Start: 2013-04-13 17:47:53 UTC [lenny] Package: libzeroc-ice32-dbg Priority: extra Section: libdevel Installed-Size: 153572 Maintainer: Francisco Moya Architecture: amd64 Source: zeroc-ice Version: 3.2.1-8 Depends: libfreeze32 (= 3.2.1-8), libglacier2-32 (= 3.2.1-8), libicebox32 (= 3.2.1-8), libicegrid32 (= 3.2.1-8), libicepatch2-32 (= 3.2.1-8), libicessl32 (= 3.2.1-8), libicestorm32 (= 3.2.1-8), libiceutil32 (= 3.2.1-8), libicexml32 (= 3.2.1-8), libslice32 (= 3.2.1-8), libzeroc-ice32 (= 3.2.1-8) Filename: pool/main/z/zeroc-ice/libzeroc-ice32-dbg_3.2.1-8_amd64.deb Size: 30327346 MD5sum: ee615625cf5cc58c6b09ff1167435201 SHA1: fc317d7d626a289b21826e82601dabf8814add8a SHA256: c4be944e315448ab645a0a5ebff9d79486ab83b936d946cede5c476dc0b5a73a Description: Ice for C++ debugging symbols Ice, the Internet Communications Engine, is a middleware for the practical programmer developed by ZeroC Inc. A high-performance Internet communications platform, Ice includes a wealth of layered services and plug-ins. . Ice is built on concepts which will be familiar to CORBA programmers, and supports a wide variety of programming languages and runtime platforms. . This package provides debugging information useful when developing Ice applications. You will find further information in the ZeroC home page (http://www.zeroc.com/ice.html) and in the non-free package zeroc-ice-manual. Homepage: http://www.zeroc.com/ [squeeze] Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-debsums-errors --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt libzeroc-ice32-dbg=None Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201304071036~0.50-24-gfd6cabe starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-debsums-errors' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'libzeroc-ice32-dbg=None' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp_7ewDt 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmp_7ewDt 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp_7ewDt', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m25.8s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp_7ewDt', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m25.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'mount', '-t', 'proc', 'proc', '/proc'] 0m25.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'mount', '-t', 'proc', 'proc', '/proc'] 0m25.8s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m25.8s DEBUG: Created policy-rc.d and chmodded it. 0m25.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'update'] 0m27.4s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m27.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'update'] 0m27.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', '-yf', 'dist-upgrade'] 0m27.7s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', '-yf', 'dist-upgrade'] 0m27.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmp_7ewDt/tmp/scripts/ 0m27.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmp_7ewDt/tmp/scripts/ 0m27.7s INFO: Running scripts post_setup 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_experimental'] 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_experimental'] 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_forbid_home'] 0m27.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_forbid_home'] 0m27.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m30.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 1s (132kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m30.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m30.7s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp_7ewDt to squeeze 0m30.7s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m30.7s INFO: Running scripts pre_distupgrade 0m30.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/pre_distupgrade_exceptions'] 0m30.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/pre_distupgrade_exceptions'] 0m30.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m30.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m30.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'update'] 0m42.8s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.1MB/s) Reading package lists... 0m42.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'update'] 0m42.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', '-yf', 'dist-upgrade'] 1m24.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (47.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Apr 13 17:49:01 UTC 2013. Universal Time is now: Sat Apr 13 17:49:01 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130413T1749.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', '-yf', 'dist-upgrade'] 1m24.2s INFO: Running scripts post_distupgrade 1m24.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_exceptions'] 1m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_exceptions'] 1m24.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_experimental'] 1m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_experimental'] 1m24.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m24.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m24.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m24.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m24.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m24.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m24.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m24.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'clean'] 1m24.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'apt-get', 'clean'] 1m25.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'dpkg', '--get-selections', '*'] 1m25.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m25.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'dpkg', '--get-selections', '*'] 1m25.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'dpkg-divert', '--list'] 1m25.4s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m25.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'dpkg-divert', '--list'] 1m25.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'umount', '/proc'] 1m25.