Start: 2014-08-30 15:03:43 UTC Package: libpam-barada Priority: extra Section: libs Installed-Size: 196 Maintainer: Andrew Pollock Architecture: amd64 Source: barada-pam (0.5-1) Version: 0.5-1+b1 Depends: libboost-filesystem1.42.0 (>= 1.42.0-1), libboost-system1.42.0 (>= 1.42.0-1), libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libpam0g (>= 0.99.7.1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0) Filename: pool/main/b/barada-pam/libpam-barada_0.5-1+b1_amd64.deb Size: 45796 MD5sum: f2c4e9fdb1de2742f9f8838e5d228f27 SHA1: 8db9265597099803e20ff3bccb8c97327d9e6f27 SHA256: 578c2896c5f111c966e3ec2faf8926a1439b1ef5e8ec761933ce58dc18c44934 Description: PAM module to provide two-factor authentication based on HOTP Use HOTP (RFC4226) two-factor authentication with PAM. . In addition to a normal password, users are also assigned a 128 bit key and arbitrary-length PIN number. Every time you'd like to login using a OTP, you calculate a secure hash based on your assigned PIN and an increasing counter, the result of which is a six character one time password. . While this module could be used in conjunction with many different client devices, it was written specifically with Android devices in mind. There is companion software which runs on Android, so that your phone essentially becomes a SecureID token. All you need to do is open up the software, type in your PIN, and you get back a 6-character number that you can use to login to your system. Homepage: http://barada.sourceforge.net/ Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libpam-barada=0.5-1+b1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libpam-barada=0.5-1+b1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpdckbge 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpdckbge 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpdckbge', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 3969963.147359081 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpdckbge', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpdckbge/tmp/scripts/ 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpdckbge/tmp/scripts/ 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (12.5 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--get-selections', '*'] 0m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--get-selections', '*'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-divert', '--list'] 0m3.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-divert', '--list'] 0m3.5s INFO: apt-cache does not know about any of the requested packages 0m3.5s INFO: Running scripts pre_test 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_test_root_password'] 0m3.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_test_root_password'] 0m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m3.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m4.5s DEBUG: No broken symlinks as far as we can find. 0m4.5s INFO: Running scripts pre_install 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'show', 'libpam-barada=0.5-1+b1'] 0m4.6s DUMP: Package: libpam-barada Priority: extra Section: libs Installed-Size: 196 Maintainer: Andrew Pollock Architecture: amd64 Source: barada-pam (0.5-1) Version: 0.5-1+b1 Depends: libboost-filesystem1.42.0 (>= 1.42.0-1), libboost-system1.42.0 (>= 1.42.0-1), libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libpam0g (>= 0.99.7.1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0) Filename: pool/main/b/barada-pam/libpam-barada_0.5-1+b1_amd64.deb Size: 45796 MD5sum: f2c4e9fdb1de2742f9f8838e5d228f27 SHA1: 8db9265597099803e20ff3bccb8c97327d9e6f27 SHA256: 578c2896c5f111c966e3ec2faf8926a1439b1ef5e8ec761933ce58dc18c44934 Description: PAM module to provide two-factor authentication based on HOTP Use HOTP (RFC4226) two-factor authentication with PAM. . In addition to a normal password, users are also assigned a 128 bit key and arbitrary-length PIN number. Every time you'd like to login using a OTP, you calculate a secure hash based on your assigned PIN and an increasing counter, the result of which is a six character one time password. . While this module could be used in conjunction with many different client devices, it was written specifically with Android devices in mind. There is companion software which runs on Android, so that your phone essentially becomes a SecureID token. All you need to do is open up the software, type in your PIN, and you get back a 6-character number that you can use to login to your system. Homepage: http://barada.sourceforge.net/ 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'show', 'libpam-barada=0.5-1+b1'] 0m4.6s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libboost-filesystem1.42.0 (>= 1.42.0-1), libboost-system1.42.0 (>= 1.42.0-1), libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libpam0g (>= 0.99.7.1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0) 0m4.6s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp3b8gOL/piuparts-depends-dummy'] 0m4.6s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp3b8gOL/piuparts-depends-dummy.deb'. 0m4.6s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp3b8gOL/piuparts-depends-dummy'] 0m4.6s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp3b8gOL/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpdckbge/tmp 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libboost-filesystem1.42.0 (>= 1.42.0-1); however: Package libboost-filesystem1.42.0 is not installed. piuparts-depends-dummy depends on libboost-system1.42.0 (>= 1.42.0-1); however: Package libboost-system1.42.0 is not installed. piuparts-depends-dummy depends on libssl0.9.8 (>= 0.9.8m-1); however: Package libssl0.9.8 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-yf', 'install'] 0m5.7s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libboost-filesystem1.42.0 libboost-system1.42.0 libssl0.9.8 The following NEW packages will be installed: libboost-filesystem1.42.0 libboost-system1.42.0 libssl0.9.8 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1086 kB of archives. After this operation, 2765 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libboost-system1.42.0 amd64 1.42.0-4 [30.4 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libboost-filesystem1.42.0 amd64 1.42.0-4 [53.4 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1086 kB in 0s (4922 kB/s) Selecting previously deselected package libboost-system1.42.0. (Reading database ... 