Start: 2026-04-25 21:36:13 GMT [sid] Package: perl Source: perl (5.40.1-7) Version: 5.40.1-7+b1 Installed-Size: 838 Maintainer: Niko Tyni Architecture: amd64 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02) Depends: perl-base (= 5.40.1-7+b1), perl-modules-5.40 (>= 5.40.1-7), libperl5.40 (= 5.40.1-7+b1) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Conflicts: libjson-pp-perl (<< 2.27200-2) Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Description: Larry Wall's Practical Extraction and Report Language Multi-Arch: allowed Homepage: https://dev.perl.org/perl5/ Description-md5: 603cb1e5fe66da8106c364f4e9b84082 Build-Essential: yes Tag: devel::interpreter, devel::lang:perl, devel::library, implemented-in::c, implemented-in::perl, interface::commandline, role::devel-lib, role::metapackage, role::program Section: perl Priority: standard Filename: pool/main/p/perl/perl_5.40.1-7+b1_amd64.deb Size: 264096 MD5sum: 55f55d6a0ff9332410bb256a8aa279d5 SHA256: 05ddd261f36c337ab2dfac55fd5cdd07b1f8926ba3b87695d81de017173630a0 [experimental] Package: perl Version: 5.42.2-1 Installed-Size: 835 Maintainer: Niko Tyni Architecture: amd64 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.04), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.213), libcompress-raw-zlib-perl (= 2.222), libcompress-zlib-perl (= 2.213), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.020), libdigest-md5-perl (= 2.59), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.035), libextutils-cbuilder-perl (= 0.280242), libextutils-command-perl (= 7.76), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.570000), libfile-spec-perl (= 3.9400), libhttp-tiny-perl (= 0.090), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.213), libio-compress-bzip2-perl (= 2.213), libio-compress-perl (= 2.213), libio-compress-zlib-perl (= 2.213), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.005002), libmath-complex-perl (= 1.6300), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20260329.42), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.244), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.37), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.024), libtest-harness-perl (= 3.50), libtest-simple-perl (= 1.302210), libtest-tester-perl (= 1.302210), libtest-use-ok-perl (= 1.302210), libtest2-suite-perl (= 1.302210), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.43), libthreads-shared-perl (= 1.70), libtime-hires-perl (= 1.9778), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3600), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9933), libversion-requirements-perl, podlators-perl (= 6.0.2) Depends: perl-base (= 5.42.2-1), perl-modules-5.42 (>= 5.42.2-1), libperl5.42 (= 5.42.2-1) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Conflicts: libjson-pp-perl (<< 2.27200-2) Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.42.2-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Description: Larry Wall's Practical Extraction and Report Language Multi-Arch: allowed Homepage: https://dev.perl.org/perl5/ Description-md5: 603cb1e5fe66da8106c364f4e9b84082 Build-Essential: yes Tag: devel::interpreter, devel::lang:perl, devel::library, implemented-in::c, implemented-in::perl, interface::commandline, role::devel-lib, role::metapackage, role::program Section: perl Priority: standard Filename: pool/main/p/perl/perl_5.42.2-1_amd64.deb Size: 265212 MD5sum: 5350fb4d9ef77b0e3bf245872daba106 SHA256: 8968d74bacf338d3c645dbe1454c8d108d267adb033be82188969224fff51141 Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/bin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d sid -d experimental -B /srv/piuparts.debian.org/slave/refchroot/sid2experimental/reference-chroot-metadata.dat --apt perl=5.42.2-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.6.1~202508211856~1.6.0-10-gffba2cce starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/bin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d sid -d experimental -B /srv/piuparts.debian.org/slave/refchroot/sid2experimental/reference-chroot-metadata.dat --apt perl=5.42.2-1 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 6.1.0-44-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.164-1 (2026-03-09) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpv49on3fs 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpv49on3fs 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/proc'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/proc'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts'] 0m0.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/ptmx'] 0m0.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/ptmx'] 0m0.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/console'] 0m0.