Start: 2017-01-16 17:01:07 UTC [lenny] Package: blootbot Priority: optional Section: net Installed-Size: 880 Maintainer: Neil McGovern Architecture: all Version: 1.2.0-6.3 Depends: perl, debconf (>= 1.2.9) | debconf-2.0, libnet-irc-perl, libdbd-mysql-perl, libdbi-perl, adduser, lsb-base Recommends: mysql-server, libwww-perl, libwww-search-perl, libhtml-parser-perl, libxml-parser-perl, liburi-perl, libnet-perl, libnet-telnet-perl Suggests: bzip2 Filename: pool/main/b/blootbot/blootbot_1.2.0-6.3_all.deb Size: 251322 MD5sum: b98fe781e145beaf1565d3968c62c4e1 SHA1: 7f72cc02bee618f737f20494ed826efd2840c528 SHA256: 7eef46c1701d0469526c35d2b51ad34caf127ff876e01a0056d90a37c9307f08 Description: a severely modified infobot for IRC This bot is based upon infobot-0.44.2 by Kevin Lenzo. The basis of infobot is still there but _many_ wild features have been added. Along the way, a couple of typos were spotted in the original infobot source and fixed in this version. Without infobot, there would be no blootbot so all thanks to Kevin for bringing infobot in the first place. An irc infobot is a bot that provides information to IRC users. . FEATURES * Additional information stored with factoids. (factinfo) * Wide range of statistics for Bot, Factoids, IRC, Debian. (status, factstats, ircstats, chanstats, cmdstats) * Advanced topic management. (the first cool feature) * Improved factoid search, allowing search by key or value. * Freshmeat support (freshmeat.net) * Debian Contents and Packages, search and info. * much more... Tag: implemented-in::perl, protocol::dcc, protocol::irc, use::chatting [squeeze] Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --no-check-valid-until --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt blootbot=None 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.74 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --no-check-valid-until --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt blootbot=None 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpPuh1Qc 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpPuh1Qc 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m4.3s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m4.3s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc'] 0m4.3s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc'] 0m4.3s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'gid=5,mode=620', 'devpts', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/pts'] 0m4.3s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'gid=5,mode=620', 'devpts', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/pts'] 0m4.3s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/shm'] 0m4.3s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/shm'] 0m4.3s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 0m4.4s DEBUG: Created policy-rc.d and chmodded it. 0m4.4s DEBUG: Created resolv.conf. 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'update'] 0m5.0s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 0m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'update'] 0m5.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpPuh1Qc/tmp/scripts/ 0m5.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpPuh1Qc/tmp/scripts/ 0m5.1s INFO: Running scripts post_chroot_unpack 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', '-yf', 'dist-upgrade'] 0m5.5s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', '-yf', 'dist-upgrade'] 0m5.5s INFO: Running scripts post_setup 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_dummy_users'] 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_dummy_users'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_experimental'] 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_experimental'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_forbid_home'] 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_forbid_home'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.4s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_minimize'] 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_minimize'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m8.5s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (720kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m8.5s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpPuh1Qc to squeeze 0m8.5s DEBUG: sources.list: deb http://archive.debian.org/debian squeeze main 0m8.5s INFO: Running scripts pre_distupgrade 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_exceptions'] 0m8.5s DUMP: removed `/etc/adduser.conf' 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_exceptions'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'update'] 0m10.5s DUMP: Get:1 http://archive.debian.org squeeze Release.gpg [1655B] Get:2 http://archive.debian.org squeeze Release [96.0kB] Get:3 http://archive.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (7271kB/s) Reading package lists... 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'update'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', '-yf', 'dist-upgrade'] 1m36.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://archive.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://archive.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://archive.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://archive.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://archive.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://archive.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://archive.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://archive.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://archive.