Start: 2015-03-23 16:37:48 UTC [lenny] Package: varnish Priority: optional Section: web Installed-Size: 500 Maintainer: Stig Sandbeck Mathisen Architecture: amd64 Version: 1.1.2 Depends: adduser, gcc (>= 3.3), libc6 (>= 2.7-1), libc6-dev | libc-dev, libncurses5 (>= 5.6+20071006-3), libvarnish0 Filename: pool/main/v/varnish/varnish_1.1.2_amd64.deb Size: 151646 MD5sum: 410002beecb9bc3bd8c22b1c9c2aa79b SHA1: 2ae8d94e292a40ec801f6296c821c0605594e48f SHA256: 44e657346d0b991f62d2c30893be6de698c40ab4b9c80ca987cfd8504da319b7 Description: A state-of-the-art, high-performance HTTP accelerator varnish is the server-side alternative to Squid, written primarily with speed in mind, and with a look to implementing full ESI-support in a future release. . The goal of the Varnish project is to develop a state-of-the-art, high-performance HTTP accelerator. . Varnish is targeted primarily at the FreeBSD 6 and Linux 2.6 platforms, and will take full advantage of the advanced I/O features offered by these operating systems. Tag: implemented-in::c, interface::daemon, network::server, protocol::http, role::program, use::proxying [squeeze] Package: varnish Priority: optional Section: web Installed-Size: 864 Maintainer: Varnish Package Maintainers Architecture: amd64 Version: 2.1.3-8+deb6u2 Depends: libc6 (>= 2.3.2), libncurses5 (>= 5.7+20100313), libvarnish1 (= 2.1.3-8+deb6u2), gcc (>= 3.3), libc6-dev | libc6.1-dev | libc-dev, adduser Filename: pool/main/v/varnish/varnish_2.1.3-8+deb6u2_amd64.deb Size: 333954 MD5sum: 8728fbc7304aabcdcc6ee078916e7b91 SHA1: a1ebdec20b3b1231c7709c868eec87d7fb7b4601 SHA256: fb085c808babce61acc400cf6f87d168d235cefc6067bdc85380b94995525d26 Description: a state-of-the-art, high-performance HTTP accelerator Varnish is a state-of-the-art, high-performance HTTP accelerator. It uses the advanced features in Linux 2.6, FreeBSD 6/7 and Solaris 10 to achieve its high performance. . Some of the features include: * A modern design * VCL - a very flexible configuration language * Load balancing with health checking of backends * Partial support for ESI - Edge Side Includes * URL rewriting * Graceful handling of "dead" backends Homepage: http://varnish-cache.org/ Tag: implemented-in::c, interface::daemon, network::server, protocol::http, role::program, use::proxying Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt varnish=2.1.3-8+deb6u2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.63~201503052127~0.62-88-g5078697 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --dpkg-noforce-unsafe-io -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz -d lenny -d squeeze --apt varnish=2.1.3-8+deb6u2 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpb0p5_1 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpb0p5_1 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 0m1.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 0m1.5s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 0m1.5s DEBUG: Created policy-rc.d and chmodded it. 0m1.5s DEBUG: Created resolv.conf. 0m1.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'update'] 0m2.1s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'update'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpb0p5_1/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpb0p5_1/tmp/scripts/ 0m2.1s INFO: Running scripts post_chroot_unpack 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s INFO: Running scripts post_setup 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_experimental'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_experimental'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m4.5s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (1806kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m4.5s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpb0p5_1 to squeeze 0m4.5s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m4.5s INFO: Running scripts pre_distupgrade 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_exceptions'] 0m4.6s DUMP: removed `/etc/adduser.conf' 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'update'] 0m7.0s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (5150kB/s) Reading package lists... 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'update'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', '-yf', 'dist-upgrade'] 1m42.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils dmsetup gcc-4.4-base insserv libc-bin libdb4.8 liblzma2 libncursesw5 libreadline6 libudev0 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux zlib1g 69 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 34.7MB of archives. After this operation, 13.3MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:3 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:4 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:5 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:6 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:7 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:8 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:9 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:10 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:11 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:12 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:13 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:14 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:15 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:16 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:17 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:18 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:19 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:20 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:21 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:22 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:23 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:24 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:25 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:26 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:27 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:28 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:29 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:30 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:31 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:32 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:33 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:34 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:35 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:36 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:37 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:38 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:39 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:40 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:41 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:42 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:43 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:44 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:45 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:46 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:47 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:48 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:49 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:50 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:51 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:52 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:53 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:54 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:55 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:56 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:57 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:58 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:59 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:60 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:61 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:62 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:63 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:64 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:65 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:66 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:67 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:68 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:69 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:70 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:71 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:72 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:73 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:74 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:75 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:76 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:77 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:78 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:79 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:80 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:81 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 34.7MB in 5s (6202kB/s) (Reading database ... 6014 files and directories currently installed.) Preparing to replace base-files 5lenny11 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). (Reading database ... 6016 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.11.3-4_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Preparing to replace libc6 2.7-18lenny7 (using .../libc6_2.11.3-4_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc-bin (2.11.3-4) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... Setting up libc6 (2.11.3-4) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.4-base. (Reading database ... 6017 files and directories currently installed.) Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-8_amd64.deb) ... Setting up gcc-4.4-base (4.4.5-8) ... (Reading database ... 6025 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-8_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.5-8) ... Selecting previously deselected package liblzma2. (Reading database ... 6025 files and directories currently installed.) Unpacking liblzma2 (from .../liblzma2_5.0.0-2_amd64.deb) ... Setting up liblzma2 (5.0.0-2) ... Selecting previously deselected package xz-utils. (Reading database ... 6035 files and directories currently installed.) Unpacking xz-utils (from .../xz-utils_5.0.0-2_amd64.deb) ... Setting up xz-utils (5.0.0-2) ... (Reading database ... 6077 files and directories currently installed.) Preparing to replace dpkg 1.14.31 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... Installing new version of config file /etc/logrotate.d/dpkg ... Selecting previously deselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6083 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ... Replacing files in old package debianutils ... Setting up sensible-utils (0.0.