Start: 2013-04-22 19:44:42 UTC [lenny] Package: ettercap Priority: optional Section: net Installed-Size: 444 Maintainer: Murat Demirten Architecture: amd64 Version: 1:0.7.3-1.2 Replaces: ettercap-gtk Depends: libc6 (>= 2.3.5-1), libltdl3 (>= 1.5.2-2), libncurses5 (>= 5.4-5), libnet1 (>= 1.1.2-1), libpcap0.8 (>= 0.9.3-1), libpcre3 (>= 4.5), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), ettercap-common (= 1:0.7.3-1.2) Conflicts: ettercap-gtk Filename: pool/main/e/ettercap/ettercap_0.7.3-1.2_amd64.deb Size: 204660 MD5sum: c62ef67ad42691ee65fd82609dc42e24 SHA1: 407724f61e4be25792f48ff7a4cdc19db0ebb44d SHA256: 44d68010a79e6dc0a7c040c3eae2d3c29b2744b832e1df6521232cb48679ec10 Description: Multipurpose sniffer/interceptor/logger for switched LAN Ettercap supports active and passive dissection of many protocols (even ciphered ones) and includes many feature for network and host analysis. . Data injection in an established connection and filtering (substitute or drop a packet) on the fly is also possible, keeping the connection synchronized. . Many sniffing modes were implemented to give you a powerful and complete sniffing suite. It's possible to sniff in four modes: IP Based, MAC Based, ARP Based (full-duplex) and PublicARP Based (half-duplex). . It has the ability to check whether you are in a switched LAN or not, and to use OS fingerprints (active or passive) to let you know the geometry of the LAN. Tag: interface::text-mode, network::scanner, role::program, scope::utility, uitoolkit::ncurses, use::scanning [squeeze] Package: ettercap Priority: optional Section: net Installed-Size: 448 Maintainer: Murat Demirten Architecture: amd64 Version: 1:0.7.3-2.1+squeeze1 Replaces: ettercap-gtk Depends: libc6 (>= 2.7), libltdl7 (>= 2.2.6b), libncurses5 (>= 5.7+20100313), libnet1 (>= 1.1.2.1), libpcap0.8 (>= 0.9.8), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8m-1), zlib1g (>= 1:1.1.4), ettercap-common (= 1:0.7.3-2.1+squeeze1) Conflicts: ettercap-gtk Filename: pool/main/e/ettercap/ettercap_0.7.3-2.1+squeeze1_amd64.deb Size: 207112 MD5sum: ce100094287a8967efb23ac6b76753f2 SHA1: 394384388054c90ed0e8304ad15513d7a4d7459f SHA256: 7009c0295cdf0e92b1c6293ec6d1497dd8cb1e39ad044d87e8a0e728836fe253 Description: Multipurpose sniffer/interceptor/logger for switched LAN Ettercap supports active and passive dissection of many protocols (even ciphered ones) and includes many feature for network and host analysis. . Data injection in an established connection and filtering (substitute or drop a packet) on the fly is also possible, keeping the connection synchronized. . Many sniffing modes were implemented to give you a powerful and complete sniffing suite. It's possible to sniff in four modes: IP Based, MAC Based, ARP Based (full-duplex) and PublicARP Based (half-duplex). . It has the ability to check whether you are in a switched LAN or not, and to use OS fingerprints (active or passive) to let you know the geometry of the LAN. Tag: interface::text-mode, network::scanner, role::program, scope::utility, uitoolkit::ncurses, use::scanning Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-debsums-errors --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt ettercap=1:0.7.3-2.1+squeeze1 Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201304071036~0.50-24-gfd6cabe starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-debsums-errors' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'ettercap=1:0.7.3-2.1+squeeze1' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmprWmMeG 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmprWmMeG 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmprWmMeG', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m3.8s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmprWmMeG', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'mount', '-t', 'proc', 'proc', '/proc'] 0m3.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'mount', '-t', 'proc', 'proc', '/proc'] 0m3.9s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m3.9s DEBUG: Created policy-rc.d and chmodded it. 0m3.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'update'] 0m4.4s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m4.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'update'] 0m4.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', '-yf', 'dist-upgrade'] 0m4.7s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m4.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', '-yf', 'dist-upgrade'] 0m4.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmprWmMeG/tmp/scripts/ 0m4.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmprWmMeG/tmp/scripts/ 0m4.7s INFO: Running scripts post_setup 0m4.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_experimental'] 0m4.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_experimental'] 0m4.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_forbid_home'] 0m4.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_forbid_home'] 0m4.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m28.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (532kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m28.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m28.7s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmprWmMeG to squeeze 0m28.7s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m28.7s INFO: Running scripts pre_distupgrade 0m28.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/pre_distupgrade_exceptions'] 0m28.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/pre_distupgrade_exceptions'] 0m28.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m28.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m28.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'update'] 0m37.5s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (9956kB/s) Reading package lists... 0m37.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'update'] 0m37.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', '-yf', 'dist-upgrade'] 1m18.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (47.6MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Apr 22 19:45:46 UTC 2013. Universal Time is now: Mon Apr 22 19:45:46 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130422T1945.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m18.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', '-yf', 'dist-upgrade'] 1m18.3s INFO: Running scripts post_distupgrade 1m18.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_exceptions'] 1m18.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_exceptions'] 1m18.