Start: 2011-01-13 14:10:18 UTC Package: hamfax Priority: optional Section: hamradio Installed-Size: 316 Maintainer: Debian Hamradio Maintainers Architecture: amd64 Version: 0.6.4-5.1 Depends: libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libice6 (>= 1:1.0.0), libqt3-mt (>= 3:3.3.8b), libsm6, libstdc++6 (>= 4.1.1), libx11-6, libxext6, libxi6, libxmu6, libxt6 Filename: pool/main/h/hamfax/hamfax_0.6.4-5.1_amd64.deb Size: 86228 MD5sum: f5387ca4ca65a5101cafce77d3c3c4fc SHA1: fa8d8cef09513206c40cedba75159f6a6afa0bb6 SHA256: 50256e11ab5aa8d3d3d62fb0c4fd82ee5ea6c52292f37aa68f51dd828c34d06c Description: Receive/send radio facsimile transmissions with Soundcard/PTC-II With this package you can send or receive radio facsimile transmissions using either a Linux-supported soundcard or an SCS PTC-II data controller. . Radio facsimile transmission are used most commonly by meteorological bureaus to provide weather maps to aircraft and shipping. Tag: hardware::hamradio, interface::x11, uitoolkit::qt, use::transmission, works-with::fax, x11::application Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ hamfax Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.40~201101102318 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ hamfax 0m0.0s INFO: Running on: Linux piatti 2.6.32.28-dsa-amd64 #1 SMP Mon Jan 10 11:32:53 CET 2011 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpH9ReGd 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpH9ReGd 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpH9ReGd', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpH9ReGd', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Created policy-rc.d and chmodded it. 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'update'] 0m1.6s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'update'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', '-yf', 'upgrade'] 0m2.0s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', '-yf', 'upgrade'] 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'clean'] 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'clean'] 0m2.0s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpH9ReGd/tmp/scripts/ 0m2.0s INFO: Running scripts post_setup 0m2.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpH9ReGd to squeeze 0m2.0s INFO: Running scripts pre_distupgrade 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'update'] 0m4.0s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8609kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.0kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8889kB in 0s (10.2MB/s) Reading package lists... 0m4.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'update'] 0m4.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', '-yf', 'dist-upgrade'] 0m24.2s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.4MB of archives. After this operation, 13.5MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:75 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.4MB in 0s (47.7MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5894 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5896 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5897 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5905 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5905 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5915 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5957 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5963 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5970 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5966 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6001 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6027 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-17_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6115 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6119 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6123 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6129 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6127 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6130 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Jan 13 14:10:33 UTC 2011. Universal Time is now: Thu Jan 13 14:10:33 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6135 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6139 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6143 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110113T1410.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6191 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6196 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6204 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6200 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6151 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6165 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6234 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', '-yf', 'dist-upgrade'] 0m24.2s INFO: Running scripts post_distupgrade 0m24.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpH9ReGd'] 0m24.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpH9ReGd'] 0m24.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'clean'] 0m24.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'apt-get', 'clean'] 0m25.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'dpkg', '--get-selections', '*'] 0m25.1s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m25.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'dpkg', '--get-selections', '*'] 0m25.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'umount', '/proc'] 0m25.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpH9ReGd', 'umount', '/proc'] 0m25.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpH9ReGd 0m25.5s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpB9Y7Dc 0m25.5s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpB9Y7Dc 0m25.5s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', '-zxf', 'lenny.tar.gz'] 0m27.3s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', '-zxf', 'lenny.tar.gz'] 0m27.3s DEBUG: Created policy-rc.d and chmodded it. 0m27.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m27.3s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m27.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m27.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-yf', 'upgrade'] 0m27.7s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-yf', 'upgrade'] 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'clean'] 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'clean'] 0m27.7s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpB9Y7Dc/tmp/scripts/ 0m27.7s INFO: Running scripts post_setup 0m27.7s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m27.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 0m27.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 0m27.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m27.9s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m27.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m27.9s INFO: Running scripts pre_install 0m27.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_install_exceptions'] 0m27.9s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m27.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_install_exceptions'] 0m27.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-y', 'install', 'hamfax'] 0m43.1s DUMP: Reading package lists... Building dependency tree... The following extra packages will be installed: defoma file fontconfig fontconfig-config libaudio2 libaudiofile0 libexpat1 libfontconfig1 libfreetype6 libgdbm3 libice6 libjpeg62 liblcms1 libmagic1 libmng1 libnewt0.52 libpng12-0 libpopt0 libqt3-mt libsm6 libx11-6 libx11-data libxau6 libxcb-xlib0 libxcb1 libxcursor1 libxdmcp6 libxext6 libxfixes3 libxft2 libxi6 libxinerama1 libxmu6 libxrandr2 libxrender1 libxt6 perl perl-modules ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail x11-common Suggested packages: defoma-doc dfontmgr psfontmgr x-ttcidfont-conf nas libfreetype6-dev liblcms-utils libqt3-mt-mysql libqt3-mt-odbc libqt3-mt-psql perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl Recommended packages: libft-perl libfribidi0 libgl1-mesa-glx libgl1 libglu1-mesa libglu1 netbase The following NEW packages will be installed: defoma file fontconfig fontconfig-config hamfax libaudio2 libaudiofile0 libexpat1 libfontconfig1 libfreetype6 libgdbm3 libice6 libjpeg62 liblcms1 libmagic1 libmng1 libnewt0.52 libpng12-0 libpopt0 libqt3-mt libsm6 libx11-6 libx11-data libxau6 libxcb-xlib0 libxcb1 libxcursor1 libxdmcp6 libxext6 libxfixes3 libxft2 libxi6 libxinerama1 libxmu6 libxrandr2 libxrender1 libxt6 perl perl-modules ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf whiptail x11-common 0 upgraded, 45 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4MB of archives. After this operation, 67.5MB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main x11-common 1:7.3+20 [343kB] Get:2 http://piatti.debian.org lenny/main libxau6 1:1.0.3-3 [12.5kB] Get:3 http://piatti.debian.org lenny/main libxdmcp6 1:1.0.2-3 [17.9kB] Get:4 http://piatti.debian.org lenny/main libxcb1 1.1-1.2 [47.5kB] Get:5 http://piatti.debian.org lenny/main libxcb-xlib0 1.1-1.2 [15.4kB] Get:6 http://piatti.debian.org lenny/main libx11-data 2:1.1.5-2 [169kB] Get:7 http://piatti.debian.org lenny/main libx11-6 2:1.1.5-2 [660kB] Get:8 http://piatti.debian.org lenny/main libxfixes3 1:4.0.3-2 [10.8kB] Get:9 http://piatti.debian.org lenny/main libice6 2:1.0.4-1 [50.1kB] Get:10 http://piatti.debian.org lenny/main libsm6 2:1.0.3-2 [23.4kB] Get:11 http://piatti.debian.org lenny/main libxt6 1:1.0.5-3 [185kB] Get:12 http://piatti.