Start: 2011-12-09 10:25:13 UTC Package: flowscan Priority: extra Section: net Installed-Size: 520 Maintainer: Guillaume Delacour Architecture: all Version: 1.006-13 Depends: perl (>= 5.6.1), rrdtool, librrds-perl, libboulder-perl, libnet-patricia-perl (>= 1.010), libconfigreader-perl, libcflow-perl (>= 1.024), libhtml-table-perl, flow-tools, debconf (>= 0.5) | debconf-2.0, ksh | mksh | pdksh | zsh Suggests: fprobe Filename: pool/main/f/flowscan/flowscan_1.006-13_all.deb Size: 141668 MD5sum: aeaaf548d58e3f94b098f549d2999a1f SHA1: f1b4c9d90a6c85628812d39c19e2cdb2881a3c21 SHA256: bd60116d94ff4f3e9b235809398231902d2378285c7ab128c08558493902e2dd Description: flow-based IP traffic analysis and visualization tool FlowScan is a freely-available network traffic analysis and visualization tool which uses IP flow data to provide a continuous near real-time view of a network's IP traffic. . FlowScan is a tool to monitor and graph flow information from Cisco and Riverstone routers in near real-time. You can also use FlowScan with flow information generated by programs like fprobe. . Homepage: http://net.doit.wisc.edu/~plonka/FlowScan/ Tag: admin::accounting, implemented-in::perl, implemented-in::shell, network::configuration, protocol::ip, role::program, scope::utility, use::viewing Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --dpkg-noforce-unsafe-io --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ flowscan Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.42~201112090944~0.41-188-g3892707 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --dpkg-noforce-unsafe-io --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ flowscan 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Thu Nov 3 03:41:26 UTC 2011 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmptX_t4k 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmptX_t4k 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmptX_t4k', '-zxf', 'lenny.tar.gz'] 0m5.9s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmptX_t4k', '-zxf', 'lenny.tar.gz'] 0m5.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'mount', '-t', 'proc', 'proc', '/proc'] 0m5.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'mount', '-t', 'proc', 'proc', '/proc'] 0m5.9s DEBUG: Created policy-rc.d and chmodded it. 0m5.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'update'] 0m5.9s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m5.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'update'] 0m5.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', '-yf', 'upgrade'] 0m6.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m6.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', '-yf', 'upgrade'] 0m6.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmptX_t4k/tmp/scripts/ 0m6.3s INFO: Running scripts post_setup 0m6.3s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmptX_t4k to squeeze 0m6.3s INFO: Running scripts pre_distupgrade 0m6.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'update'] 0m9.4s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [87.3kB] Get:3 http://piatti.debian.org squeeze/main Packages [8603kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8880kB in 0s (10.0MB/s) Reading package lists... 0m9.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'update'] 0m9.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', '-yf', 'dist-upgrade'] 0m31.8s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.3MB of archives. After this operation, 12.6MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze3 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-10 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-10 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.11 [2396kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze2 [1058kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2011k-0squeeze1 [630kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:75 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:76 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.3MB in 1s (24.9MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5915 files and directories currently installed.) Preparing to replace base-files 5lenny10 (using .../base-files_6.0squeeze3_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze3) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5917 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-10_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.2-10_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-10) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-10) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5918 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5926 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5926 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5936 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.11_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5984 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5991 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5987 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5999 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5999 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6022 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6048 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6070 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6070 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny3 (using .../perl-base_5.10.1-17squeeze2_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6118 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6118 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6136 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6140 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6144 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6147 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6147 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6148 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6153 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6153 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2011k-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2011k-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Dec 9 10:25:36 UTC 2011. Universal Time is now: Fri Dec 9 10:25:36 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6156 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6160 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6161 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6164 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6193 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20111209T1025.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6212 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6215 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6219 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6219 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6225 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6222 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6222 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6223 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6223 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6221 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6172 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6256 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6256 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6255 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m31.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', '-yf', 'dist-upgrade'] 0m31.8s INFO: apt-cache does not know about any of the requested packages 0m31.8s INFO: Running scripts post_distupgrade 0m31.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmptX_t4k'] 0m32.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmptX_t4k'] 0m32.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmptX_t4k'] 0m32.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmptX_t4k'] 0m32.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'clean'] 0m32.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'apt-get', 'clean'] 0m33.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'dpkg', '--get-selections', '*'] 0m33.1s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m33.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'dpkg', '--get-selections', '*'] 0m33.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'dpkg-divert', '--list'] 0m33.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m33.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'dpkg-divert', '--list'] 0m33.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'umount', '/proc'] 0m33.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmptX_t4k', 'umount', '/proc'] 0m33.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmptX_t4k 0m33.5s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m33.5s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpWOimX4 0m33.5s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpWOimX4 0m33.5s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpWOimX4', '-zxf', 'lenny.tar.gz'] 0m35.8s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpWOimX4', '-zxf', 'lenny.tar.gz'] 0m35.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'mount', '-t', 'proc', 'proc', '/proc'] 0m35.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'mount', '-t', 'proc', 'proc', '/proc'] 0m35.8s DEBUG: Created policy-rc.d and chmodded it. 0m35.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'update'] 0m35.9s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m35.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'update'] 0m35.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-yf', 'upgrade'] 0m36.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m36.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-yf', 'upgrade'] 0m36.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmpWOimX4/tmp/scripts/ 0m36.2s INFO: Running scripts post_setup 0m36.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 0m36.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 0m36.5s INFO: Running scripts pre_test 0m36.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_test_root_password'] 0m36.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m36.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_test_root_password'] 0m36.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-cache', 'show', 'flowscan'] 0m36.5s DUMP: Package: flowscan Priority: extra Section: net Installed-Size: 508 Maintainer: Debian QA Group Architecture: all Version: 1.006-12 Depends: debconf (>= 0.5) | debconf-2.0, flow-tools, ksh | mksh | pdksh | zsh, libboulder-perl, libcflow-perl (>= 1.024), libconfigreader-perl, libhtml-table-perl, libnet-patricia-perl (>= 1.010), librrds-perl, perl (>= 5.6.1), rrdtool Suggests: fprobe Filename: pool/main/f/flowscan/flowscan_1.006-12_all.deb Size: 140384 MD5sum: 115a876ba06f0675e1f130e10baf22c5 SHA1: 074abb40219238de66a4085e148ca196123fe20d SHA256: 8243b6a4830f3f9be615bf7681d710d736352bedd2b195c6237772b0299f2d14 Description: flow-based IP traffic analysis and visualization tool FlowScan is a freely-available network traffic analysis and visualization tool which uses IP flow data to provide a continuous near real-time view of a network's IP traffic. . FlowScan is a tool to monitor and graph flow information from Cisco and Riverstone routers in near real-time. You can also use FlowScan with flow information generated by programs like fprobe. . Homepage http://net.doit.wisc.edu/~plonka/FlowScan/ Tag: admin::accounting, implemented-in::perl, implemented-in::shell, network::configuration, protocol::ip, role::program, scope::utility, use::viewing 0m36.