Start: 2013-03-20 13:44:22 UTC [lenny] Package: libcsound64-5.1 Priority: optional Section: libs Installed-Size: 2752 Maintainer: Felipe Sateler Architecture: amd64 Source: csound Version: 1:5.08.0.dfsg2-8+lenny2 Depends: libasound2 (>> 1.0.16), libc6 (>= 2.7-1), libfluidsynth1, libgcc1 (>= 1:4.1.1), libjack0 (>= 0.109.2), liblo0ldbl (>= 0.23), libpng12-0 (>= 1.2.13-4), libportaudio2, libportmidi0, libsndfile1, libstdc++6 (>= 4.1.1), python2.5 (>= 2.5) Recommends: csound Conflicts: csound (<< 1:5.07.0.dfsg-1) Filename: pool/main/c/csound/libcsound64-5.1_5.08.0.dfsg2-8+lenny2_amd64.deb Size: 1091030 MD5sum: 6048dd8876b19b3e09810b337c192b33 SHA1: 9919766189fbe32fa056573452a906455c2d0967 SHA256: 1f1a7a9ca42fe94f2877fefa7b4802b659acb49df2ff6a00a03b934257977a7e Description: main library for Csound This package contains the library which provides most of the Csound functionality. This library was built using 64-bit precision for the calculations (this doesn't mean you need a 64-bit processor). . For more information on Csound, see the csound package. Homepage: http://www.csounds.com [squeeze] Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt libcsound64-5.1=None Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201303170106~0.50-6-g5bed611 starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'libcsound64-5.1=None' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpY3XUfj 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpY3XUfj 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpY3XUfj', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m9.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpY3XUfj', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m9.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'mount', '-t', 'proc', 'proc', '/proc'] 0m9.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'mount', '-t', 'proc', 'proc', '/proc'] 0m9.6s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m9.6s DEBUG: Created policy-rc.d and chmodded it. 0m9.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'update'] 0m9.9s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m9.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'update'] 0m9.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', '-yf', 'dist-upgrade'] 0m10.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m10.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', '-yf', 'dist-upgrade'] 0m10.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpY3XUfj/tmp/scripts/ 0m10.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpY3XUfj/tmp/scripts/ 0m10.3s INFO: Running scripts post_setup 0m10.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_experimental'] 0m10.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_experimental'] 0m10.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_forbid_home'] 0m10.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_forbid_home'] 0m10.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m18.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (705kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m18.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m18.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpY3XUfj to squeeze 0m18.0s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m18.0s INFO: Running scripts pre_distupgrade 0m18.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/pre_distupgrade_exceptions'] 0m18.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/pre_distupgrade_exceptions'] 0m18.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m18.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m18.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'update'] 0m21.9s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.1MB/s) Reading package lists... 0m21.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'update'] 0m21.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', '-yf', 'dist-upgrade'] 0m57.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (43.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Mar 20 13:45:07 UTC 2013. Universal Time is now: Wed Mar 20 13:45:07 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130320T1345.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m57.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', '-yf', 'dist-upgrade'] 0m57.3s INFO: Running scripts post_distupgrade 0m57.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_exceptions'] 0m57.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_exceptions'] 0m57.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_experimental'] 0m57.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_experimental'] 0m57.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m57.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m57.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m57.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m57.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m57.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m57.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m57.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m57.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'clean'] 0m57.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'apt-get', 'clean'] 0m58.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'dpkg', '--get-selections', '*'] 0m58.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m58.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'dpkg', '--get-selections', '*'] 0m58.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'dpkg-divert', '--list'] 0m58.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m58.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'dpkg-divert', '--list'] 0m58.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'umount', '/proc'] 0m58.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpY3XUfj', 'umount', '/proc'] 0m58.