Start: 2011-01-07 20:49:59 UTC Package: courier-filter-perl Priority: optional Section: mail Installed-Size: 464 Maintainer: Julian Mehnle Architecture: all Version: 0.200 Depends: courier-mta, perl (>= 5.8), liberror-perl Recommends: libnet-rblclient-perl, libmail-spf-perl, libmime-tools-perl (>= 5.400), libio-stringy-perl (>= 2.110), libclamav-client-perl, libmail-spamassassin-perl, libarchive-zip-perl Suggests: libnet-address-ip-local-perl Filename: pool/main/c/courier-filter-perl/courier-filter-perl_0.200_all.deb Size: 140400 MD5sum: 2c5c9fac889a7f2f238f71cd0d8e614b SHA1: 6bd1aca7d25729cfc26d150a0ef67f1551ff5288 SHA256: 4c1272bc2a1f41ecfb47152da628a1fd93317631c7097c0552a1872b5c2bd5d8 Description: purely Perl-based mail filter framework for the Courier MTA Courier::Filter implements the Courier MTA's courierfilter interface as a framework for mail filter modules. Authors of filter modules can concentrate on writing the actual filter logic without having to care about the usual low-level details of the courierfilter interface. Logging to various facilities is also supported. . Courier::Filter allows multiple filter modules to be installed in stacked and hierarchically grouped configurations. Also, modules' polarity can be reversed, so some modules can be used for explicitly accepting messages while others are used in the traditional way for rejecting messages. . The following filter modules are included: * BlankBody: matching of blank bodies (a stupid spammer symptom) * DNSBL: matching of calling MTA's IP address against DNS black-lists * SPF: authentication of sender addresses in inbound messages * SPFout: authentication of sender addresses in outbound messages * Envelope: matching of RFC 2821 message envelope fields * Header: matching of RFC 2822 message header fields * FakeDate: detection of implausible and malformed date header fields * ClamAVd: malware detection using the ClamAV scanner * SpamAssassin: spam detection using SpamAssassin * Parts: matching of MIME parts and ZIP archive contents * SendCopy: sending message copies to additional recipients Tag: implemented-in::perl, interface::daemon, mail::filters, network::server, role::program, security::antivirus, use::scanning, works-with::mail Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ courier-filter-perl Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.40~201101041815 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ courier-filter-perl 0m0.0s INFO: Running on: Linux piatti 2.6.32.27-dsa-amd64 #1 SMP Mon Dec 13 10:07:36 UTC 2010 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp1lCv-P 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmp1lCv-P 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp1lCv-P', '-zxf', 'lenny.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp1lCv-P', '-zxf', 'lenny.tar.gz'] 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'update'] 0m1.7s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m1.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'update'] 0m1.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', '-yf', 'upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', '-yf', 'upgrade'] 0m2.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'clean'] 0m2.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'clean'] 0m2.1s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmp1lCv-P/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp1lCv-P to squeeze 0m2.1s INFO: Running scripts pre_distupgrade 0m2.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'update'] 0m4.6s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8614kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.5kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8894kB in 1s (8555kB/s) Reading package lists... 0m4.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'update'] 0m4.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', '-yf', 'dist-upgrade'] 0m30.8s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.4MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 5.10 [68.6kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-4 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-16 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-4 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13 [121kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13 [70.0kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13 [73.8kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13 [119kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-4 [187kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-4 [389kB] Get:74 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:75 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.4MB in 0s (46.9MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5894 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_5.10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (5.10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5896 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5897 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5905 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5905 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5915 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5957 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5963 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5970 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5966 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6001 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6027 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-16_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6115 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6119 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6123 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6129 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6127 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6130 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jan 7 20:50:19 UTC 2011. Universal Time is now: Fri Jan 7 20:50:19 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6135 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6139 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6143 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110107T2050.