Start: 2013-04-05 18:31:04 UTC [lenny] Package: barnowl-irc Priority: extra Section: net Installed-Size: 92 Maintainer: Sam Hartman Architecture: all Source: barnowl Version: 1.0.1-4+lenny2 Depends: libnet-irc-perl, libclass-accessor-perl, barnowl Filename: pool/main/b/barnowl/barnowl-irc_1.0.1-4+lenny2_all.deb Size: 39502 MD5sum: 7dd6dd51b6f8fbb189e174390973d0e0 SHA1: 18905a643db145c92ac4fbd79d2514c201e0fbd6 SHA256: 70e0b5378173fbcc3c945d6f38e3efe0faf0ba6644d79d07751a5a470ca5820b Description: Provide IRC support for the BarnOwl Zephyr client Install the Perl-based IRC module which will add IRC support to BarnOwl the next time it is reloaded. . BarnOwl is a curses-based instant-messaging client supporting the Zephyr, Jabber, IRC and AIM protocols. Much of the functionality is written in Perl, which is supported as an etension language. . BarnOwl is a fork of ktools software's owl Zephyr/AIM client. [squeeze] Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt barnowl-irc=None Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201303251306~0.50-22-g27c4826 starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'barnowl-irc=None' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpdxjNTY 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpdxjNTY 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpdxjNTY', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m2.2s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpdxjNTY', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m2.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'mount', '-t', 'proc', 'proc', '/proc'] 0m2.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'mount', '-t', 'proc', 'proc', '/proc'] 0m2.2s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m2.2s DEBUG: Created policy-rc.d and chmodded it. 0m2.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'update'] 0m4.0s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m4.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'update'] 0m4.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', '-yf', 'dist-upgrade'] 0m4.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m4.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', '-yf', 'dist-upgrade'] 0m4.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpdxjNTY/tmp/scripts/ 0m4.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpdxjNTY/tmp/scripts/ 0m4.3s INFO: Running scripts post_setup 0m4.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_experimental'] 0m4.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_experimental'] 0m4.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m9.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (523kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m9.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m9.3s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpdxjNTY to squeeze 0m9.3s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m9.3s INFO: Running scripts pre_distupgrade 0m9.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/pre_distupgrade_exceptions'] 0m9.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/pre_distupgrade_exceptions'] 0m9.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m9.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m9.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'update'] 0m14.4s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 3s (2368kB/s) Reading package lists... 0m14.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'update'] 0m14.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', '-yf', 'dist-upgrade'] 0m41.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 4s (7925kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Apr 5 18:31:35 UTC 2013. Universal Time is now: Fri Apr 5 18:31:35 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130405T1831.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m41.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', '-yf', 'dist-upgrade'] 0m41.9s INFO: Running scripts post_distupgrade 0m41.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_exceptions'] 0m41.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_exceptions'] 0m41.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_experimental'] 0m41.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_experimental'] 0m41.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m42.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m42.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m42.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m42.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m42.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m42.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m42.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m42.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'clean'] 0m42.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'apt-get', 'clean'] 0m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'dpkg', '--get-selections', '*'] 0m43.1s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'dpkg', '--get-selections', '*'] 0m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'dpkg-divert', '--list'] 0m43.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'dpkg-divert', '--list'] 0m43.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'umount', '/proc'] 0m43.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpdxjNTY', 'umount', '/proc'] 0m43.4s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m43.6s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpdxjNTY'] 0m43.6s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpdxjNTY 0m43.6s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m43.6s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpZZgR6i 0m43.6s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpZZgR6i 0m43.6s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpZZgR6i', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m45.4s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpZZgR6i', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'mount', '-t', 'proc', 'proc', '/proc'] 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'mount', '-t', 'proc', 'proc', '/proc'] 0m45.4s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m45.4s DEBUG: Created policy-rc.d and chmodded it. 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'update'] 0m45.8s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m45.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'update'] 0m45.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-yf', 'dist-upgrade'] 0m46.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m46.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-yf', 'dist-upgrade'] 0m46.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpZZgR6i/tmp/scripts/ 0m46.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpZZgR6i/tmp/scripts/ 0m46.1s INFO: Running scripts post_setup 0m46.