Start: 2014-08-19 06:39:34 UTC

Package: liblip2
Priority: optional
Section: libs
Installed-Size: 488
Maintainer: Juan Esteban Monsalve Tobon <esteban@v7w.com>
Architecture: amd64
Source: liblip
Version: 2.0.0-1.1
Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1-21), libstdc++6 (>= 4.1.1-21)
Filename: pool/main/libl/liblip/liblip2_2.0.0-1.1_amd64.deb
Size: 302218
MD5sum: 36d730f20700cc10da61cb8ef0fcfaf0
SHA1: 824c0b8cdd36f1ac3b93d2dc3d13de7b0a6ea7a2
SHA256: 3f4e5300a147ecc93413d282f2d764adf230388a1e8f443d2b0ce876665bb8cb
Description: reliable interpolation of multivariate scattered data
 Lip interpolates scattered multivariate data with a Lipschitz function.
 .
 Methods of interpolation of multivariate scattered data are scarce.
 The programming library Lip implements a
 new method by G. Beliakov, which relies on building reliable lower and
 upper approximations of Lipschitz functions. If we assume that the
 function that we want to interpolate is Lipschitz-continuous, we can
 provide tight bounds on its values at any point, in the worse case
 scenario. Thus we obtain the interpolant, which approximates the unknown
 Lipschitz function f  best in the worst case scenario. This translates
 into reliable learning of f, something that other methods cannot do (the
 error of approximation of most other methods can be infinitely large,
 depending on what f generated the data).
 .
 Lipschitz condition implies that the rate of change of the function is
 bounded:
 .
 |f(x)-f(y)|<M||x-y||.
 .
 It is easily interpreted as the largest slope of the function f. f needs
 not be differentiable.
 .
 The interpolant based on the Lipschitz properties of the function is
 piecewise linear, it possesses many useful properties, and it is shown
 that it is the best possible approximation to f in the worst case
 scenario. The value of the interpolant depends on the data points in the
 immediate neigbourhood of the point in question, and in this sense, the
 method is similar to the natural neighbour interpolation.
 .
 There are two methods of construction and evaluation of the interpolant.
 The explicit method processes all data points to find the neighbours of
 the point in question. It does not require any preprocessing, but the
 evaluation of the interpolant has linear complexity O(K) in terms of the
 number of data.
 .
 "Fast" method requires substantial preprocessing in the case of more
 than 3-4 variables, but then it provides O(log K) evaluation time, and
 thus is suitable for very large data sets (K of order of 500000) and
 modest dimension (n=1-4). For larger dimension, explicit method becomes
 practically more efficient. The class library Lip implements both fast
 and explicit methods.
Homepage: http://www.deakin.edu.au/~gleb/lip.html
Tag: role::shared-lib

Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt liblip2=2.0.0-1.1
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong.
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.59 starting up.
0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt liblip2=2.0.0-1.1
0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64
0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp7glpCd
0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp7glpCd
0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp7glpCd', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz']
0m1.8s DUMP: 
  tar: ./proc: time stamp 2014-10-15 13:49:47 is 4950612.61891172 s in the future
0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp7glpCd', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz']
0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'mount', '-t', 'proc', 'proc', '/proc']
0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'mount', '-t', 'proc', 'proc', '/proc']
0m1.8s DEBUG: sources.list:
  deb http://mirror.bm.debian.org/debian/ squeeze main
0m1.8s DEBUG: Created policy-rc.d and chmodded it.
0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'update']
0m1.8s DUMP: 
  Hit http://mirror.bm.debian.org squeeze Release.gpg
  Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en
  Hit http://mirror.bm.debian.org squeeze Release
  Hit http://mirror.bm.debian.org squeeze/main amd64 Packages
  Reading package lists...
0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'update']
0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-yf', 'dist-upgrade']
0m2.2s DUMP: 
  Reading package lists...
  Building dependency tree...
  0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-yf', 'dist-upgrade']
0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp7glpCd/tmp/scripts/
0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp7glpCd/tmp/scripts/
0m2.2s INFO: Running scripts post_setup
0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_experimental']
0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_experimental']
0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_forbid_home']
0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_forbid_home']
0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_force-unsafe-io']
0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_force-unsafe-io']
0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_squeeze-backports']
0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_squeeze-backports']
0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_squeeze-fake-essential']
0m3.0s DUMP: 
  *** Adding fake essential packages ***
  Reading package lists...