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6191 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6196 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6204 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6200 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6150 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6163 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6233 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-4_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-4) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m30.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', '-yf', 'dist-upgrade'] 0m30.8s INFO: Running scripts post_distupgrade 0m30.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp1lCv-P'] 0m31.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp1lCv-P'] 0m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'clean'] 0m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'apt-get', 'clean'] 0m31.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'dpkg', '--get-selections', '*'] 0m31.8s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'dpkg', '--get-selections', '*'] 0m31.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'umount', '/proc'] 0m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp1lCv-P', 'umount', '/proc'] 0m32.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp1lCv-P 0m32.2s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpF5B-CL 0m32.2s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpF5B-CL 0m32.2s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpF5B-CL', '-zxf', 'lenny.tar.gz'] 0m34.3s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpF5B-CL', '-zxf', 'lenny.tar.gz'] 0m34.3s DEBUG: Created policy-rc.d and chmodded it. 0m34.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m34.4s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m34.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m34.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'mount', '-t', 'proc', 'proc', '/proc'] 0m34.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'mount', '-t', 'proc', 'proc', '/proc'] 0m34.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-yf', 'upgrade'] 0m34.7s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m34.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-yf', 'upgrade'] 0m34.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'clean'] 0m34.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'clean'] 0m34.7s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpF5B-CL/tmp/scripts/ 0m34.7s INFO: Running scripts post_setup 0m34.7s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m34.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 0m35.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 0m35.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m35.0s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m35.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m35.0s INFO: Running scripts pre_install 0m35.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_install_exceptions'] 0m35.0s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m35.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_install_exceptions'] 0m35.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-y', 'install', 'courier-filter-perl'] 0m38.0s DUMP: Reading package lists... Building dependency tree... The following extra packages will be installed: courier-authdaemon courier-authlib courier-authlib-userdb courier-base courier-mta expect liberror-perl libfam0 libgdbm3 libltdl3 libperl5.10 perl perl-modules tcl8.4 Suggested packages: libnet-address-ip-local-perl mail-reader courier-doc expectk perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl tclreadline Recommended packages: libnet-rblclient-perl libmail-spf-perl libmime-tools-perl libio-stringy-perl libclamav-client-perl libmail-spamassassin-perl libarchive-zip-perl fam netbase The following NEW packages will be installed: courier-authdaemon courier-authlib courier-authlib-userdb courier-base courier-filter-perl courier-mta expect liberror-perl libfam0 libgdbm3 libltdl3 libperl5.10 perl perl-modules tcl8.4 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. Need to get 12.2MB of archives. After this operation, 44.0MB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:2 http://piatti.debian.org lenny/main perl-modules 5.10.0-19lenny2 [3198kB] Get:3 http://piatti.debian.org lenny/main perl 5.10.0-19lenny2 [5220kB] Get:4 http://piatti.debian.org lenny/main libltdl3 1.5.26-4+lenny1 [180kB] Get:5 http://piatti.debian.org lenny/main tcl8.4 8.4.19-2 [1201kB] Get:6 http://piatti.debian.org lenny/main expect 5.43.0-17 [341kB] Get:7 http://piatti.debian.org lenny/main courier-authlib 0.61.0-1+lenny1 [78.3kB] Get:8 http://piatti.debian.org lenny/main courier-authdaemon 0.61.0-1+lenny1 [7328B] Get:9 http://piatti.debian.org lenny/main courier-authlib-userdb 0.61.0-1+lenny1 [34.0kB] Get:10 http://piatti.debian.org lenny/main libfam0 2.7.0-13.3+lenny1 [28.5kB] Get:11 http://piatti.debian.org lenny/main courier-base 0.60.0-2 [233kB] Get:12 http://piatti.debian.org lenny/main libperl5.10 5.10.0-19lenny2 [1018B] Get:13 http://piatti.debian.org lenny/main courier-mta 0.60.0-2 [1462kB] Get:14 http://piatti.debian.org lenny/main liberror-perl 0.17-1 [23.6kB] Get:15 http://piatti.debian.org lenny/main courier-filter-perl 0.200 [140kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.2MB in 0s (32.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libgdbm3. (Reading database ... 