Start: 2015-03-26 21:36:01 UTC [lenny] Package: recode Priority: optional Section: text Installed-Size: 780 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-15 Depends: libc6 (>= 2.7-1), librecode0 (>= 3.6) Filename: pool/main/r/recode/recode_3.6-15_amd64.deb Size: 196702 MD5sum: ac22a6d444a7142a6c0ddb6ff17c941d SHA1: ab82667576e534c6cb108037fb3002a4a7b7eb85 SHA256: 0604b2ac859dad51f2304ae983ffbe1dc17729e43e194f102786f2997ed13447 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text [squeeze] Package: recode Priority: optional Section: text Installed-Size: 772 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-17 Depends: libc6 (>= 2.3), librecode0 (>= 3.6), dpkg (>= 1.15.4) | install-info Filename: pool/main/r/recode/recode_3.6-17_amd64.deb Size: 197762 MD5sum: c99bccfee824bce1e7bfb0c3584a8978 SHA1: 25ee12258f05963b43ebaa8ab944ef6fb68df001 SHA256: e55a735f52e12164ad1d6fec20432dc25fa24d2c263e474b681ae5a846def6b3 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt recode=3.6-17 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.63~201503052127~0.62-88-g5078697 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt recode=3.6-17 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpvvx8zQ 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpvvx8zQ 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 0m1.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 0m1.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 0m1.5s DEBUG: Created policy-rc.d and chmodded it. 0m1.5s DEBUG: Created resolv.conf. 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'update'] 0m2.1s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'update'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpvvx8zQ/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpvvx8zQ/tmp/scripts/ 0m2.1s INFO: Running scripts post_chroot_unpack 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s INFO: Running scripts post_setup 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_experimental'] 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_experimental'] 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m4.5s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (2456kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m4.5s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpvvx8zQ to squeeze 0m4.5s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m4.5s INFO: Running scripts pre_distupgrade 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_exceptions'] 0m4.5s DUMP: removed `/etc/adduser.conf' 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_exceptions'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'update'] 0m6.8s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (5768kB/s) Reading package lists... 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'update'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', '-yf', 'dist-upgrade'] 1m39.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 3s (11.3MB/s) (Reading database ... 6014 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6016 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.4-base. (Reading database ... 6017 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Setting up gcc-4.4-base (4.4.5-8) ... (Reading database ... 6025 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.5-8) ... Selecting previously deselected package liblzma2. (Reading database ... 6025 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Setting up liblzma2 (5.0.0-2) ... Selecting previously deselected package xz-utils. (Reading database ... 6035 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Setting up xz-utils (5.0.0-2) ... (Reading database ... 6077 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Selecting previously deselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6083 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Setting up sensible-utils (0.0.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6090 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.4) ... Selecting previously deselected package dash. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6086 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Setting up dash (0.5.5.1-7.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6121 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Setting up coreutils (8.5-1) ... Selecting previously deselected package diffutils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6147 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Setting up diffutils (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Setting up liblocale-gettext-perl (1.05-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Setting up libtext-iconv-perl (1.7-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Setting up libtext-charwidth-perl (0.04-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Setting up libtext-wrapi18n-perl (0.06-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Setting up debconf-i18n (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6235 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.96-1) ... Selecting previously deselected package libdb4.8. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Setting up libdb4.8 (4.8.30-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6247 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6250 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.2-23.2squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Mar 26 21:36:52 UTC 2015. Universal Time is now: Thu Mar 26 21:36:52 UTC 2015. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6253 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6254 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6257 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.14.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20150326T2136.log success: Enabled dependency based boot system. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6305 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6308 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Setting up findutils (4.4.2-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6310 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.6.3-3+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.04) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6318 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.41-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.23-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Setting up diff (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Setting up mktemp (8.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.22) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6314 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.5-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.4.dfsg-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Setting up readline-common (6.1-3) ... Selecting previously deselected package libreadline6. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Setting up libreadline6 (6.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Setting up libusb-0.1-4 (2:0.1.12-16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6279 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Setting up libattr1 (1:2.4.44-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Setting up libacl1 (2.2.49-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.5-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6348 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', '-yf', 'dist-upgrade'] 1m39.6s INFO: Running scripts post_distupgrade 1m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_exceptions'] 1m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_exceptions'] 1m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_experimental'] 1m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_experimental'] 1m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m39.7s DUMP: Enabling dpkg --force-unsafe-io. 1m39.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m39.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m39.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m39.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m39.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m39.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m39.