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://archive.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://archive.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://archive.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://archive.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://archive.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://archive.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://archive.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://archive.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://archive.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://archive.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://archive.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://archive.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://archive.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://archive.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://archive.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://archive.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://archive.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://archive.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://archive.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://archive.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://archive.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://archive.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://archive.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://archive.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://archive.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://archive.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://archive.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://archive.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://archive.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://archive.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://archive.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://archive.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://archive.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://archive.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://archive.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://archive.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://archive.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://archive.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://archive.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://archive.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://archive.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://archive.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://archive.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://archive.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://archive.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://archive.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://archive.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://archive.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://archive.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://archive.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://archive.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://archive.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://archive.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://archive.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://archive.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://archive.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://archive.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://archive.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://archive.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://archive.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://archive.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://archive.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://archive.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://archive.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://archive.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://archive.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://archive.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://archive.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://archive.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://archive.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://archive.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://archive.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://archive.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 1s (31.0MB/s) (Reading database ... 6014 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6016 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.4-base. (Reading database ... 6017 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Setting up gcc-4.4-base (4.4.5-8) ... (Reading database ... 6025 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.5-8) ... Selecting previously deselected package liblzma2. (Reading database ... 6025 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Setting up liblzma2 (5.0.0-2) ... Selecting previously deselected package xz-utils. (Reading database ... 6035 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Setting up xz-utils (5.0.0-2) ... (Reading database ... 6077 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Selecting previously deselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6083 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Setting up sensible-utils (0.0.