Start: 2014-07-19 12:15:04 UTC [lenny] Package: openafs-client Priority: optional Section: net Installed-Size: 7268 Maintainer: Russ Allbery Architecture: amd64 Source: openafs Version: 1.4.7.dfsg1-6+lenny4 Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), debconf (>= 0.5) | debconf-2.0 Recommends: openafs-modules-source (>= 1.2.9) | openafs-modules2, lsof Suggests: openafs-doc, openafs-krb5 Conflicts: arla, openafs-modules1 Filename: pool/main/o/openafs/openafs-client_1.4.7.dfsg1-6+lenny4_amd64.deb Size: 3461052 MD5sum: 534115c2b2c19e730f91522fe9c7dc51 SHA1: 91f262f48a8cd59105514e160473f8ae022d90a4 SHA256: 0b45d4043a259c7e5984ee6b6ae1765e1796f74edfe92bab68c08faada523677 Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Homepage: http://www.openafs.org/ Tag: admin::filesystem, implemented-in::c, interface::commandline, interface::text-mode, network::client, protocol::kerberos, role::program, uitoolkit::ncurses, use::storing, works-with::file [squeeze] Package: openafs-client Priority: optional Section: net Installed-Size: 7392 Maintainer: Russ Allbery Architecture: amd64 Source: openafs Version: 1.4.12.1+dfsg-4+squeeze3 Depends: libc6 (>= 2.7), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libncurses5 (>= 5.7+20100313), debconf (>= 0.5) | debconf-2.0 Recommends: lsof, openafs-modules-dkms (>= 1.4.12.1+dfsg-4+squeeze3) | openafs-modules-source (>= 1.4.12.1+dfsg-4+squeeze3) | openafs-modules2 Suggests: openafs-doc, openafs-krb5 Conflicts: arla, openafs-modules1 Filename: pool/main/o/openafs/openafs-client_1.4.12.1+dfsg-4+squeeze3_amd64.deb Size: 3599182 MD5sum: e516b61b05d1c81c529d767663d88b96 SHA1: e7857da996c5bc0ba0156380a693fc720c171e98 SHA256: d0890d27c24aa2a04559c63c1f4490a4aac4f681082f635d108dec91c4a47225 Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Homepage: http://www.openafs.org/ Tag: admin::filesystem, implemented-in::c, interface::commandline, interface::text-mode, network::client, protocol::kerberos, role::program, uitoolkit::ncurses, use::storing, works-with::file Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt openafs-client=1.4.12.1+dfsg-4+squeeze3 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt openafs-client=1.4.12.1+dfsg-4+squeeze3 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmppftOjn 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmppftOjn 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmppftOjn', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmppftOjn', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 0m1.6s DEBUG: Created policy-rc.d and chmodded it. 0m1.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'update'] 0m2.4s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'update'] 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', '-yf', 'dist-upgrade'] 0m2.8s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', '-yf', 'dist-upgrade'] 0m2.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmppftOjn/tmp/scripts/ 0m2.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmppftOjn/tmp/scripts/ 0m2.8s INFO: Running scripts post_setup 0m2.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_experimental'] 0m2.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_experimental'] 0m2.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_forbid_home'] 0m2.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_forbid_home'] 0m2.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.9s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 1s (173kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.1s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmppftOjn to squeeze 0m5.1s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m5.1s INFO: Running scripts pre_distupgrade 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_exceptions'] 0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_exceptions'] 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'update'] 0m7.1s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (8034kB/s) Reading package lists... 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'update'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', '-yf', 'dist-upgrade'] 0m37.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 1s (18.2MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6014 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6016 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6017 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6025 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6025 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6035 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6077 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6083 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6090 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6086 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6098 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6121 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6147 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6169 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6169 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6218 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6235 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6239 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6239 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6247 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6250 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6252 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6252 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Jul 19 12:15:26 UTC 2014. Universal Time is now: Sat Jul 19 12:15:26 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6253 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6254 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6257 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20140719T1215.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6305 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6308 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6310 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6312 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6312 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6315 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6315 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6314 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6265 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6265 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6265 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6265 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6278 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6278 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6278 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6279 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6331 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6331 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6331 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6332 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6332 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6349 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6349 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6348 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m37.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', '-yf', 'dist-upgrade'] 0m37.9s INFO: Running scripts post_distupgrade 0m37.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_exceptions'] 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_exceptions'] 0m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_experimental'] 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_experimental'] 0m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m38.0s DUMP: Enabling dpkg --force-unsafe-io. 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m38.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m38.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m38.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m38.