Start: 2026-02-23 10:42:26 GMT Package: brz Source: breezy Version: 3.3.21-1 Installed-Size: 613 Maintainer: Debian Breezy Maintainers Architecture: amd64 Provides: bzr, bzr-email, bzr-fastimport, bzr-git, bzr-stats, bzr-upload, git-remote-bzr Depends: python3, python3-breezy (<= 3.3.21-1.1~), python3-breezy (>= 3.3.21-1), libc6 (>= 2.34), libgcc-s1 (>= 4.2), libpython3.13 (>= 3.13.0~rc3) Recommends: python3-dulwich (<< 2), python3-dulwich (>= 0.25.0), python3-gpg Suggests: brz-doc, python3-breezy.tests, python3-fastimport (>= 0.9.8) Conflicts: bzr (<< 2.7.0+bzr6622-1), bzr-git (<< 0.6.13+bzr1650+brz1), git-remote-bzr Description: easy to use distributed version control system Homepage: https://www.breezy-vcs.org/ Description-md5: 4daa260c32bc7524a58f92196d3808bc Section: vcs Priority: optional Filename: pool/main/b/breezy/brz_3.3.21-1_amd64.deb Size: 236336 MD5sum: 0fbea3d82f547a725498adc689a93c56 SHA256: 54e3b6ff140629eee9278284637de9453fb17f45333cb12bdb8da8b7dda02747 Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/bin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/forky-merged-usr_amd64.tar.gz -d forky --no-upgrade-test --apt brz=3.3.21-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.6.1~202508211856~1.6.0-10-gffba2cce starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/bin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/forky-merged-usr_amd64.tar.gz -d forky --no-upgrade-test --apt brz=3.3.21-1 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 6.1.0-43-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.162-1 (2026-02-08) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpmf9y4eje 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/forky-merged-usr_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpmf9y4eje 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/forky-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/forky-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/proc'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/proc'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts'] 0m0.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/ptmx'] 0m0.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/ptmx'] 0m0.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/console'] 0m0.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/console'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/shm'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/shm'] 0m0.4s DEBUG: sources.list: deb http://deb.debian.org/debian/ forky main 0m0.4s DEBUG: Created policy-rc.d and chmodded it. 0m0.4s DEBUG: Created resolv.conf. 0m0.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpmf9y4eje/tmp/scripts/ 0m0.4s INFO: Running scripts post_chroot_unpack 0m0.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'update'] 0m3.3s DUMP: Get:1 http://deb.debian.org/debian forky InRelease [137 kB] Get:2 http://deb.debian.org/debian forky/main amd64 Packages [9545 kB] Get:3 http://deb.debian.org/debian forky/main Translation-en [6402 kB] Fetched 16.1 MB in 2s (7872 kB/s) Reading package lists... 0m3.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'update'] 0m3.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', '-yf', 'dist-upgrade'] 0m12.3s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following NEW packages will be installed: gcc-15-base libc-gconv-modules-extra util-linux-extra The following packages will be upgraded: apt base-files base-passwd bash bsdutils diffutils dpkg gcc-14-base grep init-system-helpers libacl1 libapt-pkg7.0 libattr1 libaudit-common libaudit1 libblkid1 libbsd0 libbz2-1.0 libc-bin libc6 libcap-ng0 libcap2 libcrypt1 libdb5.3t64 libdebconfclient0 libgcc-s1 libgmp10 libhogweed6t64 liblastlog2-2 liblz4-1 liblzma5 libmd0 libmount1 libnettle8t64 libpam-modules libpam-modules-bin libpam0g libpcre2-8-0 libseccomp2 libselinux1 libsemanage-common libsemanage2 libsepol2 libsmartcols1 libsqlite3-0 libssl3t64 libstdc++6 libsystemd0 libtinfo6 libudev1 libuuid1 libxxhash0 libzstd1 login login.defs mawk mount ncurses-base ncurses-bin openssl-provider-legacy passwd perl-base sqv sysvinit-utils tzdata util-linux zlib1g 67 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 27.9 MB of archives. After this operation, 2479 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian forky/main amd64 libc-gconv-modules-extra amd64 2.42-13 [1123 kB] Get:2 http://deb.debian.org/debian forky/main amd64 libc6 amd64 2.42-13 [1814 kB] Get:3 http://deb.debian.org/debian forky/main amd64 libc-bin amd64 2.42-13 [644 kB] Get:4 http://deb.debian.org/debian forky/main amd64 gcc-15-base amd64 15.2.0-13 [54.8 kB] Get:5 http://deb.debian.org/debian forky/main amd64 libgcc-s1 amd64 15.2.0-13 [71.5 kB] Get:6 http://deb.debian.org/debian forky/main amd64 base-files amd64 14 [72.9 kB] Get:7 http://deb.debian.org/debian forky/main amd64 bash amd64 5.3-2 [1561 kB] Get:8 http://deb.debian.org/debian forky/main amd64 diffutils amd64 1:3.12-1 [405 kB] Get:9 http://deb.debian.org/debian forky/main amd64 libbz2-1.0 amd64 1.0.8-6+b1 [40.4 kB] Get:10 http://deb.debian.org/debian forky/main amd64 libxxhash0 amd64 0.8.3-2+b1 [28.1 kB] Get:11 http://deb.debian.org/debian forky/main amd64 liblz4-1 amd64 1.10.0-6 [70.5 kB] Get:12 http://deb.debian.org/debian forky/main amd64 liblzma5 amd64 5.8.2-2 [327 kB] Get:13 http://deb.debian.org/debian forky/main amd64 openssl-provider-legacy amd64 3.5.5-1 [311 kB] Get:14 http://deb.debian.org/debian forky/main amd64 libzstd1 amd64 1.5.7+dfsg-3+b1 [308 kB] Get:15 http://deb.debian.org/debian forky/main amd64 zlib1g amd64 1:1.3.dfsg+really1.3.1-3 [89.0 kB] Get:16 http://deb.debian.org/debian forky/main amd64 libssl3t64 amd64 3.5.5-1 [2449 kB] Get:17 http://deb.debian.org/debian forky/main amd64 libstdc++6 amd64 15.2.0-13 [737 kB] Get:18 http://deb.debian.org/debian forky/main amd64 libsystemd0 amd64 259.1-1 [471 kB] Get:19 http://deb.debian.org/debian forky/main amd64 libudev1 amd64 259.1-1 [158 kB] Get:20 http://deb.debian.org/debian forky/main amd64 libapt-pkg7.0 amd64 3.1.16 [1235 kB] Get:21 http://deb.debian.org/debian forky/main amd64 dpkg amd64 1.23.5 [1527 kB] Get:22 http://deb.debian.org/debian forky/main amd64 grep amd64 3.12-1 [443 kB] Get:23 http://deb.debian.org/debian forky/main amd64 libtinfo6 amd64 6.6+20251231-1 [354 kB] Get:24 http://deb.debian.org/debian forky/main amd64 ncurses-bin amd64 6.6+20251231-1 [445 kB] Get:25 http://deb.debian.org/debian forky/main amd64 perl-base amd64 5.40.1-7 [1679 kB] Get:26 http://deb.debian.org/debian forky/main amd64 libuuid1 amd64 2.41.3-3 [39.0 kB] Get:27 http://deb.debian.org/debian forky/main amd64 bsdutils amd64 1:2.41.3-3 [94.3 kB] Get:28 http://deb.debian.org/debian forky/main amd64 libblkid1 amd64 2.41.3-3 [174 kB] Get:29 http://deb.debian.org/debian forky/main amd64 libmount1 amd64 2.41.3-3 [212 kB] Get:30 http://deb.debian.org/debian forky/main amd64 libsmartcols1 amd64 2.41.3-3 [145 kB] Get:31 http://deb.debian.org/debian forky/main amd64 util-linux amd64 2.41.3-3 [1167 kB] Get:32 http://deb.debian.org/debian forky/main amd64 mount amd64 2.41.3-3 [164 kB] Get:33 http://deb.debian.org/debian forky/main amd64 libpcre2-8-0 amd64 10.46-1+b1 [298 kB] Get:34 http://deb.debian.org/debian forky/main amd64 libselinux1 amd64 3.9-4+b1 [86.1 kB] Get:35 http://deb.debian.org/debian forky/main amd64 libdebconfclient0 amd64 0.282+b2 [11.2 kB] Get:36 http://deb.debian.org/debian forky/main amd64 base-passwd amd64 3.6.8 [54.6 kB] Get:37 http://deb.debian.org/debian forky/main amd64 libgmp10 amd64 2:6.3.0+dfsg-5+b1 [561 kB] Get:38 http://deb.debian.org/debian forky/main amd64 libnettle8t64 amd64 3.10.2-1 [307 kB] Get:39 http://deb.debian.org/debian forky/main amd64 libhogweed6t64 amd64 3.10.2-1 [336 kB] Get:40 http://deb.debian.org/debian forky/main amd64 sqv amd64 1.3.0-5 [648 kB] Get:41 http://deb.debian.org/debian forky/main amd64 libseccomp2 amd64 2.6.0-2+b1 [52.2 kB] Get:42 http://deb.debian.org/debian forky/main amd64 apt amd64 3.1.16 [1529 kB] Get:43 http://deb.debian.org/debian forky/main amd64 init-system-helpers all 1.69 [39.3 kB] Get:44 http://deb.debian.org/debian forky/main amd64 ncurses-base all 6.6+20251231-1 [277 kB] Get:45 http://deb.debian.org/debian forky/main amd64 sysvinit-utils amd64 3.15-6 [35.0 kB] Get:46 http://deb.debian.org/debian forky/main amd64 libaudit-common all 1:4.1.2-1 [14.3 kB] Get:47 http://deb.debian.org/debian forky/main amd64 libcap-ng0 amd64 0.9.1-1 [17.4 kB] Get:48 http://deb.debian.org/debian forky/main amd64 libaudit1 amd64 1:4.1.2-1+b1 [60.2 kB] Get:49 http://deb.debian.org/debian forky/main amd64 libcrypt1 amd64 1:4.5.1-1 [98.0 kB] Get:50 http://deb.debian.org/debian forky/main amd64 libpam0g amd64 1.7.0-5+b1 [70.4 kB] Get:51 http://deb.debian.org/debian forky/main amd64 libpam-modules-bin amd64 1.7.0-5+b1 [49.8 kB] Get:52 http://deb.debian.org/debian forky/main amd64 libpam-modules amd64 1.7.0-5+b1 [179 kB] Get:53 http://deb.debian.org/debian forky/main amd64 login amd64 1:4.16.0-2+really2.41.3-3 [106 kB] Get:54 http://deb.debian.org/debian forky/main amd64 libacl1 amd64 2.3.2-3 [32.7 kB] Get:55 http://deb.debian.org/debian forky/main amd64 libattr1 amd64 1:2.5.2-4 [23.0 kB] Get:56 http://deb.debian.org/debian forky/main amd64 libcap2 amd64 1:2.75-10+b5 [28.8 kB] Get:57 http://deb.debian.org/debian forky/main amd64 libdb5.3t64 amd64 5.3.28+dfsg2-11 [710 kB] Get:58 http://deb.debian.org/debian forky/main amd64 libsqlite3-0 amd64 3.46.1-9 [920 kB] Get:59 http://deb.debian.org/debian forky/main amd64 liblastlog2-2 amd64 2.41.3-3 [29.8 kB] Get:60 http://deb.debian.org/debian forky/main amd64 libmd0 amd64 1.1.0-2+b2 [36.2 kB] Get:61 http://deb.debian.org/debian forky/main amd64 login.defs all 1:4.18.0-2 [211 kB] Get:62 http://deb.debian.org/debian forky/main amd64 mawk amd64 1.3.4.20260129-1 [143 kB] Get:63 http://deb.debian.org/debian forky/main amd64 libbsd0 amd64 0.12.2-2+b1 [132 kB] Get:64 http://deb.debian.org/debian forky/main amd64 libsemanage-common all 3.9-1 [7888 B] Get:65 http://deb.debian.org/debian forky/main amd64 libsepol2 amd64 3.9-2 [300 kB] Get:66 http://deb.debian.org/debian forky/main amd64 libsemanage2 amd64 3.9-1+b1 [96.9 kB] Get:67 http://deb.debian.org/debian forky/main amd64 passwd amd64 1:4.18.0-2 [1286 kB] Get:68 http://deb.debian.org/debian forky/main amd64 tzdata all 2025c-3 [263 kB] Get:69 http://deb.debian.org/debian forky/main amd64 util-linux-extra amd64 2.41.3-3 [420 kB] Get:70 http://deb.debian.org/debian forky/main amd64 gcc-14-base amd64 14.3.0-12 [52.8 kB] Preconfiguring packages ... Fetched 27.9 MB in 1s (21.0 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4934 files and directories currently installed.) Preparing to unpack .../libc6_2.42-13_amd64.deb ... Unpacking libc6:amd64 (2.42-13) over (2.41-12) ... Selecting previously unselected package libc-gconv-modules-extra:amd64. Preparing to unpack .../libc-gconv-modules-extra_2.42-13_amd64.deb ... Unpacking libc-gconv-modules-extra:amd64 (2.42-13) ... Setting up libc-gconv-modules-extra:amd64 (2.42-13) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4939 files and directories currently installed.) Preparing to unpack .../libc-bin_2.42-13_amd64.deb ... Unpacking libc-bin (2.42-13) over (2.41-12) ... Setting up libc6:amd64 (2.42-13) ... Installing new version of config file /etc/ld.so.conf.d/x86_64-linux-gnu.conf ... Setting up libc-bin (2.42-13) ... Selecting previously unselected package gcc-15-base:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4939 files and directories currently installed.) Preparing to unpack .../gcc-15-base_15.2.0-13_amd64.deb ... Unpacking gcc-15-base:amd64 (15.2.0-13) ... Setting up gcc-15-base:amd64 (15.2.0-13) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4944 files and directories currently installed.) Preparing to unpack .../libgcc-s1_15.2.0-13_amd64.deb ... Unpacking libgcc-s1:amd64 (15.2.0-13) over (14.2.0-19) ... Setting up libgcc-s1:amd64 (15.2.0-13) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4944 files and directories currently installed.) Preparing to unpack .../base-files_14_amd64.deb ... Unpacking base-files (14) over (13.8) ... Setting up base-files (14) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4943 files and directories currently installed.) Preparing to unpack .../archives/bash_5.3-2_amd64.deb ... Unpacking bash (5.3-2) over (5.2.37-2+b5) ... Setting up bash (5.3-2) ... Installing new version of config file /etc/bash.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4944 files and directories currently installed.) Preparing to unpack .../diffutils_1%3a3.12-1_amd64.deb ... Unpacking diffutils (1:3.12-1) over (1:3.10-4) ... Setting up diffutils (1:3.12-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4944 files and directories currently installed.) Preparing to unpack .../libbz2-1.0_1.0.8-6+b1_amd64.deb ... Unpacking libbz2-1.0:amd64 (1.0.8-6+b1) over (1.0.8-6) ... Setting up libbz2-1.0:amd64 (1.0.8-6+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4945 files and directories currently installed.) Preparing to unpack .../libxxhash0_0.8.3-2+b1_amd64.deb ... Unpacking libxxhash0:amd64 (0.8.3-2+b1) over (0.8.3-2) ... Setting up libxxhash0:amd64 (0.8.3-2+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../liblz4-1_1.10.0-6_amd64.deb ... Unpacking liblz4-1:amd64 (1.10.0-6) over (1.10.0-4) ... Setting up liblz4-1:amd64 (1.10.0-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../liblzma5_5.8.2-2_amd64.deb ... Unpacking liblzma5:amd64 (5.8.2-2) over (5.8.1-1) ... Setting up liblzma5:amd64 (5.8.2-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../openssl-provider-legacy_3.5.5-1_amd64.deb ... Unpacking openssl-provider-legacy (3.5.5-1) over (3.5.1-1) ... Setting up openssl-provider-legacy (3.5.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libzstd1_1.5.7+dfsg-3+b1_amd64.deb ... Unpacking libzstd1:amd64 (1.5.7+dfsg-3+b1) over (1.5.7+dfsg-1) ... Setting up libzstd1:amd64 (1.5.7+dfsg-3+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../zlib1g_1%3a1.3.dfsg+really1.3.1-3_amd64.deb ... Unpacking zlib1g:amd64 (1:1.3.dfsg+really1.3.1-3) over (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up zlib1g:amd64 (1:1.3.dfsg+really1.3.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libssl3t64_3.5.5-1_amd64.deb ... Unpacking libssl3t64:amd64 (3.5.5-1) over (3.5.1-1) ... Setting up libssl3t64:amd64 (3.5.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libstdc++6_15.2.0-13_amd64.deb ... Unpacking libstdc++6:amd64 (15.2.0-13) over (14.2.0-19) ... Setting up libstdc++6:amd64 (15.2.0-13) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libsystemd0_259.1-1_amd64.deb ... Unpacking libsystemd0:amd64 (259.1-1) over (257.7-1) ... Setting up libsystemd0:amd64 (259.1-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libudev1_259.1-1_amd64.deb ... Unpacking libudev1:amd64 (259.1-1) over (257.7-1) ... Setting up libudev1:amd64 (259.1-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4946 files and directories currently installed.) Preparing to unpack .../libapt-pkg7.0_3.1.16_amd64.deb ... Unpacking libapt-pkg7.0:amd64 (3.1.16) over (3.0.3) ... Setting up libapt-pkg7.0:amd64 (3.1.16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../archives/dpkg_1.23.5_amd64.deb ... Unpacking dpkg (1.23.5) over (1.22.21) ... Setting up dpkg (1.23.5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../archives/grep_3.12-1_amd64.deb ... Unpacking grep (3.12-1) over (3.11-4) ... Setting up grep (3.12-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../libtinfo6_6.6+20251231-1_amd64.deb ... Unpacking libtinfo6:amd64 (6.6+20251231-1) over (6.5+20250216-2) ... Setting up libtinfo6:amd64 (6.6+20251231-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../ncurses-bin_6.6+20251231-1_amd64.deb ... Unpacking ncurses-bin (6.6+20251231-1) over (6.5+20250216-2) ... Setting up ncurses-bin (6.6+20251231-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-7_amd64.deb ... Unpacking perl-base (5.40.1-7) over (5.40.1-6) ... Setting up perl-base (5.40.