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m59.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpY3XUfj'] 0m59.0s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpY3XUfj 0m59.0s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m59.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp9uKq1Y 0m59.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmp9uKq1Y 0m59.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m7.9s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m7.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'mount', '-t', 'proc', 'proc', '/proc'] 1m7.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'mount', '-t', 'proc', 'proc', '/proc'] 1m7.9s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 1m7.9s DEBUG: Created policy-rc.d and chmodded it. 1m7.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'update'] 1m8.3s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 1m8.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'update'] 1m8.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-yf', 'dist-upgrade'] 1m8.6s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m8.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-yf', 'dist-upgrade'] 1m8.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmp9uKq1Y/tmp/scripts/ 1m8.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmp9uKq1Y/tmp/scripts/ 1m8.6s INFO: Running scripts post_setup 1m8.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_experimental'] 1m8.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_experimental'] 1m8.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_forbid_home'] 1m8.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_forbid_home'] 1m8.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m13.5s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (635kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m13.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m13.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 1m13.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 1m13.8s INFO: Running scripts pre_test 1m13.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_test_root_password'] 1m13.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m13.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_test_root_password'] 1m13.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'show', 'libcsound64-5.1'] 1m16.0s DUMP: Package: libcsound64-5.1 Priority: optional Section: libs Installed-Size: 2752 Maintainer: Felipe Sateler Architecture: amd64 Source: csound Version: 1:5.08.0.dfsg2-8+lenny2 Depends: libasound2 (>> 1.0.16), libc6 (>= 2.7-1), libfluidsynth1, libgcc1 (>= 1:4.1.1), libjack0 (>= 0.109.2), liblo0ldbl (>= 0.23), libpng12-0 (>= 1.2.13-4), libportaudio2, libportmidi0, libsndfile1, libstdc++6 (>= 4.1.1), python2.5 (>= 2.5) Recommends: csound Conflicts: csound (<< 1:5.07.0.dfsg-1) Filename: pool/main/c/csound/libcsound64-5.1_5.08.0.dfsg2-8+lenny2_amd64.deb Size: 1091030 MD5sum: 6048dd8876b19b3e09810b337c192b33 SHA1: 9919766189fbe32fa056573452a906455c2d0967 SHA256: 1f1a7a9ca42fe94f2877fefa7b4802b659acb49df2ff6a00a03b934257977a7e Description: main library for Csound This package contains the library which provides most of the Csound functionality. This library was built using 64-bit precision for the calculations (this doesn't mean you need a 64-bit processor). . For more information on Csound, see the csound package. Homepage: http://www.csounds.com 1m16.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'show', 'libcsound64-5.1'] 1m16.0s INFO: apt-cache knows about the following packages: libcsound64-5.1 1m16.0s INFO: Running scripts pre_install 1m16.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_install_exceptions'] 1m17.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_install_exceptions'] 1m17.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m17.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m17.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'policy'] 1m17.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m17.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'policy'] 1m17.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'policy', 'libcsound64-5.1'] 1m17.2s DUMP: libcsound64-5.1: Installed: (none) Candidate: 1:5.08.0.dfsg2-8+lenny2 Version table: 1:5.08.0.dfsg2-8+lenny2 0 500 http://archive.debian.org lenny/main Packages 1m17.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'policy', 'libcsound64-5.1'] 1m17.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-y', 'install', 'libcsound64-5.1'] 1m26.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: ladcca2 libasound2 libavc1394-0 libdb4.5 libflac8 libfluidsynth1 libfreebob0 libiec61883-0 libjack0 liblo0ldbl libncursesw5 libogg0 libpng12-0 libportaudio2 libportmidi0 libraw1394-8 libsndfile1 libsqlite3-0 libssl0.9.8 libxml2 mime-support python2.5 python2.5-minimal Suggested packages: libasound2-plugins jackd liblo0-dev libraw1394-doc python2.5-doc python-profiler binfmt-support Recommended packages: csound libgpm2 xml-core file The following NEW packages will be installed: ladcca2 libasound2 libavc1394-0 libcsound64-5.1 libdb4.5 libflac8 libfluidsynth1 libfreebob0 libiec61883-0 libjack0 liblo0ldbl libncursesw5 libogg0 libpng12-0 libportaudio2 libportmidi0 libraw1394-8 libsndfile1 libsqlite3-0 libssl0.9.8 libxml2 mime-support python2.5 python2.5-minimal 0 upgraded, 24 newly installed, 0 to remove and 0 not upgraded. Need to get 10.1MB of archives. After this operation, 30.2MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libncursesw5 5.7+20081213-1 [375kB] Get:2 http://archive.