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m38.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'clean'] 0m38.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'apt-get', 'clean'] 0m39.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'dpkg', '--get-selections', '*'] 0m39.0s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m39.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'dpkg', '--get-selections', '*'] 0m39.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'dpkg-divert', '--list'] 0m39.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m39.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'dpkg-divert', '--list'] 0m39.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'umount', '/proc'] 0m39.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmppftOjn', 'umount', '/proc'] 0m39.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m39.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmppftOjn'] 0m39.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmppftOjn 0m39.4s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m39.4s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpbnNHBZ 0m39.4s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpbnNHBZ 0m39.4s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m40.9s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m40.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m41.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m41.0s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 0m41.0s DEBUG: Created policy-rc.d and chmodded it. 0m41.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'update'] 0m41.7s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 0m41.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'update'] 0m41.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-yf', 'dist-upgrade'] 0m42.0s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m42.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-yf', 'dist-upgrade'] 0m42.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpbnNHBZ/tmp/scripts/ 0m42.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpbnNHBZ/tmp/scripts/ 0m42.0s INFO: Running scripts post_setup 0m42.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_experimental'] 0m42.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_experimental'] 0m42.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_forbid_home'] 0m42.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_forbid_home'] 0m42.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m42.1s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m42.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m42.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_squeeze-backports'] 0m42.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_squeeze-backports'] 0m42.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m44.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 1s (229kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m44.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m44.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 0m44.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 0m44.3s INFO: Running scripts pre_test 0m44.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_test_root_password'] 0m44.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m44.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_test_root_password'] 0m44.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'show', 'openafs-client'] 0m44.4s DUMP: Package: openafs-client Priority: optional Section: net Installed-Size: 7268 Maintainer: Russ Allbery Architecture: amd64 Source: openafs Version: 1.4.7.dfsg1-6+lenny4 Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), debconf (>= 0.5) | debconf-2.0 Recommends: openafs-modules-source (>= 1.2.9) | openafs-modules2, lsof Suggests: openafs-doc, openafs-krb5 Conflicts: arla, openafs-modules1 Filename: pool/main/o/openafs/openafs-client_1.4.7.dfsg1-6+lenny4_amd64.deb Size: 3461052 MD5sum: 534115c2b2c19e730f91522fe9c7dc51 SHA1: 91f262f48a8cd59105514e160473f8ae022d90a4 SHA256: 0b45d4043a259c7e5984ee6b6ae1765e1796f74edfe92bab68c08faada523677 Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Homepage: http://www.openafs.org/ Tag: admin::filesystem, implemented-in::c, interface::commandline, interface::text-mode, network::client, protocol::kerberos, role::program, uitoolkit::ncurses, use::storing, works-with::file 0m44.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'show', 'openafs-client'] 0m44.4s INFO: apt-cache knows about the following packages: openafs-client 0m44.4s INFO: Running scripts pre_install 0m44.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 0m44.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 0m44.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 0m44.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 0m44.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 0m44.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 0m44.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m44.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m44.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 0m44.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 0m44.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 0m44.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 0m44.7s DUMP: openafs-client: Installed: (none) Candidate: 1.4.7.dfsg1-6+lenny4 Version table: 1.4.7.dfsg1-6+lenny4 0 500 http://archive.debian.org lenny/main Packages 0m44.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 0m44.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client'] 1m1.0s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: openafs-doc openafs-krb5 Recommended packages: openafs-modules-source openafs-modules2 lsof The following NEW packages will be installed: openafs-client 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 3461kB of archives. After this operation, 7442kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main openafs-client 1.4.7.dfsg1-6+lenny4 [3461kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3461kB in 15s (229kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package openafs-client. (Reading database ... 6014 files and directories currently installed.) Unpacking openafs-client (from .../openafs-client_1.4.7.dfsg1-6+lenny4_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up openafs-client (1.4.7.dfsg1-6+lenny4) ... 1m1.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client'] 1m1.0s INFO: Running scripts post_install 1m1.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m1.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m1.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m1.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m1.3s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpbnNHBZ to squeeze 1m1.3s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 1m1.3s INFO: Running scripts pre_distupgrade 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_exceptions'] 1m1.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_exceptions'] 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m1.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m1.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m1.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m1.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m1.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m1.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'update'] 1m3.3s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (7775kB/s) Reading package lists... 1m3.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'update'] 1m3.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-yf', 'dist-upgrade'] 1m31.