Start: 2019-12-23 06:28:50 UTC Package: libx2go-config-perl Source: x2goserver Version: 4.1.0.3-5 Installed-Size: 68 Maintainer: Debian Remote Maintainers Architecture: all Replaces: libx2go-server-perl (<< 4.1.0.0-4~) Depends: x2goserver-common (<< 4.1.0.3-5.1~), x2goserver-common (>= 4.1.0.3-5), perl Breaks: libx2go-server-perl (<< 4.1.0.0-4~) Description: Perl X2Go::Config package Homepage: http://wiki.x2go.org Description-md5: 5187b86fc4048362013602ddc94058fe Section: perl Priority: optional Filename: pool/main/x/x2goserver/libx2go-config-perl_4.1.0.3-5_all.deb Size: 48092 MD5sum: a9ed6fc881581581c143d1b85d257fc6 SHA256: 64893c1cb121df6970b14fe5f2ddb4c198963c9b1e1e862eb7955912af2fcd14 Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --install-remove-install --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-others --scriptsdir /etc/piuparts/scripts-leftovers --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid_amd64.tar.gz -d sid --no-upgrade-test --apt libx2go-config-perl=4.1.0.3-5 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.0.2~201909101611~1.0.1-11-g98f8c745 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --install-remove-install --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-others --scriptsdir /etc/piuparts/scripts-leftovers --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid_amd64.tar.gz -d sid --no-upgrade-test --apt libx2go-config-perl=4.1.0.3-5 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp6FuLvM 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/sid_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp6FuLvM 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/sid_amd64.tar.gz'] 0m3.9s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/sid_amd64.tar.gz'] 0m3.9s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/proc'] 0m3.9s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/proc'] 0m3.9s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts'] 0m3.9s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts'] 0m3.9s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/ptmx'] 0m3.9s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/ptmx'] 0m3.9s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/1', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/console'] 0m4.0s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/1', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/console'] 0m4.0s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/shm'] 0m4.0s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/shm'] 0m4.0s DEBUG: sources.list: deb http://mirror-ubc.debian.org/debian/ sid main 0m4.0s DEBUG: Created policy-rc.d and chmodded it. 0m4.0s DEBUG: Created resolv.conf. 0m4.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp6FuLvM/tmp/scripts/ 0m4.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts-leftovers to /srv/piuparts.debian.org/tmp/tmp6FuLvM/tmp/scripts/ 0m4.0s INFO: Running scripts post_chroot_unpack 0m4.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m4.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m4.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'update'] 0m9.9s DUMP: Get:1 http://mirror-ubc.debian.org/debian sid InRelease [142 kB] Get:2 http://mirror-ubc.debian.org/debian sid/main amd64 Packages [8197 kB] Get:3 http://mirror-ubc.debian.org/debian sid/main Translation-en [6156 kB] Fetched 14.5 MB in 5s (3110 kB/s) Reading package lists... 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'update'] 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-yf', 'dist-upgrade'] 0m10.6s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-yf', 'dist-upgrade'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m11.0s DUMP: f667ba80ac580df7408e201e967094cd - 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m11.0s INFO: Running scripts post_setup 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_dummy_users'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_dummy_users'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_fake-essential'] 0m14.