  Building dependency tree...
  Suggested packages:
    perl-modules
  The following NEW packages will be installed:
    adduser ucf
  0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
  Need to get 320 kB of archives.
  After this operation, 1532 kB of additional disk space will be used.
  Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB]
  Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 320 kB in 0s (13.7 MB/s)
  Selecting previously deselected package adduser.
  (Reading database ... 6138 files and directories currently installed.)
  Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ...
  Selecting previously deselected package ucf.
  Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ...
  Moving old data out of the way
  Setting up adduser (3.112+nmu2) ...
  Setting up ucf (3.0025+nmu1) ...
0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_setup_squeeze-fake-essential']
0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--get-selections', '*']
0m3.5s DUMP: 
  adduser						install
  apt						install
  base-files					install
  base-passwd					install
  bash						install
  bsdutils					install
  coreutils					install
  dash						install
  debconf						install
  debconf-i18n					install
  debian-archive-keyring				install
  debianutils					install
  diffutils					install
  dpkg						install
  e2fslibs					install
  e2fsprogs					install
  findutils					install
  gcc-4.4-base					install
  gnupg						install
  gpgv						install
  grep						install
  gzip						install
  hostname					install
  initscripts					install
  insserv						install
  libacl1						install
  libattr1					install
  libblkid1					install
  libbz2-1.0					install
  libc-bin					install
  libc6						install
  libcomerr2					install
  libdb4.8					install
  libgcc1						install
  liblocale-gettext-perl				install
  liblzma2					install
  libncurses5					install
  libpam-modules					install
  libpam-runtime					install
  libpam0g					install
  libreadline6					install
  libselinux1					install
  libsepol1					install
  libslang2					install
  libss2						install
  libstdc++6					install
  libtext-charwidth-perl				install
  libtext-iconv-perl				install
  libtext-wrapi18n-perl				install
  libusb-0.1-4					install
  libuuid1					install
  login						install
  lsb-base					install
  mawk						install
  mount						install
  ncurses-base					install
  ncurses-bin					install
  passwd						install
  perl-base					install
  readline-common					install
  sed						install
  sensible-utils					install
  sysv-rc						install
  sysvinit					install
  sysvinit-utils					install
  tar						install
  tzdata						install
  ucf						install
  util-linux					install
  xz-utils					install
  zlib1g						install
0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--get-selections', '*']
0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-divert', '--list']
0m3.6s DUMP: 
  diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash
  local diversion of /bin/sync to /bin/sync.distrib
  diversion of /bin/sh to /bin/sh.distrib by dash
0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-divert', '--list']
0m3.6s INFO: apt-cache does not know about any of the requested packages
0m3.6s INFO: Running scripts pre_test
0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_test_root_password']
0m3.6s DUMP: 
  Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully
0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_test_root_password']
0m3.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m4.6s DEBUG: No broken symlinks as far as we can find.
0m4.6s INFO: Running scripts pre_install
0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_database-server']
0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_database-server']
0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_exceptions']
0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_exceptions']
0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_extras']
0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_extras']
0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_foreign_architecture_i386']
0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_install_foreign_architecture_i386']
0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'show', 'liblip2=2.0.0-1.1']
0m4.7s DUMP: 
  Package: liblip2
  Priority: optional
  Section: libs
  Installed-Size: 488
  Maintainer: Juan Esteban Monsalve Tobon <esteban@v7w.com>
  Architecture: amd64
  Source: liblip
  Version: 2.0.0-1.1
  Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1-21), libstdc++6 (>= 4.1.1-21)
  Filename: pool/main/libl/liblip/liblip2_2.0.0-1.1_amd64.deb
  Size: 302218
  MD5sum: 36d730f20700cc10da61cb8ef0fcfaf0
  SHA1: 824c0b8cdd36f1ac3b93d2dc3d13de7b0a6ea7a2
  SHA256: 3f4e5300a147ecc93413d282f2d764adf230388a1e8f443d2b0ce876665bb8cb
  Description: reliable interpolation of multivariate scattered data
   Lip interpolates scattered multivariate data with a Lipschitz function.
   .
   Methods of interpolation of multivariate scattered data are scarce.
