Start: 2011-01-09 09:02:52 UTC Package: afbackup-client Priority: optional Section: utils Installed-Size: 1248 Maintainer: Debian QA Group Architecture: amd64 Source: afbackup Version: 3.5.3-3 Replaces: afbackup-client-i Depends: afbackup-common, tcsh | c-shell, debianutils (>= 1.6), libc6 (>= 2.7), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.1.4) Suggests: afbackup, sharutils Filename: pool/main/a/afbackup/afbackup-client_3.5.3-3_amd64.deb Size: 571886 MD5sum: 2d686b0f6b135bc2b0b5366d43781abe SHA1: a415ee4f9d6e2b2cdc6e289c1c52427705faae5f SHA256: cac93d7b4f20bd9ed9c8fc918e8578a60c54c30a08a0cd44e42585b73affaa3b Description: Client-Server Backup System (Client side) This is a client-server backup system offering several workstations a centralized backup to a special backup server. Backing up only one computer is easily possible, too. Any streaming device can be used for writing the data to it, usually this will be a tape device. Writing backups is normally done sequentially: The next writing to tape goes to the end of the previous write no matter where you have restored from in the meantime. THIS IS ONLY THE CLIENT, YOU NEED TO HAVE A SERVER RUNNING ON EITHER THIS OR ANOTHER HOST. . Features: - Authentication of the client is performed before it can take over control - Access restriction for the streamer device -> security - Client-side per-file compression -> reliability - Data stream is written to tape in pieces -> fast finding of files - Tape position logging for each file - Tape capacity is fully used - Full / incremental backups - Raw partitions can be backed up - Client and Server buffering for maximal throughput is done . Note: Tk is required if you want to use the graphical configuration tool instead of the text configuration tool. Homepage: http://sourceforge.net/projects/afbackup/ Tag: admin::backup, hardware::storage, interface::commandline, interface::x11, network::client, network::service, role::program, uitoolkit::tk, use::storing, works-with::file, x11::application Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ afbackup-client Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.40~201101041815 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ afbackup-client 0m0.0s INFO: Running on: Linux piatti 2.6.32.27-dsa-amd64 #1 SMP Mon Dec 13 10:07:36 UTC 2010 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpmUUhqA 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpmUUhqA 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpmUUhqA', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpmUUhqA', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Created policy-rc.d and chmodded it. 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'update'] 0m1.6s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'update'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', '-yf', 'upgrade'] 0m2.0s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', '-yf', 'upgrade'] 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'clean'] 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'clean'] 0m2.0s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpmUUhqA/tmp/scripts/ 0m2.0s INFO: Running scripts post_setup 0m2.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpmUUhqA to squeeze 0m2.0s INFO: Running scripts pre_distupgrade 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'update'] 0m4.1s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8610kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.5kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8890kB in 0s (10.1MB/s) Reading package lists... 0m4.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'update'] 0m4.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', '-yf', 'dist-upgrade'] 0m23.9s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.4MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-4 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-16 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-4 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13 [121kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13 [70.0kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13 [73.8kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13 [119kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-4 [187kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-4 [389kB] Get:74 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:75 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.4MB in 0s (47.6MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5894 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5896 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5897 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5905 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5905 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5915 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5957 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5963 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5970 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5966 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6001 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6027 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-16_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6115 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6119 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6123 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6129 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6127 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6130 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Jan 9 09:03:07 UTC 2011. Universal Time is now: Sun Jan 9 09:03:07 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6135 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6139 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6143 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110109T0903.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6191 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6196 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6204 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6200 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6150 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6233 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-4_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-4) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m23.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', '-yf', 'dist-upgrade'] 0m23.9s INFO: Running scripts post_distupgrade 0m23.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmUUhqA'] 0m24.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmUUhqA'] 0m24.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'clean'] 0m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'apt-get', 'clean'] 0m24.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'dpkg', '--get-selections', '*'] 0m24.9s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m24.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'dpkg', '--get-selections', '*'] 0m24.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'umount', '/proc'] 0m24.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmUUhqA', 'umount', '/proc'] 0m25.3s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpmUUhqA 0m25.3s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpNvuZYj 0m25.3s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpNvuZYj 0m25.3s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpNvuZYj', '-zxf', 'lenny.tar.gz'] 0m27.0s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpNvuZYj', '-zxf', 'lenny.tar.gz'] 0m27.0s DEBUG: Created policy-rc.d and chmodded it. 0m27.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m27.1s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m27.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m27.