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... init-system-helpers is already the newest version (1.57). The following additional packages will be installed: sensible-utils ucf Suggested packages: dbconfig-mysql | dbconfig-pgsql | dbconfig-sqlite | dbconfig-sqlite3 | dbconfig-no-thanks The following NEW packages will be installed: dbconfig-common sensible-utils ucf 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 690 kB of archives. After this operation, 1852 kB of additional disk space will be used. Get:1 http://mirror-ubc.debian.org/debian sid/main amd64 sensible-utils all 0.0.12+nmu1 [16.0 kB] Get:2 http://mirror-ubc.debian.org/debian sid/main amd64 ucf all 3.0038+nmu1 [69.0 kB] Get:3 http://mirror-ubc.debian.org/debian sid/main amd64 dbconfig-common all 2.0.13 [605 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 690 kB in 0s (38.7 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6533 files and directories currently installed.) Preparing to unpack .../sensible-utils_0.0.12+nmu1_all.deb ... Unpacking sensible-utils (0.0.12+nmu1) ... Selecting previously unselected package ucf. Preparing to unpack .../ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package dbconfig-common. Preparing to unpack .../dbconfig-common_2.0.13_all.deb ... Unpacking dbconfig-common (2.0.13) ... Setting up sensible-utils (0.0.12+nmu1) ... Setting up ucf (3.0038+nmu1) ... Setting up dbconfig-common (2.0.13) ... Creating config file /etc/dbconfig-common/config with new version 0m14.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_fake-essential'] 0m14.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_forbid_home'] 0m14.2s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m14.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_forbid_home'] 0m14.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_force-unsafe-io'] 0m14.3s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' dpkg-divert: warning: diverting file '/bin/sync' from an Essential package with rename is dangerous, use --no-rename '/bin/sync' -> 'true' 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_force-unsafe-io'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_minimize'] 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_minimize'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_squeeze-backports'] 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_squeeze-backports'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_zz_backports'] 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_setup_zz_backports'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m14.4s DEBUG: Recording chroot state 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m15.0s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 1.8.4 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.47 install ok installed bash bash 5.0-5 install ok installed bsdutils bsdutils 1:2.34-0.1 install ok installed coreutils coreutils 8.30-3+b1 install ok installed dash dash 0.5.10.2-6 install ok installed dbconfig-common dbconfig-common 2.0.13 install ok installed debconf debconf 1.5.73 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.9.1 install ok installed diffutils diffutils 1:3.7-3 install ok installed dpkg dpkg 1.19.7 install ok installed e2fsprogs e2fsprogs 1.45.4-1 install ok installed fdisk fdisk 2.34-0.1 install ok installed findutils findutils 4.7.0-1 install ok installed gcc-9-base:amd64 gcc-9-base 9.2.1-21 install ok installed gpgv gpgv 2.2.17-3 install ok installed grep grep 3.3-1 install ok installed gzip gzip 1.9-3+b1 install ok installed hostname hostname 3.23 install ok installed init-system-helpers init-system-helpers 1.57 install ok installed libacl1:amd64 libacl1 2.2.53-5 install ok installed libapt-pkg5.0:amd64 libapt-pkg5.0 1.8.4 install ok installed libattr1:amd64 libattr1 1:2.4.48-5 install ok installed libaudit-common libaudit-common 1:2.8.5-2 install ok installed libaudit1:amd64 libaudit1 1:2.8.5-2+b1 install ok installed libblkid1:amd64 libblkid1 2.34-0.1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-2 install ok installed libc-bin libc-bin 2.29-6 install ok installed libc6:amd64 libc6 2.29-6 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2.1+b1 install ok installed libcom-err2:amd64 libcom-err2 1.45.4-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.10-7 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.250 install ok installed libext2fs2:amd64 libext2fs2 1.45.4-1 install ok installed libfdisk1:amd64 libfdisk1 2.34-0.1 install ok installed libffi6:amd64 libffi6 3.2.1-9 install ok installed libgcc1:amd64 libgcc1 1:9.2.1-21 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.5-3 install ok installed libgmp10:amd64 libgmp10 2:6.1.2+dfsg-4 install ok installed libgnutls30:amd64 libgnutls30 3.6.11.1-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.36-7 install ok installed libhogweed5:amd64 libhogweed5 3.5.1+really3.5.1-2 install ok installed libidn2-0:amd64 libidn2-0 2.2.0-2 install ok installed liblz4-1:amd64 liblz4-1 1.9.2-2 install ok installed liblzma5:amd64 liblzma5 5.2.4-1+b1 install ok installed libmount1:amd64 libmount1 2.34-0.1 install ok installed libncursesw6:amd64 libncursesw6 