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny16 [981kB] Get:3 http://archive.debian.org lenny/main libdb4.5 4.5.20-13 [555kB] Get:4 http://archive.debian.org lenny/main libsqlite3-0 3.5.9-6 [253kB] Get:5 http://archive.debian.org lenny/main libxml2 2.6.32.dfsg-5+lenny5 [861kB] Get:6 http://archive.debian.org lenny/main mime-support 3.44-1 [33.3kB] Get:7 http://archive.debian.org lenny/main python2.5-minimal 2.5.2-15+lenny1 [1287kB] Get:8 http://archive.debian.org lenny/main python2.5 2.5.2-15+lenny1 [3039kB] Get:9 http://archive.debian.org lenny/main ladcca2 0.4.0-6 [22.7kB] Get:10 http://archive.debian.org lenny/main libasound2 1.0.16-2 [397kB] Get:11 http://archive.debian.org lenny/main libraw1394-8 1.3.0-4 [27.5kB] Get:12 http://archive.debian.org lenny/main libavc1394-0 0.5.3-1+b1 [22.0kB] Get:13 http://archive.debian.org lenny/main libiec61883-0 1.1.0-2 [32.4kB] Get:14 http://archive.debian.org lenny/main libfreebob0 1.0.7-1 [162kB] Get:15 http://archive.debian.org lenny/main libjack0 0.109.2-5 [125kB] Get:16 http://archive.debian.org lenny/main libfluidsynth1 1.0.8-1.1 [166kB] Get:17 http://archive.debian.org lenny/main liblo0ldbl 0.23-2.2 [27.5kB] Get:18 http://archive.debian.org lenny/main libpng12-0 1.2.27-2+lenny5 [168kB] Get:19 http://archive.debian.org lenny/main libportaudio2 19+svn20071022-3 [60.9kB] Get:20 http://archive.debian.org lenny/main libportmidi0 20041117-1 [16.6kB] Get:21 http://archive.debian.org lenny/main libogg0 1.1.3-4 [15.0kB] Get:22 http://archive.debian.org lenny/main libflac8 1.2.1-1.2 [154kB] Get:23 http://archive.debian.org lenny/main libsndfile1 1.0.17-4+lenny3 [192kB] Get:24 http://archive.debian.org lenny/main libcsound64-5.1 1:5.08.0.dfsg2-8+lenny2 [1091kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 10.1MB in 1s (8051kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6013 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20081213-1_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny16_amd64.deb) ... Selecting previously deselected package libdb4.5. Unpacking libdb4.5 (from .../libdb4.5_4.5.20-13_amd64.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.5.9-6_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5+lenny5_amd64.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.44-1_all.deb) ... Selecting previously deselected package python2.5-minimal. Unpacking python2.5-minimal (from .../python2.5-minimal_2.5.2-15+lenny1_amd64.deb) ... Selecting previously deselected package python2.5. Unpacking python2.5 (from .../python2.5_2.5.2-15+lenny1_amd64.deb) ... Selecting previously deselected package ladcca2. Unpacking ladcca2 (from .../ladcca2_0.4.0-6_amd64.deb) ... Selecting previously deselected package libasound2. Unpacking libasound2 (from .../libasound2_1.0.16-2_amd64.deb) ... Selecting previously deselected package libraw1394-8. Unpacking libraw1394-8 (from .../libraw1394-8_1.3.0-4_amd64.deb) ... Selecting previously deselected package libavc1394-0. Unpacking libavc1394-0 (from .../libavc1394-0_0.5.3-1+b1_amd64.deb) ... Selecting previously deselected package libiec61883-0. Unpacking libiec61883-0 (from .../libiec61883-0_1.1.0-2_amd64.deb) ... Selecting previously deselected package libfreebob0. Unpacking libfreebob0 (from .../libfreebob0_1.0.7-1_amd64.deb) ... Selecting previously deselected package libjack0. Unpacking libjack0 (from .../libjack0_0.109.2-5_amd64.deb) ... Selecting previously deselected package libfluidsynth1. Unpacking libfluidsynth1 (from .../libfluidsynth1_1.0.8-1.1_amd64.deb) ... Selecting previously deselected package liblo0ldbl. Unpacking liblo0ldbl (from .../liblo0ldbl_0.23-2.2_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.27-2+lenny5_amd64.deb) ... Selecting previously deselected package libportaudio2. Unpacking libportaudio2 (from .../libportaudio2_19+svn20071022-3_amd64.deb) ... Selecting previously deselected package libportmidi0. Unpacking libportmidi0 (from .../libportmidi0_20041117-1_amd64.deb) ... Selecting previously deselected package libogg0. Unpacking libogg0 (from .../libogg0_1.1.3-4_amd64.deb) ... Selecting previously deselected package libflac8. Unpacking libflac8 (from .../libflac8_1.2.1-1.2_amd64.deb) ... Selecting previously deselected package libsndfile1. Unpacking libsndfile1 (from .../libsndfile1_1.0.17-4+lenny3_amd64.deb) ... Selecting previously deselected package libcsound64-5.1. Unpacking libcsound64-5.1 (from .../libcsound64-5.1_1%3a5.08.0.dfsg2-8+lenny2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncursesw5 (5.7+20081213-1) ... Setting up libssl0.9.8 (0.9.8g-15+lenny16) ... Setting up libdb4.5 (4.5.20-13) ... Setting up libsqlite3-0 (3.5.9-6) ... Setting up libxml2 (2.6.32.dfsg-5+lenny5) ... Setting up mime-support (3.44-1) ... Setting up python2.5-minimal (2.5.2-15+lenny1) ... Setting up python2.5 (2.5.2-15+lenny1) ... Setting up ladcca2 (0.4.0-6) ... Setting up libasound2 (1.0.16-2) ... Setting up libraw1394-8 (1.3.0-4) ... Setting up libavc1394-0 (0.5.3-1+b1) ... Setting up libiec61883-0 (1.1.0-2) ... Setting up libfreebob0 (1.0.7-1) ... Setting up libjack0 (0.109.2-5) ... Setting up libfluidsynth1 (1.0.8-1.1) ... Setting up liblo0ldbl (0.23-2.2) ... Setting up libpng12-0 (1.2.27-2+lenny5) ... Setting up libportaudio2 (19+svn20071022-3) ... Setting up libportmidi0 (20041117-1) ... Setting up libogg0 (1.1.3-4) ... Setting up libflac8 (1.2.1-1.2) ... Setting up libsndfile1 (1.0.17-4+lenny3) ... Setting up libcsound64-5.1 (1:5.08.0.dfsg2-8+lenny2) ... 1m26.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-y', 'install', 'libcsound64-5.1'] 1m26.5s INFO: Running scripts post_install 1m26.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 1m26.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 1m26.8s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp9uKq1Y to squeeze 1m26.8s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 1m26.8s INFO: Running scripts pre_distupgrade 1m26.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_distupgrade_exceptions'] 1m26.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_distupgrade_exceptions'] 1m26.