Start: 2014-02-06 16:34:14 UTC Package: ecs Priority: optional Section: science Installed-Size: 616 Maintainer: Debian Science Team Architecture: amd64 Version: 2.0.0.rc1-3 Depends: libbft1, libc6 (>= 2.3), libcgns2, libhdf5-openmpi-1.8.4, zlib1g (>= 1:1.1.4) Recommends: code-saturne Filename: pool/main/e/ecs/ecs_2.0.0.rc1-3_amd64.deb Size: 258150 MD5sum: a10c22728527ecc0d5bf4945e3f20f26 SHA1: 452d54c627c918017bde99666ce9c760d7a92a12 SHA256: 44c32e8207667cefe28bcb7d29130866508d23ecb3aa0b95a8cfc68f3cddf8da Description: Code_Saturne Preprocessor The basic capabilities of Code_Saturne enable the handling of either incompressible or expandable flows with or without heat transfer and turbulence. Dedicated modules are available for specific physics such as radiative heat transfer, combustion (gas, coal, heavy fuel oil, ...), magneto-hydrodynamics, compressible flows, two-phase flows (Euler-Lagrange approach with two-way coupling), extensions to specific applications (e.g. Mercure_Saturne for atmospheric environment). . It runs in parallel with MPI on distributed memory machines. Developed since 1997 at EDF R&D, it is based on a co-located Finite Volume approach that accepts meshes with any type of cell (tetrahedral, hexahedral, prismatic, pyramidal, polyhedral...) and any type of grid structure (unstructured, block structured, hybrid, conforming or with hanging nodes, ...). . ECS means "Enveloppe Code Saturne". This package is the Pre-processing module of Code_Saturne (a computational fluid dynamics free software). Homepage: http://www.code-saturne.org/ Tag: qa::low-popcon Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt ecs=2.0.0.rc1-3 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57~201402051027~0.56-30-g8a43058 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt ecs=2.0.0.rc1-3 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpbjh_TW 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpbjh_TW 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.9s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.9s DEBUG: Created policy-rc.d and chmodded it. 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpbjh_TW/tmp/scripts/ 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpbjh_TW/tmp/scripts/ 0m2.3s INFO: Running scripts post_setup 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (24.3 MB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg-divert', '--list'] 0m3.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg-divert', '--list'] 0m3.7s INFO: apt-cache does not know about any of the requested packages 0m3.7s INFO: Running scripts pre_test 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_test_root_password'] 0m3.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_test_root_password'] 0m3.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m4.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m4.7s DEBUG: No broken symlinks as far as we can find. 0m4.7s INFO: Running scripts pre_install 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'show', 'ecs=2.0.0.rc1-3'] 0m4.8s DUMP: Package: ecs Priority: optional Section: science Installed-Size: 616 Maintainer: Debian Science Team Architecture: amd64 Version: 2.0.0.rc1-3 Depends: libbft1, libc6 (>= 2.3), libcgns2, libhdf5-openmpi-1.8.4, zlib1g (>= 1:1.1.4) Recommends: code-saturne Filename: pool/main/e/ecs/ecs_2.0.0.rc1-3_amd64.deb Size: 258150 MD5sum: a10c22728527ecc0d5bf4945e3f20f26 SHA1: 452d54c627c918017bde99666ce9c760d7a92a12 SHA256: 44c32e8207667cefe28bcb7d29130866508d23ecb3aa0b95a8cfc68f3cddf8da Description: Code_Saturne Preprocessor The basic capabilities of Code_Saturne enable the handling of either incompressible or expandable flows with or without heat transfer and turbulence. Dedicated modules are available for specific physics such as radiative heat transfer, combustion (gas, coal, heavy fuel oil, ...), magneto-hydrodynamics, compressible flows, two-phase flows (Euler-Lagrange approach with two-way coupling), extensions to specific applications (e.g. Mercure_Saturne for atmospheric environment). . It runs in parallel with MPI on distributed memory machines. Developed since 1997 at EDF R&D, it is based on a co-located Finite Volume approach that accepts meshes with any type of cell (tetrahedral, hexahedral, prismatic, pyramidal, polyhedral...) and any type of grid structure (unstructured, block structured, hybrid, conforming or with hanging nodes, ...). . ECS means "Enveloppe Code Saturne". This package is the Pre-processing module of Code_Saturne (a computational fluid dynamics free software). Homepage: http://www.code-saturne.org/ Tag: qa::low-popcon 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'show', 'ecs=2.0.0.rc1-3'] 0m4.8s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libbft1, libc6 (>= 2.3), libcgns2, libhdf5-openmpi-1.8.4, zlib1g (>= 1:1.1.4) 0m4.8s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpH0tqI0/piuparts-depends-dummy'] 0m4.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpH0tqI0/piuparts-depends-dummy.deb'. 