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-cache', 'show', 'flowscan'] 0m36.6s INFO: apt-cache knows about the following packages: flowscan 0m36.6s INFO: Running scripts pre_install 0m36.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_install_exceptions'] 0m36.6s DUMP: Debug: running script tmp/scripts/pre_install_exceptions 0m36.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_install_exceptions'] 0m36.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-y', 'install', 'flowscan'] 1m5.0s DUMP: Reading package lists... Building dependency tree... The following extra packages will be installed: defoma file flow-tools fontconfig fontconfig-config ksh libboulder-perl libcairo2 libcflow-perl libconfigreader-perl libdatrie0 libdb4.5 libdirectfb-1.0-0 libexpat1 libfontconfig1 libfreetype6 libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 libhtml-parser-perl libhtml-table-perl libhtml-tagset-perl libhtml-tree-perl libkeyutils1 libkrb53 libldap-2.4-2 libmagic1 libmysqlclient15off libncursesw5 libnet-patricia-perl libnewt0.52 libpango1.0-0 libpango1.0-common libpcre3 libpixman-1-0 libpng12-0 libpopt0 libpq5 librrd4 librrds-perl libsasl2-2 libsqlite3-0 libssl0.9.8 libsysfs2 libtasn1-3 libthai-data libthai0 libts-0.0-0 liburi-perl libwrap0 libwww-perl libx11-6 libx11-data libxau6 libxcb-render-util0 libxcb-render0 libxcb-xlib0 libxcb1 libxdmcp6 libxft2 libxml-parser-perl libxml2 libxrender1 mime-support mysql-common netbase perl perl-modules python python-minimal python2.5 python2.5-minimal rrdtool ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail Suggested packages: defoma-doc dfontmgr psfontmgr x-ttcidfont-conf fprobe libfreetype6-dev rng-tools gnutls-bin krb5-doc krb5-user ttf-kochi-gothic ttf-kochi-mincho ttf-thryomanes ttf-baekmuk ttf-arphic-gbsn00lp ttf-arphic-bsmi00lp ttf-arphic-gkai00mp ttf-arphic-bkai00mp libio-socket-ssl-perl perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl python-doc python-tk python-profiler python2.5-doc binfmt-support Recommended packages: libft-perl libglib2.0-data libgpm2 libfribidi0 libsasl2-modules tcpd libmailtools-perl libhtml-format-perl libcompress-zlib-perl xml-core ifupdown The following NEW packages will be installed: defoma file flow-tools flowscan fontconfig fontconfig-config ksh libboulder-perl libcairo2 libcflow-perl libconfigreader-perl libdatrie0 libdb4.5 libdirectfb-1.0-0 libexpat1 libfontconfig1 libfreetype6 libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 libhtml-parser-perl libhtml-table-perl libhtml-tagset-perl libhtml-tree-perl libkeyutils1 libkrb53 libldap-2.4-2 libmagic1 libmysqlclient15off libncursesw5 libnet-patricia-perl libnewt0.52 libpango1.0-0 libpango1.0-common libpcre3 libpixman-1-0 libpng12-0 libpopt0 libpq5 librrd4 librrds-perl libsasl2-2 libsqlite3-0 libssl0.9.8 libsysfs2 libtasn1-3 libthai-data libthai0 libts-0.0-0 liburi-perl libwrap0 libwww-perl libx11-6 libx11-data libxau6 libxcb-render-util0 libxcb-render0 libxcb-xlib0 libxcb1 libxdmcp6 libxft2 libxml-parser-perl libxml2 libxrender1 mime-support mysql-common netbase perl perl-modules python python-minimal python2.5 python2.5-minimal rrdtool ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail 0 upgraded, 81 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8MB of archives. After this operation, 111MB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main libgpg-error0 1.4-2 [34.8kB] Get:2 http://piatti.debian.org lenny/main libgcrypt11 1.4.1-1 [245kB] Get:3 http://piatti.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:4 http://piatti.debian.org lenny/main libtasn1-3 1.4-1 [60.2kB] Get:5 http://piatti.debian.org lenny/main libgnutls26 2.4.2-6+lenny2 [507kB] Get:6 http://piatti.debian.org lenny/main libncursesw5 5.7+20081213-1 [375kB] Get:7 http://piatti.debian.org lenny/main libnewt0.52 0.52.2-11.3+lenny1 [72.1kB] Get:8 http://piatti.debian.org lenny/main libpopt0 1.14-4 [46.4kB] Get:9 http://piatti.debian.org lenny/main libsasl2-2 2.1.22.dfsg1-23+lenny1 [115kB] Get:10 http://piatti.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny13 [978kB] Get:11 http://piatti.debian.org lenny/main libwrap0 7.6.q-16 [31.9kB] Get:12 http://piatti.debian.org lenny/main netbase 4.34 [18.5kB] Get:13 http://piatti.debian.org lenny/main whiptail 0.52.2-11.3+lenny1 [35.8kB] Get:14 http://piatti.debian.org lenny/main libmagic1 4.26-1 [369kB] Get:15 http://piatti.debian.org lenny/main file 4.26-1 [44.5kB] Get:16 http://piatti.debian.org lenny/main libdb4.5 4.5.20-13 [555kB] Get:17 http://piatti.debian.org lenny/main libkeyutils1 1.2-9 [5984B] Get:18 http://piatti.debian.org lenny/main libkrb53 1.6.dfsg.4~beta1-5lenny6 [520kB] Get:19 http://piatti.debian.org lenny/main libldap-2.4-2 2.4.11-1+lenny2.1 [205kB] Get:20 http://piatti.debian.org lenny/main libpcre3 7.6-2.1 [213kB] Get:21 http://piatti.debian.org lenny/main libsqlite3-0 3.5.9-6 [253kB] Get:22 http://piatti.debian.org lenny/main libxml2 2.6.32.dfsg-5+lenny4 [861kB] Get:23 http://piatti.debian.org lenny/main mime-support 3.44-1 [33.3kB] Get:24 http://piatti.debian.org lenny/main perl-modules 5.10.0-19lenny3 [3191kB] Get:25 http://piatti.debian.org lenny/main perl 5.10.0-19lenny3 [5239kB] Get:26 http://piatti.debian.org lenny/main python2.5-minimal 2.5.2-15+lenny1 [1287kB] Get:27 http://piatti.debian.org lenny/main python2.5 2.5.2-15+lenny1 [3039kB] Get:28 http://piatti.debian.org lenny/main python-minimal 2.5.2-3 [13.5kB] Get:29 http://piatti.debian.org lenny/main python 2.5.2-3 [139kB] Get:30 http://piatti.debian.org lenny/main ucf 3.0016 [64.4kB] Get:31 http://piatti.debian.org lenny/main defoma 0.11.10-0.2 [101kB] Get:32 http://piatti.debian.org lenny/main mysql-common 5.0.51a-24+lenny5 [61.7kB] Get:33 http://piatti.debian.org lenny/main libmysqlclient15off 5.0.51a-24+lenny5 [1906kB] Get:34 http://piatti.debian.org lenny/main libpq5 8.3.14-0lenny1 [419kB] Get:35 http://piatti.debian.org lenny/main flow-tools 1:0.68-12 [1282kB] Get:36 http://piatti.debian.org lenny/main libexpat1 2.0.1-4+lenny3 [137kB] Get:37 http://piatti.debian.org lenny/main libfreetype6 2.3.7-2+lenny6 [384kB] Get:38 http://piatti.debian.org lenny/main ttf-dejavu-core 2.25-3 [1360kB] Get:39 http://piatti.debian.org lenny/main ttf-dejavu-extra 2.25-3 [2982kB] Get:40 http://piatti.debian.org lenny/main ttf-dejavu 2.25-3 [25.8kB] Get:41 http://piatti.debian.org lenny/main fontconfig-config 2.6.0-3 [64.7kB] Get:42 http://piatti.debian.org lenny/main libfontconfig1 2.6.0-3 [121kB] Get:43 http://piatti.debian.org lenny/main fontconfig 2.6.0-3 [164kB] Get:44 http://piatti.debian.org lenny/main ksh 93s+20080202-1 [1243kB] Get:45 http://piatti.debian.org lenny/main liburi-perl 1.35.dfsg.1-1 [88.0kB] Get:46 http://piatti.debian.org lenny/main libhtml-tagset-perl 3.20-2 [13.5kB] Get:47 http://piatti.debian.org lenny/main libhtml-parser-perl 3.56-1+lenny1 [112kB] Get:48 http://piatti.debian.org lenny/main libhtml-tree-perl 3.23-1 [209kB] Get:49 http://piatti.debian.org lenny/main libwww-perl 5.813-1+lenny2 [374kB] Get:50 http://piatti.debian.org lenny/main libxml-parser-perl 2.36-1.1+b1 [297kB] Get:51 http://piatti.debian.org lenny/main libboulder-perl 1.30-3 [168kB] Get:52 http://piatti.debian.org lenny/main libsysfs2 2.1.0-5 [28.9kB] Get:53 http://piatti.debian.org lenny/main libts-0.0-0 1.0-4 [28.4kB] Get:54 http://piatti.debian.org lenny/main libdirectfb-1.0-0 1.0.1-11 [1211kB] Get:55 http://piatti.debian.org lenny/main libpixman-1-0 0.10.0-2 [77.0kB] Get:56 http://piatti.debian.org lenny/main libpng12-0 1.2.27-2+lenny4 [168kB] Get:57 http://piatti.debian.org lenny/main libxau6 1:1.0.3-3 [12.5kB] Get:58 http://piatti.debian.org lenny/main libxdmcp6 1:1.0.2-3 [17.9kB] Get:59 http://piatti.debian.org lenny/main libxcb1 1.1-1.2 [47.5kB] Get:60 http://piatti.debian.org lenny/main libxcb-xlib0 1.1-1.2 [15.4kB] Get:61 http://piatti.debian.org lenny/main libx11-data 2:1.1.5-2 [169kB] Get:62 http://piatti.debian.org lenny/main libx11-6 2:1.1.5-2 [660kB] Get:63 http://piatti.debian.org lenny/main libxcb-render0 1.1-1.2 [21.8kB] Get:64 http://piatti.debian.org lenny/main libxcb-render-util0 0.2.1+git1-1 [9760B] Get:65 http://piatti.debian.org lenny/main libxrender1 1:0.9.4-2 [28.1kB] Get:66 http://piatti.debian.org lenny/main libcairo2 1.6.4-7 [559kB] Get:67 http://piatti.debian.org lenny/main libcflow-perl 1:0.68-12 [83.2kB] Get:68 http://piatti.debian.org lenny/main libconfigreader-perl 0.5-4 [23.7kB] Get:69 http://piatti.debian.org lenny/main libdatrie0 0.1.3-2 [19.8kB] Get:70 http://piatti.debian.org lenny/main libglib2.0-0 2.16.6-3 [828kB] Get:71 http://piatti.debian.org lenny/main libhtml-table-perl 2.04a-1.1 [26.5kB] Get:72 http://piatti.debian.org lenny/main libnet-patricia-perl 1.014-4+b1 [30.8kB] Get:73 http://piatti.debian.org lenny/main libpango1.0-common 1.20.5-6 [64.8kB] Get:74 http://piatti.debian.org lenny/main libthai-data 0.1.9-4+lenny1 [163kB] Get:75 http://piatti.debian.org lenny/main libthai0 0.1.9-4+lenny1 [32.9kB] Get:76 http://piatti.debian.org lenny/main libxft2 2.1.12-3 [52.1kB] Get:77 http://piatti.debian.org lenny/main libpango1.0-0 1.20.5-6 [312kB] Get:78 http://piatti.debian.org lenny/main librrd4 1.3.1-4 [246kB] Get:79 http://piatti.debian.org lenny/main librrds-perl 1.3.1-4 [78.8kB] Get:80 http://piatti.debian.org lenny/main rrdtool 1.3.1-4 [598kB] Get:81 http://piatti.debian.org lenny/main flowscan 1.006-12 [140kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.8MB in 6s (5126kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libgpg-error0. (Reading database ... 5915 files and directories currently installed.) Unpacking libgpg-error0 (from .../libgpg-error0_1.4-2_amd64.deb) ... Selecting previously deselected package libgcrypt11. Unpacking libgcrypt11 (from .../libgcrypt11_1.4.1-1_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ... Selecting previously deselected package libtasn1-3. Unpacking libtasn1-3 (from .../libtasn1-3_1.4-1_amd64.deb) ... Selecting previously deselected package libgnutls26. Unpacking libgnutls26 (from .../libgnutls26_2.4.2-6+lenny2_amd64.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20081213-1_amd64.deb) ... Selecting previously deselected package libnewt0.52. Unpacking libnewt0.52 (from .../libnewt0.52_0.52.2-11.3+lenny1_amd64.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.14-4_amd64.deb) ... Selecting previously deselected package libsasl2-2. Unpacking libsasl2-2 (from .../libsasl2-2_2.1.22.dfsg1-23+lenny1_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny13_amd64.deb) ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6.q-16_amd64.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../archives/netbase_4.34_all.deb) ... Selecting previously deselected package whiptail. Unpacking whiptail (from .../whiptail_0.52.2-11.3+lenny1_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_4.26-1_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_amd64.deb) ... Selecting previously deselected package libdb4.5. Unpacking libdb4.5 (from .../libdb4.5_4.5.20-13_amd64.deb) ... Selecting previously deselected package libkeyutils1. Unpacking libkeyutils1 (from .../libkeyutils1_1.2-9_amd64.deb) ... Selecting previously deselected package libkrb53. Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.4~beta1-5lenny6_amd64.deb) ... Selecting previously deselected package libldap-2.4-2. Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.11-1+lenny2.1_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.6-2.1_amd64.