Start: 2011-01-18 03:33:12 UTC Package: libtrace-tools Priority: optional Section: net Installed-Size: 264 Maintainer: Matt Brown Architecture: amd64 Source: libtrace3 Version: 3.0.7-1 Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libpacketdump3, libstdc++6 (>= 4.1.1), libtrace3, zlib1g (>= 1:1.1.4) Filename: pool/main/libt/libtrace3/libtrace-tools_3.0.7-1_amd64.deb Size: 70740 MD5sum: daa360508c1bc6bf13fbb742b6192fdc SHA1: 7a94c68238724afb4c06b6b0a7face7a5fed42e3 SHA256: 8e3f9782a082efdd1397b1c0d402c829f66af354b912f54020665c8fb354b13e Description: helper utilities for use with the libtrace process library libtrace is a library for trace processing. These tools perform many common tasks that are required when analysing and manipulating network traces. . Multiple input methods and formats are supported including device capture, raw and gz-compressed traces, and sockets. . libtrace is developed by the WAND Network Research Group at Waikato University in New Zealand. Homepage: http://research.wand.net.nz/software/libtrace.php Tag: implemented-in::c, interface::commandline, network::scanner, role::program, scope::utility, use::converting, use::monitor Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ libtrace-tools Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.40~201101151102 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab lenny.tar.gz -d lenny -d squeeze --mirror http://piatti.debian.org/debian/ libtrace-tools 0m0.0s INFO: Running on: Linux piatti 2.6.32.28-dsa-amd64 #1 SMP Mon Jan 10 11:32:53 CET 2011 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpLRWWMH 0m0.0s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpLRWWMH 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpLRWWMH', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpLRWWMH', '-zxf', 'lenny.tar.gz'] 0m1.6s DEBUG: Created policy-rc.d and chmodded it. 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'update'] 0m1.6s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'update'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', '-yf', 'upgrade'] 0m2.0s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', '-yf', 'upgrade'] 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'clean'] 0m2.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'clean'] 0m2.0s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpLRWWMH/tmp/scripts/ 0m2.0s INFO: Running scripts post_setup 0m2.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpLRWWMH to squeeze 0m2.0s INFO: Running scripts pre_distupgrade 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'update'] 0m4.0s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8611kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.0kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8890kB in 0s (9974kB/s) Reading package lists... 0m4.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'update'] 0m4.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', '-yf', 'dist-upgrade'] 0m24.3s DUMP: Reading package lists... Building dependency tree... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 67 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.4MB of archives. After this operation, 12.8MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.8 [2391kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:75 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:79 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:80 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.4MB in 0s (46.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5894 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5896 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5897 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5905 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5905 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 5915 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5957 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.8_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.8) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 5963 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5970 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 5966 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5978 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6001 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6027 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6049 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-17_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6115 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6119 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6119 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6123 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6129 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6126 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6127 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6130 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6132 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Jan 18 03:33:27 UTC 2011. Universal Time is now: Tue Jan 18 03:33:27 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6135 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6139 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6140 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6143 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110118T0333.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6191 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6194 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6196 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6198 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6204 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6201 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6202 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6199 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6200 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6151 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6151 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6164 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6165 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6173 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6234 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libudev0 (164-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m24.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', '-yf', 'dist-upgrade'] 0m24.3s INFO: Running scripts post_distupgrade 0m24.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpLRWWMH'] 0m24.