Start: 2014-11-02 17:06:43 UTC Package: cabal-install Priority: extra Section: haskell Installed-Size: 6908 Maintainer: Debian Haskell Group Architecture: amd64 Source: haskell-cabal-install Version: 0.8.0-1 Depends: libc6 (>= 2.3.3), libffi5 (>= 3.0.4), libgmp3c2, zlib1g (>= 1:1.1.4) Recommends: ghc6 Filename: pool/main/h/haskell-cabal-install/cabal-install_0.8.0-1_amd64.deb Size: 1492206 MD5sum: fe52079f2293af95357ddca3af9fd0c1 SHA1: c806b0e85acdcad380c748ccbd7ff8b15bb3edb3 SHA256: 3037188a032a830396744e0392ab0354278548a9583e8c895da4a391ffdde6c0 Description: command-line interface for Cabal and Hackage The 'cabal' command-line program simplifies the process of managing Haskell software by automating the fetching, configuration, compilation and installation of Haskell libraries and programs. Homepage: http://www.haskell.org/cabal/ Tag: devel::buildtools, devel::lang:haskell, implemented-in::haskell, interface::commandline, role::program, scope::utility, works-with::software:package, works-with::software:source Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt cabal-install=0.8.0-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.61~201410311243~0.59-25-gb896a6f starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt cabal-install=0.8.0-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpfQsFpJ 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpfQsFpJ 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'update'] 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpfQsFpJ/tmp/scripts/ 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpfQsFpJ/tmp/scripts/ 0m1.8s INFO: Running scripts post_chroot_unpack 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (17.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--get-selections', '*'] 0m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--get-selections', '*'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-divert', '--list'] 0m3.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-divert', '--list'] 0m3.5s INFO: apt-cache does not know about any of the requested packages 0m3.5s INFO: Running scripts pre_test 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_test_root_password'] 0m3.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_test_root_password'] 0m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m4.6s DEBUG: No broken symlinks as far as we can find. 0m4.6s INFO: Running scripts pre_install 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'show', 'cabal-install=0.8.0-1'] 0m4.6s DUMP: Package: cabal-install Priority: extra Section: haskell Installed-Size: 6908 Maintainer: Debian Haskell Group Architecture: amd64 Source: haskell-cabal-install Version: 0.8.0-1 Depends: libc6 (>= 2.3.3), libffi5 (>= 3.0.4), libgmp3c2, zlib1g (>= 1:1.1.4) Recommends: ghc6 Filename: pool/main/h/haskell-cabal-install/cabal-install_0.8.0-1_amd64.deb Size: 1492206 MD5sum: fe52079f2293af95357ddca3af9fd0c1 SHA1: c806b0e85acdcad380c748ccbd7ff8b15bb3edb3 SHA256: 3037188a032a830396744e0392ab0354278548a9583e8c895da4a391ffdde6c0 Description: command-line interface for Cabal and Hackage The 'cabal' command-line program simplifies the process of managing Haskell software by automating the fetching, configuration, compilation and installation of Haskell libraries and programs. Homepage: http://www.haskell.org/cabal/ Tag: devel::buildtools, devel::lang:haskell, implemented-in::haskell, interface::commandline, role::program, scope::utility, works-with::software:package, works-with::software:source 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'show', 'cabal-install=0.8.0-1'] 0m4.6s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3.3), libffi5 (>= 3.0.4), libgmp3c2, zlib1g (>= 1:1.1.4) 0m4.6s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpdkJL43/piuparts-depends-dummy'] 0m4.7s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpdkJL43/piuparts-depends-dummy.deb'. 0m4.7s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpdkJL43/piuparts-depends-dummy'] 0m4.7s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpdkJL43/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpfQsFpJ/tmp 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libffi5 (>= 3.0.4); however: Package libffi5 is not installed. piuparts-depends-dummy depends on libgmp3c2; however: Package libgmp3c2 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-yf', 'install'] 0m5.4s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libffi5 libgmp3c2 The following NEW packages will be installed: libffi5 libgmp3c2 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 333 kB of archives. After this operation, 766 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libffi5 amd64 3.0.9-3 [20.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libgmp3c2 amd64 2:4.3.2+dfsg-1 [313 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 333 kB in 0s (4392 kB/s) Selecting previously deselected package libffi5. (Reading database ... 6261 files and directories currently installed.) Unpacking libffi5 (from .../libffi5_3.0.9-3_amd64.deb) ... Selecting previously deselected package libgmp3c2. Unpacking libgmp3c2 (from .../libgmp3c2_2%3a4.3.2+dfsg-1_amd64.deb) ... Setting up libffi5 (3.0.9-3) ... Setting up libgmp3c2 (2:4.3.2+dfsg-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-yf', 'install'] 0m5.4s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.4s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpfQsFpJ/tmp/piuparts-depends-dummy.deb 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DUMP: piuparts-depends-dummy install ok installed 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DUMP: (Reading database ... 6275 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m5.