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.5.9-6_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5+lenny4_amd64.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.44-1_all.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny3_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-19lenny3_amd64.deb) ... Selecting previously deselected package python2.5-minimal. Unpacking python2.5-minimal (from .../python2.5-minimal_2.5.2-15+lenny1_amd64.deb) ... Selecting previously deselected package python2.5. Unpacking python2.5 (from .../python2.5_2.5.2-15+lenny1_amd64.deb) ... Selecting previously deselected package python-minimal. Unpacking python-minimal (from .../python-minimal_2.5.2-3_all.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.5.2-3_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Selecting previously deselected package defoma. Unpacking defoma (from .../defoma_0.11.10-0.2_all.deb) ... Selecting previously deselected package mysql-common. Unpacking mysql-common (from .../mysql-common_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package libmysqlclient15off. Unpacking libmysqlclient15off (from .../libmysqlclient15off_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package libpq5. Unpacking libpq5 (from .../libpq5_8.3.14-0lenny1_amd64.deb) ... Selecting previously deselected package flow-tools. Unpacking flow-tools (from .../flow-tools_1%3a0.68-12_amd64.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4+lenny3_amd64.deb) ... Selecting previously deselected package libfreetype6. Unpacking libfreetype6 (from .../libfreetype6_2.3.7-2+lenny6_amd64.deb) ... Selecting previously deselected package ttf-dejavu-core. Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.25-3_all.deb) ... Selecting previously deselected package ttf-dejavu-extra. Unpacking ttf-dejavu-extra (from .../ttf-dejavu-extra_2.25-3_all.deb) ... Selecting previously deselected package ttf-dejavu. Unpacking ttf-dejavu (from .../ttf-dejavu_2.25-3_all.deb) ... Selecting previously deselected package fontconfig-config. Unpacking fontconfig-config (from .../fontconfig-config_2.6.0-3_all.deb) ... Selecting previously deselected package libfontconfig1. Unpacking libfontconfig1 (from .../libfontconfig1_2.6.0-3_amd64.deb) ... Selecting previously deselected package fontconfig. Unpacking fontconfig (from .../fontconfig_2.6.0-3_amd64.deb) ... Selecting previously deselected package ksh. Unpacking ksh (from .../ksh_93s+20080202-1_amd64.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.35.dfsg.1-1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.56-1+lenny1_amd64.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.813-1+lenny2_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1+b1_amd64.deb) ... Selecting previously deselected package libboulder-perl. Unpacking libboulder-perl (from .../libboulder-perl_1.30-3_all.deb) ... Selecting previously deselected package libsysfs2. Unpacking libsysfs2 (from .../libsysfs2_2.1.0-5_amd64.deb) ... Selecting previously deselected package libts-0.0-0. Unpacking libts-0.0-0 (from .../libts-0.0-0_1.0-4_amd64.deb) ... Selecting previously deselected package libdirectfb-1.0-0. Unpacking libdirectfb-1.0-0 (from .../libdirectfb-1.0-0_1.0.1-11_amd64.deb) ... Selecting previously deselected package libpixman-1-0. Unpacking libpixman-1-0 (from .../libpixman-1-0_0.10.0-2_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.27-2+lenny4_amd64.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.3-3_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.1-1.2_amd64.deb) ... Selecting previously deselected package libxcb-xlib0. Unpacking libxcb-xlib0 (from .../libxcb-xlib0_1.1-1.2_amd64.deb) ... Selecting previously deselected package libx11-data. Unpacking libx11-data (from .../libx11-data_2%3a1.1.5-2_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.1.5-2_amd64.deb) ... Selecting previously deselected package libxcb-render0. Unpacking libxcb-render0 (from .../libxcb-render0_1.1-1.2_amd64.deb) ... Selecting previously deselected package libxcb-render-util0. Unpacking libxcb-render-util0 (from .../libxcb-render-util0_0.2.1+git1-1_amd64.deb) ... Selecting previously deselected package libxrender1. Unpacking libxrender1 (from .../libxrender1_1%3a0.9.4-2_amd64.deb) ... Selecting previously deselected package libcairo2. Unpacking libcairo2 (from .../libcairo2_1.6.4-7_amd64.deb) ... Selecting previously deselected package libcflow-perl. Unpacking libcflow-perl (from .../libcflow-perl_1%3a0.68-12_amd64.deb) ... Selecting previously deselected package libconfigreader-perl. Unpacking libconfigreader-perl (from .../libconfigreader-perl_0.5-4_all.deb) ... Selecting previously deselected package libdatrie0. Unpacking libdatrie0 (from .../libdatrie0_0.1.3-2_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.16.6-3_amd64.deb) ... Selecting previously deselected package libhtml-table-perl. Unpacking libhtml-table-perl (from .../libhtml-table-perl_2.04a-1.1_all.deb) ... Selecting previously deselected package libnet-patricia-perl. Unpacking libnet-patricia-perl (from .../libnet-patricia-perl_1.014-4+b1_amd64.deb) ... Selecting previously deselected package libpango1.0-common. Unpacking libpango1.0-common (from .../libpango1.0-common_1.20.5-6_all.deb) ... Selecting previously deselected package libthai-data. Unpacking libthai-data (from .../libthai-data_0.1.9-4+lenny1_all.deb) ... Selecting previously deselected package libthai0. Unpacking libthai0 (from .../libthai0_0.1.9-4+lenny1_amd64.deb) ... Selecting previously deselected package libxft2. Unpacking libxft2 (from .../libxft2_2.1.12-3_amd64.deb) ... Selecting previously deselected package libpango1.0-0. Unpacking libpango1.0-0 (from .../libpango1.0-0_1.20.5-6_amd64.deb) ... Selecting previously deselected package librrd4. Unpacking librrd4 (from .../librrd4_1.3.1-4_amd64.deb) ... Selecting previously deselected package librrds-perl. Unpacking librrds-perl (from .../librrds-perl_1.3.1-4_amd64.deb) ... Selecting previously deselected package rrdtool. Unpacking rrdtool (from .../rrdtool_1.3.1-4_amd64.deb) ... Selecting previously deselected package flowscan. Unpacking flowscan (from .../flowscan_1.006-12_all.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgpg-error0 (1.4-2) ... Setting up libgcrypt11 (1.4.1-1) ... Setting up libgdbm3 (1.8.3-3) ... Setting up libtasn1-3 (1.4-1) ... Setting up libgnutls26 (2.4.2-6+lenny2) ... Setting up libncursesw5 (5.7+20081213-1) ... Setting up libnewt0.52 (0.52.2-11.3+lenny1) ... Setting up libpopt0 (1.14-4) ... Setting up libsasl2-2 (2.1.22.dfsg1-23+lenny1) ... Setting up libssl0.9.8 (0.9.8g-15+lenny13) ... Setting up libwrap0 (7.6.q-16) ... Setting up netbase (4.34) ... Setting up whiptail (0.52.2-11.3+lenny1) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up libdb4.5 (4.5.20-13) ... Setting up libkeyutils1 (1.2-9) ... Setting up libkrb53 (1.6.dfsg.4~beta1-5lenny6) ... Setting up libldap-2.4-2 (2.4.11-1+lenny2.1) ... Setting up libpcre3 (7.6-2.1) ... Setting up libsqlite3-0 (3.5.9-6) ... Setting up libxml2 (2.6.32.dfsg-5+lenny4) ... Setting up mime-support (3.44-1) ... Setting up python2.5-minimal (2.5.2-15+lenny1) ... Setting up python2.5 (2.5.2-15+lenny1) ... Setting up python-minimal (2.5.2-3) ... Setting up python (2.5.2-3) ... Setting up ucf (3.0016) ... Setting up mysql-common (5.0.51a-24+lenny5) ... Setting up libmysqlclient15off (5.0.51a-24+lenny5) ... Setting up libpq5 (8.3.14-0lenny1) ... Setting up flow-tools (1:0.68-12) ... Setting up libexpat1 (2.0.1-4+lenny3) ... Setting up libfreetype6 (2.3.7-2+lenny6) ... Setting up ksh (93s+20080202-1) ... Setting up libsysfs2 (2.1.0-5) ... Setting up libts-0.0-0 (1.0-4) ... Setting up libdirectfb-1.0-0 (1.0.1-11) ... Setting up libpixman-1-0 (0.10.0-2) ... Setting up libpng12-0 (1.2.27-2+lenny4) ... Setting up libxau6 (1:1.0.3-3) ... Setting up libxdmcp6 (1:1.0.2-3) ... Setting up libxcb1 (1.1-1.2) ... Setting up libxcb-xlib0 (1.1-1.2) ... Setting up libx11-data (2:1.1.5-2) ... Setting up libx11-6 (2:1.1.5-2) ... Setting up libxcb-render0 (1.1-1.2) ... Setting up libxcb-render-util0 (0.2.1+git1-1) ... Setting up libxrender1 (1:0.9.4-2) ... Setting up libdatrie0 (0.1.3-2) ... Setting up libglib2.0-0 (2.16.6-3) ... Setting up libthai-data (0.1.9-4+lenny1) ... Setting up libthai0 (0.1.9-4+lenny1) ... Setting up perl-modules (5.10.0-19lenny3) ... Setting up perl (5.10.0-19lenny3) ... Setting up defoma (0.11.10-0.2) ... Setting up ttf-dejavu-core (2.25-3) ... Setting up ttf-dejavu-extra (2.25-3) ... Setting up ttf-dejavu (2.25-3) ... Setting up fontconfig-config (2.6.0-3) ... Setting up libfontconfig1 (2.6.0-3) ... Setting up fontconfig (2.6.0-3) ... Updating font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating category type1.. Updating category truetype.. Updating category cid.. Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Cleaning up old fontconfig caches... done. Regenerating fonts cache... done. Setting up liburi-perl (1.35.dfsg.1-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.56-1+lenny1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.813-1+lenny2) ... Setting up libxml-parser-perl (2.36-1.1+b1) ... Setting up libboulder-perl (1.30-3) ... Setting up libcairo2 (1.6.4-7) ... Setting up libcflow-perl (1:0.68-12) ... Setting up libconfigreader-perl (0.5-4) ... Setting up libhtml-table-perl (2.04a-1.1) ... Setting up libnet-patricia-perl (1.014-4+b1) ... Setting up libpango1.0-common (1.20.5-6) ... I: Purging /etc/pango/pango.modules Cleaning up font configuration of pango... Updating font configuration of pango... Cleaning up category xfont.. Updating category xfont.. *** You don't have any defomized font packages. *** So we are trying to force to generate pangox.aliases... Setting up libxft2 (2.1.12-3) ... Setting up libpango1.0-0 (1.20.5-6) ... Setting up librrd4 (1.3.1-4) ... Setting up librrds-perl (1.3.1-4) ... Setting up rrdtool (1.3.1-4) ... Setting up flowscan (1.006-12) ... 1m5.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-y', 'install', 'flowscan'] 1m5.0s INFO: Running scripts post_install 1m5.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 1m5.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 1m5.4s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpWOimX4 to squeeze 1m5.4s INFO: Running scripts pre_distupgrade 1m5.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'update'] 1m7.5s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [87.3kB] Get:3 http://piatti.debian.org squeeze/main Packages [8603kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8880kB in 0s (10.0MB/s) Reading package lists... 1m7.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'update'] 1m7.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-yf', 'dist-upgrade'] 2m9.