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../libuuid1_2.41.3-3_amd64.deb ... Unpacking libuuid1:amd64 (2.41.3-3) over (2.41-5) ... Setting up libuuid1:amd64 (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4950 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.41.3-3_amd64.deb ... Unpacking bsdutils (1:2.41.3-3) over (1:2.41-5) ... Setting up bsdutils (1:2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../libblkid1_2.41.3-3_amd64.deb ... Unpacking libblkid1:amd64 (2.41.3-3) over (2.41-5) ... Setting up libblkid1:amd64 (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../libmount1_2.41.3-3_amd64.deb ... Unpacking libmount1:amd64 (2.41.3-3) over (2.41-5) ... Setting up libmount1:amd64 (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.41.3-3_amd64.deb ... Unpacking libsmartcols1:amd64 (2.41.3-3) over (2.41-5) ... Setting up libsmartcols1:amd64 (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4947 files and directories currently installed.) Preparing to unpack .../util-linux_2.41.3-3_amd64.deb ... Unpacking util-linux (2.41.3-3) over (2.41-5) ... Setting up util-linux (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4919 files and directories currently installed.) Preparing to unpack .../mount_2.41.3-3_amd64.deb ... Unpacking mount (2.41.3-3) over (2.41-5) ... Preparing to unpack .../libpcre2-8-0_10.46-1+b1_amd64.deb ... Unpacking libpcre2-8-0:amd64 (10.46-1+b1) over (10.45-1) ... Setting up libpcre2-8-0:amd64 (10.46-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4920 files and directories currently installed.) Preparing to unpack .../libselinux1_3.9-4+b1_amd64.deb ... Unpacking libselinux1:amd64 (3.9-4+b1) over (3.8.1-1) ... Setting up libselinux1:amd64 (3.9-4+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4923 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.282+b2_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.282+b2) over (0.280) ... Setting up libdebconfclient0:amd64 (0.282+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4924 files and directories currently installed.) Preparing to unpack .../base-passwd_3.6.8_amd64.deb ... Unpacking base-passwd (3.6.8) over (3.6.7) ... Setting up base-passwd (3.6.8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4924 files and directories currently installed.) Preparing to unpack .../libgmp10_2%3a6.3.0+dfsg-5+b1_amd64.deb ... Unpacking libgmp10:amd64 (2:6.3.0+dfsg-5+b1) over (2:6.3.0+dfsg-3) ... Setting up libgmp10:amd64 (2:6.3.0+dfsg-5+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4925 files and directories currently installed.) Preparing to unpack .../libnettle8t64_3.10.2-1_amd64.deb ... Unpacking libnettle8t64:amd64 (3.10.2-1) over (3.10.1-1) ... Setting up libnettle8t64:amd64 (3.10.2-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4925 files and directories currently installed.) Preparing to unpack .../libhogweed6t64_3.10.2-1_amd64.deb ... Unpacking libhogweed6t64:amd64 (3.10.2-1) over (3.10.1-1) ... Setting up libhogweed6t64:amd64 (3.10.2-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4925 files and directories currently installed.) Preparing to unpack .../archives/sqv_1.3.0-5_amd64.deb ... Unpacking sqv (1.3.0-5) over (1.3.0-3) ... Setting up sqv (1.3.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4925 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.6.0-2+b1_amd64.deb ... Unpacking libseccomp2:amd64 (2.6.0-2+b1) over (2.6.0-2) ... Setting up libseccomp2:amd64 (2.6.0-2+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4926 files and directories currently installed.) Preparing to unpack .../archives/apt_3.1.16_amd64.deb ... Unpacking apt (3.1.16) over (3.0.3) ... Setting up apt (3.1.16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4928 files and directories currently installed.) Preparing to unpack .../init-system-helpers_1.69_all.deb ... Unpacking init-system-helpers (1.69) over (1.68) ... Setting up init-system-helpers (1.69) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4929 files and directories currently installed.) Preparing to unpack .../ncurses-base_6.6+20251231-1_all.deb ... Unpacking ncurses-base (6.6+20251231-1) over (6.5+20250216-2) ... Setting up ncurses-base (6.6+20251231-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4929 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_3.15-6_amd64.deb ... Unpacking sysvinit-utils (3.15-6) over (3.14-4) ... Setting up sysvinit-utils (3.15-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4929 files and directories currently installed.) Preparing to unpack .../libaudit-common_1%3a4.1.2-1_all.deb ... Unpacking libaudit-common (1:4.1.2-1) over (1:4.0.2-2) ... Setting up libaudit-common (1:4.1.2-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4929 files and directories currently installed.) Preparing to unpack .../libcap-ng0_0.9.1-1_amd64.deb ... Unpacking libcap-ng0:amd64 (0.9.1-1) over (0.8.5-4+b1) ... Setting up libcap-ng0:amd64 (0.9.1-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4928 files and directories currently installed.) Preparing to unpack .../libaudit1_1%3a4.1.2-1+b1_amd64.deb ... Unpacking libaudit1:amd64 (1:4.1.2-1+b1) over (1:4.0.2-2+b2) ... Setting up libaudit1:amd64 (1:4.1.2-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4928 files and directories currently installed.) Preparing to unpack .../libcrypt1_1%3a4.5.1-1_amd64.deb ... Unpacking libcrypt1:amd64 (1:4.5.1-1) over (1:4.4.38-1) ... Setting up libcrypt1:amd64 (1:4.5.1-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4928 files and directories currently installed.) Preparing to unpack .../libpam0g_1.7.0-5+b1_amd64.deb ... Unpacking libpam0g:amd64 (1.7.0-5+b1) over (1.7.0-5) ... Setting up libpam0g:amd64 (1.7.0-5+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4929 files and directories currently installed.) Preparing to unpack .../libpam-modules-bin_1.7.0-5+b1_amd64.deb ... Unpacking libpam-modules-bin (1.7.0-5+b1) over (1.7.0-5) ... Setting up libpam-modules-bin (1.7.0-5+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4930 files and directories currently installed.) Preparing to unpack .../libpam-modules_1.7.0-5+b1_amd64.deb ... Unpacking libpam-modules:amd64 (1.7.0-5+b1) over (1.7.0-5) ... Setting up libpam-modules:amd64 (1.7.0-5+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4931 files and directories currently installed.) Preparing to unpack .../login_1%3a4.16.0-2+really2.41.3-3_amd64.deb ... Unpacking login (1:4.16.0-2+really2.41.3-3) over (1:4.16.0-2+really2.41-5) ... Preparing to unpack .../libacl1_2.3.2-3_amd64.deb ... Unpacking libacl1:amd64 (2.3.2-3) over (2.3.2-2+b1) ... Setting up libacl1:amd64 (2.3.2-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../libattr1_1%3a2.5.2-4_amd64.deb ... Unpacking libattr1:amd64 (1:2.5.2-4) over (1:2.5.2-3) ... Setting up libattr1:amd64 (1:2.5.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../libcap2_1%3a2.75-10+b5_amd64.deb ... Unpacking libcap2:amd64 (1:2.75-10+b5) over (1:2.75-10+b1) ... Setting up libcap2:amd64 (1:2.75-10+b5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../libdb5.3t64_5.3.28+dfsg2-11_amd64.deb ... Unpacking libdb5.3t64:amd64 (5.3.28+dfsg2-11) over (5.3.28+dfsg2-9) ... Setting up libdb5.3t64:amd64 (5.3.28+dfsg2-11) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../libsqlite3-0_3.46.1-9_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.46.1-9) over (3.46.1-7) ... Setting up libsqlite3-0:amd64 (3.46.1-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../liblastlog2-2_2.41.3-3_amd64.deb ... Unpacking liblastlog2-2:amd64 (2.41.3-3) over (2.41-5) ... Setting up liblastlog2-2:amd64 (2.41.3-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../libmd0_1.1.0-2+b2_amd64.deb ... Unpacking libmd0:amd64 (1.1.0-2+b2) over (1.1.0-2+b1) ... Setting up libmd0:amd64 (1.1.0-2+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4922 files and directories currently installed.) Preparing to unpack .../0-login.defs_1%3a4.18.0-2_all.deb ... Unpacking login.defs (1:4.18.0-2) over (1:4.17.4-2) ... Preparing to unpack .../1-mawk_1.3.4.20260129-1_amd64.deb ... Unpacking mawk (1.3.4.20260129-1) over (1.3.4.20250131-1) ... Preparing to unpack .../2-libbsd0_0.12.2-2+b1_amd64.deb ... Unpacking libbsd0:amd64 (0.12.2-2+b1) over (0.12.2-2) ... Preparing to unpack .../3-libsemanage-common_3.9-1_all.deb ... Unpacking libsemanage-common (3.9-1) over (3.8.1-1) ... Preparing to unpack .../4-libsepol2_3.9-2_amd64.deb ... Unpacking libsepol2:amd64 (3.9-2) over (3.8.1-1) ... Preparing to unpack .../5-libsemanage2_3.9-1+b1_amd64.deb ... Unpacking libsemanage2:amd64 (3.9-1+b1) over (3.8.1-1) ... Preparing to unpack .../6-passwd_1%3a4.18.0-2_amd64.deb ... Unpacking passwd (1:4.18.0-2) over (1:4.17.4-2) ... Preparing to unpack .../7-tzdata_2025c-3_all.deb ... Unpacking tzdata (2025c-3) over (2025b-4) ... Selecting previously unselected package util-linux-extra. Preparing to unpack .../8-util-linux-extra_2.41.3-3_amd64.deb ... Unpacking util-linux-extra (2.41.3-3) ... Preparing to unpack .../9-gcc-14-base_14.3.0-12_amd64.deb ... Unpacking gcc-14-base:amd64 (14.3.0-12) over (14.2.0-19) ... Setting up gcc-14-base:amd64 (14.3.0-12) ... Setting up login.defs (1:4.18.0-2) ... Setting up libsemanage-common (3.9-1) ... Setting up tzdata (2025c-3) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 23 10:42:38 UTC 2026. Universal Time is now: Mon Feb 23 10:42:38 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsepol2:amd64 (3.9-2) ... Setting up mount (2.41.3-3) ... Setting up libsemanage2:amd64 (3.9-1+b1) ... Setting up mawk (1.3.4.20260129-1) ... Setting up libbsd0:amd64 (0.12.2-2+b1) ... Setting up util-linux-extra (2.41.3-3) ... Setting up login (1:4.16.0-2+really2.41.3-3) ... Setting up passwd (1:4.18.0-2) ... Processing triggers for libc-bin (2.42-13) ... Processing triggers for debianutils (5.23.2) ... 0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', '-yf', 'dist-upgrade'] 0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m13.3s DUMP: c7335685abc8beef6b2a6ec4056d2e95 - 0m13.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m13.3s INFO: Running scripts post_setup 0m13.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_dummy_users'] 0m14.3s DUMP: useradd warning: dummy1000's uid 1000 is greater than SYS_UID_MAX 999 useradd warning: dummy1001's uid 1001 is greater than SYS_UID_MAX 999 useradd warning: dummy1002's uid 1002 is greater than SYS_UID_MAX 999 useradd warning: dummy1003's uid 1003 is greater than SYS_UID_MAX 999 useradd warning: dummy1004's uid 1004 is greater than SYS_UID_MAX 999 useradd warning: dummy1005's uid 1005 is greater than SYS_UID_MAX 999 useradd warning: dummy1006's uid 1006 is greater than SYS_UID_MAX 999 useradd warning: dummy1007's uid 1007 is greater than SYS_UID_MAX 999 useradd warning: dummy1008's uid 1008 is greater than SYS_UID_MAX 999 useradd warning: dummy1009's uid 1009 is greater than SYS_UID_MAX 999 useradd warning: dummy1010's uid 1010 is greater than SYS_UID_MAX 999 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_dummy_users'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_forbid_home'] 0m14.3s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_forbid_home'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_force-unsafe-io'] 0m14.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /usr/bin/sync to /usr/bin/sync.distrib' Adding 'local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged' '/bin/sync' -> 'true' 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_force-unsafe-io'] 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_minimize'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_minimize'] 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_squeeze-backports'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_squeeze-backports'] 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_zz_backports'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_setup_zz_backports'] 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'clean'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'clean'] 0m14.4s DEBUG: Recording chroot state 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m15.0s DUMP: install ok installed apt apt 3.1.16 install ok installed base-files base-files 14 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-2 install ok installed bsdutils bsdutils 1:2.41.3-3 install ok installed coreutils coreutils 9.7-3 install ok installed dash dash 0.5.12-12 install ok installed debconf debconf 1.5.91 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dpkg dpkg 1.23.5 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-14-base:amd64 gcc-14-base 14.3.0-12 install ok installed gcc-15-base:amd64 gcc-15-base 15.2.0-13 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.1.16 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.41.3-3 install ok installed libbsd0:amd64 libbsd0 0.12.2-2+b1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b1 install ok installed libc-bin libc-bin 2.42-13 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-13 install ok installed libc6:amd64 libc6 2.42-13 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.1-1 install ok installed libcap2:amd64 libcap2 1:2.75-10+b5 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.282+b2 install ok installed libgcc-s1:amd64 libgcc-s1 15.2.0-13 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b1 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1 install ok installed liblastlog2-2:amd64 liblastlog2-2 2.41.3-3 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-6 install ok installed liblzma5:amd64 liblzma5 5.8.2-2 install ok installed libmd0:amd64 libmd0 1.1.0-2+b2 install ok installed libmount1:amd64 libmount1 2.41.3-3 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b1 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b1 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.9-4+b1 install ok installed libsemanage-common libsemanage-common 3.9-1 install ok installed libsemanage2:amd64 libsemanage2 3.9-1+b1 install ok installed libsepol2:amd64 libsepol2 3.9-2 install ok installed libsmartcols1:amd64 libsmartcols1 2.41.3-3 install ok installed libsqlite3-0:amd64 libsqlite3-0 3.46.1-9 install ok installed libssl3t64:amd64 libssl3t64 3.5.5-1 install ok installed libstdc++6:amd64 libstdc++6 15.2.0-13 install ok installed libsystemd0:amd64 libsystemd0 259.1-1 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1 install ok installed libudev1:amd64 libudev1 259.1-1 install ok installed libuuid1:amd64 libuuid1 2.41.3-3 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b1 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b1 install ok installed login login 1:4.16.0-2+really2.41.3-3 install ok installed login.defs login.defs 1:4.18.0-2 install ok installed mawk mawk 1.3.4.20260129-1 install ok installed mount mount 2.41.3-3 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.5.5-1 install ok installed passwd passwd 1:4.18.0-2 install ok installed perl-base perl-base 5.40.1-7 install ok installed sed sed 4.9-2 install ok installed sqv sqv 1.3.0-5 install ok installed sysvinit-utils sysvinit-utils 3.15-6 install ok installed tar tar 1.35+dfsg-3.1 install ok installed tzdata tzdata 2025c-3 install ok installed util-linux util-linux 2.41.3-3 install ok installed util-linux-extra util-linux-extra 2.41.3-3 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.1-3 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-divert', '--list'] 0m15.0s DUMP: local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-divert', '--list'] 0m15.0s INFO: Running scripts is_testable 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/is_testable_uninstallable'] 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/is_testable_uninstallable'] 0m15.0s INFO: apt-cache does not know about any of the requested packages 0m15.0s INFO: Running scripts pre_test 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_test_exceptions'] 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_test_exceptions'] 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_test_root_password'] 0m15.0s DUMP: New password: Retype new password: passwd: password updated successfully 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_test_root_password'] 0m15.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m15.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m15.8s DEBUG: No broken symlinks as far as we can find. 0m15.8s INFO: Running scripts pre_install 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_database-server'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_database-server'] 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_exceptions'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_exceptions'] 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_extras'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_extras'] 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_foreign_architecture'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_foreign_architecture'] 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m15.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m16.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m16.5s DEBUG: No broken symlinks as far as we can find. 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-cache', 'policy'] 0m17.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian forky/main amd64 Packages release o=Debian,a=testing,n=forky,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m17.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-cache', 'policy'] 0m17.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-cache', 'policy', 'brz'] 0m17.3s DUMP: brz: Installed: (none) Candidate: 3.3.21-1 Version table: 3.3.21-1 500 500 http://deb.debian.org/debian forky/main amd64 Packages 0m17.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-cache', 'policy', 'brz'] 0m17.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', '-y', 'install', 'brz=3.3.21-1'] 0m42.