   The programming library Lip implements a
   new method by G. Beliakov, which relies on building reliable lower and
   upper approximations of Lipschitz functions. If we assume that the
   function that we want to interpolate is Lipschitz-continuous, we can
   provide tight bounds on its values at any point, in the worse case
   scenario. Thus we obtain the interpolant, which approximates the unknown
   Lipschitz function f  best in the worst case scenario. This translates
   into reliable learning of f, something that other methods cannot do (the
   error of approximation of most other methods can be infinitely large,
   depending on what f generated the data).
   .
   Lipschitz condition implies that the rate of change of the function is
   bounded:
   .
   |f(x)-f(y)|<M||x-y||.
   .
   It is easily interpreted as the largest slope of the function f. f needs
   not be differentiable.
   .
   The interpolant based on the Lipschitz properties of the function is
   piecewise linear, it possesses many useful properties, and it is shown
   that it is the best possible approximation to f in the worst case
   scenario. The value of the interpolant depends on the data points in the
   immediate neigbourhood of the point in question, and in this sense, the
   method is similar to the natural neighbour interpolation.
   .
   There are two methods of construction and evaluation of the interpolant.
   The explicit method processes all data points to find the neighbours of
   the point in question. It does not require any preprocessing, but the
   evaluation of the interpolant has linear complexity O(K) in terms of the
   number of data.
   .
   "Fast" method requires substantial preprocessing in the case of more
   than 3-4 variables, but then it provides O(log K) evaluation time, and
   thus is suitable for very large data sets (K of order of 500000) and
   modest dimension (n=1-4). For larger dimension, explicit method becomes
   practically more efficient. The class library Lip implements both fast
   and explicit methods.
  Homepage: http://www.deakin.edu.au/~gleb/lip.html
  Tag: role::shared-lib
0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'show', 'liblip2=2.0.0-1.1']
0m4.7s DEBUG: metapackage:
  Package: piuparts-depends-dummy
  Version: 0.invalid.0
  Architecture: all
  Maintainer: piuparts developers team <piuparts-devel@lists.alioth.debian.org>
  Description: Dummy package to satisfy dependencies - created by piuparts
   This package was created automatically by piuparts and can safely be removed
  Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1-21), libstdc++6 (>= 4.1.1-21)
  
0m4.7s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp_euPqN/piuparts-depends-dummy']
0m4.7s DUMP: 
  dpkg-deb: warning: not checking contents of control area
  dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp_euPqN/piuparts-depends-dummy.deb'.
0m4.7s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp_euPqN/piuparts-depends-dummy']
0m4.7s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp_euPqN/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp7glpCd/tmp
0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m4.8s DUMP: 
  Selecting previously deselected package piuparts-depends-dummy.
  (Reading database ... 6261 files and directories currently installed.)
  Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ...
  Setting up piuparts-depends-dummy (0.invalid.0) ...
0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-yf', 'install']
0m5.1s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-yf', 'install']
0m5.1s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok
0m5.1s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp7glpCd/tmp/piuparts-depends-dummy.deb
0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy']
0m5.1s DUMP: 
  piuparts-depends-dummy install ok installed
0m5.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy']
0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m5.2s DUMP: 
  (Reading database ... 6261 files and directories currently installed.)
  Removing piuparts-depends-dummy ...
0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m5.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m5.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m6.7s DEBUG: No broken symlinks as far as we can find.
0m6.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'policy']
0m6.7s DUMP: 
  Package files:
   100 /var/lib/dpkg/status
       release a=now
   500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages
       release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main
       origin mirror.bm.debian.org
  Pinned packages:
0m6.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'policy']
0m6.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'policy', 'liblip2']
0m6.8s DUMP: 
  liblip2:
    Installed: (none)
    Candidate: 2.0.0-1.1
    Version table:
       2.0.0-1.1 0
          500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages
0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-cache', 'policy', 'liblip2']
0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-y', 'install', 'liblip2=2.0.0-1.1']
0m7.3s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following NEW packages will be installed:
    liblip2
  0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
  Need to get 302 kB of archives.
  After this operation, 500 kB of additional disk space will be used.
  Get:1 http://mirror.bm.debian.org/debian/ squeeze/main liblip2 amd64 2.0.0-1.1 [302 kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 302 kB in 0s (2790 kB/s)
  Selecting previously deselected package liblip2.
  (Reading database ... 6261 files and directories currently installed.)
  Unpacking liblip2 (from .../liblip2_2.0.0-1.1_amd64.deb) ...
  Setting up liblip2 (2.0.0-1.1) ...
