Candidate: 0.101-4 Version table: 0.101-4 500 500 http://mirror-ubc.debian.org/debian bullseye/main amd64 Packages 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-cache', 'policy', 'libperlx-define-perl'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', '-y', 'install', 'libperlx-define-perl=0.101-4'] 0m15.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libb-hooks-endofscope-perl libb-hooks-op-check-perl libdevel-callchecker-perl libdynaloader-functions-perl libgdbm-compat4 libgdbm6 libkeyword-simple-perl libmodule-implementation-perl libmodule-runtime-perl libnamespace-clean-perl libpackage-stash-perl libpackage-stash-xs-perl libparams-classify-perl libperl5.28 libsub-exporter-progressive-perl libsub-identify-perl libsub-name-perl libtry-tiny-perl libvariable-magic-perl netbase perl perl-modules-5.28 Suggested packages: gdbm-l10n libscalar-number-perl sensible-utils perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libb-debug-perl liblocale-codes-perl The following NEW packages will be installed: libb-hooks-endofscope-perl libb-hooks-op-check-perl libdevel-callchecker-perl libdynaloader-functions-perl libgdbm-compat4 libgdbm6 libkeyword-simple-perl libmodule-implementation-perl libmodule-runtime-perl libnamespace-clean-perl libpackage-stash-perl libpackage-stash-xs-perl libparams-classify-perl libperl5.28 libperlx-define-perl libsub-exporter-progressive-perl libsub-identify-perl libsub-name-perl libtry-tiny-perl libvariable-magic-perl netbase perl perl-modules-5.28 0 upgraded, 23 newly installed, 0 to remove and 0 not upgraded. Need to get 7384 kB of archives. After this operation, 47.9 MB of additional disk space will be used. Get:1 http://mirror-ubc.debian.org/debian bullseye/main amd64 perl-modules-5.28 all 5.28.1-6 [2873 kB] Get:2 http://mirror-ubc.debian.org/debian bullseye/main amd64 libgdbm6 amd64 1.18.1-4+b1 [64.9 kB] Get:3 http://mirror-ubc.debian.org/debian bullseye/main amd64 libgdbm-compat4 amd64 1.18.1-4+b1 [44.4 kB] Get:4 http://mirror-ubc.debian.org/debian bullseye/main amd64 libperl5.28 amd64 5.28.1-6 [3883 kB] Get:5 http://mirror-ubc.debian.org/debian bullseye/main amd64 perl amd64 5.28.1-6 [204 kB] Get:6 http://mirror-ubc.debian.org/debian bullseye/main amd64 netbase all 5.6 [19.4 kB] Get:7 http://mirror-ubc.debian.org/debian bullseye/main amd64 libb-hooks-op-check-perl amd64 0.22-1+b1 [11.4 kB] Get:8 http://mirror-ubc.debian.org/debian bullseye/main amd64 libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get:9 http://mirror-ubc.debian.org/debian bullseye/main amd64 libdevel-callchecker-perl amd64 0.008-1 [15.7 kB] Get:10 http://mirror-ubc.debian.org/debian bullseye/main amd64 libparams-classify-perl amd64 0.015-1+b1 [25.5 kB] Get:11 http://mirror-ubc.debian.org/debian bullseye/main amd64 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get:12 http://mirror-ubc.debian.org/debian bullseye/main amd64 libtry-tiny-perl all 0.30-1 [23.3 kB] Get:13 http://mirror-ubc.debian.org/debian bullseye/main amd64 libmodule-implementation-perl all 0.09-1 [12.9 kB] Get:14 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get:15 http://mirror-ubc.debian.org/debian bullseye/main amd64 libvariable-magic-perl amd64 0.62-1+b1 [45.9 kB] Get:16 http://mirror-ubc.debian.org/debian bullseye/main amd64 libb-hooks-endofscope-perl all 0.24-1 [18.6 kB] Get:17 http://mirror-ubc.debian.org/debian bullseye/main amd64 libkeyword-simple-perl amd64 0.04-1+b1 [11.0 kB] Get:18 http://mirror-ubc.debian.org/debian bullseye/main amd64 libpackage-stash-perl all 0.38-1 [21.7 kB] Get:19 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsub-identify-perl amd64 0.14-1+b1 [12.0 kB] Get:20 http://mirror-ubc.debian.org/debian bullseye/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:21 http://mirror-ubc.debian.org/debian bullseye/main amd64 libnamespace-clean-perl all 0.27-1 [17.3 kB] Get:22 http://mirror-ubc.debian.org/debian bullseye/main amd64 libpackage-stash-xs-perl amd64 0.29-1 [19.8 kB] Get:23 http://mirror-ubc.debian.org/debian bullseye/main amd64 libperlx-define-perl all 0.101-4 [6824 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 7384 kB in 0s (36.8 MB/s) Selecting previously unselected package perl-modules-5.28. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6485 files and directories currently installed.) Preparing to unpack .../00-perl-modules-5.28_5.28.1-6_all.deb ... Unpacking perl-modules-5.28 (5.28.1-6) ... Selecting previously unselected package libgdbm6:amd64. Preparing to unpack .../01-libgdbm6_1.18.1-4+b1_amd64.deb ... Unpacking libgdbm6:amd64 (1.18.1-4+b1) ... Selecting previously unselected package libgdbm-compat4:amd64. Preparing to unpack .../02-libgdbm-compat4_1.18.1-4+b1_amd64.deb ... Unpacking libgdbm-compat4:amd64 (1.18.1-4+b1) ... Selecting previously unselected package libperl5.28:amd64. Preparing to unpack .../03-libperl5.28_5.28.1-6_amd64.deb ... Unpacking libperl5.28:amd64 (5.28.1-6) ... Selecting previously unselected package perl. Preparing to unpack .../04-perl_5.28.1-6_amd64.deb ... Unpacking perl (5.28.1-6) ... Selecting previously unselected package netbase. Preparing to unpack .../05-netbase_5.6_all.deb ... Unpacking netbase (5.6) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../06-libb-hooks-op-check-perl_0.22-1+b1_amd64.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../07-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../08-libdevel-callchecker-perl_0.008-1_amd64.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../09-libparams-classify-perl_0.015-1+b1_amd64.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../10-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../11-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../12-libmodule-implementation-perl_0.09-1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../13-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libvariable-magic-perl. Preparing to unpack .../14-libvariable-magic-perl_0.62-1+b1_amd64.deb ... Unpacking libvariable-magic-perl (0.62-1+b1) ... Selecting previously unselected package libb-hooks-endofscope-perl. Preparing to unpack .../15-libb-hooks-endofscope-perl_0.24-1_all.deb ... Unpacking libb-hooks-endofscope-perl (0.24-1) ... Selecting previously unselected package libkeyword-simple-perl. Preparing to unpack .../16-libkeyword-simple-perl_0.04-1+b1_amd64.deb ... Unpacking libkeyword-simple-perl (0.04-1+b1) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../17-libpackage-stash-perl_0.38-1_all.deb ... Unpacking libpackage-stash-perl (0.38-1) ... Selecting previously unselected package libsub-identify-perl. Preparing to unpack .../18-libsub-identify-perl_0.14-1+b1_amd64.deb ... Unpacking libsub-identify-perl (0.14-1+b1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../19-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libnamespace-clean-perl. Preparing to unpack .../20-libnamespace-clean-perl_0.27-1_all.deb ... Unpacking libnamespace-clean-perl (0.27-1) ... Selecting previously unselected package libpackage-stash-xs-perl. Preparing to unpack .../21-libpackage-stash-xs-perl_0.29-1_amd64.deb ... Unpacking libpackage-stash-xs-perl (0.29-1) ... Selecting previously unselected package libperlx-define-perl. Preparing to unpack .../22-libperlx-define-perl_0.101-4_all.deb ... Unpacking libperlx-define-perl (0.101-4) ... Setting up perl-modules-5.28 (5.28.1-6) ... Setting up netbase (5.6) ... Setting up libgdbm6:amd64 (1.18.1-4+b1) ... Setting up libgdbm-compat4:amd64 (1.18.1-4+b1) ... Setting up libperl5.28:amd64 (5.28.1-6) ... Setting up perl (5.28.1-6) ... Setting up libpackage-stash-xs-perl (0.29-1) ... Setting up libvariable-magic-perl (0.62-1+b1) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libsub-identify-perl (0.14-1+b1) ... Setting up libkeyword-simple-perl (0.04-1+b1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libmodule-implementation-perl (0.09-1) ... Setting up libpackage-stash-perl (0.38-1) ... Setting up libb-hooks-endofscope-perl (0.24-1) ... Setting up libnamespace-clean-perl (0.27-1) ... Setting up libperlx-define-perl (0.101-4) ... Processing triggers for libc-bin (2.28-10) ... 0m15.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', '-y', 'install', 'libperlx-define-perl=0.101-4'] 0m15.1s INFO: Running scripts post_install 0m15.