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6090 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.4) ... Selecting previously deselected package dash. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6086 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Setting up dash (0.5.5.1-7.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6121 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Setting up coreutils (8.5-1) ... Selecting previously deselected package diffutils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6147 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Setting up diffutils (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Setting up liblocale-gettext-perl (1.05-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Setting up libtext-iconv-perl (1.7-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Setting up libtext-charwidth-perl (0.04-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Setting up libtext-wrapi18n-perl (0.06-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Setting up debconf-i18n (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6235 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.96-1) ... Selecting previously deselected package libdb4.8. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Setting up libdb4.8 (4.8.30-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6247 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6250 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.2-23.2squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Jan 16 17:01:57 UTC 2017. Universal Time is now: Mon Jan 16 17:01:57 UTC 2017. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6253 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6254 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6257 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.14.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20170116T1702.log success: Enabled dependency based boot system. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6305 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6308 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Setting up findutils (4.4.2-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6310 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.6.3-3+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.04) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6318 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.41-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.23-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Setting up diff (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Setting up mktemp (8.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.22) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6314 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.5-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.4.dfsg-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Setting up readline-common (6.1-3) ... Selecting previously deselected package libreadline6. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Setting up libreadline6 (6.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Setting up libusb-0.1-4 (2:0.1.12-16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6279 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Setting up libattr1 (1:2.4.44-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Setting up libacl1 (2.2.49-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.5-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6348 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', '-yf', 'dist-upgrade'] 1m36.3s INFO: Running scripts post_distupgrade 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_exceptions'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_exceptions'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_experimental'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_experimental'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m36.3s DUMP: Enabling dpkg --force-unsafe-io. 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m36.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m36.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m36.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m36.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m36.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m36.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m36.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'clean'] 1m36.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'apt-get', 'clean'] 1m36.9s DEBUG: Recording chroot state 1m37.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 1m37.5s DUMP: install ok installed adduser 3.112+nmu2 install ok installed apt 0.8.10.3+squeeze1 install ok installed base-files 6.0squeeze10 install ok installed base-passwd 3.5.22 install ok installed bash 4.1-3 install ok installed bsdutils 1:2.17.2-9 install ok installed coreutils 8.5-1 install ok installed dash 0.5.5.1-7.4 install ok installed debconf 1.5.36.1 install ok installed debconf-i18n 1.5.36.1 install ok installed debian-archive-keyring 2010.08.28+squeeze1 install ok installed debianutils 3.4 install ok installed diff 1:3.0-1 install ok installed diffutils 1:3.0-1 install ok installed dmsetup 2:1.02.48-5 install ok installed dpkg 1.15.11 install ok installed e2fslibs 1.41.12-4stable1 install ok installed e2fsprogs 1.41.12-4stable1 install ok installed findutils 4.4.2-1+b1 install ok installed gcc-4.2-base 4.2.4-6 install ok installed gcc-4.3-base 