6.1+20191019-1 install ok installed libnettle7:amd64 libnettle7 3.5.1+really3.5.1-2 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.18.1-2 install ok installed libpam-modules:amd64 libpam-modules 1.3.1-5 install ok installed libpam-modules-bin libpam-modules-bin 1.3.1-5 install ok installed libpam-runtime libpam-runtime 1.3.1-5 install ok installed libpam0g:amd64 libpam0g 1.3.1-5 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.34-7 install ok installed libpcre3:amd64 libpcre3 2:8.39-12+b1 install ok installed libseccomp2:amd64 libseccomp2 2.4.2-2 install ok installed libselinux1:amd64 libselinux1 3.0-1 install ok installed libsemanage-common libsemanage-common 3.0-1 install ok installed libsemanage1:amd64 libsemanage1 3.0-1 install ok installed libsepol1:amd64 libsepol1 3.0-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.34-0.1 install ok installed libss2:amd64 libss2 1.45.4-1 install ok installed libstdc++6:amd64 libstdc++6 9.2.1-21 install ok installed libsystemd0:amd64 libsystemd0 244-3 install ok installed libtasn1-6:amd64 libtasn1-6 4.15.0-2 install ok installed libtinfo6:amd64 libtinfo6 6.1+20191019-1 install ok installed libudev1:amd64 libudev1 244-3 install ok installed libunistring2:amd64 libunistring2 0.9.10-2 install ok installed libuuid1:amd64 libuuid1 2.34-0.1 install ok installed libzstd1:amd64 libzstd1 1.4.4+dfsg-1 install ok installed login login 1:4.8-1 install ok installed logsave logsave 1.45.4-1 install ok installed lsb-base lsb-base 11.1.0 install ok installed mawk mawk 1.3.3-17+b3 install ok installed mount mount 2.34-0.1 install ok installed ncurses-base ncurses-base 6.1+20191019-1 install ok installed ncurses-bin ncurses-bin 6.1+20191019-1 install ok installed passwd passwd 1:4.8-1 install ok installed perl-base perl-base 5.30.0-9 install ok installed sed sed 4.7-1 install ok installed sensible-utils sensible-utils 0.0.12+nmu1 install ok installed sysvinit-utils sysvinit-utils 2.96-1 install ok installed tar tar 1.30+dfsg-6+b1 install ok installed tzdata tzdata 2019c-3 install ok installed ucf ucf 3.0038+nmu1 install ok installed util-linux util-linux 2.34-0.1 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-1+b1 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-divert', '--list'] 0m15.0s DUMP: local diversion of /bin/sync to /bin/sync.distrib diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /home to /home.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-divert', '--list'] 0m15.0s INFO: Running scripts is_testable 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/is_testable_uninstallable'] 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/is_testable_uninstallable'] 0m15.0s INFO: apt-cache does not know about any of the requested packages 0m15.0s INFO: Running scripts pre_test 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_test_exceptions'] 0m15.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_test_exceptions'] 0m15.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_test_root_password'] 0m15.1s DUMP: New password: Retype new password: passwd: password updated successfully 0m15.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_test_root_password'] 0m15.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m15.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m16.5s DEBUG: No broken symlinks as far as we can find. 0m16.5s INFO: Running scripts pre_install 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'show', '--no-all-versions', 'libx2go-config-perl=4.1.0.3-5'] 0m18.0s DUMP: Package: libx2go-config-perl Source: x2goserver Version: 4.1.0.3-5 Installed-Size: 68 Maintainer: Debian Remote Maintainers Architecture: all Replaces: libx2go-server-perl (<< 4.1.0.0-4~) Depends: x2goserver-common (<< 4.1.0.3-5.1~), x2goserver-common (>= 4.1.0.3-5), perl Breaks: libx2go-server-perl (<< 4.1.0.0-4~) Description-en: Perl X2Go::Config package X2Go is a server based computing environment with - session resuming - low bandwidth support - session brokerage support - client-side mass storage mounting support - client-side printing support - audio support - authentication by smartcard and USB stick . This package contains the X2Go::Config Perl package. Description-md5: 5187b86fc4048362013602ddc94058fe Homepage: http://wiki.x2go.org Section: perl Priority: optional Filename: pool/main/x/x2goserver/libx2go-config-perl_4.1.0.3-5_all.deb Size: 48092 MD5sum: a9ed6fc881581581c143d1b85d257fc6 SHA256: 64893c1cb121df6970b14fe5f2ddb4c198963c9b1e1e862eb7955912af2fcd14 0m18.