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_experimental'] 0m46.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_experimental'] 0m46.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_forbid_home'] 0m46.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_forbid_home'] 0m46.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m51.9s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (507kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m51.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m51.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 0m52.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 0m52.2s INFO: Running scripts pre_test 0m52.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_test_root_password'] 0m52.2s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m52.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_test_root_password'] 0m52.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'show', 'barnowl-irc'] 0m52.3s DUMP: Package: barnowl-irc Priority: extra Section: net Installed-Size: 92 Maintainer: Sam Hartman Architecture: all Source: barnowl Version: 1.0.1-4+lenny2 Depends: libnet-irc-perl, libclass-accessor-perl, barnowl Filename: pool/main/b/barnowl/barnowl-irc_1.0.1-4+lenny2_all.deb Size: 39502 MD5sum: 7dd6dd51b6f8fbb189e174390973d0e0 SHA1: 18905a643db145c92ac4fbd79d2514c201e0fbd6 SHA256: 70e0b5378173fbcc3c945d6f38e3efe0faf0ba6644d79d07751a5a470ca5820b Description: Provide IRC support for the BarnOwl Zephyr client Install the Perl-based IRC module which will add IRC support to BarnOwl the next time it is reloaded. . BarnOwl is a curses-based instant-messaging client supporting the Zephyr, Jabber, IRC and AIM protocols. Much of the functionality is written in Perl, which is supported as an etension language. . BarnOwl is a fork of ktools software's owl Zephyr/AIM client. 0m52.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'show', 'barnowl-irc'] 0m52.3s INFO: apt-cache knows about the following packages: barnowl-irc 0m52.3s INFO: Running scripts pre_install 0m52.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_install_exceptions'] 0m52.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_install_exceptions'] 0m52.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m52.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m52.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'policy'] 0m52.6s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 0m52.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'policy'] 0m52.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'policy', 'barnowl-irc'] 0m52.6s DUMP: barnowl-irc: Installed: (none) Candidate: 1.0.1-4+lenny2 Version table: 1.0.1-4+lenny2 0 500 http://archive.debian.org lenny/main Packages 0m52.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'policy', 'barnowl-irc'] 0m52.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-y', 'install', 'barnowl-irc'] 0m58.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: barnowl libarchive-zip-perl libauthen-sasl-perl libclass-accessor-perl libcompress-raw-zlib-perl libcompress-zlib-perl libdigest-hmac-perl libdigest-sha1-perl libgdbm3 libgetopt-argvfile-perl libglib2.0-0 libgssapi-perl libhesiod0 libio-compress-base-perl libio-compress-zlib-perl libio-socket-ssl-perl libkeyutils1 libkrb53 libmodule-scandeps-perl libncursesw5 libnet-dns-perl libnet-ip-perl libnet-irc-perl libnet-ssleay-perl libpar-dist-perl libpar-perl libpcre3 libperl5.10 libssl0.9.8 libzephyr3 netbase perl perl-modules Suggested packages: zephyr-clients krb5-doc krb5-user libmime-base64-perl perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl Recommended packages: libglib2.0-data libnet-libidn-perl libgpm2 libmodule-signature-perl libpar-packer-perl ifupdown The following NEW packages will be installed: barnowl barnowl-irc libarchive-zip-perl libauthen-sasl-perl libclass-accessor-perl libcompress-raw-zlib-perl libcompress-zlib-perl libdigest-hmac-perl libdigest-sha1-perl libgdbm3 libgetopt-argvfile-perl libglib2.0-0 libgssapi-perl libhesiod0 libio-compress-base-perl libio-compress-zlib-perl libio-socket-ssl-perl libkeyutils1 libkrb53 libmodule-scandeps-perl libncursesw5 libnet-dns-perl libnet-ip-perl libnet-irc-perl libnet-ssleay-perl libpar-dist-perl libpar-perl libpcre3 libperl5.10 libssl0.9.8 libzephyr3 netbase perl perl-modules 0 upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 13.4MB of archives. After this operation, 47.9MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:2 http://archive.debian.org lenny/main libncursesw5 5.7+20081213-1 [375kB] Get:3 http://archive.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny16 [981kB] Get:4 http://archive.debian.org lenny/main netbase 4.34 [18.5kB] Get:5 http://archive.debian.org lenny/main libkeyutils1 1.2-9 [5984B] Get:6 http://archive.debian.org lenny/main libkrb53 1.6.dfsg.4~beta1-5lenny7 [521kB] Get:7 http://archive.debian.org lenny/main libpcre3 7.6-2.1 [213kB] Get:8 http://archive.debian.org lenny/main perl-modules 5.10.0-19lenny5 [3196kB] Get:9 http://archive.debian.org lenny/main perl 5.10.0-19lenny5 [5239kB] Get:10 http://archive.debian.org lenny/main libglib2.0-0 2.16.6-3 [828kB] Get:11 http://archive.debian.org lenny/main libperl5.10 5.10.0-19lenny5 [1010B] Get:12 http://archive.debian.org lenny/main libhesiod0 3.0.2-18.3 [22.5kB] Get:13 http://archive.debian.org lenny/main libzephyr3 2.1.20070719.SNAPSHOT-1.2 [27.9kB] Get:14 http://archive.debian.org lenny/main libdigest-sha1-perl 2.11-2+b1 [25.6kB] Get:15 http://archive.debian.org lenny/main libdigest-hmac-perl 1.01-7 [10.5kB] Get:16 http://archive.debian.org lenny/main libnet-ip-perl 1.25-2 [30.2kB] Get:17 http://archive.debian.org lenny/main libnet-dns-perl 0.63-2 [267kB] Get:18 http://archive.debian.org lenny/main libauthen-sasl-perl 2.12-1 [47.8kB] Get:19 http://archive.debian.org lenny/main libgssapi-perl 0.26-1 [71.1kB] Get:20 http://archive.debian.org lenny/main libnet-ssleay-perl 1.35-1 [211kB] Get:21 http://archive.debian.org lenny/main libio-socket-ssl-perl 1.16-1+lenny1 [54.2kB] Get:22 http://archive.debian.org lenny/main libmodule-scandeps-perl 0.84-1 [36.9kB] Get:23 http://archive.debian.org lenny/main libcompress-raw-zlib-perl 2.012-1lenny1 [57.3kB] Get:24 http://archive.debian.org lenny/main libio-compress-base-perl 2.012-1 [59.4kB] Get:25 http://archive.debian.org lenny/main libio-compress-zlib-perl 2.012-1 [148kB] Get:26 http://archive.debian.org lenny/main libcompress-zlib-perl 2.012-1 [36.7kB] Get:27 http://archive.debian.org lenny/main libarchive-zip-perl 1.18-1 [90.4kB] Get:28 http://archive.debian.org lenny/main libpar-dist-perl 0.31-1 [23.3kB] Get:29 http://archive.debian.org lenny/main libgetopt-argvfile-perl 1.11-1 [31.5kB] Get:30 http://archive.debian.org lenny/main libpar-perl 0.980-1lenny1 [88.9kB] Get:31 http://archive.debian.org lenny/main barnowl 1.0.1-4+lenny2 [498kB] Get:32 http://archive.debian.org lenny/main libclass-accessor-perl 0.31-2 [25.0kB] Get:33 http://archive.debian.org lenny/main libnet-irc-perl 0.75-8 [72.6kB] Get:34 http://archive.debian.org lenny/main barnowl-irc 1.0.1-4+lenny2 [39.5kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 13.4MB in 1s (6899kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libgdbm3. (Reading database ... 