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_install_exceptions'] 0m15.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_install_exceptions'] 0m15.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m16.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m16.7s DEBUG: No broken symlinks as far as we can find. 0m17.1s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', '-ac', '--ignore-obsolete'] 0m17.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', '-ac', '--ignore-obsolete'] 0m17.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.8s DUMP: 0.15.1 0m17.8s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.8s INFO: Running adequate version 0.15.1 now. 0m17.8s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'libperlx-define-perl'] 0m17.9s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'libperlx-define-perl'] 0m17.9s INFO: Running scripts pre_remove 0m17.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_exceptions'] 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/pre_remove_exceptions'] 0m18.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m18.7s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 1.8.2 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.46 install ok installed bash bash 5.0-4 install ok installed bsdutils bsdutils 1:2.34-0.1 install ok installed coreutils coreutils 8.30-3+b1 install ok installed dash dash 0.5.10.2-6 install ok installed debconf debconf 1.5.73 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.8.6.3 install ok installed diffutils diffutils 1:3.7-3 install ok installed dpkg dpkg 1.19.7 install ok installed e2fsprogs e2fsprogs 1.45.3-3 install ok installed fdisk fdisk 2.34-0.1 install ok installed findutils findutils 4.6.0+git+20190510-2 install ok installed gcc-9-base:amd64 gcc-9-base 9.1.0-10 install ok installed gpgv gpgv 2.2.17-3 install ok installed grep grep 3.3-1 install ok installed gzip gzip 1.9-3 install ok installed hostname hostname 3.21 install ok installed init-system-helpers init-system-helpers 1.57 install ok installed libacl1:amd64 libacl1 2.2.53-4 install ok installed libapt-pkg5.0:amd64 libapt-pkg5.0 1.8.2 install ok installed libattr1:amd64 libattr1 1:2.4.48-4 install ok installed libaudit-common libaudit-common 1:2.8.5-2 install ok installed libaudit1:amd64 libaudit1 1:2.8.5-2 install ok installed libb-hooks-endofscope-perl libb-hooks-endofscope-perl 0.24-1 install ok installed libb-hooks-op-check-perl libb-hooks-op-check-perl 0.22-1+b1 install ok installed libblkid1:amd64 libblkid1 2.34-0.1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.6-9.2 install ok installed libc-bin libc-bin 2.28-10 install ok installed libc6:amd64 libc6 2.28-10 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2 install ok installed libcom-err2:amd64 libcom-err2 1.45.3-3 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.249 install ok installed libdevel-callchecker-perl libdevel-callchecker-perl 0.008-1 install ok installed libdynaloader-functions-perl libdynaloader-functions-perl 0.003-1 install ok installed libext2fs2:amd64 libext2fs2 1.45.3-3 install ok installed libfdisk1:amd64 libfdisk1 2.34-0.1 install ok installed libffi6:amd64 libffi6 3.2.1-9 install ok installed libgcc1:amd64 libgcc1 1:9.1.0-10 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.4-5 install ok installed libgdbm-compat4:amd64 libgdbm-compat4 1.18.1-4+b1 install ok installed libgdbm6:amd64 libgdbm6 1.18.1-4+b1 install ok installed libgmp10:amd64 libgmp10 2:6.1.2+dfsg-4 install ok installed libgnutls30:amd64 libgnutls30 3.6.8-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.36-7 install ok installed libhogweed4:amd64 libhogweed4 3.4.1-1 install ok installed libidn2-0:amd64 libidn2-0 2.2.0-1 install ok installed libkeyword-simple-perl libkeyword-simple-perl 0.04-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.8.3-1 install ok installed liblzma5:amd64 liblzma5 5.2.4-1 install ok installed libmodule-implementation-perl libmodule-implementation-perl 0.09-1 install ok installed