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/console'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/shm'] 0m0.4s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/shm'] 0m0.4s DEBUG: sources.list: deb http://deb.debian.org/debian/ sid main 0m0.4s DEBUG: Created policy-rc.d and chmodded it. 0m0.4s DEBUG: Created resolv.conf. 0m0.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpv49on3fs/tmp/scripts/ 0m0.4s INFO: Running scripts post_chroot_unpack 0m0.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'update'] 0m4.2s DUMP: Get:1 http://deb.debian.org/debian sid InRelease [187 kB] Get:2 http://deb.debian.org/debian sid/main amd64 Packages [10.4 MB] Get:3 http://deb.debian.org/debian sid/main Translation-en [7568 kB] Fetched 18.1 MB in 3s (6309 kB/s) Reading package lists... 0m4.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'update'] 0m4.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-yf', 'dist-upgrade'] 0m6.0s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following packages will be upgraded: gcc-16-base libbz2-1.0 libdebconfclient0 libgcc-s1 libstdc++6 tzdata 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 1241 kB of archives. After this operation, 171 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian sid/main amd64 gcc-16-base amd64 16-20260425-1 [35.8 kB] Get:2 http://deb.debian.org/debian sid/main amd64 libstdc++6 amd64 16-20260425-1 [824 kB] Get:3 http://deb.debian.org/debian sid/main amd64 libgcc-s1 amd64 16-20260425-1 [74.0 kB] Get:4 http://deb.debian.org/debian sid/main amd64 libbz2-1.0 amd64 1.0.8-6+b2 [39.9 kB] Get:5 http://deb.debian.org/debian sid/main amd64 libdebconfclient0 amd64 0.282+b3 [7720 B] Get:6 http://deb.debian.org/debian sid/main amd64 tzdata all 2026b-1 [260 kB] Preconfiguring packages ... Fetched 1241 kB in 0s (4118 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../gcc-16-base_16-20260425-1_amd64.deb ... Unpacking gcc-16-base:amd64 (16-20260425-1) over (16-20260322-1) ... Setting up gcc-16-base:amd64 (16-20260425-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../libstdc++6_16-20260425-1_amd64.deb ... Unpacking libstdc++6:amd64 (16-20260425-1) over (16-20260322-1) ... Setting up libstdc++6:amd64 (16-20260425-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../libgcc-s1_16-20260425-1_amd64.deb ... Unpacking libgcc-s1:amd64 (16-20260425-1) over (16-20260322-1) ... Setting up libgcc-s1:amd64 (16-20260425-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../libbz2-1.0_1.0.8-6+b2_amd64.deb ... Unpacking libbz2-1.0:amd64 (1.0.8-6+b2) over (1.0.8-6+b1) ... Setting up libbz2-1.0:amd64 (1.0.8-6+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.282+b3_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.282+b3) over (0.282+b2) ... Setting up libdebconfclient0:amd64 (0.282+b3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4902 files and directories currently installed.) Preparing to unpack .../tzdata_2026b-1_all.deb ... Unpacking tzdata (2026b-1) over (2026a-3) ... Setting up tzdata (2026b-1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Apr 25 21:36:19 UTC 2026. Universal Time is now: Sat Apr 25 21:36:19 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Processing triggers for libc-bin (2.42-15) ... 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-yf', 'dist-upgrade'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m6.5s DUMP: 1c1f9d168fbf38064aa9e242601b80eb - 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m6.5s INFO: Running scripts post_setup 0m6.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_dummy_users'] 0m7.6s DUMP: useradd warning: dummy1000's uid 1000 is greater than SYS_UID_MAX 999 useradd warning: dummy1001's uid 1001 is greater than SYS_UID_MAX 999 useradd warning: dummy1002's uid 1002 is greater than SYS_UID_MAX 999 useradd warning: dummy1003's uid 1003 is greater than SYS_UID_MAX 999 useradd warning: dummy1004's uid 1004 is greater than SYS_UID_MAX 999 useradd warning: dummy1005's uid 1005 is greater than SYS_UID_MAX 999 useradd warning: dummy1006's uid 1006 is greater than SYS_UID_MAX 999 useradd warning: dummy1007's uid 1007 is greater than SYS_UID_MAX 999 useradd warning: dummy1008's uid 1008 is greater than SYS_UID_MAX 999 useradd warning: dummy1009's uid 1009 is greater than SYS_UID_MAX 999 useradd warning: dummy1010's uid 1010 is greater than SYS_UID_MAX 999 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_dummy_users'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_forbid_home'] 0m7.6s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_forbid_home'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_force-unsafe-io'] 0m7.6s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /usr/bin/sync to /usr/bin/sync.distrib' Adding 'local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged' '/bin/sync' -> 'true' 