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m39.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m39.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m39.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m40.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'clean'] 1m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'apt-get', 'clean'] 1m40.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'dpkg', '--get-selections', '*'] 1m40.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m40.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'dpkg', '--get-selections', '*'] 1m40.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'dpkg-divert', '--list'] 1m40.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 1m40.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'dpkg-divert', '--list'] 1m40.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'umount', '/proc'] 1m40.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'umount', '/proc'] 1m40.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'umount', '/dev/pts'] 1m41.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ', 'umount', '/dev/pts'] 1m41.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m41.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpvvx8zQ'] 1m41.0s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpvvx8zQ 1m41.0s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m41.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpwpRXAi 1m41.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpwpRXAi 1m41.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m42.5s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m42.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'mount', '-t', 'proc', 'proc', '/proc'] 1m42.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'mount', '-t', 'proc', 'proc', '/proc'] 1m42.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 1m42.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 1m42.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 1m42.6s DEBUG: Created policy-rc.d and chmodded it. 1m42.6s DEBUG: Created resolv.conf. 1m42.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'update'] 1m43.2s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 1m43.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'update'] 1m43.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpwpRXAi/tmp/scripts/ 1m43.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpwpRXAi/tmp/scripts/ 1m43.2s INFO: Running scripts post_chroot_unpack 1m43.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-yf', 'dist-upgrade'] 1m43.5s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m43.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-yf', 'dist-upgrade'] 1m43.5s INFO: Running scripts post_setup 1m43.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_experimental'] 1m43.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_experimental'] 1m43.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_forbid_home'] 1m43.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_forbid_home'] 1m43.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_force-unsafe-io'] 1m43.6s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 1m43.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_force-unsafe-io'] 1m43.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_squeeze-backports'] 1m43.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_squeeze-backports'] 1m43.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m45.6s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (1617kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m45.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m45.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 1m45.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 1m45.8s INFO: Running scripts pre_test 1m45.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_test_root_password'] 1m45.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m45.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_test_root_password'] 1m45.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'show', 'recode'] 1m45.9s DUMP: Package: recode Priority: optional Section: text Installed-Size: 780 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-15 Depends: libc6 (>= 2.7-1), librecode0 (>= 3.6) Filename: pool/main/r/recode/recode_3.6-15_amd64.deb Size: 196702 MD5sum: ac22a6d444a7142a6c0ddb6ff17c941d SHA1: ab82667576e534c6cb108037fb3002a4a7b7eb85 SHA256: 0604b2ac859dad51f2304ae983ffbe1dc17729e43e194f102786f2997ed13447 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text 1m45.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'show', 'recode'] 1m45.9s INFO: apt-cache knows about the following packages: recode 1m45.9s INFO: Running scripts pre_install 1m45.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 1m45.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 1m45.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 1m46.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 1m46.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 1m46.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 1m46.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 1m46.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 1m46.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m46.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m46.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 1m46.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m46.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 1m46.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 1m46.2s DUMP: recode: Installed: (none) Candidate: 3.6-15 Version table: 3.6-15 0 500 http://archive.debian.org lenny/main Packages 1m46.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 1m46.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode'] 1m48.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: librecode0 The following NEW packages will be installed: librecode0 recode 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 969kB of archives. After this operation, 2699kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main librecode0 3.6-15 [772kB] Get:2 http://archive.debian.org lenny/main recode 3.6-15 [197kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 969kB in 0s (3065kB/s) Selecting previously deselected package librecode0. (Reading database ... 6014 files and directories currently installed.) Unpacking librecode0 (from .../librecode0_3.6-15_amd64.deb) ... Selecting previously deselected package recode. Unpacking recode (from .../recode_3.6-15_amd64.deb) ... Setting up librecode0 (3.6-15) ... Setting up recode (3.6-15) ... 1m48.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode'] 1m48.2s INFO: Running scripts post_install 1m48.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 1m48.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 1m48.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 1m48.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 1m48.4s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpwpRXAi to squeeze 1m48.4s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 1m48.4s INFO: Running scripts pre_distupgrade 1m48.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_exceptions'] 1m48.4s DUMP: removed `/etc/adduser.conf' 1m48.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_exceptions'] 1m48.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m48.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m48.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m48.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m48.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'update'] 1m50.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (7118kB/s) Reading package lists... 1m50.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'update'] 1m50.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-yf', 'dist-upgrade'] 3m21.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 librecode0 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common recode sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 71 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 35.7MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://mirror.bm.debian.org squeeze/main librecode0 3.6-17 [773kB] Get:83 http://mirror.bm.debian.org squeeze/main recode 3.6-17 [198kB] Get:84 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.7MB in 1s (21.0MB/s) (Reading database ... 