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdatrie0 libxcb-xlib0 The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdatrie1 libdb4.7 libdb4.8 libdbi0 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 liblzma2 libmysqlclient16 libreadline6 libsocket6-perl libudev0 python2.6 python2.6-minimal sensible-utils tsconf xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils defoma diff dpkg e2fslibs e2fsprogs file findutils flow-tools flowscan fontconfig fontconfig-config gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcairo2 libcflow-perl libcomerr2 libdb4.6 libdevmapper1.02.1 libexpat1 libfontconfig1 libfreetype6 libgcc1 libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 libhtml-parser-perl libhtml-table-perl libhtml-tree-perl libkeyutils1 libkrb53 libldap-2.4-2 liblocale-gettext-perl libmagic1 libncurses5 libncursesw5 libnet-patricia-perl libnewt0.52 libpam-modules libpam-runtime libpam0g libpango1.0-0 libpango1.0-common libpcre3 libpixman-1-0 libpng12-0 libpopt0 libpq5 libreadline5 librrd4 librrds-perl libsasl2-2 libselinux1 libsepol1 libslang2 libsqlite3-0 libss2 libssl0.9.8 libstdc++6 libsysfs2 libtasn1-3 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libthai-data libthai0 libts-0.0-0 liburi-perl libusb-0.1-4 libuuid1 libwrap0 libwww-perl libx11-6 libx11-data libxau6 libxcb-render-util0 libxcb-render0 libxcb1 libxdmcp6 libxft2 libxml2 libxrender1 login lsb-base makedev mawk mime-support mktemp mount mysql-common ncurses-base ncurses-bin netbase passwd perl perl-base perl-modules procps python python-minimal python2.5 python2.5-minimal readline-common rrdtool sed sysv-rc sysvinit sysvinit-utils tar ttf-dejavu ttf-dejavu-core ttf-dejavu-extra tzdata ucf util-linux whiptail zlib1g 138 upgraded, 24 newly installed, 2 to remove and 0 not upgraded. Need to get 73.7MB of archives. After this operation, 37.1MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main perl-modules 5.10.1-17squeeze2 [3490kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-10 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-10 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB] Get:7 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:8 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:9 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:10 http://piatti.debian.org squeeze/main dpkg 1.15.8.11 [2396kB] Get:11 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:12 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:13 http://piatti.debian.org squeeze/main perl 5.10.1-17squeeze2 [4440kB] Get:14 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze2 [1058kB] Get:15 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:16 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:17 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:18 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:19 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:20 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:21 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:22 http://piatti.debian.org squeeze/main libnewt0.52 0.52.11-1 [71.8kB] Get:23 http://piatti.debian.org squeeze/main libpopt0 1.16-1 [54.1kB] Get:24 http://piatti.debian.org squeeze/main whiptail 0.52.11-1 [40.2kB] Get:25 http://piatti.debian.org squeeze/main file 5.04-5 [49.7kB] Get:26 http://piatti.debian.org squeeze/main libmagic1 5.04-5 [234kB] Get:27 http://piatti.debian.org squeeze/main defoma 0.11.11 [101kB] Get:28 http://piatti.debian.org squeeze/main libexpat1 2.0.1-7 [137kB] Get:29 http://piatti.debian.org squeeze/main libfreetype6 2.4.2-2.1+squeeze1 [376kB] Get:30 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:31 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:32 http://piatti.debian.org squeeze/main ttf-dejavu-core 2.31-1 [1451kB] Get:33 http://piatti.debian.org squeeze/main libfontconfig1 2.8.0-2.1 [281kB] Get:34 http://piatti.debian.org squeeze/main fontconfig-config 2.8.0-2.1 [217kB] Get:35 http://piatti.debian.org squeeze/main fontconfig 2.8.0-2.1 [334kB] Get:36 http://piatti.debian.org squeeze/main libpango1.0-common 1.28.3-1+squeeze2 [114kB] Get:37 http://piatti.debian.org squeeze/main libpixman-1-0 0.16.4-1 [237kB] Get:38 http://piatti.debian.org squeeze/main libpng12-0 1.2.44-1+squeeze1 [180kB] Get:39 http://piatti.debian.org squeeze/main libx11-6 2:1.3.3-4 [846kB] Get:40 http://piatti.debian.org squeeze/main libxau6 1:1.0.6-1 [16.8kB] Get:41 http://piatti.debian.org squeeze/main libxdmcp6 1:1.0.3-2 [19.3kB] Get:42 http://piatti.debian.org squeeze/main libxcb1 1.6-1 [44.3kB] Get:43 http://piatti.debian.org squeeze/main libx11-data 2:1.3.3-4 [190kB] Get:44 http://piatti.debian.org squeeze/main libxcb-render0 1.6-1 [15.8kB] Get:45 http://piatti.debian.org squeeze/main libxcb-render-util0 0.3.6-1 [9772B] Get:46 http://piatti.debian.org squeeze/main libxrender1 1:0.9.6-1 [30.9kB] Get:47 http://piatti.debian.org squeeze/main libcairo2 1.8.10-6 [520kB] Get:48 http://piatti.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:49 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:50 http://piatti.debian.org squeeze/main libglib2.0-0 2.24.2-1 [1122kB] Get:51 http://piatti.debian.org squeeze/main libdatrie1 0.2.4-1 [26.8kB] Get:52 http://piatti.debian.org squeeze/main libpango1.0-0 1.28.3-1+squeeze2 [330kB] Get:53 http://piatti.debian.org squeeze/main libthai0 0.1.14-2 [41.5kB] Get:54 http://piatti.debian.org squeeze/main libthai-data 0.1.14-2 [198kB] Get:55 http://piatti.debian.org squeeze/main libxft2 2.1.14-2 [55.7kB] Get:56 http://piatti.debian.org squeeze/main base-files 6.0squeeze3 [68.8kB] Get:57 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:58 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:59 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:60 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:61 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:62 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:63 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:64 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:65 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:66 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:67 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:68 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:69 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:70 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:71 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:72 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:73 http://piatti.debian.org squeeze/main tzdata 2011k-0squeeze1 [630kB] Get:74 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:75 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:76 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:77 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:78 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:79 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:80 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:81 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:82 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:83 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:84 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:85 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:86 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:87 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:88 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:89 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:90 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:91 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:92 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:93 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:94 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:95 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:96 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:97 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:98 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:99 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:100 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:101 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:102 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:103 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:104 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:105 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:106 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:107 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:108 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:109 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:110 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze3 [997kB] Get:111 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:112 http://piatti.debian.org squeeze/main netbase 4.45 [20.7kB] Get:113 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:114 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:115 http://piatti.debian.org squeeze/main libgpg-error0 1.6-1 [43.9kB] Get:116 http://piatti.debian.org squeeze/main libgcrypt11 1.4.5-2 [282kB] Get:117 http://piatti.debian.org squeeze/main libtasn1-3 2.7-1 [63.1kB] Get:118 http://piatti.debian.org squeeze/main libgnutls26 2.8.6-1 [559kB] Get:119 http://piatti.debian.org squeeze/main libkeyutils1 1.4-1 [6942B] Get:120 http://piatti.debian.org squeeze/main libkrb53 1.8.3+dfsg-4squeeze2 [1373kB] Get:121 http://piatti.debian.org squeeze/main libkrb5support0 1.8.3+dfsg-4squeeze2 [46.0kB] Get:122 http://piatti.debian.org squeeze/main libk5crypto3 1.8.3+dfsg-4squeeze2 [106kB] Get:123 http://piatti.debian.org squeeze/main libkrb5-3 1.8.3+dfsg-4squeeze2 [375kB] Get:124 http://piatti.debian.org squeeze/main libgssapi-krb5-2 1.8.3+dfsg-4squeeze2 [131kB] Get:125 http://piatti.debian.org squeeze/main libsasl2-2 2.1.23.dfsg1-7 [115kB] Get:126 http://piatti.debian.org squeeze/main libldap-2.4-2 2.4.23-7.2 [210kB] Get:127 http://piatti.debian.org squeeze/main libsqlite3-0 3.7.3-1 [397kB] Get:128 http://piatti.debian.org squeeze/main libxml2 2.7.8.dfsg-2+squeeze1 [872kB] Get:129 http://piatti.debian.org squeeze/main mime-support 3.48-1 [34.2kB] Get:130 http://piatti.debian.org squeeze/main python2.6-minimal 2.6.6-8+b1 [1520kB] Get:131 http://piatti.debian.org squeeze/main python2.6 2.6.6-8+b1 [2455kB] Get:132 http://piatti.debian.org squeeze/main python2.5 2.5.5-11 [3053kB] Get:133 http://piatti.debian.org squeeze/main python2.5-minimal 2.5.5-11 [1307kB] Get:134 http://piatti.debian.org squeeze/main python 2.6.6-3+squeeze6 [168kB] Get:135 http://piatti.debian.org squeeze/main python-minimal 2.6.6-3+squeeze6 [33.8kB] Get:136 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:137 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:138 http://piatti.debian.org squeeze/main mysql-common 5.1.49-3 [70.9kB] Get:139 http://piatti.debian.org squeeze/main libmysqlclient16 5.1.49-3 [1985kB] Get:140 http://piatti.debian.org squeeze/main libpq5 8.4.8-0squeeze2 [154kB] Get:141 http://piatti.debian.org squeeze/main libwrap0 7.6.q-19 [51.2kB] Get:142 http://piatti.debian.org squeeze/main flow-tools 1:0.68-12+b1 [1278kB] Get:143 http://piatti.debian.org squeeze/main libcflow-perl 1:0.68-12+b1 [83.1kB] Get:144 http://piatti.debian.org squeeze/main libdbi0 0.8.2-3 [51.8kB] Get:145 http://piatti.debian.org squeeze/main liburi-perl 1.54-2 [98.5kB] Get:146 http://piatti.debian.org squeeze/main libhtml-parser-perl 3.66-1 [115kB] Get:147 http://piatti.debian.org squeeze/main libhtml-table-perl 2.08a-2 [36.7kB] Get:148 http://piatti.debian.org squeeze/main libhtml-tree-perl 3.23-2 [209kB] Get:149 http://piatti.debian.org squeeze/main libsocket6-perl 0.23-1 [29.1kB] Get:150 http://piatti.debian.org squeeze/main libnet-patricia-perl 1.16-1 [31.5kB] Get:151 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:152 http://piatti.debian.org squeeze/main librrd4 1.4.3-1 [319kB] Get:153 http://piatti.debian.org squeeze/main librrds-perl 1.4.3-1 [114kB] Get:154 http://piatti.debian.org squeeze/main libsysfs2 2.1.0+repack-1 [29.2kB] Get:155 http://piatti.debian.org squeeze/main tsconf 1.0-7 [12.6kB] Get:156 http://piatti.debian.org squeeze/main libts-0.0-0 1.0-7 [28.6kB] Get:157 http://piatti.debian.org squeeze/main libwww-perl 5.836-1 [401kB] Get:158 http://piatti.debian.org squeeze/main rrdtool 1.4.3-1 [459kB] Get:159 http://piatti.debian.org squeeze/main ttf-dejavu-extra 2.31-1 [3199kB] Get:160 http://piatti.debian.org squeeze/main ttf-dejavu 2.31-1 [29.3kB] Get:161 http://piatti.debian.org squeeze/main flowscan 1.006-13 [142kB] Get:162 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 73.7MB in 1s (41.6MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9809 files and directories currently installed.) Preparing to replace perl-modules 5.10.0-19lenny3 (using .../perl-modules_5.10.1-17squeeze2_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). Unpacking libc-bin (from .../libc-bin_2.11.2-10_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.2-10_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-10) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-10) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 9912 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9920 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.7. (Reading database ... 