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_experimental'] 1m18.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_experimental'] 1m18.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m18.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m18.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m18.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m18.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m18.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m18.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m18.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m18.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'clean'] 1m18.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'apt-get', 'clean'] 1m19.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'dpkg', '--get-selections', '*'] 1m19.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m19.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'dpkg', '--get-selections', '*'] 1m19.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'dpkg-divert', '--list'] 1m19.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m19.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'dpkg-divert', '--list'] 1m19.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'umount', '/proc'] 1m19.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmprWmMeG', 'umount', '/proc'] 1m19.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m20.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmprWmMeG'] 1m20.0s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmprWmMeG 1m20.0s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m20.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpeDc52R 1m20.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpeDc52R 1m20.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpeDc52R', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m50.3s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpeDc52R', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m50.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'mount', '-t', 'proc', 'proc', '/proc'] 1m50.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'mount', '-t', 'proc', 'proc', '/proc'] 1m50.3s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 1m50.3s DEBUG: Created policy-rc.d and chmodded it. 1m50.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'update'] 1m50.7s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 1m50.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'update'] 1m50.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-yf', 'dist-upgrade'] 1m51.0s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m51.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-yf', 'dist-upgrade'] 1m51.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpeDc52R/tmp/scripts/ 1m51.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpeDc52R/tmp/scripts/ 1m51.1s INFO: Running scripts post_setup 1m51.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_experimental'] 1m51.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_experimental'] 1m51.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_forbid_home'] 1m51.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_forbid_home'] 1m51.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m52.4s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (590kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m52.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m52.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 1m52.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 1m52.7s INFO: Running scripts pre_test 1m52.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_test_root_password'] 1m52.7s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m52.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_test_root_password'] 1m52.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'show', 'ettercap'] 1m52.8s DUMP: Package: ettercap Priority: optional Section: net Installed-Size: 444 Maintainer: Murat Demirten Architecture: amd64 Version: 1:0.7.3-1.2 Replaces: ettercap-gtk Depends: libc6 (>= 2.3.5-1), libltdl3 (>= 1.5.2-2), libncurses5 (>= 5.4-5), libnet1 (>= 1.1.2-1), libpcap0.8 (>= 0.9.3-1), libpcre3 (>= 4.5), libssl0.9.8 (>= 0.9.8c-1), zlib1g (>= 1:1.2.1), ettercap-common (= 1:0.7.3-1.2) Conflicts: ettercap-gtk Filename: pool/main/e/ettercap/ettercap_0.7.3-1.2_amd64.deb Size: 204660 MD5sum: c62ef67ad42691ee65fd82609dc42e24 SHA1: 407724f61e4be25792f48ff7a4cdc19db0ebb44d SHA256: 44d68010a79e6dc0a7c040c3eae2d3c29b2744b832e1df6521232cb48679ec10 Description: Multipurpose sniffer/interceptor/logger for switched LAN Ettercap supports active and passive dissection of many protocols (even ciphered ones) and includes many feature for network and host analysis. . Data injection in an established connection and filtering (substitute or drop a packet) on the fly is also possible, keeping the connection synchronized. . Many sniffing modes were implemented to give you a powerful and complete sniffing suite. It's possible to sniff in four modes: IP Based, MAC Based, ARP Based (full-duplex) and PublicARP Based (half-duplex). . It has the ability to check whether you are in a switched LAN or not, and to use OS fingerprints (active or passive) to let you know the geometry of the LAN. Tag: interface::text-mode, network::scanner, role::program, scope::utility, uitoolkit::ncurses, use::scanning 1m52.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'show', 'ettercap'] 1m52.8s INFO: apt-cache knows about the following packages: ettercap 1m52.8s INFO: Running scripts pre_install 1m52.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 1m53.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 1m53.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m53.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m53.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 1m53.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m53.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 1m53.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 1m53.1s DUMP: ettercap: Installed: (none) Candidate: 1:0.7.3-1.2 Version table: 1:0.7.3-1.2 0 500 http://archive.debian.org lenny/main Packages 1m53.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 1m53.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap'] 1m55.