4.3.5-4 install ok installed gcc-4.4-base 4.4.5-8 install ok installed gnupg 1.4.10-4+squeeze4 install ok installed gpgv 1.4.10-4+squeeze4 install ok installed grep 2.6.3-3+squeeze1 install ok installed gzip 1.3.12-9+squeeze1 install ok installed hostname 3.04 install ok installed initscripts 2.88dsf-13.1+squeeze1 install ok installed insserv 1.14.0-2 install ok installed libacl1 2.2.49-4 install ok installed libattr1 1:2.4.44-2 install ok installed libblkid1 2.17.2-9 install ok installed libbz2-1.0 1.0.5-6+squeeze1 install ok installed libc-bin 2.11.3-4 install ok installed libc6 2.11.3-4 install ok installed libcomerr2 1.41.12-4stable1 install ok installed libdb4.6 4.6.21-16 install ok installed libdb4.8 4.8.30-2 install ok installed libdevmapper1.02.1 2:1.02.48-5 install ok installed libgcc1 1:4.4.5-8 install ok installed liblocale-gettext-perl 1.05-6 install ok installed liblzma2 5.0.0-2 install ok installed libncurses5 5.7+20100313-5 install ok installed libncursesw5 5.7+20100313-5 install ok installed libpam-modules 1.1.1-6.1+squeeze1 install ok installed libpam-runtime 1.1.1-6.1+squeeze1 install ok installed libpam0g 1.1.1-6.1+squeeze1 install ok installed libreadline5 5.2-7 install ok installed libreadline6 6.1-3 install ok installed libselinux1 2.0.96-1 install ok installed libsepol1 2.0.41-1 install ok installed libslang2 2.2.2-4 install ok installed libss2 1.41.12-4stable1 install ok installed libstdc++6 4.4.5-8 install ok installed libtext-charwidth-perl 0.04-6 install ok installed libtext-iconv-perl 1.7-2 install ok installed libtext-wrapi18n-perl 0.06-7 install ok installed libudev0 164-3 install ok installed libusb-0.1-4 2:0.1.12-16 install ok installed libuuid1 2.17.2-9 install ok installed login 1:4.1.4.2+svn3283-2+squeeze1 install ok installed lsb-base 3.2-23.2squeeze1 install ok installed lzma 4.43-14 install ok installed makedev 2.3.1-89 install ok installed mawk 1.3.3-15 install ok installed mktemp 8.5-1 install ok installed mount 2.17.2-9 install ok installed ncurses-base 5.7+20100313-5 install ok installed ncurses-bin 5.7+20100313-5 install ok installed passwd 1:4.1.4.2+svn3283-2+squeeze1 install ok installed perl-base 5.10.1-17squeeze6 install ok installed procps 1:3.2.8-9squeeze1 install ok installed readline-common 6.1-3 install ok installed sed 4.2.1-7 install ok installed sensible-utils 0.0.4 install ok installed sysv-rc 2.88dsf-13.1+squeeze1 install ok installed sysvinit 2.88dsf-13.1+squeeze1 install ok installed sysvinit-utils 2.88dsf-13.1+squeeze1 install ok installed tar 1.23-3 install ok installed tzdata 2014e-0squeeze1 install ok installed ucf 3.0025+nmu1 install ok installed util-linux 2.17.2-9 install ok installed xz-utils 5.0.0-2 install ok installed zlib1g 1:1.2.3.4.dfsg-3 1m37.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 1m37.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'dpkg-divert', '--list'] 1m37.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 1m37.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc', 'dpkg-divert', '--list'] 1m37.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc/sys/fs/binfmt_misc'] 1m37.8s DUMP: umount: /srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc/sys/fs/binfmt_misc: not mounted 1m37.8s DEBUG: Command failed (status=32), but ignoring error: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc/sys/fs/binfmt_misc'] 1m37.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/shm'] 1m37.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/shm'] 1m37.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/pts'] 1m37.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/dev/pts'] 1m37.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc'] 1m37.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc/proc'] 1m37.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m37.9s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpPuh1Qc'] 1m37.9s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpPuh1Qc 1m37.9s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m37.9s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpEl0nb3 1m37.9s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpEl0nb3 1m37.9s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m39.3s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m39.3s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc'] 1m39.3s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc'] 1m39.3s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'gid=5,mode=620', 'devpts', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/pts'] 1m39.3s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'gid=5,mode=620', 'devpts', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/pts'] 1m39.3s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/shm'] 1m39.3s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/shm'] 1m39.3s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 1m39.3s DEBUG: Created policy-rc.d and chmodded it. 1m39.3s DEBUG: Created resolv.conf. 1m39.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', 'update'] 1m39.9s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 1m39.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', 'update'] 1m39.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpEl0nb3/tmp/scripts/ 1m39.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpEl0nb3/tmp/scripts/ 1m39.9s INFO: Running scripts post_chroot_unpack 1m39.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', '-yf', 'dist-upgrade'] 1m40.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', '-yf', 'dist-upgrade'] 1m40.2s INFO: Running scripts post_setup 1m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_dummy_users'] 1m41.