5894 files and directories currently installed.) Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny2_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-19lenny2_amd64.deb) ... Selecting previously deselected package libltdl3. Unpacking libltdl3 (from .../libltdl3_1.5.26-4+lenny1_amd64.deb) ... Selecting previously deselected package tcl8.4. Unpacking tcl8.4 (from .../tcl8.4_8.4.19-2_amd64.deb) ... Selecting previously deselected package expect. Unpacking expect (from .../expect_5.43.0-17_amd64.deb) ... Selecting previously deselected package courier-authlib. Unpacking courier-authlib (from .../courier-authlib_0.61.0-1+lenny1_amd64.deb) ... Selecting previously deselected package courier-authdaemon. Unpacking courier-authdaemon (from .../courier-authdaemon_0.61.0-1+lenny1_amd64.deb) ... Selecting previously deselected package courier-authlib-userdb. Unpacking courier-authlib-userdb (from .../courier-authlib-userdb_0.61.0-1+lenny1_amd64.deb) ... Selecting previously deselected package libfam0. Unpacking libfam0 (from .../libfam0_2.7.0-13.3+lenny1_amd64.deb) ... Selecting previously deselected package courier-base. Unpacking courier-base (from .../courier-base_0.60.0-2_amd64.deb) ... Selecting previously deselected package libperl5.10. Unpacking libperl5.10 (from .../libperl5.10_5.10.0-19lenny2_amd64.deb) ... Selecting previously deselected package courier-mta. Unpacking courier-mta (from .../courier-mta_0.60.0-2_amd64.deb) ... Adding `diversion of /usr/bin/addcr to /usr/bin/addcr.ucspi-tcp by courier-mta' Adding `diversion of /usr/share/man/man1/addcr.1.g to /usr/share/man/man1/addcr.ucspi-tcp.1.gz by courier-mta' Selecting previously deselected package liberror-perl. Unpacking liberror-perl (from .../liberror-perl_0.17-1_all.deb) ... Selecting previously deselected package courier-filter-perl. Unpacking courier-filter-perl (from .../courier-filter-perl_0.200_all.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgdbm3 (1.8.3-3) ... Setting up libltdl3 (1.5.26-4+lenny1) ... Setting up tcl8.4 (8.4.19-2) ... Setting up expect (5.43.0-17) ... Setting up courier-authlib (0.61.0-1+lenny1) ... Setting up courier-authdaemon (0.61.0-1+lenny1) ... Setting up courier-authlib-userdb (0.61.0-1+lenny1) ... Setting up libfam0 (2.7.0-13.3+lenny1) ... Setting up libperl5.10 (5.10.0-19lenny2) ... Setting up perl-modules (5.10.0-19lenny2) ... Setting up perl (5.10.0-19lenny2) ... Setting up courier-base (0.60.0-2) ... Setting up courier-mta (0.60.0-2) ... Setting up liberror-perl (0.17-1) ... Setting up courier-filter-perl (0.200) ... Starting courier-filter-perl mail filter ... 0m38.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-y', 'install', 'courier-filter-perl'] 0m38.0s INFO: Running scripts pre_upgrade 0m38.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_upgrade_exceptions'] 0m38.0s DUMP: Debug: running script tmp/scripts/pre_upgrade_exceptions 0m38.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_upgrade_exceptions'] 0m38.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 0m38.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 0m38.4s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpF5B-CL to squeeze 0m38.4s INFO: Running scripts pre_distupgrade 0m38.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m40.5s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8614kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.5kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8894kB in 0s (9500kB/s) Reading package lists... 0m40.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'update'] 0m40.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-yf', 'dist-upgrade'] 1m20.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.7 libdb4.8 libltdl7 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils tcl8.5 xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils courier-authdaemon courier-authlib courier-authlib-userdb courier-base courier-mta debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs expect findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libfam0 libgcc1 libgdbm3 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libperl5.10 libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl perl-base perl-modules procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tcl8.4 tzdata util-linux zlib1g 79 upgraded, 16 newly installed, 0 to remove and 0 not upgraded. Need to get 51.3MB of archives. After this operation, 29.7MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 5.10 [68.6kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-4 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-modules 5.10.1-16 [3481kB] Get:18 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB] Get:19 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:20 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:21 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:22 http://piatti.debian.org squeeze/main perl 5.10.1-16 [4461kB] Get:23 http://piatti.debian.org squeeze/main libperl5.10 5.10.1-16 [1150B] Get:24 http://piatti.debian.org squeeze/main perl-base 5.10.1-16 [1066kB] Get:25 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:26 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:27 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:28 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:29 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:30 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:31 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:32 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:33 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:34 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:35 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:36 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:37 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:38 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:39 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-4 [320kB] Get:40 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:41 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:42 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13 [121kB] Get:43 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:44 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13 [70.0kB] Get:45 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:46 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13 [73.8kB] Get:47 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:48 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:49 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:50 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:51 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:52 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:53 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:54 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:55 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13 [119kB] Get:56 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:57 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:58 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:59 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:60 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:61 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-4 [187kB] Get:62 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:63 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:64 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:65 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:66 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:67 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:68 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:69 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:70 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:71 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:72 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:73 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:74 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:75 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:76 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:77 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:78 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-4 [389kB] Get:79 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:80 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:81 http://piatti.debian.org squeeze/main libltdl7 2.2.6b-2 [296kB] Get:82 http://piatti.debian.org squeeze/main tcl8.5 8.5.8-2 [1599kB] Get:83 http://piatti.debian.org squeeze/main expect 5.44.1.15-4 [250kB] Get:84 http://piatti.debian.org squeeze/main courier-authlib 0.63.0-3 [83.2kB] Get:85 http://piatti.debian.org squeeze/main courier-authdaemon 0.63.0-3 [8250B] Get:86 http://piatti.debian.org squeeze/main courier-authlib-userdb 0.63.0-3 [36.7kB] Get:87 http://piatti.debian.org squeeze/main libfam0 2.7.0-17 [28.8kB] Get:88 http://piatti.debian.org squeeze/main courier-base 0.65.0-3 [245kB] Get:89 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:90 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:91 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:92 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:93 http://piatti.debian.org squeeze/main tcl8.4 8.4.19-4 [1206kB] Get:94 http://piatti.debian.org squeeze/main courier-mta 0.65.0-3 [4473kB] Get:95 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 51.3MB in 2s (20.0MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7594 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_5.10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (5.10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 7596 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Restarting services possibly affected by the upgrade: courier-authdaemon: restarting...done. Services restarted successfully. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 7597 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7605 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 7605 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 7615 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7657 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 7663 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7670 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 7666 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7678 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7678 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7701 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 7727 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7749 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7749 files and directories currently installed.) Preparing to replace perl-modules 5.10.0-19lenny2 (using .../perl-modules_5.10.1-16_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7855 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7858 files and directories currently installed.) Preparing to replace perl 5.10.0-19lenny2 (using .../perl_5.10.1-16_amd64.deb) ... Unpacking replacement perl ... Preparing to replace libperl5.10 5.10.0-19lenny2 (using .../libperl5.10_5.10.1-16_amd64.deb) ... Unpacking replacement libperl5.10 ... Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-16_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7925 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7925 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7926 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7926 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7926 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7943 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7947 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Restarting services possibly affected by the upgrade: courier-authdaemon: stopping...starting...done. Services restarted successfully. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7947 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 7947 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7951 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7957 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7954 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7954 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7955 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7958 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7960 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7960 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jan 7 20:50:56 UTC 2011. Universal Time is now: Fri Jan 7 20:50:56 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7963 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7967 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7968 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 7971 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8000 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110107T2050.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8001 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8019 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8022 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8024 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8026 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8026 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8032 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8029 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8029 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8030 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8030 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8027 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8027 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8027 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8028 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7978 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7978 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 7978 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7991 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7991 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7992 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8000 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8000 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8044 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8044 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8044 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8045 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8045 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8062 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8062 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 8061 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-4_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libltdl7. Unpacking libltdl7 (from .../libltdl7_2.2.6b-2_amd64.deb) ... Selecting previously deselected package tcl8.5. Unpacking tcl8.5 (from .../tcl8.5_8.5.8-2_amd64.deb) ... Preparing to replace expect 5.43.0-17 (using .../expect_5.44.1.15-4_amd64.deb) ... Unpacking replacement expect ... Preparing to replace courier-authlib 0.61.0-1+lenny1 (using .../courier-authlib_0.63.0-3_amd64.deb) ... Unpacking replacement courier-authlib ... Preparing to replace courier-authdaemon 0.61.0-1+lenny1 (using .../courier-authdaemon_0.63.0-3_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement courier-authdaemon ... dpkg: warning: unable to delete old directory '/var/run/courier': Directory not empty Preparing to replace courier-authlib-userdb 0.61.0-1+lenny1 (using .../courier-authlib-userdb_0.63.0-3_amd64.deb) ... Unpacking replacement courier-authlib-userdb ... Preparing to replace libfam0 2.7.0-13.3+lenny1 (using .../libfam0_2.7.0-17_amd64.deb) ... Unpacking replacement libfam0 ... Preparing to replace courier-base 0.60.0-2 (using .../courier-base_0.65.0-3_amd64.deb) ... Unpacking replacement courier-base ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace tcl8.4 8.4.19-2 (using .../tcl8.4_8.4.19-4_amd64.deb) ... Unpacking replacement tcl8.4 ... Preparing to replace courier-mta 0.60.0-2 (using .../courier-mta_0.65.0-3_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement courier-mta ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libperl5.10 (5.10.1-16) ... Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-4) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libltdl7 (2.2.6b-2) ... Setting up tcl8.5 (8.5.8-2) ... update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode. Setting up expect (5.44.1.15-4) ... Setting up courier-authlib (0.63.0-3) ... Setting up courier-authdaemon (0.63.0-3) ... Installing new version of config file /etc/init.d/courier-authdaemon ... invoke-rc.d: policy-rc.d denied execution of start. Setting up courier-authlib-userdb (0.63.0-3) ... Setting up libfam0 (2.7.0-17) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up tcl8.4 (8.4.19-4) ... update-alternatives: using /usr/bin/tclsh8.4 to provide /usr/bin/tclsh (tclsh) in auto mode. Setting up makedev (2.3.1-89) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... Setting up perl-modules (5.10.1-16) ... Setting up dmsetup (2:1.02.48-4) ... Setting up perl (5.10.1-16) ... Setting up courier-base (0.65.0-3) ... update-alternatives: using /usr/bin/deliverquota.courier to provide /usr/bin/deliverquota (deliverquota) in auto mode. update-alternatives: using /usr/share/man/man5/maildir.courier.5.gz to provide /usr/share/man/man5/maildir.5.gz (maildir.5.gz) in auto mode. update-alternatives: using /usr/bin/maildirmake.courier to provide /usr/bin/maildirmake (maildirmake) in auto mode. update-alternatives: using /usr/share/man/man7/maildirquota.courier.7.gz to provide /usr/share/man/man7/maildirquota.7.gz (maildirquota.7.gz) in auto mode. update-alternatives: using /usr/bin/makedat.courier to provide /usr/bin/makedat (makedat) in auto mode. Setting up courier-mta (0.65.0-3) ... Installing new version of config file /etc/courier/esmtpd ... Installing new version of config file /etc/courier/rfcerrheader.txt ... Installing new version of config file /etc/courier/dsnheader.txt ... Installing new version of config file /etc/courier/courierd ... Installing new version of config file /etc/init.d/courier-mta ... update-alternatives: using /usr/bin/lockmail.courier to provide /usr/bin/lockmail (lockmail) in auto mode. update-alternatives: using /usr/bin/preline.courier to provide /usr/bin/preline (preline) in auto mode. invoke-rc.d: policy-rc.d denied execution of start. 