6013 files and directories currently installed.) Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20081213-1_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny16_amd64.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../archives/netbase_4.34_all.deb) ... Selecting previously deselected package libkeyutils1. Unpacking libkeyutils1 (from .../libkeyutils1_1.2-9_amd64.deb) ... Selecting previously deselected package libkrb53. Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.4~beta1-5lenny7_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.6-2.1_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny5_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-19lenny5_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.16.6-3_amd64.deb) ... Selecting previously deselected package libperl5.10. Unpacking libperl5.10 (from .../libperl5.10_5.10.0-19lenny5_amd64.deb) ... Selecting previously deselected package libhesiod0. Unpacking libhesiod0 (from .../libhesiod0_3.0.2-18.3_amd64.deb) ... Selecting previously deselected package libzephyr3. Unpacking libzephyr3 (from .../libzephyr3_2.1.20070719.SNAPSHOT-1.2_amd64.deb) ... Selecting previously deselected package libdigest-sha1-perl. Unpacking libdigest-sha1-perl (from .../libdigest-sha1-perl_2.11-2+b1_amd64.deb) ... Selecting previously deselected package libdigest-hmac-perl. Unpacking libdigest-hmac-perl (from .../libdigest-hmac-perl_1.01-7_all.deb) ... Selecting previously deselected package libnet-ip-perl. Unpacking libnet-ip-perl (from .../libnet-ip-perl_1.25-2_all.deb) ... Selecting previously deselected package libnet-dns-perl. Unpacking libnet-dns-perl (from .../libnet-dns-perl_0.63-2_amd64.deb) ... Selecting previously deselected package libauthen-sasl-perl. Unpacking libauthen-sasl-perl (from .../libauthen-sasl-perl_2.12-1_all.deb) ... Selecting previously deselected package libgssapi-perl. Unpacking libgssapi-perl (from .../libgssapi-perl_0.26-1_amd64.deb) ... Selecting previously deselected package libnet-ssleay-perl. Unpacking libnet-ssleay-perl (from .../libnet-ssleay-perl_1.35-1_amd64.deb) ... Selecting previously deselected package libio-socket-ssl-perl. Unpacking libio-socket-ssl-perl (from .../libio-socket-ssl-perl_1.16-1+lenny1_all.deb) ... Selecting previously deselected package libmodule-scandeps-perl. Unpacking libmodule-scandeps-perl (from .../libmodule-scandeps-perl_0.84-1_all.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.012-1lenny1_amd64.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.012-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.012-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.012-1_all.deb) ... Selecting previously deselected package libarchive-zip-perl. Unpacking libarchive-zip-perl (from .../libarchive-zip-perl_1.18-1_all.deb) ... Selecting previously deselected package libpar-dist-perl. Unpacking libpar-dist-perl (from .../libpar-dist-perl_0.31-1_all.deb) ... Selecting previously deselected package libgetopt-argvfile-perl. Unpacking libgetopt-argvfile-perl (from .../libgetopt-argvfile-perl_1.11-1_all.deb) ... Selecting previously deselected package libpar-perl. Unpacking libpar-perl (from .../libpar-perl_0.980-1lenny1_all.deb) ... Selecting previously deselected package barnowl. Unpacking barnowl (from .../barnowl_1.0.1-4+lenny2_amd64.deb) ... Selecting previously deselected package libclass-accessor-perl. Unpacking libclass-accessor-perl (from .../libclass-accessor-perl_0.31-2_all.deb) ... Selecting previously deselected package libnet-irc-perl. Unpacking libnet-irc-perl (from .../libnet-irc-perl_0.75-8_all.deb) ... Selecting previously deselected package barnowl-irc. Unpacking barnowl-irc (from .../barnowl-irc_1.0.1-4+lenny2_all.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgdbm3 (1.8.3-3) ... Setting up libncursesw5 (5.7+20081213-1) ... Setting up libssl0.9.8 (0.9.8g-15+lenny16) ... Setting up netbase (4.34) ... Setting up libkeyutils1 (1.2-9) ... Setting up libkrb53 (1.6.dfsg.4~beta1-5lenny7) ... Setting up libpcre3 (7.6-2.1) ... Setting up libglib2.0-0 (2.16.6-3) ... Setting up libperl5.10 (5.10.0-19lenny5) ... Setting up libhesiod0 (3.0.2-18.3) ... Setting up libzephyr3 (2.1.20070719.SNAPSHOT-1.2) ... Setting up perl-modules (5.10.0-19lenny5) ... Setting up perl (5.10.0-19lenny5) ... Setting up libdigest-sha1-perl (2.11-2+b1) ... Setting up libdigest-hmac-perl (1.01-7) ... Setting up libnet-ip-perl (1.25-2) ... Setting up libnet-dns-perl (0.63-2) ... Setting up libauthen-sasl-perl (2.12-1) ... Setting up libgssapi-perl (0.26-1) ... Setting up libnet-ssleay-perl (1.35-1) ... Setting up libio-socket-ssl-perl (1.16-1+lenny1) ... Setting up libmodule-scandeps-perl (0.84-1) ... Setting up libcompress-raw-zlib-perl (2.012-1lenny1) ... Setting up libio-compress-base-perl (2.012-1) ... Setting up libio-compress-zlib-perl (2.012-1) ... Setting up libcompress-zlib-perl (2.012-1) ... Setting up libarchive-zip-perl (1.18-1) ... Setting up libpar-dist-perl (0.31-1) ... Setting up libgetopt-argvfile-perl (1.11-1) ... Setting up libpar-perl (0.980-1lenny1) ... Setting up barnowl (1.0.1-4+lenny2) ... Setting up libclass-accessor-perl (0.31-2) ... Setting up libnet-irc-perl (0.75-8) ... Setting up barnowl-irc (1.0.1-4+lenny2) ... 0m58.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-y', 'install', 'barnowl-irc'] 0m58.2s INFO: Running scripts post_install 0m58.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 0m58.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 0m58.6s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpZZgR6i to squeeze 0m58.6s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m58.6s INFO: Running scripts pre_distupgrade 0m58.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_distupgrade_exceptions'] 0m58.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_distupgrade_exceptions'] 0m58.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m58.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m58.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'update'] 1m1.1s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.1MB/s) Reading package lists... 1m1.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'update'] 1m1.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-yf', 'dist-upgrade'] 1m36.