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6090 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.4) ... Selecting previously deselected package dash. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6086 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-7.4_amd64.deb) ... Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Setting up dash (0.5.5.1-7.4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-5_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6098 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.1-3) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6121 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package coreutils should be updated. Unpacking replacement coreutils ... Replacing files in old package mktemp ... Setting up coreutils (8.5-1) ... Selecting previously deselected package diffutils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6147 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ... Replacing files in old package diff ... Setting up diffutils (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6169 files and directories currently installed.) Preparing to replace perl-base 5.10.0-19lenny5 (using .../perl-base_5.10.1-17squeeze6_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17squeeze6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Setting up liblocale-gettext-perl (1.05-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6217 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Setting up libtext-iconv-perl (1.7-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Setting up libtext-charwidth-perl (0.04-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Setting up libtext-wrapi18n-perl (0.06-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6218 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36.1_all.deb) ... Unpacking replacement debconf-i18n ... Setting up debconf-i18n (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6235 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36.1_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.36.1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.1-6.1+squeeze1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.96-1) ... Selecting previously deselected package libdb4.8. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6239 files and directories currently installed.) Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ... Setting up libdb4.8 (4.8.30-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6243 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6.1+squeeze1_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.1-6.1+squeeze1) ... Installing new version of config file /etc/security/namespace.init ... Installing new version of config file /etc/security/limits.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-2+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-9_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6246 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-9_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6247 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6250 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-5_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.2squeeze1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.2-23.2squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6252 files and directories currently installed.) Preparing to replace tzdata 2011k-0lenny1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Mar 23 16:38:42 UTC 2015. Universal Time is now: Mon Mar 23 16:38:42 UTC 2015. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6249 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Setting up sysvinit-utils (2.88dsf-13.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6253 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-9_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6254 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-13.1+squeeze1) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6257 files and directories currently installed.) Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.14.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6286 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-13.1+squeeze1_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-13.1+squeeze1) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20150323T1638.log success: Enabled dependency based boot system. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-9_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Setting up util-linux (2.17.2-9) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6305 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-4stable1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.12-4stable1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6308 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Setting up findutils (4.4.2-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6310 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3+squeeze1_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.6.3-3+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9+squeeze1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-9+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6312 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.04) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6318 files and directories currently installed.) Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2+squeeze1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-2+squeeze1) ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.41-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6315 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-13.1+squeeze1_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-13.1+squeeze1) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.23-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6316 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ... Unpacking replacement diff ... Setting up diff (1:3.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ... Unpacking replacement mktemp ... Setting up mktemp (8.5-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.22) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6313 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-9_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.17.2-9) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6314 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-5_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20100313-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-8_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.5-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.4.dfsg-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Setting up readline-common (6.1-3) ... Selecting previously deselected package libreadline6. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6265 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ... Setting up libreadline6 (6.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libbz2-1.0 1.0.5-1+lenny1 (using .../libbz2-1.0_1.0.5-6+squeeze1_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.5-6+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ... Unpacking replacement libusb-0.1-4 ... Setting up libusb-0.1-4 (2:0.1.12-16) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6278 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6279 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28+squeeze1_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2010.08.28+squeeze1) ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: public key "Debian Archive Automatic Signing Key (7.0/wheezy) " imported gpg: key 65FFB764: public key "Wheezy Stable Release Key " imported gpg: Total number processed: 7 gpg: imported: 2 (RSA: 2) gpg: unchanged: 5 gpg: no ultimately trusted keys found (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6287 files and directories currently installed.) Preparing to replace apt 0.7.20.2+lenny2 (using .../apt_0.8.10.3+squeeze1_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.8.10.3+squeeze1) ... Installing new version of config file /etc/cron.daily/apt ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: Total number processed: 7 gpg: unchanged: 7 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ... Unpacking replacement libattr1 ... Setting up libattr1 (1:2.4.44-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6331 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ... Unpacking replacement libacl1 ... Setting up libacl1 (2.2.49-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6332 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6.1+squeeze1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.1-6.1+squeeze1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-4stable1_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.12-4stable1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6349 files and directories currently installed.) Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Setting up gcc-4.3-base (4.3.5-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6348 files and directories currently installed.) Preparing to replace adduser 3.110 (using .../adduser_3.112+nmu2_all.deb) ... Unpacking replacement adduser ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Preparing to replace procps 1:3.2.7-11 (using .../procps_1%3a3.2.8-9squeeze1_amd64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace ucf 3.0016 (using .../ucf_3.0025+nmu1_all.deb) ... Unpacking replacement ucf ... Preparing to replace libdevmapper1.02.1 2:1.02.27-4 (using .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Unpacking replacement libdevmapper1.02.1 ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace makedev 2.3.1-88 (using .../makedev_2.3.1-89_all.deb) ... Unpacking replacement makedev ... Setting up mawk (1.3.3-15) ... Setting up adduser (3.112+nmu2) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up libudev0 (164-3) ... Setting up procps (1:3.2.8-9squeeze1) ... Installing new version of config file /etc/init.d/procps ... Installing new version of config file /etc/sysctl.conf ... invoke-rc.d: policy-rc.d denied execution of start. Setting up libdb4.6 (4.6.21-16) ... Setting up ucf (3.0025+nmu1) ... Setting up libreadline5 (5.2-7) ... Setting up makedev (2.3.1-89) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... 1m42.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', '-yf', 'dist-upgrade'] 1m42.2s INFO: Running scripts post_distupgrade 1m42.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m42.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_base_cleanup'] 1m42.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_exceptions'] 1m42.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_exceptions'] 1m42.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_experimental'] 1m42.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_experimental'] 1m42.