1m20.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-yf', 'dist-upgrade'] 1m20.5s INFO: Running scripts pre_install 1m20.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_install_exceptions'] 1m20.5s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 1m20.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_install_exceptions'] 1m20.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-y', 'install', 'courier-filter-perl'] 1m22.1s DUMP: Reading package lists... Building dependency tree... Reading state information... courier-filter-perl is already the newest version. The following packages were automatically installed and are no longer required: tcl8.4 libltdl3 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m22.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', '-y', 'install', 'courier-filter-perl'] 1m22.1s INFO: Running scripts post_distupgrade 1m22.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m22.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m22.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m22.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m22.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'clean'] 1m24.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'apt-get', 'clean'] 1m24.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m24.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m24.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--get-selections', '*'] 1m24.4s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install courier-authdaemon install courier-authlib install courier-authlib-userdb install courier-base install courier-filter-perl install courier-mta install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install expect install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.7 install libdb4.8 install libdevmapper1.02.1 install liberror-perl install libfam0 install libgcc1 install libgdbm3 install liblocale-gettext-perl install libltdl3 install libltdl7 install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libperl5.10 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tcl8.4 install tcl8.5 install tzdata install util-linux install xz-utils install zlib1g install 1m24.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--get-selections', '*'] 1m24.4s INFO: Running scripts pre_remove 1m24.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_remove_exceptions'] 1m24.4s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 1m24.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/pre_remove_exceptions'] 1m24.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libltdl7'] 1m26.3s DUMP: dpkg: dependency problems prevent removal of libltdl7: courier-authlib depends on libltdl7 (>= 2.2.6b). dpkg: error processing libltdl7 (--remove): dependency problems - not removing Errors were encountered while processing: libltdl7 1m26.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libltdl7'] 1m26.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-base'] 1m28.9s DUMP: dpkg: dependency problems prevent removal of courier-base: courier-mta depends on courier-base (>= 0.65.0). dpkg: error processing courier-base (--remove): dependency problems - not removing Errors were encountered while processing: courier-base 1m28.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-base'] 1m28.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authlib-userdb'] 1m29.1s DUMP: dpkg: dependency problems prevent removal of courier-authlib-userdb: courier-base depends on courier-authlib-userdb. dpkg: error processing courier-authlib-userdb (--remove): dependency problems - not removing Errors were encountered while processing: courier-authlib-userdb 1m29.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authlib-userdb'] 1m29.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'liberror-perl'] 1m29.2s DUMP: dpkg: dependency problems prevent removal of liberror-perl: courier-filter-perl depends on liberror-perl. dpkg: error processing liberror-perl (--remove): dependency problems - not removing Errors were encountered while processing: liberror-perl 1m29.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'liberror-perl'] 1m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authdaemon'] 1m29.2s DUMP: dpkg: dependency problems prevent removal of courier-authdaemon: courier-base depends on courier-authdaemon. dpkg: error processing courier-authdaemon (--remove): dependency problems - not removing Errors were encountered while processing: courier-authdaemon 1m29.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authdaemon'] 1m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libperl5.10'] 1m29.2s DUMP: dpkg: dependency problems prevent removal of libperl5.10: courier-mta depends on libperl5.10 (>= 5.10.1). dpkg: error processing libperl5.10 (--remove): dependency problems - not removing Errors were encountered while processing: libperl5.10 1m29.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libperl5.10'] 1m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-mta'] 1m29.2s DUMP: dpkg: dependency problems prevent removal of courier-mta: courier-filter-perl depends on courier-mta. dpkg: error processing courier-mta (--remove): dependency problems - not removing Errors were encountered while processing: courier-mta 1m29.