libmodule-runtime-perl libmodule-runtime-perl 0.016-1 install ok installed libmount1:amd64 libmount1 2.34-0.1 install ok installed libnamespace-clean-perl libnamespace-clean-perl 0.27-1 install ok installed libncursesw6:amd64 libncursesw6 6.1+20190713-2 install ok installed libnettle6:amd64 libnettle6 3.4.1-1 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.15-2 install ok installed libpackage-stash-perl libpackage-stash-perl 0.38-1 install ok installed libpackage-stash-xs-perl libpackage-stash-xs-perl 0.29-1 install ok installed libpam-modules:amd64 libpam-modules 1.3.1-5 install ok installed libpam-modules-bin libpam-modules-bin 1.3.1-5 install ok installed libpam-runtime libpam-runtime 1.3.1-5 install ok installed libpam0g:amd64 libpam0g 1.3.1-5 install ok installed libparams-classify-perl libparams-classify-perl 0.015-1+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.32-5+b1 install ok installed libpcre3:amd64 libpcre3 2:8.39-12+b1 install ok installed libperl5.28:amd64 libperl5.28 5.28.1-6 install ok installed libperlx-define-perl libperlx-define-perl 0.101-4 install ok installed libseccomp2:amd64 libseccomp2 2.4.1-2 install ok installed libselinux1:amd64 libselinux1 2.9-2+b2 install ok installed libsemanage-common libsemanage-common 2.9-3 install ok installed libsemanage1:amd64 libsemanage1 2.9-3 install ok installed libsepol1:amd64 libsepol1 2.9-2+b2 install ok installed libsmartcols1:amd64 libsmartcols1 2.34-0.1 install ok installed libss2:amd64 libss2 1.45.3-3 install ok installed libstdc++6:amd64 libstdc++6 9.1.0-10 install ok installed libsub-exporter-progressive-perl libsub-exporter-progressive-perl 0.001013-1 install ok installed libsub-identify-perl libsub-identify-perl 0.14-1+b1 install ok installed libsub-name-perl libsub-name-perl 0.21-1+b3 install ok installed libsystemd0:amd64 libsystemd0 241-7 install ok installed libtasn1-6:amd64 libtasn1-6 4.14-2 install ok installed libtinfo6:amd64 libtinfo6 6.1+20190713-2 install ok installed libtry-tiny-perl libtry-tiny-perl 0.30-1 install ok installed libudev1:amd64 libudev1 241-7 install ok installed libunistring2:amd64 libunistring2 0.9.10-2 install ok installed libuuid1:amd64 libuuid1 2.34-0.1 install ok installed libvariable-magic-perl libvariable-magic-perl 0.62-1+b1 install ok installed libzstd1:amd64 libzstd1 1.3.8+dfsg-3 install ok installed login login 1:4.7-2 install ok installed logsave logsave 1.45.3-3 install ok installed mawk mawk 1.3.3-17+b3 install ok installed mount mount 2.34-0.1 install ok installed ncurses-base ncurses-base 6.1+20190713-2 install ok installed ncurses-bin ncurses-bin 6.1+20190713-2 install ok installed netbase netbase 5.6 install ok installed passwd passwd 1:4.7-2 install ok installed perl perl 5.28.1-6 install ok installed perl-base perl-base 5.28.1-6 install ok installed perl-modules-5.28 perl-modules-5.28 5.28.1-6 install ok installed sed sed 4.7-1 install ok installed sysvinit-utils sysvinit-utils 2.95-4 install ok installed tar tar 1.30+dfsg-6+b1 install ok installed tzdata tzdata 2019b-1 install ok installed util-linux util-linux 2.34-0.1 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-1+b1 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m18.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'remove', 'libb-hooks-endofscope-perl', 'libsub-exporter-progressive-perl', 'libgdbm-compat4:amd64', 'libpackage-stash-xs-perl', 'libgdbm6:amd64', 'libnamespace-clean-perl', 'perl', 'libsub-identify-perl', 'libperl5.28:amd64', 'netbase', 'libparams-classify-perl', 'libdynaloader-functions-perl', 'libb-hooks-op-check-perl', 'libmodule-runtime-perl', 'libsub-name-perl', 'perl-modules-5.28', 'libtry-tiny-perl', 'libkeyword-simple-perl', 'libmodule-implementation-perl', 'libvariable-magic-perl', 'libpackage-stash-perl', 'libdevel-callchecker-perl', 'libperlx-define-perl'] 0m19.