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m26.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m26.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'update'] 1m29.2s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.1MB/s) Reading package lists... 1m29.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'update'] 1m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-yf', 'dist-upgrade'] 2m10.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libasyncns0 libc-bin libcap2 libdb4.8 libdbus-1-3 libgdbm3 libglib2.0-0 libice6 liblash2 liblzma2 libpcre3 libpulse0 libraw1394-11 libreadline6 libsm6 libudev0 libvorbis0a libvorbisenc2 libwrap0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxi6 libxtst6 sensible-utils x11-common xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libasound2 libattr1 libavc1394-0 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libflac8 libfluidsynth1 libgcc1 libiec61883-0 libjack0 liblocale-gettext-perl libncurses5 libncursesw5 libogg0 libpam-modules libpam-runtime libpam0g libpng12-0 libportaudio2 libportmidi0 libreadline5 libselinux1 libsepol1 libslang2 libsndfile1 libsqlite3-0 libss2 libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 libxml2 login lsb-base makedev mawk mime-support mktemp mount ncurses-base ncurses-bin passwd perl-base procps python2.5 python2.5-minimal readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 87 upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 46.7MB of archives. After this operation, 25.4MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:75 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:76 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze14 [1002kB] Get:77 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:78 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:79 http://piatti.debian.org squeeze/main libcap2 1:2.19-3 [12.6kB] Get:80 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:81 http://piatti.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:82 http://piatti.debian.org squeeze/main libsqlite3-0 3.7.3-1 [397kB] Get:83 http://piatti.debian.org squeeze/main libxml2 2.7.8.dfsg-2+squeeze6 [873kB] Get:84 http://piatti.debian.org squeeze/main mime-support 3.48-1 [34.2kB] Get:85 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:86 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:87 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:88 http://piatti.debian.org squeeze/main libasound2 1.0.23-2.1 [421kB] Get:89 http://piatti.debian.org squeeze/main libasyncns0 0.3-1.1 [13.3kB] Get:90 http://piatti.debian.org squeeze/main libdbus-1-3 1.2.24-4+squeeze2 [146kB] Get:91 http://piatti.debian.org squeeze/main libogg0 1.2.0~dfsg-1 [17.4kB] Get:92 http://piatti.debian.org squeeze/main libflac8 1.2.1-2+b1 [153kB] Get:93 http://piatti.debian.org squeeze/main libglib2.0-0 2.24.2-1 [1122kB] Get:94 http://piatti.debian.org squeeze/main libjack0 1:0.118+svn3796-7 [52.6kB] Get:95 http://piatti.debian.org squeeze/main liblash2 0.5.4.0-2+b1 [38.9kB] Get:96 http://piatti.debian.org squeeze/main x11-common 1:7.5+8+squeeze1 [279kB] Get:97 http://piatti.debian.org squeeze/main libice6 2:1.0.6-2 [53.8kB] Get:98 http://piatti.debian.org squeeze/main libsm6 2:1.1.1-1 [25.0kB] Get:99 http://piatti.debian.org squeeze/main libvorbis0a 1.3.1-1+squeeze1 [108kB] Get:100 http://piatti.debian.org squeeze/main libvorbisenc2 1.3.1-1+squeeze1 [141kB] Get:101 http://piatti.debian.org squeeze/main libsndfile1 1.0.21-3+squeeze1 [233kB] Get:102 http://piatti.debian.org squeeze/main libwrap0 7.6.q-19 [51.2kB] Get:103 http://piatti.debian.org squeeze/main libxau6 1:1.0.6-1 [16.8kB] Get:104 http://piatti.debian.org squeeze/main libxdmcp6 1:1.0.3-2 [19.3kB] Get:105 http://piatti.debian.org squeeze/main libxcb1 1.6-1 [44.3kB] Get:106 http://piatti.debian.org squeeze/main libx11-data 2:1.3.3-4 [190kB] Get:107 http://piatti.debian.org squeeze/main libx11-6 2:1.3.3-4 [846kB] Get:108 http://piatti.debian.org squeeze/main libxext6 2:1.1.2-1 [45.3kB] Get:109 http://piatti.debian.org squeeze/main libxi6 2:1.3-7 [56.4kB] Get:110 http://piatti.debian.org squeeze/main libxtst6 2:1.1.0-3 [19.8kB] Get:111 http://piatti.debian.org squeeze/main libpulse0 0.9.21-3+squeeze1 [394kB] Get:112 http://piatti.debian.org squeeze/main libfluidsynth1 1.1.1-5 [209kB] Get:113 http://piatti.debian.org squeeze/main libraw1394-11 2.0.5-2 [54.4kB] Get:114 http://piatti.debian.org squeeze/main libiec61883-0 1.2.0-0.1 [34.3kB] Get:115 http://piatti.debian.org squeeze/main libpng12-0 1.2.44-1+squeeze4 [180kB] Get:116 http://piatti.debian.org squeeze/main libportaudio2 19+svn20071022-3.2 [60.9kB] Get:117 http://piatti.debian.org squeeze/main libportmidi0 1:184-2+squeeze1 [24.6kB] Get:118 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:119 http://piatti.debian.org squeeze/main python2.5 2.5.5-11 [3053kB] Get:120 http://piatti.debian.org squeeze/main python2.5-minimal 2.5.5-11 [1307kB] Get:121 http://piatti.debian.org squeeze/main libavc1394-0 0.5.3-1+b2 [22.4kB] Get:122 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 46.7MB in 1s (32.