Start: 2026-06-06 21:27:48 GMT Package: perl Version: 5.42.2-2 Installed-Size: 836 Maintainer: Niko Tyni Architecture: amd64 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.04), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.213), libcompress-raw-zlib-perl (= 2.222), libcompress-zlib-perl (= 2.213), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.020), libdigest-md5-perl (= 2.59), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.035), libextutils-cbuilder-perl (= 0.280242), libextutils-command-perl (= 7.76), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.570000), libfile-spec-perl (= 3.9400), libhttp-tiny-perl (= 0.090), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.213), libio-compress-bzip2-perl (= 2.213), libio-compress-perl (= 2.213), libio-compress-zlib-perl (= 2.213), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.005002), libmath-complex-perl (= 1.6300), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20260329.42), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.244), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.37), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.024), libtest-harness-perl (= 3.50), libtest-simple-perl (= 1.302210), libtest-tester-perl (= 1.302210), libtest-use-ok-perl (= 1.302210), libtest2-suite-perl (= 1.302210), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.43), libthreads-shared-perl (= 1.70), libtime-hires-perl (= 1.9778), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3600), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9933), libversion-requirements-perl, podlators-perl (= 6.0.2) Depends: perl-base (= 5.42.2-2), perl-modules-5.42 (>= 5.42.2-2), libperl5.42 (= 5.42.2-2) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Conflicts: libjson-pp-perl (<< 2.27200-2) Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.42.2-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Description: Larry Wall's Practical Extraction and Report Language Multi-Arch: allowed Homepage: https://dev.perl.org/perl5/ Description-md5: 603cb1e5fe66da8106c364f4e9b84082 Build-Essential: yes Tag: devel::interpreter, devel::lang:perl, devel::library, implemented-in::c, implemented-in::perl, interface::commandline, role::devel-lib, role::metapackage, role::program Section: perl Priority: standard Filename: pool/main/p/perl/perl_5.42.2-2_amd64.deb Size: 265360 MD5sum: bcd23729e067356cc8145597dcd50fcd SHA256: 9c277f6afcab31f9d7bca9c24663cd34740ffe4ed3bd5878cd60ac397d3608fa Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/bin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d experimental --no-upgrade-test --apt perl=5.42.2-2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.6.1~202508211944~1.6.0-10-gffba2cce starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/bin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d experimental --no-upgrade-test --apt perl=5.42.2-2 0m0.0s INFO: Running on: Linux piu-slave-conova-01 6.1.0-49-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.174-1 (2026-05-26) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpf0agdqft 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpf0agdqft 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz'] 0m0.3s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz'] 0m0.3s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/proc'] 0m0.3s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/proc'] 0m0.3s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts'] 0m0.3s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts'] 0m0.3s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/ptmx'] 0m0.3s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/ptmx'] 0m0.3s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/7', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/console'] 0m0.3s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/7', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/console'] 0m0.3s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/shm'] 0m0.3s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/shm'] 0m0.3s DEBUG: sources.list: deb http://deb.debian.org/debian/ sid main deb http://deb.debian.org/debian/ experimental main 0m0.3s DEBUG: Created policy-rc.d and chmodded it. 0m0.3s DEBUG: Created resolv.conf. 0m0.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpf0agdqft/tmp/scripts/ 0m0.3s INFO: Running scripts post_chroot_unpack 0m0.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'update'] 0m3.1s DUMP: Get:1 http://deb.debian.org/debian sid InRelease [189 kB] Get:2 http://deb.debian.org/debian experimental InRelease [91.7 kB] Get:3 http://deb.debian.org/debian sid/main amd64 Packages [10.5 MB] Get:4 http://deb.debian.org/debian sid/main Translation-en [7609 kB] Get:5 http://deb.debian.org/debian experimental/main amd64 Packages [430 kB] Get:6 http://deb.debian.org/debian experimental/main Translation-en [244 kB] Fetched 19.1 MB in 2s (9659 kB/s) Reading package lists... