Start: 2014-09-16 03:02:36 UTC Package: libparted0debian1 Priority: optional Section: libs Installed-Size: 680 Maintainer: Parted Maintainer Team Architecture: amd64 Source: parted Version: 2.3-5 Replaces: libparted0 (<< 2.2-4), libparted1 (<< 2.2), libparted1.4 (<< 1.4.24-2), libparted2 (<< 2.2) Provides: libparted Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.3), libdevmapper1.02.1 (>= 2:1.02.36), libuuid1 (>= 2.16) Suggests: parted | nparted, libparted0-dev, libparted0-i18n (= 2.3-5) Conflicts: libparted1 (<< 2.2), libparted2 (<< 2.2), parted (<< 1.4.13+14pre1) Filename: pool/main/p/parted/libparted0debian1_2.3-5_amd64.deb Size: 341462 MD5sum: 0b6b2241dac2bd25299f77e576bdc29e SHA1: 950a269e835846a97d2ca46836e53cb70303fffe SHA256: 377a6e9c4b3bdd0b4951d5c7ccc75d3d18aa1f4860ec5113d8bc0716fbe4da92 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Tag: role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libparted0debian1=2.3-5 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libparted0debian1=2.3-5 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpCrUzcy 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpCrUzcy 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 2544430.600375179 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpCrUzcy/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpCrUzcy/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (0 B/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--get-selections', '*'] 0m3.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--get-selections', '*'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-divert', '--list'] 0m3.4s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-divert', '--list'] 0m3.4s INFO: apt-cache does not know about any of the requested packages 0m3.4s INFO: Running scripts pre_test 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_test_root_password'] 0m3.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_test_root_password'] 0m3.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m3.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m4.4s DEBUG: No broken symlinks as far as we can find. 0m4.4s INFO: Running scripts pre_install 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_database-server'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_database-server'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_exceptions'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_exceptions'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_extras'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_extras'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'show', 'libparted0debian1=2.3-5'] 0m4.5s DUMP: Package: libparted0debian1 Priority: optional Section: libs Installed-Size: 680 Maintainer: Parted Maintainer Team Architecture: amd64 Source: parted Version: 2.3-5 Replaces: libparted0 (<< 2.2-4), libparted1 (<< 2.2), libparted1.4 (<< 1.4.24-2), libparted2 (<< 2.2) Provides: libparted Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.3), libdevmapper1.02.1 (>= 2:1.02.36), libuuid1 (>= 2.16) Suggests: parted | nparted, libparted0-dev, libparted0-i18n (= 2.3-5) Conflicts: libparted1 (<< 2.2), libparted2 (<< 2.2), parted (<< 1.4.13+14pre1) Filename: pool/main/p/parted/libparted0debian1_2.3-5_amd64.deb Size: 341462 MD5sum: 0b6b2241dac2bd25299f77e576bdc29e SHA1: 950a269e835846a97d2ca46836e53cb70303fffe SHA256: 377a6e9c4b3bdd0b4951d5c7ccc75d3d18aa1f4860ec5113d8bc0716fbe4da92 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Tag: role::shared-lib 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'show', 'libparted0debian1=2.3-5'] 0m4.5s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.3), libdevmapper1.02.1 (>= 2:1.02.36), libuuid1 (>= 2.16) Conflicts: libparted1 (<< 2.2), libparted2 (<< 2.2), parted (<< 1.4.13+14pre1) 0m4.5s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp5HR6w7/piuparts-depends-dummy'] 0m4.5s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp5HR6w7/piuparts-depends-dummy.deb'. 0m4.5s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp5HR6w7/piuparts-depends-dummy'] 0m4.5s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp5HR6w7/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpCrUzcy/tmp 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.5s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libdevmapper1.02.1 (>= 2:1.02.36); however: Package libdevmapper1.02.1 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-yf', 'install'] 0m5.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: dmsetup libdevmapper1.02.1 libudev0 The following NEW packages will be installed: dmsetup libdevmapper1.02.1 libudev0 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 258 kB of archives. After this operation, 532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libudev0 amd64 164-3 [115 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main dmsetup amd64 2:1.02.48-5 [56.7 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libdevmapper1.02.1 amd64 2:1.02.48-5 [85.4 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 258 kB in 0s (2161 kB/s) Selecting previously deselected package libudev0. (Reading database ... 6261 files and directories currently installed.) Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Selecting previously deselected package dmsetup. Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ... Selecting previously deselected package libdevmapper1.02.1. Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ... Setting up libudev0 (164-3) ... Setting up dmsetup (2:1.02.48-5) ... Setting up libdevmapper1.02.1 (2:1.02.48-5) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-yf', 'install'] 0m5.3s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.3s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpCrUzcy/tmp/piuparts-depends-dummy.deb 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DUMP: piuparts-depends-dummy install ok installed 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DUMP: (Reading database ... 6288 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m5.