Start: 2013-05-23 12:38:53 UTC [lenny] Package: nut-snmp Priority: optional Section: admin Installed-Size: 112 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.2.2-6.5 Depends: libc6 (>= 2.7-1), libsnmp15 (>= 5.4.1~dfsg), libssl0.9.8 (>= 0.9.8f-5), nut (>= 1.4.1-pre1) Conflicts: nut (<= 1.4.0) Filename: pool/main/n/nut/nut-snmp_2.2.2-6.5_amd64.deb Size: 54212 MD5sum: 513d4a6c614dff9556ab1b8c6864b92e SHA1: 356e407a4ad4a450d7c14a6e6903e3b4537c9ea7 SHA256: 902da526048168e83eab4c212dd1eb5a403392e8b8c677067ecab1214a9b4c5e Description: A meta SNMP Driver subsystem for the nut - Network UPS Tools nut is a client/server uninterruptible power supply (UPS) monitoring system that permits the sharing of one (or more) UPS between several machines. The 'server' monitors the UPS and notifies the 'clients' when the UPS is on or has a low battery. . This package contains snmp-ups, the Meta SNMP UPS Driver, which support different MIBS (IETF, MGE, APC) for Network UPS Tools. It adds an SNMP Manager interface to the core system. You probably don't need it if you don't understand what this is all about. Homepage: http://www.networkupstools.org Tag: admin::monitoring, hardware::power, hardware::power:ups, protocol::snmp, role::plugin [squeeze] Package: nut-snmp Priority: optional Section: admin Installed-Size: 152 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.4.3-1.1squeeze2 Depends: libc6 (>= 2.4), libsnmp15 (>= 5.4.3~dfsg), nut (>= 1.4.1-pre1) Conflicts: nut (<= 1.4.0) Filename: pool/main/n/nut/nut-snmp_2.4.3-1.1squeeze2_amd64.deb Size: 67890 MD5sum: f23e570929c98344b05284a60413ff20 SHA1: 90793b36bb632f108c7cc09f54008abae6ab1c11 SHA256: a29d8cc2f0f3e9943df69794d9d4e165906627ea6495d04fdfe9feef22868c16 Description: network UPS tools - SNMP driver Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. . This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which supports various MIBs including IETF, MGE, and APC. It adds an SNMP Manager interface to the core NUT system. Homepage: http://www.networkupstools.org Tag: admin::monitoring, hardware::power, hardware::power:ups, protocol::snmp, role::plugin Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.6/dist-packages:/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://mirror.bm.debian.org/debian/ --tmpdir /srv/piuparts.debian.org/tmp -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt nut-snmp=2.4.3-1.1squeeze2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.52~201305230910~0.51-38-g36d46ff starting up. 0m0.0s INFO: Command line arguments: '/srv/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--no-eatmydata' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://mirror.bm.debian.org/debian/' '--tmpdir' '/srv/piuparts.debian.org/tmp' '-b' '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'nut-snmp=2.4.3-1.1squeeze2' 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpRxj7Gp 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpRxj7Gp 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.6s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.6s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m1.6s DEBUG: Created policy-rc.d and chmodded it. 0m1.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'update'] 0m1.7s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'update'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpRxj7Gp/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpRxj7Gp/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (1742kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpRxj7Gp to squeeze 0m3.1s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main deb http://mirror.bm.debian.org/debian/ squeeze contrib deb http://mirror.bm.debian.org/debian/ squeeze non-free 0m3.1s INFO: Running scripts pre_distupgrade 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/pre_distupgrade_exceptions'] 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/pre_distupgrade_exceptions'] 0m3.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m3.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'update'] 0m5.1s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672B] Get:2 http://mirror.bm.debian.org squeeze Release [99.8kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8602kB] Get:4 http://mirror.bm.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://mirror.bm.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 1s (7621kB/s) Reading package lists... 0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'update'] 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', '-yf', 'dist-upgrade'] 0m24.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (50.0MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu May 23 12:39:08 UTC 2013. Universal Time is now: Thu May 23 12:39:08 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130523T1239.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m24.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', '-yf', 'dist-upgrade'] 0m24.9s INFO: Running scripts post_distupgrade 0m24.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_exceptions'] 0m24.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_exceptions'] 0m24.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_experimental'] 0m24.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_experimental'] 0m24.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m24.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m24.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m25.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m25.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m25.