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'update'] 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-yf', 'dist-upgrade'] 0m5.0s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following packages will be upgraded: bsdutils libblkid1 libmount1 libsmartcols1 libsystemd0 libudev1 libuuid1 login mount perl-base util-linux 11 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 4442 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian sid/main amd64 perl-base amd64 5.40.1-8 [1677 kB] Get:2 http://deb.debian.org/debian sid/main amd64 libuuid1 amd64 2.42.1-2 [33.3 kB] Get:3 http://deb.debian.org/debian sid/main amd64 libblkid1 amd64 2.42.1-2 [172 kB] Get:4 http://deb.debian.org/debian sid/main amd64 libmount1 amd64 2.42.1-2 [213 kB] Get:5 http://deb.debian.org/debian sid/main amd64 libsmartcols1 amd64 2.42.1-2 [144 kB] Get:6 http://deb.debian.org/debian sid/main amd64 util-linux amd64 2.42.1-2 [1225 kB] Get:7 http://deb.debian.org/debian sid/main amd64 mount amd64 2.42.1-2 [164 kB] Get:8 http://deb.debian.org/debian sid/main amd64 libsystemd0 amd64 261~rc3-1 [467 kB] Get:9 http://deb.debian.org/debian sid/main amd64 login amd64 1:4.16.0-2+really2.42.1-2 [118 kB] Get:10 http://deb.debian.org/debian sid/main amd64 libudev1 amd64 261~rc3-1 [138 kB] Get:11 http://deb.debian.org/debian sid/main amd64 bsdutils amd64 1:2.42.1-2 [90.7 kB] Fetched 4442 kB in 0s (54.6 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4919 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-8_amd64.deb ... Unpacking perl-base (5.40.1-8) over (5.40.1-7+b1) ... Setting up perl-base (5.40.1-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../libuuid1_2.42.1-2_amd64.deb ... Unpacking libuuid1:amd64 (2.42.1-2) over (2.42.1-1) ... Setting up libuuid1:amd64 (2.42.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../libblkid1_2.42.1-2_amd64.deb ... Unpacking libblkid1:amd64 (2.42.1-2) over (2.42.1-1) ... Setting up libblkid1:amd64 (2.42.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../libmount1_2.42.1-2_amd64.deb ... Unpacking libmount1:amd64 (2.42.1-2) over (2.42.1-1) ... Setting up libmount1:amd64 (2.42.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.42.1-2_amd64.deb ... Unpacking libsmartcols1:amd64 (2.42.1-2) over (2.42.1-1) ... Setting up libsmartcols1:amd64 (2.42.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../util-linux_2.42.1-2_amd64.deb ... Unpacking util-linux (2.42.1-2) over (2.42.1-1) ... Setting up util-linux (2.42.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../mount_2.42.1-2_amd64.deb ... Unpacking mount (2.42.1-2) over (2.42.1-1) ... Preparing to unpack .../libsystemd0_261~rc3-1_amd64.deb ... Unpacking libsystemd0:amd64 (261~rc3-1) over (261~rc2-1) ... Setting up libsystemd0:amd64 (261~rc3-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../login_1%3a4.16.0-2+really2.42.1-2_amd64.deb ... Unpacking login (1:4.16.0-2+really2.42.1-2) over (1:4.16.0-2+really2.42.1-1) ... Preparing to unpack .../libudev1_261~rc3-1_amd64.deb ... Unpacking libudev1:amd64 (261~rc3-1) over (261~rc2-1) ... Setting up libudev1:amd64 (261~rc3-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4918 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.42.1-2_amd64.deb ... Unpacking bsdutils (1:2.42.1-2) over (1:2.42.1-1) ... Setting up bsdutils (1:2.42.1-2) ... Setting up mount (2.42.1-2) ... Setting up login (1:4.16.0-2+really2.42.1-2) ... Processing triggers for libc-bin (2.42-16) ... 0m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-yf', 'dist-upgrade'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m5.8s DUMP: d4c3770d39eb6c265424cbdce1a1ee07 - 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m5.8s INFO: Running scripts post_setup 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_dummy_users'] 0m6.4s DUMP: useradd warning: dummy1000's uid 1000 is greater than SYS_UID_MAX 999 useradd warning: dummy1001's uid 1001 is greater than SYS_UID_MAX 999 useradd warning: dummy1002's uid 1002 is greater than SYS_UID_MAX 999 useradd warning: dummy1003's uid 1003 is greater than SYS_UID_MAX 999 useradd warning: dummy1004's uid 1004 is greater than SYS_UID_MAX 999 useradd warning: dummy1005's uid 1005 is greater than SYS_UID_MAX 999 useradd warning: dummy1006's uid 1006 is greater than SYS_UID_MAX 999 useradd warning: dummy1007's uid 1007 is greater than SYS_UID_MAX 999 useradd warning: dummy1008's uid 1008 is greater than SYS_UID_MAX 999 useradd warning: dummy1009's uid 1009 is greater than SYS_UID_MAX 999 useradd warning: dummy1010's uid 1010 is greater than SYS_UID_MAX 999 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_dummy_users'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_forbid_home'] 