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp_7ewDt', 'umount', '/proc'] 1m25.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m26.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp_7ewDt'] 1m26.0s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp_7ewDt 1m26.0s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m26.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmphKMEib 1m26.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmphKMEib 1m26.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmphKMEib', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m28.7s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmphKMEib', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m28.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'mount', '-t', 'proc', 'proc', '/proc'] 1m28.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'mount', '-t', 'proc', 'proc', '/proc'] 1m28.7s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 1m28.7s DEBUG: Created policy-rc.d and chmodded it. 1m28.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'update'] 1m29.3s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 1m29.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'update'] 1m29.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-yf', 'dist-upgrade'] 1m29.6s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m29.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-yf', 'dist-upgrade'] 1m29.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmphKMEib/tmp/scripts/ 1m29.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmphKMEib/tmp/scripts/ 1m29.6s INFO: Running scripts post_setup 1m29.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_experimental'] 1m29.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_experimental'] 1m29.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_forbid_home'] 1m29.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_forbid_home'] 1m29.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m54.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (532kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m54.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m54.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 1m54.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 1m54.4s INFO: Running scripts pre_test 1m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_test_root_password'] 1m54.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m54.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_test_root_password'] 1m54.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'show', 'libzeroc-ice32-dbg'] 1m55.6s DUMP: Package: libzeroc-ice32-dbg Priority: extra Section: libdevel Installed-Size: 153572 Maintainer: Francisco Moya Architecture: amd64 Source: zeroc-ice Version: 3.2.1-8 Depends: libfreeze32 (= 3.2.1-8), libglacier2-32 (= 3.2.1-8), libicebox32 (= 3.2.1-8), libicegrid32 (= 3.2.1-8), libicepatch2-32 (= 3.2.1-8), libicessl32 (= 3.2.1-8), libicestorm32 (= 3.2.1-8), libiceutil32 (= 3.2.1-8), libicexml32 (= 3.2.1-8), libslice32 (= 3.2.1-8), libzeroc-ice32 (= 3.2.1-8) Filename: pool/main/z/zeroc-ice/libzeroc-ice32-dbg_3.2.1-8_amd64.deb Size: 30327346 MD5sum: ee615625cf5cc58c6b09ff1167435201 SHA1: fc317d7d626a289b21826e82601dabf8814add8a SHA256: c4be944e315448ab645a0a5ebff9d79486ab83b936d946cede5c476dc0b5a73a Description: Ice for C++ debugging symbols Ice, the Internet Communications Engine, is a middleware for the practical programmer developed by ZeroC Inc. A high-performance Internet communications platform, Ice includes a wealth of layered services and plug-ins. . Ice is built on concepts which will be familiar to CORBA programmers, and supports a wide variety of programming languages and runtime platforms. . This package provides debugging information useful when developing Ice applications. You will find further information in the ZeroC home page (http://www.zeroc.com/ice.html) and in the non-free package zeroc-ice-manual. Homepage: http://www.zeroc.com/ 1m55.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'show', 'libzeroc-ice32-dbg'] 1m55.6s INFO: apt-cache knows about the following packages: libzeroc-ice32-dbg 1m55.6s INFO: Running scripts pre_install 1m55.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_install_exceptions'] 1m55.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_install_exceptions'] 1m55.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m55.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m55.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'policy'] 1m55.9s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m55.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'policy'] 1m55.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'policy', 'libzeroc-ice32-dbg'] 1m55.9s DUMP: libzeroc-ice32-dbg: Installed: (none) Candidate: 3.2.1-8 Version table: 3.2.1-8 0 500 http://archive.debian.org lenny/main Packages 1m55.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'policy', 'libzeroc-ice32-dbg'] 1m55.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-y', 'install', 'libzeroc-ice32-dbg'] 2m45.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libdb4.5++ libexpat1 libfreeze32 libglacier2-32 libicebox32 libicegrid32 libicepatch2-32 libicessl32 libicestorm32 libiceutil32 libicexml32 libslice32 libssl0.9.8 libzeroc-ice32 The following NEW packages will be installed: libdb4.5++ libexpat1 libfreeze32 libglacier2-32 libicebox32 libicegrid32 libicepatch2-32 libicessl32 libicestorm32 libiceutil32 libicexml32 libslice32 libssl0.9.8 libzeroc-ice32 libzeroc-ice32-dbg 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8MB of archives. After this operation, 175MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny16 [981kB] Get:2 http://archive.debian.org lenny/main libdb4.5++ 4.5.20-13 [590kB] Get:3 http://archive.debian.org lenny/main libexpat1 2.0.1-4+lenny3 [137kB] Get:4 http://archive.debian.org lenny/main libiceutil32 3.2.1-8 [157kB] Get:5 http://archive.debian.org lenny/main libzeroc-ice32 3.2.1-8 [933kB] Get:6 http://archive.debian.org lenny/main libfreeze32 3.2.1-8 [299kB] Get:7 http://archive.debian.org lenny/main libglacier2-32 3.2.1-8 [198kB] Get:8 http://archive.debian.org lenny/main libicebox32 3.2.1-8 [98.3kB] Get:9 http://archive.debian.org lenny/main libicegrid32 3.2.1-8 [661kB] Get:10 http://archive.debian.org lenny/main libicepatch2-32 3.2.1-8 [198kB] Get:11 http://archive.debian.org lenny/main libicessl32 3.2.1-8 [185kB] Get:12 http://archive.debian.org lenny/main libicestorm32 3.2.1-8 [399kB] Get:13 http://archive.debian.org lenny/main libicexml32 3.2.1-8 [71.3kB] Get:14 http://archive.debian.org lenny/main libslice32 3.2.1-8 [549kB] Get:15 http://archive.debian.org lenny/main libzeroc-ice32-dbg 3.2.1-8 [30.3MB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.8MB in 6s (5572kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libssl0.9.8. (Reading database ... 