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: ettercap-common libltdl3 libnet1 libpcap0.8 libpcre3 libssl0.9.8 The following NEW packages will be installed: ettercap ettercap-common libltdl3 libnet1 libpcap0.8 libpcre3 libssl0.9.8 0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. Need to get 2043kB of archives. After this operation, 5206kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny16 [981kB] Get:2 http://archive.debian.org lenny/main libpcre3 7.6-2.1 [213kB] Get:3 http://archive.debian.org lenny/main libltdl3 1.5.26-4+lenny1 [180kB] Get:4 http://archive.debian.org lenny/main libnet1 1.1.2.1-2 [53.3kB] Get:5 http://archive.debian.org lenny/main libpcap0.8 0.9.8-5 [100kB] Get:6 http://archive.debian.org lenny/main ettercap-common 1:0.7.3-1.2 [312kB] Get:7 http://archive.debian.org lenny/main ettercap 1:0.7.3-1.2 [205kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2043kB in 0s (2551kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libssl0.9.8. (Reading database ... 6013 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny16_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.6-2.1_amd64.deb) ... Selecting previously deselected package libltdl3. Unpacking libltdl3 (from .../libltdl3_1.5.26-4+lenny1_amd64.deb) ... Selecting previously deselected package libnet1. Unpacking libnet1 (from .../libnet1_1.1.2.1-2_amd64.deb) ... Selecting previously deselected package libpcap0.8. Unpacking libpcap0.8 (from .../libpcap0.8_0.9.8-5_amd64.deb) ... Selecting previously deselected package ettercap-common. Unpacking ettercap-common (from .../ettercap-common_1%3a0.7.3-1.2_amd64.deb) ... Selecting previously deselected package ettercap. Unpacking ettercap (from .../ettercap_1%3a0.7.3-1.2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libssl0.9.8 (0.9.8g-15+lenny16) ... Setting up libpcre3 (7.6-2.1) ... Setting up libltdl3 (1.5.26-4+lenny1) ... Setting up libnet1 (1.1.2.1-2) ... Setting up libpcap0.8 (0.9.8-5) ... Setting up ettercap-common (1:0.7.3-1.2) ... Setting up ettercap (1:0.7.3-1.2) ... 1m55.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap'] 1m55.0s INFO: Running scripts post_install 1m55.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 1m55.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 1m55.3s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpeDc52R to squeeze 1m55.3s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 1m55.3s INFO: Running scripts pre_distupgrade 1m55.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_distupgrade_exceptions'] 1m55.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_distupgrade_exceptions'] 1m55.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m55.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m55.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'update'] 2m3.2s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.2MB/s) Reading package lists... 2m3.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'update'] 2m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-yf', 'dist-upgrade'] 2m45.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 libltdl7 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs ettercap ettercap-common findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libnet1 libpam-modules libpam-runtime libpam0g libpcap0.8 libpcre3 libreadline5 libselinux1 libsepol1 libslang2 libss2 libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 75 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 36.9MB of archives. After this operation, 13.4MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze14 [1002kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:78 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:79 http://piatti.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:80 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:81 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:82 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:83 http://piatti.debian.org squeeze/main libltdl7 2.2.6b-2 [296kB] Get:84 http://piatti.debian.org squeeze/main libnet1 1.1.4-2 [61.0kB] Get:85 http://piatti.debian.org squeeze/main libpcap0.8 1.1.1-2+squeeze1 [131kB] Get:86 http://piatti.debian.org squeeze/main ettercap 1:0.7.3-2.1+squeeze1 [207kB] Get:87 http://piatti.debian.org squeeze/main ettercap-common 1:0.7.3-2.1+squeeze1 [316kB] Get:88 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:89 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 36.9MB in 1s (32.7MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6180 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6182 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6183 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6191 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6191 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6201 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6243 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6249 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6256 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6252 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6264 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6264 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6313 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6335 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6335 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6383 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6383 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6384 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6384 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6384 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6401 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6405 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6405 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6405 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6409 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6415 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6412 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6412 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6413 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6416 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6418 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6418 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Apr 22 19:47:07 UTC 2013. Universal Time is now: Mon Apr 22 19:47:07 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6424 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6428 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6429 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6432 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6461 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130422T1947.