0m6.4s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_forbid_home'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /usr/bin/sync to /usr/bin/sync.distrib' Adding 'local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged' '/bin/sync' -> 'true' 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_minimize'] 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_minimize'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_zz_backports'] 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_setup_zz_backports'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'clean'] 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'clean'] 0m6.5s DEBUG: Recording chroot state 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m6.9s DUMP: install ok installed apt apt 3.3.1 install ok installed base-files base-files 14.2 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-3 install ok installed bsdutils bsdutils 1:2.42.1-2 install ok installed coreutils coreutils 9.10-1 install ok installed dash dash 0.5.12-12 install ok installed debconf debconf 1.5.92 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dpkg dpkg 1.23.7 install ok installed findutils findutils 4.10.0-4 install ok installed gcc-16-base:amd64 gcc-16-base 16.1.0-1 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.3.1 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.42.1-2 install ok installed libbsd0:amd64 libbsd0 0.12.2-3 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b2 install ok installed libc-bin libc-bin 2.42-16 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-16 install ok installed libc6:amd64 libc6 2.42-16 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.3-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1+b1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11+b1 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.283 install ok installed libgcc-s1:amd64 libgcc-s1 16.1.0-1 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b2 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-10 install ok installed liblzma5:amd64 liblzma5 5.8.3-1 install ok installed libmd0:amd64 libmd0 1.2.0-2 install ok installed libmount1:amd64 libmount1 2.42.1-2 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1+b1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b2 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b2 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b2 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b2 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.10-1 install ok installed libsemanage-common libsemanage-common 3.10-1 install ok installed libsemanage2:amd64 libsemanage2 3.10-1 install ok installed libsepol2:amd64 libsepol2 3.10-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.42.1-2 install ok installed libssl3t64:amd64 libssl3t64 3.6.2-1 install ok installed libstdc++6:amd64 libstdc++6 16.1.0-1 install ok installed libsystemd0:amd64 libsystemd0 261~rc3-1 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1+b1 install ok installed libudev1:amd64 libudev1 261~rc3-1 install ok installed libuuid1:amd64 libuuid1 2.42.1-2 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b2 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b2 install ok installed login login 1:4.16.0-2+really2.42.1-2 install ok installed login.defs login.defs 1:4.19.3-2 install ok installed mawk mawk 1.3.4.20260302-1 install ok installed mount mount 2.42.1-2 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1+b1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.6.2-1 install ok installed passwd passwd 1:4.19.3-2 install ok installed perl-base perl-base 5.40.1-8 install ok installed sed sed 4.9-3 install ok installed sqv sqv 1.3.0-5+b2 install ok installed sysvinit-utils sysvinit-utils 3.18-1 install ok installed tar tar 1.35+dfsg-4 install ok installed tzdata tzdata 2026b-1 install ok installed util-linux util-linux 2.42.1-2 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.2-3 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-divert', '--list'] 0m6.9s DUMP: local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-divert', '--list'] 0m6.9s INFO: Running scripts is_testable 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/is_testable_uninstallable'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/is_testable_uninstallable'] 0m6.9s INFO: apt-cache does not know about any of the requested packages 0m6.9s INFO: Running scripts pre_test 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_test_exceptions'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_test_exceptions'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_test_root_password'] 0m7.0s DUMP: New password: Retype new password: passwd: password updated successfully 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_test_root_password'] 0m7.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m7.