Start: 2013-03-28 02:28:02 UTC [lenny] Package: tp-smapi-modules-2.6.26-2-vserver-amd64 Priority: optional Section: admin Installed-Size: 164 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-modules-extra-2.6 (2.6.26-6+lenny3) Version: 2.6.26+0.37-6+lenny3 Provides: tp-smapi-modules Depends: linux-modules-2.6.26-2-vserver-amd64 Filename: pool/main/l/linux-modules-extra-2.6/tp-smapi-modules-2.6.26-2-vserver-amd64_2.6.26+0.37-6+lenny3_amd64.deb Size: 26646 MD5sum: cc25012eb8ec7ed3782fc4f49a637d1e SHA1: 6767fd5cedefc7b2dfd10472c7c8e79cd334f137 SHA256: 82b192e5bc82ab6dce7e6666efd93e9457ddf3d189f7babe774592ef525d0a93 Description: ThinkPad hardware/firmware access for Linux 2.6.26 on AMD64 This package provides the ThinkPad hardware/firmware access modules for the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and Intel machines. . The tp_smapi kernel module exposes some features of the ThinkPad hardware/firmware via a sysfs interface. Currently, the main implemented functionality is control of battery charging and extended battery status. The underlying hardware interfaces are SMAPI and direct access to the embedded controller. [squeeze] Executing: sudo env PYTHONPATH=/org/piuparts.debian.org/lib/python2.6/dist-packages:/org/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /org/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io --no-eatmydata -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror http://piatti.debian.org/debian/ --tmpdir /org/piuparts.debian.org/tmp -b /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz -d lenny -d squeeze --apt tp-smapi-modules-2.6.26-2-vserver-amd64=None Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.51~201303251306~0.50-22-g27c4826 starting up. 0m0.0s INFO: Command line arguments: '/org/piuparts.debian.org/sbin/piuparts' '--skip-logrotatefiles-test' '--warn-on-others' '--scriptsdir' '/etc/piuparts/scripts' '--warn-on-leftovers-after-purge' '--dpkg-noforce-unsafe-io' '--no-eatmydata' '-i' '/etc/shells' '--scriptsdir' '/etc/piuparts/scripts-squeeze' '--warn-on-debsums-errors' '--mirror' 'http://piatti.debian.org/debian/' '--tmpdir' '/org/piuparts.debian.org/tmp' '-b' '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz' '-d' 'lenny' '-d' 'squeeze' '--apt' 'tp-smapi-modules-2.6.26-2-vserver-amd64=None' 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpF24unF 0m0.0s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpF24unF 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpF24unF', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m7.5s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpF24unF', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m7.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'mount', '-t', 'proc', 'proc', '/proc'] 0m7.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'mount', '-t', 'proc', 'proc', '/proc'] 0m7.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m7.5s DEBUG: Created policy-rc.d and chmodded it. 0m7.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'update'] 0m7.9s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m7.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'update'] 0m7.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', '-yf', 'dist-upgrade'] 0m8.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m8.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', '-yf', 'dist-upgrade'] 0m8.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpF24unF/tmp/scripts/ 0m11.9s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpF24unF/tmp/scripts/ 0m11.9s INFO: Running scripts post_setup 0m11.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_experimental'] 0m11.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_experimental'] 0m11.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_forbid_home'] 0m11.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_forbid_home'] 0m11.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m13.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (704kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m13.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m13.2s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpF24unF to squeeze 0m13.2s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 0m13.2s INFO: Running scripts pre_distupgrade 0m13.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/pre_distupgrade_exceptions'] 0m13.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/pre_distupgrade_exceptions'] 0m13.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m13.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m13.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'update'] 0m16.1s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.0MB/s) Reading package lists... 0m16.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'update'] 0m16.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', '-yf', 'dist-upgrade'] 0m45.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 12.9MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:63 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:64 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 0s (47.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6013 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6015 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 6016 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6024 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 6024 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 6034 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6076 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 6082 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6089 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 6085 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6097 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6120 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 6146 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6168 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6216 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6217 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6234 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6238 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 6238 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6242 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6248 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6245 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6246 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6249 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6251 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Mar 28 02:28:35 UTC 2013. Universal Time is now: Thu Mar 28 02:28:35 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6257 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6261 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6262 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 6265 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6294 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130328T0228.