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: barnowl-irc The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libcompress-raw-bzip2-perl libdb4.7 libdb4.8 libgssapi-krb5-2 libio-compress-perl libk5crypto3 libkrb5-3 libkrb5support0 liblzma2 libreadline6 libsub-name-perl libtext-autoformat-perl libtext-reform-perl libudev0 libzephyr4 sensible-utils xz-utils The following packages will be upgraded: adduser apt barnowl base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libarchive-zip-perl libattr1 libauthen-sasl-perl libblkid1 libbz2-1.0 libc6 libclass-accessor-perl libcomerr2 libcompress-raw-zlib-perl libcompress-zlib-perl libdb4.6 libdevmapper1.02.1 libdigest-hmac-perl libdigest-sha1-perl libgcc1 libgdbm3 libglib2.0-0 libgssapi-perl libhesiod0 libio-compress-base-perl libio-compress-zlib-perl libio-socket-ssl-perl libkeyutils1 libkrb53 liblocale-gettext-perl libmodule-scandeps-perl libncurses5 libncursesw5 libnet-dns-perl libnet-ssleay-perl libpam-modules libpam-runtime libpam0g libpar-dist-perl libpar-perl libpcre3 libperl5.10 libreadline5 libselinux1 libsepol1 libslang2 libss2 libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin netbase passwd perl perl-base perl-modules procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 98 upgraded, 23 newly installed, 1 to remove and 0 not upgraded. Need to get 49.8MB of archives. After this operation, 17.4MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main libmodule-scandeps-perl 0.98-1 [40.8kB] Get:18 http://piatti.debian.org squeeze/main perl-modules 5.10.1-17squeeze5 [3491kB] Get:19 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB] Get:20 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:21 http://piatti.debian.org squeeze/main libcompress-raw-bzip2-perl 2.024-1 [32.7kB] Get:22 http://piatti.debian.org squeeze/main libcompress-zlib-perl 2.024-1 [12.8kB] Get:23 http://piatti.debian.org squeeze/main libio-compress-zlib-perl 2.024-1 [12.8kB] Get:24 http://piatti.debian.org squeeze/main libio-compress-base-perl 2.024-1 [12.8kB] Get:25 http://piatti.debian.org squeeze/main libio-compress-perl 2.024-1 [251kB] Get:26 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:27 http://piatti.debian.org squeeze/main libcompress-raw-zlib-perl 2.026-1 [62.9kB] Get:28 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:29 http://piatti.debian.org squeeze/main perl 5.10.1-17squeeze5 [4441kB] Get:30 http://piatti.debian.org squeeze/main libperl5.10 5.10.1-17squeeze5 [1156B] Get:31 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:32 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:33 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:34 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:35 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:36 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:37 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:38 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:39 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:40 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:41 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:42 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:43 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:44 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:45 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:46 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:47 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:48 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:49 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:50 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:51 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:52 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:53 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:54 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:55 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:56 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:57 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:58 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:59 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:60 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:61 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:62 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:63 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:64 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:65 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:66 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:67 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:68 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:69 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:70 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:71 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:72 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:73 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:74 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:75 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:76 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:77 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:78 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:79 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:80 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:81 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:82 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:83 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:84 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:85 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:86 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:87 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze14 [1002kB] Get:88 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:89 http://piatti.debian.org squeeze/main netbase 4.45 [20.7kB] Get:90 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:91 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:92 http://piatti.debian.org squeeze/main libkeyutils1 1.4-1 [6942B] Get:93 http://piatti.debian.org squeeze/main libkrb53 1.8.3+dfsg-4squeeze6 [1373kB] Get:94 http://piatti.debian.org squeeze/main libkrb5support0 1.8.3+dfsg-4squeeze6 [46.4kB] Get:95 http://piatti.debian.org squeeze/main libk5crypto3 1.8.3+dfsg-4squeeze6 [106kB] Get:96 http://piatti.debian.org squeeze/main libkrb5-3 1.8.3+dfsg-4squeeze6 [374kB] Get:97 http://piatti.debian.org squeeze/main libgssapi-krb5-2 1.8.3+dfsg-4squeeze6 [130kB] Get:98 http://piatti.