Start: 2014-01-20 15:56:13 UTC Package: libcrypt-eksblowfish-perl Priority: optional Section: perl Installed-Size: 180 Maintainer: Ivan Kohler Architecture: amd64 Version: 0.008-1 Depends: perl (>= 5.10.1-11), perlapi-5.10.1, libc6 (>= 2.4), libxsloader-perl, libclass-mix-perl Filename: pool/main/libc/libcrypt-eksblowfish-perl/libcrypt-eksblowfish-perl_0.008-1_amd64.deb Size: 53188 MD5sum: 67c4bf3b283d14f7c3d63d295dda49c0 SHA1: bd237b1e3c6bbfb43c723da7c2d49814e534cd38 SHA256: 3c9efab070a651ce6144af7afa1f4a70dee0c4e42949801298dbe5f069e7cee6 Description: Perl module implementing the Eksblowfish block cipher An object of this type encapsulates a keyed instance of the Eksblowfish block cipher, ready to encrypt and decrypt. . Eksblowfish is a variant of the Blowfish cipher, modified to make the key setup very expensive. ("Eks" stands for "expensive key schedule".) This doesn't make it significantly cryptographically stronger, but is intended to hinder brute-force attacks. It also makes it unsuitable for any application requiring key agility. It was designed by Niels Provos and David Mazieres for password hashing in OpenBSD. See Crypt::Eksblowfish::Bcrypt for the hash algorithm. . Eksblowfish is a parameterised (family-keyed) cipher. It takes a cost parameter that controls how expensive the key scheduling is. It also takes a family key, known as the "salt". Cost and salt parameters together define a cipher family. Within each family, a key determines an encryption function in the usual way. See Crypt::Eksblowfish::Family for a way to encapsulate an Eksblowfish cipher family. Tag: implemented-in::perl, role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libcrypt-eksblowfish-perl=0.008-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.56~201312121107~0.55_bpo70+1-96-g4bd17d2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libcrypt-eksblowfish-perl=0.008-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp78hFOa 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp78hFOa 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp78hFOa', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp78hFOa', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.9s DEBUG: Created policy-rc.d and chmodded it. 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-yf', 'dist-upgrade'] 0m2.5s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-yf', 'dist-upgrade'] 0m2.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp78hFOa/tmp/scripts/ 0m2.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp78hFOa/tmp/scripts/ 0m2.5s INFO: Running scripts post_setup 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_experimental'] 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_experimental'] 0m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_forbid_home'] 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_forbid_home'] 0m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (16.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--get-selections', '*'] 0m4.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--get-selections', '*'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg-divert', '--list'] 0m4.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg-divert', '--list'] 0m4.5s INFO: apt-cache does not know about any of the requested packages 0m4.5s INFO: Running scripts pre_test 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_test_root_password'] 0m4.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_test_root_password'] 0m4.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m4.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m5.5s DEBUG: No broken symlinks as far as we can find. 0m5.5s INFO: Running scripts pre_install 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_database-server'] 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_database-server'] 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_exceptions'] 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_exceptions'] 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'show', 'libcrypt-eksblowfish-perl=0.008-1'] 0m5.6s DUMP: Package: libcrypt-eksblowfish-perl Priority: optional Section: perl Installed-Size: 180 Maintainer: Ivan Kohler Architecture: amd64 Version: 0.008-1 Depends: perl (>= 5.10.1-11), perlapi-5.10.1, libc6 (>= 2.4), libxsloader-perl, libclass-mix-perl Filename: pool/main/libc/libcrypt-eksblowfish-perl/libcrypt-eksblowfish-perl_0.008-1_amd64.deb Size: 53188 MD5sum: 67c4bf3b283d14f7c3d63d295dda49c0 SHA1: bd237b1e3c6bbfb43c723da7c2d49814e534cd38 SHA256: 3c9efab070a651ce6144af7afa1f4a70dee0c4e42949801298dbe5f069e7cee6 Description: Perl module implementing the Eksblowfish block cipher An object of this type encapsulates a keyed instance of the Eksblowfish block cipher, ready to encrypt and decrypt. . Eksblowfish is a variant of the Blowfish cipher, modified to make the key setup very expensive. ("Eks" stands for "expensive key schedule".) This doesn't make it significantly cryptographically stronger, but is intended to hinder brute-force attacks. It also makes it unsuitable for any application requiring key agility. It was designed by Niels Provos and David Mazieres for password hashing in OpenBSD. See Crypt::Eksblowfish::Bcrypt for the hash algorithm. . Eksblowfish is a parameterised (family-keyed) cipher. It takes a cost parameter that controls how expensive the key scheduling is. It also takes a family key, known as the "salt". Cost and salt parameters together define a cipher family. Within each family, a key determines an encryption function in the usual way. See Crypt::Eksblowfish::Family for a way to encapsulate an Eksblowfish cipher family. Tag: implemented-in::perl, role::shared-lib 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'show', 'libcrypt-eksblowfish-perl=0.008-1'] 0m5.6s DEBUG: Starting command: ['dpkg-deb', '-b', '--nocheck', '/srv/piuparts.debian.org/tmp/tmph3CatN/piuparts-depends-dummy'] 0m5.7s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmph3CatN/piuparts-depends-dummy.deb'. 0m5.7s DEBUG: Command ok: ['dpkg-deb', '-b', '--nocheck', '/srv/piuparts.debian.org/tmp/tmph3CatN/piuparts-depends-dummy'] 0m5.7s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmph3CatN/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp78hFOa/tmp 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on perl (>= 5.10.1-11); however: Package perl is not installed. piuparts-depends-dummy depends on libclass-mix-perl; however: Package libclass-mix-perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-yf', 'install'] 0m7.