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m7.5s DEBUG: No broken symlinks as far as we can find. 0m7.5s INFO: Running scripts pre_install 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_database-server'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_database-server'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_exceptions'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_exceptions'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_extras'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_extras'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_foreign_architecture'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_foreign_architecture'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m7.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m8.1s DEBUG: No broken symlinks as far as we can find. 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-cache', 'policy'] 0m9.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 1 http://deb.debian.org/debian experimental/main amd64 Packages release o=Debian,a=experimental,n=rc-buggy,l=Debian,c=main,b=amd64 origin deb.debian.org 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-cache', 'policy'] 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-cache', 'policy', 'perl'] 0m9.4s DUMP: perl: Installed: (none) Candidate: 5.40.1-8 Version table: 5.42.2-2 1 1 http://deb.debian.org/debian experimental/main amd64 Packages 5.40.1-8 500 500 http://deb.debian.org/debian sid/main amd64 Packages 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-cache', 'policy', 'perl'] 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl=5.42.2-2'] 0m11.4s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: libgdbm-compat4t64 libgdbm6t64 libperl5.42 perl-base perl-modules-5.42 Suggested packages: gdbm-l10n sensible-utils perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libtap-harness-archive-perl Recommended packages: netbase The following NEW packages will be installed: libgdbm-compat4t64 libgdbm6t64 libperl5.42 perl perl-modules-5.42 The following packages will be upgraded: perl-base 1 upgraded, 5 newly installed, 0 to remove and 7 not upgraded. Need to get 9720 kB of archives. After this operation, 51.1 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian experimental/main amd64 perl-base amd64 5.42.2-2 [1853 kB] Get:2 http://deb.debian.org/debian experimental/main amd64 perl-modules-5.42 all 5.42.2-2 [3212 kB] Get:3 http://deb.debian.org/debian sid/main amd64 libgdbm6t64 amd64 1.26-1+b2 [77.7 kB] Get:4 http://deb.debian.org/debian sid/main amd64 libgdbm-compat4t64 amd64 1.26-1+b2 [52.0 kB] Get:5 http://deb.debian.org/debian experimental/main amd64 libperl5.42 amd64 5.42.2-2 [4260 kB] Get:6 http://deb.debian.org/debian experimental/main amd64 perl amd64 5.42.2-2 [265 kB] Fetched 9720 kB in 0s (75.7 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../perl-base_5.42.2-2_amd64.deb ... Unpacking perl-base (5.42.2-2) over (5.40.1-8) ... Setting up perl-base (5.42.2-2) ... Selecting previously unselected package perl-modules-5.42. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4983 files and directories currently installed.) Preparing to unpack .../perl-modules-5.42_5.42.2-2_all.deb ... Unpacking perl-modules-5.42 (5.42.2-2) ... Selecting previously unselected package libgdbm6t64:amd64. Preparing to unpack .../libgdbm6t64_1.26-1+b2_amd64.deb ... Unpacking libgdbm6t64:amd64 (1.26-1+b2) ... Selecting previously unselected package libgdbm-compat4t64:amd64. Preparing to unpack .../libgdbm-compat4t64_1.26-1+b2_amd64.deb ... Unpacking libgdbm-compat4t64:amd64 (1.26-1+b2) ... Selecting previously unselected package libperl5.42:amd64. Preparing to unpack .../libperl5.42_5.42.2-2_amd64.deb ... Unpacking libperl5.42:amd64 (5.42.2-2) ... Selecting previously unselected package perl. Preparing to unpack .../perl_5.42.2-2_amd64.deb ... Unpacking perl (5.42.2-2) ... Setting up libgdbm6t64:amd64 (1.26-1+b2) ... Setting up libgdbm-compat4t64:amd64 (1.26-1+b2) ... Setting up perl-modules-5.42 (5.42.2-2) ... Setting up libperl5.42:amd64 (5.42.2-2) ... Setting up perl (5.42.2-2) ... Processing triggers for libc-bin (2.42-16) ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl=5.42.2-2'] 0m11.4s INFO: Running scripts post_install 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_install_exceptions'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_install_exceptions'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'systemd-tmpfiles', '--cat-config'] 0m11.5s DUMP: chroot: failed to run command 'systemd-tmpfiles': No such file or directory 0m11.5s DEBUG: Command failed (status=127), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'systemd-tmpfiles', '--cat-config'] 0m11.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m11.