Start: 2014-02-21 20:02:19 UTC Package: libaxis2c-dev Priority: optional Section: libdevel Installed-Size: 2060 Maintainer: Kyo Lee Original-Maintainer: Soren Hansen , Thierry Carrez Architecture: amd64 Source: axis2c Version: 1.6.0-1 Depends: libaxis2c0 (= 1.6.0-1), libxml2-dev, libapr1-dev Filename: pool/main/a/axis2c/libaxis2c-dev_1.6.0-1_amd64.deb Size: 204194 MD5sum: 1acac1be030745d70a2f4d588f45c64c SHA1: 0c20df603c5f3ebb0589188c548876c925a12648 SHA256: b30749bd7b03541d2437c2b49da1e9116ee6e44df26f2b19af916211600c77f8 Description: Apache web services engine - Development Apache Axis2/C is a Web services engine implemented in the C programming language. It is based on the extensible and flexible Axis2 architecture. Apache Axis2/C can be used to provide and consume WebServices. It has been implemented with portability and ability to embed in mind, hence could be used as a Web services enabler in other software. . Apache Axis2/C supports SOAP 1.1 and SOAP 1.2, as well as REST style of Webservices. A single service could be exposed both as a SOAP style as well as a REST style service simultaneously. It also has built in MTOM support, that can be used to exchange binary data. . Apache Axis2/C is efficient, modular and is designed with extensibility. The extensible design allows it to support the full WS-* stack with the concept of modules. Apache Axis2/C is the Web services engine that supports the most number of WS-* specification implementations in C, with guaranteed interoperability. This enables using C in Service Oriented Architecture (SOA) implementations, and would be very useful when integrating legacy systems into SOA. Homepage: http://ws.apache.org/axis2/c/ Tag: devel::library, role::devel-lib, suite::apache Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libaxis2c-dev=1.6.0-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libaxis2c-dev=1.6.0-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmporLknJ 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmporLknJ 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmporLknJ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmporLknJ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'update'] 0m3.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 0s (9183 kB/s) Reading package lists... 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'update'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-yf', 'dist-upgrade'] 0m4.6s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (41.8 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Feb 21 20:02:23 UTC 2014. Universal Time is now: Fri Feb 21 20:02:23 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-yf', 'dist-upgrade'] 0m4.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmporLknJ/tmp/scripts/ 0m4.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmporLknJ/tmp/scripts/ 0m4.6s INFO: Running scripts post_setup 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_experimental'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_experimental'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_forbid_home'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_forbid_home'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.6s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.5s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (27.4 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--get-selections', '*'] 0m6.0s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--get-selections', '*'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-divert', '--list'] 0m6.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-divert', '--list'] 0m6.0s INFO: apt-cache does not know about any of the requested packages 0m6.0s INFO: Running scripts pre_test 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_test_root_password'] 0m6.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_test_root_password'] 0m6.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m6.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m7.0s DEBUG: No broken symlinks as far as we can find. 0m7.0s INFO: Running scripts pre_install 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_database-server'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_database-server'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_exceptions'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_exceptions'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_extras'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_extras'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'show', 'libaxis2c-dev=1.6.0-1'] 0m7.1s DUMP: Package: libaxis2c-dev Priority: optional Section: libdevel Installed-Size: 2060 Maintainer: Kyo Lee Original-Maintainer: Soren Hansen , Thierry Carrez Architecture: amd64 Source: axis2c Version: 1.6.0-1 Depends: libaxis2c0 (= 1.6.0-1), libxml2-dev, libapr1-dev Filename: pool/main/a/axis2c/libaxis2c-dev_1.6.0-1_amd64.deb Size: 204194 MD5sum: 1acac1be030745d70a2f4d588f45c64c SHA1: 0c20df603c5f3ebb0589188c548876c925a12648 SHA256: b30749bd7b03541d2437c2b49da1e9116ee6e44df26f2b19af916211600c77f8 Description: Apache web services engine - Development Apache Axis2/C is a Web services engine implemented in the C programming language. It is based on the extensible and flexible Axis2 architecture. Apache Axis2/C can be used to provide and consume WebServices. It has been implemented with portability and ability to embed in mind, hence could be used as a Web services enabler in other software. . Apache Axis2/C supports SOAP 1.1 and SOAP 1.2, as well as REST style of Webservices. A single service could be exposed both as a SOAP style as well as a REST style service simultaneously. It also has built in MTOM support, that can be used to exchange binary data. . Apache Axis2/C is efficient, modular and is designed with extensibility. The extensible design allows it to support the full WS-* stack with the concept of modules. Apache Axis2/C is the Web services engine that supports the most number of WS-* specification implementations in C, with guaranteed interoperability. This enables using C in Service Oriented Architecture (SOA) implementations, and would be very useful when integrating legacy systems into SOA. Homepage: http://ws.apache.org/axis2/c/ Tag: devel::library, role::devel-lib, suite::apache 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'show', 'libaxis2c-dev=1.6.0-1'] 0m7.1s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libaxis2c0 (= 1.6.0-1), libxml2-dev, libapr1-dev 0m7.1s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6g2bW0/piuparts-depends-dummy'] 0m7.2s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp6g2bW0/piuparts-depends-dummy.deb'. 