Start: 2011-12-09 08:40:57 UTC Package: jless Priority: extra Section: text Installed-Size: 304 Maintainer: Tatsuki Sugiura Architecture: amd64 Version: 382-iso262-2 Depends: libc6 (>= 2.3.4), libncurses5 (>= 5.7+20100313), debianutils (>= 1.8) Filename: pool/main/j/jless/jless_382-iso262-2_amd64.deb Size: 134562 MD5sum: 164311d3577c8baf0f0f01e2f019ebad SHA1: 714737b05cf502e2d7a0ac89efd86ce7c91d9a4b SHA256: b3ce460ed4dde5ff024deca77278f3f12319a1a1c1b4599ce62aaca78ea5d44c Description: A file pager program, similar to more(1) supporting ISO2022 Jless is a program similar to more (1), but which allows backward movement in the file as well as forward movement. Also, jless does not have to read the entire input file before starting, so with large input files it starts up faster than text editors like vi (1). Jless uses terminfo, so it can run on a variety of terminals. There is even limited support for hardcopy terminals. . Jless supported ISO 2022 code extension techniques and Japanese codes. Tag: culture::japanese, interface::text-mode, role::program, scope::utility, uitoolkit::ncurses, use::viewing, works-with::text Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --dpkg-noforce-unsafe-io --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ jless Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.42~201112071006~0.41-188-g3892707 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --dpkg-noforce-unsafe-io --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ jless 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Thu Nov 3 03:41:26 UTC 2011 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpvZw9je 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpvZw9je 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpvZw9je', '-zxf', 'lenny.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpvZw9je', '-zxf', 'lenny.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', '-yf', 'upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', '-yf', 'upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmpvZw9je/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpvZw9je to squeeze 0m2.1s INFO: Running scripts pre_distupgrade 0m2.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'update'] 0m8.3s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [87.3kB] Get:3 http://piatti.debian.org squeeze/main Packages [8603kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8880kB in 5s (1753kB/s) Reading package lists... 0m8.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'update'] 0m8.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', '-yf', 'dist-upgrade'] 0m29.7s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.3MB of archives. After this operation, 12.6MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze3 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-10 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-10 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.11 [2396kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze2 [1058kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2011k-0squeeze1 [630kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:75 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:76 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.3MB in 0s (47.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5915 files and directories currently installed.) Preparing to replace base-files 5lenny10 (using .../base-files_6.0squeeze3_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze3) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5917 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-10_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.2-10_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-10) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-10) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5918 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5926 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5926 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5936 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.11_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5984 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5991 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5987 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5999 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5999 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6022 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6048 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6070 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6070 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny3 (using .../perl-base_5.10.1-17squeeze2_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6118 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6118 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6136 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6140 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6144 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6147 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6147 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6148 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6153 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6153 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2011k-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2011k-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Dec 9 08:41:18 UTC 2011. Universal Time is now: Fri Dec 9 08:41:18 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6156 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6160 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6161 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6164 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6193 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20111209T0841.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6212 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6215 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6219 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6219 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6225 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6222 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6222 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6223 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6223 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6220 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6221 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6172 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6185 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6256 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6256 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6255 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m29.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', '-yf', 'dist-upgrade'] 0m29.7s INFO: apt-cache does not know about any of the requested packages 0m29.7s INFO: Running scripts post_distupgrade 0m29.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpvZw9je'] 0m30.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpvZw9je'] 0m30.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpvZw9je'] 0m30.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpvZw9je'] 0m30.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'clean'] 0m30.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'apt-get', 'clean'] 0m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'dpkg', '--get-selections', '*'] 0m31.0s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'dpkg', '--get-selections', '*'] 0m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'dpkg-divert', '--list'] 0m31.