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_force-unsafe-io'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_minimize'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_minimize'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_squeeze-backports'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_squeeze-backports'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_zz_backports'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_setup_zz_backports'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m7.6s DUMP: install ok installed apt apt 3.2.0 install ok installed base-files base-files 14 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-2 install ok installed bsdutils bsdutils 1:2.42-4 install ok installed coreutils coreutils 9.10-1 install ok installed dash dash 0.5.12-12 install ok installed debconf debconf 1.5.92 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dpkg dpkg 1.23.7 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-16-base:amd64 gcc-16-base 16-20260425-1 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.2.0 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.42-4 install ok installed libbsd0:amd64 libbsd0 0.12.2-2+b1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b2 install ok installed libc-bin libc-bin 2.42-15 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-15 install ok installed libc6:amd64 libc6 2.42-15 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.3-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1+b1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11+b1 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.282+b3 install ok installed libgcc-s1:amd64 libgcc-s1 16-20260425-1 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b1 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-10 install ok installed liblzma5:amd64 liblzma5 5.8.3-1 install ok installed libmd0:amd64 libmd0 1.1.0-2+b2 install ok installed libmount1:amd64 libmount1 2.42-4 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1+b1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b1 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b1 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.10-1 install ok installed libsemanage-common libsemanage-common 3.10-1 install ok installed libsemanage2:amd64 libsemanage2 3.10-1 install ok installed libsepol2:amd64 libsepol2 3.10-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.42-4 install ok installed libssl3t64:amd64 libssl3t64 3.6.2-1 install ok installed libstdc++6:amd64 libstdc++6 16-20260425-1 install ok installed libsystemd0:amd64 libsystemd0 260.1-1 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1 install ok installed libudev1:amd64 libudev1 260.1-1 install ok installed libuuid1:amd64 libuuid1 2.42-4 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b1 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b1 install ok installed login login 1:4.16.0-2+really2.42-4 install ok installed login.defs login.defs 1:4.19.3-2 install ok installed mawk mawk 1.3.4.20260302-1 install ok installed mount mount 2.42-4 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.6.2-1 install ok installed passwd passwd 1:4.19.3-2 install ok installed perl-base perl-base 5.40.1-7+b1 install ok installed sed sed 4.9-3 install ok installed sqv sqv 1.3.0-5+b1 install ok installed sysvinit-utils sysvinit-utils 3.18-1 install ok installed tar tar 1.35+dfsg-4 install ok installed tzdata tzdata 2026b-1 install ok installed util-linux util-linux 2.42-4 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.2-3 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m7.6s DEBUG: Loading chroot meta data from /srv/piuparts.debian.org/slave/refchroot/sid2experimental/reference-chroot-metadata.dat 0m7.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m8.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m8.1s INFO: Running scripts is_testable 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/is_testable_uninstallable'] 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/is_testable_uninstallable'] 0m8.1s INFO: Running scripts pre_test 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_test_exceptions'] 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_test_exceptions'] 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_test_root_password'] 0m8.1s DUMP: New password: Retype new password: passwd: password updated successfully 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_test_root_password'] 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'show', '--no-all-versions', 'perl'] 0m8.3s DUMP: Package: perl Source: perl (5.40.1-7) Version: 5.40.1-7+b1 Installed-Size: 838 Maintainer: Niko Tyni Architecture: amd64 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02) Depends: perl-base (= 5.40.1-7+b1), perl-modules-5.40 (>= 5.40.1-7), libperl5.40 (= 5.40.1-7+b1) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Conflicts: libjson-pp-perl (<< 