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6313 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6316 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6318 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6320 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6326 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6323 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6324 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6321 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6322 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6273 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 6273 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6286 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6287 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6295 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6339 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6340 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6357 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 6356 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', '-yf', 'dist-upgrade'] 0m45.4s INFO: Running scripts post_distupgrade 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_exceptions'] 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_exceptions'] 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_experimental'] 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_experimental'] 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m45.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_hack_debsums'] 0m45.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m45.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 0m45.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m45.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m45.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m46.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m46.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'clean'] 0m46.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'apt-get', 'clean'] 0m46.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'dpkg', '--get-selections', '*'] 0m46.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m46.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'dpkg', '--get-selections', '*'] 0m46.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'dpkg-divert', '--list'] 0m46.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m46.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'dpkg-divert', '--list'] 0m46.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'umount', '/proc'] 0m46.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpF24unF', 'umount', '/proc'] 0m46.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m47.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpF24unF'] 0m47.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpF24unF 0m47.2s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 0m47.2s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpARAECL 0m47.2s DEBUG: Unpacking /org/piuparts.debian.org/slave/basetgz/lenny.tar.gz into /org/piuparts.debian.org/tmp/tmpARAECL 0m47.2s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpARAECL', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m55.4s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpARAECL', '-zxf', '/org/piuparts.debian.org/slave/basetgz/lenny.tar.gz'] 0m55.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'mount', '-t', 'proc', 'proc', '/proc'] 0m55.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'mount', '-t', 'proc', 'proc', '/proc'] 0m55.4s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main deb http://archive.debian.org/debian lenny contrib deb http://archive.debian.org/debian lenny non-free 0m55.4s DEBUG: Created policy-rc.d and chmodded it. 0m55.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'update'] 0m55.9s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Ign http://archive.debian.org lenny/main Packages/DiffIndex Ign http://archive.debian.org lenny/contrib Packages/DiffIndex Ign http://archive.debian.org lenny/non-free Packages/DiffIndex Hit http://archive.debian.org lenny/main Packages Hit http://archive.debian.org lenny/contrib Packages Hit http://archive.debian.org lenny/non-free Packages Reading package lists... 0m55.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'update'] 0m55.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-yf', 'dist-upgrade'] 0m56.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m56.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-yf', 'dist-upgrade'] 0m56.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /org/piuparts.debian.org/tmp/tmpARAECL/tmp/scripts/ 0m56.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /org/piuparts.debian.org/tmp/tmpARAECL/tmp/scripts/ 0m56.3s INFO: Running scripts post_setup 0m56.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_experimental'] 0m56.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_experimental'] 0m56.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_forbid_home'] 0m56.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_forbid_home'] 0m56.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m57.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (635kB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package adduser. (Reading database ... 5915 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Can not write log, openpty() failed (/dev/pts not mounted?) Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m57.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m57.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 0m57.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 0m57.9s INFO: Running scripts pre_test 0m57.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_test_root_password'] 0m58.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m58.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_test_root_password'] 0m58.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'show', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 0m59.6s DUMP: Package: tp-smapi-modules-2.6.26-2-vserver-amd64 Priority: optional Section: admin Installed-Size: 164 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-modules-extra-2.6 (2.6.26-6+lenny3) Version: 2.6.26+0.37-6+lenny3 Provides: tp-smapi-modules Depends: linux-modules-2.6.26-2-vserver-amd64 Filename: pool/main/l/linux-modules-extra-2.6/tp-smapi-modules-2.6.26-2-vserver-amd64_2.6.26+0.37-6+lenny3_amd64.deb Size: 26646 MD5sum: cc25012eb8ec7ed3782fc4f49a637d1e SHA1: 6767fd5cedefc7b2dfd10472c7c8e79cd334f137 SHA256: 82b192e5bc82ab6dce7e6666efd93e9457ddf3d189f7babe774592ef525d0a93 Description: ThinkPad hardware/firmware access for Linux 2.6.26 on AMD64 This package provides the ThinkPad hardware/firmware access modules for the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and Intel machines. . The tp_smapi kernel module exposes some features of the ThinkPad hardware/firmware via a sysfs interface. Currently, the main implemented functionality is control of battery charging and extended battery status. The underlying hardware interfaces are SMAPI and direct access to the embedded controller. 