Start: 2013-04-15 03:25:22 UTC [lenny] Package: squashfs-source Priority: optional Section: admin Installed-Size: 108 Maintainer: Daniel Baumann Architecture: all Source: squashfs Version: 1:3.3-7 Replaces: kernel-patch-squashfs Depends: module-assistant, debhelper (>= 5), make, bzip2, zlib1g-dev Recommends: squashfs-tools Conflicts: kernel-patch-squashfs Filename: pool/main/s/squashfs/squashfs-source_3.3-7_all.deb Size: 53212 MD5sum: 71b8c2b7c99272453f47a9aae7b73947 SHA1: f121e2ed33cb3ba17a4331c816e7887e24258ee9 SHA256: da42d4215a3220b657ad9797fb4faa5ee3b620d127d01aa427b2e9001ea97e8e Description: Source for the squash filesystem Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. . This package provides the source code for the squashfs kernel modules. The squashfs-tools package is also required in order to make use of these modules. Kernel source or headers are required to compile these modules. Homepage: http://squashfs.sourceforge.net/ [squeeze] Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-debsums-errors --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt squashfs-source=None Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201304071036~0.50-24-gfd6cabe starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-debsums-errors' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'squashfs-source=None' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpDxeQ_j 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpDxeQ_j 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m3.5s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m3.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'mount', '-t', 'proc', 'proc', '/proc'] 0m3.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'mount', '-t', 'proc', 'proc', '/proc'] 0m3.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m3.5s DEBUG: Created policy-rc.d and chmodded it. 0m3.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'update'] 0m3.9s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m3.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'update'] 0m3.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', '-yf', 'dist-upgrade'] 0m4.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m4.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', '-yf', 'dist-upgrade'] 0m4.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpDxeQ_j/tmp/scripts/ 0m4.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpDxeQ_j/tmp/scripts/ 0m4.3s INFO: Running scripts post_setup 0m4.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_experimental'] 0m4.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_experimental'] 0m4.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_forbid_home'] 0m4.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_forbid_home'] 0m4.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m26.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (532kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m26.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m26.1s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpDxeQ_j to squeeze 0m26.1s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m26.1s INFO: Running scripts pre_distupgrade 0m26.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/pre_distupgrade_exceptions'] 0m26.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/pre_distupgrade_exceptions'] 0m26.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m26.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m26.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'update'] 0m35.2s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 1s (8821kB/s) Reading package lists... 0m35.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'update'] 0m35.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', '-yf', 'dist-upgrade'] 1m17.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (47.7MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Apr 15 03:26:25 UTC 2013. Universal Time is now: Mon Apr 15 03:26:25 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130415T0326.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m17.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', '-yf', 'dist-upgrade'] 1m17.3s INFO: Running scripts post_distupgrade 1m17.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_exceptions'] 1m17.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_exceptions'] 1m17.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_experimental'] 1m17.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_experimental'] 1m17.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m17.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m17.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m17.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m17.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m17.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m17.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m17.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m17.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'clean'] 1m17.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'apt-get', 'clean'] 1m18.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'dpkg', '--get-selections', '*'] 1m18.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m18.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'dpkg', '--get-selections', '*'] 1m18.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'dpkg-divert', '--list'] 1m18.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 1m18.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'dpkg-divert', '--list'] 1m18.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'umount', '/proc'] 1m18.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpDxeQ_j', 'umount', '/proc'] 1m18.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m19.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpDxeQ_j'] 1m19.1s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpDxeQ_j 1m19.1s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m19.1s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmp4KVO6N 1m19.1s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmp4KVO6N 1m19.1s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp4KVO6N', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m21.