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'show', '--no-all-versions', 'libx2go-config-perl=4.1.0.3-5'] 0m18.0s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: x2goserver-common (<< 4.1.0.3-5.1~), x2goserver-common (>= 4.1.0.3-5), perl 0m18.0s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpg0DMxr/piuparts-depends-dummy'] 0m18.0s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpg0DMxr/piuparts-depends-dummy.deb'. 0m18.0s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpg0DMxr/piuparts-depends-dummy'] 0m18.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-f', '${Version}\n', '-W', 'apt'] 0m18.0s DUMP: 1.8.4 0m18.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-f', '${Version}\n', '-W', 'apt'] 0m18.0s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpg0DMxr/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp6FuLvM/tmp 0m18.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', '--allow-downgrades', 'install', './tmp/piuparts-depends-dummy.deb'] 0m20.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libgdbm-compat4 libgdbm6 libperl5.30 perl perl-modules-5.30 x2goserver-common Suggested packages: gdbm-l10n perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libb-debug-perl liblocale-codes-perl Recommended packages: netbase The following NEW packages will be installed: libgdbm-compat4 libgdbm6 libperl5.30 perl perl-modules-5.30 piuparts-depends-dummy x2goserver-common 0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. Need to get 7261 kB/7262 kB of archives. After this operation, 46.4 MB of additional disk space will be used. Get:1 /tmp/piuparts-depends-dummy.deb piuparts-depends-dummy all 0.invalid.0 [664 B] Get:2 http://mirror-ubc.debian.org/debian sid/main amd64 perl-modules-5.30 all 5.30.0-9 [2803 kB] Get:3 http://mirror-ubc.debian.org/debian sid/main amd64 libgdbm6 amd64 1.18.1-5 [64.5 kB] Get:4 http://mirror-ubc.debian.org/debian sid/main amd64 libgdbm-compat4 amd64 1.18.1-5 [44.2 kB] Get:5 http://mirror-ubc.debian.org/debian sid/main amd64 libperl5.30 amd64 5.30.0-9 [4008 kB] Get:6 http://mirror-ubc.debian.org/debian sid/main amd64 perl amd64 5.30.0-9 [290 kB] Get:7 http://mirror-ubc.debian.org/debian sid/main amd64 x2goserver-common all 4.1.0.3-5 [50.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 7261 kB in 0s (67.9 MB/s) Selecting previously unselected package perl-modules-5.30. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6870 files and directories currently installed.) Preparing to unpack .../0-perl-modules-5.30_5.30.0-9_all.deb ... Unpacking perl-modules-5.30 (5.30.0-9) ... Selecting previously unselected package libgdbm6:amd64. Preparing to unpack .../1-libgdbm6_1.18.1-5_amd64.deb ... Unpacking libgdbm6:amd64 (1.18.1-5) ... Selecting previously unselected package libgdbm-compat4:amd64. Preparing to unpack .../2-libgdbm-compat4_1.18.1-5_amd64.deb ... Unpacking libgdbm-compat4:amd64 (1.18.1-5) ... Selecting previously unselected package libperl5.30:amd64. Preparing to unpack .../3-libperl5.30_5.30.0-9_amd64.deb ... Unpacking libperl5.30:amd64 (5.30.0-9) ... Selecting previously unselected package perl. Preparing to unpack .../4-perl_5.30.0-9_amd64.deb ... Unpacking perl (5.30.0-9) ... Selecting previously unselected package x2goserver-common. Preparing to unpack .../5-x2goserver-common_4.1.0.3-5_all.deb ... Unpacking x2goserver-common (4.1.0.3-5) ... Selecting previously unselected package piuparts-depends-dummy. Preparing to unpack .../6-piuparts-depends-dummy.deb ... Unpacking piuparts-depends-dummy (0.invalid.0) ... Setting up perl-modules-5.30 (5.30.0-9) ... Setting up x2goserver-common (4.1.0.3-5) ... Creating x2gouser group. Adding group `x2gouser' (GID 150) ... Done. Creating x2gouser user. Adding system user `x2gouser' (UID 150) ... Adding new user `x2gouser' (UID 150) with group `x2gouser' ... Not creating home directory `/var/lib/x2go'. Setting up libgdbm6:amd64 (1.18.1-5) ... Setting up libgdbm-compat4:amd64 (1.18.1-5) ... Setting up libperl5.30:amd64 (5.30.0-9) ... Setting up perl (5.30.0-9) ... Setting up piuparts-depends-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.29-6) ... 0m20.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', '--allow-downgrades', 'install', './tmp/piuparts-depends-dummy.deb'] 0m20.6s INFO: Installation of ['./tmp/piuparts-depends-dummy.deb'] ok 0m20.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp6FuLvM/./tmp/piuparts-depends-dummy.deb 0m20.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m20.6s DUMP: piuparts-depends-dummy install ok installed 0m20.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m20.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m20.6s DUMP: (Reading database ... 