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'dpkg-divert', '--list'] 0m31.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'umount', '/proc'] 0m31.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpvZw9je', 'umount', '/proc'] 0m31.4s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpvZw9je 0m31.4s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m31.4s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp0TitCq 0m31.4s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmp0TitCq 0m31.4s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp0TitCq', '-zxf', 'lenny.tar.gz'] 0m33.0s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp0TitCq', '-zxf', 'lenny.tar.gz'] 0m33.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'mount', '-t', 'proc', 'proc', '/proc'] 0m33.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'mount', '-t', 'proc', 'proc', '/proc'] 0m33.1s DEBUG: Created policy-rc.d and chmodded it. 0m33.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'update'] 0m33.1s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m33.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'update'] 0m33.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-yf', 'upgrade'] 0m33.5s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m33.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-yf', 'upgrade'] 0m33.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmp0TitCq/tmp/scripts/ 0m33.5s INFO: Running scripts post_setup 0m33.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 0m33.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 0m33.7s INFO: Running scripts pre_test 0m33.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_test_root_password'] 0m33.7s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m33.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_test_root_password'] 0m33.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-cache', 'show', 'jless'] 0m33.8s DUMP: Package: jless Priority: extra Section: text Installed-Size: 304 Maintainer: Tatsuki Sugiura Architecture: amd64 Version: 382-iso262-1 Depends: libc6 (>= 2.3.5-1), libncurses5 (>= 5.4-5), debianutils (>= 1.8) Filename: pool/main/j/jless/jless_382-iso262-1_amd64.deb Size: 130884 MD5sum: 0a87407731a7498a049d342a0dfb895a SHA1: d5b7ddd379838b6181f7d754ed3aab365ee168c9 SHA256: d8c033f29eb866149ffefdbc1ffe6942e6ec7d1ee7ced0ffb7eb2f3c74324407 Description: A file pager program, similar to more(1) supporting ISO2022 Jless is a program similar to more (1), but which allows backward movement in the file as well as forward movement. Also, jless does not have to read the entire input file before starting, so with large input files it starts up faster than text editors like vi (1). Jless uses terminfo, so it can run on a variety of terminals. There is even limited support for hardcopy terminals. . Jless supported ISO 2022 code extension techniques and Japanese codes. Tag: culture::japanese, interface::text-mode, role::program, scope::utility, uitoolkit::ncurses, use::viewing, works-with::text 0m33.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-cache', 'show', 'jless'] 0m33.8s INFO: apt-cache knows about the following packages: jless 0m33.8s INFO: Running scripts pre_install 0m33.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_install_exceptions'] 0m33.8s DUMP: Debug: running script tmp/scripts/pre_install_exceptions 0m33.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_install_exceptions'] 0m33.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-y', 'install', 'jless'] 0m37.0s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: jless 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 131kB of archives. After this operation, 311kB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main jless 382-iso262-1 [131kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 131kB in 0s (4658kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package jless. (Reading database ... 5915 files and directories currently installed.) Unpacking jless (from .../jless_382-iso262-1_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up jless (382-iso262-1) ... 0m37.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-y', 'install', 'jless'] 0m37.0s INFO: Running scripts post_install 0m37.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 0m37.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 0m37.3s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp0TitCq to squeeze 0m37.3s INFO: Running scripts pre_distupgrade 0m37.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'update'] 0m39.5s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [87.3kB] Get:3 http://piatti.debian.org squeeze/main Packages [8603kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8880kB in 0s (9830kB/s) Reading package lists... 0m39.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'update'] 0m39.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-yf', 'dist-upgrade'] 1m0.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts jless libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 68 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.4MB of archives. After this operation, 12.6MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze3 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-10 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-10 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.11 [2396kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze2 [1058kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2011k-0squeeze1 [630kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:75 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:76 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main jless 382-iso262-2 [135kB] Get:81 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.4MB in 0s (47.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5929 files and directories currently installed.) Preparing to replace base-files 5lenny10 (using .../base-files_6.0squeeze3_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze3) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5931 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-10_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.2-10_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-10) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-10) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5932 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5940 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5940 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5950 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5992 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.11_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5998 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6005 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6001 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6036 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6062 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6084 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6084 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny3 (using .../perl-base_5.10.1-17squeeze2_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6133 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6133 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6133 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6150 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6154 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6154 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6154 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6158 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6161 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6161 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6162 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6165 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6167 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6167 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2011k-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2011k-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Dec 9 08:41:49 UTC 2011. Universal Time is now: Fri Dec 9 08:41:49 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6170 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6174 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6175 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6178 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6207 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20111209T0841.