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6462 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6480 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6483 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6485 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6487 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6487 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6493 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6490 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6490 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6488 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6488 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6488 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6489 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6440 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6440 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6440 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6440 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6453 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6453 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6453 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6454 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6462 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6462 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6506 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6506 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6506 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6507 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6507 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6524 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6524 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6523 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny16 (using .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libpcre3 7.6-2.1 (using .../libpcre3_8.02-1.1_amd64.deb) ... Unpacking replacement libpcre3 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Selecting previously deselected package libltdl7. Unpacking libltdl7 (from .../libltdl7_2.2.6b-2_amd64.deb) ... Preparing to replace libnet1 1.1.2.1-2 (using .../libnet1_1.1.4-2_amd64.deb) ... Unpacking replacement libnet1 ... Preparing to replace libpcap0.8 0.9.8-5 (using .../libpcap0.8_1.1.1-2+squeeze1_amd64.deb) ... Unpacking replacement libpcap0.8 ... Preparing to replace ettercap 1:0.7.3-1.2 (using .../ettercap_1%3a0.7.3-2.1+squeeze1_amd64.deb) ... Unpacking replacement ettercap ... Preparing to replace ettercap-common 1:0.7.3-1.2 (using .../ettercap-common_1%3a0.7.3-2.1+squeeze1_amd64.deb) ... Unpacking replacement ettercap-common ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libpcre3 (8.02-1.1) ... Setting up ucf (3.0025+nmu1) ... Setting up libltdl7 (2.2.6b-2) ... Setting up libnet1 (1.1.4-2) ... Setting up libpcap0.8 (1.1.1-2+squeeze1) ... Setting up ettercap-common (1:0.7.3-2.1+squeeze1) ... Setting up ettercap (1:0.7.3-2.1+squeeze1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 2m45.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-yf', 'dist-upgrade'] 2m45.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'show', 'ettercap'] 2m50.8s DUMP: Package: ettercap Priority: optional Section: net Installed-Size: 448 Maintainer: Murat Demirten Architecture: amd64 Version: 1:0.7.3-2.1+squeeze1 Replaces: ettercap-gtk Depends: libc6 (>= 2.7), libltdl7 (>= 2.2.6b), libncurses5 (>= 5.7+20100313), libnet1 (>= 1.1.2.1), libpcap0.8 (>= 0.9.8), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8m-1), zlib1g (>= 1:1.1.4), ettercap-common (= 1:0.7.3-2.1+squeeze1) Conflicts: ettercap-gtk Filename: pool/main/e/ettercap/ettercap_0.7.3-2.1+squeeze1_amd64.deb Size: 207112 MD5sum: ce100094287a8967efb23ac6b76753f2 SHA1: 394384388054c90ed0e8304ad15513d7a4d7459f SHA256: 7009c0295cdf0e92b1c6293ec6d1497dd8cb1e39ad044d87e8a0e728836fe253 Description: Multipurpose sniffer/interceptor/logger for switched LAN Ettercap supports active and passive dissection of many protocols (even ciphered ones) and includes many feature for network and host analysis. . Data injection in an established connection and filtering (substitute or drop a packet) on the fly is also possible, keeping the connection synchronized. . Many sniffing modes were implemented to give you a powerful and complete sniffing suite. It's possible to sniff in four modes: IP Based, MAC Based, ARP Based (full-duplex) and PublicARP Based (half-duplex). . It has the ability to check whether you are in a switched LAN or not, and to use OS fingerprints (active or passive) to let you know the geometry of the LAN. Tag: interface::text-mode, network::scanner, role::program, scope::utility, uitoolkit::ncurses, use::scanning 2m50.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'show', 'ettercap'] 2m50.8s INFO: apt-cache knows about the following packages: ettercap 2m50.8s INFO: Running scripts pre_install 2m50.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 2m50.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 2m50.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m50.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m50.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 2m50.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=main origin piatti.debian.org Pinned packages: 2m50.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 2m50.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 2m50.8s DUMP: ettercap: Installed: 1:0.7.3-2.1+squeeze1 Candidate: 1:0.7.3-2.1+squeeze1 Version table: *** 1:0.7.3-2.1+squeeze1 0 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 2m50.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 2m50.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap'] 2m51.2s DUMP: Reading package lists... Building dependency tree... Reading state information... ettercap is already the newest version. The following package was automatically installed and is no longer required: libltdl3 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2m51.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap'] 2m51.2s INFO: Running scripts post_install 2m51.2s INFO: Running scripts post_distupgrade 2m51.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_exceptions'] 2m51.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_exceptions'] 2m51.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_experimental'] 2m51.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_experimental'] 2m51.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m51.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m51.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m51.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m51.