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m6.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m6.9s DEBUG: No broken symlinks as far as we can find. 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'policy'] 0m7.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'policy'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'policy', 'libparted0debian1'] 0m7.0s DUMP: libparted0debian1: Installed: (none) Candidate: 2.3-5 Version table: 2.3-5 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-cache', 'policy', 'libparted0debian1'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-y', 'install', 'libparted0debian1=2.3-5'] 0m7.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: parted nparted libparted0-dev libparted0-i18n The following NEW packages will be installed: libparted0debian1 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 341 kB of archives. After this operation, 696 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libparted0debian1 amd64 2.3-5 [341 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 341 kB in 0s (4974 kB/s) Selecting previously deselected package libparted0debian1. (Reading database ... 6288 files and directories currently installed.) Unpacking libparted0debian1 (from .../libparted0debian1_2.3-5_amd64.deb) ... Setting up libparted0debian1 (2.3-5) ... 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', '-y', 'install', 'libparted0debian1=2.3-5'] 0m7.5s INFO: Running scripts post_install 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_install_exceptions'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_install_exceptions'] 0m7.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m7.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m8.6s DEBUG: No broken symlinks as far as we can find. 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--get-selections', '*'] 0m8.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dmsetup install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libdevmapper1.02.1 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libparted0debian1 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--get-selections', '*'] 0m9.1s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', '-ac'] 0m9.6s DUMP: debsums: no md5sums for mawk 0m9.6s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', '-ac'] 0m9.6s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.7s DUMP: 0.12~bpo70+1 0m9.7s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.7s INFO: Running adequate version 0.12~bpo70+1 now. 0m9.7s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'libparted0debian1'] 0m9.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'libparted0debian1'] 0m9.8s INFO: Running scripts pre_remove 0m9.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m9.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m9.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m9.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_exceptions'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/pre_remove_exceptions'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'remove', 'dmsetup', 'libudev0', 'libdevmapper1.02.1', 'libparted0debian1'] 0m10.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: dmsetup libdevmapper1.02.1 libparted0debian1 libudev0 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 1229 kB disk space will be freed. (Reading database ... 6295 files and directories currently installed.) Removing libparted0debian1 ... Removing dmsetup ... Removing libdevmapper1.02.1 ... Removing libudev0 ... 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'remove', 'dmsetup', 'libudev0', 'libdevmapper1.02.1', 'libparted0debian1'] 0m10.5s INFO: Running scripts post_remove 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_remove_extras'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_remove_extras'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'dmsetup', 'libudev0', 'libdevmapper1.02.1'] 0m10.5s DUMP: dpkg: warning: ignoring request to remove dmsetup which isn't installed. (Reading database ... 6261 files and directories currently installed.) Removing libudev0 ... Purging configuration files for libudev0 ... Removing libdevmapper1.02.1 ... Purging configuration files for libdevmapper1.02.1 ... 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'dmsetup', 'libudev0', 'libdevmapper1.02.1'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'libparted0debian1'] 0m10.6s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libparted0debian1 ... Purging configuration files for libparted0debian1 ... 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', 'libparted0debian1'] 0m10.6s INFO: Running scripts post_purge 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_purge_exceptions'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'tmp/scripts/post_purge_exceptions'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', '--pending'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--purge', '--pending'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--remove', '--pending'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg', '--remove', '--pending'] 0m10.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m10.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m11.6s DEBUG: No broken symlinks as far as we can find. 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-divert', '--list'] 0m11.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'dpkg-divert', '--list'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'apt-get', 'clean'] 0m12.6s INFO: PASS: Installation and purging test. 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'umount', '/proc'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCrUzcy', 'umount', '/proc'] 0m12.8s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m12.9s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpCrUzcy'] 0m12.9s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpCrUzcy 0m12.9s INFO: PASS: All tests. 0m12.9s INFO: piuparts run ends. ret=0 End: 2014-09-16 03:02:49 UTC