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-yf', 'upgrade'] 0m27.4s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m27.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-yf', 'upgrade'] 0m27.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'clean'] 0m27.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'clean'] 0m27.4s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpNvuZYj/tmp/scripts/ 0m27.4s INFO: Running scripts post_setup 0m27.4s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m27.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m27.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m27.7s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m27.7s INFO: Running scripts pre_install 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_install_exceptions'] 0m27.7s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_install_exceptions'] 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-y', 'install', 'afbackup-client'] 0m28.8s DUMP: Reading package lists... Building dependency tree... The following extra packages will be installed: afbackup-common libssl0.9.8 tcsh Suggested packages: afbackup sharutils wish The following NEW packages will be installed: afbackup-client afbackup-common libssl0.9.8 tcsh 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 2232kB of archives. After this operation, 5370kB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny9 [976kB] Get:2 http://piatti.debian.org lenny/main afbackup-common 3.5.2.1-1 [311kB] Get:3 http://piatti.debian.org lenny/main tcsh 6.14.00-7 [366kB] Get:4 http://piatti.debian.org lenny/main afbackup-client 3.5.2.1-1 [579kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2232kB in 0s (38.6MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libssl0.9.8. (Reading database ... 5894 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny9_amd64.deb) ... Selecting previously deselected package afbackup-common. Unpacking afbackup-common (from .../afbackup-common_3.5.2.1-1_all.deb) ... Selecting previously deselected package tcsh. Unpacking tcsh (from .../tcsh_6.14.00-7_amd64.deb) ... Selecting previously deselected package afbackup-client. Unpacking afbackup-client (from .../afbackup-client_3.5.2.1-1_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libssl0.9.8 (0.9.8g-15+lenny9) ... Setting up afbackup-common (3.5.2.1-1) ... Setting up tcsh (6.14.00-7) ... Setting up afbackup-client (3.5.2.1-1) ... 0m28.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-y', 'install', 'afbackup-client'] 0m28.8s INFO: Running scripts pre_upgrade 0m28.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_upgrade_exceptions'] 0m28.8s DUMP: Debug: running script tmp/scripts/pre_upgrade_exceptions 0m28.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_upgrade_exceptions'] 0m28.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m29.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m29.1s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpNvuZYj to squeeze 0m29.1s INFO: Running scripts pre_distupgrade 0m29.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m31.1s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8610kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.5kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8890kB in 0s (9996kB/s) Reading package lists... 0m31.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'update'] 0m31.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-yf', 'dist-upgrade'] 0m52.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: afbackup-client afbackup-common apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tcsh tzdata util-linux zlib1g 71 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 36.7MB of archives. After this operation, 13.2MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-4 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-16 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-4 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13 [121kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13 [70.0kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13 [73.8kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13 [119kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-4 [187kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-4 [389kB] Get:74 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4 [997kB] Get:75 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:76 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:77 http://piatti.debian.org squeeze/main afbackup-common 3.5.3-3 [319kB] Get:78 http://piatti.debian.org squeeze/main tcsh 6.17.02-4 [391kB] Get:79 http://piatti.debian.org squeeze/main afbackup-client 3.5.3-3 [572kB] Get:80 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:81 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:82 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:83 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:84 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 36.7MB in 0s (40.0MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6030 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6032 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6033 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6041 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6041 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6051 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6093 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6099 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6106 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6102 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6114 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6114 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6137 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6163 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-16_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6233 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6233 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6255 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6255 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6255 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6259 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6265 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6263 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6266 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6268 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6268 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Jan 9 09:03:34 UTC 2011. Universal Time is now: Sun Jan 9 09:03:34 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6271 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6275 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6276 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6279 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6308 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110109T0903.