0m59.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'show', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 0m59.6s INFO: apt-cache knows about the following packages: tp-smapi-modules-2.6.26-2-vserver-amd64 0m59.6s INFO: Running scripts pre_install 0m59.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_install_exceptions'] 0m59.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_install_exceptions'] 0m59.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m59.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m59.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'policy'] 0m59.9s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/non-free Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=non-free origin archive.debian.org 500 http://archive.debian.org lenny/contrib Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=contrib origin archive.debian.org 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 0m59.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'policy'] 0m59.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'policy', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 0m59.9s DUMP: tp-smapi-modules-2.6.26-2-vserver-amd64: Installed: (none) Candidate: 2.6.26+0.37-6+lenny3 Version table: 2.6.26+0.37-6+lenny3 0 500 http://archive.debian.org lenny/main Packages 0m59.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'policy', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 0m59.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-y', 'install', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 1m34.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: cpio initramfs-tools klibc-utils libklibc libvolume-id0 linux-image-2.6.26-2-vserver-amd64 module-init-tools udev Suggested packages: linux-doc-2.6.26 grub lilo Recommended packages: busybox busybox-initramfs util-vserver The following NEW packages will be installed: cpio initramfs-tools klibc-utils libklibc libvolume-id0 linux-image-2.6.26-2-vserver-amd64 module-init-tools tp-smapi-modules-2.6.26-2-vserver-amd64 udev 0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 21.9MB of archives. After this operation, 83.0MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main module-init-tools 3.4-1 [77.8kB] Get:2 http://archive.debian.org lenny/main libklibc 1.5.12-2lenny1 [46.5kB] Get:3 http://archive.debian.org lenny/main klibc-utils 1.5.12-2lenny1 [180kB] Get:4 http://archive.debian.org lenny/main cpio 2.9-13lenny1 [183kB] Get:5 http://archive.debian.org lenny/main libvolume-id0 0.125-7+lenny3 [78.2kB] Get:6 http://archive.debian.org lenny/main udev 0.125-7+lenny3 [267kB] Get:7 http://archive.debian.org lenny/main initramfs-tools 0.92o [75.3kB] Get:8 http://archive.debian.org lenny/main linux-image-2.6.26-2-vserver-amd64 2.6.26-29 [21.0MB] Get:9 http://archive.debian.org lenny/main tp-smapi-modules-2.6.26-2-vserver-amd64 2.6.26+0.37-6+lenny3 [26.6kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 21.9MB in 1s (12.5MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package module-init-tools. (Reading database ... 6013 files and directories currently installed.) Unpacking module-init-tools (from .../module-init-tools_3.4-1_amd64.deb) ... Selecting previously deselected package libklibc. Unpacking libklibc (from .../libklibc_1.5.12-2lenny1_amd64.deb) ... Selecting previously deselected package klibc-utils. Unpacking klibc-utils (from .../klibc-utils_1.5.12-2lenny1_amd64.deb) ... Selecting previously deselected package cpio. Unpacking cpio (from .../cpio_2.9-13lenny1_amd64.deb) ... Selecting previously deselected package libvolume-id0. Unpacking libvolume-id0 (from .../libvolume-id0_0.125-7+lenny3_amd64.deb) ... Selecting previously deselected package udev. Unpacking udev (from .../udev_0.125-7+lenny3_amd64.deb) ... Selecting previously deselected package initramfs-tools. Unpacking initramfs-tools (from .../initramfs-tools_0.92o_all.deb) ... /dev/cciss/c0d0p3: error opening volume Selecting previously deselected package linux-image-2.6.26-2-vserver-amd64. Unpacking linux-image-2.6.26-2-vserver-amd64 (from .../linux-image-2.6.26-2-vserver-amd64_2.6.26-29_amd64.deb) ... Done. Selecting previously deselected package tp-smapi-modules-2.6.26-2-vserver-amd64. Unpacking tp-smapi-modules-2.6.26-2-vserver-amd64 (from .../tp-smapi-modules-2.6.26-2-vserver-amd64_2.6.26+0.37-6+lenny3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up module-init-tools (3.4-1) ... Setting up libklibc (1.5.12-2lenny1) ... Setting up klibc-utils (1.5.12-2lenny1) ... Setting up cpio (2.9-13lenny1) ... Setting up libvolume-id0 (0.125-7+lenny3) ... Setting up udev (0.125-7+lenny3) ... unable to open device '/class/net/*' A chroot environment has been detected, udev not started. Setting up initramfs-tools (0.92o) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-2.6.26-2-vserver-amd64 (2.6.26-29) ... Running depmod. Running mkinitramfs-kpkg. Setting up tp-smapi-modules-2.6.26-2-vserver-amd64 (2.6.26+0.37-6+lenny3) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-vserver-amd64 1m34.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-y', 'install', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 1m34.4s INFO: Running scripts post_install 1m34.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 1m34.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 1m34.8s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpARAECL to squeeze 1m34.8s DEBUG: sources.list: deb http://piatti.debian.org/debian/ squeeze main deb http://piatti.debian.org/debian/ squeeze contrib deb http://piatti.debian.org/debian/ squeeze non-free 1m34.8s INFO: Running scripts pre_distupgrade 1m34.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_distupgrade_exceptions'] 1m34.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_distupgrade_exceptions'] 1m34.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m34.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m34.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'update'] 1m36.8s DUMP: Get:1 http://piatti.debian.org squeeze Release.gpg [1672B] Get:2 http://piatti.debian.org squeeze Release [99.8kB] Get:3 http://piatti.debian.org squeeze/main Packages [8602kB] Get:4 http://piatti.debian.org squeeze/contrib Packages [64.1kB] Get:5 http://piatti.debian.org squeeze/non-free Packages [124kB] Fetched 8892kB in 0s (10.2MB/s) Reading package lists... 