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7062 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 7064 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 7065 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7073 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 7073 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 7083 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7125 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 7131 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7138 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 7134 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7146 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7146 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7169 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 7195 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7217 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7217 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7265 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7265 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7266 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7266 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7266 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7283 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7287 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7287 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 7287 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7291 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7297 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7294 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7294 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7295 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7298 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7300 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7300 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Mar 20 13:46:10 UTC 2013. Universal Time is now: Wed Mar 20 13:46:10 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7306 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7310 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7311 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 7314 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7343 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130320T1346.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7344 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7362 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7365 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7367 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7369 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7369 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7375 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7372 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7372 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7373 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7373 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7370 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7370 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7370 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7371 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7322 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7322 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7322 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 7322 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7335 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7335 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7335 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7336 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7344 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7344 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7388 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7388 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7388 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7389 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7389 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7406 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7406 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 7405 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny16 (using .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Selecting previously deselected package libcap2. Unpacking libcap2 (from .../libcap2_1%3a2.19-3_amd64.deb) ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Preparing to replace libsqlite3-0 3.5.9-6 (using .../libsqlite3-0_3.7.3-1_amd64.deb) ... Unpacking replacement libsqlite3-0 ... Preparing to replace libxml2 2.6.32.dfsg-5+lenny5 (using .../libxml2_2.7.8.dfsg-2+squeeze6_amd64.deb) ... Unpacking replacement libxml2 ... Preparing to replace mime-support 3.44-1 (using .../mime-support_3.48-1_all.deb) ... Unpacking replacement mime-support ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libasound2 1.0.16-2 (using .../libasound2_1.0.23-2.1_amd64.deb) ... Unpacking replacement libasound2 ... Selecting previously deselected package libasyncns0. Unpacking libasyncns0 (from .../libasyncns0_0.3-1.1_amd64.deb) ... Selecting previously deselected package libdbus-1-3. Unpacking libdbus-1-3 (from .../libdbus-1-3_1.2.24-4+squeeze2_amd64.deb) ... Preparing to replace libogg0 1.1.3-4 (using .../libogg0_1.2.0~dfsg-1_amd64.deb) ... Unpacking replacement libogg0 ... Preparing to replace libflac8 1.2.1-1.2 (using .../libflac8_1.2.1-2+b1_amd64.deb) ... Unpacking replacement libflac8 ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Preparing to replace libjack0 0.109.2-5 (using .../libjack0_1%3a0.118+svn3796-7_amd64.deb) ... Unpacking replacement libjack0 ... Selecting previously deselected package liblash2. Unpacking liblash2 (from .../liblash2_0.5.4.0-2+b1_amd64.deb) ... Selecting previously deselected package x11-common. Unpacking x11-common (from .../x11-common_1%3a7.5+8+squeeze1_all.deb) ... Selecting previously deselected package libice6. Unpacking libice6 (from .../libice6_2%3a1.0.6-2_amd64.deb) ... Selecting previously deselected package libsm6. Unpacking libsm6 (from .../libsm6_2%3a1.1.1-1_amd64.deb) ... Selecting previously deselected package libvorbis0a. Unpacking libvorbis0a (from .../libvorbis0a_1.3.1-1+squeeze1_amd64.deb) ... Selecting previously deselected package libvorbisenc2. Unpacking libvorbisenc2 (from .../libvorbisenc2_1.3.1-1+squeeze1_amd64.deb) ... Preparing to replace libsndfile1 1.0.17-4+lenny3 (using .../libsndfile1_1.0.21-3+squeeze1_amd64.deb) ... Unpacking replacement libsndfile1 ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6.q-19_amd64.