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmp4KVO6N', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 1m21.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'mount', '-t', 'proc', 'proc', '/proc'] 1m21.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'mount', '-t', 'proc', 'proc', '/proc'] 1m21.6s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 1m21.6s DEBUG: Created policy-rc.d and chmodded it. 1m21.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'update'] 1m22.0s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 1m22.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'update'] 1m22.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-yf', 'dist-upgrade'] 1m22.4s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m22.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-yf', 'dist-upgrade'] 1m22.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmp4KVO6N/tmp/scripts/ 1m47.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmp4KVO6N/tmp/scripts/ 1m47.4s INFO: Running scripts post_setup 1m47.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_experimental'] 1m47.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_experimental'] 1m47.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_forbid_home'] 1m47.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_forbid_home'] 1m47.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m49.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (319kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m49.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m49.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 1m49.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 1m49.4s INFO: Running scripts pre_test 1m49.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_test_root_password'] 1m49.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m49.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_test_root_password'] 1m49.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'show', 'squashfs-source'] 1m49.6s DUMP: Package: squashfs-source Priority: optional Section: admin Installed-Size: 108 Maintainer: Daniel Baumann Architecture: all Source: squashfs Version: 1:3.3-7 Replaces: kernel-patch-squashfs Depends: module-assistant, debhelper (>= 5), make, bzip2, zlib1g-dev Recommends: squashfs-tools Conflicts: kernel-patch-squashfs Filename: pool/main/s/squashfs/squashfs-source_3.3-7_all.deb Size: 53212 MD5sum: 71b8c2b7c99272453f47a9aae7b73947 SHA1: f121e2ed33cb3ba17a4331c816e7887e24258ee9 SHA256: da42d4215a3220b657ad9797fb4faa5ee3b620d127d01aa427b2e9001ea97e8e Description: Source for the squash filesystem Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. . This package provides the source code for the squashfs kernel modules. The squashfs-tools package is also required in order to make use of these modules. Kernel source or headers are required to compile these modules. Homepage: http://squashfs.sourceforge.net/ 1m49.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'show', 'squashfs-source'] 1m49.6s INFO: apt-cache knows about the following packages: squashfs-source 1m49.6s INFO: Running scripts pre_install 1m49.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_install_exceptions'] 1m49.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_install_exceptions'] 1m49.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m49.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m49.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'policy'] 1m49.9s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m49.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'policy'] 1m49.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'policy', 'squashfs-source'] 1m49.9s DUMP: squashfs-source: Installed: (none) Candidate: 1:3.3-7 Version table: 1:3.3-7 0 500 http://archive.debian.org lenny/main Packages 1m49.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'policy', 'squashfs-source'] 1m49.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-y', 'install', 'squashfs-source'] 2m15.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: binutils bsdmainutils bzip2 cpio debhelper dpkg-dev file gettext gettext-base groff-base html2text intltool-debian libc6-dev libgdbm3 libgomp1 libmagic1 libtimedate-perl linux-libc-dev make man-db module-assistant patch perl perl-modules po-debconf zlib1g-dev Suggested packages: binutils-doc cpp vacation wamerican wordlist whois bzip2-doc dh-make debian-keyring cvs gettext-doc groff glibc-doc manpages-dev make-doc less www-browser dialog whiptail ed diff-doc perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl Recommended packages: gcc c-compiler build-essential curl wget lynx netbase libmail-sendmail-perl libcompress-zlib-perl libmail-box-perl squashfs-tools The following NEW packages will be installed: binutils bsdmainutils bzip2 cpio debhelper dpkg-dev file gettext gettext-base groff-base html2text intltool-debian libc6-dev libgdbm3 libgomp1 libmagic1 libtimedate-perl linux-libc-dev make man-db module-assistant patch perl perl-modules po-debconf squashfs-source zlib1g-dev 0 upgraded, 27 newly installed, 0 to remove and 0 not upgraded. Need to get 22.7MB of archives. After this operation, 82.8MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main bsdmainutils 6.1.10 [179kB] Get:2 http://archive.debian.org lenny/main cpio 2.9-13lenny1 [183kB] Get:3 http://archive.debian.org lenny/main groff-base 1.18.1.1-21 [898kB] Get:4 http://archive.debian.org lenny/main libgdbm3 1.8.3-3 [23.4kB] Get:5 http://archive.debian.org lenny/main man-db 2.5.2-5 [1098kB] Get:6 http://archive.debian.org lenny/main libmagic1 4.26-1 [369kB] Get:7 http://archive.debian.org lenny/main file 4.26-1 [44.5kB] Get:8 http://archive.debian.org lenny/main gettext-base 0.17-4 [136kB] Get:9 http://archive.debian.org lenny/main patch 2.5.9-5 [99.0kB] Get:10 http://archive.debian.org lenny/main