8833 files and directories currently installed.) Removing piuparts-depends-dummy (0.invalid.0) ... 0m20.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m20.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m20.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m20.7s DEBUG: Recording chroot state 0m21.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m22.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m23.0s DEBUG: No broken symlinks as far as we can find. 0m23.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m24.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin mirror-ubc.debian.org Pinned packages: 0m24.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m24.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m24.1s DUMP: libx2go-config-perl: Installed: (none) Candidate: 4.1.0.3-5 Version table: 4.1.0.3-5 500 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages 0m24.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m24.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', 'libx2go-config-perl=4.1.0.3-5'] 0m25.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libx2go-config-perl 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 48.1 kB of archives. After this operation, 69.6 kB of additional disk space will be used. Get:1 http://mirror-ubc.debian.org/debian sid/main amd64 libx2go-config-perl all 4.1.0.3-5 [48.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 48.1 kB in 0s (1053 kB/s) Selecting previously unselected package libx2go-config-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8833 files and directories currently installed.) Preparing to unpack .../libx2go-config-perl_4.1.0.3-5_all.deb ... Unpacking libx2go-config-perl (4.1.0.3-5) ... Setting up libx2go-config-perl (4.1.0.3-5) ... 0m25.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', 'libx2go-config-perl=4.1.0.3-5'] 0m25.2s INFO: Running scripts post_install 0m25.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m25.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m25.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'remove', 'libx2go-config-perl'] 0m26.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: x2goserver-common Use 'sudo apt autoremove' to remove it. The following packages will be REMOVED: libx2go-config-perl 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 69.6 kB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8840 files and directories currently installed.) Removing libx2go-config-perl (4.1.0.3-5) ... 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'remove', 'libx2go-config-perl'] 0m26.2s INFO: Reinstalling after remove 0m26.2s INFO: Running scripts pre_install 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m26.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m26.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m26.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m26.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m26.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m26.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m26.3s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin mirror-ubc.debian.org Pinned packages: 0m26.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m26.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m26.4s DUMP: libx2go-config-perl: Installed: (none) Candidate: 4.1.0.3-5 Version table: 4.1.0.3-5 500 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages 0m26.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m26.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', 'libx2go-config-perl=4.1.0.3-5'] 0m27.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libx2go-config-perl debconf: delaying package configuration, since apt-utils is not installed 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/48.1 kB of archives. After this operation, 69.6 kB of additional disk space will be used. Selecting previously unselected package libx2go-config-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8833 files and directories currently installed.) Preparing to unpack .../libx2go-config-perl_4.1.0.3-5_all.deb ... Unpacking libx2go-config-perl (4.1.0.3-5) ... Setting up libx2go-config-perl (4.1.0.3-5) ... 0m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', 'libx2go-config-perl=4.1.0.3-5'] 0m27.4s INFO: Running scripts post_install 0m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m27.4s INFO: Running scripts pre_install 0m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_database-server'] 0m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_exceptions'] 0m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m27.