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m42.3s DUMP: Enabling dpkg --force-unsafe-io. 1m42.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 1m42.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m42.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_hack_debsums'] 1m42.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m42.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_squeeze-backports'] 1m42.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m42.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 1m42.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m42.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m42.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m42.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m42.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'clean'] 1m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'apt-get', 'clean'] 1m43.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'dpkg', '--get-selections', '*'] 1m43.2s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.2-base install gcc-4.3-base install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 1m43.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'dpkg', '--get-selections', '*'] 1m43.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'dpkg-divert', '--list'] 1m43.2s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 1m43.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'dpkg-divert', '--list'] 1m43.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'umount', '/proc'] 1m43.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'umount', '/proc'] 1m43.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'umount', '/dev/pts'] 1m43.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpb0p5_1', 'umount', '/dev/pts'] 1m43.5s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m43.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpb0p5_1'] 1m43.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpb0p5_1 1m43.5s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it. 1m43.5s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpt4Cxck 1m43.5s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpt4Cxck 1m43.5s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m45.0s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/lenny_amd64.tar.gz'] 1m45.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'mount', '-t', 'proc', 'proc', '/proc'] 1m45.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'mount', '-t', 'proc', 'proc', '/proc'] 1m45.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 1m45.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'mount', '-t', 'devpts', 'devpts', '/dev/pts'] 1m45.0s DEBUG: sources.list: deb http://archive.debian.org/debian lenny main 1m45.0s DEBUG: Created policy-rc.d and chmodded it. 1m45.0s DEBUG: Created resolv.conf. 1m45.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'update'] 1m45.6s DUMP: Hit http://archive.debian.org lenny Release.gpg Hit http://archive.debian.org lenny Release Hit http://archive.debian.org lenny/main Packages Reading package lists... 1m45.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'update'] 1m45.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpt4Cxck/tmp/scripts/ 1m45.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpt4Cxck/tmp/scripts/ 1m45.6s INFO: Running scripts post_chroot_unpack 1m45.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-yf', 'dist-upgrade'] 1m45.9s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1m45.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-yf', 'dist-upgrade'] 1m45.9s INFO: Running scripts post_setup 1m45.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_experimental'] 1m45.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_experimental'] 1m46.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_forbid_home'] 1m46.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_forbid_home'] 1m46.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_force-unsafe-io'] 1m46.0s DUMP: Adding `local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 1m46.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_force-unsafe-io'] 1m46.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_squeeze-backports'] 1m46.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_squeeze-backports'] 1m46.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m48.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 248kB of archives. After this operation, 1229kB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main adduser 3.110 [184kB] Get:2 http://archive.debian.org lenny/main ucf 3.0016 [64.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 248kB in 0s (1776kB/s) Selecting previously deselected package adduser. (Reading database ... 5916 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.110_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ... Moving old data out of the way Setting up adduser (3.110) ... Setting up ucf (3.0016) ... 1m48.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_setup_squeeze-fake-essential'] 1m48.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 1m48.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 1m48.2s INFO: Running scripts pre_test 1m48.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_test_root_password'] 1m48.2s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 1m48.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_test_root_password'] 1m48.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'show', 'varnish'] 1m48.2s DUMP: Package: varnish Priority: optional Section: web Installed-Size: 500 Maintainer: Stig Sandbeck Mathisen Architecture: amd64 Version: 1.1.2 Depends: adduser, gcc (>= 3.3), libc6 (>= 2.7-1), libc6-dev | libc-dev, libncurses5 (>= 5.6+20071006-3), libvarnish0 Filename: pool/main/v/varnish/varnish_1.1.2_amd64.deb Size: 151646 MD5sum: 410002beecb9bc3bd8c22b1c9c2aa79b SHA1: 2ae8d94e292a40ec801f6296c821c0605594e48f SHA256: 44e657346d0b991f62d2c30893be6de698c40ab4b9c80ca987cfd8504da319b7 Description: A state-of-the-art, high-performance HTTP accelerator varnish is the server-side alternative to Squid, written primarily with speed in mind, and with a look to implementing full ESI-support in a future release. . The goal of the Varnish project is to develop a state-of-the-art, high-performance HTTP accelerator. . Varnish is targeted primarily at the FreeBSD 6 and Linux 2.6 platforms, and will take full advantage of the advanced I/O features offered by these operating systems. Tag: implemented-in::c, interface::daemon, network::server, protocol::http, role::program, use::proxying 1m48.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'show', 'varnish'] 1m48.2s INFO: apt-cache knows about the following packages: varnish 1m48.2s INFO: Running scripts pre_install 1m48.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 1m48.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 1m48.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 1m48.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org lenny/main Packages release v=5.0.10,o=Debian,a=oldstable,l=Debian,c=main origin archive.debian.org Pinned packages: 1m48.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 1m48.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 1m48.6s DUMP: varnish: Installed: (none) Candidate: 1.1.2 Version table: 1.1.2 0 500 http://archive.debian.org lenny/main Packages 1m48.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 1m48.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish'] 1m55.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: binutils cpp cpp-4.3 gcc gcc-4.3 libc6-dev libgmp3c2 libgomp1 libmpfr1ldbl libvarnish0 linux-libc-dev Suggested packages: binutils-doc cpp-doc gcc-4.3-locales gcc-multilib make manpages-dev autoconf automake1.9 libtool flex bison gdb gcc-doc gcc-4.3-multilib libmudflap0-4.3-dev gcc-4.3-doc libgcc1-dbg libgomp1-dbg libmudflap0-dbg glibc-doc The following NEW packages will be installed: binutils cpp cpp-4.3 gcc gcc-4.3 libc6-dev libgmp3c2 libgomp1 libmpfr1ldbl libvarnish0 linux-libc-dev varnish 0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded. Need to get 12.7MB of archives. After this operation, 37.8MB of additional disk space will be used. Get:1 http://archive.debian.org lenny/main binutils 2.18.1~cvs20080103-7 [2730kB] Get:2 http://archive.debian.org lenny/main libgmp3c2 2:4.2.2+dfsg-3 [207kB] Get:3 http://archive.debian.org lenny/main libmpfr1ldbl 2.3.1.dfsg.1-2 [347kB] Get:4 http://archive.debian.org lenny/main cpp-4.3 4.3.2-1.1 [3370kB] Get:5 http://archive.debian.org lenny/main cpp 4:4.3.2-2 [13.9kB] Get:6 http://archive.debian.org lenny/main libgomp1 4.3.2-1.1 [15.5kB] Get:7 http://archive.debian.org lenny/main gcc-4.3 4.3.2-1.1 [2600kB] Get:8 http://archive.debian.org lenny/main gcc 4:4.3.2-2 [5028B] Get:9 http://archive.debian.org lenny/main linux-libc-dev 2.6.26-29 [759kB] Get:10 http://archive.debian.org lenny/main libc6-dev 2.7-18lenny7 [2491kB] Get:11 http://archive.debian.org lenny/main libvarnish0 1.1.2 [54.0kB] Get:12 http://archive.debian.org lenny/main varnish 1.1.2 [152kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.7MB in 4s (3113kB/s) Selecting previously deselected package binutils. (Reading database ... 6014 files and directories currently installed.) Unpacking binutils (from .../binutils_2.18.1~cvs20080103-7_amd64.deb) ... Selecting previously deselected package libgmp3c2. Unpacking libgmp3c2 (from .../libgmp3c2_2%3a4.2.2+dfsg-3_amd64.deb) ... Selecting previously deselected package libmpfr1ldbl. Unpacking libmpfr1ldbl (from .../libmpfr1ldbl_2.3.1.dfsg.1-2_amd64.deb) ... Selecting previously deselected package cpp-4.3. Unpacking cpp-4.3 (from .../cpp-4.3_4.3.2-1.1_amd64.deb) ... Selecting previously deselected package cpp. Unpacking cpp (from .../cpp_4%3a4.3.2-2_amd64.deb) ... Selecting previously deselected package libgomp1. Unpacking libgomp1 (from .../libgomp1_4.3.2-1.1_amd64.deb) ... Selecting previously deselected package gcc-4.3. Unpacking gcc-4.3 (from .../gcc-4.3_4.3.2-1.1_amd64.deb) ... Selecting previously deselected package gcc. Unpacking gcc (from .../gcc_4%3a4.3.2-2_amd64.deb) ... Selecting previously deselected package linux-libc-dev. Unpacking linux-libc-dev (from .../linux-libc-dev_2.6.26-29_amd64.deb) ... Selecting previously deselected package libc6-dev. Unpacking libc6-dev (from .../libc6-dev_2.7-18lenny7_amd64.deb) ... Selecting previously deselected package libvarnish0. Unpacking libvarnish0 (from .../libvarnish0_1.1.2_amd64.deb) ... Selecting previously deselected package varnish. Unpacking varnish (from .../varnish_1.1.2_amd64.deb) ... Setting up binutils (2.18.1~cvs20080103-7) ... Setting up libgmp3c2 (2:4.2.2+dfsg-3) ... Setting up libmpfr1ldbl (2.3.1.dfsg.1-2) ... Setting up cpp-4.3 (4.3.2-1.1) ... Setting up cpp (4:4.3.2-2) ... Setting up libgomp1 (4.3.2-1.1) ... Setting up gcc-4.3 (4.3.2-1.1) ... Setting up gcc (4:4.3.2-2) ... Setting up linux-libc-dev (2.6.26-29) ... Setting up libc6-dev (2.7-18lenny7) ... Setting up libvarnish0 (1.1.2) ... Setting up varnish (1.1.2) ... 