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:99 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:100 http://piatti.debian.org squeeze/main libglib2.0-0 2.24.2-1 [1122kB] Get:101 http://piatti.debian.org squeeze/main libzephyr4 3.0-1 [34.6kB] Get:102 http://piatti.debian.org squeeze/main libdigest-sha1-perl 2.13-1 [26.5kB] Get:103 http://piatti.debian.org squeeze/main libdigest-hmac-perl 1.02+dfsg-1 [11.8kB] Get:104 http://piatti.debian.org squeeze/main libnet-dns-perl 0.66-2 [298kB] Get:105 http://piatti.debian.org squeeze/main libauthen-sasl-perl 2.1500-1 [54.0kB] Get:106 http://piatti.debian.org squeeze/main libgssapi-perl 0.28-1 [70.9kB] Get:107 http://piatti.debian.org squeeze/main libnet-ssleay-perl 1.36-1 [213kB] Get:108 http://piatti.debian.org squeeze/main libio-socket-ssl-perl 1.33-1+squeeze1 [58.5kB] Get:109 http://piatti.debian.org squeeze/main libpar-dist-perl 0.45-1 [28.4kB] Get:110 http://piatti.debian.org squeeze/main libarchive-zip-perl 1.30-3 [96.7kB] Get:111 http://piatti.debian.org squeeze/main libpar-perl 1.000-1+squeeze1 [101kB] Get:112 http://piatti.debian.org squeeze/main libtext-reform-perl 1.20-1 [39.9kB] Get:113 http://piatti.debian.org squeeze/main libtext-autoformat-perl 1.669002-1 [34.1kB] Get:114 http://piatti.debian.org squeeze/main libsub-name-perl 0.04-1 [10.4kB] Get:115 http://piatti.debian.org squeeze/main libclass-accessor-perl 0.34-1 [25.9kB] Get:116 http://piatti.debian.org squeeze/main barnowl 1.6.2-1 [534kB] Get:117 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:118 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:119 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:120 http://piatti.debian.org squeeze/main libhesiod0 3.0.2-20 [24.0kB] Get:121 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 49.8MB in 3s (12.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7955 files and directories currently installed.) Removing barnowl-irc ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7945 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 7947 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 7948 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7956 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 7956 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 7966 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8008 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 8014 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8021 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 8017 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8029 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8029 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8052 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 8078 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8100 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8100 files and directories currently installed.) Preparing to replace libmodule-scandeps-perl 0.84-1 (using .../libmodule-scandeps-perl_0.98-1_all.deb) ... Unpacking replacement libmodule-scandeps-perl ... Preparing to replace perl-modules 5.10.0-19lenny5 (using .../perl-modules_5.10.1-17squeeze5_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libcompress-raw-bzip2-perl. (Reading database ... 8207 files and directories currently installed.) Unpacking libcompress-raw-bzip2-perl (from .../libcompress-raw-bzip2-perl_2.024-1_amd64.deb) ... Preparing to replace libcompress-zlib-perl 2.012-1 (using .../libcompress-zlib-perl_2.024-1_all.deb) ... Unpacking replacement libcompress-zlib-perl ... Preparing to replace libio-compress-zlib-perl 2.012-1 (using .../libio-compress-zlib-perl_2.024-1_all.deb) ... Unpacking replacement libio-compress-zlib-perl ... Preparing to replace libio-compress-base-perl 2.012-1 (using .../libio-compress-base-perl_2.024-1_all.deb) ... Unpacking replacement libio-compress-base-perl ... Selecting previously deselected package libio-compress-perl. Unpacking libio-compress-perl (from .../libio-compress-perl_2.024-1_all.deb) ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8231 files and directories currently installed.) Preparing to replace libcompress-raw-zlib-perl 2.012-1lenny1 (using .../libcompress-raw-zlib-perl_2.026-1_amd64.deb) ... Unpacking replacement libcompress-raw-zlib-perl ... Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace perl 5.10.0-19lenny5 (using .../perl_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl ... Preparing to replace libperl5.10 5.10.0-19lenny5 (using .../libperl5.10_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement libperl5.10 ... Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8301 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8301 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8302 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8302 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8302 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8319 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8323 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8323 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 8323 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8327 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8333 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8330 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8330 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8331 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8334 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8336 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8336 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Apr 5 18:32:27 UTC 2013. Universal Time is now: Fri Apr 5 18:32:27 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8342 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8346 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8347 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 8350 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8379 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130405T1832.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8380 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8398 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8401 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8403 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8405 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8405 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8411 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8408 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8408 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8409 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8409 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8406 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8406 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8406 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8407 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8358 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8358 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 8358 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8371 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8371 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8372 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8380 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8380 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8424 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8424 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8424 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8425 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8425 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8442 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8442 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8441 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny16 (using .