Start: 2014-02-20 15:12:58 UTC Package: amanda-server Priority: optional Section: utils Installed-Size: 1348 Maintainer: Bdale Garbee Architecture: amd64 Source: amanda Version: 1:2.6.1p2-3 Replaces: amanda-common (<< 1:2.5.2p1-3) Depends: libc6 (>= 2.3), libglib2.0-0 (>= 2.16.0), libncurses5 (>= 5.7+20100313), libreadline6 (>= 6.0), amanda-common (= 1:2.6.1p2-3), bsd-mailx | mailx Suggests: perl5, gnuplot, amanda-client (= 1:2.6.1p2-3), cpio | mt-st Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3) Filename: pool/main/a/amanda/amanda-server_2.6.1p2-3_amd64.deb Size: 445890 MD5sum: 6a6c71c26aa8bd5549e366d0de7eaa6a SHA1: 39e9aaab2dfea3ddad26709532bab6ee8001f0ca SHA256: 9a2a61046f110ff4a7aba1c481d78afc4ef19c438f2abd19bad592fd038c13a9 Description: Advanced Maryland Automatic Network Disk Archiver (Server) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as we can write files to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . For important notes, see /usr/share/doc/amanda-server/README.Debian. . Explanation of suggested programs: - perl is needed for some non essential server utilities - gnuplot is needed for plotting statistics of backups - to backup the tape server, you need to install the client too Tag: admin::backup, hardware::storage, implemented-in::c, interface::daemon, network::server, network::service, role::program, uitoolkit::ncurses, works-with::archive, works-with-format::tar Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt amanda-server=1:2.6.1p2-3 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt amanda-server=1:2.6.1p2-3 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp2fsbLc 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp2fsbLc 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'update'] 0m3.4s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 0s (9181 kB/s) Reading package lists... 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'update'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (47.2 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Feb 20 15:13:02 UTC 2014. Universal Time is now: Thu Feb 20 15:13:02 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp2fsbLc/tmp/scripts/ 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp2fsbLc/tmp/scripts/ 0m4.4s INFO: Running scripts post_setup 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (11.6 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--get-selections', '*'] 0m5.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--get-selections', '*'] 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-divert', '--list'] 0m5.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-divert', '--list'] 0m5.8s INFO: apt-cache does not know about any of the requested packages 0m5.8s INFO: Running scripts pre_test 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_test_root_password'] 0m5.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_test_root_password'] 0m5.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m6.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m6.8s DEBUG: No broken symlinks as far as we can find. 0m6.8s INFO: Running scripts pre_install 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_database-server'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_database-server'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_exceptions'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_exceptions'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_extras'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_extras'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'show', 'amanda-server=1:2.6.1p2-3'] 0m6.9s DUMP: Package: amanda-server Priority: optional Section: utils Installed-Size: 1348 Maintainer: Bdale Garbee Architecture: amd64 Source: amanda Version: 1:2.6.1p2-3 Replaces: amanda-common (<< 1:2.5.2p1-3) Depends: libc6 (>= 2.3), libglib2.0-0 (>= 2.16.0), libncurses5 (>= 5.7+20100313), libreadline6 (>= 6.0), amanda-common (= 1:2.6.1p2-3), bsd-mailx | mailx Suggests: perl5, gnuplot, amanda-client (= 1:2.6.1p2-3), cpio | mt-st Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3) Filename: pool/main/a/amanda/amanda-server_2.6.1p2-3_amd64.deb Size: 445890 MD5sum: 6a6c71c26aa8bd5549e366d0de7eaa6a