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libb-hooks-endofscope-perl libb-hooks-op-check-perl libdevel-callchecker-perl libdynaloader-functions-perl libgdbm-compat4 libgdbm6 libkeyword-simple-perl libmodule-implementation-perl libmodule-runtime-perl libnamespace-clean-perl libpackage-stash-perl libpackage-stash-xs-perl libparams-classify-perl libperl5.28 libperlx-define-perl libsub-exporter-progressive-perl libsub-identify-perl libsub-name-perl libtry-tiny-perl libvariable-magic-perl netbase perl perl-modules-5.28 0 upgraded, 0 newly installed, 23 to remove and 0 not upgraded. After this operation, 47.9 MB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8630 files and directories currently installed.) Removing libperlx-define-perl (0.101-4) ... Removing libnamespace-clean-perl (0.27-1) ... Removing libb-hooks-endofscope-perl (0.24-1) ... Removing libpackage-stash-perl (0.38-1) ... Removing libmodule-implementation-perl (0.09-1) ... Removing libmodule-runtime-perl (0.016-1) ... Removing libparams-classify-perl (0.015-1+b1) ... Removing libdevel-callchecker-perl (0.008-1) ... Removing libb-hooks-op-check-perl (0.22-1+b1) ... Removing libdynaloader-functions-perl (0.003-1) ... Removing libvariable-magic-perl (0.62-1+b1) ... Removing libtry-tiny-perl (0.30-1) ... Removing libkeyword-simple-perl (0.04-1+b1) ... Removing libpackage-stash-xs-perl (0.29-1) ... Removing libsub-exporter-progressive-perl (0.001013-1) ... Removing libsub-identify-perl (0.14-1+b1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing netbase (5.6) ... Removing perl (5.28.1-6) ... Removing libperl5.28:amd64 (5.28.1-6) ... Removing libgdbm-compat4:amd64 (1.18.1-4+b1) ... Removing libgdbm6:amd64 (1.18.1-4+b1) ... Removing perl-modules-5.28 (5.28.1-6) ... Processing triggers for libc-bin (2.28-10) ... 0m19.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'remove', 'libb-hooks-endofscope-perl', 'libsub-exporter-progressive-perl', 'libgdbm-compat4:amd64', 'libpackage-stash-xs-perl', 'libgdbm6:amd64', 'libnamespace-clean-perl', 'perl', 'libsub-identify-perl', 'libperl5.28:amd64', 'netbase', 'libparams-classify-perl', 'libdynaloader-functions-perl', 'libb-hooks-op-check-perl', 'libmodule-runtime-perl', 'libsub-name-perl', 'perl-modules-5.28', 'libtry-tiny-perl', 'libkeyword-simple-perl', 'libmodule-implementation-perl', 'libvariable-magic-perl', 'libpackage-stash-perl', 'libdevel-callchecker-perl', 'libperlx-define-perl'] 0m19.3s INFO: Running scripts post_remove 0m19.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_remove_exceptions'] 0m19.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_remove_exceptions'] 0m19.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', 'libb-hooks-endofscope-perl', 'libsub-exporter-progressive-perl', 'libgdbm-compat4:amd64', 'libpackage-stash-xs-perl', 'libgdbm6:amd64', 'libnamespace-clean-perl', 'perl', 'libsub-identify-perl', 'libperl5.28:amd64', 'netbase', 'libparams-classify-perl', 'libdynaloader-functions-perl', 'libb-hooks-op-check-perl', 'libmodule-runtime-perl', 'libsub-name-perl', 'perl-modules-5.28', 'libtry-tiny-perl', 'libkeyword-simple-perl', 'libmodule-implementation-perl', 'libvariable-magic-perl', 'libpackage-stash-perl', 'libdevel-callchecker-perl'] 0m19.3s DUMP: dpkg: warning: ignoring request to remove libb-hooks-endofscope-perl which isn't installed dpkg: warning: ignoring request to remove libsub-exporter-progressive-perl which isn't installed dpkg: warning: ignoring request to remove libgdbm-compat4 which isn't installed dpkg: warning: ignoring request to remove libpackage-stash-xs-perl which isn't installed dpkg: warning: ignoring request to remove libgdbm6 which isn't installed dpkg: warning: ignoring request to remove libnamespace-clean-perl which isn't installed (Reading database ... 