9920 files and directories currently installed.) Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 9924 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 9934 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9976 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.11_amd64.deb) ... Unpacking replacement dpkg ... dpkg: warning - unable to delete old directory `/etc/dpkg/origins': Directory not empty Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9981 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9984 files and directories currently installed.) Preparing to replace perl 5.10.0-19lenny3 (using .../perl_5.10.1-17squeeze2_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-base 5.10.0-19lenny3 (using .../perl-base_5.10.1-17squeeze2_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10050 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10050 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10051 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10051 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10051 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10066 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10070 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10070 files and directories currently installed.) Preparing to replace libnewt0.52 0.52.2-11.3+lenny1 (using .../libnewt0.52_0.52.11-1_amd64.deb) ... Unpacking replacement libnewt0.52 ... Preparing to replace libpopt0 1.14-4 (using .../libpopt0_1.16-1_amd64.deb) ... Unpacking replacement libpopt0 ... Preparing to replace whiptail 0.52.2-11.3+lenny1 (using .../whiptail_0.52.11-1_amd64.deb) ... Unpacking replacement whiptail ... Preparing to replace file 4.26-1 (using .../archives/file_5.04-5_amd64.deb) ... Unpacking replacement file ... Preparing to replace libmagic1 4.26-1 (using .../libmagic1_5.04-5_amd64.deb) ... Unpacking replacement libmagic1 ... Preparing to replace defoma 0.11.10-0.2 (using .../defoma_0.11.11_all.deb) ... Unpacking replacement defoma ... Preparing to replace libexpat1 2.0.1-4+lenny3 (using .../libexpat1_2.0.1-7_amd64.deb) ... Unpacking replacement libexpat1 ... Preparing to replace libfreetype6 2.3.7-2+lenny6 (using .../libfreetype6_2.4.2-2.1+squeeze1_amd64.deb) ... Unpacking replacement libfreetype6 ... Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10115 files and directories currently installed.) Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace ttf-dejavu-core 2.25-3 (using .../ttf-dejavu-core_2.31-1_all.deb) ... Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-core.hints ... Unpacking replacement ttf-dejavu-core ... Preparing to replace libfontconfig1 2.6.0-3 (using .../libfontconfig1_2.8.0-2.1_amd64.deb) ... Unpacking replacement libfontconfig1 ... Preparing to replace fontconfig-config 2.6.0-3 (using .../fontconfig-config_2.8.0-2.1_all.deb) ... Unpacking replacement fontconfig-config ... Preparing to replace fontconfig 2.6.0-3 (using .../fontconfig_2.8.0-2.1_amd64.deb) ... Cleaning up font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Unpacking replacement fontconfig ... Preparing to replace libpango1.0-common 1.20.5-6 (using .../libpango1.0-common_1.28.3-1+squeeze2_all.deb) ... Cleaning up font configuration of pango... Cleaning up category xfont.. Unpacking replacement libpango1.0-common ... Preparing to replace libpixman-1-0 0.10.0-2 (using .../libpixman-1-0_0.16.4-1_amd64.deb) ... Unpacking replacement libpixman-1-0 ... Preparing to replace libpng12-0 1.2.27-2+lenny4 (using .../libpng12-0_1.2.44-1+squeeze1_amd64.deb) ... Unpacking replacement libpng12-0 ... Preparing to replace libx11-6 2:1.1.5-2 (using .../libx11-6_2%3a1.3.3-4_amd64.deb) ... Unpacking replacement libx11-6 ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10124 files and directories currently installed.) Removing libxcb-xlib0 ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10117 files and directories currently installed.) Preparing to replace libxau6 1:1.0.3-3 (using .../libxau6_1%3a1.0.6-1_amd64.deb) ... Unpacking replacement libxau6 ... Preparing to replace libxdmcp6 1:1.0.2-3 (using .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ... Unpacking replacement libxdmcp6 ... Preparing to replace libxcb1 1.1-1.2 (using .../libxcb1_1.6-1_amd64.deb) ... Unpacking replacement libxcb1 ... Preparing to replace libx11-data 2:1.1.5-2 (using .../libx11-data_2%3a1.3.3-4_all.deb) ... Unpacking replacement libx11-data ... Preparing to replace libxcb-render0 1.1-1.2 (using .../libxcb-render0_1.6-1_amd64.deb) ... Unpacking replacement libxcb-render0 ... Preparing to replace libxcb-render-util0 0.2.1+git1-1 (using .../libxcb-render-util0_0.3.6-1_amd64.deb) ... Unpacking replacement libxcb-render-util0 ... Preparing to replace libxrender1 1:0.9.4-2 (using .../libxrender1_1%3a0.9.6-1_amd64.deb) ... Unpacking replacement libxrender1 ... Preparing to replace libcairo2 1.6.4-7 (using .../libcairo2_1.8.10-6_amd64.deb) ... Unpacking replacement libcairo2 ... Preparing to replace libpcre3 7.6-2.1 (using .../libpcre3_8.02-1.1_amd64.deb) ... Unpacking replacement libpcre3 ... Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10122 files and directories currently installed.) Preparing to replace libglib2.0-0 2.16.6-3 (using .../libglib2.0-0_2.24.2-1_amd64.deb) ... Unpacking replacement libglib2.0-0 ... Selecting previously deselected package libdatrie1. Unpacking libdatrie1 (from .../libdatrie1_0.2.4-1_amd64.deb) ... Preparing to replace libpango1.0-0 1.20.5-6 (using .../libpango1.0-0_1.28.3-1+squeeze2_amd64.deb) ... Unpacking replacement libpango1.0-0 ... Can not write log, openpty() failed (/dev/pts not mounted?) dpkg: libdatrie0: dependency problems, but removing anyway as you requested: libthai0 depends on libdatrie0 (>= 0.1.2). (Reading database ... 10133 files and directories currently installed.) Removing libdatrie0 ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10125 files and directories currently installed.) Preparing to replace libthai0 0.1.9-4+lenny1 (using .../libthai0_0.1.14-2_amd64.deb) ... Unpacking replacement libthai0 ... Preparing to replace libthai-data 0.1.9-4+lenny1 (using .../libthai-data_0.1.14-2_all.deb) ... Unpacking replacement libthai-data ... Preparing to replace libxft2 2.1.12-3 (using .../libxft2_2.1.14-2_amd64.deb) ... Unpacking replacement libxft2 ... Preparing to replace base-files 5lenny10 (using .../base-files_6.0squeeze3_amd64.deb) ... Unpacking replacement base-files ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze3) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 10126 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10133 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 10129 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10141 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10141 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 10164 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10184 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10184 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 10184 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10188 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10194 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10191 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10191 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10192 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10195 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10197 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10197 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2011k-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2011k-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Dec 9 10:26:56 UTC 2011. Universal Time is now: Fri Dec 9 10:26:56 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10200 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10204 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10205 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 10208 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10237 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20111209T1026.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10238 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10256 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10259 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10261 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10263 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10263 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10269 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10266 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10266 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10267 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10267 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10264 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10264 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10264 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10265 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10216 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10216 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 10216 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10229 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10229 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10230 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10238 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10238 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10282 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10282 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10283 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10283 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10298 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10298 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10297 files and directories currently installed.) Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny13 (using .../libssl0.9.8_0.9.8o-4squeeze3_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace netbase 4.34 (using .../archives/netbase_4.45_all.deb) ... Unpacking replacement netbase ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libgpg-error0 1.4-2 (using .../libgpg-error0_1.6-1_amd64.deb) ... Unpacking replacement libgpg-error0 ... Preparing to replace libgcrypt11 1.4.1-1 (using .../libgcrypt11_1.4.5-2_amd64.deb) ... Unpacking replacement libgcrypt11 ... Preparing to replace libtasn1-3 1.4-1 (using .../libtasn1-3_2.7-1_amd64.deb) ... Unpacking replacement libtasn1-3 ... Preparing to replace libgnutls26 2.4.2-6+lenny2 (using .../libgnutls26_2.8.6-1_amd64.