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_extras'] 0m27.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m27.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture'] 0m27.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m27.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m27.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m27.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin mirror-ubc.debian.org Pinned packages: 0m27.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy'] 0m27.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m27.6s DUMP: libx2go-config-perl: Installed: 4.1.0.3-5 Candidate: 4.1.0.3-5 Version table: *** 4.1.0.3-5 500 500 http://mirror-ubc.debian.org/debian sid/main amd64 Packages 100 /var/lib/dpkg/status 0m27.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-cache', 'policy', 'libx2go-config-perl'] 0m27.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', '--reinstall', 'libx2go-config-perl=4.1.0.3-5'] 0m28.5s DUMP: Reading package lists... Building dependency tree... Reading state information... debconf: delaying package configuration, since apt-utils is not installed 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/48.1 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8840 files and directories currently installed.) Preparing to unpack .../libx2go-config-perl_4.1.0.3-5_all.deb ... Unpacking libx2go-config-perl (4.1.0.3-5) over (4.1.0.3-5) ... Setting up libx2go-config-perl (4.1.0.3-5) ... 0m28.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', '-y', 'install', '--reinstall', 'libx2go-config-perl=4.1.0.3-5'] 0m28.5s INFO: Running scripts post_install 0m28.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m28.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_install_exceptions'] 0m28.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m29.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m29.7s DEBUG: No broken symlinks as far as we can find. 0m30.1s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', '-ac', '--ignore-obsolete'] 0m31.0s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', '-ac', '--ignore-obsolete'] 0m31.0s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m31.1s DUMP: 0.15.2 0m31.1s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m31.1s INFO: Running adequate version 0.15.2 now. 0m31.1s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'libx2go-config-perl'] 0m31.3s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'libx2go-config-perl'] 0m31.3s INFO: Running scripts pre_remove 0m31.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m31.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m31.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m31.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m31.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m32.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m32.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m32.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m32.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m32.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m32.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_exceptions'] 0m32.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_exceptions'] 0m32.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_preseed_cleanup'] 0m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/pre_remove_preseed_cleanup'] 0m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m33.0s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 1.8.4 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.47 install ok installed bash bash 5.0-5 install ok installed bsdutils bsdutils 1:2.34-0.1 install ok installed coreutils coreutils 8.30-3+b1 install ok installed dash dash 0.5.10.2-6 install ok installed dbconfig-common dbconfig-common 2.0.13 install ok installed debconf debconf 1.5.73 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.9.1 install ok installed diffutils diffutils 1:3.7-3 install ok installed dpkg dpkg 1.19.7 install ok installed e2fsprogs e2fsprogs 1.45.4-1 install ok installed fdisk fdisk 2.34-0.1 install ok installed findutils findutils 4.7.0-1 install ok installed gcc-9-base:amd64 gcc-9-base 9.2.1-21 install ok installed gpgv gpgv 2.2.17-3 install ok installed grep grep 3.3-1 install ok installed gzip gzip 1.9-3+b1 install ok installed hostname hostname 3.23 install ok installed init-system-helpers init-system-helpers 1.57 install ok installed libacl1:amd64 libacl1 2.2.53-5 install ok installed libapt-pkg5.0:amd64 libapt-pkg5.0 1.8.4 install ok installed libattr1:amd64 libattr1 1:2.4.48-5 