perl-modules 5.10.0-19lenny5 [3196kB] Get:11 http://archive.debian.org lenny/main perl 5.10.0-19lenny5 [5239kB] Get:12 http://archive.debian.org lenny/main binutils 2.18.1~cvs20080103-7 [2730kB] Get:13 http://archive.debian.org lenny/main bzip2 1.0.5-1+lenny1 [47.2kB] Get:14 http://archive.debian.org lenny/main make 3.81-5 [401kB] Get:15 http://archive.debian.org lenny/main libtimedate-perl 1.1600-9 [32.9kB] Get:16 http://archive.debian.org lenny/main dpkg-dev 1.14.31 [772kB] Get:17 http://archive.debian.org lenny/main html2text 1.3.2a-5 [95.9kB] Get:18 http://archive.debian.org lenny/main libgomp1 4.3.2-1.1 [15.5kB] Get:19 http://archive.debian.org lenny/main gettext 0.17-4 [2791kB] Get:20 http://archive.debian.org lenny/main intltool-debian 0.35.0+20060710.1 [30.8kB] Get:21 http://archive.debian.org lenny/main po-debconf 1.0.15 [237kB] Get:22 http://archive.debian.org lenny/main debhelper 7.0.15 [554kB] Get:23 http://archive.debian.org lenny/main linux-libc-dev 2.6.26-29 [759kB] Get:24 http://archive.debian.org lenny/main libc6-dev 2.7-18lenny7 [2491kB] Get:25 http://archive.debian.org lenny/main module-assistant 0.10.11.0 [103kB] Get:26 http://archive.debian.org lenny/main zlib1g-dev 1:1.2.3.3.dfsg-12 [163kB] Get:27 http://archive.debian.org lenny/main squashfs-source 1:3.3-7 [53.2kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 22.7MB in 2s (11.2MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package bsdmainutils. (Reading database ... 6013 files and directories currently installed.) Unpacking bsdmainutils (from .../bsdmainutils_6.1.10_amd64.deb) ... Selecting previously deselected package cpio. Unpacking cpio (from .../cpio_2.9-13lenny1_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.2-5_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_4.26-1_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-4_amd64.deb) ... Selecting previously deselected package patch. Unpacking patch (from .../patch_2.5.9-5_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny5_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-19lenny5_amd64.deb) ... Selecting previously deselected package binutils. Unpacking binutils (from .../binutils_2.18.1~cvs20080103-7_amd64.deb) ... Selecting previously deselected package bzip2. Unpacking bzip2 (from .../bzip2_1.0.5-1+lenny1_amd64.deb) ... Selecting previously deselected package make. Unpacking make (from .../archives/make_3.81-5_amd64.deb) ... Selecting previously deselected package libtimedate-perl. Unpacking libtimedate-perl (from .../libtimedate-perl_1.1600-9_all.deb) ... Selecting previously deselected package dpkg-dev. Unpacking dpkg-dev (from .../dpkg-dev_1.14.31_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_amd64.deb) ... Selecting previously deselected package libgomp1. Unpacking libgomp1 (from .../libgomp1_4.3.2-1.1_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-4_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.15_all.deb) ... Selecting previously deselected package linux-libc-dev. Unpacking linux-libc-dev (from .../linux-libc-dev_2.6.26-29_amd64.deb) ... Selecting previously deselected package libc6-dev. Unpacking libc6-dev (from .../libc6-dev_2.7-18lenny7_amd64.deb) ... Selecting previously deselected package module-assistant. Unpacking module-assistant (from .../module-assistant_0.10.11.0_all.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-12_amd64.deb) ... Selecting previously deselected package squashfs-source. Unpacking squashfs-source (from .../squashfs-source_1%3a3.3-7_all.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdmainutils (6.1.10) ... Setting up cpio (2.9-13lenny1) ... Setting up groff-base (1.18.1.1-21) ... Setting up libgdbm3 (1.8.3-3) ... Setting up man-db (2.5.2-5) ... Building database of manual pages ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up gettext-base (0.17-4) ... Setting up patch (2.5.9-5) ... Setting up binutils (2.18.1~cvs20080103-7) ... Setting up bzip2 (1.0.5-1+lenny1) ... Setting up make (3.81-5) ... Setting up html2text (1.3.2a-5) ... Setting up libgomp1 (4.3.2-1.1) ... Setting up gettext (0.17-4) ... Setting up linux-libc-dev (2.6.26-29) ... Setting up libc6-dev (2.7-18lenny7) ... Setting up zlib1g-dev (1:1.2.3.3.dfsg-12) ... Setting up perl-modules (5.10.0-19lenny5) ... Setting up perl (5.10.0-19lenny5) ... Setting up libtimedate-perl (1.1600-9) ... Setting up dpkg-dev (1.14.31) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15) ... Setting up debhelper (7.0.15) ... Setting up module-assistant (0.10.11.0) ... Setting up squashfs-source (1:3.3-7) ... 2m15.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-y', 'install', 'squashfs-source'] 2m15.1s INFO: Running scripts post_install 2m15.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 2m15.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 2m15.4s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmp4KVO6N to squeeze 2m15.4s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 2m15.4s INFO: Running scripts pre_distupgrade 2m15.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_distupgrade_exceptions'] 2m15.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_distupgrade_exceptions'] 2m15.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 2m15.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 2m15.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'update'] 2m24.6s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [6540kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [53.0kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [102kB] Fetched 6796kB in 3s (2055kB/s) Reading package lists... 2m24.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'update'] 2m24.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-yf', 'dist-upgrade'] 12m42.