6061 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6063 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.4-base. (Reading database ... 6064 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Setting up gcc-4.4-base (4.4.5-8) ... (Reading database ... 6072 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.5-8) ... Selecting previously deselected package liblzma2. (Reading database ... 6072 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Setting up liblzma2 (5.0.0-2) ... Selecting previously deselected package xz-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Setting up xz-utils (5.0.0-2) ... (Reading database ... 6124 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Selecting previously deselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6130 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Setting up sensible-utils (0.0.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6137 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.4) ... Selecting previously deselected package dash. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6133 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Setting up dash (0.5.5.1-7.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6145 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6145 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6168 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Setting up coreutils (8.5-1) ... Selecting previously deselected package diffutils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6194 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Setting up diffutils (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6216 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6216 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6264 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Setting up liblocale-gettext-perl (1.05-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6264 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Setting up libtext-iconv-perl (1.7-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Setting up libtext-charwidth-perl (0.04-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Setting up libtext-wrapi18n-perl (0.06-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Setting up debconf-i18n (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6282 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.96-1) ... Selecting previously deselected package libdb4.8. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Setting up libdb4.8 (4.8.30-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6290 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6296 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6293 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6293 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6294 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6297 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6299 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.2-23.2squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6299 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Mar 26 21:38:35 UTC 2015. Universal Time is now: Thu Mar 26 21:38:35 UTC 2015. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6296 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6300 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6301 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6304 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.14.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6333 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20150326T2138.log success: Enabled dependency based boot system. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6334 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6352 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6355 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Setting up findutils (4.4.2-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6357 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.6.3-3+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6359 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6359 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.04) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6365 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6362 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.41-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6362 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6363 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.23-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6363 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Setting up diff (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6360 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Setting up mktemp (8.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6360 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.22) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6360 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6361 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.5-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.4.dfsg-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Setting up readline-common (6.1-3) ... Selecting previously deselected package libreadline6. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Setting up libreadline6 (6.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6325 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6325 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Setting up libusb-0.1-4 (2:0.1.12-16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6325 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6326 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6334 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6334 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6378 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6378 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Setting up libattr1 (1:2.4.44-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6378 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Setting up libacl1 (2.2.49-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6379 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6379 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6396 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6396 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.5-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6395 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace librecode0 3.6-15 (using .../librecode0_3.6-17_amd64.deb) ... Unpacking replacement librecode0 ... Preparing to replace recode 3.6-15 (using .../recode_3.6-17_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package recode should be updated. Unpacking replacement recode ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up librecode0 (3.6-17) ... Setting up recode (3.6-17) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 3m21.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-yf', 'dist-upgrade'] 3m21.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'show', 'recode'] 3m22.6s DUMP: Package: recode Priority: optional Section: text Installed-Size: 772 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-17 Depends: libc6 (>= 2.3), librecode0 (>= 3.6), dpkg (>= 1.15.4) | install-info Filename: pool/main/r/recode/recode_3.6-17_amd64.deb Size: 197762 MD5sum: c99bccfee824bce1e7bfb0c3584a8978 SHA1: 25ee12258f05963b43ebaa8ab944ef6fb68df001 SHA256: e55a735f52e12164ad1d6fec20432dc25fa24d2c263e474b681ae5a846def6b3 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text 3m22.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'show', 'recode'] 3m22.6s INFO: apt-cache knows about the following packages: recode 3m22.6s INFO: Running scripts pre_install 3m22.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 3m22.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 3m22.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 3m22.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 3m22.8s DUMP: recode: Installed: 3.6-17 Candidate: 3.6-17 Version table: *** 3.6-17 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 3m22.