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m6.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m6.9s DEBUG: No broken symlinks as far as we can find. 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'policy'] 0m7.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'policy'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'policy', 'cabal-install'] 0m7.0s DUMP: cabal-install: Installed: (none) Candidate: 0.8.0-1 Version table: 0.8.0-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-cache', 'policy', 'cabal-install'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-y', 'install', 'cabal-install=0.8.0-1'] 0m7.7s DUMP: Reading package lists... Building dependency tree... Reading state information... Recommended packages: ghc6 The following NEW packages will be installed: cabal-install 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1492 kB of archives. After this operation, 7074 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main cabal-install amd64 0.8.0-1 [1492 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1492 kB in 0s (21.5 MB/s) Selecting previously deselected package cabal-install. (Reading database ... 6275 files and directories currently installed.) Unpacking cabal-install (from .../cabal-install_0.8.0-1_amd64.deb) ... Setting up cabal-install (0.8.0-1) ... 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', '-y', 'install', 'cabal-install=0.8.0-1'] 0m7.7s INFO: Running scripts post_install 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_install_exceptions'] 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_install_exceptions'] 0m7.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m7.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m8.6s DEBUG: No broken symlinks as far as we can find. 0m8.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--get-selections', '*'] 0m8.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install cabal-install install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libffi5 install libgcc1 install libgmp3c2 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m8.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--get-selections', '*'] 0m9.2s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', '-ac'] 0m9.8s DUMP: debsums: no md5sums for mawk 0m9.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', '-ac'] 0m9.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.8s DUMP: 0.12~bpo70+1 0m9.8s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.8s INFO: Running adequate version 0.12~bpo70+1 now. 0m9.8s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'cabal-install'] 0m9.9s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'cabal-install'] 0m9.9s INFO: Running scripts pre_remove 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_exceptions'] 0m10.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/pre_remove_exceptions'] 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'remove', 'libffi5', 'libgmp3c2', 'cabal-install'] 0m10.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: cabal-install libffi5 libgmp3c2 0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded. After this operation, 7840 kB disk space will be freed. (Reading database ... 6281 files and directories currently installed.) Removing cabal-install ... Removing libffi5 ... Removing libgmp3c2 ... 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'remove', 'libffi5', 'libgmp3c2', 'cabal-install'] 0m10.7s INFO: Running scripts post_remove 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_remove_extras'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_remove_extras'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'libffi5', 'libgmp3c2'] 0m10.8s DUMP: (Reading database ... 6262 files and directories currently installed.) Removing libffi5 ... Purging configuration files for libffi5 ... Removing libgmp3c2 ... Purging configuration files for libgmp3c2 ... 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'libffi5', 'libgmp3c2'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'cabal-install'] 0m10.8s DUMP: (Reading database ... 6262 files and directories currently installed.) Removing cabal-install ... Purging configuration files for cabal-install ... 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', 'cabal-install'] 0m10.8s INFO: Running scripts post_purge 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_purge_exceptions'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'tmp/scripts/post_purge_exceptions'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', '--pending'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--purge', '--pending'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--remove', '--pending'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg', '--remove', '--pending'] 0m10.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m11.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m11.8s DEBUG: No broken symlinks as far as we can find. 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-divert', '--list'] 0m11.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'dpkg-divert', '--list'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'apt-get', 'clean'] 0m12.8s INFO: PASS: Installation and purging test. 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'umount', '/proc'] 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ', 'umount', '/proc'] 0m13.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m13.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpfQsFpJ'] 0m13.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpfQsFpJ 0m13.1s INFO: PASS: All tests. 0m13.1s INFO: piuparts run ends. ret=0 End: 2014-11-02 17:06:56 UTC