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:13 http://piatti.debian.org lenny/main libnewt0.52 0.52.2-11.3+lenny1 [72.1kB] Get:14 http://piatti.debian.org lenny/main libpopt0 1.14-4 [46.4kB] Get:15 http://piatti.debian.org lenny/main whiptail 0.52.2-11.3+lenny1 [35.8kB] Get:16 http://piatti.debian.org lenny/main libmagic1 4.26-1 [369kB] Get:17 http://piatti.debian.org lenny/main file 4.26-1 [44.5kB] Get:18 http://piatti.debian.org lenny/main perl-modules 5.10.0-19lenny2 [3198kB] Get:19 http://piatti.debian.org lenny/main perl 5.10.0-19lenny2 [5220kB] Get:20 http://piatti.debian.org lenny/main ucf 3.0016 [64.4kB] Get:21 http://piatti.debian.org lenny/main defoma 0.11.10-0.2 [101kB] Get:22 http://piatti.debian.org lenny/main libexpat1 2.0.1-4+lenny3 [137kB] Get:23 http://piatti.debian.org lenny/main libfreetype6 2.3.7-2+lenny4 [386kB] Get:24 http://piatti.debian.org lenny/main ttf-dejavu-core 2.25-3 [1360kB] Get:25 http://piatti.debian.org lenny/main ttf-dejavu-extra 2.25-3 [2982kB] Get:26 http://piatti.debian.org lenny/main ttf-dejavu 2.25-3 [25.8kB] Get:27 http://piatti.debian.org lenny/main fontconfig-config 2.6.0-3 [64.7kB] Get:28 http://piatti.debian.org lenny/main libfontconfig1 2.6.0-3 [121kB] Get:29 http://piatti.debian.org lenny/main fontconfig 2.6.0-3 [164kB] Get:30 http://piatti.debian.org lenny/main libaudiofile0 0.2.6-7+lenny1 [84.0kB] Get:31 http://piatti.debian.org lenny/main libaudio2 1.9.1-5 [83.6kB] Get:32 http://piatti.debian.org lenny/main libjpeg62 6b-14 [89.4kB] Get:33 http://piatti.debian.org lenny/main liblcms1 1.17.dfsg-1+lenny2 [109kB] Get:34 http://piatti.debian.org lenny/main libmng1 1.0.9-1 [196kB] Get:35 http://piatti.debian.org lenny/main libpng12-0 1.2.27-2+lenny4 [168kB] Get:36 http://piatti.debian.org lenny/main libxrender1 1:0.9.4-2 [28.1kB] Get:37 http://piatti.debian.org lenny/main libxcursor1 1:1.1.9-1 [25.6kB] Get:38 http://piatti.debian.org lenny/main libxext6 2:1.0.4-2 [37.3kB] Get:39 http://piatti.debian.org lenny/main libxft2 2.1.12-3 [52.1kB] Get:40 http://piatti.debian.org lenny/main libxi6 2:1.1.4-1 [26.5kB] Get:41 http://piatti.debian.org lenny/main libxinerama1 2:1.0.3-2 [10.5kB] Get:42 http://piatti.debian.org lenny/main libxrandr2 2:1.2.3-1 [24.0kB] Get:43 http://piatti.debian.org lenny/main libqt3-mt 3:3.3.8b-5 [3418kB] Get:44 http://piatti.debian.org lenny/main libxmu6 2:1.0.4-1 [55.4kB] Get:45 http://piatti.debian.org lenny/main hamfax 0.6.4-5 [89.0kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 20.4MB in 0s (41.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package x11-common. (Reading database ... 5894 files and directories currently installed.) Unpacking x11-common (from .../x11-common_1%3a7.3+20_all.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.3-3_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.1-1.2_amd64.deb) ... Selecting previously deselected package libxcb-xlib0. Unpacking libxcb-xlib0 (from .../libxcb-xlib0_1.1-1.2_amd64.deb) ... Selecting previously deselected package libx11-data. Unpacking libx11-data (from .../libx11-data_2%3a1.1.5-2_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.1.5-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up x11-common (1:7.3+20) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libxfixes3. (Reading database ... 6199 files and directories currently installed.) Unpacking libxfixes3 (from .../libxfixes3_1%3a4.0.3-2_amd64.deb) ... Selecting previously deselected package libice6. Unpacking libice6 (from .../libice6_2%3a1.0.4-1_amd64.deb) ... Selecting previously deselected package libsm6. Unpacking libsm6 (from .../libsm6_2%3a1.0.3-2_amd64.deb) ... Selecting previously deselected package libxt6. Unpacking libxt6 (from .../libxt6_1%3a1.0.5-3_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ... Selecting previously deselected package libnewt0.52. Unpacking libnewt0.52 (from .../libnewt0.52_0.52.2-11.3+lenny1_amd64.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.14-4_amd64.deb) ... Selecting previously deselected package whiptail. Unpacking whiptail (from .../whiptail_0.52.2-11.3+lenny1_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_4.26-1_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny2_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-19lenny2_amd64.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Selecting previously deselected package defoma. Unpacking defoma (from .../defoma_0.11.10-0.2_all.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4+lenny3_amd64.deb) ... Selecting previously deselected package libfreetype6. Unpacking libfreetype6 (from .../libfreetype6_2.3.7-2+lenny4_amd64.deb) ... Selecting previously deselected package ttf-dejavu-core. Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.25-3_all.deb) ... Selecting previously deselected package ttf-dejavu-extra. Unpacking ttf-dejavu-extra (from .../ttf-dejavu-extra_2.25-3_all.deb) ... Selecting previously deselected package ttf-dejavu. Unpacking ttf-dejavu (from .../ttf-dejavu_2.25-3_all.deb) ... Selecting previously deselected package fontconfig-config. Unpacking fontconfig-config (from .../fontconfig-config_2.6.0-3_all.deb) ... Selecting previously deselected package libfontconfig1. Unpacking libfontconfig1 (from .../libfontconfig1_2.6.0-3_amd64.deb) ... Selecting previously deselected package fontconfig. Unpacking fontconfig (from .../fontconfig_2.6.0-3_amd64.deb) ... Selecting previously deselected package libaudiofile0. Unpacking libaudiofile0 (from .../libaudiofile0_0.2.6-7+lenny1_amd64.deb) ... Selecting previously deselected package libaudio2. Unpacking libaudio2 (from .../libaudio2_1.9.1-5_amd64.deb) ... Selecting previously deselected package libjpeg62. Unpacking libjpeg62 (from .../libjpeg62_6b-14_amd64.deb) ... Selecting previously deselected package liblcms1. Unpacking liblcms1 (from .../liblcms1_1.17.dfsg-1+lenny2_amd64.deb) ... Selecting previously deselected package libmng1. Unpacking libmng1 (from .../libmng1_1.0.9-1_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.27-2+lenny4_amd64.deb) ... Selecting previously deselected package libxrender1. Unpacking libxrender1 (from .../libxrender1_1%3a0.9.4-2_amd64.deb) ... Selecting previously deselected package libxcursor1. Unpacking libxcursor1 (from .../libxcursor1_1%3a1.1.9-1_amd64.deb) ... Selecting previously deselected package libxext6. Unpacking libxext6 (from .../libxext6_2%3a1.0.4-2_amd64.deb) ... Selecting previously deselected package libxft2. Unpacking libxft2 (from .../libxft2_2.1.12-3_amd64.deb) ... Selecting previously deselected package libxi6. Unpacking libxi6 (from .../libxi6_2%3a1.1.4-1_amd64.deb) ... Selecting previously deselected package libxinerama1. Unpacking libxinerama1 (from .../libxinerama1_2%3a1.0.3-2_amd64.deb) ... Selecting previously deselected package libxrandr2. Unpacking libxrandr2 (from .../libxrandr2_2%3a1.2.3-1_amd64.deb) ... Selecting previously deselected package libqt3-mt. Unpacking libqt3-mt (from .../libqt3-mt_3%3a3.3.8b-5_amd64.deb) ... Selecting previously deselected package libxmu6. Unpacking libxmu6 (from .../libxmu6_2%3a1.0.4-1_amd64.deb) ... Selecting previously deselected package hamfax. Unpacking hamfax (from .../hamfax_0.6.4-5_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libxau6 (1:1.0.3-3) ... Setting up libxdmcp6 (1:1.0.2-3) ... Setting up libxcb1 (1.1-1.2) ... Setting up libxcb-xlib0 (1.1-1.2) ... Setting up libx11-data (2:1.1.5-2) ... Setting up libx11-6 (2:1.1.5-2) ... Setting up libxfixes3 (1:4.0.3-2) ... Setting up libice6 (2:1.0.4-1) ... Setting up libsm6 (2:1.0.3-2) ... Setting up libxt6 (1:1.0.5-3) ... Setting up libgdbm3 (1.8.3-3) ... Setting up libnewt0.52 (0.52.2-11.3+lenny1) ... Setting up libpopt0 (1.14-4) ... Setting up whiptail (0.52.2-11.3+lenny1) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up ucf (3.0016) ... Setting up libexpat1 (2.0.1-4+lenny3) ... Setting up libfreetype6 (2.3.7-2+lenny4) ... Setting up libaudiofile0 (0.2.6-7+lenny1) ... Setting up libaudio2 (1.9.1-5) ... Setting up libjpeg62 (6b-14) ... Setting up liblcms1 (1.17.dfsg-1+lenny2) ... Setting up libmng1 (1.0.9-1) ... Setting up libpng12-0 (1.2.27-2+lenny4) ... Setting up libxrender1 (1:0.9.4-2) ... Setting up libxcursor1 (1:1.1.9-1) ... Setting up libxext6 (2:1.0.4-2) ... Setting up libxi6 (2:1.1.4-1) ... Setting up libxinerama1 (2:1.0.3-2) ... Setting up libxrandr2 (2:1.2.3-1) ... Setting up libxmu6 (2:1.0.4-1) ... Setting up perl-modules (5.10.0-19lenny2) ... Setting up perl (5.10.0-19lenny2) ... Setting up defoma (0.11.10-0.2) ... Setting up ttf-dejavu-core (2.25-3) ... Setting up ttf-dejavu-extra (2.25-3) ... Setting up ttf-dejavu (2.25-3) ... Setting up fontconfig-config (2.6.0-3) ... Setting up libfontconfig1 (2.6.0-3) ... Setting up fontconfig (2.6.0-3) ... Updating font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating category type1.. Updating category truetype.. Updating category cid.. Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Cleaning up old fontconfig caches... done. Regenerating fonts cache... done. Setting up libxft2 (2.1.12-3) ... Setting up libqt3-mt (3:3.3.8b-5) ... Setting up hamfax (0.6.4-5) ... 0m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-y', 'install', 'hamfax'] 0m43.1s INFO: Running scripts pre_upgrade 0m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_upgrade_exceptions'] 0m43.1s DUMP: Debug: running script tmp/scripts/pre_upgrade_exceptions 0m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_upgrade_exceptions'] 0m43.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 0m43.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 0m43.4s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpB9Y7Dc to squeeze 0m43.4s INFO: Running scripts pre_distupgrade 0m43.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m45.4s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8609kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.0kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8889kB in 0s (10.0MB/s) Reading package lists... 