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 3m22.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode'] 3m23.1s DUMP: Reading package lists... Building dependency tree... Reading state information... recode is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3m23.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode'] 3m23.1s INFO: Running scripts post_install 3m23.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 3m23.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 3m23.1s INFO: Running scripts post_distupgrade 3m23.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_base_cleanup'] 3m23.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_base_cleanup'] 3m23.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_exceptions'] 3m23.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_exceptions'] 3m23.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_experimental'] 3m23.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_experimental'] 3m23.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 3m23.2s DUMP: Enabling dpkg --force-unsafe-io. 3m23.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 3m23.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m23.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m23.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_squeeze-backports'] 3m23.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_squeeze-backports'] 3m23.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m23.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m23.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m23.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m23.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m23.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m23.7s INFO: Running scripts pre_install 3m23.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 3m23.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_database-server'] 3m23.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 3m23.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_exceptions'] 3m23.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 3m23.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_extras'] 3m23.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 3m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture'] 3m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 3m23.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 3m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy'] 3m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 3m23.8s DUMP: recode: Installed: 3.6-17 Candidate: 3.6-17 Version table: *** 3.6-17 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 3m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-cache', 'policy', 'recode'] 3m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode=3.6-17'] 3m24.1s DUMP: Reading package lists... Building dependency tree... Reading state information... recode is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3m24.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', '-y', 'install', 'recode=3.6-17'] 3m24.1s INFO: Running scripts post_install 3m24.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 3m24.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_install_exceptions'] 3m24.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m24.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m24.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--get-selections', '*'] 3m24.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install librecode0 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install recode install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 3m24.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--get-selections', '*'] 3m24.9s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', '-ac'] 3m25.5s DUMP: debsums: no md5sums for mawk 3m25.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', '-ac'] 3m25.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 3m25.5s DUMP: 0.12~bpo70+1 3m25.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 3m25.5s INFO: Running adequate version 0.12~bpo70+1 now. 3m25.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'recode'] 3m25.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'recode'] 3m25.6s INFO: Running scripts pre_remove 3m25.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 3m25.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 3m25.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m25.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m25.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 3m26.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 3m26.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m26.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m26.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m26.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m26.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_exceptions'] 3m26.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/pre_remove_exceptions'] 3m26.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'remove', '--no-install-recommends', 'librecode0', 'recode'] 3m26.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: librecode0 recode 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 2695 kB disk space will be freed. (Reading database ... 6457 files and directories currently installed.) Removing recode ... Removing librecode0 ... 3m26.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'remove', '--no-install-recommends', 'librecode0', 'recode'] 3m26.9s INFO: Running scripts post_remove 3m26.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions'] 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions'] 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions_lenny'] 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions_lenny'] 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions_squeeze'] 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_exceptions_squeeze'] 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_extras'] 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_remove_extras'] 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', 'librecode0'] 3m27.0s DUMP: dpkg: warning: ignoring request to remove librecode0 which isn't installed. 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', 'librecode0'] 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', 'recode'] 3m27.0s DUMP: dpkg: warning: ignoring request to remove recode which isn't installed. 3m27.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', 'recode'] 3m27.0s INFO: Running scripts post_purge 3m27.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_purge_exceptions'] 3m27.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'tmp/scripts/post_purge_exceptions'] 3m27.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', '--pending'] 3m27.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--purge', '--pending'] 3m27.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--remove', '--pending'] 3m27.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg', '--remove', '--pending'] 3m27.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m27.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m27.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg-divert', '--list'] 3m27.4s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 3m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'dpkg-divert', '--list'] 3m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'clean'] 3m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'apt-get', 'clean'] 3m28.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'umount', '/proc'] 3m28.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'umount', '/proc'] 3m28.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'umount', '/dev/pts'] 3m28.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpwpRXAi', 'umount', '/dev/pts'] 3m28.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m28.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpwpRXAi'] 3m28.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpwpRXAi 3m28.4s INFO: PASS: Upgrading between Debian distributions. 3m28.4s INFO: PASS: All tests. 3m28.4s INFO: piuparts run ends. ret=0 End: 2015-03-26 21:39:29 UTC