1m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish'] 1m55.3s INFO: Running scripts post_install 1m55.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 1m55.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 1m55.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 1m55.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 1m55.5s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpt4Cxck to squeeze 1m55.5s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 1m55.5s INFO: Running scripts pre_distupgrade 1m55.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_exceptions'] 1m55.5s DUMP: removed `/etc/adduser.conf' 1m55.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_exceptions'] 1m55.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m55.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 1m55.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m55.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_zz_database-server'] 1m55.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m55.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 1m55.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'update'] 1m57.9s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655B] Get:2 http://mirror.bm.debian.org squeeze Release [96.0kB] Get:3 http://mirror.bm.debian.org squeeze/main Packages [8370kB] Fetched 8468kB in 1s (5720kB/s) Reading package lists... 1m57.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'update'] 1m57.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-yf', 'dist-upgrade'] 3m38.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: cpp-4.4 dash diffutils dmsetup gcc-4.4 gcc-4.4-base insserv libc-bin libc-dev-bin libdb4.8 liblzma2 libmpfr4 libncursesw5 libpcre3 libreadline6 libudev0 libvarnish1 sensible-utils xz-utils The following packages will be upgraded: adduser apt base-files base-passwd bash binutils bsdutils coreutils cpp cpp-4.3 debconf debconf-i18n debian-archive-keyring debianutils diff dpkg e2fslibs e2fsprogs findutils gcc gcc-4.3 gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libc6-dev libcomerr2 libdb4.6 libdevmapper1.02.1 libgcc1 libgmp3c2 libgomp1 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libuuid1 linux-libc-dev login lsb-base makedev mawk mktemp mount ncurses-base ncurses-bin passwd perl-base procps readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux varnish zlib1g 79 upgraded, 19 newly installed, 0 to remove and 0 not upgraded. Need to get 56.4MB of archives. After this operation, 34.2MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org squeeze/main base-files 6.0squeeze10 [76.1kB] Get:2 http://mirror.bm.debian.org squeeze/main libc-dev-bin 2.11.3-4 [210kB] Get:3 http://mirror.bm.debian.org squeeze/main gcc-4.4-base 4.4.5-8 [123kB] Get:4 http://mirror.bm.debian.org squeeze/main libstdc++6 4.4.5-8 [341kB] Get:5 http://mirror.bm.debian.org squeeze/main binutils 2.20.1-16 [3993kB] Get:6 http://mirror.bm.debian.org squeeze/main libc6-dev 2.11.3-4 [2593kB] Get:7 http://mirror.bm.debian.org squeeze/main libc-bin 2.11.3-4 [749kB] Get:8 http://mirror.bm.debian.org squeeze/main libc6 2.11.3-4 [4282kB] Get:9 http://mirror.bm.debian.org squeeze/main libgcc1 1:4.4.5-8 [45.0kB] Get:10 http://mirror.bm.debian.org squeeze/main zlib1g 1:1.2.3.4.dfsg-3 [79.2kB] Get:11 http://mirror.bm.debian.org squeeze/main linux-libc-dev 2.6.32-48squeeze6 [857kB] Get:12 http://mirror.bm.debian.org squeeze/main liblzma2 5.0.0-2 [184kB] Get:13 http://mirror.bm.debian.org squeeze/main xz-utils 5.0.0-2 [201kB] Get:14 http://mirror.bm.debian.org squeeze/main dpkg 1.15.11 [2402kB] Get:15 http://mirror.bm.debian.org squeeze/main sensible-utils 0.0.4 [5408B] Get:16 http://mirror.bm.debian.org squeeze/main debianutils 3.4 [49.9kB] Get:17 http://mirror.bm.debian.org squeeze/main dash 0.5.5.1-7.4 [108kB] Get:18 http://mirror.bm.debian.org squeeze/main libncurses5 5.7+20100313-5 [365kB] Get:19 http://mirror.bm.debian.org squeeze/main bash 4.1-3 [1325kB] Get:20 http://mirror.bm.debian.org squeeze/main coreutils 8.5-1 [5102kB] Get:21 http://mirror.bm.debian.org squeeze/main diffutils 1:3.0-1 [361kB] Get:22 http://mirror.bm.debian.org squeeze/main e2fslibs 1.41.12-4stable1 [145kB] Get:23 http://mirror.bm.debian.org squeeze/main perl-base 5.10.1-17squeeze6 [1068kB] Get:24 http://mirror.bm.debian.org squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:25 http://mirror.bm.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:26 http://mirror.bm.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:27 http://mirror.bm.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:28 http://mirror.bm.debian.org squeeze/main debconf-i18n 1.5.36.1 [210kB] Get:29 http://mirror.bm.debian.org squeeze/main debconf 1.5.36.1 [162kB] Get:30 http://mirror.bm.debian.org squeeze/main libpam0g 1.1.1-6.1+squeeze1 [118kB] Get:31 http://mirror.bm.debian.org squeeze/main libselinux1 2.0.96-1 [88.3kB] Get:32 http://mirror.bm.debian.org squeeze/main libdb4.8 4.8.30-2 [696kB] Get:33 http://mirror.bm.debian.org squeeze/main libpam-modules 1.1.1-6.1+squeeze1 [364kB] Get:34 http://mirror.bm.debian.org squeeze/main passwd 1:4.1.4.2+svn3283-2+squeeze1 [1113kB] Get:35 http://mirror.bm.debian.org squeeze/main libuuid1 2.17.2-9 [59.3kB] Get:36 http://mirror.bm.debian.org squeeze/main libblkid1 2.17.2-9 [109kB] Get:37 http://mirror.bm.debian.org squeeze/main sed 4.2.1-7 [251kB] Get:38 http://mirror.bm.debian.org squeeze/main ncurses-bin 5.7+20100313-5 [320kB] Get:39 http://mirror.bm.debian.org squeeze/main lsb-base 3.2-23.2squeeze1 [20.5kB] Get:40 http://mirror.bm.debian.org squeeze/main tzdata 2014e-0squeeze1 [639kB] Get:41 http://mirror.bm.debian.org squeeze/main sysvinit-utils 2.88dsf-13.1+squeeze1 [122kB] Get:42 http://mirror.bm.debian.org squeeze/main mount 2.17.2-9 [178kB] Get:43 http://mirror.bm.debian.org squeeze/main initscripts 2.88dsf-13.1+squeeze1 [70.6kB] Get:44 http://mirror.bm.debian.org squeeze/main insserv 1.14.0-2 [71.0kB] Get:45 http://mirror.bm.debian.org squeeze/main sysv-rc 2.88dsf-13.1+squeeze1 [73.9kB] Get:46 http://mirror.bm.debian.org squeeze/main util-linux 2.17.2-9 [739kB] Get:47 http://mirror.bm.debian.org squeeze/main e2fsprogs 1.41.12-4stable1 [818kB] Get:48 http://mirror.bm.debian.org squeeze/main findutils 4.4.2-1+b1 [689kB] Get:49 http://mirror.bm.debian.org squeeze/main grep 2.6.3-3+squeeze1 [314kB] Get:50 http://mirror.bm.debian.org squeeze/main gzip 1.3.12-9+squeeze1 [108kB] Get:51 http://mirror.bm.debian.org squeeze/main hostname 3.04 [15.7kB] Get:52 http://mirror.bm.debian.org squeeze/main login 1:4.1.4.2+svn3283-2+squeeze1 [783kB] Get:53 http://mirror.bm.debian.org squeeze/main libsepol1 2.0.41-1 [132kB] Get:54 http://mirror.bm.debian.org squeeze/main sysvinit 2.88dsf-13.1+squeeze1 [121kB] Get:55 http://mirror.bm.debian.org squeeze/main tar 1.23-3 [931kB] Get:56 http://mirror.bm.debian.org squeeze/main diff 1:3.0-1 [6490B] Get:57 http://mirror.bm.debian.org squeeze/main mktemp 8.5-1 [14.8kB] Get:58 http://mirror.bm.debian.org squeeze/main base-passwd 3.5.22 [41.9kB] Get:59 http://mirror.bm.debian.org squeeze/main bsdutils 1:2.17.2-9 [80.3kB] Get:60 http://mirror.bm.debian.org squeeze/main ncurses-base 5.7+20100313-5 [188kB] Get:61 http://mirror.bm.debian.org squeeze/main mawk 1.3.3-15 [90.1kB] Get:62 http://mirror.bm.debian.org squeeze/main readline-common 6.1-3 [54.0kB] Get:63 http://mirror.bm.debian.org squeeze/main libreadline6 6.1-3 [161kB] Get:64 http://mirror.bm.debian.org squeeze/main libbz2-1.0 1.0.5-6+squeeze1 [46.3kB] Get:65 http://mirror.bm.debian.org squeeze/main libusb-0.1-4 2:0.1.12-16 [21.9kB] Get:66 http://mirror.bm.debian.org squeeze/main gpgv 1.4.10-4+squeeze4 [222kB] Get:67 http://mirror.bm.debian.org squeeze/main gnupg 1.4.10-4+squeeze4 [2148kB] Get:68 http://mirror.bm.debian.org squeeze/main debian-archive-keyring 2010.08.28+squeeze1 [26.2kB] Get:69 http://mirror.bm.debian.org squeeze/main apt 0.8.10.3+squeeze1 [2174kB] Get:70 http://mirror.bm.debian.org squeeze/main libslang2 2.2.2-4 [546kB] Get:71 http://mirror.bm.debian.org squeeze/main libattr1 1:2.4.44-2 [12.8kB] Get:72 http://mirror.bm.debian.org squeeze/main libacl1 2.2.49-4 [28.3kB] Get:73 http://mirror.bm.debian.org squeeze/main libcomerr2 1.41.12-4stable1 [49.8kB] Get:74 http://mirror.bm.debian.org squeeze/main libpam-runtime 1.1.1-6.1+squeeze1 [225kB] Get:75 http://mirror.bm.debian.org squeeze/main libss2 1.41.12-4stable1 [55.0kB] Get:76 http://mirror.bm.debian.org squeeze/main libgomp1 4.4.5-8 [25.3kB] Get:77 http://mirror.bm.debian.org squeeze/main libgmp3c2 2:4.3.2+dfsg-1 [313kB] Get:78 http://mirror.bm.debian.org squeeze/main libmpfr4 3.0.0-2 [474kB] Get:79 http://mirror.bm.debian.org squeeze/main gcc-4.3 4.3.5-4 [2604kB] Get:80 http://mirror.bm.debian.org squeeze/main cpp-4.3 4.3.5-4 [3349kB] Get:81 http://mirror.bm.debian.org squeeze/main gcc-4.3-base 4.3.5-4 [110kB] Get:82 http://mirror.bm.debian.org squeeze/main adduser 3.112+nmu2 [250kB] Get:83 http://mirror.bm.debian.org squeeze/main libncursesw5 5.7+20100313-5 [390kB] Get:84 http://mirror.bm.debian.org squeeze/main libudev0 164-3 [115kB] Get:85 http://mirror.bm.debian.org squeeze/main procps 1:3.2.8-9squeeze1 [249kB] Get:86 http://mirror.bm.debian.org squeeze/main libdb4.6 4.6.21-16 [600kB] Get:87 http://mirror.bm.debian.org squeeze/main libpcre3 8.02-1.1 [234kB] Get:88 http://mirror.bm.debian.org squeeze/main ucf 3.0025+nmu1 [69.6kB] Get:89 http://mirror.bm.debian.org squeeze/main cpp-4.4 4.4.5-8 [3873kB] Get:90 http://mirror.bm.debian.org squeeze/main cpp 4:4.4.5-1 [15.0kB] Get:91 http://mirror.bm.debian.org squeeze/main libdevmapper1.02.1 2:1.02.48-5 [85.4kB] Get:92 http://mirror.bm.debian.org squeeze/main dmsetup 2:1.02.48-5 [56.7kB] Get:93 http://mirror.bm.debian.org squeeze/main gcc-4.4 4.4.5-8 [2688kB] Get:94 http://mirror.bm.debian.org squeeze/main gcc 4:4.4.5-1 [4970B] Get:95 http://mirror.bm.debian.org squeeze/main libreadline5 5.2-7 [146kB] Get:96 http://mirror.bm.debian.org squeeze/main libvarnish1 2.1.3-8+deb6u2 [92.5kB] Get:97 http://mirror.bm.debian.org squeeze/main varnish 2.1.3-8+deb6u2 [334kB] Get:98 http://mirror.bm.debian.org squeeze/main makedev 2.3.1-89 [42.4kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 56.4MB in 8s (6509kB/s) (READING DATABASE ... 7416 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE BASE-FILES 5LENNY11 (USING .../BASE-FILES_6.0SQUEEZE10_AMD64.DEB) ... UNPACKING REPLACEMENT BASE-FILES ... REPLACING FILES IN OLD PACKAGE DPKG ... SETTING UP BASE-FILES (6.0SQUEEZE10) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/DEBIAN_VERSION ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/ISSUE ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/ISSUE.NET ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBC-DEV-BIN. (READING DATABASE ... 