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_dummy_users'] 1m41.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_experimental'] 1m41.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_experimental'] 1m41.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_forbid_home'] 1m41.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_forbid_home'] 1m41.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_force-unsafe-io'] 1m41.2s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 1m41.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_force-unsafe-io'] 1m41.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_minimize'] 1m41.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_minimize'] 1m41.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_squeeze-backports'] 1m41.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_squeeze-backports'] 1m41.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m43.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (2556kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m43.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m43.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpEl0nb3'] 1m43.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpEl0nb3'] 1m43.3s INFO: Running scripts is_testable 1m43.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/is_testable_uninstallable'] 1m43.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/is_testable_uninstallable'] 1m43.3s INFO: Running scripts pre_test 1m43.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_test_root_password'] 1m43.3s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m43.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_test_root_password'] 1m43.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'show', 'blootbot'] 1m43.4s DUMP: Package: blootbot Priority: optional Section: net Installed-Size: 880 Maintainer: Neil McGovern Architecture: all Version: 1.2.0-6.3 Depends: perl, debconf (>= 1.2.9) | debconf-2.0, libnet-irc-perl, libdbd-mysql-perl, libdbi-perl, adduser, lsb-base Recommends: mysql-server, libwww-perl, libwww-search-perl, libhtml-parser-perl, libxml-parser-perl, liburi-perl, libnet-perl, libnet-telnet-perl Suggests: bzip2 Filename: pool/main/b/blootbot/blootbot_1.2.0-6.3_all.deb Size: 251322 MD5sum: b98fe781e145beaf1565d3968c62c4e1 SHA1: 7f72cc02bee618f737f20494ed826efd2840c528 SHA256: 7eef46c1701d0469526c35d2b51ad34caf127ff876e01a0056d90a37c9307f08 Description: a severely modified infobot for IRC This bot is based upon infobot-0.44.2 by Kevin Lenzo. The basis of infobot is still there but _many_ wild features have been added. Along the way, a couple of typos were spotted in the original infobot source and fixed in this version. Without infobot, there would be no blootbot so all thanks to Kevin for bringing infobot in the first place. An irc infobot is a bot that provides information to IRC users. . FEATURES * Additional information stored with factoids. (factinfo) * Wide range of statistics for Bot, Factoids, IRC, Debian. (status, factstats, ircstats, chanstats, cmdstats) * Advanced topic management. (the first cool feature) * Improved factoid search, allowing search by key or value. * Freshmeat support (freshmeat.net) * Debian Contents and Packages, search and info. * much more... Tag: implemented-in::perl, protocol::dcc, protocol::irc, use::chatting 1m43.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'show', 'blootbot'] 1m43.4s INFO: apt-cache knows about the following packages: blootbot 1m43.4s INFO: Running scripts pre_install 1m43.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_database-server'] 1m50.5s DUMP: Installing mysql-server ... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libgdbm3 libmysqlclient15off libnet-daemon-perl libplrpc-perl libwrap0 mysql-client-5.0 mysql-common mysql-server-5.0 perl perl-modules psmisc Suggested packages: dbishell libcompress-zlib-perl tinyca perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl Recommended packages: tcpd libterm-readkey-perl mailx libhtml-template-perl netbase The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libgdbm3 libmysqlclient15off libnet-daemon-perl libplrpc-perl libwrap0 mysql-client-5.0 mysql-common mysql-server mysql-server-5.0 perl perl-modules psmisc 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 47.1MB of archives. After this operation, 149MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main mysql-common 5.0.51a-24+lenny5 [61.7kB] Get:2 http://archive.debian.org lenny/main perl-modules 5.10.0-19lenny5 [3196kB] Get:3 http://archive.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:4 http://archive.debian.org lenny/main perl 5.10.0-19lenny5 [5239kB] Get:5 http://archive.debian.org lenny/main libnet-daemon-perl 0.38-1.1 [45.8kB] Get:6 http://archive.debian.org lenny/main libplrpc-perl 0.2017-1.1 [34.9kB] Get:7 http://archive.debian.org lenny/main libdbi-perl 1.605-1 [788kB] Get:8 http://archive.debian.org lenny/main libmysqlclient15off 5.0.51a-24+lenny5 [1906kB] Get:9 http://archive.debian.org lenny/main libdbd-mysql-perl 4.007-1+lenny1 [142kB] Get:10 http://archive.debian.org lenny/main libwrap0 7.6.q-16 [31.9kB] Get:11 http://archive.debian.org lenny/main mysql-client-5.0 5.0.51a-24+lenny5 [8207kB] Get:12 http://archive.debian.org lenny/main psmisc 22.6-1 [89.6kB] Get:13 http://archive.debian.org lenny/main mysql-server-5.0 5.0.51a-24+lenny5 [27.3MB] Get:14 http://archive.debian.org lenny/main mysql-server 5.0.51a-24+lenny5 [56.1kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 47.1MB in 1s (31.0MB/s) SELECTING PREVIOUSLY DESELECTED PACKAGE MYSQL-COMMON. (READING DATABASE ... 