1m36.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'update'] 1m36.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-yf', 'dist-upgrade'] 2m9.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils cpio debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initramfs-tools initscripts klibc-utils libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 libklibc liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp module-init-tools mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf udev util-linux zlib1g 75 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 35.9MB of archives. After this operation, 14.0MB of additional disk space will be used. Get:1 http://piatti.debian.org squeeze/main base-files 6.0squeeze7 [68.8kB] Get:2 http://piatti.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://piatti.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://piatti.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://piatti.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://piatti.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://piatti.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://piatti.debian.org squeeze/main dpkg 1.15.8.13 [2399kB] Get:9 http://piatti.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://piatti.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://piatti.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://piatti.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://piatti.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://piatti.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://piatti.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://piatti.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://piatti.debian.org squeeze/main perl-base 5.10.1-17squeeze5 [1059kB] Get:18 http://piatti.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://piatti.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://piatti.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://piatti.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://piatti.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://piatti.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://piatti.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://piatti.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://piatti.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://piatti.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://piatti.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://piatti.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://piatti.debian.org squeeze/main tzdata 2012g-0squeeze1 [642kB] Get:35 http://piatti.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://piatti.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://piatti.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://piatti.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://piatti.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://piatti.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://piatti.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://piatti.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://piatti.debian.org squeeze/main grep 2.6.3-3 [308kB] Get:44 http://piatti.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://piatti.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://piatti.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://piatti.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://piatti.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://piatti.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://piatti.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://piatti.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://piatti.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://piatti.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://piatti.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:56 http://piatti.debian.org squeeze/main libudev0 164-3 [115kB] Get:57 http://piatti.debian.org squeeze/main udev 164-3 [522kB] Get:58 http://piatti.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:59 http://piatti.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:60 http://piatti.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:61 http://piatti.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:62 http://piatti.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:63 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:64 http://piatti.debian.org squeeze/main gpgv 1.4.10-4+squeeze1 [222kB] Get:65 http://piatti.debian.org squeeze/main gnupg 1.4.10-4+squeeze1 [2148kB] Get:66 http://piatti.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:67 http://piatti.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:68 http://piatti.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:69 http://piatti.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:70 http://piatti.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:71 http://piatti.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:72 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:73 http://piatti.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:74 http://piatti.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:75 http://piatti.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:76 http://piatti.debian.org squeeze/main cpio 2.11-4 [272kB] Get:77 http://piatti.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:78 http://piatti.debian.org squeeze/main module-init-tools 3.12-2 [112kB] Get:79 http://piatti.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:80 http://piatti.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:81 http://piatti.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:82 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:83 http://piatti.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:84 http://piatti.debian.org squeeze/main klibc-utils 1.5.20-1+squeeze1 [179kB] Get:85 http://piatti.debian.org squeeze/main libklibc 1.5.20-1+squeeze1 [53.5kB] Get:86 http://piatti.debian.org squeeze/main initramfs-tools 0.98.8 [89.5kB] Get:87 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:88 http://piatti.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 35.9MB in 0s (44.9MB/s) Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8619 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze7_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-files (6.0squeeze7) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 8621 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package gcc-4.4-base. (Reading database ... 