2.27200-2) Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Description-en: Larry Wall's Practical Extraction and Report Language Perl is a highly capable, feature-rich programming language with over 20 years of development. Perl 5 runs on over 100 platforms from portables to mainframes. Perl is suitable for both rapid prototyping and large scale development projects. . Perl 5 supports many programming styles, including procedural, functional, and object-oriented. In addition to this, it is supported by an ever-growing collection of reusable modules which accelerate development. Some of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Description-md5: 603cb1e5fe66da8106c364f4e9b84082 Multi-Arch: allowed Homepage: https://dev.perl.org/perl5/ Build-Essential: yes Tag: devel::interpreter, devel::lang:perl, devel::library, implemented-in::c, implemented-in::perl, interface::commandline, role::devel-lib, role::metapackage, role::program Section: perl Priority: standard Filename: pool/main/p/perl/perl_5.40.1-7+b1_amd64.deb Size: 264096 MD5sum: 55f55d6a0ff9332410bb256a8aa279d5 SHA256: 05ddd261f36c337ab2dfac55fd5cdd07b1f8926ba3b87695d81de017173630a0 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'show', '--no-all-versions', 'perl'] 0m8.3s INFO: apt-cache knows about the following packages: perl 0m8.3s INFO: Running scripts pre_install 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m8.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m8.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m8.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m8.4s DUMP: perl: Installed: (none) Candidate: 5.40.1-7+b1 Version table: 5.40.1-7+b1 500 500 http://deb.debian.org/debian sid/main amd64 Packages 0m8.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m8.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', 'install', 'perl'] 0m10.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: libgdbm-compat4t64 libgdbm6t64 libperl5.40 perl-modules-5.40 Suggested packages: gdbm-l10n sensible-utils perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libtap-harness-archive-perl Recommended packages: netbase The following NEW packages will be installed: libgdbm-compat4t64 libgdbm6t64 libperl5.40 perl perl-modules-5.40 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 7727 kB of archives. After this operation, 51.6 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian sid/main amd64 perl-modules-5.40 all 5.40.1-7 [3012 kB] Get:2 http://deb.debian.org/debian sid/main amd64 libgdbm6t64 amd64 1.26-1+b1 [78.9 kB] Get:3 http://deb.debian.org/debian sid/main amd64 libgdbm-compat4t64 amd64 1.26-1+b1 [53.1 kB] Get:4 http://deb.debian.org/debian sid/main amd64 libperl5.40 amd64 5.40.1-7+b1 [4319 kB] Get:5 http://deb.debian.org/debian sid/main amd64 perl amd64 5.40.1-7+b1 [264 kB] Fetched 7727 kB in 0s (20.9 MB/s) Selecting previously unselected package perl-modules-5.40. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4906 files and directories currently installed.) Preparing to unpack .../perl-modules-5.40_5.40.1-7_all.deb ... Unpacking perl-modules-5.40 (5.40.1-7) ... Selecting previously unselected package libgdbm6t64:amd64. Preparing to unpack .../libgdbm6t64_1.26-1+b1_amd64.deb ... Unpacking libgdbm6t64:amd64 (1.26-1+b1) ... Selecting previously unselected package libgdbm-compat4t64:amd64. Preparing to unpack .../libgdbm-compat4t64_1.26-1+b1_amd64.deb ... Unpacking libgdbm-compat4t64:amd64 (1.26-1+b1) ... Selecting previously unselected package libperl5.40:amd64. Preparing to unpack .../libperl5.40_5.40.1-7+b1_amd64.deb ... Unpacking libperl5.40:amd64 (5.40.1-7+b1) ... Selecting previously unselected package perl. Preparing to unpack .../perl_5.40.1-7+b1_amd64.deb ... Unpacking perl (5.40.1-7+b1) ... Setting up libgdbm6t64:amd64 (1.26-1+b1) ... Setting up libgdbm-compat4t64:amd64 (1.26-1+b1) ... Setting up perl-modules-5.40 (5.40.1-7) ... Setting up libperl5.40:amd64 (5.40.1-7+b1) ... Setting up perl (5.40.1-7+b1) ... Processing triggers for libc-bin (2.42-15) ... 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', 'install', 'perl'] 0m10.3s INFO: Running scripts post_install 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m10.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m10.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m10.9s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpv49on3fs to experimental 0m10.9s DEBUG: sources.list: deb http://deb.debian.org/debian/ sid main deb http://deb.debian.org/debian/ experimental main 0m10.9s INFO: Running scripts pre_distupgrade 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_allow_unauthenticated'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_allow_unauthenticated'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'update'] 0m12.3s DUMP: Hit:1 http://deb.debian.org/debian sid InRelease Get:2 http://deb.debian.org/debian experimental InRelease [91.7 kB] Get:3 http://deb.debian.org/debian experimental/main amd64 Packages [435 kB] Get:4 http://deb.debian.org/debian experimental/main Translation-en [238 kB] Fetched 765 kB in 1s (1381 kB/s) Reading package lists... 