7418 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING LIBC-DEV-BIN (FROM .../LIBC-DEV-BIN_2.11.3-4_AMD64.DEB) ... REPLACING FILES IN OLD PACKAGE LIBC6-DEV ... SELECTING PREVIOUSLY DESELECTED PACKAGE GCC-4.4-BASE. UNPACKING GCC-4.4-BASE (FROM .../GCC-4.4-BASE_4.4.5-8_AMD64.DEB) ... SETTING UP GCC-4.4-BASE (4.4.5-8) ... (READING DATABASE ... 7432 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBSTDC++6 4.3.2-1.1 (USING .../LIBSTDC++6_4.4.5-8_AMD64.DEB) ... UNPACKING REPLACEMENT LIBSTDC++6 ... SETTING UP LIBSTDC++6 (4.4.5-8) ... (READING DATABASE ... 7432 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE BINUTILS 2.18.1~CVS20080103-7 (USING .../BINUTILS_2.20.1-16_AMD64.DEB) ... UNPACKING REPLACEMENT BINUTILS ... PREPARING TO REPLACE LIBC6-DEV 2.7-18LENNY7 (USING .../LIBC6-DEV_2.11.3-4_AMD64.DEB) ... UNPACKING REPLACEMENT LIBC6-DEV ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBC-BIN. DPKG: CONSIDERING DECONFIGURATION OF LIBC6, WHICH WOULD BE BROKEN BY INSTALLATION OF LIBC-BIN ... DPKG: YES, WILL DECONFIGURE LIBC6 (BROKEN BY LIBC-BIN). UNPACKING LIBC-BIN (FROM .../LIBC-BIN_2.11.3-4_AMD64.DEB) ... DE-CONFIGURING LIBC6 ... REPLACING FILES IN OLD PACKAGE LIBC6 ... PREPARING TO REPLACE LIBC6 2.7-18LENNY7 (USING .../LIBC6_2.11.3-4_AMD64.DEB) ... REMOVING OBSOLETE CONFFILE /ETC/INIT.D/GLIBC.SH ... CHECKING FOR SERVICES THAT MAY NEED TO BE RESTARTED... CHECKING INIT SCRIPTS... UNPACKING REPLACEMENT LIBC6 ... SETTING UP LIBC-BIN (2.11.3-4) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/GAI.CONF ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/BINDRESVPORT.BLACKLIST ... SETTING UP LIBC6 (2.11.3-4) ... CHECKING FOR SERVICES THAT MAY NEED TO BE RESTARTED... CHECKING INIT SCRIPTS... NOTHING TO RESTART. (READING DATABASE ... 7481 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBGCC1 1:4.3.2-1.1 (USING .../LIBGCC1_1%3A4.4.5-8_AMD64.DEB) ... UNPACKING REPLACEMENT LIBGCC1 ... SETTING UP LIBGCC1 (1:4.4.5-8) ... (READING DATABASE ... 7481 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE ZLIB1G 1:1.2.3.3.DFSG-12 (USING .../ZLIB1G_1%3A1.2.3.4.DFSG-3_AMD64.DEB) ... UNPACKING REPLACEMENT ZLIB1G ... SETTING UP ZLIB1G (1:1.2.3.4.DFSG-3) ... (READING DATABASE ... 7481 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LINUX-LIBC-DEV 2.6.26-29 (USING .../LINUX-LIBC-DEV_2.6.32-48SQUEEZE6_AMD64.DEB) ... UNPACKING REPLACEMENT LINUX-LIBC-DEV ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBLZMA2. UNPACKING LIBLZMA2 (FROM .../LIBLZMA2_5.0.0-2_AMD64.DEB) ... SETTING UP LIBLZMA2 (5.0.0-2) ... SELECTING PREVIOUSLY DESELECTED PACKAGE XZ-UTILS. (READING DATABASE ... 7502 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING XZ-UTILS (FROM .../XZ-UTILS_5.0.0-2_AMD64.DEB) ... SETTING UP XZ-UTILS (5.0.0-2) ... (READING DATABASE ... 7544 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DPKG 1.14.31 (USING .../DPKG_1.15.11_AMD64.DEB) ... UNPACKING REPLACEMENT DPKG ... SETTING UP DPKG (1.15.11) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/LOGROTATE.D/DPKG ... SELECTING PREVIOUSLY DESELECTED PACKAGE SENSIBLE-UTILS. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7550 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING SENSIBLE-UTILS (FROM .../SENSIBLE-UTILS_0.0.4_ALL.DEB) ... REPLACING FILES IN OLD PACKAGE DEBIANUTILS ... SETTING UP SENSIBLE-UTILS (0.0.4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7557 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DEBIANUTILS 2.30 (USING .../DEBIANUTILS_3.4_AMD64.DEB) ... UNPACKING REPLACEMENT DEBIANUTILS ... SETTING UP DEBIANUTILS (3.4) ... SELECTING PREVIOUSLY DESELECTED PACKAGE DASH. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7553 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING DASH (FROM .../DASH_0.5.5.1-7.4_AMD64.DEB) ... ADDING 'DIVERSION OF /BIN/SH TO /BIN/SH.DISTRIB BY DASH' ADDING 'DIVERSION OF /USR/SHARE/MAN/MAN1/SH.1.GZ TO /USR/SHARE/MAN/MAN1/SH.DISTRIB.1.GZ BY DASH' SETTING UP DASH (0.5.5.1-7.4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7565 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBNCURSES5 5.7+20081213-1 (USING .../LIBNCURSES5_5.7+20100313-5_AMD64.DEB) ... UNPACKING REPLACEMENT LIBNCURSES5 ... SETTING UP LIBNCURSES5 (5.7+20100313-5) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7565 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE BASH 3.2-4 (USING .../ARCHIVES/BASH_4.1-3_AMD64.DEB) ... UNPACKING REPLACEMENT BASH ... SETTING UP BASH (4.1-3) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/BASH.BASHRC ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/SKEL/.BASHRC ... UPDATE-ALTERNATIVES: USING /USR/SHARE/MAN/MAN7/BASH-BUILTINS.7.GZ TO PROVIDE /USR/SHARE/MAN/MAN7/BUILTINS.7.GZ (BUILTINS.7.GZ) IN AUTO MODE. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7588 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE COREUTILS 6.10-6 (USING .../COREUTILS_8.5-1_AMD64.DEB) ... INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE, INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE COREUTILS SHOULD BE UPDATED. UNPACKING REPLACEMENT COREUTILS ... REPLACING FILES IN OLD PACKAGE MKTEMP ... SETTING UP COREUTILS (8.5-1) ... SELECTING PREVIOUSLY DESELECTED PACKAGE DIFFUTILS. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7614 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING DIFFUTILS (FROM .../DIFFUTILS_1%3A3.0-1_AMD64.DEB) ... REPLACING FILES IN OLD PACKAGE DIFF ... SETTING UP DIFFUTILS (1:3.0-1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7636 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE E2FSLIBS 1.41.3-1 (USING .../E2FSLIBS_1.41.12-4STABLE1_AMD64.DEB) ... UNPACKING REPLACEMENT E2FSLIBS ... SETTING UP E2FSLIBS (1.41.12-4STABLE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7636 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE PERL-BASE 5.10.0-19LENNY5 (USING .../PERL-BASE_5.10.1-17SQUEEZE6_AMD64.DEB) ... UNPACKING REPLACEMENT PERL-BASE ... SETTING UP PERL-BASE (5.10.1-17SQUEEZE6) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7684 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBLOCALE-GETTEXT-PERL 1.05-4 (USING .../LIBLOCALE-GETTEXT-PERL_1.05-6_AMD64.DEB) ... UNPACKING REPLACEMENT LIBLOCALE-GETTEXT-PERL ... SETTING UP LIBLOCALE-GETTEXT-PERL (1.05-6) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7684 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBTEXT-ICONV-PERL 1.7-1+B1 (USING .../LIBTEXT-ICONV-PERL_1.7-2_AMD64.DEB) ... UNPACKING REPLACEMENT LIBTEXT-ICONV-PERL ... SETTING UP LIBTEXT-ICONV-PERL (1.7-2) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7685 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBTEXT-CHARWIDTH-PERL 0.04-5+B1 (USING .../LIBTEXT-CHARWIDTH-PERL_0.04-6_AMD64.DEB) ... UNPACKING REPLACEMENT LIBTEXT-CHARWIDTH-PERL ... SETTING UP LIBTEXT-CHARWIDTH-PERL (0.04-6) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7685 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBTEXT-WRAPI18N-PERL 0.06-6 (USING .../LIBTEXT-WRAPI18N-PERL_0.06-7_ALL.DEB) ... UNPACKING REPLACEMENT LIBTEXT-WRAPI18N-PERL ... SETTING UP LIBTEXT-WRAPI18N-PERL (0.06-7) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7685 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DEBCONF-I18N 1.5.24 (USING .../DEBCONF-I18N_1.5.36.1_ALL.DEB) ... UNPACKING REPLACEMENT DEBCONF-I18N ... SETTING UP DEBCONF-I18N (1.5.36.1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7702 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DEBCONF 1.5.24 (USING .../DEBCONF_1.5.36.1_ALL.DEB) ... UNPACKING REPLACEMENT DEBCONF ... SETTING UP DEBCONF (1.5.36.1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7706 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBPAM0G 1.0.1-5+LENNY1 (USING .../LIBPAM0G_1.1.1-6.1+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBPAM0G ... SETTING UP LIBPAM0G (1.1.1-6.1+SQUEEZE1) ... CHECKING FOR SERVICES THAT MAY NEED TO BE RESTARTED...CHECKING INIT SCRIPTS... NOTHING TO RESTART. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7706 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBSELINUX1 2.0.65-5 (USING .../LIBSELINUX1_2.0.96-1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBSELINUX1 ... SETTING UP LIBSELINUX1 (2.0.96-1) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBDB4.8. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7706 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING LIBDB4.8 (FROM .../LIBDB4.8_4.8.30-2_AMD64.DEB) ... SETTING UP LIBDB4.8 (4.8.30-2) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7710 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBPAM-MODULES 1.0.1-5+LENNY1 (USING .../LIBPAM-MODULES_1.1.1-6.1+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBPAM-MODULES ... SETTING UP LIBPAM-MODULES (1.1.1-6.1+SQUEEZE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/SECURITY/NAMESPACE.INIT ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/SECURITY/LIMITS.CONF ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7716 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE PASSWD 1:4.1.1-6+LENNY1 (USING .../PASSWD_1%3A4.1.4.2+SVN3283-2+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT PASSWD ... SETTING UP PASSWD (1:4.1.4.2+SVN3283-2+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7713 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBUUID1 1.41.3-1 (USING .../LIBUUID1_2.17.2-9_AMD64.DEB) ... UNPACKING REPLACEMENT LIBUUID1 ... SETTING UP LIBUUID1 (2.17.2-9) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7713 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBBLKID1 1.41.3-1 (USING .../LIBBLKID1_2.17.2-9_AMD64.DEB) ... UNPACKING REPLACEMENT LIBBLKID1 ... SETTING UP LIBBLKID1 (2.17.2-9) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7714 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE SED 4.1.5-6 (USING .../ARCHIVES/SED_4.2.1-7_AMD64.DEB) ... UNPACKING REPLACEMENT SED ... SETTING UP SED (4.2.1-7) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7717 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE NCURSES-BIN 5.7+20081213-1 (USING .../NCURSES-BIN_5.7+20100313-5_AMD64.DEB) ... UNPACKING REPLACEMENT NCURSES-BIN ... SETTING UP NCURSES-BIN (5.7+20100313-5) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7719 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LSB-BASE 3.2-20 (USING .../LSB-BASE_3.2-23.2SQUEEZE1_ALL.DEB) ... UNPACKING REPLACEMENT LSB-BASE ... SETTING UP LSB-BASE (3.2-23.2SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7719 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE TZDATA 2011K-0LENNY1 (USING .../TZDATA_2014E-0SQUEEZE1_ALL.DEB) ... UNPACKING REPLACEMENT TZDATA ... SETTING UP TZDATA (2014E-0SQUEEZE1) ... CURRENT DEFAULT TIME ZONE: 'ETC/UTC' LOCAL TIME IS NOW: MON MAR 23 16:40:39 UTC 2015. UNIVERSAL TIME IS NOW: MON MAR 23 16:40:39 UTC 2015. RUN 'DPKG-RECONFIGURE TZDATA' IF YOU WISH TO CHANGE IT. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7716 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE SYSVINIT-UTILS 2.86.DS1-61 (USING .../SYSVINIT-UTILS_2.88DSF-13.1+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT SYSVINIT-UTILS ... REPLACING FILES IN OLD PACKAGE SYSVINIT ... SETTING UP SYSVINIT-UTILS (2.88DSF-13.1+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7720 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE MOUNT 2.13.1.1-1 (USING .../MOUNT_2.17.2-9_AMD64.DEB) ... UNPACKING REPLACEMENT MOUNT ... SETTING UP MOUNT (2.17.2-9) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7721 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE INITSCRIPTS 2.86.DS1-61 (USING .../INITSCRIPTS_2.88DSF-13.1+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT INITSCRIPTS ... SETTING UP INITSCRIPTS (2.88DSF-13.1+SQUEEZE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/BOOTLOGD ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/STOP-BOOTLOGD ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/STOP-BOOTLOGD-SINGLE ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/BOOTMISC.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/CHECKFS.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/CHECKROOT.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/HOSTNAME.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/KILLPROCS ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MOUNTALL.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MOUNTNFS-BOOTCLEAN.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MOUNTOVERFLOWTMP ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MOUNTDEVSUBFS.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MOUNTKERNFS.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/MTAB.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/RC.LOCAL ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/RMNOLOGIN ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/SENDSIGS ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/UMOUNTFS ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/UMOUNTNFS.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/URANDOM ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/NETWORK/IF-UP.D/MOUNTNFS ... SELECTING PREVIOUSLY DESELECTED PACKAGE INSSERV. DPKG: CONSIDERING DECONFIGURATION OF SYSV-RC, WHICH WOULD BE BROKEN BY INSTALLATION OF INSSERV ... DPKG: YES, WILL DECONFIGURE SYSV-RC (BROKEN BY INSSERV). (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7724 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING INSSERV (FROM .../INSSERV_1.14.0-2_AMD64.DEB) ... DE-CONFIGURING SYSV-RC ... SETTING UP INSSERV (1.14.0-2) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7753 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE SYSV-RC 2.86.DS1-61 (USING .../SYSV-RC_2.88DSF-13.1+SQUEEZE1_ALL.DEB) ... UNPACKING REPLACEMENT SYSV-RC ... SETTING UP SYSV-RC (2.88DSF-13.1+SQUEEZE1) ... INFO: CHECKING IF IT IS SAFE TO CONVERT TO DEPENDENCY BASED BOOT. INFO: REORDERING BOOT SYSTEM, LOG TO /VAR/LIB/INSSERV/RUN-20150323T1640.LOG SUCCESS: ENABLED DEPENDENCY BASED BOOT SYSTEM. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7754 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE UTIL-LINUX 2.13.1.1-1 (USING .../UTIL-LINUX_2.17.2-9_AMD64.DEB) ... INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE, INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE UTIL-LINUX SHOULD BE UPDATED. UNPACKING REPLACEMENT UTIL-LINUX ... REPLACING FILES IN OLD PACKAGE E2FSPROGS ... SETTING UP UTIL-LINUX (2.17.2-9) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/HWCLOCKFIRST.SH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/HWCLOCK.SH ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7772 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE E2FSPROGS 1.41.3-1 (USING .../E2FSPROGS_1.41.12-4STABLE1_AMD64.DEB) ... UNPACKING REPLACEMENT E2FSPROGS ... SETTING UP E2FSPROGS (1.41.12-4STABLE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/MKE2FS.CONF ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7775 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE FINDUTILS 4.4.0-2 (USING .../FINDUTILS_4.4.2-1+B1_AMD64.DEB) ... INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE, INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE FINDUTILS SHOULD BE UPDATED. UNPACKING REPLACEMENT FINDUTILS ... SETTING UP FINDUTILS (4.4.2-1+B1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7777 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE GREP 2.5.3~DFSG-6 (USING .../GREP_2.6.3-3+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT GREP ... SETTING UP GREP (2.6.3-3+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7779 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE GZIP 1.3.12-6+LENNY1 (USING .../GZIP_1.3.12-9+SQUEEZE1_AMD64.DEB) ... INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE, INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE GZIP SHOULD BE UPDATED. UNPACKING REPLACEMENT GZIP ... SETTING UP GZIP (1.3.12-9+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7779 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE HOSTNAME 2.95 (USING .../HOSTNAME_3.04_AMD64.DEB) ... UNPACKING REPLACEMENT HOSTNAME ... SETTING UP HOSTNAME (3.04) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7785 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LOGIN 1:4.1.1-6+LENNY1 (USING .../LOGIN_1%3A4.1.4.2+SVN3283-2+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT LOGIN ... SETTING UP LOGIN (1:4.1.4.2+SVN3283-2+SQUEEZE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/SECURETTY ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/PAM.D/LOGIN ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/LOGIN.DEFS ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7782 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBSEPOL1 2.0.30-2 (USING .../LIBSEPOL1_2.0.41-1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBSEPOL1 ... SETTING UP LIBSEPOL1 (2.0.41-1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7782 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE SYSVINIT 2.86.DS1-61 (USING .../SYSVINIT_2.88DSF-13.1+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT SYSVINIT ... SETTING UP SYSVINIT (2.88DSF-13.1+SQUEEZE1) ... INIT: TIMEOUT OPENING/WRITING CONTROL CHANNEL /DEV/INITCTL (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7783 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE TAR 1.20-1+LENNY1 (USING .../ARCHIVES/TAR_1.23-3_AMD64.DEB) ... UNPACKING REPLACEMENT TAR ... SETTING UP TAR (1.23-3) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7783 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DIFF 2.8.1-12 (USING .../DIFF_1%3A3.0-1_ALL.DEB) ... UNPACKING REPLACEMENT DIFF ... SETTING UP DIFF (1:3.0-1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7780 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE MKTEMP 1.5-9 (USING .../ARCHIVES/MKTEMP_8.5-1_ALL.DEB) ... UNPACKING REPLACEMENT MKTEMP ... SETTING UP MKTEMP (8.5-1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7780 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE BASE-PASSWD 3.5.20 (USING .../BASE-PASSWD_3.5.22_AMD64.DEB) ... UNPACKING REPLACEMENT BASE-PASSWD ... SETTING UP BASE-PASSWD (3.5.22) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7780 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE BSDUTILS 1:2.13.1.1-1 (USING .../BSDUTILS_1%3A2.17.2-9_AMD64.DEB) ... UNPACKING REPLACEMENT BSDUTILS ... SETTING UP BSDUTILS (1:2.17.2-9) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7781 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE NCURSES-BASE 5.7+20081213-1 (USING .../NCURSES-BASE_5.7+20100313-5_ALL.DEB) ... UNPACKING REPLACEMENT NCURSES-BASE ... SETTING UP NCURSES-BASE (5.7+20100313-5) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7732 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE MAWK 1.3.3-11.1 (USING .../MAWK_1.3.3-15_AMD64.DEB) ... UNPACKING REPLACEMENT MAWK ... PREPARING TO REPLACE READLINE-COMMON 5.2-3.1 (USING .../READLINE-COMMON_6.1-3_ALL.DEB) ... INSTALL-INFO: WARNING: MAINTAINER SCRIPTS SHOULD NOT CALL INSTALL-INFO ANYMORE, INSTALL-INFO: WARNING: THIS IS HANDLED NOW BY A DPKG TRIGGER PROVIDED BY THE INSTALL-INFO: WARNING: INSTALL-INFO PACKAGE; PACKAGE READLINE-COMMON SHOULD BE UPDATED. UNPACKING REPLACEMENT READLINE-COMMON ... SETTING UP READLINE-COMMON (6.1-3) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBREADLINE6. (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7732 FILES AND DIRECTORIES CURRENTLY INSTALLED.) UNPACKING LIBREADLINE6 (FROM .../LIBREADLINE6_6.1-3_AMD64.DEB) ... SETTING UP LIBREADLINE6 (6.1-3) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7745 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBBZ2-1.0 1.0.5-1+LENNY1 (USING .../LIBBZ2-1.0_1.0.5-6+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBBZ2-1.0 ... SETTING UP LIBBZ2-1.0 (1.0.5-6+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7745 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBUSB-0.1-4 2:0.1.12-13 (USING .../LIBUSB-0.1-4_2%3A0.1.12-16_AMD64.DEB) ... UNPACKING REPLACEMENT LIBUSB-0.1-4 ... SETTING UP LIBUSB-0.1-4 (2:0.1.12-16) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7745 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE GPGV 1.4.9-3+LENNY1 (USING .../GPGV_1.4.10-4+SQUEEZE4_AMD64.DEB) ... UNPACKING REPLACEMENT GPGV ... SETTING UP GPGV (1.4.10-4+SQUEEZE4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7746 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE GNUPG 1.4.9-3+LENNY1 (USING .../GNUPG_1.4.10-4+SQUEEZE4_AMD64.DEB) ... UNPACKING REPLACEMENT GNUPG ... SETTING UP GNUPG (1.4.10-4+SQUEEZE4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7754 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE DEBIAN-ARCHIVE-KEYRING 2010.08.28~LENNY1 (USING .../DEBIAN-ARCHIVE-KEYRING_2010.08.28+SQUEEZE1_ALL.DEB) ... UNPACKING REPLACEMENT DEBIAN-ARCHIVE-KEYRING ... SETTING UP DEBIAN-ARCHIVE-KEYRING (2010.08.28+SQUEEZE1) ... GPG: KEY F42584E6: "LENNY STABLE RELEASE KEY " NOT CHANGED GPG: KEY 55BE302B: "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (5.0/LENNY) " NOT CHANGED GPG: KEY 6D849617: "DEBIAN-VOLATILE ARCHIVE AUTOMATIC SIGNING KEY (5.0/LENNY)" NOT CHANGED GPG: KEY B98321F9: "SQUEEZE STABLE RELEASE KEY " NOT CHANGED GPG: KEY 473041FA: "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (6.0/SQUEEZE) " NOT CHANGED GPG: KEY 46925553: PUBLIC KEY "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (7.0/WHEEZY) " IMPORTED GPG: KEY 65FFB764: PUBLIC KEY "WHEEZY STABLE RELEASE KEY " IMPORTED GPG: TOTAL NUMBER PROCESSED: 7 GPG: IMPORTED: 2 (RSA: 2) GPG: UNCHANGED: 5 GPG: NO ULTIMATELY TRUSTED KEYS FOUND (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7754 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE APT 0.7.20.2+LENNY2 (USING .../APT_0.8.10.3+SQUEEZE1_AMD64.DEB) ... UNPACKING REPLACEMENT APT ... SETTING UP APT (0.8.10.3+SQUEEZE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/CRON.DAILY/APT ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/LOGROTATE.D/APT ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/APT/APT.CONF.D/01AUTOREMOVE ... GPG: KEY F42584E6: "LENNY STABLE RELEASE KEY " NOT CHANGED GPG: KEY 55BE302B: "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (5.0/LENNY) " NOT CHANGED GPG: KEY 6D849617: "DEBIAN-VOLATILE ARCHIVE AUTOMATIC SIGNING KEY (5.0/LENNY)" NOT CHANGED GPG: KEY B98321F9: "SQUEEZE STABLE RELEASE KEY " NOT CHANGED GPG: KEY 473041FA: "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (6.0/SQUEEZE) " NOT CHANGED GPG: KEY 46925553: "DEBIAN ARCHIVE AUTOMATIC SIGNING KEY (7.0/WHEEZY) " NOT CHANGED GPG: KEY 65FFB764: "WHEEZY STABLE RELEASE KEY " NOT CHANGED GPG: TOTAL NUMBER PROCESSED: 7 GPG: UNCHANGED: 7 (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7798 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBSLANG2 2.1.3-3 (USING .../LIBSLANG2_2.2.2-4_AMD64.DEB) ... UNPACKING REPLACEMENT LIBSLANG2 ... SETTING UP LIBSLANG2 (2.2.2-4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7798 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBATTR1 1:2.4.43-2 (USING .../LIBATTR1_1%3A2.4.44-2_AMD64.DEB) ... UNPACKING REPLACEMENT LIBATTR1 ... SETTING UP LIBATTR1 (1:2.4.44-2) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7798 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBACL1 2.2.47-2 (USING .../LIBACL1_2.2.49-4_AMD64.DEB) ... UNPACKING REPLACEMENT LIBACL1 ... SETTING UP LIBACL1 (2.2.49-4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7799 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBCOMERR2 1.41.3-1 (USING .../LIBCOMERR2_1.41.12-4STABLE1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBCOMERR2 ... SETTING UP LIBCOMERR2 (1.41.12-4STABLE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7799 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBPAM-RUNTIME 1.0.1-5+LENNY1 (USING .../LIBPAM-RUNTIME_1.1.1-6.1+SQUEEZE1_ALL.DEB) ... UNPACKING REPLACEMENT LIBPAM-RUNTIME ... SETTING UP LIBPAM-RUNTIME (1.1.1-6.1+SQUEEZE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7816 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBSS2 1.41.3-1 (USING .../LIBSS2_1.41.12-4STABLE1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBSS2 ... SETTING UP LIBSS2 (1.41.12-4STABLE1) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7816 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE LIBGOMP1 4.3.2-1.1 (USING .../LIBGOMP1_4.4.5-8_AMD64.DEB) ... UNPACKING REPLACEMENT LIBGOMP1 ... PREPARING TO REPLACE LIBGMP3C2 2:4.2.2+DFSG-3 (USING .../LIBGMP3C2_2%3A4.3.2+DFSG-1_AMD64.DEB) ... UNPACKING REPLACEMENT LIBGMP3C2 ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBMPFR4. UNPACKING LIBMPFR4 (FROM .../LIBMPFR4_3.0.0-2_AMD64.DEB) ... PREPARING TO REPLACE GCC-4.3 4.3.2-1.1 (USING .../GCC-4.3_4.3.5-4_AMD64.DEB) ... UNPACKING REPLACEMENT GCC-4.3 ... PREPARING TO REPLACE CPP-4.3 4.3.2-1.1 (USING .../CPP-4.3_4.3.5-4_AMD64.DEB) ... UNPACKING REPLACEMENT CPP-4.3 ... PREPARING TO REPLACE GCC-4.3-BASE 4.3.2-1.1 (USING .../GCC-4.3-BASE_4.3.5-4_AMD64.DEB) ... UNPACKING REPLACEMENT GCC-4.3-BASE ... SETTING UP GCC-4.3-BASE (4.3.5-4) ... (READING DATABASE ... (READING DATABASE ... 5% (READING DATABASE ... 10% (READING DATABASE ... 15% (READING DATABASE ... 20% (READING DATABASE ... 25% (READING DATABASE ... 30% (READING DATABASE ... 35% (READING DATABASE ... 40% (READING DATABASE ... 45% (READING DATABASE ... 50% (READING DATABASE ... 55% (READING DATABASE ... 60% (READING DATABASE ... 65% (READING DATABASE ... 70% (READING DATABASE ... 75% (READING DATABASE ... 80% (READING DATABASE ... 85% (READING DATABASE ... 90% (READING DATABASE ... 95% (READING DATABASE ... 100% (READING DATABASE ... 7822 FILES AND DIRECTORIES CURRENTLY INSTALLED.) PREPARING TO REPLACE ADDUSER 3.110 (USING .../ADDUSER_3.112+NMU2_ALL.DEB) ... UNPACKING REPLACEMENT ADDUSER ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBNCURSESW5. UNPACKING LIBNCURSESW5 (FROM .../LIBNCURSESW5_5.7+20100313-5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBUDEV0. UNPACKING LIBUDEV0 (FROM .../LIBUDEV0_164-3_AMD64.DEB) ... PREPARING TO REPLACE PROCPS 1:3.2.7-11 (USING .../PROCPS_1%3A3.2.8-9SQUEEZE1_AMD64.DEB) ... INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF STOP. UNPACKING REPLACEMENT PROCPS ... PREPARING TO REPLACE LIBDB4.6 4.6.21-11 (USING .../LIBDB4.6_4.6.21-16_AMD64.DEB) ... UNPACKING REPLACEMENT LIBDB4.6 ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBPCRE3. UNPACKING LIBPCRE3 (FROM .../LIBPCRE3_8.02-1.1_AMD64.DEB) ... PREPARING TO REPLACE UCF 3.0016 (USING .../UCF_3.0025+NMU1_ALL.DEB) ... UNPACKING REPLACEMENT UCF ... SELECTING PREVIOUSLY DESELECTED PACKAGE CPP-4.4. UNPACKING CPP-4.4 (FROM .../CPP-4.4_4.4.5-8_AMD64.DEB) ... PREPARING TO REPLACE CPP 4:4.3.2-2 (USING .../CPP_4%3A4.4.5-1_AMD64.DEB) ... UNPACKING REPLACEMENT CPP ... PREPARING TO REPLACE LIBDEVMAPPER1.02.1 2:1.02.27-4 (USING .../LIBDEVMAPPER1.02.1_2%3A1.02.48-5_AMD64.DEB) ... UNPACKING REPLACEMENT LIBDEVMAPPER1.02.1 ... SELECTING PREVIOUSLY DESELECTED PACKAGE DMSETUP. UNPACKING DMSETUP (FROM .../DMSETUP_2%3A1.02.48-5_AMD64.DEB) ... SELECTING PREVIOUSLY DESELECTED PACKAGE GCC-4.4. UNPACKING GCC-4.4 (FROM .../GCC-4.4_4.4.5-8_AMD64.DEB) ... PREPARING TO REPLACE GCC 4:4.3.2-2 (USING .../GCC_4%3A4.4.5-1_AMD64.DEB) ... REMOVING OLD GCC DOC DIRECTORY. UNPACKING REPLACEMENT GCC ... PREPARING TO REPLACE LIBREADLINE5 5.2-3.1 (USING .../LIBREADLINE5_5.2-7_AMD64.DEB) ... UNPACKING REPLACEMENT LIBREADLINE5 ... SELECTING PREVIOUSLY DESELECTED PACKAGE LIBVARNISH1. UNPACKING LIBVARNISH1 (FROM .../LIBVARNISH1_2.1.3-8+DEB6U2_AMD64.DEB) ... PREPARING TO REPLACE VARNISH 1.1.2 (USING .../VARNISH_2.1.3-8+DEB6U2_AMD64.DEB) ... INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF STOP. INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF STOP. UNPACKING REPLACEMENT VARNISH ... PREPARING TO REPLACE MAKEDEV 2.3.1-88 (USING .../MAKEDEV_2.3.1-89_ALL.DEB) ... UNPACKING REPLACEMENT MAKEDEV ... SETTING UP LIBC-DEV-BIN (2.11.3-4) ... SETTING UP BINUTILS (2.20.1-16) ... SETTING UP LINUX-LIBC-DEV (2.6.32-48SQUEEZE6) ... SETTING UP LIBC6-DEV (2.11.3-4) ... SETTING UP MAWK (1.3.3-15) ... SETTING UP LIBGOMP1 (4.4.5-8) ... SETTING UP LIBGMP3C2 (2:4.3.2+DFSG-1) ... SETTING UP LIBMPFR4 (3.0.0-2) ... SETTING UP CPP-4.3 (4.3.5-4) ... SETTING UP GCC-4.3 (4.3.5-4) ... SETTING UP ADDUSER (3.112+NMU2) ... SETTING UP LIBNCURSESW5 (5.7+20100313-5) ... SETTING UP LIBUDEV0 (164-3) ... SETTING UP PROCPS (1:3.2.8-9SQUEEZE1) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/PROCPS ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/SYSCTL.CONF ... INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF START. SETTING UP LIBDB4.6 (4.6.21-16) ... SETTING UP LIBPCRE3 (8.02-1.1) ... SETTING UP UCF (3.0025+NMU1) ... SETTING UP CPP-4.4 (4.4.5-8) ... SETTING UP CPP (4:4.4.5-1) ... SETTING UP GCC-4.4 (4.4.5-8) ... SETTING UP GCC (4:4.4.5-1) ... SETTING UP LIBREADLINE5 (5.2-7) ... SETTING UP LIBVARNISH1 (2.1.3-8+DEB6U2) ... SETTING UP VARNISH (2.1.3-8+DEB6U2) ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/VARNISHLOG ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/INIT.D/VARNISH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/DEFAULT/VARNISH ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/VARNISH/DEFAULT.VCL ... INSTALLING NEW VERSION OF CONFIG FILE /ETC/LOGROTATE.D/VARNISH ... INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF START. INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF START. INVOKE-RC.D: POLICY-RC.D DENIED EXECUTION OF START. SETTING UP MAKEDEV (2.3.1-89) ... SETTING UP DMSETUP (2:1.02.48-5) ... SETTING UP LIBDEVMAPPER1.02.1 (2:1.02.48-5) ... 3m38.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-yf', 'dist-upgrade'] 3m38.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'show', 'varnish'] 3m39.1s DUMP: Package: varnish Priority: optional Section: web Installed-Size: 864 Maintainer: Varnish Package Maintainers Architecture: amd64 Version: 2.1.3-8+deb6u2 Depends: libc6 (>= 2.3.2), libncurses5 (>= 5.7+20100313), libvarnish1 (= 2.1.3-8+deb6u2), gcc (>= 3.3), libc6-dev | libc6.1-dev | libc-dev, adduser Filename: pool/main/v/varnish/varnish_2.1.3-8+deb6u2_amd64.deb Size: 333954 MD5sum: 8728fbc7304aabcdcc6ee078916e7b91 SHA1: a1ebdec20b3b1231c7709c868eec87d7fb7b4601 SHA256: fb085c808babce61acc400cf6f87d168d235cefc6067bdc85380b94995525d26 Description: a state-of-the-art, high-performance HTTP accelerator Varnish is a state-of-the-art, high-performance HTTP accelerator. It uses the advanced features in Linux 2.6, FreeBSD 6/7 and Solaris 10 to achieve its high performance. . Some of the features include: * A modern design * VCL - a very flexible configuration language * Load balancing with health checking of backends * Partial support for ESI - Edge Side Includes * URL rewriting * Graceful handling of "dead" backends Homepage: http://varnish-cache.org/ Tag: implemented-in::c, interface::daemon, network::server, protocol::http, role::program, use::proxying 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'show', 'varnish'] 3m39.1s INFO: apt-cache knows about the following packages: varnish 3m39.1s INFO: Running scripts pre_install 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m39.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m39.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 3m39.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 3m39.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 3m39.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 3m39.2s DUMP: varnish: Installed: 2.1.3-8+deb6u2 Candidate: 2.1.3-8+deb6u2 Version table: *** 2.1.3-8+deb6u2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 3m39.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 3m39.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish'] 3m39.5s DUMP: Reading package lists... Building dependency tree... Reading state information... varnish is already the newest version. The following packages were automatically installed and are no longer required: libvarnish0 libmpfr1ldbl Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3m39.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish'] 3m39.5s INFO: Running scripts post_install 3m39.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 3m39.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 3m39.5s INFO: Running scripts post_distupgrade 3m39.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_base_cleanup'] 3m39.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_base_cleanup'] 3m39.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_exceptions'] 3m39.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_exceptions'] 3m39.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_experimental'] 3m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_experimental'] 3m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 3m39.6s DUMP: Enabling dpkg --force-unsafe-io. 3m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 3m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_hack_debsums'] 3m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_squeeze-backports'] 3m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_squeeze-backports'] 3m39.