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'update'] 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-yf', 'dist-upgrade'] 1m35.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libxcb-xlib0 The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.7 libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils defoma diff dpkg e2fslibs e2fsprogs file findutils fontconfig fontconfig-config gcc-4.3-base gnupg gpgv grep gzip hamfax hostname initscripts libacl1 libattr1 libaudio2 libaudiofile0 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libexpat1 libfontconfig1 libfreetype6 libgcc1 libgdbm3 libice6 libjpeg62 liblcms1 liblocale-gettext-perl libmagic1 libmng1 libncurses5 libnewt0.52 libpam-modules libpam-runtime libpam0g libpng12-0 libpopt0 libqt3-mt libreadline5 libselinux1 libsepol1 libslang2 libsm6 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 libx11-6 libx11-data libxau6 libxcb1 libxcursor1 libxdmcp6 libxext6 libxfixes3 libxft2 libxi6 libxinerama1 libxmu6 libxrandr2 libxrender1 libxt6 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl perl-base perl-modules procps readline-common sed sysv-rc sysvinit sysvinit-utils tar ttf-dejavu ttf-dejavu-core ttf-dejavu-extra tzdata ucf util-linux whiptail x11-common zlib1g 111 upgraded, 14 newly installed, 1 to remove and 0 not upgraded. Need to get 56.1MB of archives. After this operation, 16.7MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:2 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:3 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:4 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:5 http://piatti.debian.org squeeze/main libxau6 1:1.0.6-1 [16.8kB] Get:6 http://piatti.debian.org squeeze/main libxdmcp6 1:1.0.3-2 [19.3kB] Get:7 http://piatti.debian.org squeeze/main libx11-6 2:1.3.3-4 [846kB] Get:8 http://piatti.debian.org squeeze/main libxcb1 1.6-1 [44.3kB] Get:9 http://piatti.debian.org squeeze/main libx11-data 2:1.3.3-4 [190kB] Get:10 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:11 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:12 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:13 http://piatti.debian.org squeeze/main dpkg 1.15.8.7 [2392kB] Get:14 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:15 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:16 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:17 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:18 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:19 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:20 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:21 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:22 http://piatti.debian.org squeeze/main perl-modules 5.10.1-17 [3482kB] Get:23 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB] Get:24 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:25 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:26 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:27 http://piatti.debian.org squeeze/main perl 5.10.1-17 [4461kB] Get:28 http://piatti.debian.org squeeze/main perl-base 5.10.1-17 [1066kB] Get:29 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:30 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:31 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:32 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:33 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:34 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:35 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:36 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:37 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:38 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:39 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:40 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:41 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:42 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:43 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:44 http://piatti.debian.org squeeze/main lsb-base 3.2-23.1 [20.5kB] Get:45 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:46 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:47 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:48 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:49 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:50 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:51 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:52 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:53 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:54 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:55 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:56 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:57 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:58 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:59 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:60 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:61 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:62 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:63 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:64 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:65 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:66 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:67 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:68 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:69 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:70 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:71 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:72 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:73 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:74 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:75 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:76 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:77 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:78 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:79 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:80 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:81 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:82 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:83 http://piatti.debian.org squeeze/main libnewt0.52 0.52.11-1 [71.8kB] Get:84 http://piatti.debian.org squeeze/main libpopt0 1.16-1 [54.1kB] Get:85 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:86 http://piatti.debian.org squeeze/main whiptail 0.52.11-1 [40.2kB] Get:87 http://piatti.debian.org squeeze/main file 5.04-5 [49.7kB] Get:88 http://piatti.debian.org squeeze/main libmagic1 5.04-5 [234kB] Get:89 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:90 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:91 http://piatti.debian.org squeeze/main defoma 0.11.11 [101kB] Get:92 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:93 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:94 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:95 http://piatti.debian.org squeeze/main libexpat1 2.0.1-7 [137kB] Get:96 http://piatti.debian.org squeeze/main libfreetype6 2.4.2-2.1 [378kB] Get:97 http://piatti.debian.org squeeze/main ttf-dejavu-core 2.31-1 [1451kB] Get:98 http://piatti.debian.org squeeze/main libfontconfig1 2.8.0-2.1 [281kB] Get:99 http://piatti.debian.org squeeze/main fontconfig-config 2.8.0-2.1 [217kB] Get:100 http://piatti.debian.org squeeze/main fontconfig 2.8.0-2.1 [334kB] Get:101 http://piatti.debian.org squeeze/main libaudiofile0 0.2.6-8 [84.4kB] Get:102 http://piatti.debian.org squeeze/main x11-common 1:7.5+8 [274kB] Get:103 http://piatti.debian.org squeeze/main libice6 2:1.0.6-2 [53.8kB] Get:104 http://piatti.debian.org squeeze/main libsm6 2:1.1.1-1 [25.0kB] Get:105 http://piatti.debian.org squeeze/main libxt6 1:1.0.7-1 [192kB] Get:106 http://piatti.debian.org squeeze/main libaudio2 1.9.2-4 [84.2kB] Get:107 http://piatti.debian.org squeeze/main libjpeg62 6b1-1 [94.0kB] Get:108 http://piatti.debian.org squeeze/main liblcms1 1.18.dfsg-1.2+b3 [112kB] Get:109 http://piatti.debian.org squeeze/main libmng1 1.0.10-1+b1 [232kB] Get:110 http://piatti.debian.org squeeze/main libpng12-0 1.2.44-1 [180kB] Get:111 http://piatti.debian.org squeeze/main libxfixes3 1:4.0.5-1 [19.1kB] Get:112 http://piatti.debian.org squeeze/main libxrender1 1:0.9.6-1 [30.9kB] Get:113 http://piatti.debian.org squeeze/main libxcursor1 1:1.1.10-2 [26.4kB] Get:114 http://piatti.debian.org squeeze/main libxext6 2:1.1.2-1 [45.3kB] Get:115 http://piatti.debian.org squeeze/main libxft2 2.1.14-2 [55.7kB] Get:116 http://piatti.debian.org squeeze/main libxi6 2:1.3-6 [56.2kB] Get:117 http://piatti.debian.org squeeze/main libxinerama1 2:1.1-3 [12.5kB] Get:118 http://piatti.debian.org squeeze/main libxrandr2 2:1.3.0-3 [28.4kB] Get:119 http://piatti.debian.org squeeze/main libqt3-mt 3:3.3.8b-7+b1 [3517kB] Get:120 http://piatti.debian.org squeeze/main libxmu6 2:1.0.5-2 [58.4kB] Get:121 http://piatti.debian.org squeeze/main hamfax 0.6.4-5.1 [86.2kB] Get:122 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:123 http://piatti.debian.org squeeze/main ttf-dejavu-extra 2.31-1 [3199kB] Get:124 http://piatti.debian.org squeeze/main ttf-dejavu 2.31-1 [29.3kB] Get:125 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 56.1MB in 1s (47.7MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 8013 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 8014 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8022 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8022 files and directories currently installed.) Preparing to replace libxau6 1:1.0.3-3 (using .../libxau6_1%3a1.0.6-1_amd64.deb) ... Unpacking replacement libxau6 ... Preparing to replace libxdmcp6 1:1.0.2-3 (using .