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m25.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m25.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m25.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m25.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m25.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'clean'] 0m25.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'apt-get', 'clean'] 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'dpkg', '--get-selections', '*'] 0m26.2s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'dpkg', '--get-selections', '*'] 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'dpkg-divert', '--list'] 0m26.2s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'dpkg-divert', '--list'] 0m26.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'umount', '/proc'] 0m26.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp', 'umount', '/proc'] 0m26.6s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m26.7s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpRxj7Gp'] 0m26.7s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpRxj7Gp 0m26.7s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m26.7s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp2tf7aP 0m26.7s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp2tf7aP 0m26.7s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m28.2s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m28.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'mount', '-t', 'proc', 'proc', '/proc'] 0m28.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'mount', '-t', 'proc', 'proc', '/proc'] 0m28.2s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m28.2s DEBUG: Created policy-rc.d and chmodded it. 0m28.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'update'] 0m28.3s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m28.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'update'] 0m28.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-yf', 'dist-upgrade'] 0m28.7s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m28.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-yf', 'dist-upgrade'] 0m28.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp2tf7aP/tmp/scripts/ 0m28.7s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp2tf7aP/tmp/scripts/ 0m28.7s INFO: Running scripts post_setup 0m28.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_experimental'] 0m28.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_experimental'] 0m28.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_forbid_home'] 0m28.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_forbid_home'] 0m28.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_squeeze-backports'] 0m28.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_squeeze-backports'] 0m28.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m29.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (1615kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m29.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m29.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 0m30.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 0m30.0s INFO: Running scripts pre_test 0m30.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_test_root_password'] 0m30.1s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m30.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_test_root_password'] 0m30.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'show', 'nut-snmp'] 0m30.1s DUMP: Package: nut-snmp Priority: optional Section: admin Installed-Size: 112 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.2.2-6.5 Depends: libc6 (>= 2.7-1), libsnmp15 (>= 5.4.1~dfsg), libssl0.9.8 (>= 0.9.8f-5), nut (>= 1.4.1-pre1) Conflicts: nut (<= 1.4.0) Filename: pool/main/n/nut/nut-snmp_2.2.2-6.5_amd64.deb Size: 54212 MD5sum: 513d4a6c614dff9556ab1b8c6864b92e SHA1: 356e407a4ad4a450d7c14a6e6903e3b4537c9ea7 SHA256: 902da526048168e83eab4c212dd1eb5a403392e8b8c677067ecab1214a9b4c5e Description: A meta SNMP Driver subsystem for the nut - Network UPS Tools nut is a client/server uninterruptible power supply (UPS) monitoring system that permits the sharing of one (or more) UPS between several machines. The 'server' monitors the UPS and notifies the 'clients' when the UPS is on or has a low battery. . This package contains snmp-ups, the Meta SNMP UPS Driver, which support different MIBS (IETF, MGE, APC) for Network UPS Tools. It adds an SNMP Manager interface to the core system. You probably don't need it if you don't understand what this is all about. Homepage: http://www.networkupstools.org Tag: admin::monitoring, hardware::power, hardware::power:ups, protocol::snmp, role::plugin 0m30.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'show', 'nut-snmp'] 0m30.1s INFO: apt-cache knows about the following packages: nut-snmp 0m30.1s INFO: Running scripts pre_install 0m30.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 0m30.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 0m30.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 0m30.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 0m30.4s DUMP: nut-snmp: Installed: (none) Candidate: 2.2.2-6.5 Version table: 2.2.2-6.5 0 500 http://archive.debian.org lenny/main Packages 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp'] 0m33.