6013 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny16_amd64.deb) ... Selecting previously deselected package libdb4.5++. Unpacking libdb4.5++ (from .../libdb4.5++_4.5.20-13_amd64.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4+lenny3_amd64.deb) ... Selecting previously deselected package libiceutil32. Unpacking libiceutil32 (from .../libiceutil32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libzeroc-ice32. Unpacking libzeroc-ice32 (from .../libzeroc-ice32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libfreeze32. Unpacking libfreeze32 (from .../libfreeze32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libglacier2-32. Unpacking libglacier2-32 (from .../libglacier2-32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicebox32. Unpacking libicebox32 (from .../libicebox32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicegrid32. Unpacking libicegrid32 (from .../libicegrid32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicepatch2-32. Unpacking libicepatch2-32 (from .../libicepatch2-32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicessl32. Unpacking libicessl32 (from .../libicessl32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicestorm32. Unpacking libicestorm32 (from .../libicestorm32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libicexml32. Unpacking libicexml32 (from .../libicexml32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libslice32. Unpacking libslice32 (from .../libslice32_3.2.1-8_amd64.deb) ... Selecting previously deselected package libzeroc-ice32-dbg. Unpacking libzeroc-ice32-dbg (from .../libzeroc-ice32-dbg_3.2.1-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libssl0.9.8 (0.9.8g-15+lenny16) ... Setting up libdb4.5++ (4.5.20-13) ... Setting up libexpat1 (2.0.1-4+lenny3) ... Setting up libiceutil32 (3.2.1-8) ... Setting up libzeroc-ice32 (3.2.1-8) ... Setting up libfreeze32 (3.2.1-8) ... Setting up libglacier2-32 (3.2.1-8) ... Setting up libicebox32 (3.2.1-8) ... Setting up libicegrid32 (3.2.1-8) ... Setting up libicepatch2-32 (3.2.1-8) ... Setting up libicessl32 (3.2.1-8) ... Setting up libicestorm32 (3.2.1-8) ... Setting up libicexml32 (3.2.1-8) ... Setting up libslice32 (3.2.1-8) ... Setting up libzeroc-ice32-dbg (3.2.1-8) ... 2m45.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-y', 'install', 'libzeroc-ice32-dbg'] 2m45.3s INFO: Running scripts post_install 2m45.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 2m45.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 2m45.5s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmphKMEib to squeeze 2m45.5s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 2m45.5s INFO: Running scripts pre_distupgrade 2m45.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_distupgrade_exceptions'] 2m45.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_distupgrade_exceptions'] 2m45.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 2m45.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 2m45.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'update'] 2m57.4s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (9917kB/s) Reading package lists... 2m57.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'update'] 2m57.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-yf', 'dist-upgrade'] 3m41.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libexpat1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 71 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze14 [1002kB] Get:76 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:77 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:78 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:79 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:80 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:81 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:82 http://piatti.debian.org squeeze/main libexpat1 2.0.1-7+squeeze1 [138kB] Get:83 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:84 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.8MB in 0s (47.2MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6165 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6167 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6168 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6176 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6176 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6186 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6228 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6234 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6241 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6237 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6272 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6298 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6368 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6368 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6369 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6369 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6369 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6386 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6390 