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: adduser ca-certificates dbus dbus-bin dbus-daemon dbus-session-bus-common dbus-system-bus-common dirmngr dmsetup gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpgconf gpgsm gpgv krb5-locales libapparmor1 libassuan9 libcbor0.10 libcom-err2 libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libedit2 libexpat1 libffi8 libfido2-1 libgcrypt20 libgnutls30t64 libgpg-error-l10n libgpg-error0 libgpgme45 libgpm2 libgssapi-krb5-2 libidn2-0 libjson-c5 libk5crypto3 libkeyutils1 libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-common libldap2 libncursesw6 libnpth0t64 libp11-kit0 libpython3-stdlib libpython3.13 libpython3.13-minimal libpython3.13-stdlib libreadline8t64 libsasl2-2 libsasl2-modules libsasl2-modules-db libsodium23 libsystemd-shared libtasn1-6 libunistring5 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 libyaml-0-2 linux-sysctl-defaults lsb-release media-types netbase openssh-client openssl pinentry-curses python3 python3-autocommand python3-bcrypt python3-blinker python3-breezy python3-certifi python3-cffi-backend python3-chardet python3-charset-normalizer python3-configobj python3-cryptography python3-deprecated python3-distro python3-dulwich python3-fastbencode python3-fastimport python3-github python3-gpg python3-httplib2 python3-idna python3-inflect python3-jaraco.context python3-jaraco.functools python3-jwt python3-launchpadlib python3-lazr.restfulclient python3-lazr.uri python3-merge3 python3-minimal python3-more-itertools python3-nacl python3-oauthlib python3-patiencediff python3-pkg-resources python3-pyparsing python3-requests python3-sshsig python3-typeguard python3-typing-extensions python3-tzlocal python3-urllib3 python3-wadllib python3-wrapt python3-yaml python3.13 python3.13-minimal readline-common systemd systemd-cryptsetup systemd-timesyncd xauth Suggested packages: liblocale-gettext-perl perl cron quota brz-doc python3-breezy.tests default-dbus-session-bus | dbus-session-bus dbus-user-session libpam-systemd pinentry-gnome3 tor gpg-wks-server parcimonie xloadimage scdaemon tpm2daemon rng-tools gnutls-bin gpm krb5-doc krb5-user libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal libsasl2-modules-ldap libsasl2-modules-otp libsasl2-modules-sql libarchive13t64 libbpf1 libdw1t64 libelf1t64 libpwquality1 libqrencode4 libtss2-esys-3.0.2-0t64 libtss2-mu-4.0.1-0t64 libtss2-rc0t64 keychain libpam-ssh monkeysphere ssh-askpass pinentry-doc python3-doc python3-tk python3-venv python-blinker-doc python3-breezy-dbg python3-kerberos python3-paramiko xdg-utils python-charset-normalizer-doc python-configobj-doc python-cryptography-doc python3-cryptography-vectors git-core python-jwt-doc python3-crypto python3-keyring python3-testresources python-nacl-doc python3-setuptools python-pyparsing-doc python3-openssl python3-socks python-requests-doc python3-backports.zstd | python3-supported-min python3-brotli python3.13-venv python3.13-doc binutils binfmt-support readline-doc systemd-container systemd-homed systemd-userdbd systemd-boot systemd-resolved systemd-repart libtss2-tcti-device0 polkitd The following NEW packages will be installed: adduser brz ca-certificates dbus dbus-bin dbus-daemon dbus-session-bus-common dbus-system-bus-common dirmngr dmsetup gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpgconf gpgsm gpgv krb5-locales libapparmor1 libassuan9 libcbor0.10 libcom-err2 libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libedit2 libexpat1 libffi8 libfido2-1 libgcrypt20 libgnutls30t64 libgpg-error-l10n libgpg-error0 libgpgme45 libgpm2 libgssapi-krb5-2 libidn2-0 libjson-c5 libk5crypto3 libkeyutils1 libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-common libldap2 libncursesw6 libnpth0t64 libp11-kit0 libpython3-stdlib libpython3.13 libpython3.13-minimal libpython3.13-stdlib libreadline8t64 libsasl2-2 libsasl2-modules libsasl2-modules-db libsodium23 libsystemd-shared libtasn1-6 libunistring5 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 libyaml-0-2 linux-sysctl-defaults lsb-release media-types netbase openssh-client openssl pinentry-curses python3 python3-autocommand python3-bcrypt python3-blinker python3-breezy python3-certifi python3-cffi-backend python3-chardet python3-charset-normalizer python3-configobj python3-cryptography python3-deprecated python3-distro python3-dulwich python3-fastbencode python3-fastimport python3-github python3-gpg python3-httplib2 python3-idna python3-inflect python3-jaraco.context python3-jaraco.functools python3-jwt python3-launchpadlib python3-lazr.restfulclient python3-lazr.uri python3-merge3 python3-minimal python3-more-itertools python3-nacl python3-oauthlib python3-patiencediff python3-pkg-resources python3-pyparsing python3-requests python3-sshsig python3-typeguard python3-typing-extensions python3-tzlocal python3-urllib3 python3-wadllib python3-wrapt python3-yaml python3.13 python3.13-minimal readline-common systemd systemd-cryptsetup systemd-timesyncd xauth 0 upgraded, 129 newly installed, 0 to remove and 0 not upgraded. Need to get 37.7 MB of archives. After this operation, 145 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian forky/main amd64 libsystemd-shared amd64 259.1-1 [2379 kB] Get:2 http://deb.debian.org/debian forky/main amd64 systemd amd64 259.1-1 [3267 kB] Get:3 http://deb.debian.org/debian forky/main amd64 libdbus-1-3 amd64 1.16.2-3 [179 kB] Get:4 http://deb.debian.org/debian forky/main amd64 dbus-bin amd64 1.16.2-3 [80.3 kB] Get:5 http://deb.debian.org/debian forky/main amd64 dbus-session-bus-common all 1.16.2-3 [52.6 kB] Get:6 http://deb.debian.org/debian forky/main amd64 libapparmor1 amd64 4.1.6-2 [44.4 kB] Get:7 http://deb.debian.org/debian forky/main amd64 libexpat1 amd64 2.7.4-1 [116 kB] Get:8 http://deb.debian.org/debian forky/main amd64 dbus-daemon amd64 1.16.2-3 [160 kB] Get:9 http://deb.debian.org/debian forky/main amd64 adduser all 3.154 [210 kB] Get:10 http://deb.debian.org/debian forky/main amd64 dbus-system-bus-common all 1.16.2-3 [53.8 kB] Get:11 http://deb.debian.org/debian forky/main amd64 dbus amd64 1.16.2-3 [72.0 kB] Get:12 http://deb.debian.org/debian forky/main amd64 libpython3.13-minimal amd64 3.13.12-1 [866 kB] Get:13 http://deb.debian.org/debian forky/main amd64 python3.13-minimal amd64 3.13.12-1 [2267 kB] Get:14 http://deb.debian.org/debian forky/main amd64 python3-minimal amd64 3.13.9-3 [27.6 kB] Get:15 http://deb.debian.org/debian forky/main amd64 media-types all 14.0.0 [30.8 kB] Get:16 http://deb.debian.org/debian forky/main amd64 netbase all 6.5 [12.4 kB] Get:17 http://deb.debian.org/debian forky/main amd64 libffi8 amd64 3.5.2-3+b1 [26.4 kB] Get:18 http://deb.debian.org/debian forky/main amd64 libncursesw6 amd64 6.6+20251231-1 [137 kB] Get:19 http://deb.debian.org/debian forky/main amd64 readline-common all 8.3-4 [74.8 kB] Get:20 http://deb.debian.org/debian forky/main amd64 libreadline8t64 amd64 8.3-4 [181 kB] Get:21 http://deb.debian.org/debian forky/main amd64 libpython3.13-stdlib amd64 3.13.12-1 [1974 kB] Get:22 http://deb.debian.org/debian forky/main amd64 python3.13 amd64 3.13.12-1 [776 kB] Get:23 http://deb.debian.org/debian forky/main amd64 libpython3-stdlib amd64 3.13.9-3 [10.5 kB] Get:24 http://deb.debian.org/debian forky/main amd64 python3 amd64 3.13.9-3 [27.6 kB] Get:25 http://deb.debian.org/debian forky/main amd64 linux-sysctl-defaults all 4.15 [5852 B] Get:26 http://deb.debian.org/debian forky/main amd64 openssl amd64 3.5.5-1 [1500 kB] Get:27 http://deb.debian.org/debian forky/main amd64 ca-certificates all 20250419 [162 kB] Get:28 http://deb.debian.org/debian forky/main amd64 krb5-locales all 1.22.1-2 [101 kB] Get:29 http://deb.debian.org/debian forky/main amd64 libedit2 amd64 3.1-20251016-1 [93.6 kB] Get:30 http://deb.debian.org/debian forky/main amd64 libcbor0.10 amd64 0.10.2-2.1 [28.7 kB] Get:31 http://deb.debian.org/debian forky/main amd64 libfido2-1 amd64 1.16.0-2+b1 [79.3 kB] Get:32 http://deb.debian.org/debian forky/main amd64 libkrb5support0 amd64 1.22.1-2 [33.1 kB] Get:33 http://deb.debian.org/debian forky/main amd64 libcom-err2 amd64 1.47.2-3+b8 [25.1 kB] Get:34 http://deb.debian.org/debian forky/main amd64 libk5crypto3 amd64 1.22.1-2 [81.1 kB] Get:35 http://deb.debian.org/debian forky/main amd64 libkeyutils1 amd64 1.6.3-6+b1 [9784 B] Get:36 http://deb.debian.org/debian forky/main amd64 libkrb5-3 amd64 1.22.1-2 [337 kB] Get:37 http://deb.debian.org/debian forky/main amd64 libgssapi-krb5-2 amd64 1.22.1-2 [139 kB] Get:38 http://deb.debian.org/debian forky/main amd64 openssh-client amd64 1:10.2p1-5 [1031 kB] Get:39 http://deb.debian.org/debian forky/main amd64 systemd-timesyncd amd64 259.1-1 [96.0 kB] Get:40 http://deb.debian.org/debian forky/main amd64 python3-configobj all 5.0.9-1 [34.0 kB] Get:41 http://deb.debian.org/debian forky/main amd64 python3-urllib3 all 2.6.3-1 [120 kB] Get:42 http://deb.debian.org/debian forky/main amd64 python3-typing-extensions all 4.15.0-2 [92.5 kB] Get:43 http://deb.debian.org/debian forky/main amd64 python3-dulwich amd64 1.0.0-2 [833 kB] Get:44 http://deb.debian.org/debian forky/main amd64 python3-fastbencode amd64 0.3.8-1 [259 kB] Get:45 http://deb.debian.org/debian forky/main amd64 python3-merge3 all 0.0.8-1 [10.1 kB] Get:46 http://deb.debian.org/debian forky/main amd64 python3-tzlocal all 5.3.1-2 [24.3 kB] Get:47 http://deb.debian.org/debian forky/main amd64 libyaml-0-2 amd64 0.2.5-2+b1 [53.8 kB] Get:48 http://deb.debian.org/debian forky/main amd64 python3-yaml amd64 6.0.3-1 [186 kB] Get:49 http://deb.debian.org/debian forky/main amd64 python3-patiencediff amd64 0.2.13-1+b5 [23.1 kB] Get:50 http://deb.debian.org/debian forky/main amd64 python3-breezy amd64 3.3.21-1 [2893 kB] Get:51 http://deb.debian.org/debian forky/main amd64 libpython3.13 amd64 3.13.12-1 [2187 kB] Get:52 http://deb.debian.org/debian forky/main amd64 brz amd64 3.3.21-1 [236 kB] Get:53 http://deb.debian.org/debian forky/main amd64 libgpg-error0 amd64 1.58-2 [89.7 kB] Get:54 http://deb.debian.org/debian forky/main amd64 libassuan9 amd64 3.0.2-2+b1 [62.1 kB] Get:55 http://deb.debian.org/debian forky/main amd64 libgcrypt20 amd64 1.11.2-3+b1 [871 kB] Get:56 http://deb.debian.org/debian forky/main amd64 gpgconf amd64 2.4.8-5 [129 kB] Get:57 http://deb.debian.org/debian forky/main amd64 libunistring5 amd64 1.3-2+b1 [466 kB] Get:58 http://deb.debian.org/debian forky/main amd64 libidn2-0 amd64 2.3.8-4+b1 [110 kB] Get:59 http://deb.debian.org/debian forky/main amd64 libp11-kit0 amd64 0.25.10-1+b1 [444 kB] Get:60 http://deb.debian.org/debian forky/main amd64 libtasn1-6 amd64 4.21.0-2 [50.4 kB] Get:61 http://deb.debian.org/debian forky/main amd64 libgnutls30t64 amd64 3.8.12-2 [1518 kB] Get:62 http://deb.debian.org/debian forky/main amd64 libksba8 amd64 1.6.7-2+b2 [136 kB] Get:63 http://deb.debian.org/debian forky/main amd64 libsasl2-modules-db amd64 2.1.28+dfsg1-10 [19.8 kB] Get:64 http://deb.debian.org/debian forky/main amd64 libsasl2-2 amd64 2.1.28+dfsg1-10 [57.8 kB] Get:65 http://deb.debian.org/debian forky/main amd64 libldap2 amd64 2.6.10+dfsg-1+b1 [195 kB] Get:66 http://deb.debian.org/debian forky/main amd64 libnpth0t64 amd64 1.8-3+b1 [23.6 kB] Get:67 http://deb.debian.org/debian forky/main amd64 dirmngr amd64 2.4.8-5 [386 kB] Get:68 http://deb.debian.org/debian forky/main amd64 libdevmapper1.02.1 amd64 2:1.02.205-2+b1 [136 kB] Get:69 http://deb.debian.org/debian forky/main amd64 dmsetup amd64 2:1.02.205-2+b1 [83.1 kB] Get:70 http://deb.debian.org/debian forky/main amd64 gnupg-l10n all 2.4.8-5 [752 kB] Get:71 http://deb.debian.org/debian forky/main amd64 gpg amd64 2.4.8-5 [639 kB] Get:72 http://deb.debian.org/debian forky/main amd64 pinentry-curses amd64 1.3.2-3 [87.8 kB] Get:73 http://deb.debian.org/debian forky/main amd64 gpg-agent amd64 2.4.8-5 [273 kB] Get:74 http://deb.debian.org/debian forky/main amd64 gpgsm amd64 2.4.8-5 [278 kB] Get:75 http://deb.debian.org/debian forky/main amd64 gnupg all 2.4.8-5 [418 kB] Get:76 http://deb.debian.org/debian forky/main amd64 gpg-wks-client amd64 2.4.8-5 [110 kB] Get:77 http://deb.debian.org/debian forky/main amd64 gpgv amd64 2.4.8-5 [244 kB] Get:78 http://deb.debian.org/debian forky/main amd64 libjson-c5 amd64 0.18+ds-2 [46.3 kB] Get:79 http://deb.debian.org/debian forky/main amd64 libcryptsetup12 amd64 2:2.8.4-1 [264 kB] Get:80 http://deb.debian.org/debian forky/main amd64 libgpg-error-l10n all 1.58-2 [120 kB] Get:81 http://deb.debian.org/debian forky/main amd64 libgpgme45 amd64 2.0.1-2 [349 kB] Get:82 http://deb.debian.org/debian forky/main amd64 libgpm2 amd64 1.20.7-12+b1 [14.6 kB] Get:83 http://deb.debian.org/debian forky/main amd64 libkmod2 amd64 34.2-2+b1 [63.6 kB] Get:84 http://deb.debian.org/debian forky/main amd64 libldap-common all 2.6.10+dfsg-1 [35.1 kB] Get:85 http://deb.debian.org/debian forky/main amd64 libsasl2-modules amd64 2.1.28+dfsg1-10 [67.2 kB] Get:86 http://deb.debian.org/debian forky/main amd64 libsodium23 amd64 1.0.18-2 [166 kB] Get:87 http://deb.debian.org/debian forky/main amd64 libxau6 amd64 1:1.0.11-1+b1 [20.8 kB] Get:88 http://deb.debian.org/debian forky/main amd64 libxdmcp6 amd64 1:1.1.5-2 [27.9 kB] Get:89 http://deb.debian.org/debian forky/main amd64 libxcb1 amd64 1.17.0-2+b2 [144 kB] Get:90 http://deb.debian.org/debian forky/main amd64 libx11-data all 2:1.8.12-1 [343 kB] Get:91 http://deb.debian.org/debian forky/main amd64 libx11-6 amd64 2:1.8.12-1+b1 [824 kB] Get:92 http://deb.debian.org/debian forky/main amd64 libxext6 amd64 2:1.3.4-1+b4 [50.7 kB] Get:93 http://deb.debian.org/debian forky/main amd64 libxmuu1 amd64 2:1.1.3-4 [21.7 kB] Get:94 http://deb.debian.org/debian forky/main amd64 lsb-release all 12.1-2 [6072 B] Get:95 http://deb.debian.org/debian forky/main amd64 python3-autocommand all 2.2.2-4 [13.7 kB] Get:96 http://deb.debian.org/debian forky/main amd64 python3-bcrypt amd64 5.0.0-3 [243 kB] Get:97 http://deb.debian.org/debian forky/main amd64 python3-blinker all 1.9.0-2 [12.7 kB] Get:98 http://deb.debian.org/debian forky/main amd64 python3-certifi all 2026.1.4+ds-1 [10.1 kB] Get:99 http://deb.debian.org/debian forky/main amd64 python3-cffi-backend amd64 2.0.0-3 [111 kB] Get:100 http://deb.debian.org/debian forky/main amd64 python3-chardet all 5.2.0+dfsg-2 [108 kB] Get:101 http://deb.debian.org/debian forky/main amd64 python3-charset-normalizer amd64 3.4.4-2 [171 kB] Get:102 http://deb.debian.org/debian forky/main amd64 python3-cryptography amd64 46.0.5-1 [1119 kB] Get:103 http://deb.debian.org/debian forky/main amd64 python3-wrapt amd64 1.17.3-3 [50.1 kB] Get:104 http://deb.debian.org/debian forky/main amd64 python3-deprecated all 1.3.1-1 [12.1 kB] Get:105 http://deb.debian.org/debian forky/main amd64 python3-distro all 1.9.0-1 [20.3 kB] Get:106 http://deb.debian.org/debian forky/main amd64 python3-fastimport all 0.9.14-2.1 [32.8 kB] Get:107 http://deb.debian.org/debian forky/main amd64 python3-jwt all 2.10.1-4 [31.5 kB] Get:108 http://deb.debian.org/debian forky/main amd64 python3-nacl amd64 1.5.0-8 [64.0 kB] Get:109 http://deb.debian.org/debian forky/main amd64 python3-idna all 3.11-1 [41.7 kB] Get:110 http://deb.debian.org/debian forky/main amd64 python3-requests all 2.32.5+dfsg-1 [72.4 kB] Get:111 http://deb.debian.org/debian forky/main amd64 python3-github all 2.6.1-1 [176 kB] Get:112 http://deb.debian.org/debian forky/main amd64 python3-gpg amd64 2.0.0-2+b1 [277 kB] Get:113 http://deb.debian.org/debian forky/main amd64 python3-pyparsing all 3.1.3-1 [148 kB] Get:114 http://deb.debian.org/debian forky/main amd64 python3-httplib2 all 0.22.0-1 [36.1 kB] Get:115 http://deb.debian.org/debian forky/main amd64 python3-more-itertools all 10.8.0-1 [71.7 kB] Get:116 http://deb.debian.org/debian forky/main amd64 python3-typeguard all 4.4.4-2 [37.2 kB] Get:117 http://deb.debian.org/debian forky/main amd64 python3-inflect all 7.5.0-1 [33.0 kB] Get:118 http://deb.debian.org/debian forky/main amd64 python3-jaraco.context all 6.0.1-2 [8184 B] Get:119 http://deb.debian.org/debian forky/main amd64 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get:120 http://deb.debian.org/debian forky/main amd64 python3-lazr.uri all 1.0.6-7 [14.0 kB] Get:121 http://deb.debian.org/debian forky/main amd64 python3-wadllib all 2.0.0-3 [37.6 kB] Get:122 http://deb.debian.org/debian forky/main amd64 python3-oauthlib all 3.3.1-1 [99.5 kB] Get:123 http://deb.debian.org/debian forky/main amd64 python3-pkg-resources all 78.1.1-0.1 [224 kB] Get:124 http://deb.debian.org/debian forky/main amd64 python3-lazr.restfulclient all 0.14.6-3 [50.8 kB] Get:125 http://deb.debian.org/debian forky/main amd64 python3-launchpadlib all 2.1.0-1 [136 kB] Get:126 http://deb.debian.org/debian forky/main amd64 python3-sshsig all 0.2.2-2 [10.7 kB] Get:127 http://deb.debian.org/debian forky/main amd64 systemd-cryptsetup amd64 259.1-1 [177 kB] Get:128 http://deb.debian.org/debian forky/main amd64 xauth amd64 1:1.1.2-1.1 [35.9 kB] Get:129 http://deb.debian.org/debian forky/main amd64 gnupg-utils amd64 2.4.8-5 [195 kB] Preconfiguring packages ... Fetched 37.7 MB in 2s (19.0 MB/s) Selecting previously unselected package libsystemd-shared:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5037 files and directories currently installed.) Preparing to unpack .../libsystemd-shared_259.1-1_amd64.deb ... Unpacking libsystemd-shared:amd64 (259.1-1) ... Setting up libsystemd-shared:amd64 (259.1-1) ... Selecting previously unselected package systemd. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5045 files and directories currently installed.) Preparing to unpack .../0-systemd_259.1-1_amd64.deb ... Unpacking systemd (259.1-1) ... Selecting previously unselected package libdbus-1-3:amd64. Preparing to unpack .../1-libdbus-1-3_1.16.2-3_amd64.deb ... Unpacking libdbus-1-3:amd64 (1.16.2-3) ... Selecting previously unselected package dbus-bin. Preparing to unpack .../2-dbus-bin_1.16.2-3_amd64.deb ... Unpacking dbus-bin (1.16.2-3) ... Selecting previously unselected package dbus-session-bus-common. Preparing to unpack .../3-dbus-session-bus-common_1.16.2-3_all.deb ... Unpacking dbus-session-bus-common (1.16.2-3) ... Selecting previously unselected package libapparmor1:amd64. Preparing to unpack .../4-libapparmor1_4.1.6-2_amd64.deb ... Unpacking libapparmor1:amd64 (4.1.6-2) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../5-libexpat1_2.7.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.7.4-1) ... Selecting previously unselected package dbus-daemon. Preparing to unpack .../6-dbus-daemon_1.16.2-3_amd64.deb ... Unpacking dbus-daemon (1.16.2-3) ... Selecting previously unselected package adduser. Preparing to unpack .../7-adduser_3.154_all.deb ... Unpacking adduser (3.154) ... Setting up adduser (3.154) ... Selecting previously unselected package dbus-system-bus-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to unpack .../dbus-system-bus-common_1.16.2-3_all.deb ... Unpacking dbus-system-bus-common (1.16.2-3) ... Selecting previously unselected package dbus. Preparing to unpack .../dbus_1.16.2-3_amd64.deb ... Unpacking dbus (1.16.2-3) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.12-1_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.12-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.12-1_amd64.deb ... Unpacking python3.13-minimal (3.13.12-1) ... Setting up libpython3.13-minimal:amd64 (3.13.12-1) ... Setting up libexpat1:amd64 (2.7.4-1) ... Setting up python3.13-minimal (3.13.12-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6571 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.13.9-3_amd64.deb ... Unpacking python3-minimal (3.13.9-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_14.0.0_all.deb ... Unpacking media-types (14.0.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.5_all.deb ... Unpacking netbase (6.5) ... Selecting previously unselected package libffi8:amd64. Preparing to unpack .../3-libffi8_3.5.2-3+b1_amd64.deb ... Unpacking libffi8:amd64 (3.5.2-3+b1) ... Selecting previously unselected package libncursesw6:amd64. Preparing to unpack .../4-libncursesw6_6.6+20251231-1_amd64.deb ... Unpacking libncursesw6:amd64 (6.6+20251231-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../5-readline-common_8.3-4_all.deb ... Unpacking readline-common (8.3-4) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../6-libreadline8t64_8.3-4_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.3-4) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../7-libpython3.13-stdlib_3.13.12-1_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.12-1) ... Selecting previously unselected package python3.13. Preparing to unpack .../8-python3.13_3.13.12-1_amd64.deb ... Unpacking python3.13 (3.13.12-1) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../9-libpython3-stdlib_3.13.9-3_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.9-3) ... Setting up python3-minimal (3.13.9-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 7081 files and directories currently installed.) Preparing to unpack .../000-python3_3.13.9-3_amd64.deb ... Unpacking python3 (3.13.9-3) ... Selecting previously unselected package linux-sysctl-defaults. Preparing to unpack .../001-linux-sysctl-defaults_4.15_all.deb ... Unpacking linux-sysctl-defaults (4.15) ... Selecting previously unselected package openssl. Preparing to unpack .../002-openssl_3.5.5-1_amd64.deb ... Unpacking openssl (3.5.5-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../003-ca-certificates_20250419_all.deb ... Unpacking ca-certificates (20250419) ... Selecting previously unselected package krb5-locales. Preparing to unpack .../004-krb5-locales_1.22.1-2_all.deb ... Unpacking krb5-locales (1.22.1-2) ... Selecting previously unselected package libedit2:amd64. Preparing to unpack .../005-libedit2_3.1-20251016-1_amd64.deb ... Unpacking libedit2:amd64 (3.1-20251016-1) ... Selecting previously unselected package libcbor0.10:amd64. Preparing to unpack .../006-libcbor0.10_0.10.2-2.1_amd64.deb ... Unpacking libcbor0.10:amd64 (0.10.2-2.1) ... Selecting previously unselected package libfido2-1:amd64. Preparing to unpack .../007-libfido2-1_1.16.0-2+b1_amd64.deb ... Unpacking libfido2-1:amd64 (1.16.0-2+b1) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../008-libkrb5support0_1.22.1-2_amd64.deb ... Unpacking libkrb5support0:amd64 (1.22.1-2) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../009-libcom-err2_1.47.2-3+b8_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.2-3+b8) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../010-libk5crypto3_1.22.1-2_amd64.deb ... Unpacking libk5crypto3:amd64 (1.22.1-2) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../011-libkeyutils1_1.6.3-6+b1_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-6+b1) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../012-libkrb5-3_1.22.1-2_amd64.deb ... Unpacking libkrb5-3:amd64 (1.22.1-2) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../013-libgssapi-krb5-2_1.22.1-2_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.22.1-2) ... Selecting previously unselected package openssh-client. Preparing to unpack .../014-openssh-client_1%3a10.2p1-5_amd64.deb ... Unpacking openssh-client (1:10.2p1-5) ... Selecting previously unselected package systemd-timesyncd. Preparing to unpack .../015-systemd-timesyncd_259.1-1_amd64.deb ... Unpacking systemd-timesyncd (259.1-1) ... Selecting previously unselected package python3-configobj. Preparing to unpack .../016-python3-configobj_5.0.9-1_all.deb ... Unpacking python3-configobj (5.0.9-1) ... Selecting previously unselected package python3-urllib3. Preparing to unpack .../017-python3-urllib3_2.6.3-1_all.deb ... Unpacking python3-urllib3 (2.6.3-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../018-python3-typing-extensions_4.15.0-2_all.deb ... Unpacking python3-typing-extensions (4.15.0-2) ... Selecting previously unselected package python3-dulwich. Preparing to unpack .../019-python3-dulwich_1.0.0-2_amd64.deb ... Unpacking python3-dulwich (1.0.0-2) ... Selecting previously unselected package python3-fastbencode. Preparing to unpack .../020-python3-fastbencode_0.3.8-1_amd64.deb ... Unpacking python3-fastbencode (0.3.8-1) ... Selecting previously unselected package python3-merge3. Preparing to unpack .../021-python3-merge3_0.0.8-1_all.deb ... Unpacking python3-merge3 (0.0.8-1) ... Selecting previously unselected package python3-tzlocal. Preparing to unpack .../022-python3-tzlocal_5.3.1-2_all.deb ... Unpacking python3-tzlocal (5.3.1-2) ... Selecting previously unselected package libyaml-0-2:amd64. Preparing to unpack .../023-libyaml-0-2_0.2.5-2+b1_amd64.deb ... Unpacking libyaml-0-2:amd64 (0.2.5-2+b1) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../024-python3-yaml_6.0.3-1_amd64.deb ... Unpacking python3-yaml (6.0.3-1) ... Selecting previously unselected package python3-patiencediff. Preparing to unpack .../025-python3-patiencediff_0.2.13-1+b5_amd64.deb ... Unpacking python3-patiencediff (0.2.13-1+b5) ... Selecting previously unselected package python3-breezy. Preparing to unpack .../026-python3-breezy_3.3.21-1_amd64.deb ... Unpacking python3-breezy (3.3.21-1) ... Selecting previously unselected package libpython3.13:amd64. Preparing to unpack .../027-libpython3.13_3.13.12-1_amd64.deb ... Unpacking libpython3.13:amd64 (3.13.12-1) ... Selecting previously unselected package brz. Preparing to unpack .../028-brz_3.3.21-1_amd64.deb ... Unpacking brz (3.3.21-1) ... Selecting previously unselected package libgpg-error0:amd64. Preparing to unpack .../029-libgpg-error0_1.58-2_amd64.deb ... Unpacking libgpg-error0:amd64 (1.58-2) ... Selecting previously unselected package libassuan9:amd64. Preparing to unpack .../030-libassuan9_3.0.2-2+b1_amd64.deb ... Unpacking libassuan9:amd64 (3.0.2-2+b1) ... Selecting previously unselected package libgcrypt20:amd64. Preparing to unpack .../031-libgcrypt20_1.11.2-3+b1_amd64.deb ... Unpacking libgcrypt20:amd64 (1.11.2-3+b1) ... Selecting previously unselected package gpgconf. Preparing to unpack .../032-gpgconf_2.4.8-5_amd64.deb ... Unpacking gpgconf (2.4.8-5) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../033-libunistring5_1.3-2+b1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2+b1) ... Selecting previously unselected package libidn2-0:amd64. Preparing to unpack .../034-libidn2-0_2.3.8-4+b1_amd64.deb ... Unpacking libidn2-0:amd64 (2.3.8-4+b1) ... Selecting previously unselected package libp11-kit0:amd64. Preparing to unpack .../035-libp11-kit0_0.25.10-1+b1_amd64.deb ... Unpacking libp11-kit0:amd64 (0.25.10-1+b1) ... Selecting previously unselected package libtasn1-6:amd64. Preparing to unpack .../036-libtasn1-6_4.21.0-2_amd64.deb ... Unpacking libtasn1-6:amd64 (4.21.0-2) ... Selecting previously unselected package libgnutls30t64:amd64. Preparing to unpack .../037-libgnutls30t64_3.8.12-2_amd64.deb ... Unpacking libgnutls30t64:amd64 (3.8.12-2) ... Selecting previously unselected package libksba8:amd64. Preparing to unpack .../038-libksba8_1.6.7-2+b2_amd64.deb ... Unpacking libksba8:amd64 (1.6.7-2+b2) ... Selecting previously unselected package libsasl2-modules-db:amd64. Preparing to unpack .../039-libsasl2-modules-db_2.1.28+dfsg1-10_amd64.deb ... Unpacking libsasl2-modules-db:amd64 (2.1.28+dfsg1-10) ... Selecting previously unselected package libsasl2-2:amd64. Preparing to unpack .../040-libsasl2-2_2.1.28+dfsg1-10_amd64.deb ... Unpacking libsasl2-2:amd64 (2.1.28+dfsg1-10) ... Selecting previously unselected package libldap2:amd64. Preparing to unpack .../041-libldap2_2.6.10+dfsg-1+b1_amd64.deb ... Unpacking libldap2:amd64 (2.6.10+dfsg-1+b1) ... Selecting previously unselected package libnpth0t64:amd64. Preparing to unpack .../042-libnpth0t64_1.8-3+b1_amd64.deb ... Unpacking libnpth0t64:amd64 (1.8-3+b1) ... Selecting previously unselected package dirmngr. Preparing to unpack .../043-dirmngr_2.4.8-5_amd64.deb ... Unpacking dirmngr (2.4.8-5) ... Selecting previously unselected package libdevmapper1.02.1:amd64. Preparing to unpack .../044-libdevmapper1.02.1_2%3a1.02.205-2+b1_amd64.deb ... Unpacking libdevmapper1.02.1:amd64 (2:1.02.205-2+b1) ... Selecting previously unselected package dmsetup. Preparing to unpack .../045-dmsetup_2%3a1.02.205-2+b1_amd64.deb ... Unpacking dmsetup (2:1.02.205-2+b1) ... Selecting previously unselected package gnupg-l10n. Preparing to unpack .../046-gnupg-l10n_2.4.8-5_all.deb ... Unpacking gnupg-l10n (2.4.8-5) ... Selecting previously unselected package gpg. Preparing to unpack .../047-gpg_2.4.8-5_amd64.deb ... Unpacking gpg (2.4.8-5) ... Selecting previously unselected package pinentry-curses. Preparing to unpack .../048-pinentry-curses_1.3.2-3_amd64.deb ... Unpacking pinentry-curses (1.3.2-3) ... Selecting previously unselected package gpg-agent. Preparing to unpack .../049-gpg-agent_2.4.8-5_amd64.deb ... Unpacking gpg-agent (2.4.8-5) ... Selecting previously unselected package gpgsm. Preparing to unpack .../050-gpgsm_2.4.8-5_amd64.deb ... Unpacking gpgsm (2.4.8-5) ... Selecting previously unselected package gnupg. Preparing to unpack .../051-gnupg_2.4.8-5_all.deb ... Unpacking gnupg (2.4.8-5) ... Selecting previously unselected package gpg-wks-client. Preparing to unpack .../052-gpg-wks-client_2.4.8-5_amd64.deb ... Unpacking gpg-wks-client (2.4.8-5) ... Selecting previously unselected package gpgv. Preparing to unpack .../053-gpgv_2.4.8-5_amd64.deb ... Unpacking gpgv (2.4.8-5) ... Selecting previously unselected package libjson-c5:amd64. Preparing to unpack .../054-libjson-c5_0.18+ds-2_amd64.deb ... Unpacking libjson-c5:amd64 (0.18+ds-2) ... Selecting previously unselected package libcryptsetup12:amd64. Preparing to unpack .../055-libcryptsetup12_2%3a2.8.4-1_amd64.deb ... Unpacking libcryptsetup12:amd64 (2:2.8.4-1) ... Selecting previously unselected package libgpg-error-l10n. Preparing to unpack .../056-libgpg-error-l10n_1.58-2_all.deb ... Unpacking libgpg-error-l10n (1.58-2) ... Selecting previously unselected package libgpgme45:amd64. Preparing to unpack .../057-libgpgme45_2.0.1-2_amd64.deb ... Unpacking libgpgme45:amd64 (2.0.1-2) ... Selecting previously unselected package libgpm2:amd64. Preparing to unpack .../058-libgpm2_1.20.7-12+b1_amd64.deb ... Unpacking libgpm2:amd64 (1.20.7-12+b1) ... Selecting previously unselected package libkmod2:amd64. Preparing to unpack .../059-libkmod2_34.2-2+b1_amd64.deb ... Unpacking libkmod2:amd64 (34.2-2+b1) ... Selecting previously unselected package libldap-common. Preparing to unpack .../060-libldap-common_2.6.10+dfsg-1_all.deb ... Unpacking libldap-common (2.6.10+dfsg-1) ... Selecting previously unselected package libsasl2-modules:amd64. Preparing to unpack .../061-libsasl2-modules_2.1.28+dfsg1-10_amd64.deb ... Unpacking libsasl2-modules:amd64 (2.1.28+dfsg1-10) ... Selecting previously unselected package libsodium23:amd64. Preparing to unpack .../062-libsodium23_1.0.18-2_amd64.deb ... Unpacking libsodium23:amd64 (1.0.18-2) ... Selecting previously unselected package libxau6:amd64. Preparing to unpack .../063-libxau6_1%3a1.0.11-1+b1_amd64.deb ... Unpacking libxau6:amd64 (1:1.0.11-1+b1) ... Selecting previously unselected package libxdmcp6:amd64. Preparing to unpack .../064-libxdmcp6_1%3a1.1.5-2_amd64.deb ... Unpacking libxdmcp6:amd64 (1:1.1.5-2) ... Selecting previously unselected package libxcb1:amd64. Preparing to unpack .../065-libxcb1_1.17.0-2+b2_amd64.deb ... Unpacking libxcb1:amd64 (1.17.0-2+b2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../066-libx11-data_2%3a1.8.12-1_all.deb ... Unpacking libx11-data (2:1.8.12-1) ... Selecting previously unselected package libx11-6:amd64. Preparing to unpack .../067-libx11-6_2%3a1.8.12-1+b1_amd64.deb ... Unpacking libx11-6:amd64 (2:1.8.12-1+b1) ... Selecting previously unselected package libxext6:amd64. Preparing to unpack .../068-libxext6_2%3a1.3.4-1+b4_amd64.deb ... Unpacking libxext6:amd64 (2:1.3.4-1+b4) ... Selecting previously unselected package libxmuu1:amd64. Preparing to unpack .../069-libxmuu1_2%3a1.1.3-4_amd64.deb ... Unpacking libxmuu1:amd64 (2:1.1.3-4) ... Selecting previously unselected package lsb-release. Preparing to unpack .../070-lsb-release_12.1-2_all.deb ... Unpacking lsb-release (12.1-2) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../071-python3-autocommand_2.2.2-4_all.deb ... Unpacking python3-autocommand (2.2.2-4) ... Selecting previously unselected package python3-bcrypt. Preparing to unpack .../072-python3-bcrypt_5.0.0-3_amd64.deb ... Unpacking python3-bcrypt (5.0.0-3) ... Selecting previously unselected package python3-blinker. Preparing to unpack .../073-python3-blinker_1.9.0-2_all.deb ... Unpacking python3-blinker (1.9.0-2) ... Selecting previously unselected package python3-certifi. Preparing to unpack .../074-python3-certifi_2026.1.4+ds-1_all.deb ... Unpacking python3-certifi (2026.1.4+ds-1) ... Selecting previously unselected package python3-cffi-backend:amd64. Preparing to unpack .../075-python3-cffi-backend_2.0.0-3_amd64.deb ... Unpacking python3-cffi-backend:amd64 (2.0.0-3) ... Selecting previously unselected package python3-chardet. Preparing to unpack .../076-python3-chardet_5.2.0+dfsg-2_all.deb ... Unpacking python3-chardet (5.2.0+dfsg-2) ... Selecting previously unselected package python3-charset-normalizer. Preparing to unpack .../077-python3-charset-normalizer_3.4.4-2_amd64.deb ... Unpacking python3-charset-normalizer (3.4.4-2) ... Selecting previously unselected package python3-cryptography. Preparing to unpack .../078-python3-cryptography_46.0.5-1_amd64.deb ... Unpacking python3-cryptography (46.0.5-1) ... Selecting previously unselected package python3-wrapt. Preparing to unpack .../079-python3-wrapt_1.17.3-3_amd64.deb ... Unpacking python3-wrapt (1.17.3-3) ... Selecting previously unselected package python3-deprecated. Preparing to unpack .../080-python3-deprecated_1.3.1-1_all.deb ... Unpacking python3-deprecated (1.3.1-1) ... Selecting previously unselected package python3-distro. Preparing to unpack .../081-python3-distro_1.9.0-1_all.deb ... Unpacking python3-distro (1.9.0-1) ... Selecting previously unselected package python3-fastimport. Preparing to unpack .../082-python3-fastimport_0.9.14-2.1_all.deb ... Unpacking python3-fastimport (0.9.14-2.1) ... Selecting previously unselected package python3-jwt. Preparing to unpack .../083-python3-jwt_2.10.1-4_all.deb ... Unpacking python3-jwt (2.10.1-4) ... Selecting previously unselected package python3-nacl. Preparing to unpack .../084-python3-nacl_1.5.0-8_amd64.deb ... Unpacking python3-nacl (1.5.0-8) ... Selecting previously unselected package python3-idna. Preparing to unpack .../085-python3-idna_3.11-1_all.deb ... Unpacking python3-idna (3.11-1) ... Selecting previously unselected package python3-requests. Preparing to unpack .../086-python3-requests_2.32.5+dfsg-1_all.deb ... Unpacking python3-requests (2.32.5+dfsg-1) ... Selecting previously unselected package python3-github. Preparing to unpack .../087-python3-github_2.6.1-1_all.deb ... Unpacking python3-github (2.6.1-1) ... Selecting previously unselected package python3-gpg. Preparing to unpack .../088-python3-gpg_2.0.0-2+b1_amd64.deb ... Unpacking python3-gpg (2.0.0-2+b1) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../089-python3-pyparsing_3.1.3-1_all.deb ... Unpacking python3-pyparsing (3.1.3-1) ... Selecting previously unselected package python3-httplib2. Preparing to unpack .../090-python3-httplib2_0.22.0-1_all.deb ... Unpacking python3-httplib2 (0.22.0-1) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../091-python3-more-itertools_10.8.0-1_all.deb ... Unpacking python3-more-itertools (10.8.0-1) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../092-python3-typeguard_4.4.4-2_all.deb ... Unpacking python3-typeguard (4.4.4-2) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../093-python3-inflect_7.5.0-1_all.deb ... Unpacking python3-inflect (7.5.0-1) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../094-python3-jaraco.context_6.0.1-2_all.deb ... Unpacking python3-jaraco.context (6.0.1-2) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../095-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-lazr.uri. Preparing to unpack .../096-python3-lazr.uri_1.0.6-7_all.deb ... Unpacking python3-lazr.uri (1.0.6-7) ... Selecting previously unselected package python3-wadllib. Preparing to unpack .../097-python3-wadllib_2.0.0-3_all.deb ... Unpacking python3-wadllib (2.0.0-3) ... Selecting previously unselected package python3-oauthlib. Preparing to unpack .../098-python3-oauthlib_3.3.1-1_all.deb ... Unpacking python3-oauthlib (3.3.1-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../099-python3-pkg-resources_78.1.1-0.1_all.deb ... Unpacking python3-pkg-resources (78.1.1-0.1) ... Selecting previously unselected package python3-lazr.restfulclient. Preparing to unpack .../100-python3-lazr.restfulclient_0.14.6-3_all.deb ... Unpacking python3-lazr.restfulclient (0.14.6-3) ... Selecting previously unselected package python3-launchpadlib. Preparing to unpack .../101-python3-launchpadlib_2.1.0-1_all.deb ... Unpacking python3-launchpadlib (2.1.0-1) ... Selecting previously unselected package python3-sshsig. Preparing to unpack .../102-python3-sshsig_0.2.2-2_all.deb ... Unpacking python3-sshsig (0.2.2-2) ... Selecting previously unselected package systemd-cryptsetup. Preparing to unpack .../103-systemd-cryptsetup_259.1-1_amd64.deb ... Unpacking systemd-cryptsetup (259.1-1) ... Selecting previously unselected package xauth. Preparing to unpack .../104-xauth_1%3a1.1.2-1.1_amd64.deb ... Unpacking xauth (1:1.1.2-1.1) ... Selecting previously unselected package gnupg-utils. Preparing to unpack .../105-gnupg-utils_2.4.8-5_amd64.deb ... Unpacking gnupg-utils (2.4.8-5) ... Setting up media-types (14.0.0) ... Setting up libxau6:amd64 (1:1.0.11-1+b1) ... Setting up libxdmcp6:amd64 (1:1.1.5-2) ... Setting up libnpth0t64:amd64 (1.8-3+b1) ... Setting up libkeyutils1:amd64 (1.6.3-6+b1) ... Setting up libapparmor1:amd64 (4.1.6-2) ... Setting up libxcb1:amd64 (1.17.0-2+b2) ... Setting up libsodium23:amd64 (1.0.18-2) ... Setting up libgpm2:amd64 (1.20.7-12+b1) ... Setting up libgpg-error0:amd64 (1.58-2) ... Setting up libcbor0.10:amd64 (0.10.2-2.1) ... Setting up libyaml-0-2:amd64 (0.2.5-2+b1) ... Setting up libedit2:amd64 (3.1-20251016-1) ... Setting up libsasl2-modules:amd64 (2.1.28+dfsg1-10) ... Setting up libgcrypt20:amd64 (1.11.2-3+b1) ... Setting up systemd (259.1-1) ... Created symlink '/etc/systemd/system/getty.target.wants/getty@tty1.service' → '/usr/lib/systemd/system/getty@.service'. Created symlink '/etc/systemd/system/multi-user.target.wants/remote-fs.target' → '/usr/lib/systemd/system/remote-fs.target'. Created symlink '/etc/systemd/system/sysinit.target.wants/systemd-pstore.service' → '/usr/lib/systemd/system/systemd-pstore.service'. Initializing machine ID from random generator. Creating group 'systemd-journal' with GID 999. Creating group 'systemd-network' with GID 998. Creating user 'systemd-network' (systemd Network Management) with UID 998 and GID 998. [ESC][0;1;39m/usr/lib/tmpfiles.d/legacy.conf:14: Duplicate line for path "/run/lock", ignoring.[ESC][0m [ESC][0;1;31m"/home" already exists and is not a directory.[ESC][0m Setting up krb5-locales (1.22.1-2) ... Setting up libcom-err2:amd64 (1.47.2-3+b8) ... Setting up libldap-common (2.6.10+dfsg-1) ... Setting up libkrb5support0:amd64 (1.22.1-2) ... Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg1-10) ... Setting up linux-sysctl-defaults (4.15) ... Setting up libx11-data (2:1.8.12-1) ... Setting up gnupg-l10n (2.4.8-5) ... Setting up libdbus-1-3:amd64 (1.16.2-3) ... Setting up libunistring5:amd64 (1.3-2+b1) ... Setting up systemd-timesyncd (259.1-1) ... Creating group 'systemd-timesync' with GID 997. Creating user 'systemd-timesync' (systemd Time Synchronization) with UID 997 and GID 997. Created symlink '/etc/systemd/system/dbus-org.freedesktop.timesync1.service' → '/usr/lib/systemd/system/systemd-timesyncd.service'. Created symlink '/etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service' → '/usr/lib/systemd/system/systemd-timesyncd.service'. Setting up libncursesw6:amd64 (6.6+20251231-1) ... Setting up libk5crypto3:amd64 (1.22.1-2) ... Setting up libsasl2-2:amd64 (2.1.28+dfsg1-10) ... Setting up libffi8:amd64 (3.5.2-3+b1) ... Setting up gpgv (2.4.8-5) ... Setting up dbus-session-bus-common (1.16.2-3) ... Setting up libassuan9:amd64 (3.0.2-2+b1) ... Setting up libtasn1-6:amd64 (4.21.0-2) ... Setting up libx11-6:amd64 (2:1.8.12-1+b1) ... Setting up netbase (6.5) ... Setting up libkrb5-3:amd64 (1.22.1-2) ... Setting up lsb-release (12.1-2) ... Setting up dbus-system-bus-common (1.16.2-3) ... Creating group 'messagebus' with GID 996. Creating user 'messagebus' (System Message Bus) with UID 996 and GID 996. Setting up libfido2-1:amd64 (1.16.0-2+b1) ... Setting up openssl (3.5.5-1) ... Setting up libgpg-error-l10n (1.58-2) ... Setting up libjson-c5:amd64 (0.18+ds-2) ... Setting up readline-common (8.3-4) ... Setting up libldap2:amd64 (2.6.10+dfsg-1+b1) ... Setting up libxmuu1:amd64 (2:1.1.3-4) ... Setting up dbus-bin (1.16.2-3) ... Setting up libkmod2:amd64 (34.2-2+b1) ... Setting up libksba8:amd64 (1.6.7-2+b2) ... Setting up pinentry-curses (1.3.2-3) ... Setting up libxext6:amd64 (2:1.3.4-1+b4) ... Setting up libidn2-0:amd64 (2.3.8-4+b1) ... Setting up dbus-daemon (1.16.2-3) ... Setting up ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 150 added, 0 removed; done. Setting up dbus (1.16.2-3) ... invoke-rc.d: could not determine current runlevel invoke-rc.d: policy-rc.d denied execution of start. Setting up libp11-kit0:amd64 (0.25.10-1+b1) ... Setting up libgssapi-krb5-2:amd64 (1.22.1-2) ... Setting up libreadline8t64:amd64 (8.3-4) ... Setting up xauth (1:1.1.2-1.1) ... Setting up gpgconf (2.4.8-5) ... Setting up libpython3.13-stdlib:amd64 (3.13.12-1) ... Setting up gpg (2.4.8-5) ... Created symlink '/etc/systemd/user/sockets.target.wants/keyboxd.socket' → '/usr/lib/systemd/user/keyboxd.socket'. Setting up libpython3-stdlib:amd64 (3.13.9-3) ... Setting up gnupg-utils (2.4.8-5) ... Setting up libpython3.13:amd64 (3.13.12-1) ... Setting up libgnutls30t64:amd64 (3.8.12-2) ... Setting up gpg-agent (2.4.8-5) ... Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket' → '/usr/lib/systemd/user/gpg-agent-browser.socket'. Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket' → '/usr/lib/systemd/user/gpg-agent-extra.socket'. Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket' → '/usr/lib/systemd/user/gpg-agent-ssh.socket'. Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent.socket' → '/usr/lib/systemd/user/gpg-agent.socket'. Setting up python3.13 (3.13.12-1) ... Setting up openssh-client (1:10.2p1-5) ... Creating group '_ssh' with GID 995. Created symlink '/etc/systemd/user/sockets.target.wants/ssh-agent.socket' → '/usr/lib/systemd/user/ssh-agent.socket'. Setting up gpgsm (2.4.8-5) ... Setting up python3 (3.13.9-3) ... Setting up python3-autocommand (2.2.2-4) ... Setting up dirmngr (2.4.8-5) ... Created symlink '/etc/systemd/user/sockets.target.wants/dirmngr.socket' → '/usr/lib/systemd/user/dirmngr.socket'. Setting up python3-chardet (5.2.0+dfsg-2) ... Setting up python3-configobj (5.0.9-1) ... Setting up python3-pyparsing (3.1.3-1) ... Setting up python3-merge3 (0.0.8-1) ... Setting up python3-certifi (2026.1.4+ds-1) ... Setting up python3-idna (3.11-1) ... Setting up python3-wrapt (1.17.3-3) ... Setting up python3-typing-extensions (4.15.0-2) ... Setting up python3-urllib3 (2.6.3-1) ... Setting up python3-patiencediff (0.2.13-1+b5) ... Setting up python3-dulwich (1.0.0-2) ... Setting up gnupg (2.4.8-5) ... Setting up python3-httplib2 (0.22.0-1) ... Setting up python3-tzlocal (5.3.1-2) ... Setting up libgpgme45:amd64 (2.0.1-2) ... Setting up python3-deprecated (1.3.1-1) ... Setting up python3-cffi-backend:amd64 (2.0.0-3) ... Setting up python3-blinker (1.9.0-2) ... Setting up python3-more-itertools (10.8.0-1) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-distro (1.9.0-1) ... Setting up gpg-wks-client (2.4.8-5) ... Setting up python3-jaraco.context (6.0.1-2) ... Setting up python3-jwt (2.10.1-4) ... Setting up python3-fastbencode (0.3.8-1) ... Setting up python3-charset-normalizer (3.4.4-2) ... Setting up python3-bcrypt (5.0.0-3) ... Setting up python3-typeguard (4.4.4-2) ... Setting up python3-fastimport (0.9.14-2.1) ... Setting up python3-yaml (6.0.3-1) ... Setting up python3-breezy (3.3.21-1) ... Setting up python3-lazr.uri (1.0.6-7) ... Setting up brz (3.3.21-1) ... update-alternatives: using /usr/bin/brz to provide /usr/bin/bzr (bzr) in auto mode Setting up python3-inflect (7.5.0-1) ... Setting up python3-gpg (2.0.0-2+b1) ... Setting up python3-cryptography (46.0.5-1) ... Setting up python3-wadllib (2.0.0-3) ... Setting up python3-requests (2.32.5+dfsg-1) ... Setting up python3-nacl (1.5.0-8) ... Setting up python3-pkg-resources (78.1.1-0.1) ... Setting up python3-sshsig (0.2.2-2) ... Setting up python3-github (2.6.1-1) ... Setting up python3-oauthlib (3.3.1-1) ... Setting up python3-lazr.restfulclient (0.14.6-3) ... Setting up python3-launchpadlib (2.1.0-1) ... Created symlink '/etc/systemd/user/timers.target.wants/launchpadlib-cache-clean.timer' → '/usr/lib/systemd/user/launchpadlib-cache-clean.timer'. Setting up dmsetup (2:1.02.205-2+b1) ... Setting up libdevmapper1.02.1:amd64 (2:1.02.205-2+b1) ... Setting up libcryptsetup12:amd64 (2:2.8.4-1) ... Setting up systemd-cryptsetup (259.1-1) ... Processing triggers for libc-bin (2.42-13) ... Processing triggers for ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. 0m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', '-y', 'install', 'brz=3.3.21-1'] 0m42.8s INFO: Running scripts post_install 0m42.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_install_exceptions'] 0m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_install_exceptions'] 0m42.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'systemd-tmpfiles', '--cat-config'] 0m42.8s DUMP: # /usr/lib/tmpfiles.d/20-systemd-osc-context.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. L$ /etc/profile.d/80-systemd-osc-context.sh - - - - /usr/lib/systemd/profile.d/80-systemd-osc-context.sh # /usr/lib/tmpfiles.d/20-systemd-shell-extra.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. L$ /etc/profile.d/70-systemd-shell-extra.sh - - - - /usr/lib/systemd/profile.d/70-systemd-shell-extra.sh # /usr/lib/tmpfiles.d/20-systemd-ssh-generator.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. L$ /etc/ssh/ssh_config.d/20-systemd-ssh-proxy.conf - - - - /usr/lib/systemd/ssh_config.d/20-systemd-ssh-proxy.conf d /run/sshd 0755 # /usr/lib/tmpfiles.d/20-systemd-stub.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Copy systemd-stub provided metadata such as PCR signature and public key file # from initrd into /run/, so that it will survive the initrd stage C /run/systemd/stub/profile 0444 root root - /.extra/profile C /run/systemd/stub/os-release 0444 root root - /.extra/os-release C /run/systemd/tpm2-pcr-signature.json 0444 root root - /.extra/tpm2-pcr-signature.json C /run/systemd/tpm2-pcr-public-key.pem 0444 root root - /.extra/tpm2-pcr-public-key.pem # /usr/lib/tmpfiles.d/credstore.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. d /etc/credstore 0700 root root d /etc/credstore.encrypted 0700 root root z /run/credstore 0700 root root z /run/credstore.encrypted 0700 root root # /usr/lib/tmpfiles.d/dbus.conf # Fields: type; path; mode; uid; gid; age; argument (symlink target) # Make ${localstatedir}/lib/dbus (required for systemd < 237) # Adjust mode and ownership if it already exists. d /var/lib/dbus 0755 - - - # Make ${localstatedir}/lib/dbus/machine-id a symlink to /etc/machine-id # if it does not already exist L /var/lib/dbus/machine-id - - - - /etc/machine-id # /usr/lib/tmpfiles.d/debian.conf # This file is part of the debianisation of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details # Type Path Mode UID GID Age Argument L /run/shm - - - - /dev/shm d /run/sendsigs.omit.d 0755 root root - d /run/lock 1777 root root - - L+ /etc/mtab - - - - ../proc/self/mounts L+ /etc/default/locale - - - - ../locale.conf L+ /etc/vconsole.conf - - - - default/keyboard C! /etc/nsswitch.conf - - - - C! /etc/pam.d - - - - C! /etc/issue - - - - # /usr/lib/tmpfiles.d/home.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. Q /home 0755 - - - q /srv 0755 - - - # /usr/lib/tmpfiles.d/journal-nocow.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Set the NOCOW attribute for directories of journal files. This flag # is inherited by their new files and sub-directories. Matters only # for btrfs filesystems. # # WARNING: Enabling the NOCOW attribute improves journal performance # substantially, but also disables the btrfs checksum logic. In # btrfs RAID filesystems the checksums are needed for rebuilding # corrupted files. Without checksums such rebuilds are not # possible. # # In a single-disk filesystem (or a filesystem without redundancy) # enabling the NOCOW attribute for journal files is safe, because # they have their own checksums and a rebuilding wouldn't be possible # in any case. h /var/log/journal - - - - +C h /var/log/journal/%m - - - - +C h /var/log/journal/remote - - - - +C # /usr/lib/tmpfiles.d/legacy.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # The functionality provided by these files and directories has been replaced # by newer interfaces. Their use is discouraged on legacy-free systems. This # configuration is provided to maintain backward compatibility. d /run/lock 0755 root root - L /var/lock - - - - ../run/lock L$ /var/log/README - - - - ../../usr/share/doc/systemd/README.logs # /run/lock/subsys is used for serializing SysV service execution, and # hence without use on SysV-less systems. d /run/lock/subsys 0755 root root - # /usr/lib/tmpfiles.d/libselinux1.conf # See tmpfiles.d(5) for details # Type Path Mode UID GID Age Argument d /run/setrans 0755 root root - - # /usr/lib/tmpfiles.d/openssh-client.conf x /tmp/ssh-* # /usr/lib/tmpfiles.d/passwd.conf # If a password operation is in progress and we lose power, stale lockfiles # can be left behind. Clear them on boot. r! /etc/gshadow.lock r! /etc/shadow.lock r! /etc/passwd.lock r! /etc/group.lock r! /etc/subuid.lock r! /etc/subgid.lock # /usr/lib/tmpfiles.d/provision.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Provision additional login messages from credentials, if they are set. Note # that these lines are NOPs if the credentials are not set or if the files # already exist. f^ /etc/motd.d/50-provision.conf - - - - login.motd f^ /etc/issue.d/50-provision.conf - - - - login.issue # Provision a /etc/hosts file from credentials. f^ /etc/hosts - - - - network.hosts # Provision SSH key for root d- /root :0700 root :root - d- /root/.ssh :0700 root :root - f^ /root/.ssh/authorized_keys :0600 root :root - ssh.authorized_keys.root # /usr/lib/tmpfiles.d/systemd-network.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. d$ /run/systemd/netif 0755 systemd-network systemd-network - d$ /run/systemd/netif/links 0755 systemd-network systemd-network - d$ /run/systemd/netif/leases 0755 systemd-network systemd-network - d$ /var/lib/systemd/network 0755 systemd-network systemd-network - # /usr/lib/tmpfiles.d/systemd-nologin.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5), systemd-user-sessions.service(8) and pam_nologin(8). f+! /run/nologin 0644 - - - "System is booting up. Unprivileged users are not permitted to log in yet. Please come back later. For technical details, see pam_nologin(8)." # /usr/lib/tmpfiles.d/systemd-pstore.conf # SPDX-License-Identifier: LGPL-2.1-or-later # # The systemd-pstore.service(1) archives the contents of /sys/fs/pstore # upon boot so that there is room for a subsequent dump. This service # is enabled with: # systemctl enable systemd-pstore # # With the service enabled, the kernel still needs to be configured # to write data into the pstore. The kernel has two parameters, # crash_kexec_post_notifiers and printk.always_kmsg_dump, that # control writes into pstore. # # The crash_kexec_post_notifiers parameter enables the kernel to write # dmesg (including stack trace) into pstore upon a panic even if kdump # is loaded, only needed if you want to use pstore with kdump. Without # this parameter, kdump could block writing to pstore for stability # reason. Note this increases the risk of kdump failure even if pstore # is not available. # # The printk.always_kmsg_dump parameter enables the kernel to write dmesg # upon a normal shutdown (shutdown, reboot, halt). # # To configure the kernel parameters, uncomment the appropriate # lines below. The value written is either 'Y' to enable the # kernel parameter, or 'N' to disable the kernel parameter. # # After making a change to this file, do: # systemd-tmpfiles --create path/to/tmpfiles.d/systemd-pstore.conf # # These changes are automatically applied on future re-boots. d /var/lib/systemd/pstore 0755 root root 14d #w- /sys/module/printk/parameters/always_kmsg_dump - - - - Y #w- /sys/module/kernel/parameters/crash_kexec_post_notifiers - - - - Y # /usr/lib/tmpfiles.d/systemd-tmp.