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6309 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6327 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6330 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6332 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6334 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6334 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6337 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6337 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6338 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6338 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6335 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6335 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6335 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6336 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6286 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6299 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6299 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6299 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6300 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6308 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6308 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6352 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6352 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6352 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6353 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6353 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6370 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6370 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6369 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-4_amd64.deb) ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny9 (using .../libssl0.9.8_0.9.8o-4_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace afbackup-common 3.5.2.1-1 (using .../afbackup-common_3.5.3-3_all.deb) ... Unpacking replacement afbackup-common ... Preparing to replace tcsh 6.14.00-7 (using .../tcsh_6.17.02-4_amd64.deb) ... Unpacking replacement tcsh ... Preparing to replace afbackup-client 3.5.2.1-1 (using .../afbackup-client_3.5.3-3_amd64.deb) ... Unpacking replacement afbackup-client ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-4) ... Setting up libssl0.9.8 (0.9.8o-4) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up afbackup-common (3.5.3-3) ... Setting up tcsh (6.17.02-4) ... Installing new version of config file /etc/complete.tcsh ... Installing new version of config file /etc/csh.login ... Installing new version of config file /etc/csh.cshrc ... update-alternatives: using /bin/tcsh to provide /bin/csh (csh) in auto mode. Setting up afbackup-client (3.5.3-3) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m52.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-yf', 'dist-upgrade'] 0m52.1s INFO: Running scripts pre_install 0m52.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_install_exceptions'] 0m52.1s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m52.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_install_exceptions'] 0m52.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-y', 'install', 'afbackup-client'] 0m53.6s DUMP: Reading package lists... Building dependency tree... Reading state information... afbackup-client is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m53.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', '-y', 'install', 'afbackup-client'] 0m53.6s INFO: Running scripts post_distupgrade 0m53.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m53.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m53.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m54.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'clean'] 0m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'apt-get', 'clean'] 0m54.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m54.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--get-selections', '*'] 0m54.4s DUMP: afbackup-client install afbackup-common install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tcsh install tzdata install util-linux install xz-utils install zlib1g install 0m54.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--get-selections', '*'] 0m54.4s INFO: Running scripts pre_remove 0m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_remove_exceptions'] 0m54.4s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 0m54.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/pre_remove_exceptions'] 0m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'afbackup-common'] 0m54.4s DUMP: dpkg: dependency problems prevent removal of afbackup-common: afbackup-client depends on afbackup-common. dpkg: error processing afbackup-common (--remove): dependency problems - not removing Errors were encountered while processing: afbackup-common 0m54.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'afbackup-common'] 0m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'libssl0.9.8'] 0m54.4s DUMP: dpkg: dependency problems prevent removal of libssl0.9.8: afbackup-client depends on libssl0.9.8 (>= 0.9.8f-5). dpkg: error processing libssl0.9.8 (--remove): dependency problems - not removing Errors were encountered while processing: libssl0.9.8 0m54.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'libssl0.9.8'] 0m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'tcsh'] 0m54.5s DUMP: dpkg: dependency problems prevent removal of tcsh: afbackup-client depends on tcsh | c-shell; however: Package tcsh is to be removed. Package c-shell is not installed. Package tcsh which provides c-shell is to be removed. afbackup-client depends on tcsh | c-shell; however: Package tcsh is to be removed. Package c-shell is not installed. Package tcsh which provides c-shell is to be removed. dpkg: error processing tcsh (--remove): dependency problems - not removing Errors were encountered while processing: tcsh 0m54.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'tcsh'] 0m54.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'afbackup-client'] 0m54.5s DUMP: (Reading database ... 6407 files and directories currently installed.) Removing afbackup-client ... 0m54.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', 'afbackup-client'] 0m54.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.6s DUMP: (Reading database ... 6350 files and directories currently installed.) Removing libssl0.9.8 ... Removing tcsh ... Removing afbackup-common ... 0m54.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.6s INFO: Running scripts post_remove 0m54.6s INFO: Package afbackup-client contains cron file: /etc/cron.monthly/afbackup-client 0m54.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', '/etc/cron.monthly/afbackup-client'] 0m54.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', '/etc/cron.monthly/afbackup-client'] 0m54.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'afbackup-common'] 0m54.6s DUMP: dpkg: warning: ignoring request to remove afbackup-common which isn't installed. 0m54.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'afbackup-common'] 0m54.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'libssl0.9.8'] 0m54.8s DUMP: (Reading database ... 6279 files and directories currently installed.) Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... 0m54.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'libssl0.9.8'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'tcsh'] 0m54.8s DUMP: (Reading database ... 6279 files and directories currently installed.) Removing tcsh ... Purging configuration files for tcsh ... 0m54.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'tcsh'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'afbackup-client'] 0m54.9s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing afbackup-client ... Purging configuration files for afbackup-client ... 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', 'afbackup-client'] 0m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.9s INFO: Running scripts post_purge 0m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/post_purge_exceptions'] 0m54.9s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'tmp/scripts/post_purge_exceptions'] 0m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', '--pending'] 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--purge', '--pending'] 0m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'dpkg', '--remove', '--pending'] 0m56.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m56.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpNvuZYj'] 0m56.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'umount', '/proc'] 0m56.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpNvuZYj', 'umount', '/proc'] 0m56.7s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpNvuZYj 0m56.7s INFO: PASS: Upgrading between Debian distributions. 0m56.7s INFO: PASS: All tests. 0m56.7s INFO: piuparts run ends. End: 2011-01-09 09:03:49 UTC