6014 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING MYSQL-COMMON (FROM .../MYSQL-COMMON_5.0.51A-24+LENNY5_ALL.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE PERL-MODULES. UNPACKING PERL-MODULES (FROM .../PERL-MODULES_5.10.0-19LENNY5_ALL.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBGDBM3. UNPACKING LIBGDBM3 (FROM .../LIBGDBM3_1.8.3-3_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE PERL. UNPACKING PERL (FROM .../PERL_5.10.0-19LENNY5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBNET-DAEMON-PERL. UNPACKING LIBNET-DAEMON-PERL (FROM .../LIBNET-DAEMON-PERL_0.38-1.1_ALL.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBPLRPC-PERL. UNPACKING LIBPLRPC-PERL (FROM .../LIBPLRPC-PERL_0.2017-1.1_ALL.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDBI-PERL. UNPACKING LIBDBI-PERL (FROM .../LIBDBI-PERL_1.605-1_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBMYSQLCLIENT15OFF. UNPACKING LIBMYSQLCLIENT15OFF (FROM .../LIBMYSQLCLIENT15OFF_5.0.51A-24+LENNY5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDBD-MYSQL-PERL. UNPACKING LIBDBD-MYSQL-PERL (FROM .../LIBDBD-MYSQL-PERL_4.007-1+LENNY1_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBWRAP0. UNPACKING LIBWRAP0 (FROM .../LIBWRAP0_7.6.Q-16_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE MYSQL-CLIENT-5.0. UNPACKING MYSQL-CLIENT-5.0 (FROM .../MYSQL-CLIENT-5.0_5.0.51A-24+LENNY5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE PSMISC. UNPACKING PSMISC (FROM .../PSMISC_22.6-1_AMD64.DEB) ... SETTING UP MYSQL-COMMON (5.0.51A-24+LENNY5) ... SELECTING PREVIOUSLY DESELECTED PACKAGE MYSQL-SERVER-5.0. (READING DATABASE ... 7553 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING MYSQL-SERVER-5.0 (FROM .../MYSQL-SERVER-5.0_5.0.51A-24+LENNY5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE MYSQL-SERVER. UNPACKING MYSQL-SERVER (FROM .../MYSQL-SERVER_5.0.51A-24+LENNY5_ALL.DEB) ... SETTING UP LIBGDBM3 (1.8.3-3) ... SETTING UP LIBMYSQLCLIENT15OFF (5.0.51A-24+LENNY5) ... SETTING UP LIBWRAP0 (7.6.Q-16) ... SETTING UP PSMISC (22.6-1) ... SETTING UP PERL-MODULES (5.10.0-19LENNY5) ... SETTING UP PERL (5.10.0-19LENNY5) ... SETTING UP LIBNET-DAEMON-PERL (0.38-1.1) ... SETTING UP LIBPLRPC-PERL (0.2017-1.1) ... SETTING UP LIBDBI-PERL (1.605-1) ... SETTING UP LIBDBD-MYSQL-PERL (4.007-1+LENNY1) ... SETTING UP MYSQL-CLIENT-5.0 (5.0.51A-24+LENNY5) ... SETTING UP MYSQL-SERVER-5.0 (5.0.51A-24+LENNY5) ... STOPPING MYSQL DATABASE SERVER: MYSQLD. STARTING MYSQL DATABASE SERVER: MYSQLD. CHECKING FOR CORRUPT, NOT CLEANLY CLOSED AND UPGRADE NEEDING TABLES.. SETTING UP MYSQL-SERVER (5.0.51A-24+LENNY5) ... 1m50.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_database-server'] 1m50.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_exceptions'] 1m50.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_exceptions'] 1m50.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_extras'] 1m50.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_extras'] 1m50.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_foreign_architecture'] 1m50.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_foreign_architecture'] 1m50.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m50.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m50.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'policy'] 1m50.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m50.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'policy'] 1m50.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'policy', 'blootbot'] 1m50.8s DUMP: blootbot: Installed: (none) Candidate: 1.2.0-6.3 Version table: 1.2.0-6.3 0 500 http://archive.debian.org lenny/main Packages 1m50.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-cache', 'policy', 'blootbot'] 1m50.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', '-y', 'install', 'blootbot'] 1m52.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libnet-irc-perl Suggested packages: bzip2 Recommended packages: libwww-perl libwww-search-perl libhtml-parser-perl libxml-parser-perl liburi-perl libnet-telnet-perl The following NEW packages will be installed: blootbot libnet-irc-perl 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 324kB of archives. After this operation, 1163kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libnet-irc-perl 0.75-8 [72.6kB] Get:2 http://archive.debian.org lenny/main blootbot 1.2.0-6.3 [251kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 324kB in 0s (1745kB/s) Selecting previously deselected package libnet-irc-perl. (Reading database ... 9502 files and directories currently installed.) Unpacking libnet-irc-perl (from .../libnet-irc-perl_0.75-8_all.deb) ... Selecting previously deselected package blootbot. Unpacking blootbot (from .../blootbot_1.2.0-6.3_all.deb) ... Setting up libnet-irc-perl (0.75-8) ... Setting up blootbot (1.2.0-6.3) ... Creating sample /var/lib/blootbot/blootbot.users, you will need to edit this and set a password before the bot is ready for use See /usr/share/doc/blootbot/README.Debian for details The bot will by default join the Freenode network, edit /etc/blootbot/ircII.servers to change this Creating a default config file as /etc/blootbot/blootbot.config [ 1] Loaded config blootbot.config (47 items) [ 2] Loading DB modules... [ 3] MEM: (DBI // mysql) increased by 264 kB [ 4] using MySQL support. [ 5] Trying to see if we have already done this stuff... [ 6] !WARN! PERL: DBI connect('blootbot:localhost','blootbot',...) failed: Access denied for user 