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace netbase 4.34 (using .../archives/netbase_4.45_all.deb) ... Unpacking replacement netbase ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libkeyutils1 1.2-9 (using .../libkeyutils1_1.4-1_amd64.deb) ... Unpacking replacement libkeyutils1 ... Preparing to replace libkrb53 1.6.dfsg.4~beta1-5lenny7 (using .../libkrb53_1.8.3+dfsg-4squeeze6_all.deb) ... Unpacking replacement libkrb53 ... Selecting previously deselected package libkrb5support0. Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-4squeeze6_amd64.deb) ... Selecting previously deselected package libk5crypto3. Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-4squeeze6_amd64.deb) ... Selecting previously deselected package libkrb5-3. Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-4squeeze6_amd64.deb) ... Selecting previously deselected package libgssapi-krb5-2. Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.8.3+dfsg-4squeeze6_amd64.deb) ... Preparing to replace libpcre3 7.6-2.1 (using .../libpcre3_8.02-1.1_amd64.deb) ... Unpacking replacement libpcre3 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libglib2.0-0 2.16.6-3 (using .../libglib2.0-0_2.24.2-1_amd64.deb) ... Unpacking replacement libglib2.0-0 ... Selecting previously deselected package libzephyr4. Unpacking libzephyr4 (from .../libzephyr4_3.0-1_amd64.deb) ... Preparing to replace libdigest-sha1-perl 2.11-2+b1 (using .../libdigest-sha1-perl_2.13-1_amd64.deb) ... Unpacking replacement libdigest-sha1-perl ... Preparing to replace libdigest-hmac-perl 1.01-7 (using .../libdigest-hmac-perl_1.02+dfsg-1_all.deb) ... Unpacking replacement libdigest-hmac-perl ... Preparing to replace libnet-dns-perl 0.63-2 (using .../libnet-dns-perl_0.66-2_amd64.deb) ... Unpacking replacement libnet-dns-perl ... Preparing to replace libauthen-sasl-perl 2.12-1 (using .../libauthen-sasl-perl_2.1500-1_all.deb) ... Unpacking replacement libauthen-sasl-perl ... Preparing to replace libgssapi-perl 0.26-1 (using .../libgssapi-perl_0.28-1_amd64.deb) ... Unpacking replacement libgssapi-perl ... Preparing to replace libnet-ssleay-perl 1.35-1 (using .../libnet-ssleay-perl_1.36-1_amd64.deb) ... Unpacking replacement libnet-ssleay-perl ... Preparing to replace libio-socket-ssl-perl 1.16-1+lenny1 (using .../libio-socket-ssl-perl_1.33-1+squeeze1_all.deb) ... Unpacking replacement libio-socket-ssl-perl ... Preparing to replace libpar-dist-perl 0.31-1 (using .../libpar-dist-perl_0.45-1_all.deb) ... Unpacking replacement libpar-dist-perl ... Preparing to replace libarchive-zip-perl 1.18-1 (using .../libarchive-zip-perl_1.30-3_all.deb) ... Unpacking replacement libarchive-zip-perl ... Preparing to replace libpar-perl 0.980-1lenny1 (using .../libpar-perl_1.000-1+squeeze1_all.deb) ... Unpacking replacement libpar-perl ... Selecting previously deselected package libtext-reform-perl. Unpacking libtext-reform-perl (from .../libtext-reform-perl_1.20-1_all.deb) ... Selecting previously deselected package libtext-autoformat-perl. Unpacking libtext-autoformat-perl (from .../libtext-autoformat-perl_1.669002-1_all.deb) ... Selecting previously deselected package libsub-name-perl. Unpacking libsub-name-perl (from .../libsub-name-perl_0.04-1_amd64.deb) ... Preparing to replace libclass-accessor-perl 0.31-2 (using .../libclass-accessor-perl_0.34-1_all.deb) ... Unpacking replacement libclass-accessor-perl ... Preparing to replace barnowl 1.0.1-4+lenny2 (using .../barnowl_1.6.2-1_amd64.deb) ... Unpacking replacement barnowl ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace libhesiod0 3.0.2-18.3 (using .../libhesiod0_3.0.2-20_amd64.deb) ... Unpacking replacement libhesiod0 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libperl5.10 (5.10.1-17squeeze5) ... Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libudev0 (164-3) ... Setting up netbase (4.45) ... Installing new version of config file /etc/services ... Installing new version of config file /etc/protocols ... Installing new version of config file /etc/init.d/networking ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libkeyutils1 (1.4-1) ... Setting up libkrb5support0 (1.8.3+dfsg-4squeeze6) ... Setting up libk5crypto3 (1.8.3+dfsg-4squeeze6) ... Setting up libkrb5-3 (1.8.3+dfsg-4squeeze6) ... Setting up libgssapi-krb5-2 (1.8.3+dfsg-4squeeze6) ... Setting up libkrb53 (1.8.3+dfsg-4squeeze6) ... Setting up libpcre3 (8.02-1.1) ... Setting up ucf (3.0025+nmu1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libzephyr4 (3.0-1) ... Setting up libreadline5 (5.2-7) ... Setting up libhesiod0 (3.0.2-20) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... Setting up perl-modules (5.10.1-17squeeze5) ... Setting up perl (5.10.1-17squeeze5) ... Setting up libmodule-scandeps-perl (0.98-1) ... Setting up libcompress-raw-bzip2-perl (2.024-1) ... Setting up libcompress-raw-zlib-perl (2.026-1) ... Setting up libio-compress-perl (2.024-1) ... Setting up libcompress-zlib-perl (2.024-1) ... Setting up libio-compress-zlib-perl (2.024-1) ... Setting up libio-compress-base-perl (2.024-1) ... Setting up libdigest-sha1-perl (2.13-1) ... Setting up libdigest-hmac-perl (1.02+dfsg-1) ... Setting up libnet-dns-perl (0.66-2) ... Setting up libauthen-sasl-perl (2.1500-1) ... Setting up libgssapi-perl (0.28-1) ... Setting up libnet-ssleay-perl (1.36-1) ... Setting up libio-socket-ssl-perl (1.33-1+squeeze1) ... Setting up libpar-dist-perl (0.45-1) ... Setting up libarchive-zip-perl (1.30-3) ... Setting up libpar-perl (1.000-1+squeeze1) ... Setting up libtext-reform-perl (1.20-1) ... Setting up libtext-autoformat-perl (1.669002-1) ... Setting up libsub-name-perl (0.04-1) ... Setting up libclass-accessor-perl (0.34-1) ... Setting up barnowl (1.6.2-1) ... 1m36.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', '-yf', 'dist-upgrade'] 1m36.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'show', 'barnowl-irc'] 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-cache', 'show', 'barnowl-irc'] 1m37.2s INFO: apt-cache does not know about any of the requested packages 1m37.2s INFO: Running scripts post_distupgrade 1m37.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_exceptions'] 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_exceptions'] 1m37.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_experimental'] 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_experimental'] 1m37.