0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'update'] 0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-yf', 'dist-upgrade'] 0m12.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-yf', 'dist-upgrade'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m13.2s DUMP: dbf578af82477e590ffb5bea026d6948 - 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m13.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'show', '--no-all-versions', 'perl'] 0m13.4s DUMP: Package: perl Source: perl (5.40.1-7) Version: 5.40.1-7+b1 Installed-Size: 838 Maintainer: Niko Tyni Architecture: amd64 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02) Depends: perl-base (= 5.40.1-7+b1), perl-modules-5.40 (>= 5.40.1-7), libperl5.40 (= 5.40.1-7+b1) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Conflicts: libjson-pp-perl (<< 2.27200-2) Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Description-en: Larry Wall's Practical Extraction and Report Language Perl is a highly capable, feature-rich programming language with over 20 years of development. Perl 5 runs on over 100 platforms from portables to mainframes. Perl is suitable for both rapid prototyping and large scale development projects. . Perl 5 supports many programming styles, including procedural, functional, and object-oriented. In addition to this, it is supported by an ever-growing collection of reusable modules which accelerate development. Some of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Description-md5: 603cb1e5fe66da8106c364f4e9b84082 Multi-Arch: allowed Homepage: https://dev.perl.org/perl5/ Build-Essential: yes Tag: devel::interpreter, devel::lang:perl, devel::library, implemented-in::c, implemented-in::perl, interface::commandline, role::devel-lib, role::metapackage, role::program Section: perl Priority: standard Filename: pool/main/p/perl/perl_5.40.1-7+b1_amd64.deb Size: 264096 MD5sum: 55f55d6a0ff9332410bb256a8aa279d5 SHA256: 05ddd261f36c337ab2dfac55fd5cdd07b1f8926ba3b87695d81de017173630a0 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'show', '--no-all-versions', 'perl'] 0m13.4s INFO: apt-cache knows about the following packages: perl 0m13.4s INFO: Running scripts pre_install 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m13.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 1 http://deb.debian.org/debian experimental/main amd64 Packages release o=Debian,a=experimental,n=rc-buggy,l=Debian,c=main,b=amd64 origin deb.debian.org 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m13.6s DUMP: perl: Installed: 5.40.1-7+b1 Candidate: 5.40.1-7+b1 Version table: 5.42.2-1 1 1 http://deb.debian.org/debian experimental/main amd64 Packages *** 5.40.1-7+b1 500 500 http://deb.debian.org/debian sid/main amd64 Packages 100 /var/lib/dpkg/status 0m13.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m13.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl'] 0m16.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following packages were automatically installed and are no longer required: libperl5.40 perl-modules-5.40 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libperl5.42 perl-base perl-modules-5.42 Suggested packages: sensible-utils The following NEW packages will be installed: libperl5.42 perl-modules-5.42 The following packages will be upgraded: perl perl-base 2 upgraded, 2 newly installed, 0 to remove and 7 not upgraded. Need to get 9590 kB of archives. After this operation, 50.0 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian experimental/main amd64 perl-modules-5.42 all 5.42.2-1 [3209 kB] Get:2 http://deb.debian.org/debian experimental/main amd64 libperl5.42 amd64 5.42.2-1 [4263 kB] Get:3 http://deb.debian.org/debian experimental/main amd64 perl amd64 5.42.2-1 [265 kB] Get:4 http://deb.debian.org/debian experimental/main amd64 perl-base amd64 5.42.2-1 [1852 kB] Fetched 9590 kB in 1s (6440 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 7075 files and directories currently installed.) Preparing to unpack .../perl_5.42.2-1_amd64.deb ... Unpacking perl (5.42.2-1) over (5.40.1-7+b1) ... Selecting previously unselected package perl-modules-5.42. Preparing to unpack .../perl-modules-5.42_5.42.2-1_all.deb ... Unpacking perl-modules-5.42 (5.42.2-1) ... Selecting previously unselected package libperl5.42:amd64. Preparing to unpack .../libperl5.42_5.42.2-1_amd64.deb ... Unpacking libperl5.42:amd64 (5.42.2-1) ... Preparing to unpack .../perl-base_5.42.2-1_amd64.deb ... Unpacking perl-base (5.42.2-1) over (5.40.1-7+b1) ... Setting up perl-base (5.42.2-1) ... Setting up perl-modules-5.42 (5.42.2-1) ... Setting up libperl5.42:amd64 (5.42.2-1) ... Setting up perl (5.42.2-1) ... Processing triggers for libc-bin (2.42-15) ... 