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin openafs-client passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 70 upgraded, 17 newly installed, 0 to remove and 0 not upgraded. Need to get 38.8MB of archives. After this operation, 14.8MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main libkeyutils1 1.4-1 [6942B] Get:79 http://mirror.bm.debian.org squeeze/main libkrb5support0 1.8.3+dfsg-4squeeze7 [46.5kB] Get:80 http://mirror.bm.debian.org squeeze/main libk5crypto3 1.8.3+dfsg-4squeeze7 [106kB] Get:81 http://mirror.bm.debian.org squeeze/main libkrb5-3 1.8.3+dfsg-4squeeze7 [374kB] Get:82 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:83 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:84 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:85 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:86 http://mirror.bm.debian.org squeeze/main openafs-client 1.4.12.1+dfsg-4+squeeze3 [3599kB] Get:87 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 38.8MB in 1s (22.0MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6266 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6268 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6269 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6277 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6277 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6287 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6329 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6335 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6342 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6338 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6350 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6350 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6373 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6399 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6421 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6421 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6469 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6469 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6470 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6470 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6470 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6487 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6491 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6491 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6495 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6501 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6498 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6498 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6499 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6502 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6504 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6504 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Jul 19 12:16:22 UTC 2014. Universal Time is now: Sat Jul 19 12:16:22 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6501 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6505 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6506 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6509 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6538 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20140719T1216.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6539 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6557 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6560 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6562 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6564 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6564 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6570 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6567 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6567 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6568 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6568 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6565 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6565 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6565 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6566 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6517 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6517 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6517 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6517 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6530 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6530 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6530 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6531 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6539 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6539 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6583 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6583 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6583 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6584 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6584 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6601 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6601 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6600 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libkeyutils1. Unpacking libkeyutils1 (from .../libkeyutils1_1.4-1_amd64.deb) ... Selecting previously deselected package libkrb5support0. Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package libk5crypto3. Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package libkrb5-3. Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-4squeeze7_amd64.deb) ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace openafs-client 1.4.7.dfsg1-6+lenny4 (using .../openafs-client_1.4.12.1+dfsg-4+squeeze3_amd64.deb) ... Unpacking replacement openafs-client ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up libkeyutils1 (1.4-1) ... Setting up libkrb5support0 (1.8.3+dfsg-4squeeze7) ... Setting up libk5crypto3 (1.8.3+dfsg-4squeeze7) ... Setting up libkrb5-3 (1.8.3+dfsg-4squeeze7) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up openafs-client (1.4.12.1+dfsg-4+squeeze3) ... Installing new version of config file /etc/init.d/openafs-client ... invoke-rc.d: policy-rc.d denied execution of start. Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m31.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-yf', 'dist-upgrade'] 1m31.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'show', 'openafs-client'] 1m32.5s DUMP: Package: openafs-client Priority: optional Section: net Installed-Size: 7392 Maintainer: Russ Allbery Architecture: amd64 Source: openafs Version: 1.4.12.1+dfsg-4+squeeze3 Depends: libc6 (>= 2.7), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libncurses5 (>= 5.7+20100313), debconf (>= 0.5) | debconf-2.0 Recommends: lsof, openafs-modules-dkms (>= 1.4.12.1+dfsg-4+squeeze3) | openafs-modules-source (>= 1.4.12.1+dfsg-4+squeeze3) | openafs-modules2 Suggests: openafs-doc, openafs-krb5 Conflicts: arla, openafs-modules1 Filename: pool/main/o/openafs/openafs-client_1.4.12.1+dfsg-4+squeeze3_amd64.deb Size: 3599182 MD5sum: e516b61b05d1c81c529d767663d88b96 SHA1: e7857da996c5bc0ba0156380a693fc720c171e98 SHA256: d0890d27c24aa2a04559c63c1f4490a4aac4f681082f635d108dec91c4a47225 Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Homepage: http://www.openafs.org/ Tag: admin::filesystem, implemented-in::c, interface::commandline, interface::text-mode, network::client, protocol::kerberos, role::program, uitoolkit::ncurses, use::storing, works-with::file 1m32.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'show', 'openafs-client'] 1m32.5s INFO: apt-cache knows about the following packages: openafs-client 1m32.5s INFO: Running scripts pre_install 1m32.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 1m32.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 1m32.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 1m32.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 1m32.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 1m32.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 1m32.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m32.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m32.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 1m32.6s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 1m32.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 1m32.