SHA1: 39e9aaab2dfea3ddad26709532bab6ee8001f0ca SHA256: 9a2a61046f110ff4a7aba1c481d78afc4ef19c438f2abd19bad592fd038c13a9 Description: Advanced Maryland Automatic Network Disk Archiver (Server) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as we can write files to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . For important notes, see /usr/share/doc/amanda-server/README.Debian. . Explanation of suggested programs: - perl is needed for some non essential server utilities - gnuplot is needed for plotting statistics of backups - to backup the tape server, you need to install the client too Tag: admin::backup, hardware::storage, implemented-in::c, interface::daemon, network::server, network::service, role::program, uitoolkit::ncurses, works-with::archive, works-with-format::tar 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'show', 'amanda-server=1:2.6.1p2-3'] 0m6.9s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libglib2.0-0 (>= 2.16.0), libncurses5 (>= 5.7+20100313), libreadline6 (>= 6.0), amanda-common (= 1:2.6.1p2-3), bsd-mailx | mailx Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3) 0m6.9s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpJAhnSa/piuparts-depends-dummy'] 0m6.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpJAhnSa/piuparts-depends-dummy.deb'. 0m6.9s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpJAhnSa/piuparts-depends-dummy'] 0m6.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpJAhnSa/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp2fsbLc/tmp 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libglib2.0-0 (>= 2.16.0); however: Package libglib2.0-0 is not installed. piuparts-depends-dummy depends on amanda-common (= 1:2.6.1p2-3); however: Package amanda-common is not installed. piuparts-depends-dummy depends on bsd-mailx | mailx; however: Package bsd-mailx is not installed. Package mailx is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-yf', 'install'] 0m12.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: amanda-common bsd-mailx cron exim4-base exim4-config exim4-daemon-light libdb4.7 libfile-copy-recursive-perl libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 liblockfile1 libpcre3 libtasn1-3 libwrap0 netbase openbsd-inetd perl perl-modules tcpd update-inetd Suggested packages: amanda-server amanda-client anacron logrotate checksecurity mail-reader eximon4 exim4-doc-html exim4-doc-info gnutls-bin openssl file spf-tools-perl swaks rng-tools perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: exim4 postfix mail-transport-agent lockfile-progs psmisc mailx libglib2.0-data shared-mime-info ifupdown The following NEW packages will be installed: amanda-common bsd-mailx cron exim4-base exim4-config exim4-daemon-light libdb4.7 libfile-copy-recursive-perl libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 liblockfile1 libpcre3 libtasn1-3 libwrap0 netbase openbsd-inetd perl perl-modules tcpd update-inetd 0 upgraded, 23 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 15.0 MB of archives. After this operation, 52.7 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libpcre3 amd64 8.02-1.1 [234 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libglib2.0-0 amd64 2.24.2-1 [1122 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libfile-copy-recursive-perl all 0.38-1 [20.6 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main update-inetd all 4.38+nmu1+squeeze1 [20.6 kB] Get:9 http://mirror.bm.debian.org/debian/ squeeze/main liblockfile1 amd64 1.08-4 [20.6 kB] Get:10 http://mirror.bm.debian.org/debian/ squeeze/main cron amd64 3.0pl1-116 [98.5 kB] Get:11 http://mirror.bm.debian.org/debian/ squeeze/main exim4-config all 4.72-6+squeeze3 [462 kB] Get:12 http://mirror.bm.debian.org/debian/ squeeze/main netbase all 4.45 [20.7 kB] Get:13 http://mirror.bm.debian.org/debian/ squeeze/main exim4-base amd64 4.72-6+squeeze3 [1016 kB] Get:14 http://mirror.bm.debian.org/debian/ squeeze/main libgpg-error0 amd64 1.6-1 [43.9 kB] Get:15 http://mirror.bm.debian.org/debian/ squeeze/main libgcrypt11 amd64 1.4.5-2+squeeze1 [282 kB] Get:16 http://mirror.bm.debian.org/debian/ squeeze/main libtasn1-3 amd64 2.7-1+squeeze+1 [63.1 kB] Get:17 http://mirror.bm.debian.org/debian/ squeeze/main libgnutls26 amd64 2.8.6-1+squeeze2 [564 kB] Get:18 http://mirror.bm.debian.org/debian/ squeeze/main exim4-daemon-light amd64 4.72-6+squeeze3 [594 kB] Get:19 http://mirror.bm.debian.org/debian/ squeeze/main bsd-mailx amd64 8.1.2-0.20100314cvs-1 [83.8 kB] Get:20 http://mirror.bm.debian.org/debian/ squeeze/main libwrap0 amd64 7.6.q-19 [51.2 kB] Get:21 http://mirror.bm.debian.org/debian/ squeeze/main tcpd amd64 7.6.q-19 [38.6 kB] Get:22 http://mirror.bm.debian.org/debian/ squeeze/main openbsd-inetd amd64 0.20080125-6 [37.8 kB] Get:23 http://mirror.bm.debian.org/debian/ squeeze/main amanda-common amd64 1:2.6.1p2-3 [1591 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 15.0 MB in 0s (19.2 MB/s) Selecting previously deselected package libpcre3. (Reading database ... 6258 files and directories currently installed.) Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libfile-copy-recursive-perl. Unpacking libfile-copy-recursive-perl (from .../libfile-copy-recursive-perl_0.38-1_all.deb) ... Selecting previously deselected package update-inetd. Unpacking update-inetd (from .../update-inetd_4.38+nmu1+squeeze1_all.deb) ... Selecting previously deselected package liblockfile1. Unpacking liblockfile1 (from .../liblockfile1_1.08-4_amd64.deb) ... Selecting previously deselected package cron. Unpacking cron (from .../cron_3.0pl1-116_amd64.deb) ... Selecting previously deselected package exim4-config. Unpacking exim4-config (from .../exim4-config_4.72-6+squeeze3_all.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../archives/netbase_4.45_all.deb) ... Selecting previously deselected package exim4-base. Unpacking exim4-base (from .../exim4-base_4.72-6+squeeze3_amd64.deb) ... Selecting previously deselected package libgpg-error0. Unpacking libgpg-error0 (from .../libgpg-error0_1.6-1_amd64.deb) ... Selecting previously deselected package libgcrypt11. Unpacking libgcrypt11 (from .../libgcrypt11_1.4.5-2+squeeze1_amd64.deb) ... Selecting previously deselected package libtasn1-3. Unpacking libtasn1-3 (from .../libtasn1-3_2.7-1+squeeze+1_amd64.deb) ... Selecting previously deselected package libgnutls26. Unpacking libgnutls26 (from .../libgnutls26_2.8.6-1+squeeze2_amd64.deb) ... Selecting previously deselected package exim4-daemon-light. Unpacking exim4-daemon-light (from .../exim4-daemon-light_4.72-6+squeeze3_amd64.deb) ... Selecting previously deselected package bsd-mailx. Unpacking bsd-mailx (from .../bsd-mailx_8.1.2-0.20100314cvs-1_amd64.deb) ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6.q-19_amd64.deb) ... Selecting previously deselected package tcpd. Unpacking tcpd (from .../tcpd_7.6.q-19_amd64.deb) ... Selecting previously deselected package openbsd-inetd. Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-6_amd64.deb) ... Selecting previously deselected package amanda-common. Unpacking amanda-common (from .../amanda-common_1%3a2.6.1p2-3_amd64.deb) ... Setting up libpcre3 (8.02-1.1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up liblockfile1 (1.08-4) ... Setting up cron (3.0pl1-116) ... Adding group `crontab' (GID 102) ... Done. invoke-rc.d: policy-rc.d denied execution of start. Setting up exim4-config (4.72-6+squeeze3) ... Adding system-user for exim (v4) Setting up netbase (4.45) ... Setting up exim4-base (4.72-6+squeeze3) ... Setting up libgpg-error0 (1.6-1) ... Setting up libgcrypt11 (1.4.5-2+squeeze1) ... Setting up libtasn1-3 (2.7-1+squeeze+1) ... Setting up libgnutls26 (2.8.6-1+squeeze2) ... Setting up exim4-daemon-light (4.72-6+squeeze3) ... invoke-rc.d: policy-rc.d denied execution of start. Setting up bsd-mailx (8.1.2-0.20100314cvs-1) ... update-alternatives: using /usr/bin/bsd-mailx to provide /usr/bin/mailx (mailx) in auto mode. Setting up libwrap0 (7.6.q-19) ... Setting up tcpd (7.6.q-19) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libfile-copy-recursive-perl (0.38-1) ... Setting up update-inetd (4.38+nmu1+squeeze1) ... Setting up openbsd-inetd (0.20080125-6) ... invoke-rc.d: policy-rc.d denied execution of stop. invoke-rc.d: policy-rc.d denied execution of start. Setting up amanda-common (1:2.6.1p2-3) ... backup:x:34:34:backup:/var/backups:/bin/sh Adding user `backup' to group `disk' ... Adding user backup to group disk Done. Adding user `backup' to group `tape' ... Adding user backup to group tape Done. Setting up piuparts-depends-dummy (0.invalid.0) ... 