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libc-dev-bin libcroco3 libdb4.7 libdb4.8 libdpkg-perl libglib2.0-0 liblzma2 libncursesw5 libpcre3 libreadline6 libudev0 libunistring0 libxml2 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash binutils bsdmainutils bsdutils bzip2 coreutils cpio debconf debconf-i18n debhelper debian-archive-keyring debianutils diff dpkg dpkg-dev e2fslibs e2fsprogs file findutils gcc-4.3-base gettext gettext-base gnupg gpgv grep groff-base gzip hostname html2text initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libc6-dev libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 libgdbm3 libgomp1 liblocale-gettext-perl libmagic1 libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libtimedate-perl libusb-0.1-4 libuuid1 linux-libc-dev login lsb-base make makedev man-db mawk mktemp module-assistant mount ncurses-base ncurses-bin passwd patch perl perl-base perl-modules po-debconf procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g zlib1g-dev 94 upgraded, 21 newly installed, 0 to remove and 0 not upgraded. Need to get 62.6MB of archives. After this operation, 28.0MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-dev-bin 2.11.3-4 [210kB] Get:3 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:4 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:5 http://piatti.debian.org squeeze/main binutils 2.20.1-16 [3993kB] Get:6 http://piatti.debian.org squeeze/main libc6-dev 2.11.3-4 [2593kB] Get:7 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:8 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:9 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:10 http://piatti.debian.org squeeze/main zlib1g-dev 1:1.2.3.4.dfsg-3 [192kB] Get:11 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:12 http://piatti.debian.org squeeze/main linux-libc-dev 2.6.32-48 [842kB] Get:13 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:14 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:15 http://piatti.debian.org squeeze/main perl-modules 5.10.1-17squeeze5 [3491kB] Get:16 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB] Get:17 http://piatti.debian.org squeeze/main perl 5.10.1-17squeeze5 [4441kB] Get:18 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:19 http://piatti.debian.org squeeze/main bzip2 1.0.5-6+squeeze1 [50.5kB] Get:20 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:21 http://piatti.debian.org squeeze/main libgdbm3 1.8.3-9 [46.2kB] Get:22 http://piatti.debian.org squeeze/main libtimedate-perl 1.2000-1 [41.2kB] Get:23 http://piatti.debian.org squeeze/main dpkg-dev 1.15.8.13 [813kB] Get:24 http://piatti.debian.org squeeze/main libdpkg-perl 1.15.8.13 [695kB] Get:25 http://piatti.debian.org squeeze/main patch 2.6-2 [120kB] Get:26 http://piatti.debian.org squeeze/main make 3.81-8 [398kB] Get:27 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:28 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:29 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:30 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:31 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:32 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:33 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:34 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:35 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:36 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:37 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:38 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:39 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:40 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:41 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:42 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:43 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:44 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:45 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:46 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:47 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:48 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:49 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:50 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:51 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:52 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:53 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:54 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:55 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:56 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:57 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:58 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:59 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:60 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:61 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:62 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:63 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:64 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:65 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:66 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:67 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:68 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:69 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:70 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:71 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:72 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:73 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:74 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:75 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:76 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:77 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:78 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:79 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:80 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:81 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:82 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:83 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:84 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:85 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:86 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:87 http://piatti.debian.org squeeze/main libgomp1 4.4.5-8 [25.3kB] Get:88 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:89 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:90 http://piatti.debian.org squeeze/main bsdmainutils 8.0.13 [203kB] Get:91 http://piatti.debian.org squeeze/main cpio 2.11-4 [272kB] Get:92 http://piatti.debian.org squeeze/main groff-base 1.20.1-10 [1123kB] Get:93 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:94 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:95 http://piatti.debian.org squeeze/main man-db 2.5.7-8 [1543kB] Get:96 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:97 http://piatti.debian.org squeeze/main file 5.04-5+squeeze2 [50.0kB] Get:98 http://piatti.debian.org squeeze/main libmagic1 5.04-5+squeeze2 [235kB] Get:99 http://piatti.debian.org squeeze/main gettext-base 0.18.1.1-3 [153kB] Get:100 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:101 http://piatti.