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl'] 0m16.8s INFO: Running scripts post_install 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m16.8s INFO: Running scripts post_distupgrade 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_exceptions'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_exceptions'] 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_zz_backports'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_distupgrade_zz_backports'] 0m16.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m17.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m17.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m18.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m18.1s INFO: Running scripts pre_install 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_database-server'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_exceptions'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_extras'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m18.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 1 http://deb.debian.org/debian experimental/main amd64 Packages release o=Debian,a=experimental,n=rc-buggy,l=Debian,c=main,b=amd64 origin deb.debian.org 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m18.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy'] 0m18.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m18.2s DUMP: perl: Installed: 5.42.2-1 Candidate: 5.42.2-1 Version table: *** 5.42.2-1 100 1 http://deb.debian.org/debian experimental/main amd64 Packages 100 /var/lib/dpkg/status 5.40.1-7+b1 500 500 http://deb.debian.org/debian sid/main amd64 Packages 0m18.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-cache', 'policy', 'perl'] 0m18.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl=5.42.2-1'] 0m18.7s DUMP: Reading package lists... Building dependency tree... Reading state information... perl is already the newest version (5.42.2-1). Solving dependencies... The following packages were automatically installed and are no longer required: libperl5.40 perl-modules-5.40 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded. 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '-t', 'experimental', 'install', 'perl=5.42.2-1'] 0m18.7s INFO: Running scripts post_install 0m18.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m18.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_install_exceptions'] 0m18.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m19.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m19.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', '-ac', '--ignore-obsolete'] 0m21.0s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', '-ac', '--ignore-obsolete'] 0m21.0s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m21.0s DUMP: 0.15.9~deb12u1 0m21.0s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m21.0s INFO: Running adequate version 0.15.9~deb12u1 now. 0m21.0s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'perl'] 0m21.3s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'perl'] 0m21.3s INFO: Running scripts pre_remove 0m21.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m21.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m21.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m21.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m21.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m21.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m21.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m22.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m22.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m22.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m22.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_exceptions'] 0m22.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/pre_remove_exceptions'] 0m22.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m22.1s DUMP: install ok installed apt apt 3.2.0 install ok installed base-files base-files 14 install ok installed base-passwd base-passwd 3.6.8 install ok installed bash bash 5.3-2 install ok installed bsdutils bsdutils 1:2.42-4 install ok installed coreutils coreutils 9.10-1 install ok installed dash dash 0.5.12-12 install ok installed debconf debconf 1.5.92 install ok installed debian-archive-keyring debian-archive-keyring 2025.1 install ok installed debianutils debianutils 5.23.2 install ok installed diffutils diffutils 1:3.12-1 install ok installed dpkg dpkg 1.23.7 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-16-base:amd64 gcc-16-base 16-20260425-1 install ok installed grep grep 3.12-1 install ok installed gzip gzip 1.13-1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.69 install ok installed libacl1:amd64 libacl1 2.3.2-3 install ok installed libapt-pkg7.0:amd64 