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Exclude namespace mountpoints created with PrivateTmp=yes x /tmp/systemd-private-%b-* X /tmp/systemd-private-%b-*/tmp x /var/tmp/systemd-private-%b-* X /var/tmp/systemd-private-%b-*/tmp # Remove top-level private temporary directories on each boot R! /tmp/systemd-private-* R! /var/tmp/systemd-private-* # Handle lost systemd-coredump temp files. They could be lost on old filesystems, # for example, after hard reboot. x /var/lib/systemd/coredump/.#core*.%b* r! /var/lib/systemd/coredump/.#* # /usr/lib/tmpfiles.d/systemd.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. d /run/user 0755 root root - d /run/systemd/ask-password 0755 root root - d$ /run/systemd/seats 0755 root root - d$ /run/systemd/sessions 0755 root root - d$ /run/systemd/users 0755 root root - d /run/systemd/machines 0755 root root - d$ /run/systemd/shutdown 0755 root root - d /run/log 0755 root root - z /run/log/journal 2755 root systemd-journal - - Z /run/log/journal/%m ~2750 root systemd-journal - - a+ /run/log/journal - - - - d:group::r-x,d:group:adm:r-x,group::r-x,group:adm:r-x A+ /run/log/journal/%m - - - - d:group:adm:r-x,group:adm:r-X z /var/log/journal 2755 root systemd-journal - - z /var/log/journal/%m 2755 root systemd-journal - - z /var/log/journal/%m/system.journal 0640 root systemd-journal - - a+ /var/log/journal - - - - d:group::r-x,d:group:adm:r-x,group::r-x,group:adm:r-x a+ /var/log/journal/%m - - - - d:group:adm:r-x,group:adm:r-x a+ /var/log/journal/%m/system.journal - - - - group:adm:r-- d /var/lib/systemd 0755 root root - d /var/lib/systemd/coredump 0755 root root 2w # Files and directories in /var/lib/systemd/ephemeral-trees are locked by pid 1 to prevent tmpfiles from # removing them, and tmpfiles is told to clean up anything in /var/lib/systemd/ephemeral-trees that isn't # locked unconditionally. d /var/lib/systemd/ephemeral-trees 0755 root root 0 d /var/lib/private 0700 root root - d /var/log/private 0700 root root - d /var/cache/private 0700 root root - # /usr/lib/tmpfiles.d/tmp.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Clear tmp directories separately, to make them easier to override q /tmp 1777 root root 10d q /var/tmp 1777 root root 30d # /usr/lib/tmpfiles.d/var.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. q /var 0755 - - - L /var/run - - - - ../run d /var/log 0755 - - - d /var/cache 0755 - - - d /var/lib 0755 - - - d /var/spool 0755 - - - # /usr/lib/tmpfiles.d/x11.conf # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # See tmpfiles.d(5) for details. # Make sure these are created by default so that nobody else can # or empty them at startup D! /tmp/.X11-unix 1777 root root 10d D! /tmp/.ICE-unix 1777 root root 10d D! /tmp/.XIM-unix 1777 root root 10d D! /tmp/.font-unix 1777 root root 10d # Unlink the X11 lock files r! /tmp/.X[0-9]*-lock 0m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'systemd-tmpfiles', '--cat-config'] 0m42.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m43.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m43.8s INFO: IGNORED broken symlink: /etc/vconsole.conf (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m43.8s INFO: IGNORED broken symlink: /etc/default/locale (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m44.6s DEBUG: No broken symlinks as far as we can find. 0m45.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', '-ac', '--ignore-obsolete'] 0m46.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', '-ac', '--ignore-obsolete'] 0m46.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m46.4s DUMP: 0.15.9~deb12u1 0m46.4s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m46.4s INFO: Running adequate version 0.15.9~deb12u1 now. 0m46.4s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'brz'] 0m46.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'brz'] 0m46.5s INFO: Running scripts pre_remove 0m46.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m46.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m46.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m46.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m46.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m48.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m48.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m48.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m48.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_exceptions'] 0m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/pre_remove_exceptions'] 0m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m48.5s DUMP: install ok installed adduser adduser 3.154 install ok installed apt apt 3.1.16 install ok installed base-files base-files 14 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-2 install ok installed brz brz 3.3.21-1 install ok installed bsdutils bsdutils 1:2.41.3-3 install ok installed ca-certificates ca-certificates 20250419 install ok installed coreutils coreutils 9.7-3 install ok installed dash dash 0.5.12-12 install ok installed dbus dbus 1.16.2-3 install ok installed dbus-bin dbus-bin 1.16.2-3 install ok installed dbus-daemon dbus-daemon 1.16.2-3 install ok installed dbus-session-bus-common dbus-session-bus-common 1.16.2-3 install ok installed dbus-system-bus-common dbus-system-bus-common 1.16.2-3 install ok installed debconf debconf 1.5.91 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dirmngr dirmngr 2.4.8-5 install ok installed dmsetup dmsetup 2:1.02.205-2+b1 install ok installed dpkg dpkg 1.23.5 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-14-base:amd64 gcc-14-base 14.3.0-12 install ok installed gcc-15-base:amd64 gcc-15-base 15.2.0-13 install ok installed gnupg gnupg 2.4.8-5 install ok installed gnupg-l10n gnupg-l10n 2.4.8-5 install ok installed gnupg-utils gnupg-utils 2.4.8-5 install ok installed gpg gpg 2.4.8-5 install ok installed gpg-agent gpg-agent 2.4.8-5 install ok installed gpg-wks-client gpg-wks-client 2.4.8-5 install ok installed gpgconf gpgconf 2.4.8-5 install ok installed gpgsm gpgsm 2.4.8-5 install ok installed gpgv gpgv 2.4.8-5 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed krb5-locales krb5-locales 1.22.1-2 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapparmor1:amd64 libapparmor1 4.1.6-2 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.1.16 install ok installed libassuan9:amd64 libassuan9 3.0.2-2+b1 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.41.3-3 install ok installed libbsd0:amd64 libbsd0 0.12.2-2+b1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b1 install ok installed libc-bin libc-bin 2.42-13 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-13 install ok installed libc6:amd64 libc6 2.42-13 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.1-1 install ok installed libcap2:amd64 libcap2 1:2.75-10+b5 install ok installed libcbor0.10:amd64 libcbor0.10 0.10.2-2.1 install ok installed libcom-err2:amd64 libcom-err2 1.47.2-3+b8 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1 install ok installed libcryptsetup12:amd64 libcryptsetup12 2:2.8.4-1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11 install ok installed libdbus-1-3:amd64 libdbus-1-3 1.16.2-3 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.282+b2 install ok installed libdevmapper1.02.1:amd64 libdevmapper1.02.1 2:1.02.205-2+b1 install ok installed libedit2:amd64 libedit2 3.1-20251016-1 install ok installed libexpat1:amd64 libexpat1 2.7.4-1 install ok installed libffi8:amd64 libffi8 3.5.2-3+b1 install ok installed libfido2-1:amd64 libfido2-1 1.16.0-2+b1 install ok installed libgcc-s1:amd64 libgcc-s1 15.2.0-13 install ok installed libgcrypt20:amd64 libgcrypt20 1.11.2-3+b1 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b1 install ok installed libgnutls30t64:amd64 libgnutls30t64 3.8.12-2 install ok installed libgpg-error-l10n libgpg-error-l10n 1.58-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.58-2 install ok installed libgpgme45:amd64 libgpgme45 2.0.1-2 install ok installed libgpm2:amd64 libgpm2 1.20.7-12+b1 install ok installed libgssapi-krb5-2:amd64 libgssapi-krb5-2 1.22.1-2 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1 install ok installed libidn2-0:amd64 libidn2-0 2.3.8-4+b1 install ok installed libjson-c5:amd64 libjson-c5 0.18+ds-2 install ok installed libk5crypto3:amd64 libk5crypto3 1.22.1-2 install ok installed libkeyutils1:amd64 libkeyutils1 1.6.3-6+b1 install ok installed libkmod2:amd64 libkmod2 34.2-2+b1 install ok installed libkrb5-3:amd64 libkrb5-3 1.22.1-2 install ok installed libkrb5support0:amd64 libkrb5support0 1.22.1-2 install ok installed libksba8:amd64 libksba8 1.6.7-2+b2 install ok installed liblastlog2-2:amd64 liblastlog2-2 2.41.3-3 install ok installed libldap-common libldap-common 2.6.10+dfsg-1 install ok installed libldap2:amd64 libldap2 2.6.10+dfsg-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-6 install ok installed liblzma5:amd64 liblzma5 5.8.2-2 install ok installed libmd0:amd64 libmd0 1.1.0-2+b2 install ok installed libmount1:amd64 libmount1 2.41.3-3 install ok installed libncursesw6:amd64 libncursesw6 6.6+20251231-1 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1 install ok installed libnpth0t64:amd64 libnpth0t64 1.8-3+b1 install ok installed libp11-kit0:amd64 libp11-kit0 0.25.10-1+b1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b1 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b1 install ok installed libpython3-stdlib:amd64 libpython3-stdlib 3.13.9-3 install ok installed libpython3.13:amd64 libpython3.13 3.13.12-1 install ok installed libpython3.13-minimal:amd64 libpython3.13-minimal 3.13.12-1 install ok installed libpython3.13-stdlib:amd64 libpython3.13-stdlib 3.13.12-1 install ok installed libreadline8t64:amd64 libreadline8t64 8.3-4 install ok installed libsasl2-2:amd64 libsasl2-2 2.1.28+dfsg1-10 install ok installed libsasl2-modules:amd64 libsasl2-modules 2.1.28+dfsg1-10 install ok installed libsasl2-modules-db:amd64 libsasl2-modules-db 2.1.28+dfsg1-10 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.9-4+b1 install ok installed libsemanage-common libsemanage-common 3.9-1 install ok installed libsemanage2:amd64 libsemanage2 3.9-1+b1 install ok installed libsepol2:amd64 libsepol2 3.9-2 install ok installed libsmartcols1:amd64 libsmartcols1 2.41.3-3 install ok installed libsodium23:amd64 libsodium23 1.0.18-2 install ok installed libsqlite3-0:amd64 libsqlite3-0 3.46.1-9 install ok installed libssl3t64:amd64 libssl3t64 3.5.5-1 install ok installed libstdc++6:amd64 libstdc++6 15.2.0-13 install ok installed libsystemd-shared:amd64 libsystemd-shared 259.1-1 install ok installed libsystemd0:amd64 libsystemd0 259.1-1 install ok installed libtasn1-6:amd64 libtasn1-6 4.21.0-2 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1 install ok installed libudev1:amd64 libudev1 259.1-1 install ok installed libunistring5:amd64 libunistring5 1.3-2+b1 install ok installed libuuid1:amd64 libuuid1 2.41.3-3 install ok installed libx11-6:amd64 libx11-6 2:1.8.12-1+b1 install ok installed libx11-data libx11-data 2:1.8.12-1 install ok installed libxau6:amd64 libxau6 1:1.0.11-1+b1 install ok installed libxcb1:amd64 libxcb1 1.17.0-2+b2 install ok installed libxdmcp6:amd64 libxdmcp6 1:1.1.5-2 install ok installed libxext6:amd64 libxext6 2:1.3.4-1+b4 install ok installed libxmuu1:amd64 libxmuu1 2:1.1.3-4 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b1 install ok installed libyaml-0-2:amd64 libyaml-0-2 0.2.5-2+b1 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b1 install ok installed linux-sysctl-defaults linux-sysctl-defaults 4.15 install ok installed login login 1:4.16.0-2+really2.41.3-3 install ok installed login.defs login.defs 1:4.18.0-2 install ok installed lsb-release lsb-release 12.1-2 install ok installed mawk mawk 1.3.4.20260129-1 install ok installed media-types media-types 14.0.0 install ok installed mount mount 2.41.3-3 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1 install ok installed netbase netbase 6.5 install ok installed openssh-client openssh-client 1:10.2p1-5 install ok installed openssl openssl 3.5.5-1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.5.5-1 install ok installed passwd passwd 1:4.18.0-2 install ok installed perl-base perl-base 5.40.1-7 install ok installed pinentry-curses pinentry-curses 1.3.2-3 install ok installed python3 python3 3.13.9-3 install ok installed python3-autocommand python3-autocommand 2.2.2-4 install ok installed python3-bcrypt python3-bcrypt 5.0.0-3 install ok installed python3-blinker python3-blinker 1.9.0-2 install ok installed python3-breezy python3-breezy 3.3.21-1 install ok installed python3-certifi python3-certifi 2026.1.4+ds-1 install ok installed python3-cffi-backend:amd64 python3-cffi-backend 2.0.0-3 install ok installed python3-chardet python3-chardet 5.2.0+dfsg-2 install ok installed python3-charset-normalizer python3-charset-normalizer 3.4.4-2 install ok installed python3-configobj python3-configobj 5.0.9-1 install ok installed python3-cryptography python3-cryptography 46.0.5-1 install ok installed python3-deprecated python3-deprecated 1.3.1-1 install ok installed python3-distro python3-distro 1.9.0-1 install ok installed python3-dulwich python3-dulwich 1.0.0-2 install ok installed python3-fastbencode python3-fastbencode 0.3.8-1 install ok installed python3-fastimport python3-fastimport 0.9.14-2.1 install ok installed python3-github python3-github 2.6.1-1 install ok installed python3-gpg python3-gpg 2.0.0-2+b1 install ok installed python3-httplib2 python3-httplib2 0.22.0-1 install ok installed python3-idna python3-idna 3.11-1 install ok installed python3-inflect python3-inflect 7.5.0-1 install ok installed python3-jaraco.context python3-jaraco.context 6.0.1-2 install ok installed python3-jaraco.functools python3-jaraco.functools 4.1.0-1 install ok installed python3-jwt python3-jwt 2.10.1-4 install ok installed python3-launchpadlib python3-launchpadlib 2.1.0-1 install ok installed python3-lazr.restfulclient python3-lazr.restfulclient 0.14.6-3 install ok installed python3-lazr.uri python3-lazr.uri 1.0.6-7 install ok installed python3-merge3 python3-merge3 0.0.8-1 install ok installed python3-minimal python3-minimal 3.13.9-3 install ok installed python3-more-itertools python3-more-itertools 10.8.0-1 install ok installed python3-nacl python3-nacl 1.5.0-8 install ok installed python3-oauthlib python3-oauthlib 3.3.1-1 install ok installed python3-patiencediff python3-patiencediff 0.2.13-1+b5 install ok installed python3-pkg-resources python3-pkg-resources 78.1.1-0.1 install ok installed python3-pyparsing python3-pyparsing 3.1.3-1 install ok installed python3-requests python3-requests 2.32.5+dfsg-1 install ok installed python3-sshsig python3-sshsig 0.2.2-2 install ok installed python3-typeguard python3-typeguard 4.4.4-2 install ok installed python3-typing-extensions python3-typing-extensions 4.15.0-2 install ok installed python3-tzlocal python3-tzlocal 5.3.1-2 install ok installed python3-urllib3 python3-urllib3 2.6.3-1 install ok installed python3-wadllib python3-wadllib 2.0.0-3 install ok installed python3-wrapt python3-wrapt 1.17.3-3 install ok installed python3-yaml python3-yaml 6.0.3-1 install ok installed python3.13 python3.13 3.13.12-1 install ok installed python3.13-minimal python3.13-minimal 3.13.12-1 install ok installed readline-common readline-common 8.3-4 install ok installed sed sed 4.9-2 install ok installed sqv sqv 1.3.0-5 install ok installed systemd systemd 259.1-1 install ok installed systemd-cryptsetup systemd-cryptsetup 259.1-1 install ok installed systemd-timesyncd systemd-timesyncd 259.1-1 install ok installed sysvinit-utils sysvinit-utils 3.15-6 install ok installed tar tar 1.35+dfsg-3.1 install ok installed tzdata tzdata 2025c-3 install ok installed util-linux util-linux 2.41.3-3 install ok installed util-linux-extra util-linux-extra 2.41.3-3 install ok installed xauth xauth 1:1.1.2-1.1 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.1-3 0m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'remove', '--allow-remove-essential', 'adduser', 'ca-certificates', 'dbus', 'dbus-bin', 'dbus-daemon', 'dbus-session-bus-common', 'dbus-system-bus-common', 'dirmngr', 'dmsetup', 'gnupg', 'gnupg-l10n', 'gnupg-utils', 'gpg', 'gpg-agent', 'gpg-wks-client', 'gpgconf', 'gpgsm', 'gpgv', 'krb5-locales', 'libapparmor1:amd64', 'libassuan9:amd64', 'libcbor0.10:amd64', 'libcom-err2:amd64', 'libcryptsetup12:amd64', 'libdbus-1-3:amd64', 'libdevmapper1.02.1:amd64', 'libedit2:amd64', 'libexpat1:amd64', 'libffi8:amd64', 'libfido2-1:amd64', 'libgcrypt20:amd64', 'libgnutls30t64:amd64', 'libgpg-error-l10n', 'libgpg-error0:amd64', 'libgpgme45:amd64', 'libgpm2:amd64', 'libgssapi-krb5-2:amd64', 'libidn2-0:amd64', 'libjson-c5:amd64', 'libk5crypto3:amd64', 'libkeyutils1:amd64', 'libkmod2:amd64', 'libkrb5-3:amd64', 'libkrb5support0:amd64', 'libksba8:amd64', 'libldap-common', 'libldap2:amd64', 'libncursesw6:amd64', 'libnpth0t64:amd64', 'libp11-kit0:amd64', 'libpython3-stdlib:amd64', 'libpython3.13:amd64', 'libpython3.13-minimal:amd64', 'libpython3.13-stdlib:amd64', 'libreadline8t64:amd64', 'libsasl2-2:amd64', 'libsasl2-modules:amd64', 'libsasl2-modules-db:amd64', 'libsodium23:amd64', 'libsystemd-shared:amd64', 'libtasn1-6:amd64', 'libunistring5:amd64', 'libx11-6:amd64', 'libx11-data', 'libxau6:amd64', 'libxcb1:amd64', 'libxdmcp6:amd64', 'libxext6:amd64', 'libxmuu1:amd64', 'libyaml-0-2:amd64', 'linux-sysctl-defaults', 'lsb-release', 'media-types', 'netbase', 'openssh-client', 'openssl', 'pinentry-curses', 'python3', 'python3-autocommand', 'python3-bcrypt', 'python3-blinker', 'python3-breezy', 'python3-certifi', 'python3-cffi-backend:amd64', 'python3-chardet', 'python3-charset-normalizer', 'python3-configobj', 'python3-cryptography', 'python3-deprecated', 'python3-distro', 'python3-dulwich', 'python3-fastbencode', 'python3-fastimport', 'python3-github', 'python3-gpg', 'python3-httplib2', 'python3-idna', 'python3-inflect', 'python3-jaraco.context', 'python3-jaraco.functools', 'python3-jwt', 'python3-launchpadlib', 'python3-lazr.restfulclient', 'python3-lazr.uri', 'python3-merge3', 'python3-minimal', 'python3-more-itertools', 'python3-nacl', 'python3-oauthlib', 'python3-patiencediff', 'python3-pkg-resources', 'python3-pyparsing', 'python3-requests', 'python3-sshsig', 'python3-typeguard', 'python3-typing-extensions', 'python3-tzlocal', 'python3-urllib3', 'python3-wadllib', 'python3-wrapt', 'python3-yaml', 'python3.13', 'python3.13-minimal', 'readline-common', 'systemd', 'systemd-cryptsetup', 'systemd-timesyncd', 'xauth', 'brz'] 0m54.