install ok installed libaudit-common libaudit-common 1:2.8.5-2 install ok installed libaudit1:amd64 libaudit1 1:2.8.5-2+b1 install ok installed libblkid1:amd64 libblkid1 2.34-0.1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-2 install ok installed libc-bin libc-bin 2.29-6 install ok installed libc6:amd64 libc6 2.29-6 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2.1+b1 install ok installed libcom-err2:amd64 libcom-err2 1.45.4-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.10-7 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.250 install ok installed libext2fs2:amd64 libext2fs2 1.45.4-1 install ok installed libfdisk1:amd64 libfdisk1 2.34-0.1 install ok installed libffi6:amd64 libffi6 3.2.1-9 install ok installed libgcc1:amd64 libgcc1 1:9.2.1-21 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.5-3 install ok installed libgdbm-compat4:amd64 libgdbm-compat4 1.18.1-5 install ok installed libgdbm6:amd64 libgdbm6 1.18.1-5 install ok installed libgmp10:amd64 libgmp10 2:6.1.2+dfsg-4 install ok installed libgnutls30:amd64 libgnutls30 3.6.11.1-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.36-7 install ok installed libhogweed5:amd64 libhogweed5 3.5.1+really3.5.1-2 install ok installed libidn2-0:amd64 libidn2-0 2.2.0-2 install ok installed liblz4-1:amd64 liblz4-1 1.9.2-2 install ok installed liblzma5:amd64 liblzma5 5.2.4-1+b1 install ok installed libmount1:amd64 libmount1 2.34-0.1 install ok installed libncursesw6:amd64 libncursesw6 6.1+20191019-1 install ok installed libnettle7:amd64 libnettle7 3.5.1+really3.5.1-2 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.18.1-2 install ok installed libpam-modules:amd64 libpam-modules 1.3.1-5 install ok installed libpam-modules-bin libpam-modules-bin 1.3.1-5 install ok installed libpam-runtime libpam-runtime 1.3.1-5 install ok installed libpam0g:amd64 libpam0g 1.3.1-5 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.34-7 install ok installed libpcre3:amd64 libpcre3 2:8.39-12+b1 install ok installed libperl5.30:amd64 libperl5.30 5.30.0-9 install ok installed libseccomp2:amd64 libseccomp2 2.4.2-2 install ok installed libselinux1:amd64 libselinux1 3.0-1 install ok installed libsemanage-common libsemanage-common 3.0-1 install ok installed libsemanage1:amd64 libsemanage1 3.0-1 install ok installed libsepol1:amd64 libsepol1 3.0-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.34-0.1 install ok installed libss2:amd64 libss2 1.45.4-1 install ok installed libstdc++6:amd64 libstdc++6 9.2.1-21 install ok installed libsystemd0:amd64 libsystemd0 244-3 install ok installed libtasn1-6:amd64 libtasn1-6 4.15.0-2 install ok installed libtinfo6:amd64 libtinfo6 6.1+20191019-1 install ok installed libudev1:amd64 libudev1 244-3 install ok installed libunistring2:amd64 libunistring2 0.9.10-2 install ok installed libuuid1:amd64 libuuid1 2.34-0.1 install ok installed libx2go-config-perl libx2go-config-perl 4.1.0.3-5 install ok installed libzstd1:amd64 libzstd1 1.4.4+dfsg-1 install ok installed login login 1:4.8-1 install ok installed logsave logsave 1.45.4-1 install ok installed lsb-base lsb-base 11.1.0 install ok installed mawk mawk 1.3.3-17+b3 install ok installed mount mount 2.34-0.1 install ok installed ncurses-base ncurses-base 6.1+20191019-1 install ok installed ncurses-bin ncurses-bin 6.1+20191019-1 install ok installed passwd passwd 1:4.8-1 install ok installed perl perl 5.30.0-9 install ok installed perl-base perl-base 5.30.0-9 install ok installed perl-modules-5.30 perl-modules-5.30 5.30.0-9 install ok installed sed sed 4.7-1 install ok installed sensible-utils sensible-utils 0.0.12+nmu1 install ok installed sysvinit-utils sysvinit-utils 2.96-1 install ok installed tar tar 1.30+dfsg-6+b1 install ok installed tzdata tzdata 2019c-3 install ok installed ucf ucf 3.0038+nmu1 install ok installed util-linux util-linux 2.34-0.1 install ok installed x2goserver-common x2goserver-common 4.1.0.3-5 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-1+b1 0m33.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m33.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'remove', 'perl-modules-5.30', 'libgdbm6:amd64', 'x2goserver-common', 'perl', 'libperl5.30:amd64', 'libgdbm-compat4:amd64', 'libx2go-config-perl'] 0m33.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libgdbm-compat4 libgdbm6 libperl5.30 libx2go-config-perl perl perl-modules-5.30 x2goserver-common 0 upgraded, 0 newly installed, 7 to remove and 0 not upgraded. After this operation, 46.4 MB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8840 files and directories currently installed.) Removing libx2go-config-perl (4.1.0.3-5) ... Removing perl (5.30.0-9) ... Removing libperl5.30:amd64 (5.30.0-9) ... Removing libgdbm-compat4:amd64 (1.18.1-5) ... Removing libgdbm6:amd64 (1.18.1-5) ... Removing perl-modules-5.30 (5.30.0-9) ... Removing x2goserver-common (4.1.0.3-5) ... Processing triggers for libc-bin (2.29-6) ... 