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace libkeyutils1 1.2-9 (using .../libkeyutils1_1.4-1_amd64.deb) ... Unpacking replacement libkeyutils1 ... Preparing to replace libkrb53 1.6.dfsg.4~beta1-5lenny6 (using .../libkrb53_1.8.3+dfsg-4squeeze2_all.deb) ... Unpacking replacement libkrb53 ... Selecting previously deselected package libkrb5support0. Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-4squeeze2_amd64.deb) ... Selecting previously deselected package libk5crypto3. Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-4squeeze2_amd64.deb) ... Selecting previously deselected package libkrb5-3. Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-4squeeze2_amd64.deb) ... Selecting previously deselected package libgssapi-krb5-2. Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.8.3+dfsg-4squeeze2_amd64.deb) ... Preparing to replace libsasl2-2 2.1.22.dfsg1-23+lenny1 (using .../libsasl2-2_2.1.23.dfsg1-7_amd64.deb) ... Unpacking replacement libsasl2-2 ... Preparing to replace libldap-2.4-2 2.4.11-1+lenny2.1 (using .../libldap-2.4-2_2.4.23-7.2_amd64.deb) ... Unpacking replacement libldap-2.4-2 ... Preparing to replace libsqlite3-0 3.5.9-6 (using .../libsqlite3-0_3.7.3-1_amd64.deb) ... Unpacking replacement libsqlite3-0 ... Preparing to replace libxml2 2.6.32.dfsg-5+lenny4 (using .../libxml2_2.7.8.dfsg-2+squeeze1_amd64.deb) ... Unpacking replacement libxml2 ... Preparing to replace mime-support 3.44-1 (using .../mime-support_3.48-1_all.deb) ... Unpacking replacement mime-support ... Selecting previously deselected package python2.6-minimal. Unpacking python2.6-minimal (from .../python2.6-minimal_2.6.6-8+b1_amd64.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.6-8+b1_amd64.deb) ... Preparing to replace python2.5 2.5.2-15+lenny1 (using .../python2.5_2.5.5-11_amd64.deb) ... Unpacking replacement python2.5 ... Preparing to replace python2.5-minimal 2.5.2-15+lenny1 (using .../python2.5-minimal_2.5.5-11_amd64.deb) ... Unpacking replacement python2.5-minimal ... Preparing to replace python 2.5.2-3 (using .../python_2.6.6-3+squeeze6_all.deb) ... Unpacking replacement python ... Preparing to replace python-minimal 2.5.2-3 (using .../python-minimal_2.6.6-3+squeeze6_all.deb) ... Unpacking replacement python-minimal ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace mysql-common 5.0.51a-24+lenny5 (using .../mysql-common_5.1.49-3_all.deb) ... Unpacking replacement mysql-common ... Selecting previously deselected package libmysqlclient16. Unpacking libmysqlclient16 (from .../libmysqlclient16_5.1.49-3_amd64.deb) ... Preparing to replace libpq5 8.3.14-0lenny1 (using .../libpq5_8.4.8-0squeeze2_amd64.deb) ... Unpacking replacement libpq5 ... Preparing to replace libwrap0 7.6.q-16 (using .../libwrap0_7.6.q-19_amd64.deb) ... Unpacking replacement libwrap0 ... Preparing to replace flow-tools 1:0.68-12 (using .../flow-tools_1%3a0.68-12+b1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement flow-tools ... Preparing to replace libcflow-perl 1:0.68-12 (using .../libcflow-perl_1%3a0.68-12+b1_amd64.deb) ... Unpacking replacement libcflow-perl ... Selecting previously deselected package libdbi0. Unpacking libdbi0 (from .../libdbi0_0.8.2-3_amd64.deb) ... Preparing to replace liburi-perl 1.35.dfsg.1-1 (using .../liburi-perl_1.54-2_all.deb) ... Unpacking replacement liburi-perl ... Preparing to replace libhtml-parser-perl 3.56-1+lenny1 (using .../libhtml-parser-perl_3.66-1_amd64.deb) ... Unpacking replacement libhtml-parser-perl ... Preparing to replace libhtml-table-perl 2.04a-1.1 (using .../libhtml-table-perl_2.08a-2_all.deb) ... Unpacking replacement libhtml-table-perl ... Preparing to replace libhtml-tree-perl 3.23-1 (using .../libhtml-tree-perl_3.23-2_all.deb) ... Unpacking replacement libhtml-tree-perl ... Selecting previously deselected package libsocket6-perl. Unpacking libsocket6-perl (from .../libsocket6-perl_0.23-1_amd64.deb) ... Preparing to replace libnet-patricia-perl 1.014-4+b1 (using .../libnet-patricia-perl_1.16-1_amd64.deb) ... Unpacking replacement libnet-patricia-perl ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace librrd4 1.3.1-4 (using .../librrd4_1.4.3-1_amd64.deb) ... Unpacking replacement librrd4 ... Preparing to replace librrds-perl 1.3.1-4 (using .../librrds-perl_1.4.3-1_amd64.deb) ... Unpacking replacement librrds-perl ... Preparing to replace libsysfs2 2.1.0-5 (using .../libsysfs2_2.1.0+repack-1_amd64.deb) ... Unpacking replacement libsysfs2 ... Selecting previously deselected package tsconf. Unpacking tsconf (from .../archives/tsconf_1.0-7_all.deb) ... Replacing files in old package libts-0.0-0 ... Preparing to replace libts-0.0-0 1.0-4 (using .../libts-0.0-0_1.0-7_amd64.deb) ... Unpacking replacement libts-0.0-0 ... Preparing to replace libwww-perl 5.813-1+lenny2 (using .../libwww-perl_5.836-1_all.deb) ... Unpacking replacement libwww-perl ... Preparing to replace rrdtool 1.3.1-4 (using .../rrdtool_1.4.3-1_amd64.deb) ... Unpacking replacement rrdtool ... Preparing to replace ttf-dejavu-extra 2.25-3 (using .../ttf-dejavu-extra_2.31-1_all.deb) ... Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-extra.hints ... Unpacking replacement ttf-dejavu-extra ... Preparing to replace ttf-dejavu 2.25-3 (using .../ttf-dejavu_2.31-1_all.deb) ... Unpacking replacement ttf-dejavu ... Preparing to replace flowscan 1.006-12 (using .../flowscan_1.006-13_all.deb) ... Unpacking replacement flowscan ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libnewt0.52 (0.52.11-1) ... Setting up libpopt0 (1.16-1) ... Setting up whiptail (0.52.11-1) ... Setting up libmagic1 (5.04-5) ... Setting up file (5.04-5) ... Setting up libexpat1 (2.0.1-7) ... Setting up libfreetype6 (2.4.2-2.1+squeeze1) ... Setting up ucf (3.0025+nmu1) ... Setting up ttf-dejavu-core (2.31-1) ... Setting up fontconfig-config (2.8.0-2.1) ... Installing new version of config file /etc/fonts/conf.avail/45-latin.conf ... Installing new version of config file /etc/fonts/conf.avail/60-latin.conf ... Installing new version of config file /etc/fonts/conf.avail/30-urw-aliases.conf ... Installing new version of config file /etc/fonts/conf.avail/90-synthetic.conf ... Installing new version of config file /etc/fonts/conf.avail/65-nonlatin.conf ... Installing new version of config file /etc/fonts/conf.avail/25-unhint-nonlatin.conf ... Installing new version of config file /etc/fonts/conf.avail/65-fonts-persian.conf ... Installing new version of config file /etc/fonts/conf.avail/50-user.conf ... Installing new version of config file /etc/fonts/conf.avail/30-metric-aliases.conf ... Setting up libfontconfig1 (2.8.0-2.1) ... Setting up fontconfig (2.8.0-2.1) ... Updating font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating category type1.. Updating category truetype.. Updating category cid.. Regenerating fonts cache... done. Setting up libpixman-1-0 (0.16.4-1) ... Setting up libpng12-0 (1.2.44-1+squeeze1) ... Setting up libxau6 (1:1.0.6-1) ... Setting up libxdmcp6 (1:1.0.3-2) ... Setting up libxcb1 (1.6-1) ... Setting up libx11-data (2:1.3.3-4) ... Setting up libx11-6 (2:1.3.3-4) ... Setting up libxcb-render0 (1.6-1) ... Setting up libxcb-render-util0 (0.3.6-1) ... Setting up libxrender1 (1:0.9.6-1) ... Setting up libcairo2 (1.8.10-6) ... Setting up libpcre3 (8.02-1.1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libdatrie1 (0.2.4-1) ... Setting up libthai-data (0.1.14-2) ... Setting up libthai0 (0.1.14-2) ... Setting up libxft2 (2.1.14-2) ... Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze3) ... Setting up libudev0 (164-3) ... Setting up netbase (4.45) ... Installing new version of config file /etc/services ... Installing new version of config file /etc/protocols ... Installing new version of config file /etc/init.d/networking ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libgpg-error0 (1.6-1) ... Setting up libgcrypt11 (1.4.5-2) ... Setting up libtasn1-3 (2.7-1) ... Setting up libgnutls26 (2.8.6-1) ... Setting up libkeyutils1 (1.4-1) ... Setting up libkrb5support0 (1.8.3+dfsg-4squeeze2) ... Setting up libk5crypto3 (1.8.3+dfsg-4squeeze2) ... Setting up libkrb5-3 (1.8.3+dfsg-4squeeze2) ... Setting up libgssapi-krb5-2 (1.8.3+dfsg-4squeeze2) ... Setting up libkrb53 (1.8.3+dfsg-4squeeze2) ... Setting up libsasl2-2 (2.1.23.dfsg1-7) ... Setting up libldap-2.4-2 (2.4.23-7.2) ... Setting up libsqlite3-0 (3.7.3-1) ... Setting up libxml2 (2.7.8.dfsg-2+squeeze1) ... Setting up mime-support (3.48-1) ... Installing new version of config file /etc/mime.types ... Setting up python2.6-minimal (2.6.6-8+b1) ... Setting up python2.6 (2.6.6-8+b1) ... Setting up python2.5-minimal (2.5.5-11) ... Setting up python2.5 (2.5.5-11) ... Setting up python-minimal (2.6.6-3+squeeze6) ... Setting up python (2.6.6-3+squeeze6) ... Setting up mysql-common (5.1.49-3) ... Installing new version of config file /etc/mysql/my.cnf ... Setting up libmysqlclient16 (5.1.49-3) ... Setting up libpq5 (8.4.8-0squeeze2) ... Setting up libwrap0 (7.6.q-19) ... Setting up flow-tools (1:0.68-12+b1) ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdbi0 (0.8.2-3) ... Setting up libreadline5 (5.2-7) ... Setting up libsysfs2 (2.1.0+repack-1) ... Setting up tsconf (1.0-7) ... Setting up libts-0.0-0 (1.0-7) ... Setting up ttf-dejavu-extra (2.31-1) ... Setting up ttf-dejavu (2.31-1) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... Setting up perl-modules (5.10.1-17squeeze2) ... Setting up perl (5.10.1-17squeeze2) ... Setting up defoma (0.11.11) ... Setting up libpango1.0-common (1.28.3-1+squeeze2) ... Cleaning up font configuration of pango... Cleaning up category xfont.. Updating font configuration of pango... Cleaning up category xfont.. Updating category xfont.. Setting up libpango1.0-0 (1.28.3-1+squeeze2) ... Setting up libcflow-perl (1:0.68-12+b1) ... Setting up liburi-perl (1.54-2) ... Setting up libhtml-parser-perl (3.66-1) ... Setting up libhtml-table-perl (2.08a-2) ... Setting up libhtml-tree-perl (3.23-2) ... Setting up libsocket6-perl (0.23-1) ... Setting up libnet-patricia-perl (1.16-1) ... Setting up librrd4 (1.4.3-1) ... Setting up librrds-perl (1.4.3-1) ... Setting up libwww-perl (5.836-1) ... Setting up rrdtool (1.4.3-1) ... Setting up flowscan (1.006-13) ... 2m9.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-yf', 'dist-upgrade'] 2m9.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-cache', 'show', 'flowscan'] 2m10.3s DUMP: Package: flowscan Priority: extra Section: net Installed-Size: 520 Maintainer: Guillaume Delacour Architecture: all Version: 1.006-13 Depends: perl (>= 5.6.1), rrdtool, librrds-perl, libboulder-perl, libnet-patricia-perl (>= 1.010), libconfigreader-perl, libcflow-perl (>= 1.024), libhtml-table-perl, flow-tools, debconf (>= 0.5) | debconf-2.0, ksh | mksh | pdksh | zsh Suggests: fprobe Filename: pool/main/f/flowscan/flowscan_1.006-13_all.deb Size: 141668 MD5sum: aeaaf548d58e3f94b098f549d2999a1f SHA1: f1b4c9d90a6c85628812d39c19e2cdb2881a3c21 SHA256: bd60116d94ff4f3e9b235809398231902d2378285c7ab128c08558493902e2dd Description: flow-based IP traffic analysis and visualization tool FlowScan is a freely-available network traffic analysis and visualization tool which uses IP flow data to provide a continuous near real-time view of a network's IP traffic. . FlowScan is a tool to monitor and graph flow information from Cisco and Riverstone routers in near real-time. You can also use FlowScan with flow information generated by programs like fprobe. . Homepage: http://net.doit.wisc.edu/~plonka/FlowScan/ Tag: admin::accounting, implemented-in::perl, implemented-in::shell, network::configuration, protocol::ip, role::program, scope::utility, use::viewing 2m10.