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libperl5.10 libsensors3 libsnmp-base libsnmp15 libssl0.9.8 libsysfs2 libupsclient1 libvolume-id0 libwrap0 nut udev Suggested packages: lm-sensors nut-cgi nut-dev nut-xml Recommended packages: tcpd The following NEW packages will be installed: libperl5.10 libsensors3 libsnmp-base libsnmp15 libssl0.9.8 libsysfs2 libupsclient1 libvolume-id0 libwrap0 nut nut-snmp udev 0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded. Need to get 6454kB of archives. After this operation, 15.1MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main libvolume-id0 0.125-7+lenny3 [78.2kB] Get:2 http://archive.debian.org lenny/main udev 0.125-7+lenny3 [267kB] Get:3 http://archive.debian.org lenny/main libssl0.9.8 0.9.8g-15+lenny16 [981kB] Get:4 http://archive.debian.org lenny/main libwrap0 7.6.q-16 [31.9kB] Get:5 http://archive.debian.org lenny/main libperl5.10 5.10.0-19lenny5 [1010B] Get:6 http://archive.debian.org lenny/main libsysfs2 2.1.0-5 [28.9kB] Get:7 http://archive.debian.org lenny/main libsensors3 1:2.10.7-1 [128kB] Get:8 http://archive.debian.org lenny/main libsnmp-base 5.4.1~dfsg-12 [1369kB] Get:9 http://archive.debian.org lenny/main libsnmp15 5.4.1~dfsg-12 [2174kB] Get:10 http://archive.debian.org lenny/main libupsclient1 2.2.2-6.5 [35.8kB] Get:11 http://archive.debian.org lenny/main nut 2.2.2-6.5 [1305kB] Get:12 http://archive.debian.org lenny/main nut-snmp 2.2.2-6.5 [54.2kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 6454kB in 0s (9227kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libvolume-id0. (Reading database ... 6013 files and directories currently installed.) Unpacking libvolume-id0 (from .../libvolume-id0_0.125-7+lenny3_amd64.deb) ... Selecting previously deselected package udev. Unpacking udev (from .../udev_0.125-7+lenny3_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-15+lenny16_amd64.deb) ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6.q-16_amd64.deb) ... Selecting previously deselected package libperl5.10. Unpacking libperl5.10 (from .../libperl5.10_5.10.0-19lenny5_amd64.deb) ... Selecting previously deselected package libsysfs2. Unpacking libsysfs2 (from .../libsysfs2_2.1.0-5_amd64.deb) ... Selecting previously deselected package libsensors3. Unpacking libsensors3 (from .../libsensors3_1%3a2.10.7-1_amd64.deb) ... Selecting previously deselected package libsnmp-base. Unpacking libsnmp-base (from .../libsnmp-base_5.4.1~dfsg-12_all.deb) ... Selecting previously deselected package libsnmp15. Unpacking libsnmp15 (from .../libsnmp15_5.4.1~dfsg-12_amd64.deb) ... Selecting previously deselected package libupsclient1. Unpacking libupsclient1 (from .../libupsclient1_2.2.2-6.5_amd64.deb) ... Selecting previously deselected package nut. Unpacking nut (from .../nut_2.2.2-6.5_amd64.deb) ... Selecting previously deselected package nut-snmp. Unpacking nut-snmp (from .../nut-snmp_2.2.2-6.5_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libvolume-id0 (0.125-7+lenny3) ... Setting up udev (0.125-7+lenny3) ... unable to open device '/class/net/*' A chroot environment has been detected, udev not started. Setting up libssl0.9.8 (0.9.8g-15+lenny16) ... Setting up libwrap0 (7.6.q-16) ... Setting up libperl5.10 (5.10.0-19lenny5) ... Setting up libsysfs2 (2.1.0-5) ... Setting up libsensors3 (1:2.10.7-1) ... .udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation. Creating config file /etc/sensors.conf with new version Setting up libsnmp-base (5.4.1~dfsg-12) ... Setting up libsnmp15 (5.4.1~dfsg-12) ... Setting up libupsclient1 (2.2.2-6.5) ... Setting up nut (2.2.2-6.5) ... Stopping Network UPS Tools:. Setting up nut-snmp (2.2.2-6.5) ... 0m33.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp'] 0m33.9s INFO: Running scripts post_install 0m33.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 0m34.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 0m34.3s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmp2tf7aP to squeeze 0m34.3s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main deb http://mirror.bm.debian.org/debian/ squeeze contrib deb http://mirror.bm.debian.org/debian/ squeeze non-free 0m34.3s INFO: Running scripts pre_distupgrade 0m34.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_distupgrade_exceptions'] 0m34.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_distupgrade_exceptions'] 0m34.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m34.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m34.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'update'] 0m36.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672B] Get:2 http://mirror.bm.debian.org squeeze Release [99.8kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8602kB] Get:4 http://mirror.bm.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://mirror.bm.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 1s (7302kB/s) Reading package lists... 0m36.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'update'] 0m36.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-yf', 'dist-upgrade'] 1m0.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libsensors4 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libperl5.10 libreadline5 libselinux1 libsensors3 libsepol1 libslang2 libsnmp-base libsnmp15 libss2 libssl0.9.8 libstdc++6 libsysfs2 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libupsclient1 libusb-0.1-4 libuuid1 libwrap0 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin nut nut-snmp passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf udev util-linux zlib1g 80 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 41.3MB of archives. After this operation, 12.5MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main libperl5.10 5.10.1-17squeeze5 [1156B] Get:18 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:19 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:22 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:23 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:24 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:25 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:26 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:27 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:28 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:29 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:30 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:31 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:32 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:33 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:34 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:35 http://mirror.bm.