0m33.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'remove', 'perl-modules-5.30', 'libgdbm6:amd64', 'x2goserver-common', 'perl', 'libperl5.30:amd64', 'libgdbm-compat4:amd64', 'libx2go-config-perl'] 0m33.8s INFO: Running scripts post_remove 0m33.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_remove_cleanup'] 0m33.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_remove_cleanup'] 0m33.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_remove_exceptions'] 0m33.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_remove_exceptions'] 0m33.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'perl-modules-5.30', 'libgdbm6:amd64', 'x2goserver-common', 'perl', 'libperl5.30:amd64', 'libgdbm-compat4:amd64'] 0m34.0s DUMP: dpkg: warning: ignoring request to remove perl-modules-5.30 which isn't installed dpkg: warning: ignoring request to remove libgdbm6 which isn't installed (Reading database ... 6877 files and directories currently installed.) Purging configuration files for x2goserver-common (4.1.0.3-5) ... Removing user `x2gouser' ... Warning: group `x2gouser' has no more members. Done. Purging configuration files for perl (5.30.0-9) ... dpkg: warning: ignoring request to remove libperl5.30 which isn't installed dpkg: warning: ignoring request to remove libgdbm-compat4 which isn't installed 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'perl-modules-5.30', 'libgdbm6:amd64', 'x2goserver-common', 'perl', 'libperl5.30:amd64', 'libgdbm-compat4:amd64'] 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'libx2go-config-perl'] 0m34.0s DUMP: dpkg: warning: ignoring request to remove libx2go-config-perl which isn't installed 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', 'libx2go-config-perl'] 0m34.0s INFO: Running scripts post_purge 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_purge_exceptions'] 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_purge_exceptions'] 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_purge_manual_cleanup'] 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_purge_manual_cleanup'] 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', '--pending'] 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--purge', '--pending'] 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--remove', '--pending'] 0m34.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg', '--remove', '--pending'] 0m34.0s INFO: Running scripts post_test 0m34.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_test_exceptions'] 0m34.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'tmp/scripts/post_test_exceptions'] 0m34.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m34.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m34.9s DEBUG: No broken symlinks as far as we can find. 0m34.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-divert', '--list'] 0m34.9s DUMP: local diversion of /bin/sync to /bin/sync.distrib diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /home to /home.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m34.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'dpkg-divert', '--list'] 0m34.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m34.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6FuLvM', 'apt-get', 'clean'] 0m34.9s DEBUG: Recording chroot state 0m35.9s INFO: PASS: Installation and purging test. 0m36.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/shm'] 0m36.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/shm'] 0m36.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/console'] 0m36.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/console'] 0m36.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/ptmx'] 0m36.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/ptmx'] 0m36.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts'] 0m36.8s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/dev/pts'] 0m36.8s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/proc'] 0m36.9s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6FuLvM/proc'] 0m36.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m37.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp6FuLvM'] 0m37.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp6FuLvM 0m37.1s INFO: PASS: All tests. 0m37.1s INFO: piuparts run ends. ret=0 End: 2019-12-23 06:29:28 UTC