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m39.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_distupgrade_squeeze-fake-essential'] 3m39.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m39.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m39.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m40.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m40.1s INFO: Running scripts pre_install 3m40.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_database-server'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_exceptions'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_extras'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_install_foreign_architecture_i386'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 3m40.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 3m40.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy'] 3m40.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 3m40.2s DUMP: varnish: Installed: 2.1.3-8+deb6u2 Candidate: 2.1.3-8+deb6u2 Version table: *** 2.1.3-8+deb6u2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 100 /var/lib/dpkg/status 3m40.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-cache', 'policy', 'varnish'] 3m40.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish=2.1.3-8+deb6u2'] 3m40.6s DUMP: Reading package lists... Building dependency tree... Reading state information... varnish is already the newest version. The following packages were automatically installed and are no longer required: libvarnish0 libmpfr1ldbl Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3m40.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', '-y', 'install', 'varnish=2.1.3-8+deb6u2'] 3m40.6s INFO: Running scripts post_install 3m40.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 3m40.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_install_exceptions'] 3m40.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m40.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m40.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--get-selections', '*'] 3m40.9s DUMP: adduser install apt install base-files install base-passwd install bash install binutils install bsdutils install coreutils install cpp install cpp-4.3 install cpp-4.4 install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diff install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc install gcc-4.2-base install gcc-4.3 install gcc-4.3-base install gcc-4.4 install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc-dev-bin install libc6 install libc6-dev install libcomerr2 install libdb4.6 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install libgmp3c2 install libgomp1 install liblocale-gettext-perl install liblzma2 install libmpfr1ldbl install libmpfr4 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install libvarnish0 install libvarnish1 install linux-libc-dev install login install lsb-base install lzma install makedev install mawk install mktemp install mount install ncurses-base install ncurses-bin install passwd install perl-base install procps install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install varnish install xz-utils install zlib1g install 3m40.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--get-selections', '*'] 3m41.5s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', '-ac'] 3m42.3s DUMP: debsums: no md5sums for binutils debsums: no md5sums for mawk 3m42.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', '-ac'] 3m42.3s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 3m42.3s DUMP: 0.12~bpo70+1 3m42.3s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 3m42.3s INFO: Running adequate version 0.12~bpo70+1 now. 3m42.3s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'varnish'] 3m42.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'varnish'] 3m42.5s INFO: Running scripts pre_remove 3m42.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 3m42.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 3m42.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m42.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 3m42.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 3m44.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 3m44.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m44.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 3m44.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m44.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 3m44.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_exceptions'] 3m44.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/pre_remove_exceptions'] 3m44.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'remove', '--no-install-recommends', 'libmpfr1ldbl', 'gcc', 'libvarnish1', 'libvarnish0', 'libmpfr4', 'libgomp1', 'gcc-4.3', 'libpcre3', 'gcc-4.4', 'libgmp3c2', 'libc6-dev', 'binutils', 'libc-dev-bin', 'linux-libc-dev', 'cpp', 'cpp-4.4', 'cpp-4.3', 'varnish'] 3m44.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: binutils cpp cpp-4.3 cpp-4.4 gcc gcc-4.3 gcc-4.4 libc-dev-bin libc6-dev libgmp3c2 libgomp1 libmpfr1ldbl libmpfr4 libpcre3 libvarnish0 libvarnish1 linux-libc-dev varnish 0 upgraded, 0 newly installed, 18 to remove and 0 not upgraded. After this operation, 58.8 MB disk space will be freed. (Reading database ... 8006 files and directories currently installed.) Removing varnish ... invoke-rc.d: policy-rc.d denied execution of stop. invoke-rc.d: policy-rc.d denied execution of stop. invoke-rc.d: policy-rc.d denied execution of stop. Removing gcc ... Removing gcc-4.4 ... Removing gcc-4.3 ... Removing binutils ... Removing cpp ... Removing cpp-4.3 ... Removing cpp-4.4 ... Removing libc6-dev ... Removing libc-dev-bin ... Removing libmpfr1ldbl ... Removing libmpfr4 ... Removing libgmp3c2 ... Removing libgomp1 ... Removing libvarnish1 ... Removing libpcre3 ... Removing libvarnish0 ... Removing linux-libc-dev ... 3m44.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'remove', '--no-install-recommends', 'libmpfr1ldbl', 'gcc', 'libvarnish1', 'libvarnish0', 'libmpfr4', 'libgomp1', 'gcc-4.3', 'libpcre3', 'gcc-4.4', 'libgmp3c2', 'libc6-dev', 'binutils', 'libc-dev-bin', 'linux-libc-dev', 'cpp', 'cpp-4.4', 'cpp-4.3', 'varnish'] 3m44.9s INFO: Running scripts post_remove 3m44.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions'] 3m44.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions'] 3m44.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions_lenny'] 3m44.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions_lenny'] 3m44.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions_squeeze'] 3m44.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_exceptions_squeeze'] 3m44.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_extras'] 3m44.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_remove_extras'] 3m44.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', 'libmpfr1ldbl', 'gcc', 'libvarnish1', 'libvarnish0', 'libmpfr4', 'libgomp1', 'gcc-4.3', 'libpcre3', 'gcc-4.4', 'libgmp3c2', 'libc6-dev', 'binutils', 'libc-dev-bin', 'linux-libc-dev', 'cpp', 'cpp-4.4', 'cpp-4.3'] 3m45.0s DUMP: (Reading database ... 6420 files and directories currently installed.) Removing libmpfr1ldbl ... Purging configuration files for libmpfr1ldbl ... dpkg: warning: ignoring request to remove gcc which isn't installed. Removing libvarnish1 ... Purging configuration files for libvarnish1 ... Removing libvarnish0 ... Purging configuration files for libvarnish0 ... Removing libmpfr4 ... Purging configuration files for libmpfr4 ... Removing libgomp1 ... Purging configuration files for libgomp1 ... dpkg: warning: ignoring request to remove gcc-4.3 which isn't installed. Removing libpcre3 ... Purging configuration files for libpcre3 ... dpkg: warning: ignoring request to remove gcc-4.4 which isn't installed. Removing libgmp3c2 ... Purging configuration files for libgmp3c2 ... dpkg: warning: ignoring request to remove libc6-dev which isn't installed. Removing binutils ... Purging configuration files for binutils ... dpkg: warning: ignoring request to remove libc-dev-bin which isn't installed. dpkg: warning: ignoring request to remove linux-libc-dev which isn't installed. dpkg: warning: ignoring request to remove cpp which isn't installed. dpkg: warning: ignoring request to remove cpp-4.4 which isn't installed. dpkg: warning: ignoring request to remove cpp-4.3 which isn't installed. 3m45.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', 'libmpfr1ldbl', 'gcc', 'libvarnish1', 'libvarnish0', 'libmpfr4', 'libgomp1', 'gcc-4.3', 'libpcre3', 'gcc-4.4', 'libgmp3c2', 'libc6-dev', 'binutils', 'libc-dev-bin', 'linux-libc-dev', 'cpp', 'cpp-4.4', 'cpp-4.3'] 3m45.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', 'varnish'] 3m45.2s DUMP: (Reading database ... 6420 files and directories currently installed.) Removing varnish ... Purging configuration files for varnish ... dpkg: warning: while removing varnish, directory '/etc/varnish' not empty so not removed. 3m45.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', 'varnish'] 3m45.2s INFO: Running scripts post_purge 3m45.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_purge_exceptions'] 3m45.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'tmp/scripts/post_purge_exceptions'] 3m45.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', '--pending'] 3m45.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--purge', '--pending'] 3m45.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--remove', '--pending'] 3m45.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg', '--remove', '--pending'] 3m45.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m45.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m45.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg-divert', '--list'] 3m45.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 3m45.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'dpkg-divert', '--list'] 3m45.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'clean'] 3m45.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'apt-get', 'clean'] 3m46.2s INFO: Warning: Package purging left files on system: /etc/varnish/ owned by: varnish /etc/varnish/secret not owned 3m46.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'umount', '/proc'] 3m46.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'umount', '/proc'] 3m46.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'umount', '/dev/pts'] 3m46.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpt4Cxck', 'umount', '/dev/pts'] 3m46.5s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m46.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpt4Cxck'] 3m46.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpt4Cxck 3m46.5s INFO: PASS: Upgrading between Debian distributions. 3m46.5s INFO: PASS: All tests. 3m46.5s INFO: piuparts run ends. ret=0 End: 2015-03-23 16:41:34 UTC