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ... Unpacking replacement libxdmcp6 ... Preparing to replace libx11-6 2:1.1.5-2 (using .../libx11-6_2%3a1.3.3-4_amd64.deb) ... Unpacking replacement libx11-6 ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8022 files and directories currently installed.) Removing libxcb-xlib0 ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8015 files and directories currently installed.) Preparing to replace libxcb1 1.1-1.2 (using .../libxcb1_1.6-1_amd64.deb) ... Unpacking replacement libxcb1 ... Preparing to replace libx11-data 2:1.1.5-2 (using .../libx11-data_2%3a1.3.3-4_all.deb) ... Unpacking replacement libx11-data ... Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 8025 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 8035 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8077 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.7_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.7) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 8083 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8090 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 8086 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8098 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8098 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8121 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 8147 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8169 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8169 files and directories currently installed.) Preparing to replace perl-modules 5.10.0-19lenny2 (using .../perl-modules_5.10.1-17_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8275 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8278 files and directories currently installed.) Preparing to replace perl 5.10.0-19lenny2 (using .../perl_5.10.1-17_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-17_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8344 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8344 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8345 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8345 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8345 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8360 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8364 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8364 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 8364 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8368 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8374 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8371 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8371 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8372 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8375 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8377 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8377 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Jan 13 14:11:17 UTC 2011. Universal Time is now: Thu Jan 13 14:11:17 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8380 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8384 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8385 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 8388 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8417 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110113T1411.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8418 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8436 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8439 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8441 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8443 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8443 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8449 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8446 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8446 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8447 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8447 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8444 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8444 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8444 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8445 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8396 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8396 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 8396 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8409 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8409 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8410 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8418 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8418 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8462 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8462 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8462 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8463 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8463 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8480 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8480 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 8479 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace libnewt0.52 0.52.2-11.3+lenny1 (using .../libnewt0.52_0.52.11-1_amd64.deb) ... Unpacking replacement libnewt0.52 ... Preparing to replace libpopt0 1.14-4 (using .../libpopt0_1.16-1_amd64.deb) ... Unpacking replacement libpopt0 ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace whiptail 0.52.2-11.3+lenny1 (using .../whiptail_0.52.11-1_amd64.deb) ... Unpacking replacement whiptail ... Preparing to replace file 4.26-1 (using .../archives/file_5.04-5_amd64.deb) ... Unpacking replacement file ... Preparing to replace libmagic1 4.26-1 (using .../libmagic1_5.04-5_amd64.deb) ... Unpacking replacement libmagic1 ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace defoma 0.11.10-0.2 (using .../defoma_0.11.11_all.deb) ... Unpacking replacement defoma ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libexpat1 2.0.1-4+lenny3 (using .../libexpat1_2.0.1-7_amd64.deb) ... Unpacking replacement libexpat1 ... Preparing to replace libfreetype6 2.3.7-2+lenny4 (using .../libfreetype6_2.4.2-2.1_amd64.deb) ... Unpacking replacement libfreetype6 ... Preparing to replace ttf-dejavu-core 2.25-3 (using .../ttf-dejavu-core_2.31-1_all.deb) ... Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-core.hints ... Unpacking replacement ttf-dejavu-core ... Preparing to replace libfontconfig1 2.6.0-3 (using .../libfontconfig1_2.8.0-2.1_amd64.deb) ... Unpacking replacement libfontconfig1 ... Preparing to replace fontconfig-config 2.6.0-3 (using .../fontconfig-config_2.8.0-2.1_all.deb) ... Unpacking replacement fontconfig-config ... Preparing to replace fontconfig 2.6.0-3 (using .../fontconfig_2.8.0-2.1_amd64.deb) ... Cleaning up font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating fontconfig cache for /usr/share/fonts/truetype/ttf-dejavu Unpacking replacement fontconfig ... Preparing to replace libaudiofile0 0.2.6-7+lenny1 (using .../libaudiofile0_0.2.6-8_amd64.deb) ... Unpacking replacement libaudiofile0 ... Preparing to replace x11-common 1:7.3+20 (using .../x11-common_1%3a7.5+8_all.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement x11-common ... dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead. Preparing to replace libice6 2:1.0.4-1 (using .../libice6_2%3a1.0.6-2_amd64.deb) ... Unpacking replacement libice6 ... Preparing to replace libsm6 2:1.0.3-2 (using .../libsm6_2%3a1.1.1-1_amd64.deb) ... Unpacking replacement libsm6 ... Preparing to replace libxt6 1:1.0.5-3 (using .../libxt6_1%3a1.0.7-1_amd64.deb) ... Unpacking replacement libxt6 ... Preparing to replace libaudio2 1.9.1-5 (using .../libaudio2_1.9.2-4_amd64.deb) ... Unpacking replacement libaudio2 ... Preparing to replace libjpeg62 6b-14 (using .../libjpeg62_6b1-1_amd64.deb) ... Unpacking replacement libjpeg62 ... Preparing to replace liblcms1 1.17.dfsg-1+lenny2 (using .../liblcms1_1.18.dfsg-1.2+b3_amd64.deb) ... Unpacking replacement liblcms1 ... Preparing to replace libmng1 1.0.9-1 (using .../libmng1_1.0.10-1+b1_amd64.deb) ... Unpacking replacement libmng1 ... Preparing to replace libpng12-0 1.2.27-2+lenny4 (using .../libpng12-0_1.2.44-1_amd64.deb) ... Unpacking replacement libpng12-0 ... Preparing to replace libxfixes3 1:4.0.3-2 (using .../libxfixes3_1%3a4.0.5-1_amd64.deb) ... Unpacking replacement libxfixes3 ... Preparing to replace libxrender1 1:0.9.4-2 (using .../libxrender1_1%3a0.9.6-1_amd64.deb) ... Unpacking replacement libxrender1 ... Preparing to replace libxcursor1 1:1.1.9-1 (using .../libxcursor1_1%3a1.1.10-2_amd64.deb) ... Unpacking replacement libxcursor1 ... Preparing to replace libxext6 2:1.0.4-2 (using .../libxext6_2%3a1.1.2-1_amd64.deb) ... Unpacking replacement libxext6 ... Preparing to replace libxft2 2.1.12-3 (using .../libxft2_2.1.14-2_amd64.deb) ... Unpacking replacement libxft2 ... Preparing to replace libxi6 2:1.1.4-1 (using .../libxi6_2%3a1.3-6_amd64.deb) ... Unpacking replacement libxi6 ... Preparing to replace libxinerama1 2:1.0.3-2 (using .../libxinerama1_2%3a1.1-3_amd64.deb) ... Unpacking replacement libxinerama1 ... Preparing to replace libxrandr2 2:1.2.3-1 (using .../libxrandr2_2%3a1.3.0-3_amd64.deb) ... Unpacking replacement libxrandr2 ... Preparing to replace libqt3-mt 3:3.3.8b-5 (using .../libqt3-mt_3%3a3.3.8b-7+b1_amd64.deb) ... Unpacking replacement libqt3-mt ... Preparing to replace libxmu6 2:1.0.4-1 (using .../libxmu6_2%3a1.0.5-2_amd64.deb) ... Unpacking replacement libxmu6 ... Preparing to replace hamfax 0.6.4-5 (using .../hamfax_0.6.4-5.1_amd64.deb) ... Unpacking replacement hamfax ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace ttf-dejavu-extra 2.25-3 (using .../ttf-dejavu-extra_2.31-1_all.deb) ... Removing obsolete conffile /etc/defoma/hints/ttf-dejavu-extra.hints ... Unpacking replacement ttf-dejavu-extra ... Preparing to replace ttf-dejavu 2.25-3 (using .../ttf-dejavu_2.31-1_all.deb) ... Unpacking replacement ttf-dejavu ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libxau6 (1:1.0.6-1) ... Setting up libxdmcp6 (1:1.0.3-2) ... Setting up libxcb1 (1.6-1) ... Setting up libx11-data (2:1.3.3-4) ... Setting up libx11-6 (2:1.3.3-4) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libnewt0.52 (0.52.11-1) ... Setting up libpopt0 (1.16-1) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up whiptail (0.52.11-1) ... Setting up libmagic1 (5.04-5) ... Setting up file (5.04-5) ... Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libudev0 (164-3) ... Setting up libexpat1 (2.0.1-7) ... Setting up libfreetype6 (2.4.2-2.1) ... Setting up ttf-dejavu-core (2.31-1) ... Setting up fontconfig-config (2.8.0-2.1) ... Installing new version of config file /etc/fonts/conf.avail/45-latin.conf ... Installing new version of config file /etc/fonts/conf.avail/60-latin.conf ... Installing new version of config file /etc/fonts/conf.avail/30-urw-aliases.conf ... Installing new version of config file /etc/fonts/conf.avail/90-synthetic.conf ... Installing new version of config file /etc/fonts/conf.avail/65-nonlatin.conf ... Installing new version of config file /etc/fonts/conf.avail/25-unhint-nonlatin.conf ... Installing new version of config file /etc/fonts/conf.avail/65-fonts-persian.conf ... Installing new version of config file /etc/fonts/conf.avail/50-user.conf ... Installing new version of config file /etc/fonts/conf.avail/30-metric-aliases.conf ... Setting up libfontconfig1 (2.8.0-2.1) ... Setting up fontconfig (2.8.0-2.1) ... Updating font configuration of fontconfig... Cleaning up category cid.. Cleaning up category truetype.. Cleaning up category type1.. Updating category type1.. Updating category truetype.. Updating category cid.. Regenerating fonts cache... done. Setting up libaudiofile0 (0.2.6-8) ... Setting up x11-common (1:7.5+8) ... Installing new version of config file /etc/X11/Xsession.d/20x11-common_process-args ... Installing new version of config file /etc/X11/Xsession.d/90x11-common_ssh-agent ... Installing new version of config file /etc/X11/Xsession.d/30x11-common_xresources ... Installing new version of config file /etc/X11/Xsession.d/50x11-common_determine-startup ... Installing new version of config file /etc/init.d/x11-common ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libice6 (2:1.0.6-2) ... Setting up libsm6 (2:1.1.1-1) ... Setting up libxt6 (1:1.0.7-1) ... Setting up libaudio2 (1.9.2-4) ... Setting up libjpeg62 (6b1-1) ... Setting up liblcms1 (1.18.dfsg-1.2+b3) ... Setting up libmng1 (1.0.10-1+b1) ... Setting up libpng12-0 (1.2.44-1) ... Setting up libxfixes3 (1:4.0.5-1) ... Setting up libxrender1 (1:0.9.6-1) ... Setting up libxcursor1 (1:1.1.10-2) ... Setting up libxext6 (2:1.1.2-1) ... Setting up libxft2 (2.1.14-2) ... Setting up libxi6 (2:1.3-6) ... Setting up libxinerama1 (2:1.1-3) ... Setting up libxrandr2 (2:1.3.0-3) ... Setting up libqt3-mt (3:3.3.8b-7+b1) ... Setting up libxmu6 (2:1.0.5-2) ... Setting up hamfax (0.6.4-5.1) ... Setting up libreadline5 (5.2-7) ... Setting up ttf-dejavu-extra (2.31-1) ... Setting up ttf-dejavu (2.31-1) ... Setting up makedev (2.3.1-89) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... Setting up perl-modules (5.10.1-17) ... Setting up dmsetup (2:1.02.48-4) ... Setting up perl (5.10.1-17) ... Setting up defoma (0.11.11) ... 1m35.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-yf', 'dist-upgrade'] 1m35.7s INFO: Running scripts pre_install 1m35.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_install_exceptions'] 1m35.7s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 1m35.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_install_exceptions'] 1m35.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-y', 'install', 'hamfax'] 1m37.2s DUMP: Reading package lists... Building dependency tree... Reading state information... hamfax is already the newest version. The following packages were automatically installed and are no longer required: libpopt0 ttf-dejavu-extra whiptail perl perl-modules libgdbm3 file ttf-dejavu libnewt0.52 libdb4.7 defoma libmagic1 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m37.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', '-y', 'install', 'hamfax'] 1m37.2s INFO: Running scripts post_distupgrade 1m37.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m37.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m37.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m37.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m37.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'clean'] 1m37.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'apt-get', 'clean'] 1m37.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m38.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m38.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--get-selections', '*'] 1m38.3s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install defoma install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install file install findutils install fontconfig install fontconfig-config install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hamfax install hostname install initscripts install insserv install libacl1 install libattr1 install libaudio2 install libaudiofile0 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.7 install libdb4.8 install libdevmapper1.02.1 install libexpat1 install libfontconfig1 install libfreetype6 install libgcc1 install libgdbm3 install libice6 install libjpeg62 install liblcms1 install liblocale-gettext-perl install liblzma2 install libmagic1 install libmng1 install libncurses5 install libncursesw5 install libnewt0.52 install libpam-modules install libpam-runtime install libpam0g install libpng12-0 install libpopt0 install libqt3-mt install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libsm6 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libx11-6 install libx11-data install libxau6 install libxcb-xlib0 deinstall libxcb1 install libxcursor1 install libxdmcp6 install libxext6 install libxfixes3 install libxft2 install libxi6 install libxinerama1 install libxmu6 install libxrandr2 install libxrender1 install libxt6 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install ttf-dejavu install ttf-dejavu-core install ttf-dejavu-extra install tzdata install ucf install util-linux install whiptail install x11-common install xz-utils install zlib1g install 1m38.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--get-selections', '*'] 1m38.3s INFO: Running scripts pre_remove 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_remove_exceptions'] 1m38.3s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 1m38.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/pre_remove_exceptions'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libaudio2'] 1m38.3s DUMP: dpkg: dependency problems prevent removal of libaudio2: libqt3-mt depends on libaudio2. dpkg: error processing libaudio2 (--remove): dependency problems - not removing Errors were encountered while processing: libaudio2 1m38.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libaudio2'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libx11-data'] 1m38.3s DUMP: dpkg: dependency problems prevent removal of libx11-data: libx11-6 depends on libx11-data. dpkg: error processing libx11-data (--remove): dependency problems - not removing Errors were encountered while processing: libx11-data 1m38.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libx11-data'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcb1'] 1m38.3s DUMP: dpkg: dependency problems prevent removal of libxcb1: libx11-6 depends on libxcb1 (>= 1.2). dpkg: error processing libxcb1 (--remove): dependency problems - not removing Errors were encountered while processing: libxcb1 1m38.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcb1'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxinerama1'] 1m38.3s DUMP: dpkg: dependency problems prevent removal of libxinerama1: libqt3-mt depends on libxinerama1. dpkg: error processing libxinerama1 (--remove): dependency problems - not removing Errors were encountered while processing: libxinerama1 1m38.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxinerama1'] 1m38.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'defoma'] 1m38.4s DUMP: (Reading database ... 8541 files and directories currently installed.) Removing defoma ... 1m38.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'defoma'] 1m38.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxext6'] 1m38.4s DUMP: dpkg: dependency problems prevent removal of libxext6: hamfax depends on libxext6. libxmu6 depends on libxext6. libxi6 depends on libxext6. libxrandr2 depends on libxext6 (>= 0). libqt3-mt depends on libxext6. libxinerama1 depends on libxext6 (>= 0). dpkg: error processing libxext6 (--remove): dependency problems - not removing Errors were encountered while processing: libxext6 1m38.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxext6'] 1m38.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libfreetype6'] 1m38.4s DUMP: dpkg: dependency problems prevent removal of libfreetype6: libxft2 depends on libfreetype6 (>= 2.2.1). libfontconfig1 depends on libfreetype6 (>= 2.2.1). libqt3-mt depends on libfreetype6 (>= 2.2.1). fontconfig depends on libfreetype6 (>= 2.2.1). dpkg: error processing libfreetype6 (--remove): dependency problems - not removing Errors were encountered while processing: libfreetype6 1m38.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libfreetype6'] 1m38.