0m7.2s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6g2bW0/piuparts-depends-dummy'] 0m7.2s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp6g2bW0/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmporLknJ/tmp 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.2s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libaxis2c0 (= 1.6.0-1); however: Package libaxis2c0 is not installed. piuparts-depends-dummy depends on libxml2-dev; however: Package libxml2-dev is not installed. piuparts-depends-dummy depends on libapr1-dev; however: Package libapr1-dev is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.2s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-yf', 'install'] 0m8.9s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libapr1 libapr1-dev libaxis2c0 libc-dev-bin libc6-dev libssl0.9.8 libxml2 libxml2-dev linux-libc-dev uuid-dev Suggested packages: python glibc-doc Recommended packages: manpages-dev gcc c-compiler xml-core The following NEW packages will be installed: libapr1 libapr1-dev libaxis2c0 libc-dev-bin libc6-dev libssl0.9.8 libxml2 libxml2-dev linux-libc-dev uuid-dev 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 8073 kB of archives. After this operation, 32.7 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libaxis2c0 amd64 1.6.0-1 [511 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libxml2 amd64 2.7.8.dfsg-2+squeeze8 [874 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libxml2-dev amd64 2.7.8.dfsg-2+squeeze8 [833 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libapr1 amd64 1.4.2-6+squeeze4 [94.1 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libc-dev-bin amd64 2.11.3-4 [210 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main linux-libc-dev amd64 2.6.32-48squeeze4 [839 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main libc6-dev amd64 2.11.3-4 [2593 kB] Get:9 http://mirror.bm.debian.org/debian/ squeeze/main uuid-dev amd64 2.17.2-9 [73.8 kB] Get:10 http://mirror.bm.debian.org/debian/ squeeze/main libapr1-dev amd64 1.4.2-6+squeeze4 [1042 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8073 kB in 0s (15.7 MB/s) Selecting previously deselected package libssl0.9.8. (Reading database ... 6258 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Selecting previously deselected package libaxis2c0. Unpacking libaxis2c0 (from .../libaxis2c0_1.6.0-1_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2+squeeze8_amd64.deb) ... Selecting previously deselected package libxml2-dev. Unpacking libxml2-dev (from .../libxml2-dev_2.7.8.dfsg-2+squeeze8_amd64.deb) ... Selecting previously deselected package libapr1. Unpacking libapr1 (from .../libapr1_1.4.2-6+squeeze4_amd64.deb) ... Selecting previously deselected package libc-dev-bin. Unpacking libc-dev-bin (from .../libc-dev-bin_2.11.3-4_amd64.deb) ... Selecting previously deselected package linux-libc-dev. Unpacking linux-libc-dev (from .../linux-libc-dev_2.6.32-48squeeze4_amd64.deb) ... Selecting previously deselected package libc6-dev. Unpacking libc6-dev (from .../libc6-dev_2.11.3-4_amd64.deb) ... Selecting previously deselected package uuid-dev. Unpacking uuid-dev (from .../uuid-dev_2.17.2-9_amd64.deb) ... Selecting previously deselected package libapr1-dev. Unpacking libapr1-dev (from .../libapr1-dev_1.4.2-6+squeeze4_amd64.deb) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libaxis2c0 (1.6.0-1) ... Setting up libxml2 (2.7.8.dfsg-2+squeeze8) ... Setting up libxml2-dev (2.7.8.dfsg-2+squeeze8) ... Setting up libapr1 (1.4.2-6+squeeze4) ... Setting up libc-dev-bin (2.11.3-4) ... Setting up linux-libc-dev (2.6.32-48squeeze4) ... Setting up libc6-dev (2.11.3-4) ... Setting up uuid-dev (2.17.2-9) ... Setting up libapr1-dev (1.4.2-6+squeeze4) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m8.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-yf', 'install'] 0m8.9s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m8.9s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmporLknJ/tmp/piuparts-depends-dummy.deb 0m8.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.0s DUMP: piuparts-depends-dummy install ok installed 0m9.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.0s DUMP: (Reading database ... 7895 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m9.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m9.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m9.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m9.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m10.7s DEBUG: No broken symlinks as far as we can find. 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'policy'] 0m10.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'policy'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'policy', 'libaxis2c-dev'] 0m10.8s DUMP: libaxis2c-dev: Installed: (none) Candidate: 1.6.0-1 Version table: 1.6.0-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-cache', 'policy', 'libaxis2c-dev'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-y', 'install', 'libaxis2c-dev=1.6.0-1'] 0m11.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libaxis2c-dev 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 204 kB of archives. After this operation, 2109 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libaxis2c-dev amd64 1.6.0-1 [204 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 204 kB in 0s (755 kB/s) Selecting previously deselected package libaxis2c-dev. (Reading database ... 