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m12.3s DEBUG: No broken symlinks as far as we can find. 0m12.5s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', '-ac', '--ignore-obsolete'] 0m13.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', '-ac', '--ignore-obsolete'] 0m13.3s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.3s DUMP: 0.15.9~deb12u1 0m13.3s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.3s INFO: Running adequate version 0.15.9~deb12u1 now. 0m13.3s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'perl'] 0m13.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'perl'] 0m13.5s INFO: Running scripts pre_remove 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m14.0s DUMP: install ok installed apt apt 3.3.1 install ok installed base-files base-files 14.2 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-3 install ok installed bsdutils bsdutils 1:2.42.1-2 install ok installed coreutils coreutils 9.10-1 install ok installed dash dash 0.5.12-12 install ok installed debconf debconf 1.5.92 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dpkg dpkg 1.23.7 install ok installed findutils findutils 4.10.0-4 install ok installed gcc-16-base:amd64 gcc-16-base 16.1.0-1 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.3.1 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.42.1-2 install ok installed libbsd0:amd64 libbsd0 0.12.2-3 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b2 install ok installed libc-bin libc-bin 2.42-16 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-16 install ok installed libc6:amd64 libc6 2.42-16 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.3-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1+b1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11+b1 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.283 install ok installed libgcc-s1:amd64 libgcc-s1 16.1.0-1 install ok installed libgdbm-compat4t64:amd64 libgdbm-compat4t64 1.26-1+b2 install ok installed libgdbm6t64:amd64 libgdbm6t64 1.26-1+b2 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b2 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-10 install ok installed liblzma5:amd64 liblzma5 5.8.3-1 install ok installed libmd0:amd64 libmd0 1.2.0-2 install ok installed libmount1:amd64 libmount1 2.42.1-2 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1+b1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b2 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b2 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b2 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b2 install ok installed libperl5.42:amd64 libperl5.42 5.42.2-2 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.10-1 install ok installed libsemanage-common libsemanage-common 3.10-1 install ok installed libsemanage2:amd64 libsemanage2 3.10-1 install ok installed libsepol2:amd64 libsepol2 3.10-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.42.1-2 install ok installed libssl3t64:amd64 libssl3t64 3.6.2-1 install ok installed libstdc++6:amd64 libstdc++6 16.1.0-1 install ok installed libsystemd0:amd64 libsystemd0 261~rc3-1 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1+b1 install ok installed libudev1:amd64 libudev1 261~rc3-1 install ok installed libuuid1:amd64 libuuid1 2.42.1-2 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b2 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b2 install ok installed login login 1:4.16.0-2+really2.42.1-2 install ok installed login.defs login.defs 1:4.19.3-2 install ok installed mawk mawk 1.3.4.20260302-1 install ok installed mount mount 2.42.1-2 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1+b1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.6.2-1 install ok installed passwd passwd 1:4.19.3-2 install ok installed perl perl 5.42.2-2 install ok installed perl-base perl-base 5.42.2-2 install ok installed perl-modules-5.42 perl-modules-5.42 5.42.2-2 install ok installed sed sed 4.9-3 install ok installed sqv sqv 1.3.0-5+b2 install ok installed sysvinit-utils sysvinit-utils 3.18-1 install ok installed tar tar 1.35+dfsg-4 install ok installed tzdata tzdata 2026b-1 install ok installed util-linux util-linux 2.42.1-2 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.2-3 0m14.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m14.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'perl-base=5.40.1-8', 'libgdbm-compat4t64:amd64-', 'libgdbm6t64:amd64-', 'libperl5.42:amd64-', 'perl-modules-5.42-', 'perl-'] 0m15.