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-cache', 'show', 'flowscan'] 2m10.3s INFO: apt-cache knows about the following packages: flowscan 2m10.3s INFO: Running scripts pre_install 2m10.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_install_exceptions'] 2m10.3s DUMP: Debug: running script tmp/scripts/pre_install_exceptions 2m10.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_install_exceptions'] 2m10.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-y', 'install', 'flowscan'] 2m10.7s DUMP: Reading package lists... Building dependency tree... Reading state information... flowscan is already the newest version. The following packages were automatically installed and are no longer required: libts-0.0-0 python2.5-minimal libmysqlclient15off python2.5 libdirectfb-1.0-0 libkrb53 tsconf libdb4.5 libsysfs2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2m10.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', '-y', 'install', 'flowscan'] 2m10.7s INFO: Running scripts post_install 2m10.7s INFO: Running scripts post_distupgrade 2m10.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m11.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m11.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m11.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m12.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m12.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--get-selections', '*'] 2m12.2s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install defoma install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install file install findutils install flow-tools install flowscan install fontconfig install fontconfig-config install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install ksh install libacl1 install libattr1 install libblkid1 install libboulder-perl install libbz2-1.0 install libc-bin install libc6 install libcairo2 install libcflow-perl install libcomerr2 install libconfigreader-perl install libdatrie0 deinstall libdatrie1 install libdb4.5 install libdb4.6 install libdb4.7 install libdb4.8 install libdbi0 install libdevmapper1.02.1 install libdirectfb-1.0-0 install libexpat1 install libfontconfig1 install libfreetype6 install libgcc1 install libgcrypt11 install libgdbm3 install libglib2.0-0 install libgnutls26 install libgpg-error0 install libgssapi-krb5-2 install libhtml-parser-perl install libhtml-table-perl install libhtml-tagset-perl install libhtml-tree-perl install libk5crypto3 install libkeyutils1 install libkrb5-3 install libkrb53 install libkrb5support0 install libldap-2.4-2 install liblocale-gettext-perl install liblzma2 install libmagic1 install libmysqlclient15off install libmysqlclient16 install libncurses5 install libncursesw5 install libnet-patricia-perl install libnewt0.52 install libpam-modules install libpam-runtime install libpam0g install libpango1.0-0 install libpango1.0-common install libpcre3 install libpixman-1-0 install libpng12-0 install libpopt0 install libpq5 install libreadline5 install libreadline6 install librrd4 install librrds-perl install libsasl2-2 install libselinux1 install libsepol1 install libslang2 install libsocket6-perl install libsqlite3-0 install libss2 install libssl0.9.8 install libstdc++6 install libsysfs2 install libtasn1-3 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libthai-data install libthai0 install libts-0.0-0 install libudev0 install liburi-perl install libusb-0.1-4 install libuuid1 install libwrap0 install libwww-perl install libx11-6 install libx11-data install libxau6 install libxcb-render-util0 install libxcb-render0 install libxcb-xlib0 deinstall libxcb1 install libxdmcp6 install libxft2 install libxml-parser-perl install libxml2 install libxrender1 install login install lsb-base install lzma install makedev install mawk install mime-support install mktemp install mount install mysql-common install ncurses-base install ncurses-bin install netbase install passwd install perl install perl-base install perl-modules install procps install python install python-minimal install python2.5 install python2.5-minimal install python2.6 install python2.6-minimal install readline-common install rrdtool install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tsconf install ttf-dejavu install ttf-dejavu-core install ttf-dejavu-extra install tzdata install ucf install util-linux install whiptail install xz-utils install zlib1g install 2m12.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--get-selections', '*'] 2m12.2s INFO: Running scripts pre_remove 2m12.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_remove_exceptions'] 2m12.2s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 2m12.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/pre_remove_exceptions'] 2m12.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'remove', 'librrds-perl', 'libxrender1', 'flow-tools', 'librrd4', 'mysql-common', 'ttf-dejavu', 'libmysqlclient15off', 'tsconf', 'whiptail', 'fontconfig', 'libssl0.9.8', 'libxau6', 'ksh', 'libkeyutils1', 'libxcb-xlib0', 'liburi-perl', 'libgpg-error0', 'libpopt0', 'libfontconfig1', 'libglib2.0-0', 'libk5crypto3', 'libpng12-0', 'defoma', 'libmysqlclient16', 'libwww-perl', 'libwrap0', 'libsqlite3-0', 'libkrb5-3', 'libxcb-render-util0', 'libmagic1', 'libhtml-parser-perl', 'libpcre3', 'python2.6', 'python2.5', 'mime-support', 'libxml-parser-perl', 'libdatrie0', 'libdatrie1', 'python2.6-minimal', 'libsysfs2', 'fontconfig-config', 'libhtml-tagset-perl', 'libxcb1', 'libthai-data', 'ucf', 'libcflow-perl', 'libpango1.0-common', 'libdbi0', 'perl', 'libgcrypt11', 'libxcb-render0', 'libldap-2.4-2', 'libnewt0.52', 'libts-0.0-0', 'python-minimal', 'libcairo2', 'libpq5', 'ttf-dejavu-extra', 'netbase', 'libkrb53', 'libgssapi-krb5-2', 'ttf-dejavu-core', 'libsocket6-perl', 'python2.5-minimal', 'libgnutls26', 'libtasn1-3', 'libxdmcp6', 'libx11-data', 'libpixman-1-0', 'libxml2', 'libfreetype6', 'file', 'libdirectfb-1.0-0', 'libkrb5support0', 'libconfigreader-perl', 'libsasl2-2', 'perl-modules', 'libthai0', 'python', 'libgdbm3', 'libx11-6', 'libnet-patricia-perl', 'libboulder-perl', 'rrdtool', 'libxft2', 'libhtml-tree-perl', 'libhtml-table-perl', 'libdb4.7', 'libdb4.5', 'libpango1.0-0', 'libexpat1', 'flowscan'] 2m15.9s DUMP: Reading package lists... Building dependency tree... Reading state information... Package libxcb-xlib0 is not installed, so not removed Package libdatrie0 is not installed, so not removed The following packages will be REMOVED: defoma file flow-tools flowscan fontconfig fontconfig-config ksh libboulder-perl libcairo2 libcflow-perl libconfigreader-perl libdatrie1 libdb4.5 libdb4.7 libdbi0 libdirectfb-1.0-0 libexpat1 libfontconfig1 libfreetype6 libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 libgssapi-krb5-2 libhtml-parser-perl libhtml-table-perl libhtml-tagset-perl libhtml-tree-perl libk5crypto3 libkeyutils1 libkrb5-3 libkrb53 libkrb5support0 libldap-2.4-2 libmagic1 libmysqlclient15off libmysqlclient16 libnet-patricia-perl libnewt0.52 libpango1.0-0 libpango1.0-common libpcre3 libpixman-1-0 libpng12-0 libpopt0 libpq5 librrd4 librrds-perl libsasl2-2 libsocket6-perl libsqlite3-0 libssl0.9.8 libsysfs2 libtasn1-3 libthai-data libthai0 libts-0.0-0 liburi-perl libwrap0 libwww-perl libx11-6 libx11-data libxau6 libxcb-render-util0 libxcb-render0 libxcb1 libxdmcp6 libxft2 libxml-parser-perl libxml2 libxrender1 mime-support mysql-common netbase perl perl-modules python python-minimal python2.5 python2.5-minimal python2.6 python2.6-minimal rrdtool tsconf ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail 0 upgraded, 0 newly installed, 90 to remove and 0 not upgraded. After this operation, 136 MB disk space will be freed. (Reading database ... 11049 files and directories currently installed.) Removing flowscan ... Removing rrdtool ... Removing librrds-perl ... Removing librrd4 ... Removing libpango1.0-0 ... Removing libpango1.0-common ... Purging font configuration of pango... Purging category xfont.. Removing defoma ... Removing file ... Removing flow-tools ... invoke-rc.d: policy-rc.d denied execution of stop. Removing fontconfig ... Removing libxft2 ... Removing libcairo2 ... Removing libfontconfig1 ... Removing fontconfig-config ... Removing ksh ... Removing libboulder-perl ... Removing libcflow-perl ... Removing libconfigreader-perl ... Removing libthai0 ... Removing libdatrie1 ... Removing libdb4.5 ... Removing libxml-parser-perl ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libnet-patricia-perl ... Removing libsocket6-perl ... Removing libhtml-tagset-perl ... Removing libhtml-table-perl ... Removing libdbi0 ... Removing libdirectfb-1.0-0 ... Removing python ... Removing python2.6 ... Removing libexpat1 ... Removing libfreetype6 ... Removing libpq5 ... Removing libldap-2.4-2 ... Removing libgnutls26 ... Removing libgcrypt11 ... Removing libglib2.0-0 ... Removing libgpg-error0 ... Removing libkrb53 ... Removing libgssapi-krb5-2 ... Removing libkrb5-3 ... Removing libk5crypto3 ... Removing libkrb5support0 ... Removing libkeyutils1 ... Removing libmagic1 ... Removing libmysqlclient15off ... Removing libmysqlclient16 ... Removing whiptail ... Removing libnewt0.52 ... Removing libpcre3 ... Removing libpixman-1-0 ... Removing libpng12-0 ... Removing libpopt0 ... Removing libsasl2-2 ... Removing python2.5 ... Removing libsqlite3-0 ... Removing python-minimal ... Removing python2.6-minimal ... Removing libssl0.9.8 ... Removing libsysfs2 ... Removing libtasn1-3 ... Removing libthai-data ... Removing libts-0.0-0 ... Removing libwrap0 ... Removing libxrender1 ... Removing libx11-6 ... Removing libx11-data ... Removing libxcb-render-util0 ... Removing libxcb-render0 ... Removing libxcb1 ... Removing libxau6 ... Removing libxdmcp6 ... Removing libxml2 ... Removing mime-support ... Removing mysql-common ... Removing netbase ... Removing python2.5-minimal ... Removing tsconf ... Removing ttf-dejavu ... Removing ttf-dejavu-extra ... Removing ttf-dejavu-core ... Removing ucf ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 2m15.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'remove', 'librrds-perl', 'libxrender1', 'flow-tools', 'librrd4', 'mysql-common', 'ttf-dejavu', 'libmysqlclient15off', 'tsconf', 'whiptail', 'fontconfig', 'libssl0.9.8', 'libxau6', 'ksh', 'libkeyutils1', 'libxcb-xlib0', 'liburi-perl', 'libgpg-error0', 'libpopt0', 'libfontconfig1', 'libglib2.0-0', 'libk5crypto3', 'libpng12-0', 'defoma', 'libmysqlclient16', 'libwww-perl', 'libwrap0', 'libsqlite3-0', 'libkrb5-3', 'libxcb-render-util0', 'libmagic1', 'libhtml-parser-perl', 'libpcre3', 'python2.6', 'python2.5', 'mime-support', 'libxml-parser-perl', 'libdatrie0', 'libdatrie1', 'python2.6-minimal', 'libsysfs2', 'fontconfig-config', 'libhtml-tagset-perl', 'libxcb1', 'libthai-data', 'ucf', 'libcflow-perl', 'libpango1.0-common', 'libdbi0', 'perl', 'libgcrypt11', 'libxcb-render0', 'libldap-2.4-2', 'libnewt0.52', 'libts-0.0-0', 'python-minimal', 'libcairo2', 'libpq5', 'ttf-dejavu-extra', 'netbase', 'libkrb53', 'libgssapi-krb5-2', 'ttf-dejavu-core', 'libsocket6-perl', 'python2.5-minimal', 'libgnutls26', 'libtasn1-3', 'libxdmcp6', 'libx11-data', 'libpixman-1-0', 'libxml2', 'libfreetype6', 'file', 'libdirectfb-1.0-0', 'libkrb5support0', 'libconfigreader-perl', 'libsasl2-2', 'perl-modules', 'libthai0', 'python', 'libgdbm3', 'libx11-6', 'libnet-patricia-perl', 'libboulder-perl', 'rrdtool', 'libxft2', 'libhtml-tree-perl', 'libhtml-table-perl', 'libdb4.7', 'libdb4.5', 'libpango1.0-0', 'libexpat1', 'flowscan'] 2m15.9s INFO: Running scripts post_remove 2m15.