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpLRWWMH'] 0m24.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'clean'] 0m24.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'apt-get', 'clean'] 0m25.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'dpkg', '--get-selections', '*'] 0m25.3s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m25.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'dpkg', '--get-selections', '*'] 0m25.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'umount', '/proc'] 0m25.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpLRWWMH', 'umount', '/proc'] 0m25.7s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpLRWWMH 0m25.7s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpB4oNVn 0m25.7s DEBUG: Unpacking lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpB4oNVn 0m25.7s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpB4oNVn', '-zxf', 'lenny.tar.gz'] 0m27.5s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpB4oNVn', '-zxf', 'lenny.tar.gz'] 0m27.5s DEBUG: Created policy-rc.d and chmodded it. 0m27.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m27.6s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m27.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m27.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'mount', '-t', 'proc', 'proc', '/proc'] 0m27.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-yf', 'upgrade'] 0m27.9s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m27.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-yf', 'upgrade'] 0m27.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'clean'] 0m27.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'clean'] 0m27.9s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpB4oNVn/tmp/scripts/ 0m27.9s INFO: Running scripts post_setup 0m27.9s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m27.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m28.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m28.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m28.2s DUMP: Hit http://piatti.debian.org lenny Release.gpg Hit http://piatti.debian.org lenny Release Ign http://piatti.debian.org lenny/main Packages/DiffIndex Ign http://piatti.debian.org lenny/contrib Packages/DiffIndex Ign http://piatti.debian.org lenny/non-free Packages/DiffIndex Hit http://piatti.debian.org lenny/main Packages Hit http://piatti.debian.org lenny/contrib Packages Hit http://piatti.debian.org lenny/non-free Packages Reading package lists... 0m28.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m28.2s INFO: Running scripts pre_install 0m28.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_install_exceptions'] 0m28.2s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m28.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_install_exceptions'] 0m28.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-y', 'install', 'libtrace-tools'] 0m28.9s DUMP: Reading package lists... Building dependency tree... The following extra packages will be installed: libpacketdump3 libpcap0.8 libtrace3 The following NEW packages will be installed: libpacketdump3 libpcap0.8 libtrace-tools libtrace3 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 252kB of archives. After this operation, 950kB of additional disk space will be used. Get:1 http://piatti.debian.org lenny/main libpcap0.8 0.9.8-5 [100kB] Get:2 http://piatti.debian.org lenny/main libpacketdump3 3.0.4-1 [45.9kB] Get:3 http://piatti.debian.org lenny/main libtrace3 3.0.4-1 [39.3kB] Get:4 http://piatti.debian.org lenny/main libtrace-tools 3.0.4-1 [66.6kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 252kB in 0s (6961kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libpcap0.8. (Reading database ... 5894 files and directories currently installed.) Unpacking libpcap0.8 (from .../libpcap0.8_0.9.8-5_amd64.deb) ... Selecting previously deselected package libpacketdump3. Unpacking libpacketdump3 (from .../libpacketdump3_3.0.4-1_amd64.deb) ... Selecting previously deselected package libtrace3. Unpacking libtrace3 (from .../libtrace3_3.0.4-1_amd64.deb) ... Selecting previously deselected package libtrace-tools. Unpacking libtrace-tools (from .../libtrace-tools_3.0.4-1_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpcap0.8 (0.9.8-5) ... Setting up libpacketdump3 (3.0.4-1) ... Setting up libtrace3 (3.0.4-1) ... Setting up libtrace-tools (3.0.4-1) ... 0m28.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-y', 'install', 'libtrace-tools'] 0m28.9s INFO: Running scripts pre_upgrade 0m28.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_upgrade_exceptions'] 0m28.9s DUMP: Debug: running script tmp/scripts/pre_upgrade_exceptions 0m28.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_upgrade_exceptions'] 0m28.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m29.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m29.2s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpB4oNVn to squeeze 0m29.2s INFO: Running scripts pre_distupgrade 0m29.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m31.1s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [835B] Get:2 http://piatti.debian.org squeeze Release [89.9kB] Get:3 http://piatti.debian.org squeeze/main Packages [8611kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.0kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [125kB] Fetched 8890kB in 0s (10.2MB/s) Reading package lists... 0m31.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'update'] 0m31.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-yf', 'dist-upgrade'] 0m52.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpacketdump3 libpam-modules libpam-runtime libpam0g libpcap0.8 libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libtrace-tools libtrace3 libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 71 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0 [68.7kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.2-7 [746kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.2-7 [4273kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.8 [2391kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-2 [144kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17 [1066kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36 [208kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36 [164kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1 [360kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-5 [58.8kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-5 [108kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2010o-1 [764kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1 [120kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-5 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1 [70.2kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1 [73.1kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-5 [733kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-2 [817kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1 [120kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-5 [79.7kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6 [46.4kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4 [221kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28 [19.9kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10 [2164kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-2 [49.2kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1 [223kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-2 [54.3kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:74 http://piatti.debian.org squeeze/main procps 1:3.2.8-9 [249kB] Get:75 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-4 [85.3kB] Get:78 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-4 [56.6kB] Get:79 http://piatti.debian.org squeeze/main libpcap0.8 1.1.1-2 [131kB] Get:80 http://piatti.debian.org squeeze/main libpacketdump3 3.0.7-1 [53.2kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main libtrace3 3.0.7-1 [47.1kB] Get:83 http://piatti.debian.org squeeze/main libtrace-tools 3.0.7-1 [70.7kB] Get:84 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (45.3MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5983 files and directories currently installed.) Preparing to replace base-files 5lenny8 (using .../base-files_6.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 5985 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.2-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny6 (using .../libc6_2.11.2-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.2-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.2-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 5986 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 5994 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 5994 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6004 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6046 files and directories currently installed.) Preparing to replace dpkg 1.14.30 (using .../dpkg_1.15.8.8_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.8) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6052 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6059 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6055 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6067 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6067 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6090 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6116 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6138 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6138 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-17_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6186 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6187 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6187 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6187 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6204 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6208 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6208 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6208 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6212 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6215 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-5_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6215 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-5_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6219 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6221 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6221 files and directories currently installed.) Preparing to replace tzdata 2010o-0lenny1 (using .../tzdata_2010o-1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2010o-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Jan 18 03:33:54 UTC 2011. Universal Time is now: Tue Jan 18 03:33:54 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6224 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6228 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-5_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6229 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6232 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20110118T0333.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-5_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-5) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6280 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-2) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6283 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6285 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6293 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6290 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6290 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6291 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6291 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6288 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6288 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6288 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-5_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6289 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6240 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6240 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6240 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6240 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6254 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.10_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: Total number processed: 5 gpg: unchanged: 5 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6306 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6306 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6306 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6307 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6307 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libncursesw5. (Reading database ... 6323 files and directories currently installed.) Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-4_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4_amd64.deb) ... Preparing to replace libpcap0.8 0.9.8-5 (using .../libpcap0.8_1.1.1-2_amd64.deb) ... Unpacking replacement libpcap0.8 ... Preparing to replace libpacketdump3 3.0.4-1 (using .../libpacketdump3_3.0.7-1_amd64.deb) ... Unpacking replacement libpacketdump3 ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace libtrace3 3.0.4-1 (using .../libtrace3_3.0.7-1_amd64.deb) ... Unpacking replacement libtrace3 ... Preparing to replace libtrace-tools 3.0.4-1 (using .../libtrace-tools_3.0.7-1_amd64.deb) ... Unpacking replacement libtrace-tools ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up procps (1:3.2.8-9) ... Installing new version of config file /etc/sysctl.conf ... Installing new version of config file /etc/init.d/procps ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libudev0 (164-3) ... Setting up libpcap0.8 (1.1.1-2) ... Setting up libpacketdump3 (3.0.7-1) ... Setting up libreadline5 (5.2-7) ... Setting up libtrace3 (3.0.7-1) ... Setting up libtrace-tools (3.0.7-1) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-4) ... Setting up libdevmapper1.02.1 (2:1.02.48-4) ... 0m52.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-yf', 'dist-upgrade'] 0m52.5s INFO: Running scripts pre_install 0m52.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_install_exceptions'] 0m52.5s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m52.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_install_exceptions'] 0m52.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-y', 'install', 'libtrace-tools'] 0m54.0s DUMP: Reading package lists... Building dependency tree... Reading state information... libtrace-tools is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', '-y', 'install', 'libtrace-tools'] 0m54.0s INFO: Running scripts post_distupgrade 0m54.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'clean'] 0m54.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'apt-get', 'clean'] 0m54.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--get-selections', '*'] 0m54.8s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpacketdump3 install libpam-modules install libpam-runtime install libpam0g install libpcap0.8 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtrace-tools install libtrace3 install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m54.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--get-selections', '*'] 0m54.8s INFO: Running scripts pre_remove 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_remove_exceptions'] 0m54.8s DUMP: Debug: running script tmp/scripts/pre_remove_exceptions 0m54.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/pre_remove_exceptions'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libpacketdump3'] 0m54.8s DUMP: dpkg: dependency problems prevent removal of libpacketdump3: libtrace-tools depends on libpacketdump3. dpkg: error processing libpacketdump3 (--remove): dependency problems - not removing Errors were encountered while processing: libpacketdump3 0m54.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libpacketdump3'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libtrace3'] 0m54.8s DUMP: dpkg: dependency problems prevent removal of libtrace3: libtrace-tools depends on libtrace3. dpkg: error processing libtrace3 (--remove): dependency problems - not removing Errors were encountered while processing: libtrace3 0m54.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libtrace3'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libpcap0.8'] 0m54.8s DUMP: dpkg: dependency problems prevent removal of libpcap0.8: libpacketdump3 depends on libpcap0.8 (>= 0.9.8). libtrace3 depends on libpcap0.8 (>= 0.9.8). dpkg: error processing libpcap0.8 (--remove): dependency problems - not removing Errors were encountered while processing: libpcap0.8 0m54.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libpcap0.8'] 0m54.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libtrace-tools'] 0m54.9s DUMP: (Reading database ... 6369 files and directories currently installed.) Removing libtrace-tools ... 0m54.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', 'libtrace-tools'] 0m54.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.0s DUMP: (Reading database ... 6341 files and directories currently installed.) Removing libtrace3 ... Removing libpacketdump3 ... Removing libpcap0.8 ... 0m55.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.0s INFO: Running scripts post_remove 0m55.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libpacketdump3'] 0m55.0s DUMP: (Reading database ... 6271 files and directories currently installed.) Removing libpacketdump3 ... Purging configuration files for libpacketdump3 ... 0m55.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libpacketdump3'] 0m55.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libtrace3'] 0m55.0s DUMP: (Reading database ... 6271 files and directories currently installed.) Removing libtrace3 ... Purging configuration files for libtrace3 ... 0m55.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libtrace3'] 0m55.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libpcap0.8'] 0m55.1s DUMP: (Reading database ... 6271 files and directories currently installed.) Removing libpcap0.8 ... Purging configuration files for libpcap0.8 ... 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libpcap0.8'] 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libtrace-tools'] 0m55.1s DUMP: dpkg: warning: ignoring request to remove libtrace-tools which isn't installed. 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', 'libtrace-tools'] 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.1s INFO: Running scripts post_purge 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/post_purge_exceptions'] 0m55.1s DUMP: Debug: running script tmp/scripts/post_purge_exceptions 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'tmp/scripts/post_purge_exceptions'] 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', '--pending'] 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--purge', '--pending'] 0m55.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m55.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'dpkg', '--remove', '--pending'] 0m56.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m56.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpB4oNVn'] 0m56.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'umount', '/proc'] 0m56.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpB4oNVn', 'umount', '/proc'] 0m56.8s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpB4oNVn 0m56.8s INFO: PASS: Upgrading between Debian distributions. 0m56.8s INFO: PASS: All tests. 0m56.8s INFO: piuparts run ends. End: 2011-01-18 03:34:09 UTC