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-yf', 'install'] 0m12.8s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m12.8s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp2fsbLc/tmp/piuparts-depends-dummy.deb 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m12.8s DUMP: piuparts-depends-dummy install ok installed 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m12.8s DUMP: (Reading database ... 8229 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m13.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m13.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m14.7s DEBUG: No broken symlinks as far as we can find. 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'policy'] 0m14.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m14.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'policy'] 0m14.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'policy', 'amanda-server'] 0m14.8s DUMP: amanda-server: Installed: (none) Candidate: 1:2.6.1p2-3 Version table: 1:2.6.1p2-3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m14.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-cache', 'policy', 'amanda-server'] 0m14.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-y', 'install', 'amanda-server=1:2.6.1p2-3'] 0m15.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: gnuplot amanda-client cpio mt-st The following NEW packages will be installed: amanda-server 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 446 kB of archives. After this operation, 1380 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main amanda-server amd64 1:2.6.1p2-3 [446 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 446 kB in 0s (8294 kB/s) Selecting previously deselected package amanda-server. (Reading database ... 8229 files and directories currently installed.) Unpacking amanda-server (from .../amanda-server_1%3a2.6.1p2-3_amd64.deb) ... Setting up amanda-server (1:2.6.1p2-3) ... invoke-rc.d: policy-rc.d denied execution of start. invoke-rc.d: policy-rc.d denied execution of restart. 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', '-y', 'install', 'amanda-server=1:2.6.1p2-3'] 0m15.8s INFO: Running scripts post_install 0m15.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m16.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m17.1s DEBUG: No broken symlinks as far as we can find. 0m17.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--get-selections', '*'] 0m17.2s DUMP: adduser install amanda-common install amanda-server install apt install base-files install base-passwd install bash install bsd-mailx install bsdutils install coreutils install cron install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install exim4-base install exim4-config install exim4-daemon-light install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.7 install libdb4.8 install libfile-copy-recursive-perl install libgcc1 install libgcrypt11 install libgdbm3 install libglib2.0-0 install libgnutls26 install libgpg-error0 install liblocale-gettext-perl install liblockfile1 install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtasn1-3 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install libwrap0 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install netbase install openbsd-inetd install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tcpd install tzdata install ucf install update-inetd install util-linux install xz-utils install zlib1g install 0m17.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--get-selections', '*'] 0m17.9s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', '-ac'] 0m18.6s DUMP: debsums: no md5sums for mawk debsums: no md5sums for netbase 0m18.6s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', '-ac'] 0m18.6s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m18.6s DUMP: 0.11.3~bpo70+1 0m18.6s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m18.6s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m18.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'amanda-server'] 0m18.