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m51.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m51.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m51.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m51.8s INFO: Running scripts pre_install 2m51.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 2m51.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_exceptions'] 2m51.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m51.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_install_foreign_architecture_i386'] 2m51.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 2m51.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://piatti.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=non-free origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=contrib origin piatti.debian.org 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.7,o=Debian,a=stable,n=squeeze,l=Debian,c=main origin piatti.debian.org Pinned packages: 2m51.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy'] 2m51.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 2m51.8s DUMP: ettercap: Installed: 1:0.7.3-2.1+squeeze1 Candidate: 1:0.7.3-2.1+squeeze1 Version table: *** 1:0.7.3-2.1+squeeze1 0 500 http://piatti.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 2m51.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-cache', 'policy', 'ettercap'] 2m51.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap=1:0.7.3-2.1+squeeze1'] 2m52.2s DUMP: Reading package lists... Building dependency tree... Reading state information... ettercap is already the newest version. The following package was automatically installed and is no longer required: libltdl3 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2m52.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', '-y', 'install', 'ettercap=1:0.7.3-2.1+squeeze1'] 2m52.2s INFO: Running scripts post_install 2m52.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m52.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m52.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--get-selections', '*'] 2m52.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install ettercap install ettercap-common install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install libltdl3 install libltdl7 install liblzma2 install libncurses5 install libncursesw5 install libnet1 install libpam-modules install libpam-runtime install libpam0g install libpcap0.8 install libpcre3 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 2m52.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--get-selections', '*'] 2m53.3s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpeDc52R', '-ac'] 2m53.9s DUMP: debsums: no md5sums for mawk 2m53.9s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpeDc52R', '-ac'] 2m53.9s INFO: Running scripts pre_remove 2m53.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_exceptions'] 2m54.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/pre_remove_exceptions'] 2m54.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'remove', 'libltdl7', 'ettercap-common', 'libltdl3', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'libnet1', 'ettercap'] 2m54.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: ettercap ettercap-common libltdl3 libltdl7 libnet1 libpcap0.8 libpcre3 libssl0.9.8 0 upgraded, 0 newly installed, 8 to remove and 0 not upgraded. After this operation, 5755 kB disk space will be freed. (Reading database ... 6607 files and directories currently installed.) Removing ettercap ... Removing ettercap-common ... Removing libltdl3 ... Removing libltdl7 ... Removing libnet1 ... Removing libpcap0.8 ... Removing libpcre3 ... Removing libssl0.9.8 ... 2m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'remove', 'libltdl7', 'ettercap-common', 'libltdl3', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'libnet1', 'ettercap'] 2m54.9s INFO: Running scripts post_remove 2m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_remove_exceptions'] 2m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_remove_exceptions'] 2m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', 'libltdl7', 'ettercap-common', 'libltdl3', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'libnet1'] 2m55.2s DUMP: (Reading database ... 6419 files and directories currently installed.) Removing libltdl7 ... Purging configuration files for libltdl7 ... Removing ettercap-common ... Purging configuration files for ettercap-common ... Removing libltdl3 ... Purging configuration files for libltdl3 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libpcap0.8 ... Purging configuration files for libpcap0.8 ... Removing libnet1 ... Purging configuration files for libnet1 ... 2m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', 'libltdl7', 'ettercap-common', 'libltdl3', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'libnet1'] 2m55.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', 'ettercap'] 2m55.2s DUMP: dpkg: warning: ignoring request to remove ettercap which isn't installed. 2m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', 'ettercap'] 2m55.2s INFO: Running scripts post_purge 2m55.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_purge_exceptions'] 2m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'tmp/scripts/post_purge_exceptions'] 2m55.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', '--pending'] 2m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--purge', '--pending'] 2m55.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--remove', '--pending'] 2m55.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg', '--remove', '--pending'] 2m55.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m55.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m55.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg-divert', '--list'] 2m55.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 2m55.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'dpkg-divert', '--list'] 2m55.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'clean'] 2m55.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'apt-get', 'clean'] 2m56.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'umount', '/proc'] 2m56.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpeDc52R', 'umount', '/proc'] 2m56.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m57.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpeDc52R'] 2m57.0s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpeDc52R 2m57.0s INFO: PASS: Upgrading between Debian distributions. 2m57.0s INFO: PASS: All tests. 2m57.0s INFO: piuparts run ends. ret=0 End: 2013-04-22 19:47:39 UTC