6491 files and directories currently installed.) Purging configuration files for perl (5.28.1-6) ... dpkg: warning: ignoring request to remove libsub-identify-perl which isn't installed dpkg: warning: ignoring request to remove libperl5.28 which isn't installed Purging configuration files for netbase (5.6) ... dpkg: warning: ignoring request to remove libparams-classify-perl which isn't installed dpkg: warning: ignoring request to remove libdynaloader-functions-perl which isn't installed dpkg: warning: ignoring request to remove libb-hooks-op-check-perl which isn't installed dpkg: warning: ignoring request to remove libmodule-runtime-perl which isn't installed dpkg: warning: ignoring request to remove libsub-name-perl which isn't installed dpkg: warning: ignoring request to remove perl-modules-5.28 which isn't installed dpkg: warning: ignoring request to remove libtry-tiny-perl which isn't installed dpkg: warning: ignoring request to remove libkeyword-simple-perl which isn't installed dpkg: warning: ignoring request to remove libmodule-implementation-perl which isn't installed dpkg: warning: ignoring request to remove libvariable-magic-perl which isn't installed dpkg: warning: ignoring request to remove libpackage-stash-perl which isn't installed dpkg: warning: ignoring request to remove libdevel-callchecker-perl which isn't installed 0m19.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', 'libb-hooks-endofscope-perl', 'libsub-exporter-progressive-perl', 'libgdbm-compat4:amd64', 'libpackage-stash-xs-perl', 'libgdbm6:amd64', 'libnamespace-clean-perl', 'perl', 'libsub-identify-perl', 'libperl5.28:amd64', 'netbase', 'libparams-classify-perl', 'libdynaloader-functions-perl', 'libb-hooks-op-check-perl', 'libmodule-runtime-perl', 'libsub-name-perl', 'perl-modules-5.28', 'libtry-tiny-perl', 'libkeyword-simple-perl', 'libmodule-implementation-perl', 'libvariable-magic-perl', 'libpackage-stash-perl', 'libdevel-callchecker-perl'] 0m19.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', 'libperlx-define-perl'] 0m19.3s DUMP: dpkg: warning: ignoring request to remove libperlx-define-perl which isn't installed 0m19.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', 'libperlx-define-perl'] 0m19.3s INFO: Running scripts post_purge 0m19.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_purge_exceptions'] 0m19.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_purge_exceptions'] 0m19.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', '--pending'] 0m19.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--purge', '--pending'] 0m19.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--remove', '--pending'] 0m19.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg', '--remove', '--pending'] 0m19.4s INFO: Running scripts post_test 0m19.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_test_exceptions'] 0m19.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'tmp/scripts/post_test_exceptions'] 0m19.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m20.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m20.5s DEBUG: No broken symlinks as far as we can find. 0m20.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-divert', '--list'] 0m20.5s DUMP: local diversion of /bin/sync to /bin/sync.distrib diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /home to /home.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m20.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'dpkg-divert', '--list'] 0m20.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'clean'] 0m20.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRnI9gV', 'apt-get', 'clean'] 0m20.5s DEBUG: Recording chroot state 0m21.2s INFO: PASS: Installation and purging test. 0m21.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/shm'] 0m21.6s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/shm'] 0m21.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/console'] 0m21.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/console'] 0m21.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/ptmx'] 0m21.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/ptmx'] 0m21.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts'] 0m21.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/dev/pts'] 0m21.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/proc'] 0m21.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpRnI9gV/proc'] 0m21.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m21.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpRnI9gV'] 0m21.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpRnI9gV 0m21.9s INFO: PASS: All tests. 0m21.9s INFO: piuparts run ends. ret=0 End: 2019-08-10 11:57:00 UTC