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libqt3-mt'] 1m38.4s DUMP: dpkg: dependency problems prevent removal of libqt3-mt: hamfax depends on libqt3-mt (>= 3:3.3.8b). dpkg: error processing libqt3-mt (--remove): dependency problems - not removing Errors were encountered while processing: libqt3-mt 1m38.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libqt3-mt'] 1m38.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ucf'] 1m38.5s DUMP: dpkg: dependency problems prevent removal of ucf: fontconfig-config depends on ucf (>= 0.29). dpkg: error processing ucf (--remove): dependency problems - not removing Errors were encountered while processing: ucf 1m38.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ucf'] 1m38.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libice6'] 1m38.5s DUMP: dpkg: dependency problems prevent removal of libice6: libxt6 depends on libice6 (>= 1:1.0.0). libsm6 depends on libice6 (>= 1:1.0.0). hamfax depends on libice6 (>= 1:1.0.0). libqt3-mt depends on libice6 (>= 1:1.0.0). dpkg: error processing libice6 (--remove): dependency problems - not removing Errors were encountered while processing: libice6 1m38.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libice6'] 1m38.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'file'] 1m38.5s DUMP: (Reading database ... 8447 files and directories currently installed.) Removing file ... 1m38.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'file'] 1m38.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu'] 1m38.6s DUMP: (Reading database ... 8435 files and directories currently installed.) Removing ttf-dejavu ... 1m38.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu'] 1m38.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libsm6'] 1m38.6s DUMP: dpkg: dependency problems prevent removal of libsm6: libxt6 depends on libsm6. hamfax depends on libsm6. libqt3-mt depends on libsm6. dpkg: error processing libsm6 (--remove): dependency problems - not removing Errors were encountered while processing: libsm6 1m38.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libsm6'] 1m38.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'perl-modules'] 1m38.6s DUMP: dpkg: dependency problems prevent removal of perl-modules: perl depends on perl-modules (>= 5.10.1-17). dpkg: error processing perl-modules (--remove): dependency problems - not removing Errors were encountered while processing: perl-modules 1m38.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'perl-modules'] 1m38.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxrandr2'] 1m38.6s DUMP: dpkg: dependency problems prevent removal of libxrandr2: libqt3-mt depends on libxrandr2. dpkg: error processing libxrandr2 (--remove): dependency problems - not removing Errors were encountered while processing: libxrandr2 1m38.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxrandr2'] 1m38.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libpng12-0'] 1m38.6s DUMP: dpkg: dependency problems prevent removal of libpng12-0: libqt3-mt depends on libpng12-0 (>= 1.2.13-4). dpkg: error processing libpng12-0 (--remove): dependency problems - not removing Errors were encountered while processing: libpng12-0 1m38.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libpng12-0'] 1m38.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'whiptail'] 1m38.7s DUMP: (Reading database ... 8428 files and directories currently installed.) Removing whiptail ... 1m38.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'whiptail'] 1m38.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libmng1'] 1m38.7s DUMP: dpkg: dependency problems prevent removal of libmng1: libqt3-mt depends on libmng1 (>= 1.0.10). dpkg: error processing libmng1 (--remove): dependency problems - not removing Errors were encountered while processing: libmng1 1m38.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libmng1'] 1m38.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'fontconfig'] 1m38.7s DUMP: dpkg: dependency problems prevent removal of fontconfig: libqt3-mt depends on fontconfig. dpkg: error processing fontconfig (--remove): dependency problems - not removing Errors were encountered while processing: fontconfig 1m38.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'fontconfig'] 1m38.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libnewt0.52'] 1m38.8s DUMP: (Reading database ... 8421 files and directories currently installed.) Removing libnewt0.52 ... 1m38.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libnewt0.52'] 1m38.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxi6'] 1m38.8s DUMP: dpkg: dependency problems prevent removal of libxi6: hamfax depends on libxi6. libqt3-mt depends on libxi6. dpkg: error processing libxi6 (--remove): dependency problems - not removing Errors were encountered while processing: libxi6 1m38.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxi6'] 1m38.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libgdbm3'] 1m38.8s DUMP: dpkg: dependency problems prevent removal of libgdbm3: perl depends on libgdbm3 (>= 1.8.3). dpkg: error processing libgdbm3 (--remove): dependency problems - not removing Errors were encountered while processing: libgdbm3 1m38.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libgdbm3'] 1m38.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxrender1'] 1m38.8s DUMP: dpkg: dependency problems prevent removal of libxrender1: libxcursor1 depends on libxrender1. libxft2 depends on libxrender1. libxrandr2 depends on libxrender1. libqt3-mt depends on libxrender1. dpkg: error processing libxrender1 (--remove): dependency problems - not removing Errors were encountered while processing: libxrender1 1m38.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxrender1'] 1m38.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxau6'] 1m38.9s DUMP: dpkg: dependency problems prevent removal of libxau6: libaudio2 depends on libxau6. libxcb1 depends on libxau6. dpkg: error processing libxau6 (--remove): dependency problems - not removing Errors were encountered while processing: libxau6 1m38.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxau6'] 1m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libx11-6'] 1m38.9s DUMP: dpkg: dependency problems prevent removal of libx11-6: libxt6 depends on libx11-6. libxcursor1 depends on libx11-6 (>= 0). hamfax depends on libx11-6. libxft2 depends on libx11-6 (>= 0). libxmu6 depends on libx11-6. libxfixes3 depends on libx11-6. libxi6 depends on libx11-6 (>= 2:1.2.99.901). libxrandr2 depends on libx11-6 (>= 0). libxrender1 depends on libx11-6. libxext6 depends on libx11-6. libqt3-mt depends on libx11-6. libxinerama1 depends on libx11-6 (>= 0). dpkg: error processing libx11-6 (--remove): dependency problems - not removing Errors were encountered while processing: libx11-6 1m38.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libx11-6'] 1m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libmagic1'] 1m38.9s DUMP: (Reading database ... 8338 files and directories currently installed.) Removing libmagic1 ... 1m38.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libmagic1'] 1m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxfixes3'] 1m38.9s DUMP: dpkg: dependency problems prevent removal of libxfixes3: libxcursor1 depends on libxfixes3 (>= 1:4.0.1). dpkg: error processing libxfixes3 (--remove): dependency problems - not removing Errors were encountered while processing: libxfixes3 1m38.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxfixes3'] 1m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libaudiofile0'] 1m39.0s DUMP: dpkg: dependency problems prevent removal of libaudiofile0: hamfax depends on libaudiofile0 (>= 0.2.3-4). dpkg: error processing libaudiofile0 (--remove): dependency problems - not removing Errors were encountered while processing: libaudiofile0 1m39.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libaudiofile0'] 1m39.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libjpeg62'] 1m39.0s DUMP: dpkg: dependency problems prevent removal of libjpeg62: libmng1 depends on libjpeg62 (>= 6b1). libqt3-mt depends on libjpeg62 (>= 6b1). dpkg: error processing libjpeg62 (--remove): dependency problems - not removing Errors were encountered while processing: libjpeg62 1m39.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libjpeg62'] 1m39.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxft2'] 1m39.0s DUMP: dpkg: dependency problems prevent removal of libxft2: libqt3-mt depends on libxft2 (>> 2.1.1). dpkg: error processing libxft2 (--remove): dependency problems - not removing Errors were encountered while processing: libxft2 1m39.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxft2'] 1m39.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'perl'] 1m39.0s DUMP: dpkg: dependency problems prevent removal of perl: perl-modules depends on perl (>= 5.10.1-1). dpkg: error processing perl (--remove): dependency problems - not removing Errors were encountered while processing: perl 1m39.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'perl'] 1m39.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxmu6'] 1m39.0s DUMP: dpkg: dependency problems prevent removal of libxmu6: hamfax depends on libxmu6. dpkg: error processing libxmu6 (--remove): dependency problems - not removing Errors were encountered while processing: libxmu6 1m39.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxmu6'] 1m39.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'x11-common'] 1m39.1s DUMP: dpkg: dependency problems prevent removal of x11-common: libice6 depends on x11-common. dpkg: error processing x11-common (--remove): dependency problems - not removing Errors were encountered while processing: x11-common 1m39.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'x11-common'] 1m39.