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-mta'] 1m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libfam0'] 1m29.3s DUMP: dpkg: dependency problems prevent removal of libfam0: courier-base depends on libfam0. dpkg: error processing libfam0 (--remove): dependency problems - not removing Errors were encountered while processing: libfam0 1m29.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libfam0'] 1m29.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'perl'] 1m29.4s DUMP: dpkg: dependency problems prevent removal of perl: courier-base depends on perl. courier-filter-perl depends on perl (>= 5.8). liberror-perl depends on perl (>= 5.6.0-16). perl-modules depends on perl (>= 5.10.1-1). dpkg: error processing perl (--remove): dependency problems - not removing Errors were encountered while processing: perl 1m29.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'perl'] 1m29.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'perl-modules'] 1m29.4s DUMP: dpkg: dependency problems prevent removal of perl-modules: perl depends on perl-modules (>= 5.10.1-16). dpkg: error processing perl-modules (--remove): dependency problems - not removing Errors were encountered while processing: perl-modules 1m29.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'perl-modules'] 1m29.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libdb4.7'] 1m29.4s DUMP: dpkg: dependency problems prevent removal of libdb4.7: perl depends on libdb4.7. dpkg: error processing libdb4.7 (--remove): dependency problems - not removing Errors were encountered while processing: libdb4.7 1m29.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libdb4.7'] 1m29.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'expect'] 1m29.4s DUMP: dpkg: dependency problems prevent removal of expect: courier-authlib depends on expect. dpkg: error processing expect (--remove): dependency problems - not removing Errors were encountered while processing: expect 1m29.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'expect'] 1m29.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libgdbm3'] 1m29.5s DUMP: dpkg: dependency problems prevent removal of libgdbm3: courier-base depends on libgdbm3 (>= 1.8.3). courier-mta depends on libgdbm3 (>= 1.8.3). courier-authlib depends on libgdbm3 (>= 1.8.3). perl depends on libgdbm3 (>= 1.8.3). courier-authlib-userdb depends on libgdbm3 (>= 1.8.3). dpkg: error processing libgdbm3 (--remove): dependency problems - not removing Errors were encountered while processing: libgdbm3 1m29.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libgdbm3'] 1m29.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libltdl3'] 1m29.9s DUMP: (Reading database ... 8367 files and directories currently installed.) Removing libltdl3 ... 1m29.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'libltdl3'] 1m29.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authlib'] 1m29.9s DUMP: dpkg: dependency problems prevent removal of courier-authlib: courier-base depends on courier-authlib (>= 0.63.0). courier-mta depends on courier-authlib (>= 0.63.0). courier-authlib-userdb depends on courier-authlib (>= 0.63.0). courier-authdaemon depends on courier-authlib (>= 0.63.0). dpkg: error processing courier-authlib (--remove): dependency problems - not removing Errors were encountered while processing: courier-authlib 1m29.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-authlib'] 1m29.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'tcl8.5'] 1m29.9s DUMP: dpkg: dependency problems prevent removal of tcl8.5: expect depends on tcl8.5 (>= 8.5.0). dpkg: error processing tcl8.5 (--remove): dependency problems - not removing Errors were encountered while processing: tcl8.5 1m29.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'tcl8.5'] 1m29.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'tcl8.4'] 1m30.0s DUMP: (Reading database ... 8357 files and directories currently installed.) Removing tcl8.4 ... update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode. 1m30.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'tcl8.4'] 1m30.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-filter-perl'] 1m30.0s DUMP: (Reading database ... 8237 files and directories currently installed.) Removing courier-filter-perl ... Stopping courier-filter-perl mail filter ... 1m30.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', 'courier-filter-perl'] 1m30.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m31.0s DUMP: (Reading database ... 8172 files and directories currently installed.) Removing liberror-perl ... Removing courier-mta ... invoke-rc.d: policy-rc.d denied execution of stop. Removing 'diversion of /usr/bin/addcr to /usr/bin/addcr.ucspi-tcp by courier-mta' No diversion 'diversion of /usr/share/man/man1/addcr.1.gz to /usr/share/man/man1/addcr.ucspi-tcp.1.gz by courier-mta', none removed. Removing courier-base ... Removing libperl5.10 ... Removing courier-authdaemon ... invoke-rc.d: policy-rc.d denied execution of stop. Removing courier-authlib-userdb ... Removing libfam0 ... Removing courier-authlib ... Removing expect ... Removing libltdl7 ... Removing tcl8.5 ... Removing perl ... Removing libgdbm3 ... Removing perl-modules ... Removing libdb4.7 ... 1m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m31.0s INFO: Running scripts post_remove 1m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libltdl7'] 1m31.0s DUMP: (Reading database ... 6310 files and directories currently installed.) Removing libltdl7 ... Purging configuration files for libltdl7 ... 1m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libltdl7'] 1m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-base'] 1m31.2s DUMP: (Reading database ... 6310 files and directories currently installed.) Removing courier-base ... Purging configuration files for courier-base ... 