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libclass-mix-perl libdb4.7 libgdbm3 perl perl-modules Suggested packages: perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: netbase The following NEW packages will be installed: libclass-mix-perl libdb4.7 libgdbm3 perl perl-modules 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 8661 kB of archives. After this operation, 36.9 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libclass-mix-perl all 0.003-1 [7930 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 8661 kB in 0s (39.1 MB/s) Selecting previously deselected package perl-modules. (Reading database ... 6278 files and directories currently installed.) Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libclass-mix-perl. Unpacking libclass-mix-perl (from .../libclass-mix-perl_0.003-1_all.deb) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libclass-mix-perl (0.003-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-yf', 'install'] 0m7.3s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m7.3s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp78hFOa/tmp/piuparts-depends-dummy.deb 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.3s DUMP: (Reading database ... 7631 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m7.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m8.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m9.1s DEBUG: No broken symlinks as far as we can find. 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'policy'] 0m9.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'policy'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'policy', 'libcrypt-eksblowfish-perl'] 0m9.1s DUMP: libcrypt-eksblowfish-perl: Installed: (none) Candidate: 0.008-1 Version table: 0.008-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-cache', 'policy', 'libcrypt-eksblowfish-perl'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-y', 'install', 'libcrypt-eksblowfish-perl=0.008-1'] 0m9.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libcrypt-eksblowfish-perl 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 53.2 kB of archives. After this operation, 184 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libcrypt-eksblowfish-perl amd64 0.008-1 [53.2 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 53.2 kB in 0s (2507 kB/s) Selecting previously deselected package libcrypt-eksblowfish-perl. (Reading database ... 7631 files and directories currently installed.) Unpacking libcrypt-eksblowfish-perl (from .../libcrypt-eksblowfish-perl_0.008-1_amd64.deb) ... Setting up libcrypt-eksblowfish-perl (0.008-1) ... 0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', '-y', 'install', 'libcrypt-eksblowfish-perl=0.008-1'] 0m9.8s INFO: Running scripts post_install 0m9.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m10.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m10.9s DEBUG: No broken symlinks as far as we can find. 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--get-selections', '*'] 0m11.0s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libclass-mix-perl install libcomerr2 install libcrypt-eksblowfish-perl install libdb4.7 install libdb4.8 install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--get-selections', '*'] 0m11.6s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp78hFOa', '-ac'] 0m12.3s DUMP: debsums: no md5sums for mawk 0m12.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp78hFOa', '-ac'] 0m12.3s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'libcrypt-eksblowfish-perl'] 0m12.4s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'libcrypt-eksblowfish-perl'] 0m12.4s INFO: Running scripts pre_remove 0m12.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_exceptions'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/pre_remove_exceptions'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'remove', 'libclass-mix-perl', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl', 'libcrypt-eksblowfish-perl'] 0m13.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libclass-mix-perl libcrypt-eksblowfish-perl libdb4.7 libgdbm3 perl perl-modules 0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded. After this operation, 37.1 MB disk space will be freed. (Reading database ... 7654 files and directories currently installed.) Removing libcrypt-eksblowfish-perl ... Removing libclass-mix-perl ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'remove', 'libclass-mix-perl', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl', 'libcrypt-eksblowfish-perl'] 0m13.4s INFO: Running scripts post_remove 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'libclass-mix-perl', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl'] 0m13.5s DUMP: dpkg: warning: ignoring request to remove libclass-mix-perl which isn't installed. (Reading database ... 6281 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgdbm3 ... Purging configuration files for libgdbm3 ... dpkg: warning: ignoring request to remove perl which isn't installed. 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'libclass-mix-perl', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'libcrypt-eksblowfish-perl'] 0m13.5s DUMP: dpkg: warning: ignoring request to remove libcrypt-eksblowfish-perl which isn't installed. 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', 'libcrypt-eksblowfish-perl'] 0m13.5s INFO: Running scripts post_purge 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_purge_exceptions'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'tmp/scripts/post_purge_exceptions'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', '--pending'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--purge', '--pending'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--remove', '--pending'] 0m13.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg', '--remove', '--pending'] 0m13.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m13.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m14.6s DEBUG: No broken symlinks as far as we can find. 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg-divert', '--list'] 0m14.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'dpkg-divert', '--list'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'apt-get', 'clean'] 0m15.7s INFO: PASS: Installation and purging test. 0m15.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'umount', '/proc'] 0m15.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp78hFOa', 'umount', '/proc'] 0m15.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m16.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp78hFOa'] 0m16.0s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp78hFOa 0m16.0s INFO: PASS: All tests. 0m16.0s INFO: piuparts run ends. ret=0 End: 2014-01-20 15:56:29 UTC