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following packages will be REMOVED: adduser brz ca-certificates dbus dbus-bin dbus-daemon dbus-session-bus-common dbus-system-bus-common dirmngr dmsetup gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpgconf gpgsm gpgv krb5-locales libapparmor1 libassuan9 libcbor0.10 libcom-err2 libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libedit2 libexpat1 libffi8 libfido2-1 libgcrypt20 libgnutls30t64 libgpg-error-l10n libgpg-error0 libgpgme45 libgpm2 libgssapi-krb5-2 libidn2-0 libjson-c5 libk5crypto3 libkeyutils1 libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-common libldap2 libncursesw6 libnpth0t64 libp11-kit0 libpython3-stdlib libpython3.13 libpython3.13-minimal libpython3.13-stdlib libreadline8t64 libsasl2-2 libsasl2-modules libsasl2-modules-db libsodium23 libsystemd-shared libtasn1-6 libunistring5 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 libyaml-0-2 linux-sysctl-defaults lsb-release media-types netbase openssh-client openssl pinentry-curses python3 python3-autocommand python3-bcrypt python3-blinker python3-breezy python3-certifi python3-cffi-backend python3-chardet python3-charset-normalizer python3-configobj python3-cryptography python3-deprecated python3-distro python3-dulwich python3-fastbencode python3-fastimport python3-github python3-gpg python3-httplib2 python3-idna python3-inflect python3-jaraco.context python3-jaraco.functools python3-jwt python3-launchpadlib python3-lazr.restfulclient python3-lazr.uri python3-merge3 python3-minimal python3-more-itertools python3-nacl python3-oauthlib python3-patiencediff python3-pkg-resources python3-pyparsing python3-requests python3-sshsig python3-typeguard python3-typing-extensions python3-tzlocal python3-urllib3 python3-wadllib python3-wrapt python3-yaml python3.13 python3.13-minimal readline-common systemd systemd-cryptsetup systemd-timesyncd xauth 0 upgraded, 0 newly installed, 129 to remove and 0 not upgraded. After this operation, 145 MB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10977 files and directories currently installed.) Removing python3-gpg (2.0.0-2+b1) ... Removing libgpgme45:amd64 (2.0.1-2) ... Removing gnupg (2.4.8-5) ... Removing gpg-wks-client (2.4.8-5) ... Removing dirmngr (2.4.8-5) ... Removing dbus (1.16.2-3) ... invoke-rc.d: could not determine current runlevel invoke-rc.d: policy-rc.d denied execution of stop. Removing dbus-system-bus-common (1.16.2-3) ... Removing adduser (3.154) ... Removing brz (3.3.21-1) ... Removing python3-github (2.6.1-1) ... Removing python3-requests (2.32.5+dfsg-1) ... Removing python3-launchpadlib (2.1.0-1) ... Removing dbus-daemon (1.16.2-3) ... Removing dbus-bin (1.16.2-3) ... Removing dbus-session-bus-common (1.16.2-3) ... Removing systemd-cryptsetup (259.1-1) ... Removing libcryptsetup12:amd64 (2:2.8.4-1) ... Removing gnupg-l10n (2.4.8-5) ... Removing gnupg-utils (2.4.8-5) ... Removing gpg (2.4.8-5) ... Removing gpg-agent (2.4.8-5) ... Removing gpgsm (2.4.8-5) ... Removing gpgconf (2.4.8-5) ... Removing gpgv (2.4.8-5) ... Removing krb5-locales (1.22.1-2) ... Removing libapparmor1:amd64 (4.1.6-2) ... Removing pinentry-curses (1.3.2-3) ... Removing libassuan9:amd64 (3.0.2-2+b1) ... Removing openssh-client (1:10.2p1-5) ... Removing libfido2-1:amd64 (1.16.0-2+b1) ... Removing libcbor0.10:amd64 (0.10.2-2.1) ... Removing libgssapi-krb5-2:amd64 (1.22.1-2) ... Removing libkrb5-3:amd64 (1.22.1-2) ... Removing libcom-err2:amd64 (1.47.2-3+b8) ... Removing libdbus-1-3:amd64 (1.16.2-3) ... Removing libedit2:amd64 (3.1-20251016-1) ... Removing python3-breezy (3.3.21-1) ... Removing python3-yaml (6.0.3-1) ... Removing python3-lazr.restfulclient (0.14.6-3) ... Removing python3-pkg-resources (78.1.1-0.1) ... Removing python3-sshsig (0.2.2-2) ... Removing python3-oauthlib (3.3.1-1) ... Removing python3-cryptography (46.0.5-1) ... Removing python3-deprecated (1.3.1-1) ... Removing python3-wrapt (1.17.3-3) ... Removing python3-wadllib (2.0.0-3) ... Removing python3-dulwich (1.0.0-2) ... Removing libpython3.13:amd64 (3.13.12-1) ... Removing python3-nacl (1.5.0-8) ... Removing python3-cffi-backend:amd64 (2.0.0-3) ... Removing libgcrypt20:amd64 (1.11.2-3+b1) ... Removing libgnutls30t64:amd64 (3.8.12-2) ... Removing libgpg-error-l10n (1.58-2) ... Removing libksba8:amd64 (1.6.7-2+b2) ... Removing libgpg-error0:amd64 (1.58-2) ... Removing libgpm2:amd64 (1.20.7-12+b1) ... Removing libidn2-0:amd64 (2.3.8-4+b1) ... Removing libjson-c5:amd64 (0.18+ds-2) ... Removing libk5crypto3:amd64 (1.22.1-2) ... Removing libkeyutils1:amd64 (1.6.3-6+b1) ... Removing libkmod2:amd64 (34.2-2+b1) ... Removing libkrb5support0:amd64 (1.22.1-2) ... Removing libldap-common (2.6.10+dfsg-1) ... Removing libldap2:amd64 (2.6.10+dfsg-1+b1) ... Removing libnpth0t64:amd64 (1.8-3+b1) ... Removing libp11-kit0:amd64 (0.25.10-1+b1) ... Removing libsasl2-2:amd64 (2.1.28+dfsg1-10) ... Removing libsasl2-modules:amd64 (2.1.28+dfsg1-10) ... Removing libsasl2-modules-db:amd64 (2.1.28+dfsg1-10) ... Removing libsodium23:amd64 (1.0.18-2) ... Removing systemd-timesyncd (259.1-1) ... Removing systemd (259.1-1) ... Removing libsystemd-shared:amd64 (259.1-1) ... Removing libtasn1-6:amd64 (4.21.0-2) ... Removing libunistring5:amd64 (1.3-2+b1) ... Removing xauth (1:1.1.2-1.1) ... Removing libxmuu1:amd64 (2:1.1.3-4) ... Removing libxext6:amd64 (2:1.3.4-1+b4) ... Removing libyaml-0-2:amd64 (0.2.5-2+b1) ... Removing linux-sysctl-defaults (4.15) ... Removing python3-distro (1.9.0-1) ... Removing lsb-release (12.1-2) ... Removing python3-autocommand (2.2.2-4) ... Removing python3-bcrypt (5.0.0-3) ... Removing python3-blinker (1.9.0-2) ... Removing python3-certifi (2026.1.4+ds-1) ... Removing python3-chardet (5.2.0+dfsg-2) ... Removing python3-charset-normalizer (3.4.4-2) ... Removing python3-configobj (5.0.9-1) ... Removing python3-fastbencode (0.3.8-1) ... Removing python3-fastimport (0.9.14-2.1) ... Removing python3-idna (3.11-1) ... Removing python3-inflect (7.5.0-1) ... Removing python3-jaraco.context (6.0.1-2) ... Removing python3-jaraco.functools (4.1.0-1) ... Removing python3-jwt (2.10.1-4) ... Removing python3-lazr.uri (1.0.6-7) ... Removing python3-merge3 (0.0.8-1) ... Removing python3-more-itertools (10.8.0-1) ... Removing python3-patiencediff (0.2.13-1+b5) ... Removing python3-typeguard (4.4.4-2) ... Removing python3-typing-extensions (4.15.0-2) ... Removing python3-tzlocal (5.3.1-2) ... Removing python3-urllib3 (2.6.3-1) ... Removing python3-httplib2 (0.22.0-1) ... Removing ca-certificates (20250419) ... Removing dangling symlinks from /etc/ssl/certs... done. Removing libx11-6:amd64 (2:1.8.12-1+b1) ... Removing libx11-data (2:1.8.12-1) ... Removing libxcb1:amd64 (1.17.0-2+b2) ... Removing libxau6:amd64 (1:1.0.11-1+b1) ... Removing libxdmcp6:amd64 (1:1.1.5-2) ... Removing openssl (3.5.5-1) ... Removing python3-pyparsing (3.1.3-1) ... Removing python3 (3.13.9-3) ... Removing python3.13 (3.13.12-1) ... Removing python3-minimal (3.13.9-3) ... Removing python3.13-minimal (3.13.12-1) ... Removing libexpat1:amd64 (2.7.4-1) ... Removing libpython3-stdlib:amd64 (3.13.9-3) ... Removing libpython3.13-stdlib:amd64 (3.13.12-1) ... find: '/usr/lib/python3': No such file or directory Removing libffi8:amd64 (3.5.2-3+b1) ... Removing libncursesw6:amd64 (6.6+20251231-1) ... Removing libpython3.13-minimal:amd64 (3.13.12-1) ... find: '/usr/lib/python3': No such file or directory Removing libreadline8t64:amd64 (8.3-4) ... Removing 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Removing 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Removing 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Removing 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Removing media-types (14.0.0) ... Removing netbase (6.5) ... Removing readline-common (8.3-4) ... Removing libdevmapper1.02.1:amd64 (2:1.02.205-2+b1) ... Removing dmsetup (2:1.02.205-2+b1) ... Processing triggers for libc-bin (2.42-13) ... 0m54.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'remove', '--allow-remove-essential', 'adduser', 'ca-certificates', 'dbus', 'dbus-bin', 'dbus-daemon', 'dbus-session-bus-common', 'dbus-system-bus-common', 'dirmngr', 'dmsetup', 'gnupg', 'gnupg-l10n', 'gnupg-utils', 'gpg', 'gpg-agent', 'gpg-wks-client', 'gpgconf', 'gpgsm', 'gpgv', 'krb5-locales', 'libapparmor1:amd64', 'libassuan9:amd64', 'libcbor0.10:amd64', 'libcom-err2:amd64', 'libcryptsetup12:amd64', 'libdbus-1-3:amd64', 'libdevmapper1.02.1:amd64', 'libedit2:amd64', 'libexpat1:amd64', 'libffi8:amd64', 'libfido2-1:amd64', 'libgcrypt20:amd64', 'libgnutls30t64:amd64', 'libgpg-error-l10n', 'libgpg-error0:amd64', 'libgpgme45:amd64', 'libgpm2:amd64', 'libgssapi-krb5-2:amd64', 'libidn2-0:amd64', 'libjson-c5:amd64', 'libk5crypto3:amd64', 'libkeyutils1:amd64', 'libkmod2:amd64', 'libkrb5-3:amd64', 'libkrb5support0:amd64', 'libksba8:amd64', 'libldap-common', 'libldap2:amd64', 'libncursesw6:amd64', 'libnpth0t64:amd64', 'libp11-kit0:amd64', 'libpython3-stdlib:amd64', 'libpython3.13:amd64', 'libpython3.13-minimal:amd64', 'libpython3.13-stdlib:amd64', 'libreadline8t64:amd64', 'libsasl2-2:amd64', 'libsasl2-modules:amd64', 'libsasl2-modules-db:amd64', 'libsodium23:amd64', 'libsystemd-shared:amd64', 'libtasn1-6:amd64', 'libunistring5:amd64', 'libx11-6:amd64', 'libx11-data', 'libxau6:amd64', 'libxcb1:amd64', 'libxdmcp6:amd64', 'libxext6:amd64', 'libxmuu1:amd64', 'libyaml-0-2:amd64', 'linux-sysctl-defaults', 'lsb-release', 'media-types', 'netbase', 'openssh-client', 'openssl', 'pinentry-curses', 'python3', 'python3-autocommand', 'python3-bcrypt', 'python3-blinker', 'python3-breezy', 'python3-certifi', 'python3-cffi-backend:amd64', 'python3-chardet', 'python3-charset-normalizer', 'python3-configobj', 'python3-cryptography', 'python3-deprecated', 'python3-distro', 'python3-dulwich', 'python3-fastbencode', 'python3-fastimport', 'python3-github', 'python3-gpg', 'python3-httplib2', 'python3-idna', 'python3-inflect', 'python3-jaraco.context', 'python3-jaraco.functools', 'python3-jwt', 'python3-launchpadlib', 'python3-lazr.restfulclient', 'python3-lazr.uri', 'python3-merge3', 'python3-minimal', 'python3-more-itertools', 'python3-nacl', 'python3-oauthlib', 'python3-patiencediff', 'python3-pkg-resources', 'python3-pyparsing', 'python3-requests', 'python3-sshsig', 'python3-typeguard', 'python3-typing-extensions', 'python3-tzlocal', 'python3-urllib3', 'python3-wadllib', 'python3-wrapt', 'python3-yaml', 'python3.13', 'python3.13-minimal', 'readline-common', 'systemd', 'systemd-cryptsetup', 'systemd-timesyncd', 'xauth', 'brz'] 0m54.6s INFO: Running scripts post_remove 0m54.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_remove_exceptions'] 0m54.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_remove_exceptions'] 0m54.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', 'adduser', 'ca-certificates', 'dbus', 'dbus-bin', 'dbus-daemon', 'dbus-session-bus-common', 'dbus-system-bus-common', 'dirmngr', 'dmsetup', 'gnupg', 'gnupg-l10n', 'gnupg-utils', 'gpg', 'gpg-agent', 'gpg-wks-client', 'gpgconf', 'gpgsm', 'gpgv', 'krb5-locales', 'libapparmor1:amd64', 'libassuan9:amd64', 'libcbor0.10:amd64', 'libcom-err2:amd64', 'libcryptsetup12:amd64', 'libdbus-1-3:amd64', 'libdevmapper1.02.1:amd64', 'libedit2:amd64', 'libexpat1:amd64', 'libffi8:amd64', 'libfido2-1:amd64', 'libgcrypt20:amd64', 'libgnutls30t64:amd64', 'libgpg-error-l10n', 'libgpg-error0:amd64', 'libgpgme45:amd64', 'libgpm2:amd64', 'libgssapi-krb5-2:amd64', 'libidn2-0:amd64', 'libjson-c5:amd64', 'libk5crypto3:amd64', 'libkeyutils1:amd64', 'libkmod2:amd64', 'libkrb5-3:amd64', 'libkrb5support0:amd64', 'libksba8:amd64', 'libldap-common', 'libldap2:amd64', 'libncursesw6:amd64', 'libnpth0t64:amd64', 'libp11-kit0:amd64', 'libpython3-stdlib:amd64', 'libpython3.13:amd64', 'libpython3.13-minimal:amd64', 'libpython3.13-stdlib:amd64', 'libreadline8t64:amd64', 'libsasl2-2:amd64', 'libsasl2-modules:amd64', 'libsasl2-modules-db:amd64', 'libsodium23:amd64', 'libsystemd-shared:amd64', 'libtasn1-6:amd64', 'libunistring5:amd64', 'libx11-6:amd64', 'libx11-data', 'libxau6:amd64', 'libxcb1:amd64', 'libxdmcp6:amd64', 'libxext6:amd64', 'libxmuu1:amd64', 'libyaml-0-2:amd64', 'linux-sysctl-defaults', 'lsb-release', 'media-types', 'netbase', 'openssh-client', 'openssl', 'pinentry-curses', 'python3', 'python3-autocommand', 'python3-bcrypt', 'python3-blinker', 'python3-breezy', 'python3-certifi', 'python3-cffi-backend:amd64', 'python3-chardet', 'python3-charset-normalizer', 'python3-configobj', 'python3-cryptography', 'python3-deprecated', 'python3-distro', 'python3-dulwich', 'python3-fastbencode', 'python3-fastimport', 'python3-github', 'python3-gpg', 'python3-httplib2', 'python3-idna', 'python3-inflect', 'python3-jaraco.context', 'python3-jaraco.functools', 'python3-jwt', 'python3-launchpadlib', 'python3-lazr.restfulclient', 'python3-lazr.uri', 'python3-merge3', 'python3-minimal', 'python3-more-itertools', 'python3-nacl', 'python3-oauthlib', 'python3-patiencediff', 'python3-pkg-resources', 'python3-pyparsing', 'python3-requests', 'python3-sshsig', 'python3-typeguard', 'python3-typing-extensions', 'python3-tzlocal', 'python3-urllib3', 'python3-wadllib', 'python3-wrapt', 'python3-yaml', 'python3.13', 'python3.13-minimal', 'readline-common', 'systemd', 'systemd-cryptsetup', 'systemd-timesyncd', 'xauth'] 0m55.3s DUMP: (Reading database ... 