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:36 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:37 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:38 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:39 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:40 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:41 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:42 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:43 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:44 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:45 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:46 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:47 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:48 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:49 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:50 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:51 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:52 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:53 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:54 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:55 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:56 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:57 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:58 http://mirror.bm.debian.org squeeze/main udev 164-3 [522kB] Get:59 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:60 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:61 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:62 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:63 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:64 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:65 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:66 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:67 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:68 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:69 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:70 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:71 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:72 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:73 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:74 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:75 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:76 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:77 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:78 http://mirror.bm.debian.org squeeze/main libssl0.9.8 0.9.8o-4squeeze14 [1002kB] Get:79 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:80 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:81 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:82 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:83 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:84 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:85 http://mirror.bm.debian.org squeeze/main libsysfs2 2.1.0+repack-1 [29.2kB] Get:86 http://mirror.bm.debian.org squeeze/main libsensors3 1:2.10.8-2 [129kB] Get:87 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] Get:88 http://mirror.bm.debian.org squeeze/main libsensors4 1:3.1.2-6 [54.3kB] Get:89 http://mirror.bm.debian.org squeeze/main libsnmp-base 5.4.3~dfsg-2 [1097kB] Get:90 http://mirror.bm.debian.org squeeze/main libwrap0 7.6.q-19 [51.2kB] Get:91 http://mirror.bm.debian.org squeeze/main libsnmp15 5.4.3~dfsg-2 [2235kB] Get:92 http://mirror.bm.debian.org squeeze/main libupsclient1 2.4.3-1.1squeeze2 [43.4kB] Get:93 http://mirror.bm.debian.org squeeze/main nut 2.4.3-1.1squeeze2 [1391kB] Get:94 http://mirror.bm.debian.org squeeze/main nut-snmp 2.4.3-1.1squeeze2 [67.9kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 41.3MB in 0s (49.1MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6511 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6513 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6514 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6522 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6522 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6532 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6574 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6580 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6587 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6583 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6595 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6595 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6618 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6644 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6666 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6666 files and directories currently installed.) Preparing to replace libperl5.10 5.10.0-19lenny5 (using .../libperl5.10_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement libperl5.10 ... Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6715 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6715 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6716 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6716 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6716 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6733 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6737 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6737 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6737 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6741 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6747 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6744 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6744 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6745 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6748 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6750 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6750 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu May 23 12:39:43 UTC 2013. Universal Time is now: Thu May 23 12:39:43 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6756 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6760 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6761 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6764 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6793 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130523T1239.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6794 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6814 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6817 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6819 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6821 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6821 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6827 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6824 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6824 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6825 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6825 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6822 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6822 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6822 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6823 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6774 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libudev0. (Reading database ... 6774 files and directories currently installed.) Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace udev 0.125-7+lenny3 (using .../archives/udev_164-3_amd64.deb) ... unrecognized command 'log-priority=0' Unpacking replacement udev ... Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6846 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6846 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6846 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6859 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6859 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6860 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6868 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6868 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6912 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6912 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6912 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6913 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6913 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6930 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6930 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6929 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace libssl0.9.8 0.9.8g-15+lenny16 (using .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Unpacking replacement libssl0.9.8 ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace libsysfs2 2.1.0-5 (using .../libsysfs2_2.1.0+repack-1_amd64.deb) ... Unpacking replacement libsysfs2 ... Preparing to replace libsensors3 1:2.10.7-1 (using .../libsensors3_1%3a2.10.8-2_amd64.deb) ... Unpacking replacement libsensors3 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Selecting previously deselected package libsensors4. Unpacking libsensors4 (from .../libsensors4_1%3a3.1.2-6_amd64.deb) ... Preparing to replace libsnmp-base 5.4.1~dfsg-12 (using .../libsnmp-base_5.4.3~dfsg-2_all.deb) ... Unpacking replacement libsnmp-base ... Preparing to replace libwrap0 7.6.q-16 (using .../libwrap0_7.6.q-19_amd64.deb) ... Unpacking replacement libwrap0 ... Preparing to replace libsnmp15 5.4.1~dfsg-12 (using .../libsnmp15_5.4.3~dfsg-2_amd64.deb) ... Unpacking replacement libsnmp15 ... Preparing to replace libupsclient1 2.2.2-6.5 (using .../libupsclient1_2.4.3-1.1squeeze2_amd64.deb) ... Unpacking replacement libupsclient1 ... Preparing to replace nut 2.2.2-6.5 (using .../nut_2.4.3-1.1squeeze2_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement nut ... Preparing to replace nut-snmp 2.2.2-6.5 (using .../nut-snmp_2.4.3-1.1squeeze2_amd64.deb) ... Unpacking replacement nut-snmp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libperl5.10 (5.10.1-17squeeze5) ... Setting up libudev0 (164-3) ... Setting up udev (164-3) ... Installing new version of config file /etc/init.d/udev-mtab ... Installing new version of config file /etc/init.d/udev ... Installing new version of config file /etc/udev/links.conf ... Installing new version of config file /etc/udev/udev.conf ... A chroot environment has been detected, udev not started. Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up libsysfs2 (2.1.0+repack-1) ... Setting up libsensors3 (1:2.10.8-2) ... Setting up makedev (2.3.1-89) ... .udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation. Setting up libsensors4 (1:3.1.2-6) ... Setting up libsnmp-base (5.4.3~dfsg-2) ... Setting up libwrap0 (7.6.q-19) ... Setting up libsnmp15 (5.4.3~dfsg-2) ... Setting up libupsclient1 (2.4.3-1.1squeeze2) ... Setting up nut (2.4.3-1.1squeeze2) ... Installing new version of config file /etc/init.d/nut ... migrating /etc/default/nut to /etc/nut/nut.conf invoke-rc.d: policy-rc.d denied execution of start. Setting up nut-snmp (2.4.3-1.1squeeze2) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m0.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-yf', 'dist-upgrade'] 1m0.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'show', 'nut-snmp'] 1m1.2s DUMP: Package: nut-snmp Priority: optional Section: admin Installed-Size: 152 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.4.3-1.1squeeze2 Depends: libc6 (>= 2.4), libsnmp15 (>= 5.4.3~dfsg), nut (>= 1.4.1-pre1) Conflicts: nut (<= 1.4.0) Filename: pool/main/n/nut/nut-snmp_2.4.3-1.1squeeze2_amd64.deb Size: 67890 MD5sum: f23e570929c98344b05284a60413ff20 SHA1: 90793b36bb632f108c7cc09f54008abae6ab1c11 SHA256: a29d8cc2f0f3e9943df69794d9d4e165906627ea6495d04fdfe9feef22868c16 Description: network UPS tools - SNMP driver Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. . This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which supports various MIBs including IETF, MGE, and APC. It adds an SNMP Manager interface to the core NUT system. Homepage: http://www.networkupstools.org Tag: admin::monitoring, hardware::power, hardware::power:ups, protocol::snmp, role::plugin 1m1.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'show', 'nut-snmp'] 1m1.2s INFO: apt-cache knows about the following packages: nut-snmp 1m1.2s INFO: Running scripts pre_install 1m1.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 1m1.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 1m1.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m1.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 1m1.3s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=non-free origin mirror.bm.debian.org 500 http://mirror.bm.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=contrib origin mirror.bm.debian.org 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 1m1.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 1m1.3s DUMP: nut-snmp: Installed: 2.4.3-1.1squeeze2 Candidate: 2.4.3-1.1squeeze2 Version table: *** 2.4.3-1.1squeeze2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 1m1.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp'] 1m1.7s DUMP: Reading package lists... Building dependency tree... Reading state information... nut-snmp is already the newest version. The following packages were automatically installed and are no longer required: libsensors3 libsysfs2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp'] 1m1.7s INFO: Running scripts post_install 1m1.7s INFO: Running scripts post_distupgrade 1m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_exceptions'] 1m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_exceptions'] 1m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_experimental'] 1m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_experimental'] 1m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m1.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m2.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m2.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m2.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m2.6s INFO: Running scripts pre_install 1m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 1m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_exceptions'] 1m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 1m2.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/non-free amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=non-free origin mirror.bm.debian.org 500 http://mirror.bm.debian.org/debian/ squeeze/contrib amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=contrib origin mirror.bm.debian.org 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.7,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 1m2.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy'] 1m2.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 1m2.7s DUMP: nut-snmp: Installed: 2.4.3-1.1squeeze2 Candidate: 2.4.3-1.1squeeze2 Version table: *** 2.4.3-1.1squeeze2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 1m2.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-cache', 'policy', 'nut-snmp'] 1m2.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp=2.4.3-1.1squeeze2'] 1m3.1s DUMP: Reading package lists... Building dependency tree... Reading state information... nut-snmp is already the newest version. The following packages were automatically installed and are no longer required: libsensors3 libsysfs2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', '-y', 'install', 'nut-snmp=2.4.3-1.1squeeze2'] 1m3.1s INFO: Running scripts post_install 1m3.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m3.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--get-selections', '*'] 1m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libperl5.10 install libreadline5 install libreadline6 install libselinux1 install libsensors3 install libsensors4 install libsepol1 install libslang2 install libsnmp-base install libsnmp15 install libss2 install libssl0.9.8 install libstdc++6 install libsysfs2 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libupsclient1 install libusb-0.1-4 install libuuid1 install libvolume-id0 install libwrap0 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install nut install nut-snmp install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install udev install util-linux install xz-utils install zlib1g install 1m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--get-selections', '*'] 1m4.