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6208 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6226 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6229 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6231 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6233 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6233 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6236 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6236 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6237 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6237 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6186 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6200 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6208 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6208 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6252 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6252 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6252 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6270 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6270 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6269 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace jless 382-iso262-1 (using .../jless_382-iso262-2_amd64.deb) ... Unpacking replacement jless ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libreadline5 (5.2-7) ... Setting up jless (382-iso262-2) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m0.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-yf', 'dist-upgrade'] 1m0.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-cache', 'show', 'jless'] 1m1.9s DUMP: Package: jless Priority: extra Section: text Installed-Size: 304 Maintainer: Tatsuki Sugiura Architecture: amd64 Version: 382-iso262-2 Depends: libc6 (>= 2.3.4), libncurses5 (>= 5.7+20100313), debianutils (>= 1.8) Filename: pool/main/j/jless/jless_382-iso262-2_amd64.deb Size: 134562 MD5sum: 164311d3577c8baf0f0f01e2f019ebad SHA1: 714737b05cf502e2d7a0ac89efd86ce7c91d9a4b SHA256: b3ce460ed4dde5ff024deca77278f3f12319a1a1c1b4599ce62aaca78ea5d44c Description: A file pager program, similar to more(1) supporting ISO2022 Jless is a program similar to more (1), but which allows backward movement in the file as well as forward movement. Also, jless does not have to read the entire input file before starting, so with large input files it starts up faster than text editors like vi (1). Jless uses terminfo, so it can run on a variety of terminals. There is even limited support for hardcopy terminals. . Jless supported ISO 2022 code extension techniques and Japanese codes. Tag: culture::japanese, interface::text-mode, role::program, scope::utility, uitoolkit::ncurses, use::viewing, works-with::text 1m1.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-cache', 'show', 'jless'] 1m1.9s INFO: apt-cache knows about the following packages: jless 1m1.9s INFO: Running scripts pre_install 1m1.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_install_exceptions'] 1m1.9s DUMP: Debug: running script tmp/scripts/pre_install_exceptions 1m1.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_install_exceptions'] 1m1.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-y', 'install', 'jless'] 1m2.3s DUMP: Reading package lists... Building dependency tree... Reading state information... jless is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m2.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', '-y', 'install', 'jless'] 1m2.3s INFO: Running scripts post_install 1m2.3s INFO: Running scripts post_distupgrade 1m2.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m2.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m2.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m2.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m2.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m3.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--get-selections', '*'] 1m3.2s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install jless install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 1m3.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--get-selections', '*'] 1m3.2s INFO: Running scripts pre_remove 1m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_remove_exceptions'] 1m3.2s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 1m3.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/pre_remove_exceptions'] 1m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'remove', 'jless'] 1m3.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: jless 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 311 kB disk space will be freed. (Reading database ... 6306 files and directories currently installed.) Removing jless ... 1m3.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'remove', 'jless'] 1m3.7s INFO: Running scripts post_remove 1m3.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--purge', 'jless'] 1m3.7s DUMP: dpkg: warning: ignoring request to remove jless which isn't installed. 1m3.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--purge', 'jless'] 1m3.7s INFO: Running scripts post_purge 1m3.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/post_purge_exceptions'] 1m3.8s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'tmp/scripts/post_purge_exceptions'] 1m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--purge', '--pending'] 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--purge', '--pending'] 1m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--remove', '--pending'] 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg', '--remove', '--pending'] 1m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'clean'] 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'clean'] 1m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg-divert', '--list'] 1m3.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'dpkg-divert', '--list'] 1m3.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'clean'] 1m3.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'apt-get', 'clean'] 1m4.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m5.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp0TitCq'] 1m5.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'umount', '/proc'] 1m5.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp0TitCq', 'umount', '/proc'] 1m5.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp0TitCq 1m5.5s INFO: PASS: Upgrading between Debian distributions. 1m5.5s INFO: PASS: All tests. 1m5.5s INFO: piuparts run ends. End: 2011-12-09 08:42:03 UTC