7895 files and directories currently installed.) Unpacking libaxis2c-dev (from .../libaxis2c-dev_1.6.0-1_amd64.deb) ... Setting up libaxis2c-dev (1.6.0-1) ... 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', '-y', 'install', 'libaxis2c-dev=1.6.0-1'] 0m11.6s INFO: Running scripts post_install 0m11.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m11.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m12.9s DEBUG: No broken symlinks as far as we can find. 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--get-selections', '*'] 0m12.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libapr1 install libapr1-dev install libattr1 install libaxis2c-dev install libaxis2c0 install libblkid1 install libbz2-1.0 install libc-bin install libc-dev-bin install libc6 install libc6-dev install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install libxml2 install libxml2-dev install linux-libc-dev install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install uuid-dev install xz-utils install zlib1g install 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--get-selections', '*'] 0m13.6s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmporLknJ', '-ac'] 0m14.3s DUMP: debsums: no md5sums for mawk 0m14.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmporLknJ', '-ac'] 0m14.3s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.3s DUMP: 0.11.3~bpo70+1 0m14.3s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.3s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m14.3s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'libaxis2c-dev'] 0m14.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'libaxis2c-dev'] 0m14.5s INFO: Running scripts pre_remove 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_exceptions'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/pre_remove_exceptions'] 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'remove', 'libapr1', 'libxml2', 'libc6-dev', 'uuid-dev', 'libapr1-dev', 'libssl0.9.8', 'libc-dev-bin', 'linux-libc-dev', 'libaxis2c0', 'libxml2-dev', 'libaxis2c-dev'] 0m15.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libapr1 libapr1-dev libaxis2c-dev libaxis2c0 libc-dev-bin libc6-dev libssl0.9.8 libxml2 libxml2-dev linux-libc-dev uuid-dev 0 upgraded, 0 newly installed, 11 to remove and 0 not upgraded. After this operation, 34.8 MB disk space will be freed. (Reading database ... 8427 files and directories currently installed.) Removing libaxis2c-dev ... Removing libapr1-dev ... Removing libapr1 ... Removing libaxis2c0 ... Removing uuid-dev ... Removing libc6-dev ... Removing libc-dev-bin ... Removing libssl0.9.8 ... Removing libxml2-dev ... Removing libxml2 ... Removing linux-libc-dev ... 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'remove', 'libapr1', 'libxml2', 'libc6-dev', 'uuid-dev', 'libapr1-dev', 'libssl0.9.8', 'libc-dev-bin', 'linux-libc-dev', 'libaxis2c0', 'libxml2-dev', 'libaxis2c-dev'] 0m15.3s INFO: Running scripts post_remove 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_remove_extras'] 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_remove_extras'] 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'libapr1', 'libxml2', 'libc6-dev', 'uuid-dev', 'libapr1-dev', 'libssl0.9.8', 'libc-dev-bin', 'linux-libc-dev', 'libaxis2c0', 'libxml2-dev'] 0m15.5s DUMP: (Reading database ... 6259 files and directories currently installed.) Removing libapr1 ... Purging configuration files for libapr1 ... Removing libxml2 ... Purging configuration files for libxml2 ... dpkg: warning: ignoring request to remove libc6-dev which isn't installed. dpkg: warning: ignoring request to remove uuid-dev which isn't installed. dpkg: warning: ignoring request to remove libapr1-dev which isn't installed. Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... dpkg: warning: ignoring request to remove libc-dev-bin which isn't installed. dpkg: warning: ignoring request to remove linux-libc-dev which isn't installed. Removing libaxis2c0 ... Purging configuration files for libaxis2c0 ... dpkg: warning: ignoring request to remove libxml2-dev which isn't installed. 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'libapr1', 'libxml2', 'libc6-dev', 'uuid-dev', 'libapr1-dev', 'libssl0.9.8', 'libc-dev-bin', 'linux-libc-dev', 'libaxis2c0', 'libxml2-dev'] 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'libaxis2c-dev'] 0m15.5s DUMP: dpkg: warning: ignoring request to remove libaxis2c-dev which isn't installed. 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', 'libaxis2c-dev'] 0m15.5s INFO: Running scripts post_purge 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_purge_exceptions'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'tmp/scripts/post_purge_exceptions'] 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', '--pending'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--purge', '--pending'] 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--remove', '--pending'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg', '--remove', '--pending'] 0m15.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m15.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m16.5s DEBUG: No broken symlinks as far as we can find. 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-divert', '--list'] 0m16.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'dpkg-divert', '--list'] 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'apt-get', 'clean'] 0m17.6s INFO: PASS: Installation and purging test. 0m17.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'umount', '/proc'] 0m17.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmporLknJ', 'umount', '/proc'] 0m17.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m17.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmporLknJ'] 0m17.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmporLknJ 0m17.8s INFO: PASS: All tests. 0m17.8s INFO: piuparts run ends. ret=0 End: 2014-02-21 20:02:37 UTC