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6390 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6390 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6394 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6400 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6397 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6397 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6398 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6401 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6403 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6403 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Apr 13 17:51:19 UTC 2013. Universal Time is now: Sat Apr 13 17:51:19 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6409 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6413 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6414 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6417 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6446 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130413T1751.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6447 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6465 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6468 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6470 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6472 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6472 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6478 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6475 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6475 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6476 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6476 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6473 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6473 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6473 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6474 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6425 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6425 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6425 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6425 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6438 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6438 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6438 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6439 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6447 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6447 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6492 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6492 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6509 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6509 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6508 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny16 (using .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libexpat1 2.0.1-4+lenny3 (using .../libexpat1_2.0.1-7+squeeze1_amd64.deb) ... Unpacking replacement libexpat1 ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libexpat1 (2.0.1-7+squeeze1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 3m41.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', '-yf', 'dist-upgrade'] 3m41.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'show', 'libzeroc-ice32-dbg'] 3m48.4s DUMP: Package: libzeroc-ice32-dbg Status: install ok installed Priority: extra Section: libdevel Installed-Size: 153572 Maintainer: Francisco Moya Architecture: amd64 Source: zeroc-ice Version: 3.2.1-8 Depends: libfreeze32 (= 3.2.1-8), libglacier2-32 (= 3.2.1-8), libicebox32 (= 3.2.1-8), libicegrid32 (= 3.2.1-8), libicepatch2-32 (= 3.2.1-8), libicessl32 (= 3.2.1-8), libicestorm32 (= 3.2.1-8), libiceutil32 (= 3.2.1-8), libicexml32 (= 3.2.1-8), libslice32 (= 3.2.1-8), libzeroc-ice32 (= 3.2.1-8) Description: Ice for C++ debugging symbols Ice, the Internet Communications Engine, is a middleware for the practical programmer developed by ZeroC Inc. A high-performance Internet communications platform, Ice includes a wealth of layered services and plug-ins. . Ice is built on concepts which will be familiar to CORBA programmers, and supports a wide variety of programming languages and runtime platforms. . This package provides debugging information useful when developing Ice applications. You will find further information in the ZeroC home page (http://www.zeroc.com/ice.html) and in the non-free package zeroc-ice-manual. Homepage: http://www.zeroc.com/ 3m48.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-cache', 'show', 'libzeroc-ice32-dbg'] 3m48.4s INFO: apt-cache does not know about any of the requested packages 3m48.4s INFO: Running scripts post_distupgrade 3m48.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_exceptions'] 3m48.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_exceptions'] 3m48.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_experimental'] 3m48.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_experimental'] 3m48.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m48.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m48.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m48.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m48.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m48.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m48.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m49.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m49.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m49.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m49.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--get-selections', '*'] 3m49.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.5++ install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libexpat1 install libfreeze32 install libgcc1 install libglacier2-32 install libicebox32 install libicegrid32 install libicepatch2-32 install libicessl32 install libicestorm32 install libiceutil32 install libicexml32 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libslice32 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libzeroc-ice32 install libzeroc-ice32-dbg install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 3m49.