8622 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.4-base (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8630 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libgcc1 (1:4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package liblzma2. (Reading database ... 8630 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblzma2 (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package xz-utils. (Reading database ... 8640 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up xz-utils (5.0.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8682 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.8.13_amd64.deb) ... Unpacking replacement dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dpkg (1.15.8.13) ... Installing new version of config file /etc/logrotate.d/dpkg ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package sensible-utils. (Reading database ... 8688 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sensible-utils (0.0.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8695 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debianutils (3.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package dash. (Reading database ... 8691 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Can not write log, openpty() failed (/dev/pts not mounted?) Setting up dash (0.5.5.1-7.4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8703 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libncurses5 (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8703 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8726 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up coreutils (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package diffutils. (Reading database ... 8752 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diffutils (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8774 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fslibs (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8774 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze5_amd64.deb) ... Unpacking replacement perl-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up perl-base (5.10.1-17squeeze5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8822 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up liblocale-gettext-perl (1.05-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8822 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-iconv-perl (1.7-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8823 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-charwidth-perl (0.04-6) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8823 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libtext-wrapi18n-perl (0.06-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8823 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf-i18n (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8840 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debconf (1.5.36.1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8844 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8844 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libselinux1 (2.0.96-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libdb4.8. (Reading database ... 8844 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libdb4.8 (4.8.30-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8848 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8854 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8851 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libuuid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8851 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libblkid1 (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8852 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sed (4.2.1-7) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8855 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-bin (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8857 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lsb-base (3.2-23.2squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8857 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2012g-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tzdata (2012g-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Mar 28 02:29:52 UTC 2013. Universal Time is now: Thu Mar 28 02:29:52 UTC 2013. Run 'dpkg-reconfigure tzdata' if you wish to change it. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8863 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8867 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mount (2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8868 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... 8871 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up insserv (1.14.0-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8900 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20130328T0229.log success: Enabled dependency based boot system. Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8901 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8921 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8924 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up findutils (4.4.2-1+b1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8926 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ... Unpacking replacement grep ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grep (2.6.3-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8928 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gzip (1.3.12-9+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8928 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up hostname (3.04) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8934 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8931 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libsepol1 (2.0.41-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8931 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8932 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up tar (1.23-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8932 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up diff (1:3.0-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8929 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up mktemp (8.5-1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8929 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up base-passwd (3.5.22) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8929 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up bsdutils (1:2.17.2-9) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8930 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up ncurses-base (5.7+20100313-5) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8881 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libusb-0.1-4 (2:0.1.12-16) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libudev0. (Reading database ... 