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m37.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m37.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m37.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m37.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m38.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m38.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m38.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--get-selections', '*'] 1m38.3s DUMP: adduser install apt install barnowl install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libarchive-zip-perl install libattr1 install libauthen-sasl-perl install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libclass-accessor-perl install libcomerr2 install libcompress-raw-bzip2-perl install libcompress-raw-zlib-perl install libcompress-zlib-perl install libdb4.6 install libdb4.7 install libdb4.8 install libdevmapper1.02.1 install libdigest-hmac-perl install libdigest-sha1-perl install libgcc1 install libgdbm3 install libgetopt-argvfile-perl install libglib2.0-0 install libgssapi-krb5-2 install libgssapi-perl install libhesiod0 install libio-compress-base-perl install libio-compress-perl install libio-compress-zlib-perl install libio-socket-ssl-perl install libk5crypto3 install libkeyutils1 install libkrb5-3 install libkrb53 install libkrb5support0 install liblocale-gettext-perl install liblzma2 install libmodule-scandeps-perl install libncurses5 install libncursesw5 install libnet-dns-perl install libnet-ip-perl install libnet-irc-perl install libnet-ssleay-perl install libpam-modules install libpam-runtime install libpam0g install libpar-dist-perl install libpar-perl install libpcre3 install libperl5.10 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libsub-name-perl install libtext-autoformat-perl install libtext-charwidth-perl install libtext-iconv-perl install libtext-reform-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libzephyr3 install libzephyr4 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install netbase install passwd install perl install perl-base install perl-modules install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m38.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--get-selections', '*'] 1m39.4s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpZZgR6i', '-ac'] 1m40.3s DUMP: debsums: no md5sums for mawk debsums: no md5sums for netbase 1m40.3s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpZZgR6i', '-ac'] 1m40.3s INFO: Running scripts pre_remove 1m40.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m40.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m40.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m40.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m40.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m40.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m40.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_exceptions'] 1m40.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/pre_remove_exceptions'] 1m40.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'remove', 'libgetopt-argvfile-perl', 'libhesiod0', 'libnet-irc-perl', 'libk5crypto3', 'libnet-ssleay-perl', 'libio-socket-ssl-perl', 'barnowl', 'libdigest-sha1-perl', 'libtext-autoformat-perl', 'libpar-dist-perl', 'libglib2.0-0', 'libio-compress-perl', 'libkrb5support0', 'libclass-accessor-perl', 'libio-compress-base-perl', 'libdigest-hmac-perl', 'libtext-reform-perl', 'libgssapi-perl', 'perl', 'libkrb5-3', 'netbase', 'libgdbm3', 'libnet-ip-perl', 'libkeyutils1', 'libssl0.9.8', 'libarchive-zip-perl', 'libcompress-zlib-perl', 'libsub-name-perl', 'libpcre3', 'libkrb53', 'libcompress-raw-bzip2-perl', 'libauthen-sasl-perl', 'libio-compress-zlib-perl', 'libgssapi-krb5-2', 'perl-modules', 'libzephyr4', 'libzephyr3', 'libperl5.10', 'libnet-dns-perl', 'libdb4.7', 'libcompress-raw-zlib-perl', 'libpar-perl', 'libmodule-scandeps-perl'] 1m42.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: barnowl libarchive-zip-perl libauthen-sasl-perl libclass-accessor-perl libcompress-raw-bzip2-perl libcompress-raw-zlib-perl libcompress-zlib-perl libdb4.7 libdigest-hmac-perl libdigest-sha1-perl libgdbm3 libgetopt-argvfile-perl libglib2.0-0 libgssapi-krb5-2 libgssapi-perl libhesiod0 libio-compress-base-perl libio-compress-perl libio-compress-zlib-perl libio-socket-ssl-perl libk5crypto3 libkeyutils1 libkrb5-3 libkrb53 libkrb5support0 libmodule-scandeps-perl libnet-dns-perl libnet-ip-perl libnet-irc-perl libnet-ssleay-perl libpar-dist-perl libpar-perl libpcre3 libperl5.10 libssl0.9.8 libsub-name-perl libtext-autoformat-perl libtext-reform-perl libzephyr3 libzephyr4 netbase perl perl-modules 0 upgraded, 0 newly installed, 43 to remove and 0 not upgraded. After this operation, 52.4 MB disk space will be freed. (Reading database ... 8596 files and directories currently installed.) Removing barnowl ... Removing libpar-perl ... Removing libarchive-zip-perl ... Removing libauthen-sasl-perl ... Removing libclass-accessor-perl ... Removing libio-compress-perl ... Removing libcompress-raw-bzip2-perl ... Removing libcompress-raw-zlib-perl ... Removing libcompress-zlib-perl ... Removing libtext-autoformat-perl ... Removing libtext-reform-perl ... Removing libsub-name-perl ... Removing libpar-dist-perl ... Removing libio-socket-ssl-perl ... Removing libnet-ssleay-perl ... Removing libnet-irc-perl ... Removing libnet-dns-perl ... Removing libnet-ip-perl ... Removing libmodule-scandeps-perl ... Removing libgssapi-perl ... Removing libgetopt-argvfile-perl ... Removing libdigest-hmac-perl ... Removing libdigest-sha1-perl ... Removing libio-compress-zlib-perl ... Removing libio-compress-base-perl ... Removing libglib2.0-0 ... Removing libkrb53 ... Removing libgssapi-krb5-2 ... Removing libzephyr3 ... Removing libhesiod0 ... Removing libkrb5-3 ... Removing libk5crypto3 ... Removing libkrb5support0 ... Removing libkeyutils1 ... Removing libpcre3 ... Removing libperl5.10 ... Removing libssl0.9.8 ... Removing libzephyr4 ... Removing netbase ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 1m42.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'remove', 'libgetopt-argvfile-perl', 'libhesiod0', 'libnet-irc-perl', 'libk5crypto3', 'libnet-ssleay-perl', 'libio-socket-ssl-perl', 'barnowl', 'libdigest-sha1-perl', 'libtext-autoformat-perl', 'libpar-dist-perl', 'libglib2.0-0', 'libio-compress-perl', 'libkrb5support0', 'libclass-accessor-perl', 'libio-compress-base-perl', 'libdigest-hmac-perl', 'libtext-reform-perl', 'libgssapi-perl', 'perl', 'libkrb5-3', 'netbase', 'libgdbm3', 'libnet-ip-perl', 'libkeyutils1', 'libssl0.9.8', 'libarchive-zip-perl', 'libcompress-zlib-perl', 'libsub-name-perl', 'libpcre3', 'libkrb53', 'libcompress-raw-bzip2-perl', 'libauthen-sasl-perl', 'libio-compress-zlib-perl', 'libgssapi-krb5-2', 'perl-modules', 'libzephyr4', 'libzephyr3', 'libperl5.10', 'libnet-dns-perl', 'libdb4.7', 'libcompress-raw-zlib-perl', 'libpar-perl', 'libmodule-scandeps-perl'] 1m42.2s INFO: Running scripts post_remove 1m42.