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', 'librrds-perl', 'libxrender1', 'flow-tools', 'librrd4', 'mysql-common', 'ttf-dejavu', 'libmysqlclient15off', 'tsconf', 'whiptail', 'fontconfig', 'libssl0.9.8', 'libxau6', 'ksh', 'libkeyutils1', 'libxcb-xlib0', 'liburi-perl', 'libgpg-error0', 'libpopt0', 'libfontconfig1', 'libglib2.0-0', 'libk5crypto3', 'libpng12-0', 'defoma', 'libmysqlclient16', 'libwww-perl', 'libwrap0', 'libsqlite3-0', 'libkrb5-3', 'libxcb-render-util0', 'libmagic1', 'libhtml-parser-perl', 'libpcre3', 'python2.6', 'python2.5', 'mime-support', 'libxml-parser-perl', 'libdatrie0', 'libdatrie1', 'python2.6-minimal', 'libsysfs2', 'fontconfig-config', 'libhtml-tagset-perl', 'libxcb1', 'libthai-data', 'ucf', 'libcflow-perl', 'libpango1.0-common', 'libdbi0', 'perl', 'libgcrypt11', 'libxcb-render0', 'libldap-2.4-2', 'libnewt0.52', 'libts-0.0-0', 'python-minimal', 'libcairo2', 'libpq5', 'ttf-dejavu-extra', 'netbase', 'libkrb53', 'libgssapi-krb5-2', 'ttf-dejavu-core', 'libsocket6-perl', 'python2.5-minimal', 'libgnutls26', 'libtasn1-3', 'libxdmcp6', 'libx11-data', 'libpixman-1-0', 'libxml2', 'libfreetype6', 'file', 'libdirectfb-1.0-0', 'libkrb5support0', 'libconfigreader-perl', 'libsasl2-2', 'perl-modules', 'libthai0', 'python', 'libgdbm3', 'libx11-6', 'libnet-patricia-perl', 'libboulder-perl', 'rrdtool', 'libxft2', 'libhtml-tree-perl', 'libhtml-table-perl', 'libdb4.7', 'libdb4.5', 'libpango1.0-0', 'libexpat1'] 2m17.8s DUMP: dpkg: warning: ignoring request to remove librrds-perl which isn't installed. (Reading database ... 6385 files and directories currently installed.) Removing libxrender1 ... Purging configuration files for libxrender1 ... Removing flow-tools ... Purging configuration files for flow-tools ... Removing librrd4 ... Purging configuration files for librrd4 ... Removing mysql-common ... Purging configuration files for mysql-common ... dpkg: warning: ignoring request to remove ttf-dejavu which isn't installed. Removing libmysqlclient15off ... Purging configuration files for libmysqlclient15off ... Removing tsconf ... Purging configuration files for tsconf ... dpkg: warning: ignoring request to remove whiptail which isn't installed. Removing fontconfig ... Purging configuration files for fontconfig ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing ksh ... Purging configuration files for ksh ... Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing libxcb-xlib0 ... Purging configuration files for libxcb-xlib0 ... dpkg: warning: ignoring request to remove liburi-perl which isn't installed. Removing libgpg-error0 ... Purging configuration files for libgpg-error0 ... Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing libfontconfig1 ... Purging configuration files for libfontconfig1 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libk5crypto3 ... Purging configuration files for libk5crypto3 ... Removing libpng12-0 ... Purging configuration files for libpng12-0 ... Removing defoma ... Purging configuration files for defoma ... Removing libmysqlclient16 ... Purging configuration files for libmysqlclient16 ... dpkg: warning: ignoring request to remove libwww-perl which isn't installed. Removing libwrap0 ... Purging configuration files for libwrap0 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libkrb5-3 ... Purging configuration files for libkrb5-3 ... Removing libxcb-render-util0 ... Purging configuration files for libxcb-render-util0 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... dpkg: warning: ignoring request to remove libhtml-parser-perl which isn't installed. Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing python2.6 ... Purging configuration files for python2.6 ... Removing python2.5 ... Purging configuration files for python2.5 ... Removing mime-support ... Purging configuration files for mime-support ... dpkg: warning: ignoring request to remove libxml-parser-perl which isn't installed. Removing libdatrie0 ... Purging configuration files for libdatrie0 ... Removing libdatrie1 ... Purging configuration files for libdatrie1 ... Removing python2.6-minimal ... Purging configuration files for python2.6-minimal ... Removing libsysfs2 ... Purging configuration files for libsysfs2 ... Removing fontconfig-config ... Purging configuration files for fontconfig-config ... dpkg: warning: ignoring request to remove libhtml-tagset-perl which isn't installed. Removing libxcb1 ... Purging configuration files for libxcb1 ... dpkg: warning: ignoring request to remove libthai-data which isn't installed. Removing ucf ... Purging configuration files for ucf ... dpkg: warning: ignoring request to remove libcflow-perl which isn't installed. Removing libpango1.0-common ... Purging configuration files for libpango1.0-common ... Removing libdbi0 ... Purging configuration files for libdbi0 ... dpkg: warning: ignoring request to remove perl which isn't installed. Removing libgcrypt11 ... Purging configuration files for libgcrypt11 ... Removing libxcb-render0 ... Purging configuration files for libxcb-render0 ... Removing libldap-2.4-2 ... Purging configuration files for libldap-2.4-2 ... Removing libnewt0.52 ... Purging configuration files for libnewt0.52 ... Removing libts-0.0-0 ... Purging configuration files for libts-0.0-0 ... dpkg: warning: ignoring request to remove python-minimal which isn't installed. Removing libcairo2 ... Purging configuration files for libcairo2 ... Removing libpq5 ... Purging configuration files for libpq5 ... dpkg: warning: ignoring request to remove ttf-dejavu-extra which isn't installed. Removing netbase ... Purging configuration files for netbase ... dpkg: warning: ignoring request to remove libkrb53 which isn't installed. Removing libgssapi-krb5-2 ... Purging configuration files for libgssapi-krb5-2 ... dpkg: warning: ignoring request to remove ttf-dejavu-core which isn't installed. dpkg: warning: ignoring request to remove libsocket6-perl which isn't installed. Removing python2.5-minimal ... Purging configuration files for python2.5-minimal ... Removing libgnutls26 ... Purging configuration files for libgnutls26 ... Removing libtasn1-3 ... Purging configuration files for libtasn1-3 ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... dpkg: warning: ignoring request to remove libx11-data which isn't installed. Removing libpixman-1-0 ... Purging configuration files for libpixman-1-0 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libfreetype6 ... Purging configuration files for libfreetype6 ... Removing file ... Purging configuration files for file ... Removing libdirectfb-1.0-0 ... Purging configuration files for libdirectfb-1.0-0 ... Removing libkrb5support0 ... Purging configuration files for libkrb5support0 ... dpkg: warning: ignoring request to remove libconfigreader-perl which isn't installed. Removing libsasl2-2 ... Purging configuration files for libsasl2-2 ... Removing perl-modules ... Purging configuration files for perl-modules ... Removing libthai0 ... Purging configuration files for libthai0 ... Removing python ... Purging configuration files for python ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... Removing libx11-6 ... Purging configuration files for libx11-6 ... dpkg: warning: ignoring request to remove libnet-patricia-perl which isn't installed. dpkg: warning: ignoring request to remove libboulder-perl which isn't installed. dpkg: warning: ignoring request to remove rrdtool which isn't installed. Removing libxft2 ... Purging configuration files for libxft2 ... dpkg: warning: ignoring request to remove libhtml-tree-perl which isn't installed. dpkg: warning: ignoring request to remove libhtml-table-perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. dpkg: warning: ignoring request to remove libdb4.5 which isn't installed. Removing libpango1.0-0 ... Purging configuration files for libpango1.0-0 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... 2m17.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', 'librrds-perl', 'libxrender1', 'flow-tools', 'librrd4', 'mysql-common', 'ttf-dejavu', 'libmysqlclient15off', 'tsconf', 'whiptail', 'fontconfig', 'libssl0.9.8', 'libxau6', 'ksh', 'libkeyutils1', 'libxcb-xlib0', 'liburi-perl', 'libgpg-error0', 'libpopt0', 'libfontconfig1', 'libglib2.0-0', 'libk5crypto3', 'libpng12-0', 'defoma', 'libmysqlclient16', 'libwww-perl', 'libwrap0', 'libsqlite3-0', 'libkrb5-3', 'libxcb-render-util0', 'libmagic1', 'libhtml-parser-perl', 'libpcre3', 'python2.6', 'python2.5', 'mime-support', 'libxml-parser-perl', 'libdatrie0', 'libdatrie1', 'python2.6-minimal', 'libsysfs2', 'fontconfig-config', 'libhtml-tagset-perl', 'libxcb1', 'libthai-data', 'ucf', 'libcflow-perl', 'libpango1.0-common', 'libdbi0', 'perl', 'libgcrypt11', 'libxcb-render0', 'libldap-2.4-2', 'libnewt0.52', 'libts-0.0-0', 'python-minimal', 'libcairo2', 'libpq5', 'ttf-dejavu-extra', 'netbase', 'libkrb53', 'libgssapi-krb5-2', 'ttf-dejavu-core', 'libsocket6-perl', 'python2.5-minimal', 'libgnutls26', 'libtasn1-3', 'libxdmcp6', 'libx11-data', 'libpixman-1-0', 'libxml2', 'libfreetype6', 'file', 'libdirectfb-1.0-0', 'libkrb5support0', 'libconfigreader-perl', 'libsasl2-2', 'perl-modules', 'libthai0', 'python', 'libgdbm3', 'libx11-6', 'libnet-patricia-perl', 'libboulder-perl', 'rrdtool', 'libxft2', 'libhtml-tree-perl', 'libhtml-table-perl', 'libdb4.7', 'libdb4.5', 'libpango1.0-0', 'libexpat1'] 2m17.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', 'flowscan'] 2m17.8s DUMP: (Reading database ... 6303 files and directories currently installed.) Removing flowscan ... Purging configuration files for flowscan ... 2m17.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', 'flowscan'] 2m17.8s INFO: Running scripts post_purge 2m17.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/post_purge_exceptions'] 2m17.8s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 2m17.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'tmp/scripts/post_purge_exceptions'] 2m17.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', '--pending'] 2m17.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--purge', '--pending'] 2m17.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--remove', '--pending'] 2m17.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg', '--remove', '--pending'] 2m17.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'clean'] 2m17.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'clean'] 2m17.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg-divert', '--list'] 2m17.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 2m17.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'dpkg-divert', '--list'] 2m17.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'clean'] 2m17.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'apt-get', 'clean'] 2m18.9s INFO: Warning: Package purging left files on system: /var/lib/python not owned /var/lib/python/python2.6_already_installed not owned 2m18.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m19.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpWOimX4'] 2m19.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'umount', '/proc'] 2m19.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpWOimX4', 'umount', '/proc'] 2m19.6s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpWOimX4 2m19.6s INFO: PASS: Upgrading between Debian distributions. 2m19.6s INFO: PASS: All tests. 2m19.6s INFO: piuparts run ends. End: 2011-12-09 10:27:33 UTC