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:102 http://piatti.debian.org squeeze/main libxml2 2.7.8.dfsg-2+squeeze6 [873kB] Get:103 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:104 http://piatti.debian.org squeeze/main html2text 1.3.2a-15 [103kB] Get:105 http://piatti.debian.org squeeze/main libglib2.0-0 2.24.2-1 [1122kB] Get:106 http://piatti.debian.org squeeze/main libcroco3 0.6.2-1 [125kB] Get:107 http://piatti.debian.org squeeze/main libunistring0 0.9.3-3 [437kB] Get:108 http://piatti.debian.org squeeze/main gettext 0.18.1.1-3 [2076kB] Get:109 http://piatti.debian.org squeeze/main po-debconf 1.0.16+nmu1 [223kB] Get:110 http://piatti.debian.org squeeze/main debhelper 8.0.0 [454kB] Get:111 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:112 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:113 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:114 http://piatti.debian.org squeeze/main module-assistant 0.11.3 [114kB] Get:115 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 62.6MB in 2s (23.4MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10027 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-dev-bin. (Reading database ... 10029 files and directories currently installed.) Unpacking libc-dev-bin (from .../libc-dev-bin_2.11.3-4_amd64.deb) ... Replacing files in old package libc6-dev ... Selecting previously deselected package gcc-4.4-base. Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10043 files and directories currently installed.) Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10043 files and directories currently installed.) Preparing to replace binutils 2.18.1~cvs20080103-7 (using .../binutils_2.20.1-16_amd64.deb) ... Unpacking replacement binutils ... Preparing to replace libc6-dev 2.7-18lenny7 (using .../libc6-dev_2.11.3-4_amd64.deb) ... Unpacking replacement libc6-dev ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10092 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10092 files and directories currently installed.) Preparing to replace zlib1g-dev 1:1.2.3.3.dfsg-12 (using .../zlib1g-dev_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g-dev ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10096 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.26-29 (using .../linux-libc-dev_2.6.32-48_amd64.deb) ... Unpacking replacement linux-libc-dev ... Selecting previously deselected package liblzma2. Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 10117 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10159 files and directories currently installed.) Preparing to replace perl-modules 5.10.0-19lenny5 (using .../perl-modules_5.10.1-17squeeze5_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Preparing to replace perl 5.10.0-19lenny5 (using .../perl_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10331 files and directories currently installed.) Preparing to replace bzip2 1.0.5-1+lenny1 (using .../bzip2_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement bzip2 ... Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10331 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace libtimedate-perl 1.1600-9 (using .../libtimedate-perl_1.2000-1_all.deb) ... Unpacking replacement libtimedate-perl ... Preparing to replace dpkg-dev 1.14.31 (using .../dpkg-dev_1.15.8.13_all.deb) ... Unpacking replacement dpkg-dev ... Selecting previously deselected package libdpkg-perl. Unpacking libdpkg-perl (from .../libdpkg-perl_1.15.8.13_all.deb) ... Replacing files in old package dpkg ... Preparing to replace patch 2.5.9-5 (using .../archives/patch_2.6-2_amd64.deb) ... Unpacking replacement patch ... Preparing to replace make 3.81-5 (using .../archives/make_3.81-8_amd64.deb) ... Unpacking replacement make ... Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 10461 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10468 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 10464 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10476 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10476 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10499 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 10525 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10547 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10547 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10547 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10548 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10548 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10548 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10563 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10567 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10567 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 10567 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10571 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10577 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10574 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10574 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10575 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10578 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10580 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10580 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Apr 15 03:37:31 UTC 2013. Universal Time is now: Mon Apr 15 03:37:31 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10586 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10590 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10591 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 10594 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10623 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130415T0337.