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--get-selections', '*'] 3m50.1s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmphKMEib', '-ac'] 3m51.4s DUMP: debsums: no md5sums for libdb4.5++ debsums: no md5sums for mawk 3m51.4s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmphKMEib', '-ac'] 3m51.4s INFO: Running scripts pre_remove 3m51.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m51.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m51.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m51.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m51.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m51.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m51.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_exceptions'] 3m51.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/pre_remove_exceptions'] 3m51.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'remove', 'libzeroc-ice32', 'libicegrid32', 'libiceutil32', 'libslice32', 'libicexml32', 'libfreeze32', 'libdb4.5++', 'libicepatch2-32', 'libssl0.9.8', 'libglacier2-32', 'libicestorm32', 'libexpat1', 'libicessl32', 'libicebox32', 'libzeroc-ice32-dbg'] 3m52.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdb4.5++ libexpat1 libfreeze32 libglacier2-32 libicebox32 libicegrid32 libicepatch2-32 libicessl32 libicestorm32 libiceutil32 libicexml32 libslice32 libssl0.9.8 libzeroc-ice32 libzeroc-ice32-dbg 0 upgraded, 0 newly installed, 15 to remove and 0 not upgraded. After this operation, 175 MB disk space will be freed. (Reading database ... 6571 files and directories currently installed.) Removing libzeroc-ice32-dbg ... Removing libicestorm32 ... Removing libfreeze32 ... Removing libdb4.5++ ... Removing libicexml32 ... Removing libexpat1 ... Removing libicegrid32 ... Removing libglacier2-32 ... Removing libicebox32 ... Removing libicepatch2-32 ... Removing libicessl32 ... Removing libslice32 ... Removing libzeroc-ice32 ... Removing libiceutil32 ... Removing libssl0.9.8 ... 3m52.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'remove', 'libzeroc-ice32', 'libicegrid32', 'libiceutil32', 'libslice32', 'libicexml32', 'libfreeze32', 'libdb4.5++', 'libicepatch2-32', 'libssl0.9.8', 'libglacier2-32', 'libicestorm32', 'libexpat1', 'libicessl32', 'libicebox32', 'libzeroc-ice32-dbg'] 3m52.9s INFO: Running scripts post_remove 3m52.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_remove_exceptions'] 3m52.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_remove_exceptions'] 3m52.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', 'libzeroc-ice32', 'libicegrid32', 'libiceutil32', 'libslice32', 'libicexml32', 'libfreeze32', 'libdb4.5++', 'libicepatch2-32', 'libssl0.9.8', 'libglacier2-32', 'libicestorm32', 'libexpat1', 'libicessl32', 'libicebox32'] 3m53.6s DUMP: (Reading database ... 6418 files and directories currently installed.) Removing libzeroc-ice32 ... Purging configuration files for libzeroc-ice32 ... Removing libicegrid32 ... Purging configuration files for libicegrid32 ... Removing libiceutil32 ... Purging configuration files for libiceutil32 ... Removing libslice32 ... Purging configuration files for libslice32 ... Removing libicexml32 ... Purging configuration files for libicexml32 ... Removing libfreeze32 ... Purging configuration files for libfreeze32 ... dpkg: warning: ignoring request to remove libdb4.5++ which isn't installed. Removing libicepatch2-32 ... Purging configuration files for libicepatch2-32 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libglacier2-32 ... Purging configuration files for libglacier2-32 ... Removing libicestorm32 ... Purging configuration files for libicestorm32 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing libicessl32 ... Purging configuration files for libicessl32 ... Removing libicebox32 ... Purging configuration files for libicebox32 ... 3m53.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', 'libzeroc-ice32', 'libicegrid32', 'libiceutil32', 'libslice32', 'libicexml32', 'libfreeze32', 'libdb4.5++', 'libicepatch2-32', 'libssl0.9.8', 'libglacier2-32', 'libicestorm32', 'libexpat1', 'libicessl32', 'libicebox32'] 3m53.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', 'libzeroc-ice32-dbg'] 3m53.6s DUMP: dpkg: warning: ignoring request to remove libzeroc-ice32-dbg which isn't installed. 3m53.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', 'libzeroc-ice32-dbg'] 3m53.6s INFO: Running scripts post_purge 3m53.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_purge_exceptions'] 3m53.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'tmp/scripts/post_purge_exceptions'] 3m53.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', '--pending'] 3m53.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--purge', '--pending'] 3m53.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--remove', '--pending'] 3m53.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg', '--remove', '--pending'] 3m53.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m54.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg-divert', '--list'] 3m54.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 3m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'dpkg-divert', '--list'] 3m54.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'clean'] 3m54.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'apt-get', 'clean'] 3m55.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'umount', '/proc'] 3m55.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmphKMEib', 'umount', '/proc'] 3m55.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m55.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmphKMEib'] 3m55.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmphKMEib 3m55.6s INFO: PASS: Upgrading between Debian distributions. 3m55.6s INFO: PASS: All tests. 3m55.6s INFO: piuparts run ends. ret=0 End: 2013-04-13 17:51:49 UTC