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following packages will be REMOVED: libgdbm-compat4t64 libgdbm6t64 libperl5.42 perl perl-modules-5.42 The following packages will be DOWNGRADED: perl-base 0 upgraded, 0 newly installed, 1 downgraded, 5 to remove and 0 not upgraded. Need to get 1677 kB of archives. After this operation, 51.1 MB disk space will be freed. Get:1 http://deb.debian.org/debian sid/main amd64 perl-base amd64 5.40.1-8 [1677 kB] Fetched 1677 kB in 0s (36.0 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 7217 files and directories currently installed.) Removing perl (5.42.2-2) ... Removing libperl5.42:amd64 (5.42.2-2) ... Removing perl-modules-5.42 (5.42.2-2) ... dpkg: warning: downgrading perl-base (5.42.2-2) to (5.40.1-8) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5002 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-8_amd64.deb ... Unpacking perl-base (5.40.1-8) over (5.42.2-2) ... Setting up perl-base (5.40.1-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4941 files and directories currently installed.) Removing libgdbm-compat4t64:amd64 (1.26-1+b2) ... Removing libgdbm6t64:amd64 (1.26-1+b2) ... Processing triggers for libc-bin (2.42-16) ... W: --force-yes is deprecated, use one of the options starting with --allow instead. 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'perl-base=5.40.1-8', 'libgdbm-compat4t64:amd64-', 'libgdbm6t64:amd64-', 'libperl5.42:amd64-', 'perl-modules-5.42-', 'perl-'] 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '--no-install-recommends', '--reinstall', 'install', 'perl-base=5.40.1-8'] 0m16.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/1677 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4925 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-8_amd64.deb ... Unpacking perl-base (5.40.1-8) over (5.40.1-8) ... Setting up perl-base (5.40.1-8) ... 0m16.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', '-y', '--no-install-recommends', '--reinstall', 'install', 'perl-base=5.40.1-8'] 0m16.3s INFO: Running scripts post_remove 0m16.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_remove_exceptions'] 0m16.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_remove_exceptions'] 0m16.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libperl5.42:amd64', 'perl-modules-5.42'] 0m16.3s DUMP: dpkg: warning: ignoring request to remove libgdbm-compat4t64 which is not installed dpkg: warning: ignoring request to remove libgdbm6t64 which is not installed dpkg: warning: ignoring request to remove libperl5.42 which is not installed dpkg: warning: ignoring request to remove perl-modules-5.42 which is not installed 0m16.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libperl5.42:amd64', 'perl-modules-5.42'] 0m16.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', 'perl'] 0m16.4s DUMP: (Reading database ... 4925 files and directories currently installed.) Purging configuration files for perl (5.42.2-2) ... 0m16.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', 'perl'] 0m16.4s INFO: Running scripts post_purge 0m16.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_purge_exceptions'] 0m16.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_purge_exceptions'] 0m16.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', '--pending'] 0m16.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--purge', '--pending'] 0m16.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--remove', '--pending'] 0m16.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg', '--remove', '--pending'] 0m16.4s INFO: Running scripts post_test 0m16.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_test_exceptions'] 0m16.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'tmp/scripts/post_test_exceptions'] 0m16.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m16.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m16.9s DEBUG: No broken symlinks as far as we can find. 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-divert', '--list'] 0m16.9s DUMP: local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'dpkg-divert', '--list'] 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'clean'] 0m17.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpf0agdqft', 'apt-get', 'clean'] 0m17.0s DEBUG: Recording chroot state 0m17.5s INFO: PASS: Installation and purging test. 0m17.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/shm'] 0m17.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/shm'] 0m17.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/console'] 0m17.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/console'] 0m17.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/ptmx'] 0m17.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/ptmx'] 0m17.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts'] 0m17.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/dev/pts'] 0m17.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/proc'] 0m18.0s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpf0agdqft/proc'] 0m18.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m18.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpf0agdqft'] 0m18.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpf0agdqft 0m18.1s INFO: PASS: All tests. 0m18.1s INFO: piuparts run ends. ret=0 End: 2026-06-06 21:28:06 GMT