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'amanda-server'] 0m18.8s INFO: Running scripts pre_remove 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_exceptions'] 0m19.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/pre_remove_exceptions'] 0m19.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'remove', 'libglib2.0-0', 'liblockfile1', 'tcpd', 'cron', 'perl', 'exim4-base', 'libgpg-error0', 'perl-modules', 'libwrap0', 'netbase', 'libgdbm3', 'amanda-common', 'update-inetd', 'bsd-mailx', 'libpcre3', 'libfile-copy-recursive-perl', 'openbsd-inetd', 'libgcrypt11', 'libdb4.7', 'libgnutls26', 'exim4-config', 'libtasn1-3', 'exim4-daemon-light', 'amanda-server'] 0m20.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: amanda-common amanda-server bsd-mailx cron exim4-base exim4-config exim4-daemon-light libdb4.7 libfile-copy-recursive-perl libgcrypt11 libgdbm3 libglib2.0-0 libgnutls26 libgpg-error0 liblockfile1 libpcre3 libtasn1-3 libwrap0 netbase openbsd-inetd perl perl-modules tcpd update-inetd 0 upgraded, 0 newly installed, 24 to remove and 0 not upgraded. After this operation, 54.1 MB disk space will be freed. (Reading database ... 8307 files and directories currently installed.) Removing amanda-server ... invoke-rc.d: policy-rc.d denied execution of force-reload. invoke-rc.d: policy-rc.d denied execution of force-reload. Removing amanda-common ... Removing bsd-mailx ... Removing exim4-daemon-light ... invoke-rc.d: policy-rc.d denied execution of stop. Removing exim4-base ... invoke-rc.d: policy-rc.d denied execution of stop. Removing cron ... invoke-rc.d: policy-rc.d denied execution of stop. Removing exim4-config ... Removing openbsd-inetd ... invoke-rc.d: policy-rc.d denied execution of stop. Removing update-inetd ... Removing libfile-copy-recursive-perl ... Removing libgnutls26 ... Removing libgcrypt11 ... Removing libglib2.0-0 ... Removing libgpg-error0 ... Removing liblockfile1 ... Removing libpcre3 ... Removing libtasn1-3 ... Removing tcpd ... Removing libwrap0 ... Removing netbase ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m20.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'remove', 'libglib2.0-0', 'liblockfile1', 'tcpd', 'cron', 'perl', 'exim4-base', 'libgpg-error0', 'perl-modules', 'libwrap0', 'netbase', 'libgdbm3', 'amanda-common', 'update-inetd', 'bsd-mailx', 'libpcre3', 'libfile-copy-recursive-perl', 'openbsd-inetd', 'libgcrypt11', 'libdb4.7', 'libgnutls26', 'exim4-config', 'libtasn1-3', 'exim4-daemon-light', 'amanda-server'] 0m20.1s INFO: Running scripts post_remove 0m20.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_remove_exceptions_lenny'] 0m20.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_remove_exceptions_lenny'] 0m20.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_remove_extras'] 0m20.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_remove_extras'] 0m20.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'libglib2.0-0', 'liblockfile1', 'tcpd', 'cron', 'perl', 'exim4-base', 'libgpg-error0', 'perl-modules', 'libwrap0', 'netbase', 'libgdbm3', 'amanda-common', 'update-inetd', 'bsd-mailx', 'libpcre3', 'libfile-copy-recursive-perl', 'openbsd-inetd', 'libgcrypt11', 'libdb4.7', 'libgnutls26', 'exim4-config', 'libtasn1-3', 'exim4-daemon-light'] 0m21.0s DUMP: (Reading database ... 6349 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing liblockfile1 ... Purging configuration files for liblockfile1 ... dpkg: warning: ignoring request to remove tcpd which isn't installed. Removing cron ... Purging configuration files for cron ... dpkg: warning: ignoring request to remove perl which isn't installed. Removing exim4-base ... Purging configuration files for exim4-base ... Removing libgpg-error0 ... Purging configuration files for libgpg-error0 ... Removing perl-modules ... Purging configuration files for perl-modules ... Removing libwrap0 ... Purging configuration files for libwrap0 ... Removing netbase ... Purging configuration files for netbase ... Removing libgdbm3 ... Purging configuration files for libgdbm3 ... Removing amanda-common ... Purging configuration files for amanda-common ... Removing update-inetd ... Purging configuration files for update-inetd ... Removing bsd-mailx ... Purging configuration files for bsd-mailx ... Removing libpcre3 ... Purging configuration files for libpcre3 ... dpkg: warning: ignoring request to remove libfile-copy-recursive-perl which isn't installed. Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Removing libgcrypt11 ... Purging configuration files for libgcrypt11 ... dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgnutls26 ... Purging configuration files for libgnutls26 ... Removing exim4-config ... Purging configuration files for exim4-config ... dpkg-statoverride: warning: No override present. Removing libtasn1-3 ... Purging configuration files for libtasn1-3 ... Removing exim4-daemon-light ... Purging configuration files for exim4-daemon-light ... 0m21.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'libglib2.0-0', 'liblockfile1', 'tcpd', 'cron', 'perl', 'exim4-base', 'libgpg-error0', 'perl-modules', 'libwrap0', 'netbase', 'libgdbm3', 'amanda-common', 'update-inetd', 'bsd-mailx', 'libpcre3', 'libfile-copy-recursive-perl', 'openbsd-inetd', 'libgcrypt11', 'libdb4.7', 'libgnutls26', 'exim4-config', 'libtasn1-3', 'exim4-daemon-light'] 0m21.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'amanda-server'] 0m21.0s DUMP: (Reading database ... 6263 files and directories currently installed.) Removing amanda-server ... Purging configuration files for amanda-server ... 0m21.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', 'amanda-server'] 0m21.0s INFO: Running scripts post_purge 0m21.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_purge_exceptions'] 0m21.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'tmp/scripts/post_purge_exceptions'] 0m21.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', '--pending'] 0m21.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--purge', '--pending'] 0m21.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--remove', '--pending'] 0m21.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg', '--remove', '--pending'] 0m21.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m21.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m22.1s DEBUG: No broken symlinks as far as we can find. 0m22.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-divert', '--list'] 0m22.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m22.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'dpkg-divert', '--list'] 0m22.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m22.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'apt-get', 'clean'] 0m23.1s DEBUG: File was renamed: /etc/rc6.d/K01sendsigs => /etc/rc6.d/K02sendsigs 0m23.1s DEBUG: File was renamed: /etc/rcS.d/S11mountnfs.sh => /etc/rcS.d/S12mountnfs.sh 0m23.1s DEBUG: File was renamed: /etc/rc0.d/K04umountroot => /etc/rc0.d/K06umountroot 0m23.1s DEBUG: File was renamed: /etc/rcS.d/S14stop-bootlogd-single => /etc/rcS.d/S15stop-bootlogd-single 0m23.1s DEBUG: File was renamed: /etc/rcS.d/S12mountnfs-bootclean.sh => /etc/rcS.d/S13mountnfs-bootclean.sh 0m23.1s DEBUG: File was renamed: /etc/rc0.d/K05halt => /etc/rc0.d/K07halt 0m23.1s DEBUG: File was renamed: /etc/rc0.d/K01sendsigs => /etc/rc0.d/K02sendsigs 0m23.1s DEBUG: File was renamed: /etc/rc0.d/K03umountfs => /etc/rc0.d/K05umountfs 0m23.1s DEBUG: File was renamed: /etc/rcS.d/S13bootmisc.sh => /etc/rcS.d/S14bootmisc.sh 0m23.1s DEBUG: File was renamed: /etc/rc6.d/K03umountfs => /etc/rc6.d/K05umountfs 0m23.1s DEBUG: File was renamed: /etc/rc6.d/K05reboot => /etc/rc6.d/K07reboot 0m23.1s DEBUG: File was renamed: /etc/rc6.d/K02umountnfs.sh => /etc/rc6.d/K03umountnfs.sh 0m23.1s DEBUG: File was renamed: /etc/rc6.d/K04umountroot => /etc/rc6.d/K06umountroot 0m23.1s DEBUG: File was renamed: /etc/rc0.d/K02umountnfs.sh => /etc/rc0.d/K03umountnfs.sh 0m23.2s INFO: PASS: Installation and purging test. 0m23.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'umount', '/proc'] 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp2fsbLc', 'umount', '/proc'] 0m23.5s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m23.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp2fsbLc'] 0m23.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp2fsbLc 0m23.5s INFO: PASS: All tests. 0m23.5s INFO: piuparts run ends. ret=0 End: 2014-02-20 15:13:22 UTC