libapt-pkg7.0 3.2.0 install ok installed libattr1:amd64 libattr1 1:2.5.2-4 install ok installed libaudit-common libaudit-common 1:4.1.2-1 install ok installed libaudit1:amd64 libaudit1 1:4.1.2-1+b1 install ok installed libblkid1:amd64 libblkid1 2.42-4 install ok installed libbsd0:amd64 libbsd0 0.12.2-2+b1 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6+b2 install ok installed libc-bin libc-bin 2.42-15 install ok installed libc-gconv-modules-extra:amd64 libc-gconv-modules-extra 2.42-15 install ok installed libc6:amd64 libc6 2.42-15 install ok installed libcap-ng0:amd64 libcap-ng0 0.9.3-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.5.1-1+b1 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-11+b1 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.282+b3 install ok installed libgcc-s1:amd64 libgcc-s1 16-20260425-1 install ok installed libgdbm-compat4t64:amd64 libgdbm-compat4t64 1.26-1+b1 install ok installed libgdbm6t64:amd64 libgdbm6t64 1.26-1+b1 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-5+b1 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10.2-1+b1 install ok installed liblz4-1:amd64 liblz4-1 1.10.0-10 install ok installed liblzma5:amd64 liblzma5 5.8.3-1 install ok installed libmd0:amd64 libmd0 1.1.0-2+b2 install ok installed libmount1:amd64 libmount1 2.42-4 install ok installed libnettle8t64:amd64 libnettle8t64 3.10.2-1+b1 install ok installed libpam-modules:amd64 libpam-modules 1.7.0-5+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.7.0-5+b1 install ok installed libpam-runtime libpam-runtime 1.7.0-5 install ok installed libpam0g:amd64 libpam0g 1.7.0-5+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.46-1+b1 install ok installed libperl5.40:amd64 libperl5.40 5.40.1-7+b1 install ok installed libperl5.42:amd64 libperl5.42 5.42.2-1 install ok installed libseccomp2:amd64 libseccomp2 2.6.0-2+b1 install ok installed libselinux1:amd64 libselinux1 3.10-1 install ok installed libsemanage-common libsemanage-common 3.10-1 install ok installed libsemanage2:amd64 libsemanage2 3.10-1 install ok installed libsepol2:amd64 libsepol2 3.10-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.42-4 install ok installed libssl3t64:amd64 libssl3t64 3.6.2-1 install ok installed libstdc++6:amd64 libstdc++6 16-20260425-1 install ok installed libsystemd0:amd64 libsystemd0 260.1-1 install ok installed libtinfo6:amd64 libtinfo6 6.6+20251231-1 install ok installed libudev1:amd64 libudev1 260.1-1 install ok installed libuuid1:amd64 libuuid1 2.42-4 install ok installed libxxhash0:amd64 libxxhash0 0.8.3-2+b1 install ok installed libzstd1:amd64 libzstd1 1.5.7+dfsg-3+b1 install ok installed login login 1:4.16.0-2+really2.42-4 install ok installed login.defs login.defs 1:4.19.3-2 install ok installed mawk mawk 1.3.4.20260302-1 install ok installed mount mount 2.42-4 install ok installed ncurses-base ncurses-base 6.6+20251231-1 install ok installed ncurses-bin ncurses-bin 6.6+20251231-1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.6.2-1 install ok installed passwd passwd 1:4.19.3-2 install ok installed perl perl 5.42.2-1 install ok installed perl-base perl-base 5.42.2-1 install ok installed perl-modules-5.40 perl-modules-5.40 5.40.1-7 install ok installed perl-modules-5.42 perl-modules-5.42 5.42.2-1 install ok installed sed sed 4.9-3 install ok installed sqv sqv 1.3.0-5+b1 install ok installed sysvinit-utils sysvinit-utils 3.18-1 install ok installed tar tar 1.35+dfsg-4 install ok installed tzdata tzdata 2026b-1 install ok installed util-linux util-linux 2.42-4 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.2-3 0m22.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m22.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'perl-base=5.40.1-7+b1', 'libgdbm-compat4t64:amd64-', 'libgdbm6t64:amd64-', 'libperl5.40:amd64-', 'libperl5.42:amd64-', 'perl-modules-5.40-', 'perl-modules-5.42-', 'perl-'] 0m23.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following packages will be REMOVED: libgdbm-compat4t64 libgdbm6t64 libperl5.40 libperl5.42 perl perl-modules-5.40 perl-modules-5.42 The following packages will be DOWNGRADED: perl-base 0 upgraded, 0 newly installed, 1 downgraded, 7 to remove and 0 not upgraded. Need to get 1676 kB of archives. After this operation, 102 MB disk space will be freed. Get:1 http://deb.debian.org/debian sid/main amd64 perl-base amd64 5.40.1-7+b1 [1676 kB] Fetched 1676 kB in 0s (6454 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9284 files and directories currently installed.) Removing perl (5.42.2-1) ... Removing libperl5.42:amd64 (5.42.2-1) ... Removing perl-modules-5.42 (5.42.2-1) ... dpkg: warning: downgrading perl-base (5.42.2-1) to (5.40.1-7+b1) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 7071 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-7+b1_amd64.deb ... Unpacking perl-base (5.40.1-7+b1) over (5.42.2-1) ... Setting up perl-base (5.40.1-7+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 7011 files and directories currently installed.) Removing libperl5.40:amd64 (5.40.1-7+b1) ... Removing libgdbm-compat4t64:amd64 (1.26-1+b1) ... Removing libgdbm6t64:amd64 (1.26-1+b1) ... Removing perl-modules-5.40 (5.40.1-7) ... Processing triggers for libc-bin (2.42-15) ... W: --force-yes is deprecated, use one of the options starting with --allow instead. 