0m4.9s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpH0tqI0/piuparts-depends-dummy'] 0m4.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpH0tqI0/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpbjh_TW/tmp 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libbft1; however: Package libbft1 is not installed. piuparts-depends-dummy depends on libcgns2; however: Package libcgns2 is not installed. piuparts-depends-dummy depends on libhdf5-openmpi-1.8.4; however: Package libhdf5-openmpi-1.8.4 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-yf', 'install'] 0m6.1s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libbft1 libcgns2 libgfortran3 libhdf5-openmpi-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libtorque2 The following NEW packages will be installed: libbft1 libcgns2 libgfortran3 libhdf5-openmpi-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libtorque2 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 3443 kB of archives. After this operation, 10.9 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libbft1 amd64 1.1.2-5 [22.4 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libgfortran3 amd64 4.4.5-8 [291 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libibverbs1 amd64 1.1.3-2 [33.7 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libnuma1 amd64 2.0.5-1 [26.7 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libtorque2 amd64 2.4.8+dfsg-9squeeze2 [115 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libopenmpi1.3 amd64 1.4.2-4 [1400 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libhdf5-openmpi-1.8.4 amd64 1.8.4-patch1-2 [1357 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main libcgns2 amd64 2.5.4-3 [197 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3443 kB in 0s (21.0 MB/s) Selecting previously deselected package libbft1. (Reading database ... 6278 files and directories currently installed.) Unpacking libbft1 (from .../libbft1_1.1.2-5_amd64.deb) ... Selecting previously deselected package libgfortran3. Unpacking libgfortran3 (from .../libgfortran3_4.4.5-8_amd64.deb) ... Selecting previously deselected package libibverbs1. Unpacking libibverbs1 (from .../libibverbs1_1.1.3-2_amd64.deb) ... Selecting previously deselected package libnuma1. Unpacking libnuma1 (from .../libnuma1_2.0.5-1_amd64.deb) ... Selecting previously deselected package libtorque2. Unpacking libtorque2 (from .../libtorque2_2.4.8+dfsg-9squeeze2_amd64.deb) ... Selecting previously deselected package libopenmpi1.3. Unpacking libopenmpi1.3 (from .../libopenmpi1.3_1.4.2-4_amd64.deb) ... Selecting previously deselected package libhdf5-openmpi-1.8.4. Unpacking libhdf5-openmpi-1.8.4 (from .../libhdf5-openmpi-1.8.4_1.8.4-patch1-2_amd64.deb) ... Selecting previously deselected package libcgns2. Unpacking libcgns2 (from .../libcgns2_2.5.4-3_amd64.deb) ... Setting up libbft1 (1.1.2-5) ... Setting up libgfortran3 (4.4.5-8) ... Setting up libibverbs1 (1.1.3-2) ... Setting up libnuma1 (2.0.5-1) ... Setting up libtorque2 (2.4.8+dfsg-9squeeze2) ... Setting up libopenmpi1.3 (1.4.2-4) ... Setting up libhdf5-openmpi-1.8.4 (1.8.4-patch1-2) ... Setting up libcgns2 (2.5.4-3) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-yf', 'install'] 0m6.1s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m6.1s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpbjh_TW/tmp/piuparts-depends-dummy.deb 0m6.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.2s DUMP: (Reading database ... 6435 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m6.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m6.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m6.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m6.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m7.6s DEBUG: No broken symlinks as far as we can find. 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'policy'] 0m7.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'policy'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'policy', 'ecs'] 0m7.7s DUMP: ecs: Installed: (none) Candidate: 2.0.0.rc1-3 Version table: 2.0.0.rc1-3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-cache', 'policy', 'ecs'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-y', 'install', 'ecs=2.0.0.rc1-3'] 0m8.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Recommended packages: code-saturne The following NEW packages will be installed: ecs 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 258 kB of archives. After this operation, 631 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main ecs amd64 2.0.0.rc1-3 [258 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 258 kB in 0s (3195 kB/s) Selecting previously deselected package ecs. (Reading database ... 6435 files and directories currently installed.) Unpacking ecs (from .../ecs_2.0.0.rc1-3_amd64.deb) ... Setting up ecs (2.0.0.rc1-3) ... 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', '-y', 'install', 'ecs=2.0.0.rc1-3'] 0m8.3s INFO: Running scripts post_install 0m8.