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-base'] 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authlib-userdb'] 1m31.2s DUMP: dpkg: warning: ignoring request to remove courier-authlib-userdb which isn't installed. 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authlib-userdb'] 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'liberror-perl'] 1m31.2s DUMP: dpkg: warning: ignoring request to remove liberror-perl which isn't installed. 1m31.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'liberror-perl'] 1m31.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authdaemon'] 1m31.3s DUMP: (Reading database ... 6308 files and directories currently installed.) Removing courier-authdaemon ... Purging configuration files for courier-authdaemon ... 1m31.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authdaemon'] 1m31.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libperl5.10'] 1m31.3s DUMP: dpkg: warning: ignoring request to remove libperl5.10 which isn't installed. 1m31.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libperl5.10'] 1m31.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-mta'] 1m31.5s DUMP: (Reading database ... 6306 files and directories currently installed.) Removing courier-mta ... Purging configuration files for courier-mta ... dpkg: warning: while removing courier-mta, directory '/etc/courier/filters' not empty so not removed. dpkg: warning: while removing courier-mta, directory '/etc/courier' not empty so not removed. 1m31.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-mta'] 1m31.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libfam0'] 1m31.6s DUMP: (Reading database ... 6275 files and directories currently installed.) Removing libfam0 ... Purging configuration files for libfam0 ... 1m31.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libfam0'] 1m31.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'perl'] 1m31.6s DUMP: dpkg: warning: ignoring request to remove perl which isn't installed. 1m31.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'perl'] 1m31.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'perl-modules'] 1m31.7s DUMP: (Reading database ... 6275 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... 1m31.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'perl-modules'] 1m31.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libdb4.7'] 1m31.7s DUMP: dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. 1m31.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libdb4.7'] 1m31.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'expect'] 1m31.7s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing expect ... Purging configuration files for expect ... 1m31.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'expect'] 1m31.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libgdbm3'] 1m31.8s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing libgdbm3 ... Purging configuration files for libgdbm3 ... 1m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libgdbm3'] 1m31.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libltdl3'] 1m31.8s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing libltdl3 ... Purging configuration files for libltdl3 ... 1m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'libltdl3'] 1m31.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authlib'] 1m31.8s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing courier-authlib ... Purging configuration files for courier-authlib ... 1m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-authlib'] 1m31.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'tcl8.5'] 1m31.9s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing tcl8.5 ... Purging configuration files for tcl8.5 ... 1m31.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'tcl8.5'] 1m31.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'tcl8.4'] 1m31.9s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing tcl8.4 ... Purging configuration files for tcl8.4 ... 1m31.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'tcl8.4'] 1m31.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m31.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m31.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-filter-perl'] 1m32.0s DUMP: (Reading database ... 6272 files and directories currently installed.) Removing courier-filter-perl ... Purging configuration files for courier-filter-perl ... 1m32.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', 'courier-filter-perl'] 1m32.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m32.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m32.0s INFO: Running scripts post_purge 1m32.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/post_purge_exceptions'] 1m32.0s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 1m32.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'tmp/scripts/post_purge_exceptions'] 1m32.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', '--pending'] 1m32.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--purge', '--pending'] 1m32.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m32.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'dpkg', '--remove', '--pending'] 1m33.2s INFO: Warning: Package purging left files on system: /etc/courier owned by: courier-base, courier-authdaemon, courier-mta /etc/courier/filters owned by: courier-mta 1m33.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m33.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF5B-CL'] 1m33.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'umount', '/proc'] 1m33.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF5B-CL', 'umount', '/proc'] 1m33.9s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpF5B-CL 1m33.9s INFO: PASS: Upgrading between Debian distributions. 1m33.9s INFO: PASS: All tests. 1m33.9s INFO: piuparts run ends. End: 2011-01-07 20:51:33 UTC