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.6-1_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.6-1_amd64.deb) ... Selecting previously deselected package libx11-data. Unpacking libx11-data (from .../libx11-data_2%3a1.3.3-4_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.3.3-4_amd64.deb) ... Selecting previously deselected package libxext6. Unpacking libxext6 (from .../libxext6_2%3a1.1.2-1_amd64.deb) ... Selecting previously deselected package libxi6. Unpacking libxi6 (from .../libxi6_2%3a1.3-7_amd64.deb) ... Selecting previously deselected package libxtst6. Unpacking libxtst6 (from .../libxtst6_2%3a1.1.0-3_amd64.deb) ... Selecting previously deselected package libpulse0. Unpacking libpulse0 (from .../libpulse0_0.9.21-3+squeeze1_amd64.deb) ... Preparing to replace libfluidsynth1 1.0.8-1.1 (using .../libfluidsynth1_1.1.1-5_amd64.deb) ... Unpacking replacement libfluidsynth1 ... Selecting previously deselected package libraw1394-11. Unpacking libraw1394-11 (from .../libraw1394-11_2.0.5-2_amd64.deb) ... Preparing to replace libiec61883-0 1.1.0-2 (using .../libiec61883-0_1.2.0-0.1_amd64.deb) ... Unpacking replacement libiec61883-0 ... Preparing to replace libpng12-0 1.2.27-2+lenny5 (using .../libpng12-0_1.2.44-1+squeeze4_amd64.deb) ... Unpacking replacement libpng12-0 ... Preparing to replace libportaudio2 19+svn20071022-3 (using .../libportaudio2_19+svn20071022-3.2_amd64.deb) ... Unpacking replacement libportaudio2 ... Preparing to replace libportmidi0 20041117-1 (using .../libportmidi0_1%3a184-2+squeeze1_amd64.deb) ... Unpacking replacement libportmidi0 ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace python2.5 2.5.2-15+lenny1 (using .../python2.5_2.5.5-11_amd64.deb) ... Unpacking replacement python2.5 ... Preparing to replace python2.5-minimal 2.5.2-15+lenny1 (using .../python2.5-minimal_2.5.5-11_amd64.deb) ... Unpacking replacement python2.5-minimal ... Preparing to replace libavc1394-0 0.5.3-1+b1 (using .../libavc1394-0_0.5.3-1+b2_amd64.deb) ... Unpacking replacement libavc1394-0 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libcap2 (1:2.19-3) ... Setting up libdb4.6 (4.6.21-16) ... Setting up libpcre3 (8.02-1.1) ... Setting up libsqlite3-0 (3.7.3-1) ... Setting up libxml2 (2.7.8.dfsg-2+squeeze6) ... Setting up mime-support (3.48-1) ... Installing new version of config file /etc/mime.types ... Setting up ucf (3.0025+nmu1) ... Setting up libasound2 (1.0.23-2.1) ... Setting up libasyncns0 (0.3-1.1) ... Setting up libdbus-1-3 (1.2.24-4+squeeze2) ... Setting up libogg0 (1.2.0~dfsg-1) ... Setting up libflac8 (1.2.1-2+b1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libjack0 (1:0.118+svn3796-7) ... Setting up liblash2 (0.5.4.0-2+b1) ... Setting up x11-common (1:7.5+8+squeeze1) ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libice6 (2:1.0.6-2) ... Setting up libsm6 (2:1.1.1-1) ... Setting up libvorbis0a (1.3.1-1+squeeze1) ... Setting up libvorbisenc2 (1.3.1-1+squeeze1) ... Setting up libsndfile1 (1.0.21-3+squeeze1) ... Setting up libwrap0 (7.6.q-19) ... Setting up libxau6 (1:1.0.6-1) ... Setting up libxdmcp6 (1:1.0.3-2) ... Setting up libxcb1 (1.6-1) ... Setting up libx11-data (2:1.3.3-4) ... Setting up libx11-6 (2:1.3.3-4) ... Setting up libxext6 (2:1.1.2-1) ... Setting up libxi6 (2:1.3-7) ... Setting up libxtst6 (2:1.1.0-3) ... Setting up libpulse0 (0.9.21-3+squeeze1) ... Setting up libfluidsynth1 (1.1.1-5) ... Setting up libraw1394-11 (2.0.5-2) ... Setting up libiec61883-0 (1.2.0-0.1) ... Setting up libpng12-0 (1.2.44-1+squeeze4) ... Setting up libportaudio2 (19+svn20071022-3.2) ... Setting up libportmidi0 (1:184-2+squeeze1) ... Setting up libreadline5 (5.2-7) ... Setting up python2.5-minimal (2.5.5-11) ... Setting up python2.5 (2.5.5-11) ... Setting up libavc1394-0 (0.5.3-1+b2) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 2m10.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', '-yf', 'dist-upgrade'] 2m10.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'show', 'libcsound64-5.1'] 2m11.8s DUMP: Package: libcsound64-5.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 2752 Maintainer: Felipe Sateler Architecture: amd64 Source: csound Version: 1:5.08.0.dfsg2-8+lenny2 Depends: libasound2 (>> 1.0.16), libc6 (>= 2.7-1), libfluidsynth1, libgcc1 (>= 1:4.1.1), libjack0 (>= 0.109.2), liblo0ldbl (>= 0.23), libpng12-0 (>= 1.2.13-4), libportaudio2, libportmidi0, libsndfile1, libstdc++6 (>= 4.1.1), python2.5 (>= 2.5) Recommends: csound Conflicts: csound (<< 1:5.07.0.dfsg-1) Description: main library for Csound This package contains the library which provides most of the Csound functionality. This library was built using 64-bit precision for the calculations (this doesn't mean you need a 64-bit processor). . For more information on Csound, see the csound package. Homepage: http://www.csounds.com 2m11.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-cache', 'show', 'libcsound64-5.1'] 2m11.8s INFO: apt-cache does not know about any of the requested packages 2m11.8s INFO: Running scripts post_distupgrade 2m11.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_exceptions'] 2m11.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_exceptions'] 2m11.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_experimental'] 2m11.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_experimental'] 2m11.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m11.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m11.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m11.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m11.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m12.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--get-selections', '*'] 2m12.