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', '-ac'] 1m4.7s DUMP: debsums: no md5sums for mawk debsums: missing file /srv/piuparts.debian.org/tmp/tmp2tf7aP/etc/default/nut (from nut package) /srv/piuparts.debian.org/tmp/tmp2tf7aP/etc/nut/nut.conf 1m4.7s DEBUG: Command failed (status=2), but ignoring error: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', '-ac'] 1m4.7s ERROR: FAIL: debsums reports modifications inside the chroot: debsums: no md5sums for mawk debsums: missing file /etc/default/nut (from nut package) /etc/nut/nut.conf 1m4.7s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'nut-snmp'] 1m4.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'nut-snmp'] 1m4.8s INFO: Running scripts pre_remove 1m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_exceptions'] 1m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/pre_remove_exceptions'] 1m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'remove', 'libperl5.10', 'libsnmp-base', 'nut', 'libsysfs2', 'udev', 'libwrap0', 'libupsclient1', 'libsnmp15', 'libvolume-id0', 'libssl0.9.8', 'libsensors4', 'libsensors3', 'nut-snmp'] 1m6.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libperl5.10 libsensors3 libsensors4 libsnmp-base libsnmp15 libssl0.9.8 libsysfs2 libupsclient1 libvolume-id0 libwrap0 nut nut-snmp udev 0 upgraded, 0 newly installed, 13 to remove and 0 not upgraded. After this operation, 14.7 MB disk space will be freed. (Reading database ... 6948 files and directories currently installed.) Removing nut-snmp ... Removing libsnmp15 ... Removing libperl5.10 ... Removing libsensors3 ... Removing libsensors4 ... Removing libsnmp-base ... Removing libssl0.9.8 ... Removing libsysfs2 ... Removing nut ... invoke-rc.d: policy-rc.d denied execution of stop. invoke-rc.d: policy-rc.d denied execution of stop. Removing libupsclient1 ... Removing libvolume-id0 ... Removing libwrap0 ... Removing udev ... 1m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'remove', 'libperl5.10', 'libsnmp-base', 'nut', 'libsysfs2', 'udev', 'libwrap0', 'libupsclient1', 'libsnmp15', 'libvolume-id0', 'libssl0.9.8', 'libsensors4', 'libsensors3', 'nut-snmp'] 1m6.8s INFO: Running scripts post_remove 1m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', 'libperl5.10', 'libsnmp-base', 'nut', 'libsysfs2', 'udev', 'libwrap0', 'libupsclient1', 'libsnmp15', 'libvolume-id0', 'libssl0.9.8', 'libsensors4', 'libsensors3'] 1m7.3s DUMP: dpkg: warning: ignoring request to remove libperl5.10 which isn't installed. (Reading database ... 6441 files and directories currently installed.) Removing libsnmp-base ... Purging configuration files for libsnmp-base ... Removing nut ... Purging configuration files for nut ... Removing libsysfs2 ... Purging configuration files for libsysfs2 ... Removing udev ... Purging configuration files for udev ... Removing libwrap0 ... Purging configuration files for libwrap0 ... Removing libupsclient1 ... Purging configuration files for libupsclient1 ... Removing libsnmp15 ... Purging configuration files for libsnmp15 ... Removing libvolume-id0 ... Purging configuration files for libvolume-id0 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libsensors4 ... Purging configuration files for libsensors4 ... Removing libsensors3 ... Purging configuration files for libsensors3 ... 1m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', 'libperl5.10', 'libsnmp-base', 'nut', 'libsysfs2', 'udev', 'libwrap0', 'libupsclient1', 'libsnmp15', 'libvolume-id0', 'libssl0.9.8', 'libsensors4', 'libsensors3'] 1m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', 'nut-snmp'] 1m7.4s DUMP: dpkg: warning: ignoring request to remove nut-snmp which isn't installed. 1m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', 'nut-snmp'] 1m7.4s INFO: Running scripts post_purge 1m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_purge_exceptions'] 1m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'tmp/scripts/post_purge_exceptions'] 1m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', '--pending'] 1m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--purge', '--pending'] 1m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--remove', '--pending'] 1m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg', '--remove', '--pending'] 1m7.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m7.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m7.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg-divert', '--list'] 1m7.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m7.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'dpkg-divert', '--list'] 1m7.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'clean'] 1m7.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'apt-get', 'clean'] 1m9.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'umount', '/proc'] 1m9.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2tf7aP', 'umount', '/proc'] 1m9.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m9.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp2tf7aP'] 1m9.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp2tf7aP 1m9.1s INFO: PASS: Upgrading between Debian distributions. 1m9.1s INFO: PASS: All tests. 1m9.1s INFO: piuparts run ends. ret=0 End: 2013-05-23 12:40:02 UTC