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'perl-base=5.40.1-7+b1', 'libgdbm-compat4t64:amd64-', 'libgdbm6t64:amd64-', 'libperl5.40:amd64-', 'libperl5.42:amd64-', 'perl-modules-5.40-', 'perl-modules-5.42-', 'perl-'] 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '--no-install-recommends', '--reinstall', 'install', 'perl-base=5.40.1-7+b1'] 0m24.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Solving dependencies... 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/1676 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 4909 files and directories currently installed.) Preparing to unpack .../perl-base_5.40.1-7+b1_amd64.deb ... Unpacking perl-base (5.40.1-7+b1) over (5.40.1-7+b1) ... Setting up perl-base (5.40.1-7+b1) ... 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', '-y', '--no-install-recommends', '--reinstall', 'install', 'perl-base=5.40.1-7+b1'] 0m24.5s INFO: Running scripts post_remove 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_remove_exceptions'] 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_remove_exceptions'] 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libperl5.40:amd64', 'libperl5.42:amd64', 'perl-modules-5.40', 'perl-modules-5.42'] 0m24.5s DUMP: dpkg: warning: ignoring request to remove libgdbm-compat4t64 which is not installed dpkg: warning: ignoring request to remove libgdbm6t64 which is not installed dpkg: warning: ignoring request to remove libperl5.40 which is not installed dpkg: warning: ignoring request to remove libperl5.42 which is not installed dpkg: warning: ignoring request to remove perl-modules-5.40 which is not installed dpkg: warning: ignoring request to remove perl-modules-5.42 which is not installed 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libperl5.40:amd64', 'libperl5.42:amd64', 'perl-modules-5.40', 'perl-modules-5.42'] 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', 'perl'] 0m24.5s DUMP: (Reading database ... 4909 files and directories currently installed.) Purging configuration files for perl (5.42.2-1) ... 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', 'perl'] 0m24.5s INFO: Running scripts post_purge 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_purge_exceptions'] 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_purge_exceptions'] 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', '--pending'] 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--purge', '--pending'] 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--remove', '--pending'] 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg', '--remove', '--pending'] 0m24.5s INFO: Running scripts post_test 0m24.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_test_exceptions'] 0m24.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'tmp/scripts/post_test_exceptions'] 0m24.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m25.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m25.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-divert', '--list'] 0m25.0s DUMP: local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m25.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'dpkg-divert', '--list'] 0m25.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'clean'] 0m25.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpv49on3fs', 'apt-get', 'clean'] 0m25.0s DEBUG: Recording chroot state 0m26.2s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/shm'] 0m26.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/shm'] 0m26.2s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/console'] 0m26.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/console'] 0m26.2s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/ptmx'] 0m26.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/ptmx'] 0m26.2s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts'] 0m26.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/dev/pts'] 0m26.2s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/proc'] 0m26.3s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpv49on3fs/proc'] 0m26.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m26.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpv49on3fs'] 0m26.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpv49on3fs 0m26.4s INFO: PASS: Upgrading between Debian distributions. 0m26.4s INFO: PASS: All tests. 0m26.4s INFO: piuparts run ends. ret=0 End: 2026-04-25 21:36:40 GMT