0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', '-y', 'install', 'liblip2=2.0.0-1.1']
0m7.3s INFO: Running scripts post_install
0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_install_exceptions']
0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_install_exceptions']
0m7.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m7.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m8.3s DEBUG: No broken symlinks as far as we can find.
0m8.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--get-selections', '*']
0m8.4s DUMP: 
  adduser						install
  apt						install
  base-files					install
  base-passwd					install
  bash						install
  bsdutils					install
  coreutils					install
  dash						install
  debconf						install
  debconf-i18n					install
  debian-archive-keyring				install
  debianutils					install
  diffutils					install
  dpkg						install
  e2fslibs					install
  e2fsprogs					install
  findutils					install
  gcc-4.4-base					install
  gnupg						install
  gpgv						install
  grep						install
  gzip						install
  hostname					install
  initscripts					install
  insserv						install
  libacl1						install
  libattr1					install
  libblkid1					install
  libbz2-1.0					install
  libc-bin					install
  libc6						install
  libcomerr2					install
  libdb4.8					install
  libgcc1						install
  liblip2						install
  liblocale-gettext-perl				install
  liblzma2					install
  libncurses5					install
  libpam-modules					install
  libpam-runtime					install
  libpam0g					install
  libreadline6					install
  libselinux1					install
  libsepol1					install
  libslang2					install
  libss2						install
  libstdc++6					install
  libtext-charwidth-perl				install
  libtext-iconv-perl				install
  libtext-wrapi18n-perl				install
  libusb-0.1-4					install
  libuuid1					install
  login						install
  lsb-base					install
  mawk						install
  mount						install
  ncurses-base					install
  ncurses-bin					install
  passwd						install
  perl-base					install
  readline-common					install
  sed						install
  sensible-utils					install
  sysv-rc						install
  sysvinit					install
  sysvinit-utils					install
  tar						install
  tzdata						install
  ucf						install
  util-linux					install
  xz-utils					install
  zlib1g						install
0m8.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--get-selections', '*']
0m8.9s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp7glpCd', '-ac']
0m9.4s DUMP: 
  debsums: no md5sums for mawk
0m9.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp7glpCd', '-ac']
0m9.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate']
0m9.5s DUMP: 
  0.12~bpo70+1
0m9.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate']
0m9.5s INFO: Running adequate version 0.12~bpo70+1 now.
0m9.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'liblip2']
0m9.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'liblip2']
0m9.6s INFO: Running scripts pre_remove
0m9.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_40_find_missing_md5sums']
0m9.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_40_find_missing_md5sums']
0m9.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles']
0m9.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles']
0m9.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_50_find_bad_permissions']
0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_50_find_bad_permissions']
0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_50_find_missing_copyright']
0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_50_find_missing_copyright']
0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_exceptions']
0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/pre_remove_exceptions']
0m9.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'remove', 'liblip2']
0m10.3s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following packages will be REMOVED:
    liblip2
  0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
  After this operation, 500 kB disk space will be freed.
  (Reading database ... 6271 files and directories currently installed.)
  Removing liblip2 ...
0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'remove', 'liblip2']
0m10.3s INFO: Running scripts post_remove
0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_remove_exceptions_lenny']
0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_remove_exceptions_lenny']
0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_remove_extras']
0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_remove_extras']
0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', 'liblip2']
0m10.4s DUMP: 
  dpkg: warning: ignoring request to remove liblip2 which isn't installed.
0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', 'liblip2']
0m10.4s INFO: Running scripts post_purge
0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_purge_exceptions']
0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'tmp/scripts/post_purge_exceptions']
0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', '--pending']
0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--purge', '--pending']
0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--remove', '--pending']
0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg', '--remove', '--pending']
0m10.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m10.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m11.5s DEBUG: No broken symlinks as far as we can find.
0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-divert', '--list']
0m11.6s DUMP: 
  diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash
  local diversion of /bin/sync to /bin/sync.distrib
  diversion of /bin/sh to /bin/sh.distrib by dash
0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'dpkg-divert', '--list']
0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'apt-get', 'clean']
0m12.5s INFO: PASS: Installation and purging test.
0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'umount', '/proc']
0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp7glpCd', 'umount', '/proc']
0m12.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m12.9s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp7glpCd']
0m12.9s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp7glpCd
0m12.9s INFO: PASS: All tests.
0m12.9s INFO: piuparts run ends.

ret=0
End: 2014-08-19 06:39:47 UTC