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 1m32.6s DUMP: openafs-client: Installed: 1.4.12.1+dfsg-4+squeeze3 Candidate: 1.4.12.1+dfsg-4+squeeze3 Version table: *** 1.4.12.1+dfsg-4+squeeze3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 1m32.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 1m32.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client'] 1m33.0s DUMP: Reading package lists... Building dependency tree... Reading state information... openafs-client is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client'] 1m33.0s INFO: Running scripts post_install 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m33.0s INFO: Running scripts post_distupgrade 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_exceptions'] 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_exceptions'] 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_experimental'] 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_experimental'] 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m33.0s DUMP: Enabling dpkg --force-unsafe-io. 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m33.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m33.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m33.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m33.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m33.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m33.5s INFO: Running scripts pre_install 1m33.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 1m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_database-server'] 1m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 1m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_exceptions'] 1m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 1m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_extras'] 1m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 1m33.6s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 1m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy'] 1m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 1m33.7s DUMP: openafs-client: Installed: 1.4.12.1+dfsg-4+squeeze3 Candidate: 1.4.12.1+dfsg-4+squeeze3 Version table: *** 1.4.12.1+dfsg-4+squeeze3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 1m33.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-cache', 'policy', 'openafs-client'] 1m33.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client=1.4.12.1+dfsg-4+squeeze3'] 1m34.0s DUMP: Reading package lists... Building dependency tree... Reading state information... openafs-client is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', '-y', 'install', 'openafs-client=1.4.12.1+dfsg-4+squeeze3'] 1m34.0s INFO: Running scripts post_install 1m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_install_exceptions'] 1m34.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m34.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m34.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--get-selections', '*'] 1m34.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install libk5crypto3 install libkeyutils1 install libkrb5-3 install libkrb5support0 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install openafs-client install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m34.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--get-selections', '*'] 1m34.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', '-ac'] 1m35.4s DUMP: debsums: no md5sums for mawk 1m35.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', '-ac'] 1m35.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 1m35.4s DUMP: 0.11.6~bpo70+1 1m35.4s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 1m35.4s INFO: Running adequate version 0.11.6~bpo70+1 now. 1m35.4s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'openafs-client'] 1m35.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'openafs-client'] 1m35.6s INFO: Running scripts pre_remove 1m35.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 1m35.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 1m35.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m35.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 1m35.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m35.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 1m35.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m35.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 1m35.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_exceptions'] 1m35.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/pre_remove_exceptions'] 1m35.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'remove', 'libkrb5-3', 'libk5crypto3', 'libkeyutils1', 'libkrb5support0', 'openafs-client'] 1m36.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 openafs-client 0 upgraded, 0 newly installed, 5 to remove and 0 not upgraded. After this operation, 9011 kB disk space will be freed. (Reading database ... 6698 files and directories currently installed.) Removing openafs-client ... invoke-rc.d: policy-rc.d denied execution of stop. Removing libkrb5-3 ... Removing libk5crypto3 ... Removing libkrb5support0 ... Removing libkeyutils1 ... 1m36.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'remove', 'libkrb5-3', 'libk5crypto3', 'libkeyutils1', 'libkrb5support0', 'openafs-client'] 1m36.4s INFO: Running scripts post_remove 1m36.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_remove_exceptions_lenny'] 1m36.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_remove_exceptions_lenny'] 1m36.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_remove_extras'] 1m36.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_remove_extras'] 1m36.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', 'libkrb5-3', 'libk5crypto3', 'libkeyutils1', 'libkrb5support0'] 1m36.5s DUMP: (Reading database ... 6413 files and directories currently installed.) Removing libkrb5-3 ... Purging configuration files for libkrb5-3 ... Removing libk5crypto3 ... Purging configuration files for libk5crypto3 ... Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing libkrb5support0 ... Purging configuration files for libkrb5support0 ... 1m36.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', 'libkrb5-3', 'libk5crypto3', 'libkeyutils1', 'libkrb5support0'] 1m36.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', 'openafs-client'] 1m36.7s DUMP: (Reading database ... 6413 files and directories currently installed.) Removing openafs-client ... Purging configuration files for openafs-client ... 1m36.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', 'openafs-client'] 1m36.7s INFO: Running scripts post_purge 1m36.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_purge_exceptions'] 1m36.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'tmp/scripts/post_purge_exceptions'] 1m36.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', '--pending'] 1m36.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--purge', '--pending'] 1m36.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--remove', '--pending'] 1m36.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg', '--remove', '--pending'] 1m36.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m37.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m37.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg-divert', '--list'] 1m37.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 1m37.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'dpkg-divert', '--list'] 1m37.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'clean'] 1m37.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'apt-get', 'clean'] 1m38.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'umount', '/proc'] 1m38.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ', 'umount', '/proc'] 1m38.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m38.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpbnNHBZ'] 1m38.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpbnNHBZ 1m38.1s INFO: PASS: Upgrading between Debian distributions. 1m38.1s INFO: PASS: All tests. 1m38.1s INFO: piuparts run ends. ret=0 End: 2014-07-19 12:16:42 UTC