8881 files and directories currently installed.) Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace udev 0.125-7+lenny3 (using .../archives/udev_164-3_amd64.deb) ... unrecognized command 'log-priority=0' Unpacking replacement udev ... Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libstdc++6 (4.4.5-8) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8953 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up zlib1g (1:1.2.3.4.dfsg-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8953 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up readline-common (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package libreadline6. (Reading database ... 8953 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libreadline6 (6.1-3) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8966 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8966 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gpgv ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gpgv (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8967 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze1_amd64.deb) ... Unpacking replacement gnupg ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gnupg (1.4.10-4+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8975 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 8975 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9019 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libslang2 (2.2.2-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9019 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libattr1 (1:2.4.44-2) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9019 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libacl1 (2.2.49-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9020 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libcomerr2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9020 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9037 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libss2 (1.41.12-4stable1) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9037 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up gcc-4.3-base (4.3.5-4) ... Can not write log, openpty() failed (/dev/pts not mounted?) (Reading database ... 9036 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Preparing to replace cpio 2.9-13lenny1 (using .../archives/cpio_2.11-4_amd64.deb) ... Unpacking replacement cpio ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Preparing to replace module-init-tools 3.4-1 (using .../module-init-tools_3.12-2_amd64.deb) ... Unpacking replacement module-init-tools ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace klibc-utils 1.5.12-2lenny1 (using .../klibc-utils_1.5.20-1+squeeze1_amd64.deb) ... Unpacking replacement klibc-utils ... Preparing to replace libklibc 1.5.12-2lenny1 (using .../libklibc_1.5.20-1+squeeze1_amd64.deb) ... Unpacking replacement libklibc ... Preparing to replace initramfs-tools 0.92o (using .../initramfs-tools_0.98.8_all.deb) ... Unpacking replacement initramfs-tools ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up libudev0 (164-3) ... Setting up udev (164-3) ... Installing new version of config file /etc/init.d/udev-mtab ... Installing new version of config file /etc/init.d/udev ... Installing new version of config file /etc/udev/links.conf ... Installing new version of config file /etc/udev/udev.conf ... A chroot environment has been detected, udev not started. update-initramfs: deferring update (trigger activated) Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up cpio (2.11-4) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up module-init-tools (3.12-2) ... Installing new version of config file /etc/init.d/module-init-tools ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libklibc (1.5.20-1+squeeze1) ... Setting up klibc-utils (1.5.20-1+squeeze1) ... Setting up initramfs-tools (0.98.8) ... Installing new version of config file /etc/initramfs-tools/initramfs.conf ... Installing new version of config file /etc/initramfs-tools/update-initramfs.conf ... update-initramfs: deferring update (trigger activated) Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... .udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation. Setting up dmsetup (2:1.02.48-5) ... update-initramfs: deferring update (trigger activated) Setting up libdevmapper1.02.1 (2:1.02.48-5) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-vserver-amd64 2m9.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', '-yf', 'dist-upgrade'] 2m9.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'show', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m10.8s DUMP: Package: tp-smapi-modules-2.6.26-2-vserver-amd64 Status: install ok installed Priority: optional Section: admin Installed-Size: 164 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-modules-extra-2.6 (2.6.26-6+lenny3) Version: 2.6.26+0.37-6+lenny3 Provides: tp-smapi-modules Depends: linux-modules-2.6.26-2-vserver-amd64 Description: ThinkPad hardware/firmware access for Linux 2.6.26 on AMD64 This package provides the ThinkPad hardware/firmware access modules for the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and Intel machines. . The tp_smapi kernel module exposes some features of the ThinkPad hardware/firmware via a sysfs interface. Currently, the main implemented functionality is control of battery charging and extended battery status. The underlying hardware interfaces are SMAPI and direct access to the embedded controller. 2m10.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-cache', 'show', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m10.8s INFO: apt-cache does not know about any of the requested packages 2m10.8s INFO: Running scripts post_distupgrade 2m10.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_exceptions'] 2m10.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_exceptions'] 2m10.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_experimental'] 2m10.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_experimental'] 2m10.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m10.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_hack_debsums'] 2m10.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m10.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 2m10.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m11.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--get-selections', '*'] 2m11.