'blootbot'@'localhost' (using password: NO) at /usr/share/blootbot/src/db_mysql.pl line 22 [ 7] !ERROR! cannot connect to localhost. [ 8] !ERROR! since mysql is not available, shutting down bot! [ 9] !WARN! PERL: Use of uninitialized value $_[0] in join or string at /usr/share/blootbot/src/modules.pl line 379. [ 10] !ERROR! UNKNOWN FUNCTION CALLED: main::closeSHM () [ 11] Could not connect to database blootbot, continuing Please enter user information for root access to the mysql database. The username is probably 'root', the password you should have set yourself. If you haven't set one yet, leave it blank, and read /usr/share/doc/mysql-server/README.Debian Username: [ 12] !WARN! PERL: Use of uninitialized value $adminuser in chop at /usr/sbin/blootbotsetup line 56. Password: [ 13] !WARN! PERL: Use of uninitialized value $adminpass in chop at /usr/sbin/blootbotsetup line 61. [ 14] !WARN! PERL: Use of uninitialized value $adminuser in string eq at /usr/sbin/blootbotsetup line 65. [ 15] !ERROR! error: adminuser is blank. blootbotsetup failed, rc == 1 at /var/lib/dpkg/info/blootbot.postinst line 87, line 5. dpkg: error processing blootbot (--configure): subprocess post-installation script returned error exit status 25 Errors were encountered while processing: blootbot E: Sub-process /usr/bin/dpkg returned an error code (1) 1m52.3s ERROR: Command failed (status=100): ['chroot', '/srv/piuparts.debian.org/tmp/tmpEl0nb3', 'apt-get', '-y', 'install', 'blootbot'] Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libnet-irc-perl Suggested packages: bzip2 Recommended packages: libwww-perl libwww-search-perl libhtml-parser-perl libxml-parser-perl liburi-perl libnet-telnet-perl The following NEW packages will be installed: blootbot libnet-irc-perl 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 324kB of archives. After this operation, 1163kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libnet-irc-perl 0.75-8 [72.6kB] Get:2 http://archive.debian.org lenny/main blootbot 1.2.0-6.3 [251kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 324kB in 0s (1745kB/s) Selecting previously deselected package libnet-irc-perl. (Reading database ... 9502 files and directories currently installed.) Unpacking libnet-irc-perl (from .../libnet-irc-perl_0.75-8_all.deb) ... Selecting previously deselected package blootbot. Unpacking blootbot (from .../blootbot_1.2.0-6.3_all.deb) ... Setting up libnet-irc-perl (0.75-8) ... Setting up blootbot (1.2.0-6.3) ... Creating sample /var/lib/blootbot/blootbot.users, you will need to edit this and set a password before the bot is ready for use See /usr/share/doc/blootbot/README.Debian for details The bot will by default join the Freenode network, edit /etc/blootbot/ircII.servers to change this Creating a default config file as /etc/blootbot/blootbot.config [ 1] Loaded config blootbot.config (47 items) [ 2] Loading DB modules... [ 3] MEM: (DBI // mysql) increased by 264 kB [ 4] using MySQL support. [ 5] Trying to see if we have already done this stuff... [ 6] !WARN! PERL: DBI connect('blootbot:localhost','blootbot',...) failed: Access denied for user 'blootbot'@'localhost' (using password: NO) at /usr/share/blootbot/src/db_mysql.pl line 22 [ 7] !ERROR! cannot connect to localhost. [ 8] !ERROR! since mysql is not available, shutting down bot! [ 9] !WARN! PERL: Use of uninitialized value $_[0] in join or string at /usr/share/blootbot/src/modules.pl line 379. [ 10] !ERROR! UNKNOWN FUNCTION CALLED: main::closeSHM () [ 11] Could not connect to database blootbot, continuing Please enter user information for root access to the mysql database. The username is probably 'root', the password you should have set yourself. If you haven't set one yet, leave it blank, and read /usr/share/doc/mysql-server/README.Debian Username: [ 12] !WARN! PERL: Use of uninitialized value $adminuser in chop at /usr/sbin/blootbotsetup line 56. Password: [ 13] !WARN! PERL: Use of uninitialized value $adminpass in chop at /usr/sbin/blootbotsetup line 61. [ 14] !WARN! PERL: Use of uninitialized value $adminuser in string eq at /usr/sbin/blootbotsetup line 65. [ 15] !ERROR! error: adminuser is blank. blootbotsetup failed, rc == 1 at /var/lib/dpkg/info/blootbot.postinst line 87, line 5. dpkg: error processing blootbot (--configure): subprocess post-installation script returned error exit status 25 Errors were encountered while processing: blootbot E: Sub-process /usr/bin/dpkg returned an error code (1) 1m52.7s DEBUG: kill -15 25857 1m53.0s DEBUG: kill -15 25856 1m53.2s DEBUG: kill -15 25805 1m58.8s DEBUG: kill -15 26134 1m59.1s DEBUG: kill -15 26133 1m59.3s DEBUG: kill -9 25805 2m4.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc/sys/fs/binfmt_misc'] 2m4.9s DUMP: umount: /srv/piuparts.debian.org/tmp/tmpEl0nb3/proc/sys/fs/binfmt_misc: not mounted 2m4.9s DEBUG: Command failed (status=32), but ignoring error: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc/sys/fs/binfmt_misc'] 2m4.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/shm'] 2m4.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/shm'] 2m4.9s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/pts'] 2m5.0s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/dev/pts'] 2m5.0s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc'] 2m5.0s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpEl0nb3/proc'] 2m5.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpEl0nb3'] 2m5.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpEl0nb3'] 2m5.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpEl0nb3 2m5.1s ERROR: piuparts run ends. ret=1 End: 2017-01-16 17:03:12 UTC