5075 files and directories currently installed.) Purging configuration files for adduser (3.154) ... Purging configuration files for ca-certificates (20250419) ... Removing dangling symlinks from /etc/ssl/certs... done. Purging configuration files for dbus (1.16.2-3) ... rmdir: failed to remove '/var/run/dbus': No such file or directory rmdir: failed to remove '/var/lib/dbus': Directory not empty dpkg: warning: while removing dbus, directory '/var/lib/dbus' not empty so not removed dpkg: warning: ignoring request to remove dbus-bin which is not installed Purging configuration files for dbus-daemon (1.16.2-3) ... dpkg: warning: ignoring request to remove dbus-session-bus-common which is not installed dpkg: warning: ignoring request to remove dbus-system-bus-common which is not installed Purging configuration files for dirmngr (2.4.8-5) ... dpkg: warning: ignoring request to remove dmsetup which is not installed dpkg: warning: ignoring request to remove gnupg which is not installed dpkg: warning: ignoring request to remove gnupg-l10n which is not installed dpkg: warning: ignoring request to remove gnupg-utils which is not installed Purging configuration files for gpg (2.4.8-5) ... Purging configuration files for gpg-agent (2.4.8-5) ... dpkg: warning: ignoring request to remove gpg-wks-client which is not installed dpkg: warning: ignoring request to remove gpgconf which is not installed dpkg: warning: ignoring request to remove gpgsm which is not installed dpkg: warning: ignoring request to remove gpgv which is not installed dpkg: warning: ignoring request to remove krb5-locales which is not installed dpkg: warning: ignoring request to remove libapparmor1 which is not installed dpkg: warning: ignoring request to remove libassuan9 which is not installed dpkg: warning: ignoring request to remove libcbor0.10 which is not installed dpkg: warning: ignoring request to remove libcom-err2 which is not installed dpkg: warning: ignoring request to remove libcryptsetup12 which is not installed dpkg: warning: ignoring request to remove libdbus-1-3 which is not installed dpkg: warning: ignoring request to remove libdevmapper1.02.1 which is not installed dpkg: warning: ignoring request to remove libedit2 which is not installed dpkg: warning: ignoring request to remove libexpat1 which is not installed dpkg: warning: ignoring request to remove libffi8 which is not installed dpkg: warning: ignoring request to remove libfido2-1 which is not installed dpkg: warning: ignoring request to remove libgcrypt20 which is not installed dpkg: warning: ignoring request to remove libgnutls30t64 which is not installed dpkg: warning: ignoring request to remove libgpg-error-l10n which is not installed dpkg: warning: ignoring request to remove libgpg-error0 which is not installed dpkg: warning: ignoring request to remove libgpgme45 which is not installed dpkg: warning: ignoring request to remove libgpm2 which is not installed Purging configuration files for libgssapi-krb5-2:amd64 (1.22.1-2) ... dpkg: warning: ignoring request to remove libidn2-0 which is not installed dpkg: warning: ignoring request to remove libjson-c5 which is not installed dpkg: warning: ignoring request to remove libk5crypto3 which is not installed dpkg: warning: ignoring request to remove libkeyutils1 which is not installed dpkg: warning: ignoring request to remove libkmod2 which is not installed dpkg: warning: ignoring request to remove libkrb5-3 which is not installed dpkg: warning: ignoring request to remove libkrb5support0 which is not installed dpkg: warning: ignoring request to remove libksba8 which is not installed Purging configuration files for libldap-common (2.6.10+dfsg-1) ... dpkg: warning: ignoring request to remove libldap2 which is not installed dpkg: warning: ignoring request to remove libncursesw6 which is not installed dpkg: warning: ignoring request to remove libnpth0t64 which is not installed dpkg: warning: ignoring request to remove libp11-kit0 which is not installed dpkg: warning: ignoring request to remove libpython3-stdlib which is not installed dpkg: warning: ignoring request to remove libpython3.13 which is not installed Purging configuration files for libpython3.13-minimal:amd64 (3.13.12-1) ... dpkg: warning: ignoring request to remove libpython3.13-stdlib which is not installed Purging configuration files for libreadline8t64:amd64 (8.3-4) ... dpkg: warning: ignoring request to remove libsasl2-2 which is not installed Purging configuration files for libsasl2-modules:amd64 (2.1.28+dfsg1-10) ... dpkg: warning: ignoring request to remove libsasl2-modules-db which is not installed dpkg: warning: ignoring request to remove libsodium23 which is not installed dpkg: warning: ignoring request to remove libsystemd-shared which is not installed dpkg: warning: ignoring request to remove libtasn1-6 which is not installed dpkg: warning: ignoring request to remove libunistring5 which is not installed dpkg: warning: ignoring request to remove libx11-6 which is not installed dpkg: warning: ignoring request to remove libx11-data which is not installed dpkg: warning: ignoring request to remove libxau6 which is not installed dpkg: warning: ignoring request to remove libxcb1 which is not installed dpkg: warning: ignoring request to remove libxdmcp6 which is not installed dpkg: warning: ignoring request to remove libxext6 which is not installed dpkg: warning: ignoring request to remove libxmuu1 which is not installed dpkg: warning: ignoring request to remove libyaml-0-2 which is not installed dpkg: warning: ignoring request to remove linux-sysctl-defaults which is not installed dpkg: warning: ignoring request to remove lsb-release which is not installed Purging configuration files for media-types (14.0.0) ... Purging configuration files for netbase (6.5) ... Purging configuration files for openssh-client (1:10.2p1-5) ... Purging configuration files for openssl (3.5.5-1) ... dpkg: warning: ignoring request to remove pinentry-curses which is not installed Purging configuration files for python3 (3.13.9-3) ... dpkg: warning: ignoring request to remove python3-autocommand which is not installed dpkg: warning: ignoring request to remove python3-bcrypt which is not installed dpkg: warning: ignoring request to remove python3-blinker which is not installed dpkg: warning: ignoring request to remove python3-breezy which is not installed dpkg: warning: ignoring request to remove python3-certifi which is not installed dpkg: warning: ignoring request to remove python3-cffi-backend which is not installed dpkg: warning: ignoring request to remove python3-chardet which is not installed dpkg: warning: ignoring request to remove python3-charset-normalizer which is not installed dpkg: warning: ignoring request to remove python3-configobj which is not installed dpkg: warning: ignoring request to remove python3-cryptography which is not installed dpkg: warning: ignoring request to remove python3-deprecated which is not installed dpkg: warning: ignoring request to remove python3-distro which is not installed dpkg: warning: ignoring request to remove python3-dulwich which is not installed dpkg: warning: ignoring request to remove python3-fastbencode which is not installed dpkg: warning: ignoring request to remove python3-fastimport which is not installed dpkg: warning: ignoring request to remove python3-github which is not installed dpkg: warning: ignoring request to remove python3-gpg which is not installed dpkg: warning: ignoring request to remove python3-httplib2 which is not installed dpkg: warning: ignoring request to remove python3-idna which is not installed dpkg: warning: ignoring request to remove python3-inflect which is not installed dpkg: warning: ignoring request to remove python3-jaraco.context which is not installed dpkg: warning: ignoring request to remove python3-jaraco.functools which is not installed dpkg: warning: ignoring request to remove python3-jwt which is not installed Purging configuration files for python3-launchpadlib (2.1.0-1) ... dpkg: warning: ignoring request to remove python3-lazr.restfulclient which is not installed dpkg: warning: ignoring request to remove python3-lazr.uri which is not installed dpkg: warning: ignoring request to remove python3-merge3 which is not installed dpkg: warning: ignoring request to remove python3-minimal which is not installed dpkg: warning: ignoring request to remove python3-more-itertools which is not installed dpkg: warning: ignoring request to remove python3-nacl which is not installed dpkg: warning: ignoring request to remove python3-oauthlib which is not installed dpkg: warning: ignoring request to remove python3-patiencediff which is not installed dpkg: warning: ignoring request to remove python3-pkg-resources which is not installed dpkg: warning: ignoring request to remove python3-pyparsing which is not installed dpkg: warning: ignoring request to remove python3-requests which is not installed dpkg: warning: ignoring request to remove python3-sshsig which is not installed dpkg: warning: ignoring request to remove python3-typeguard which is not installed dpkg: warning: ignoring request to remove python3-typing-extensions which is not installed dpkg: warning: ignoring request to remove python3-tzlocal which is not installed dpkg: warning: ignoring request to remove python3-urllib3 which is not installed dpkg: warning: ignoring request to remove python3-wadllib which is not installed dpkg: warning: ignoring request to remove python3-wrapt which is not installed dpkg: warning: ignoring request to remove python3-yaml which is not installed dpkg: warning: ignoring request to remove python3.13 which is not installed Purging configuration files for python3.13-minimal (3.13.12-1) ... Purging configuration files for readline-common (8.3-4) ... Purging configuration files for systemd (259.1-1) ... dpkg: warning: ignoring request to remove systemd-cryptsetup which is not installed Purging configuration files for systemd-timesyncd (259.1-1) ... dpkg: warning: ignoring request to remove xauth which is not installed 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', 'adduser', 'ca-certificates', 'dbus', 'dbus-bin', 'dbus-daemon', 'dbus-session-bus-common', 'dbus-system-bus-common', 'dirmngr', 'dmsetup', 'gnupg', 'gnupg-l10n', 'gnupg-utils', 'gpg', 'gpg-agent', 'gpg-wks-client', 'gpgconf', 'gpgsm', 'gpgv', 'krb5-locales', 'libapparmor1:amd64', 'libassuan9:amd64', 'libcbor0.10:amd64', 'libcom-err2:amd64', 'libcryptsetup12:amd64', 'libdbus-1-3:amd64', 'libdevmapper1.02.1:amd64', 'libedit2:amd64', 'libexpat1:amd64', 'libffi8:amd64', 'libfido2-1:amd64', 'libgcrypt20:amd64', 'libgnutls30t64:amd64', 'libgpg-error-l10n', 'libgpg-error0:amd64', 'libgpgme45:amd64', 'libgpm2:amd64', 'libgssapi-krb5-2:amd64', 'libidn2-0:amd64', 'libjson-c5:amd64', 'libk5crypto3:amd64', 'libkeyutils1:amd64', 'libkmod2:amd64', 'libkrb5-3:amd64', 'libkrb5support0:amd64', 'libksba8:amd64', 'libldap-common', 'libldap2:amd64', 'libncursesw6:amd64', 'libnpth0t64:amd64', 'libp11-kit0:amd64', 'libpython3-stdlib:amd64', 'libpython3.13:amd64', 'libpython3.13-minimal:amd64', 'libpython3.13-stdlib:amd64', 'libreadline8t64:amd64', 'libsasl2-2:amd64', 'libsasl2-modules:amd64', 'libsasl2-modules-db:amd64', 'libsodium23:amd64', 'libsystemd-shared:amd64', 'libtasn1-6:amd64', 'libunistring5:amd64', 'libx11-6:amd64', 'libx11-data', 'libxau6:amd64', 'libxcb1:amd64', 'libxdmcp6:amd64', 'libxext6:amd64', 'libxmuu1:amd64', 'libyaml-0-2:amd64', 'linux-sysctl-defaults', 'lsb-release', 'media-types', 'netbase', 'openssh-client', 'openssl', 'pinentry-curses', 'python3', 'python3-autocommand', 'python3-bcrypt', 'python3-blinker', 'python3-breezy', 'python3-certifi', 'python3-cffi-backend:amd64', 'python3-chardet', 'python3-charset-normalizer', 'python3-configobj', 'python3-cryptography', 'python3-deprecated', 'python3-distro', 'python3-dulwich', 'python3-fastbencode', 'python3-fastimport', 'python3-github', 'python3-gpg', 'python3-httplib2', 'python3-idna', 'python3-inflect', 'python3-jaraco.context', 'python3-jaraco.functools', 'python3-jwt', 'python3-launchpadlib', 'python3-lazr.restfulclient', 'python3-lazr.uri', 'python3-merge3', 'python3-minimal', 'python3-more-itertools', 'python3-nacl', 'python3-oauthlib', 'python3-patiencediff', 'python3-pkg-resources', 'python3-pyparsing', 'python3-requests', 'python3-sshsig', 'python3-typeguard', 'python3-typing-extensions', 'python3-tzlocal', 'python3-urllib3', 'python3-wadllib', 'python3-wrapt', 'python3-yaml', 'python3.13', 'python3.13-minimal', 'readline-common', 'systemd', 'systemd-cryptsetup', 'systemd-timesyncd', 'xauth'] 0m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', 'brz'] 0m55.3s DUMP: dpkg: warning: ignoring request to remove brz which is not installed 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', 'brz'] 0m55.3s INFO: Running scripts post_purge 0m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_purge_exceptions'] 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_purge_exceptions'] 0m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', '--pending'] 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--purge', '--pending'] 0m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--remove', '--pending'] 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg', '--remove', '--pending'] 0m55.3s INFO: Running scripts post_test 0m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_test_exceptions'] 0m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'tmp/scripts/post_test_exceptions'] 0m55.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m55.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m55.8s INFO: IGNORED broken symlink: /etc/vconsole.conf (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m55.8s INFO: IGNORED broken symlink: /etc/default/locale (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.1s DEBUG: No broken symlinks as far as we can find. 0m56.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-divert', '--list'] 0m56.1s DUMP: local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m56.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'dpkg-divert', '--list'] 0m56.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'clean'] 0m56.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje', 'apt-get', 'clean'] 0m56.2s DEBUG: Recording chroot state 0m56.6s INFO: IGNORED PATH@1: /var/lib/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.6s INFO: IGNORED PATH@1: /var/lib/systemd/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.6s INFO: IGNORED PATH@1: /var/cache/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.6s INFO: IGNORED PATH@1: /var/log/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.6s INFO: IGNORED PATH@1: /var/spool/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.6s INFO: IGNORED PATH@1: /etc/issue (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.6s INFO: IGNORED PATH@1: /etc/nsswitch.conf (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.6s INFO: IGNORED PATH@1: /etc/pam.d/ (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.7s INFO: IGNORED PATH@1: /root/ (flag d- systemd-tmpfiles snippet /usr/lib/tmpfiles.d/provision.conf) 0m56.7s INFO: IGNORED PATH@1: /run/lock/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/legacy.conf) 0m56.7s INFO: IGNORED PATH@2: /var/lib/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.7s INFO: IGNORED PATH@2: /var/lib/private/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.7s INFO: IGNORED PATH@2: /var/lib/systemd/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.7s INFO: IGNORED PATH@2: /var/cache/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.7s INFO: IGNORED PATH@2: /var/cache/private/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.7s INFO: IGNORED PATH@2: /var/log/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.7s INFO: IGNORED PATH@2: /var/log/private/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.7s INFO: IGNORED PATH@2: /var/spool/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/var.conf) 0m56.7s INFO: IGNORED PATH@2: /etc/vconsole.conf (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.7s INFO: IGNORED PATH@2: /etc/issue (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.7s INFO: IGNORED PATH@2: /etc/nsswitch.conf (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.7s INFO: IGNORED PATH@2: /etc/default/locale (flag L+ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.7s INFO: IGNORED PATH@2: /etc/pam.d/ (flag C! systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.8s INFO: IGNORED PATH@2: /root/ (flag d- systemd-tmpfiles snippet /usr/lib/tmpfiles.d/provision.conf) 0m56.8s INFO: IGNORED PATH@2: /root/.ssh/ (flag d- systemd-tmpfiles snippet /usr/lib/tmpfiles.d/provision.conf) 0m56.8s INFO: IGNORED PATH@2: /run/log/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/user/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/shutdown/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/machines/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/users/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/sessions/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/seats/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/ask-password/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/netif/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd-network.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/netif/leases/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd-network.conf) 0m56.8s INFO: IGNORED PATH@2: /run/systemd/netif/links/ (flag d$ systemd-tmpfiles snippet /usr/lib/tmpfiles.d/systemd-network.conf) 0m56.8s INFO: IGNORED PATH@2: /run/sendsigs.omit.d/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/debian.conf) 0m56.8s INFO: IGNORED PATH@2: /run/sshd/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/20-systemd-ssh-generator.conf) 0m56.8s INFO: IGNORED PATH@2: /run/lock/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/legacy.conf) 0m56.8s INFO: IGNORED PATH@2: /run/lock/subsys/ (flag d systemd-tmpfiles snippet /usr/lib/tmpfiles.d/legacy.conf) 0m56.8s INFO: PASS: Installation and purging test. 0m57.3s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/shm'] 0m57.3s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/shm'] 0m57.3s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/console'] 0m57.3s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/console'] 0m57.3s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/ptmx'] 0m57.3s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/ptmx'] 0m57.3s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts'] 0m57.3s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/dev/pts'] 0m57.3s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/proc'] 0m57.4s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje/proc'] 0m57.4s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m57.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmf9y4eje'] 0m57.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpmf9y4eje 0m57.5s INFO: PASS: All tests. 0m57.5s INFO: piuparts run ends. ret=0 End: 2026-02-23 10:43:24 GMT