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install cpio install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initramfs-tools install initscripts install insserv install klibc-utils install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install libklibc install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libvolume-id0 install linux-image-2.6.26-2-vserver-amd64 install login install lsb-base install lzma install makedev install mawk install mktemp install module-init-tools install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tp-smapi-modules-2.6.26-2-vserver-amd64 install tzdata install ucf install udev install util-linux install xz-utils install zlib1g install 2m11.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--get-selections', '*'] 2m13.2s DEBUG: Starting command: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpARAECL', '-ac'] 2m14.1s DUMP: debsums: no md5sums for mawk 2m14.1s DEBUG: Command ok: ['debsums', '--root', '/org/piuparts.debian.org/tmp/tmpARAECL', '-ac'] 2m14.1s INFO: Running scripts pre_remove 2m14.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m14.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 2m14.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m14.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 2m14.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m14.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 2m14.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_exceptions'] 2m14.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/pre_remove_exceptions'] 2m14.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'remove', 'libklibc', 'klibc-utils', 'libvolume-id0', 'cpio', 'udev', 'linux-image-2.6.26-2-vserver-amd64', 'module-init-tools', 'initramfs-tools', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m15.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: cpio initramfs-tools klibc-utils libklibc libvolume-id0 linux-image-2.6.26-2-vserver-amd64 module-init-tools tp-smapi-modules-2.6.26-2-vserver-amd64 udev 0 upgraded, 0 newly installed, 9 to remove and 0 not upgraded. After this operation, 84.2 MB disk space will be freed. (Reading database ... 9095 files and directories currently installed.) Removing tp-smapi-modules-2.6.26-2-vserver-amd64 ... Removing linux-image-2.6.26-2-vserver-amd64 ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.26-2-vserver-amd64 /boot/vmlinuz-2.6.26-2-vserver-amd64 The link /vmlinuz is a damaged link Removing symbolic link vmlinuz Unless you used the optional flag in lilo, you may need to re-run your boot loader[lilo] The link /initrd.img is a damaged link Removing symbolic link initrd.img Unless you used the optional flag in lilo, you may need to re-run your boot loader[lilo] Removing initramfs-tools ... Removing cpio ... Removing klibc-utils ... Removing libklibc ... Removing libvolume-id0 ... Removing module-init-tools ... Removing udev ... 2m15.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'remove', 'libklibc', 'klibc-utils', 'libvolume-id0', 'cpio', 'udev', 'linux-image-2.6.26-2-vserver-amd64', 'module-init-tools', 'initramfs-tools', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m15.9s INFO: Running scripts post_remove 2m15.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_remove_exceptions'] 2m15.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_remove_exceptions'] 2m15.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', 'libklibc', 'klibc-utils', 'libvolume-id0', 'cpio', 'udev', 'linux-image-2.6.26-2-vserver-amd64', 'module-init-tools', 'initramfs-tools'] 2m16.4s DUMP: dpkg: warning: ignoring request to remove libklibc which isn't installed. dpkg: warning: ignoring request to remove klibc-utils which isn't installed. (Reading database ... 6439 files and directories currently installed.) Removing libvolume-id0 ... Purging configuration files for libvolume-id0 ... dpkg: warning: ignoring request to remove cpio which isn't installed. Removing udev ... Purging configuration files for udev ... Removing linux-image-2.6.26-2-vserver-amd64 ... Purging configuration files for linux-image-2.6.26-2-vserver-amd64 ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.26-2-vserver-amd64 /boot/vmlinuz-2.6.26-2-vserver-amd64 rmdir: failed to remove `/lib/modules/2.6.26-2-vserver-amd64': Directory not empty dpkg: warning: while removing linux-image-2.6.26-2-vserver-amd64, directory '/lib/modules/2.6.26-2-vserver-amd64' not empty so not removed. Removing module-init-tools ... Purging configuration files for module-init-tools ... dpkg: warning: while removing module-init-tools, directory '/lib/modules' not empty so not removed. Removing initramfs-tools ... Purging configuration files for initramfs-tools ... 2m16.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', 'libklibc', 'klibc-utils', 'libvolume-id0', 'cpio', 'udev', 'linux-image-2.6.26-2-vserver-amd64', 'module-init-tools', 'initramfs-tools'] 2m16.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m16.5s DUMP: (Reading database ... 6418 files and directories currently installed.) Removing tp-smapi-modules-2.6.26-2-vserver-amd64 ... Purging configuration files for tp-smapi-modules-2.6.26-2-vserver-amd64 ... 2m16.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', 'tp-smapi-modules-2.6.26-2-vserver-amd64'] 2m16.5s INFO: Running scripts post_purge 2m16.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_purge_exceptions'] 2m16.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'tmp/scripts/post_purge_exceptions'] 2m16.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', '--pending'] 2m16.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--purge', '--pending'] 2m16.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--remove', '--pending'] 2m16.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg', '--remove', '--pending'] 2m16.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m16.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg-divert', '--list'] 2m16.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 2m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'dpkg-divert', '--list'] 2m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'clean'] 2m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'apt-get', 'clean'] 2m17.8s INFO: Warning: Package purging left files on system: /etc/kernel-img.conf not owned /lib/modules/ owned by: linux-image-2.6.26-2-vserver-amd64, module-init-tools, tp-smapi-modules-2.6.26-2-vserver-amd64 /lib/modules/2.6.26-2-vserver-amd64/ owned by: linux-image-2.6.26-2-vserver-amd64, tp-smapi-modules-2.6.26-2-vserver-amd64 2m18.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'umount', '/proc'] 2m18.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpARAECL', 'umount', '/proc'] 2m18.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m18.3s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/org/piuparts.debian.org/tmp/tmpARAECL'] 2m18.3s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpARAECL 2m18.3s INFO: PASS: Upgrading between Debian distributions. 2m18.3s INFO: PASS: All tests. 2m18.3s INFO: piuparts run ends. ret=0 End: 2013-03-28 02:30:21 UTC