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10624 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10642 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10645 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10647 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10649 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10649 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10655 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10652 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10652 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10653 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10653 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10650 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10650 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10650 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10651 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10602 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 10602 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10615 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10615 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10616 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10624 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10624 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10668 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10668 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10668 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10669 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10669 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10686 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10686 files and directories currently installed.) Preparing to replace libgomp1 4.3.2-1.1 (using .../libgomp1_4.4.5-8_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 10685 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Preparing to replace bsdmainutils 6.1.10 (using .../bsdmainutils_8.0.13_amd64.deb) ... Unpacking replacement bsdmainutils ... Preparing to replace cpio 2.9-13lenny1 (using .../archives/cpio_2.11-4_amd64.deb) ... Unpacking replacement cpio ... Preparing to replace groff-base 1.18.1.1-21 (using .../groff-base_1.20.1-10_amd64.deb) ... Unpacking replacement groff-base ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace man-db 2.5.2-5 (using .../man-db_2.5.7-8_amd64.deb) ... Unpacking replacement man-db ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace file 4.26-1 (using .../file_5.04-5+squeeze2_amd64.deb) ... Unpacking replacement file ... Preparing to replace libmagic1 4.26-1 (using .../libmagic1_5.04-5+squeeze2_amd64.deb) ... Unpacking replacement libmagic1 ... Preparing to replace gettext-base 0.17-4 (using .../gettext-base_0.18.1.1-3_amd64.deb) ... Unpacking replacement gettext-base ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2+squeeze6_amd64.deb) ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace html2text 1.3.2a-5 (using .../html2text_1.3.2a-15_amd64.deb) ... Unpacking replacement html2text ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-3_amd64.deb) ... Preparing to replace gettext 0.17-4 (using .../gettext_0.18.1.1-3_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gettext should be updated. Unpacking replacement gettext ... Preparing to replace po-debconf 1.0.15 (using .../po-debconf_1.0.16+nmu1_all.deb) ... Unpacking replacement po-debconf ... Preparing to replace debhelper 7.0.15 (using .../debhelper_8.0.0_all.deb) ... Unpacking replacement debhelper ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace module-assistant 0.10.11.0 (using .../module-assistant_0.11.3_all.deb) ... Unpacking replacement module-assistant ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-dev-bin (2.11.3-4) ... Setting up binutils (2.20.1-16) ... Setting up linux-libc-dev (2.6.32-48) ... Setting up libc6-dev (2.11.3-4) ... Setting up zlib1g-dev (1:1.2.3.4.dfsg-3) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up bzip2 (1.0.5-6+squeeze1) ... Setting up patch (2.6-2) ... Setting up make (3.81-8) ... Setting up mawk (1.3.3-15) ... Setting up libgomp1 (4.4.5-8) ... Setting up adduser (3.112+nmu2) ... Setting up bsdmainutils (8.0.13) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up cpio (2.11-4) ... Setting up groff-base (1.20.1-10) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up man-db (2.5.7-8) ... Installing new version of config file /etc/manpath.config ... Installing new version of config file /etc/cron.daily/man-db ... Installing new version of config file /etc/cron.weekly/man-db ... Updating database of manual pages ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libmagic1 (5.04-5+squeeze2) ... Setting up file (5.04-5+squeeze2) ... Setting up gettext-base (0.18.1.1-3) ... Setting up libdb4.6 (4.6.21-16) ... Setting up libpcre3 (8.02-1.1) ... Setting up libxml2 (2.7.8.dfsg-2+squeeze6) ... Setting up ucf (3.0025+nmu1) ... Setting up html2text (1.3.2a-15) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-3) ... Setting up gettext (0.18.1.1-3) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... Setting up perl-modules (5.10.1-17squeeze5) ... Setting up perl (5.10.1-17squeeze5) ... Setting up libtimedate-perl (1.2000-1) ... Setting up libdpkg-perl (1.15.8.13) ... Setting up dpkg-dev (1.15.8.13) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.0.0) ... Setting up module-assistant (0.11.3) ... 12m42.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', '-yf', 'dist-upgrade'] 12m42.