6261 files and directories currently installed.) Unpacking libboost-system1.42.0 (from .../libboost-system1.42.0_1.42.0-4_amd64.deb) ... Selecting previously deselected package libboost-filesystem1.42.0. Unpacking libboost-filesystem1.42.0 (from .../libboost-filesystem1.42.0_1.42.0-4_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Setting up libboost-system1.42.0 (1.42.0-4) ... Setting up libboost-filesystem1.42.0 (1.42.0-4) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-yf', 'install'] 0m5.7s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.7s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpdckbge/tmp/piuparts-depends-dummy.deb 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.7s DUMP: piuparts-depends-dummy install ok installed 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DUMP: (Reading database ... 6293 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m6.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m7.2s DEBUG: No broken symlinks as far as we can find. 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'policy'] 0m7.3s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'policy'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'policy', 'libpam-barada'] 0m7.3s DUMP: libpam-barada: Installed: (none) Candidate: 0.5-1+b1 Version table: 0.5-1+b1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-cache', 'policy', 'libpam-barada'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-y', 'install', 'libpam-barada=0.5-1+b1'] 0m7.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libpam-barada 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 45.8 kB of archives. After this operation, 201 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libpam-barada amd64 0.5-1+b1 [45.8 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 45.8 kB in 0s (1082 kB/s) Selecting previously deselected package libpam-barada. (Reading database ... 6293 files and directories currently installed.) Unpacking libpam-barada (from .../libpam-barada_0.5-1+b1_amd64.deb) ... Setting up libpam-barada (0.5-1+b1) ... 0m7.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', '-y', 'install', 'libpam-barada=0.5-1+b1'] 0m7.8s INFO: Running scripts post_install 0m7.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_install_exceptions'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_install_exceptions'] 0m7.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m8.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m8.8s DEBUG: No broken symlinks as far as we can find. 0m8.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--get-selections', '*'] 0m8.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libboost-filesystem1.42.0 install libboost-system1.42.0 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-barada install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m8.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--get-selections', '*'] 0m9.4s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpdckbge', '-ac'] 0m9.9s DUMP: debsums: no md5sums for mawk 0m9.9s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpdckbge', '-ac'] 0m9.9s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.0s DUMP: 0.12~bpo70+1 0m10.0s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.0s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.0s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'libpam-barada'] 0m10.1s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'libpam-barada'] 0m10.1s INFO: Running scripts pre_remove 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_exceptions'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/pre_remove_exceptions'] 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'remove', 'libboost-system1.42.0', 'libssl0.9.8', 'libboost-filesystem1.42.0', 'libpam-barada'] 0m10.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libboost-filesystem1.42.0 libboost-system1.42.0 libpam-barada libssl0.9.8 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 2966 kB disk space will be freed. (Reading database ... 6302 files and directories currently installed.) Removing libpam-barada ... Removing libboost-filesystem1.42.0 ... Removing libboost-system1.42.0 ... Removing libssl0.9.8 ... 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'remove', 'libboost-system1.42.0', 'libssl0.9.8', 'libboost-filesystem1.42.0', 'libpam-barada'] 0m10.8s INFO: Running scripts post_remove 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_remove_extras'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_remove_extras'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'libboost-system1.42.0', 'libssl0.9.8', 'libboost-filesystem1.42.0'] 0m10.9s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libboost-system1.42.0 ... Purging configuration files for libboost-system1.42.0 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libboost-filesystem1.42.0 ... Purging configuration files for libboost-filesystem1.42.0 ... 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'libboost-system1.42.0', 'libssl0.9.8', 'libboost-filesystem1.42.0'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'libpam-barada'] 0m10.9s DUMP: dpkg: warning: ignoring request to remove libpam-barada which isn't installed. 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', 'libpam-barada'] 0m10.9s INFO: Running scripts post_purge 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_purge_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'tmp/scripts/post_purge_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', '--pending'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--purge', '--pending'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--remove', '--pending'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg', '--remove', '--pending'] 0m11.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m11.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m11.9s DEBUG: No broken symlinks as far as we can find. 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-divert', '--list'] 0m12.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'dpkg-divert', '--list'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'apt-get', 'clean'] 0m12.9s INFO: PASS: Installation and purging test. 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'umount', '/proc'] 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpdckbge', 'umount', '/proc'] 0m13.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m13.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpdckbge'] 0m13.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpdckbge 0m13.2s INFO: PASS: All tests. 0m13.2s INFO: piuparts run ends. ret=0 End: 2014-08-30 15:03:56 UTC