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install ladcca2 install libacl1 install libasound2 install libasyncns0 install libattr1 install libavc1394-0 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcap2 install libcomerr2 install libcsound64-5.1 install libdb4.5 install libdb4.6 install libdb4.8 install libdbus-1-3 install libdevmapper1.02.1 install libflac8 install libfluidsynth1 install libfreebob0 install libgcc1 install libgdbm3 install libglib2.0-0 install libice6 install libiec61883-0 install libjack0 install liblash2 install liblo0ldbl install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libogg0 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libpng12-0 install libportaudio2 install libportmidi0 install libpulse0 install libraw1394-11 install libraw1394-8 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libsm6 install libsndfile1 install libsqlite3-0 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libvorbis0a install libvorbisenc2 install libwrap0 install libx11-6 install libx11-data install libxau6 install libxcb1 install libxdmcp6 install libxext6 install libxi6 install libxml2 install libxtst6 install login install lsb-base install lzma install makedev install mawk install mime-support install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install python2.5 install python2.5-minimal install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install x11-common install xz-utils install zlib1g install 2m12.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--get-selections', '*'] 2m13.9s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', '-ac'] 2m14.7s DUMP: debsums: no md5sums for libdb4.5 debsums: no md5sums for mawk 2m14.7s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', '-ac'] 2m14.7s INFO: Running scripts pre_remove 2m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_exceptions'] 2m14.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/pre_remove_exceptions'] 2m14.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'remove', 'libglib2.0-0', 'libx11-data', 'libxtst6', 'libxcb1', 'libxml2', 'libdbus-1-3', 'libraw1394-11', 'libice6', 'libraw1394-8', 'libasound2', 'libwrap0', 'libasyncns0', 'liblo0ldbl', 'libsm6', 'libpng12-0', 'libfreebob0', 'libvorbisenc2', 'libcap2', 'libsqlite3-0', 'libxi6', 'libssl0.9.8', 'libgdbm3', 'libxau6', 'libxext6', 'libfluidsynth1', 'libx11-6', 'libogg0', 'libsndfile1', 'libiec61883-0', 'liblash2', 'libjack0', 'libvorbis0a', 'x11-common', 'libpcre3', 'libportaudio2', 'python2.5', 'mime-support', 'libportmidi0', 'ladcca2', 'libpulse0', 'libavc1394-0', 'python2.5-minimal', 'libdb4.5', 'libflac8', 'libxdmcp6', 'libcsound64-5.1'] 2m16.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: ladcca2 libasound2 libasyncns0 libavc1394-0 libcap2 libcsound64-5.1 libdb4.5 libdbus-1-3 libflac8 libfluidsynth1 libfreebob0 libgdbm3 libglib2.0-0 libice6 libiec61883-0 libjack0 liblash2 liblo0ldbl libogg0 libpcre3 libpng12-0 libportaudio2 libportmidi0 libpulse0 libraw1394-11 libraw1394-8 libsm6 libsndfile1 libsqlite3-0 libssl0.9.8 libvorbis0a libvorbisenc2 libwrap0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxi6 libxml2 libxtst6 mime-support python2.5 python2.5-minimal x11-common 0 upgraded, 0 newly installed, 46 to remove and 0 not upgraded. After this operation, 42.7 MB disk space will be freed. (Reading database ... 7911 files and directories currently installed.) Removing ladcca2 ... Removing libcsound64-5.1 ... Removing libportmidi0 ... Removing libportaudio2 ... Removing libfluidsynth1 ... Removing libasound2 ... Removing libpulse0 ... Removing libasyncns0 ... Removing libfreebob0 ... Removing libavc1394-0 ... Removing libcap2 ... Removing libdb4.5 ... Removing libdbus-1-3 ... Removing libsndfile1 ... Removing libflac8 ... Removing libgdbm3 ... Removing libglib2.0-0 ... Removing libsm6 ... Removing libice6 ... Removing libiec61883-0 ... Removing libjack0 ... Removing liblash2 ... Removing liblo0ldbl ... Removing libvorbisenc2 ... Removing libvorbis0a ... Removing libogg0 ... Removing libpcre3 ... Removing libpng12-0 ... Removing libraw1394-11 ... Removing libraw1394-8 ... Removing python2.5 ... Removing libsqlite3-0 ... Removing libssl0.9.8 ... Removing libwrap0 ... Removing libxtst6 ... Removing libxi6 ... Removing libxext6 ... Removing libx11-6 ... Removing libx11-data ... Removing libxcb1 ... Removing libxau6 ... Removing libxdmcp6 ... Removing libxml2 ... Removing mime-support ... Removing python2.5-minimal ... Removing x11-common ... invoke-rc.d: policy-rc.d denied execution of stop. 2m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'remove', 'libglib2.0-0', 'libx11-data', 'libxtst6', 'libxcb1', 'libxml2', 'libdbus-1-3', 'libraw1394-11', 'libice6', 'libraw1394-8', 'libasound2', 'libwrap0', 'libasyncns0', 'liblo0ldbl', 'libsm6', 'libpng12-0', 'libfreebob0', 'libvorbisenc2', 'libcap2', 'libsqlite3-0', 'libxi6', 'libssl0.9.8', 'libgdbm3', 'libxau6', 'libxext6', 'libfluidsynth1', 'libx11-6', 'libogg0', 'libsndfile1', 'libiec61883-0', 'liblash2', 'libjack0', 'libvorbis0a', 'x11-common', 'libpcre3', 'libportaudio2', 'python2.5', 'mime-support', 'libportmidi0', 'ladcca2', 'libpulse0', 'libavc1394-0', 'python2.5-minimal', 'libdb4.5', 'libflac8', 'libxdmcp6', 'libcsound64-5.1'] 2m16.8s INFO: Running scripts post_remove 2m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_remove_exceptions'] 2m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_remove_exceptions'] 2m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', 'libglib2.0-0', 'libx11-data', 'libxtst6', 'libxcb1', 'libxml2', 'libdbus-1-3', 'libraw1394-11', 'libice6', 'libraw1394-8', 'libasound2', 'libwrap0', 'libasyncns0', 'liblo0ldbl', 'libsm6', 'libpng12-0', 'libfreebob0', 'libvorbisenc2', 'libcap2', 'libsqlite3-0', 'libxi6', 'libssl0.9.8', 'libgdbm3', 'libxau6', 'libxext6', 'libfluidsynth1', 'libx11-6', 'libogg0', 'libsndfile1', 'libiec61883-0', 'liblash2', 'libjack0', 'libvorbis0a', 'x11-common', 'libpcre3', 'libportaudio2', 'python2.5', 'mime-support', 'libportmidi0', 'ladcca2', 'libpulse0', 'libavc1394-0', 'python2.5-minimal', 'libdb4.5', 'libflac8', 'libxdmcp6'] 2m18.1s DUMP: (Reading database ... 