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'show', 'squashfs-source'] 12m44.5s DUMP: Package: squashfs-source Status: install ok installed Priority: optional Section: admin Installed-Size: 108 Maintainer: Daniel Baumann Architecture: all Source: squashfs Version: 1:3.3-7 Replaces: kernel-patch-squashfs Depends: module-assistant, debhelper (>= 5), make, bzip2, zlib1g-dev Recommends: squashfs-tools Conflicts: kernel-patch-squashfs Description: Source for the squash filesystem Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. . This package provides the source code for the squashfs kernel modules. The squashfs-tools package is also required in order to make use of these modules. Kernel source or headers are required to compile these modules. Homepage: http://squashfs.sourceforge.net/ 12m44.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-cache', 'show', 'squashfs-source'] 12m44.5s INFO: apt-cache does not know about any of the requested packages 12m44.5s INFO: Running scripts post_distupgrade 12m44.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_exceptions'] 12m44.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_exceptions'] 12m44.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_experimental'] 12m44.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_experimental'] 12m44.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_hack_debsums'] 12m44.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_hack_debsums'] 12m44.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 12m44.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 12m44.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m45.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m45.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m45.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m45.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m46.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m46.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--get-selections', '*'] 12m46.2s DUMP: adduser install apt install base-files install base-passwd install bash install binutils install bsdmainutils install bsdutils install bzip2 install coreutils install cpio install dash install debconf install debconf-i18n install debhelper install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install dpkg-dev install e2fslibs install e2fsprogs install file install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gettext install gettext-base install gnupg install gpgv install grep install groff-base install gzip install hostname install html2text install initscripts install insserv install intltool-debian install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc-dev-bin install libc6 install libc6-dev install libcomerr2 install libcroco3 install libdb4.6 install libdb4.7 install libdb4.8 install libdevmapper1.02.1 install libdpkg-perl install libgcc1 install libgdbm3 install libglib2.0-0 install libgomp1 install liblocale-gettext-perl install liblzma2 install libmagic1 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtimedate-perl install libudev0 install libunistring0 install libusb-0.1-4 install libuuid1 install libxml2 install linux-libc-dev install login install lsb-base install lzma install make install makedev install man-db install mawk install mktemp install module-assistant install mount install ncurses-base install ncurses-bin install passwd install patch install perl install perl-base install perl-modules install po-debconf install procps install readline-common install sed install sensible-utils install squashfs-source install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install zlib1g-dev install 12m46.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--get-selections', '*'] 12m47.4s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmp4KVO6N', '-ac'] 12m48.9s DUMP: debsums: no md5sums for binutils debsums: no md5sums for mawk 12m48.9s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmp4KVO6N', '-ac'] 12m48.9s INFO: Running scripts pre_remove 12m48.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 12m48.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 12m48.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 12m49.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 12m49.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 12m49.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 12m49.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_exceptions'] 12m49.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/pre_remove_exceptions'] 12m49.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'remove', 'libglib2.0-0', 'libgomp1', 'libxml2', 'bsdmainutils', 'libmagic1', 'file', 'linux-libc-dev', 'module-assistant', 'bzip2', 'perl-modules', 'make', 'gettext', 'perl', 'html2text', 'libgdbm3', 'man-db', 'libtimedate-perl', 'groff-base', 'libunistring0', 'libdpkg-perl', 'debhelper', 'libpcre3', 'cpio', 'dpkg-dev', 'intltool-debian', 'libc6-dev', 'patch', 'libcroco3', 'libdb4.7', 'libc-dev-bin', 'gettext-base', 'zlib1g-dev', 'po-debconf', 'binutils', 'squashfs-source'] 12m50.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: binutils bsdmainutils bzip2 cpio debhelper dpkg-dev file gettext gettext-base groff-base html2text intltool-debian libc-dev-bin libc6-dev libcroco3 libdb4.7 libdpkg-perl libgdbm3 libglib2.0-0 libgomp1 libmagic1 libpcre3 libtimedate-perl libunistring0 libxml2 linux-libc-dev make man-db module-assistant patch perl perl-modules po-debconf squashfs-source zlib1g-dev 0 upgraded, 0 newly installed, 35 to remove and 0 not upgraded. After this operation, 98.0 MB disk space will be freed. (Reading database ... 10870 files and directories currently installed.) Removing squashfs-source ... Removing debhelper ... Removing dpkg-dev ... Removing binutils ... Removing man-db ... Removing bsdmainutils ... Removing module-assistant ... Removing bzip2 ... Removing cpio ... Removing file ... Removing po-debconf ... Removing intltool-debian ... Removing gettext ... Removing gettext-base ... Removing groff-base ... Removing html2text ... Removing zlib1g-dev ... Removing libc6-dev ... Removing libc-dev-bin ... Removing libcroco3 ... Removing libdpkg-perl ... Removing libtimedate-perl ... Removing libglib2.0-0 ... Removing libgomp1 ... Removing libmagic1 ... Removing libpcre3 ... Removing libunistring0 ... Removing libxml2 ... Removing linux-libc-dev ... Removing make ... Removing patch ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 12m50.