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu-extra'] 1m41.2s DUMP: (Reading database ... 8323 files and directories currently installed.) Removing ttf-dejavu-extra ... Processing triggers for fontconfig ... 1m41.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu-extra'] 1m41.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu-core'] 1m41.2s DUMP: dpkg: dependency problems prevent removal of ttf-dejavu-core: fontconfig-config depends on ttf-dejavu-core | ttf-bitstream-vera | ttf-freefont | gsfonts-x11; however: Package ttf-dejavu-core is to be removed. Package ttf-bitstream-vera is not installed. Package ttf-freefont is not installed. Package gsfonts-x11 is not installed. dpkg: error processing ttf-dejavu-core (--remove): dependency problems - not removing Errors were encountered while processing: ttf-dejavu-core 1m41.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'ttf-dejavu-core'] 1m41.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcb-xlib0'] 1m41.2s DUMP: dpkg: warning: ignoring request to remove libxcb-xlib0, only the config files of which are on the system. Use --purge to remove them too. 1m41.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcb-xlib0'] 1m41.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxt6'] 1m41.2s DUMP: dpkg: dependency problems prevent removal of libxt6: hamfax depends on libxt6. libaudio2 depends on libxt6. libxmu6 depends on libxt6. libqt3-mt depends on libxt6. dpkg: error processing libxt6 (--remove): dependency problems - not removing Errors were encountered while processing: libxt6 1m41.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxt6'] 1m41.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'liblcms1'] 1m41.2s DUMP: dpkg: dependency problems prevent removal of liblcms1: libmng1 depends on liblcms1 (>= 1.15-1). dpkg: error processing liblcms1 (--remove): dependency problems - not removing Errors were encountered while processing: liblcms1 1m41.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'liblcms1'] 1m41.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libpopt0'] 1m41.3s DUMP: (Reading database ... 8298 files and directories currently installed.) Removing libpopt0 ... 1m41.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libpopt0'] 1m41.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'fontconfig-config'] 1m41.3s DUMP: dpkg: dependency problems prevent removal of fontconfig-config: libfontconfig1 depends on fontconfig-config (= 2.8.0-2.1). fontconfig depends on fontconfig-config. dpkg: error processing fontconfig-config (--remove): dependency problems - not removing Errors were encountered while processing: fontconfig-config 1m41.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'fontconfig-config'] 1m41.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libdb4.7'] 1m41.3s DUMP: dpkg: dependency problems prevent removal of libdb4.7: perl depends on libdb4.7. dpkg: error processing libdb4.7 (--remove): dependency problems - not removing Errors were encountered while processing: libdb4.7 1m41.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libdb4.7'] 1m41.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcursor1'] 1m41.3s DUMP: dpkg: dependency problems prevent removal of libxcursor1: libqt3-mt depends on libxcursor1 (>> 1.1.2). dpkg: error processing libxcursor1 (--remove): dependency problems - not removing Errors were encountered while processing: libxcursor1 1m41.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxcursor1'] 1m41.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libexpat1'] 1m41.4s DUMP: dpkg: dependency problems prevent removal of libexpat1: libfontconfig1 depends on libexpat1 (>= 1.95.8). fontconfig depends on libexpat1 (>= 1.95.8). dpkg: error processing libexpat1 (--remove): dependency problems - not removing Errors were encountered while processing: libexpat1 1m41.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libexpat1'] 1m41.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxdmcp6'] 1m41.4s DUMP: dpkg: dependency problems prevent removal of libxdmcp6: libxcb1 depends on libxdmcp6. dpkg: error processing libxdmcp6 (--remove): dependency problems - not removing Errors were encountered while processing: libxdmcp6 1m41.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libxdmcp6'] 1m41.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libfontconfig1'] 1m41.4s DUMP: dpkg: dependency problems prevent removal of libfontconfig1: libxft2 depends on libfontconfig1 (>= 2.8.0). libqt3-mt depends on libfontconfig1 (>= 2.8.0). fontconfig depends on libfontconfig1 (>= 2.8.0). dpkg: error processing libfontconfig1 (--remove): dependency problems - not removing Errors were encountered while processing: libfontconfig1 1m41.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'libfontconfig1'] 1m41.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'hamfax'] 1m41.4s DUMP: (Reading database ... 8254 files and directories currently installed.) Removing hamfax ... 1m41.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', 'hamfax'] 1m41.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m42.4s DUMP: (Reading database ... 8242 files and directories currently installed.) Removing libqt3-mt ... Removing libxrandr2 ... Removing libxi6 ... Removing libaudiofile0 ... Removing libxmu6 ... Removing libmng1 ... Removing libaudio2 ... Removing libxft2 ... Removing liblcms1 ... Removing libpng12-0 ... Removing libxcursor1 ... Removing libxt6 ... Removing libxinerama1 ... Removing fontconfig ... Removing libjpeg62 ... Removing libfontconfig1 ... Removing libxext6 ... Removing libxrender1 ... Removing libexpat1 ... Removing libxfixes3 ... Removing libx11-6 ... Removing fontconfig-config ... Removing libx11-data ... Removing libsm6 ... Removing libfreetype6 ... Removing ucf ... Removing libxcb1 ... Removing ttf-dejavu-core ... Removing libice6 ... Removing libxau6 ... Removing libxdmcp6 ... Removing x11-common ... invoke-rc.d: policy-rc.d denied execution of stop. Removing perl ... Removing libgdbm3 ... Removing perl-modules ... Removing libdb4.7 ... 1m42.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m42.4s INFO: Running scripts post_remove 1m42.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libaudio2'] 1m42.4s DUMP: dpkg: warning: ignoring request to remove libaudio2 which isn't installed. 1m42.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libaudio2'] 1m42.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libx11-data'] 1m42.4s DUMP: dpkg: warning: ignoring request to remove libx11-data which isn't installed. 1m42.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libx11-data'] 1m42.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcb1'] 1m42.5s DUMP: (Reading database ... 6338 files and directories currently installed.) Removing libxcb1 ... Purging configuration files for libxcb1 ... 1m42.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcb1'] 1m42.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxinerama1'] 1m42.5s DUMP: (Reading database ... 6338 files and directories currently installed.) Removing libxinerama1 ... Purging configuration files for libxinerama1 ... 1m42.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxinerama1'] 1m42.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'defoma'] 1m42.6s DUMP: (Reading database ... 6338 files and directories currently installed.) Removing defoma ... Purging configuration files for defoma ... dpkg: warning: while removing defoma, directory '/etc/defoma' not empty so not removed. 1m42.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'defoma'] 1m42.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxext6'] 1m42.6s DUMP: (Reading database ... 6331 files and directories currently installed.) Removing libxext6 ... Purging configuration files for libxext6 ... 1m42.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxext6'] 1m42.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libfreetype6'] 1m42.6s DUMP: (Reading database ... 6331 files and directories currently installed.) Removing libfreetype6 ... Purging configuration files for libfreetype6 ... 1m42.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libfreetype6'] 1m42.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libqt3-mt'] 1m42.7s DUMP: (Reading database ... 6331 files and directories currently installed.) Removing libqt3-mt ... Purging configuration files for libqt3-mt ... 1m42.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libqt3-mt'] 1m42.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ucf'] 1m42.9s DUMP: (Reading database ... 6331 files and directories currently installed.) Removing ucf ... Purging configuration files for ucf ... 1m42.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ucf'] 1m42.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libice6'] 1m42.9s DUMP: (Reading database ... 6329 files and directories currently installed.) Removing libice6 ... Purging configuration files for libice6 ... 1m42.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libice6'] 1m42.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'file'] 1m42.9s DUMP: (Reading database ... 6329 files and directories currently installed.) Removing file ... Purging configuration files for file ... 1m42.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'file'] 1m42.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu'] 1m42.9s DUMP: dpkg: warning: ignoring request to remove ttf-dejavu which isn't installed. 1m42.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu'] 1m42.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libsm6'] 1m43.0s DUMP: (Reading database ... 6329 files and directories currently installed.) Removing libsm6 ... Purging configuration files for libsm6 ... 1m43.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libsm6'] 1m43.