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m8.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m9.3s DEBUG: No broken symlinks as far as we can find. 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--get-selections', '*'] 0m9.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install ecs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libbft1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcgns2 install libcomerr2 install libdb4.8 install libgcc1 install libgfortran3 install libhdf5-openmpi-1.8.4 install libibverbs1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libnuma1 install libopenmpi1.3 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libtorque2 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--get-selections', '*'] 0m9.9s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', '-ac'] 0m10.5s DUMP: debsums: no md5sums for mawk 0m10.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', '-ac'] 0m10.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s DUMP: 0.11.3~bpo70+1 0m10.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m10.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'ecs'] 0m10.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'ecs'] 0m10.6s INFO: Running scripts pre_remove 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/pre_remove_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'remove', 'libibverbs1', 'libcgns2', 'libopenmpi1.3', 'libhdf5-openmpi-1.8.4', 'libbft1', 'libgfortran3', 'libnuma1', 'libtorque2', 'ecs'] 0m11.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: ecs libbft1 libcgns2 libgfortran3 libhdf5-openmpi-1.8.4 libibverbs1 libnuma1 libopenmpi1.3 libtorque2 0 upgraded, 0 newly installed, 9 to remove and 0 not upgraded. After this operation, 11.6 MB disk space will be freed. (Reading database ... 6453 files and directories currently installed.) Removing ecs ... Removing libbft1 ... Removing libcgns2 ... Removing libhdf5-openmpi-1.8.4 ... Removing libopenmpi1.3 ... Removing libgfortran3 ... Removing libibverbs1 ... Removing libnuma1 ... Removing libtorque2 ... 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'remove', 'libibverbs1', 'libcgns2', 'libopenmpi1.3', 'libhdf5-openmpi-1.8.4', 'libbft1', 'libgfortran3', 'libnuma1', 'libtorque2', 'ecs'] 0m11.6s INFO: Running scripts post_remove 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'libibverbs1', 'libcgns2', 'libopenmpi1.3', 'libhdf5-openmpi-1.8.4', 'libbft1', 'libgfortran3', 'libnuma1', 'libtorque2'] 0m11.7s DUMP: (Reading database ... 6278 files and directories currently installed.) Removing libibverbs1 ... Purging configuration files for libibverbs1 ... Removing libcgns2 ... Purging configuration files for libcgns2 ... Removing libopenmpi1.3 ... Purging configuration files for libopenmpi1.3 ... Removing libhdf5-openmpi-1.8.4 ... Purging configuration files for libhdf5-openmpi-1.8.4 ... Removing libbft1 ... Purging configuration files for libbft1 ... Removing libgfortran3 ... Purging configuration files for libgfortran3 ... Removing libnuma1 ... Purging configuration files for libnuma1 ... Removing libtorque2 ... Purging configuration files for libtorque2 ... 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'libibverbs1', 'libcgns2', 'libopenmpi1.3', 'libhdf5-openmpi-1.8.4', 'libbft1', 'libgfortran3', 'libnuma1', 'libtorque2'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'ecs'] 0m11.7s DUMP: dpkg: warning: ignoring request to remove ecs which isn't installed. 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', 'ecs'] 0m11.7s INFO: Running scripts post_purge 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_purge_exceptions'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'tmp/scripts/post_purge_exceptions'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', '--pending'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--purge', '--pending'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--remove', '--pending'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg', '--remove', '--pending'] 0m11.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m12.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m12.7s DEBUG: No broken symlinks as far as we can find. 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg-divert', '--list'] 0m12.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'dpkg-divert', '--list'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'apt-get', 'clean'] 0m13.8s INFO: PASS: Installation and purging test. 0m14.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'umount', '/proc'] 0m14.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpbjh_TW', 'umount', '/proc'] 0m14.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m14.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpbjh_TW'] 0m14.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpbjh_TW 0m14.1s INFO: PASS: All tests. 0m14.1s INFO: piuparts run ends. ret=0 End: 2014-02-06 16:34:29 UTC