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'remove', 'libglib2.0-0', 'libgomp1', 'libxml2', 'bsdmainutils', 'libmagic1', 'file', 'linux-libc-dev', 'module-assistant', 'bzip2', 'perl-modules', 'make', 'gettext', 'perl', 'html2text', 'libgdbm3', 'man-db', 'libtimedate-perl', 'groff-base', 'libunistring0', 'libdpkg-perl', 'debhelper', 'libpcre3', 'cpio', 'dpkg-dev', 'intltool-debian', 'libc6-dev', 'patch', 'libcroco3', 'libdb4.7', 'libc-dev-bin', 'gettext-base', 'zlib1g-dev', 'po-debconf', 'binutils', 'squashfs-source'] 12m50.9s INFO: Running scripts post_remove 12m50.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_remove_exceptions'] 12m50.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_remove_exceptions'] 12m50.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', 'libglib2.0-0', 'libgomp1', 'libxml2', 'bsdmainutils', 'libmagic1', 'file', 'linux-libc-dev', 'module-assistant', 'bzip2', 'perl-modules', 'make', 'gettext', 'perl', 'html2text', 'libgdbm3', 'man-db', 'libtimedate-perl', 'groff-base', 'libunistring0', 'libdpkg-perl', 'debhelper', 'libpcre3', 'cpio', 'dpkg-dev', 'intltool-debian', 'libc6-dev', 'patch', 'libcroco3', 'libdb4.7', 'libc-dev-bin', 'gettext-base', 'zlib1g-dev', 'po-debconf', 'binutils'] 12m51.7s DUMP: (Reading database ... 6443 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libgomp1 ... Purging configuration files for libgomp1 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing file ... Purging configuration files for file ... dpkg: warning: ignoring request to remove linux-libc-dev which isn't installed. Removing module-assistant ... Purging configuration files for module-assistant ... dpkg: warning: ignoring request to remove bzip2 which isn't installed. Removing perl-modules ... Purging configuration files for perl-modules ... dpkg: warning: ignoring request to remove make which isn't installed. dpkg: warning: ignoring request to remove gettext which isn't installed. dpkg: warning: ignoring request to remove perl which isn't installed. Removing html2text ... Purging configuration files for html2text ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. dpkg: warning: ignoring request to remove libtimedate-perl which isn't installed. Removing groff-base ... Purging configuration files for groff-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... dpkg: warning: ignoring request to remove libdpkg-perl which isn't installed. dpkg: warning: ignoring request to remove debhelper which isn't installed. Removing libpcre3 ... Purging configuration files for libpcre3 ... dpkg: warning: ignoring request to remove cpio which isn't installed. Removing dpkg-dev ... Purging configuration files for dpkg-dev ... dpkg: warning: ignoring request to remove intltool-debian which isn't installed. dpkg: warning: ignoring request to remove libc6-dev which isn't installed. dpkg: warning: ignoring request to remove patch which isn't installed. Removing libcroco3 ... Purging configuration files for libcroco3 ... dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. dpkg: warning: ignoring request to remove libc-dev-bin which isn't installed. dpkg: warning: ignoring request to remove gettext-base which isn't installed. dpkg: warning: ignoring request to remove zlib1g-dev which isn't installed. dpkg: warning: ignoring request to remove po-debconf which isn't installed. Removing binutils ... Purging configuration files for binutils ... 12m51.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', 'libglib2.0-0', 'libgomp1', 'libxml2', 'bsdmainutils', 'libmagic1', 'file', 'linux-libc-dev', 'module-assistant', 'bzip2', 'perl-modules', 'make', 'gettext', 'perl', 'html2text', 'libgdbm3', 'man-db', 'libtimedate-perl', 'groff-base', 'libunistring0', 'libdpkg-perl', 'debhelper', 'libpcre3', 'cpio', 'dpkg-dev', 'intltool-debian', 'libc6-dev', 'patch', 'libcroco3', 'libdb4.7', 'libc-dev-bin', 'gettext-base', 'zlib1g-dev', 'po-debconf', 'binutils'] 12m51.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', 'squashfs-source'] 12m51.7s DUMP: dpkg: warning: ignoring request to remove squashfs-source which isn't installed. 12m51.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', 'squashfs-source'] 12m51.7s INFO: Running scripts post_purge 12m51.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_purge_exceptions'] 12m51.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'tmp/scripts/post_purge_exceptions'] 12m51.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', '--pending'] 12m51.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--purge', '--pending'] 12m51.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--remove', '--pending'] 12m51.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg', '--remove', '--pending'] 12m51.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m52.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m52.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg-divert', '--list'] 12m52.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 12m52.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'dpkg-divert', '--list'] 12m52.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'clean'] 12m52.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'apt-get', 'clean'] 12m53.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'umount', '/proc'] 12m53.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmp4KVO6N', 'umount', '/proc'] 12m53.4s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m53.7s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmp4KVO6N'] 12m53.7s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmp4KVO6N 12m53.8s INFO: PASS: Upgrading between Debian distributions. 12m53.8s INFO: PASS: All tests. 12m53.8s INFO: piuparts run ends. ret=0 End: 2013-04-15 03:38:17 UTC