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_remove_exceptions'] 1m42.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_remove_exceptions'] 1m42.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--purge', 'libgetopt-argvfile-perl', 'libhesiod0', 'libnet-irc-perl', 'libk5crypto3', 'libnet-ssleay-perl', 'libio-socket-ssl-perl', 'barnowl', 'libdigest-sha1-perl', 'libtext-autoformat-perl', 'libpar-dist-perl', 'libglib2.0-0', 'libio-compress-perl', 'libkrb5support0', 'libclass-accessor-perl', 'libio-compress-base-perl', 'libdigest-hmac-perl', 'libtext-reform-perl', 'libgssapi-perl', 'perl', 'libkrb5-3', 'netbase', 'libgdbm3', 'libnet-ip-perl', 'libkeyutils1', 'libssl0.9.8', 'libarchive-zip-perl', 'libcompress-zlib-perl', 'libsub-name-perl', 'libpcre3', 'libkrb53', 'libcompress-raw-bzip2-perl', 'libauthen-sasl-perl', 'libio-compress-zlib-perl', 'libgssapi-krb5-2', 'perl-modules', 'libzephyr4', 'libzephyr3', 'libperl5.10', 'libnet-dns-perl', 'libdb4.7', 'libcompress-raw-zlib-perl', 'libpar-perl', 'libmodule-scandeps-perl'] 1m42.8s DUMP: dpkg: warning: ignoring request to remove libgetopt-argvfile-perl which isn't installed. (Reading database ... 6426 files and directories currently installed.) Removing libhesiod0 ... Purging configuration files for libhesiod0 ... dpkg: warning: ignoring request to remove libnet-irc-perl which isn't installed. Removing libk5crypto3 ... Purging configuration files for libk5crypto3 ... dpkg: warning: ignoring request to remove libnet-ssleay-perl which isn't installed. dpkg: warning: ignoring request to remove libio-socket-ssl-perl which isn't installed. dpkg: warning: ignoring request to remove barnowl which isn't installed. dpkg: warning: ignoring request to remove libdigest-sha1-perl which isn't installed. dpkg: warning: ignoring request to remove libtext-autoformat-perl which isn't installed. dpkg: warning: ignoring request to remove libpar-dist-perl which isn't installed. Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... dpkg: warning: ignoring request to remove libio-compress-perl which isn't installed. Removing libkrb5support0 ... Purging configuration files for libkrb5support0 ... dpkg: warning: ignoring request to remove libclass-accessor-perl which isn't installed. dpkg: warning: ignoring request to remove libio-compress-base-perl which isn't installed. dpkg: warning: ignoring request to remove libdigest-hmac-perl which isn't installed. dpkg: warning: ignoring request to remove libtext-reform-perl which isn't installed. dpkg: warning: ignoring request to remove libgssapi-perl which isn't installed. dpkg: warning: ignoring request to remove perl which isn't installed. Removing libkrb5-3 ... Purging configuration files for libkrb5-3 ... Removing netbase ... Purging configuration files for netbase ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... dpkg: warning: ignoring request to remove libnet-ip-perl which isn't installed. Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... dpkg: warning: ignoring request to remove libarchive-zip-perl which isn't installed. dpkg: warning: ignoring request to remove libcompress-zlib-perl which isn't installed. dpkg: warning: ignoring request to remove libsub-name-perl which isn't installed. Removing libpcre3 ... Purging configuration files for libpcre3 ... dpkg: warning: ignoring request to remove libkrb53 which isn't installed. dpkg: warning: ignoring request to remove libcompress-raw-bzip2-perl which isn't installed. dpkg: warning: ignoring request to remove libauthen-sasl-perl which isn't installed. dpkg: warning: ignoring request to remove libio-compress-zlib-perl which isn't installed. Removing libgssapi-krb5-2 ... Purging configuration files for libgssapi-krb5-2 ... Removing perl-modules ... Purging configuration files for perl-modules ... Removing libzephyr4 ... Purging configuration files for libzephyr4 ... Removing libzephyr3 ... Purging configuration files for libzephyr3 ... dpkg: warning: ignoring request to remove libperl5.10 which isn't installed. dpkg: warning: ignoring request to remove libnet-dns-perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. dpkg: warning: ignoring request to remove libcompress-raw-zlib-perl which isn't installed. dpkg: warning: ignoring request to remove libpar-perl which isn't installed. dpkg: warning: ignoring request to remove libmodule-scandeps-perl which isn't installed. 1m42.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--purge', 'libgetopt-argvfile-perl', 'libhesiod0', 'libnet-irc-perl', 'libk5crypto3', 'libnet-ssleay-perl', 'libio-socket-ssl-perl', 'barnowl', 'libdigest-sha1-perl', 'libtext-autoformat-perl', 'libpar-dist-perl', 'libglib2.0-0', 'libio-compress-perl', 'libkrb5support0', 'libclass-accessor-perl', 'libio-compress-base-perl', 'libdigest-hmac-perl', 'libtext-reform-perl', 'libgssapi-perl', 'perl', 'libkrb5-3', 'netbase', 'libgdbm3', 'libnet-ip-perl', 'libkeyutils1', 'libssl0.9.8', 'libarchive-zip-perl', 'libcompress-zlib-perl', 'libsub-name-perl', 'libpcre3', 'libkrb53', 'libcompress-raw-bzip2-perl', 'libauthen-sasl-perl', 'libio-compress-zlib-perl', 'libgssapi-krb5-2', 'perl-modules', 'libzephyr4', 'libzephyr3', 'libperl5.10', 'libnet-dns-perl', 'libdb4.7', 'libcompress-raw-zlib-perl', 'libpar-perl', 'libmodule-scandeps-perl'] 1m42.8s INFO: Running scripts post_purge 1m42.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_purge_exceptions'] 1m42.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'tmp/scripts/post_purge_exceptions'] 1m42.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--purge', '--pending'] 1m42.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--purge', '--pending'] 1m42.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--remove', '--pending'] 1m42.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg', '--remove', '--pending'] 1m42.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m43.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg-divert', '--list'] 1m43.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'dpkg-divert', '--list'] 1m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'clean'] 1m43.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'apt-get', 'clean'] 1m44.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'umount', '/proc'] 1m44.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpZZgR6i', 'umount', '/proc'] 1m44.4s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m44.7s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpZZgR6i'] 1m44.7s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpZZgR6i 1m44.7s INFO: PASS: Upgrading between Debian distributions. 1m44.7s INFO: PASS: All tests. 1m44.7s INFO: piuparts run ends. ret=0 End: 2013-04-05 18:32:49 UTC