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'perl-modules'] 1m43.0s DUMP: (Reading database ... 6329 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... 1m43.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'perl-modules'] 1m43.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxrandr2'] 1m43.1s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libxrandr2 ... Purging configuration files for libxrandr2 ... 1m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxrandr2'] 1m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libpng12-0'] 1m43.1s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libpng12-0 ... Purging configuration files for libpng12-0 ... 1m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libpng12-0'] 1m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'whiptail'] 1m43.1s DUMP: dpkg: warning: ignoring request to remove whiptail which isn't installed. 1m43.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'whiptail'] 1m43.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libmng1'] 1m43.2s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libmng1 ... Purging configuration files for libmng1 ... 1m43.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libmng1'] 1m43.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'fontconfig'] 1m43.2s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing fontconfig ... Purging configuration files for fontconfig ... 1m43.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'fontconfig'] 1m43.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libnewt0.52'] 1m43.2s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libnewt0.52 ... Purging configuration files for libnewt0.52 ... 1m43.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libnewt0.52'] 1m43.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxi6'] 1m43.3s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libxi6 ... Purging configuration files for libxi6 ... 1m43.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxi6'] 1m43.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libgdbm3'] 1m43.3s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libgdbm3 ... Purging configuration files for libgdbm3 ... 1m43.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libgdbm3'] 1m43.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxrender1'] 1m43.4s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libxrender1 ... Purging configuration files for libxrender1 ... 1m43.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxrender1'] 1m43.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxau6'] 1m43.4s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libxau6 ... Purging configuration files for libxau6 ... 1m43.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxau6'] 1m43.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libx11-6'] 1m43.4s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libx11-6 ... Purging configuration files for libx11-6 ... 1m43.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libx11-6'] 1m43.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libmagic1'] 1m43.5s DUMP: (Reading database ... 6326 files and directories currently installed.) Removing libmagic1 ... Purging configuration files for libmagic1 ... 1m43.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libmagic1'] 1m43.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxfixes3'] 1m43.5s DUMP: (Reading database ... 6324 files and directories currently installed.) Removing libxfixes3 ... Purging configuration files for libxfixes3 ... 1m43.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxfixes3'] 1m43.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libaudiofile0'] 1m43.6s DUMP: (Reading database ... 6324 files and directories currently installed.) Removing libaudiofile0 ... Purging configuration files for libaudiofile0 ... 1m43.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libaudiofile0'] 1m43.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libjpeg62'] 1m43.6s DUMP: dpkg: warning: ignoring request to remove libjpeg62 which isn't installed. 1m43.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libjpeg62'] 1m43.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxft2'] 1m43.6s DUMP: (Reading database ... 6324 files and directories currently installed.) Removing libxft2 ... Purging configuration files for libxft2 ... 1m43.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxft2'] 1m43.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'perl'] 1m43.6s DUMP: dpkg: warning: ignoring request to remove perl which isn't installed. 1m43.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'perl'] 1m43.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxmu6'] 1m43.7s DUMP: (Reading database ... 6324 files and directories currently installed.) Removing libxmu6 ... Purging configuration files for libxmu6 ... 1m43.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxmu6'] 1m43.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'x11-common'] 1m43.9s DUMP: (Reading database ... 6324 files and directories currently installed.) Removing x11-common ... Purging configuration files for x11-common ... 1m43.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'x11-common'] 1m43.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu-extra'] 1m43.9s DUMP: dpkg: warning: ignoring request to remove ttf-dejavu-extra which isn't installed. 1m43.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu-extra'] 1m43.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu-core'] 1m43.9s DUMP: dpkg: warning: ignoring request to remove ttf-dejavu-core which isn't installed. 1m43.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'ttf-dejavu-core'] 1m43.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcb-xlib0'] 1m44.0s DUMP: (Reading database ... 6307 files and directories currently installed.) Removing libxcb-xlib0 ... Purging configuration files for libxcb-xlib0 ... 1m44.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcb-xlib0'] 1m44.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxt6'] 1m44.0s DUMP: (Reading database ... 6307 files and directories currently installed.) Removing libxt6 ... Purging configuration files for libxt6 ... 1m44.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxt6'] 1m44.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'liblcms1'] 1m44.1s DUMP: (Reading database ... 6307 files and directories currently installed.) Removing liblcms1 ... Purging configuration files for liblcms1 ... 1m44.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'liblcms1'] 1m44.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libpopt0'] 1m44.1s DUMP: (Reading database ... 6307 files and directories currently installed.) Removing libpopt0 ... Purging configuration files for libpopt0 ... 1m44.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libpopt0'] 1m44.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'fontconfig-config'] 1m44.3s DUMP: (Reading database ... 6307 files and directories currently installed.) Removing fontconfig-config ... Purging configuration files for fontconfig-config ... 1m44.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'fontconfig-config'] 1m44.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libdb4.7'] 1m44.3s DUMP: dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. 1m44.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libdb4.7'] 1m44.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcursor1'] 1m44.3s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing libxcursor1 ... Purging configuration files for libxcursor1 ... 1m44.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxcursor1'] 1m44.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libexpat1'] 1m44.3s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing libexpat1 ... Purging configuration files for libexpat1 ... 1m44.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libexpat1'] 1m44.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxdmcp6'] 1m44.4s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... 1m44.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libxdmcp6'] 1m44.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libfontconfig1'] 1m44.4s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing libfontconfig1 ... Purging configuration files for libfontconfig1 ... 1m44.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'libfontconfig1'] 1m44.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m44.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m44.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'hamfax'] 1m44.5s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing hamfax ... Purging configuration files for hamfax ... 1m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', 'hamfax'] 1m44.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m44.5s INFO: Running scripts post_purge 1m44.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/post_purge_exceptions'] 1m44.5s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 1m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'tmp/scripts/post_purge_exceptions'] 1m44.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', '--pending'] 1m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--purge', '--pending'] 1m44.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'dpkg', '--remove', '--pending'] 1m45.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m45.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc'] 1m45.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'umount', '/proc'] 1m45.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB9Y7Dc', 'umount', '/proc'] 1m46.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpB9Y7Dc 1m46.2s INFO: PASS: Upgrading between Debian distributions. 1m46.2s INFO: PASS: All tests. 1m46.2s INFO: piuparts run ends. End: 2011-01-13 14:12:05 UTC