6442 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... dpkg: warning: ignoring request to remove libx11-data which isn't installed. Removing libxtst6 ... Purging configuration files for libxtst6 ... Removing libxcb1 ... Purging configuration files for libxcb1 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libdbus-1-3 ... Purging configuration files for libdbus-1-3 ... Removing libraw1394-11 ... Purging configuration files for libraw1394-11 ... Removing libice6 ... Purging configuration files for libice6 ... Removing libraw1394-8 ... Purging configuration files for libraw1394-8 ... Removing libasound2 ... Purging configuration files for libasound2 ... Removing libwrap0 ... Purging configuration files for libwrap0 ... Removing libasyncns0 ... Purging configuration files for libasyncns0 ... Removing liblo0ldbl ... Purging configuration files for liblo0ldbl ... Removing libsm6 ... Purging configuration files for libsm6 ... Removing libpng12-0 ... Purging configuration files for libpng12-0 ... Removing libfreebob0 ... Purging configuration files for libfreebob0 ... Removing libvorbisenc2 ... Purging configuration files for libvorbisenc2 ... Removing libcap2 ... Purging configuration files for libcap2 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libxi6 ... Purging configuration files for libxi6 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... Removing libxau6 ... Purging configuration files for libxau6 ... Removing libxext6 ... Purging configuration files for libxext6 ... Removing libfluidsynth1 ... Purging configuration files for libfluidsynth1 ... Removing libx11-6 ... Purging configuration files for libx11-6 ... Removing libogg0 ... Purging configuration files for libogg0 ... Removing libsndfile1 ... Purging configuration files for libsndfile1 ... Removing libiec61883-0 ... Purging configuration files for libiec61883-0 ... Removing liblash2 ... Purging configuration files for liblash2 ... Removing libjack0 ... Purging configuration files for libjack0 ... Removing libvorbis0a ... Purging configuration files for libvorbis0a ... Removing x11-common ... Purging configuration files for x11-common ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libportaudio2 ... Purging configuration files for libportaudio2 ... Removing python2.5 ... Purging configuration files for python2.5 ... Removing mime-support ... Purging configuration files for mime-support ... Removing libportmidi0 ... Purging configuration files for libportmidi0 ... Removing ladcca2 ... Purging configuration files for ladcca2 ... Removing libpulse0 ... Purging configuration files for libpulse0 ... Removing libavc1394-0 ... Purging configuration files for libavc1394-0 ... Removing python2.5-minimal ... Purging configuration files for python2.5-minimal ... dpkg: warning: ignoring request to remove libdb4.5 which isn't installed. Removing libflac8 ... Purging configuration files for libflac8 ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... 2m18.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', 'libglib2.0-0', 'libx11-data', 'libxtst6', 'libxcb1', 'libxml2', 'libdbus-1-3', 'libraw1394-11', 'libice6', 'libraw1394-8', 'libasound2', 'libwrap0', 'libasyncns0', 'liblo0ldbl', 'libsm6', 'libpng12-0', 'libfreebob0', 'libvorbisenc2', 'libcap2', 'libsqlite3-0', 'libxi6', 'libssl0.9.8', 'libgdbm3', 'libxau6', 'libxext6', 'libfluidsynth1', 'libx11-6', 'libogg0', 'libsndfile1', 'libiec61883-0', 'liblash2', 'libjack0', 'libvorbis0a', 'x11-common', 'libpcre3', 'libportaudio2', 'python2.5', 'mime-support', 'libportmidi0', 'ladcca2', 'libpulse0', 'libavc1394-0', 'python2.5-minimal', 'libdb4.5', 'libflac8', 'libxdmcp6'] 2m18.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', 'libcsound64-5.1'] 2m18.2s DUMP: (Reading database ... 6419 files and directories currently installed.) Removing libcsound64-5.1 ... Purging configuration files for libcsound64-5.1 ... 2m18.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', 'libcsound64-5.1'] 2m18.2s INFO: Running scripts post_purge 2m18.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_purge_exceptions'] 2m18.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'tmp/scripts/post_purge_exceptions'] 2m18.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', '--pending'] 2m18.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--purge', '--pending'] 2m18.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--remove', '--pending'] 2m18.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg', '--remove', '--pending'] 2m18.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m18.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m18.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg-divert', '--list'] 2m18.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 2m18.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'dpkg-divert', '--list'] 2m18.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'clean'] 2m18.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'apt-get', 'clean'] 2m19.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'umount', '/proc'] 2m19.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp9uKq1Y', 'umount', '/proc'] 2m19.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m20.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp9uKq1Y'] 2m20.1s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp9uKq1Y 2m20.1s INFO: PASS: Upgrading between Debian distributions. 2m20.1s INFO: PASS: All tests. 2m20.1s INFO: piuparts run ends. ret=0 End: 2013-03-20 13:46:43 UTC