Start: 2014-08-02 04:27:24 UTC Package: libpcp-pmda-perl Priority: optional Section: perl Installed-Size: 126 Maintainer: Nathan Scott Architecture: amd64 Source: pcp Version: 3.3.3-squeeze3 Depends: libc6 (>= 2.4), libpcp-pmda3 (= 3.3.3-squeeze3), libpcp3 (>= 2.7.4-20080507), perl (>= 5.10.1-17squeeze6), perlapi-5.10.1 Filename: pool/main/p/pcp/libpcp-pmda-perl_3.3.3-squeeze3_amd64.deb Size: 41076 MD5sum: da45f9be79bf6a903607bbd617f8c518 SHA1: c757a63dd33ac12319884351182b2bfe0d5201da SHA256: 6af0cdefb49aada213e3d5d9988ec25a1e37e0a92afece0b9abd307db89436b6 Description: Performance Co-Pilot Domain Agent Perl module The PCP::PMDA Perl module contains the language bindings for building Performance Metric Domain Agents (PMDAs) using Perl. Each PMDA exports performance data for one specific domain, for example the operating system kernel, Cisco routers, a database, an application, etc. . The Performance Co-Pilot provides a unifying abstraction for all of the interesting performance data in a system, and allows client applications to easily retrieve and process any subset of that data. Homepage: http://oss.sgi.com/projects/pcp Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libpcp-pmda-perl=3.3.3-squeeze3 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libpcp-pmda-perl=3.3.3-squeeze3 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpCk3UXK 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpCk3UXK 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-09-01 04:24:41 is 2591836.256624142 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'update'] 0m3.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8370 kB] Fetched 8468 kB in 0s (8970 kB/s) Reading package lists... 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'update'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-yf', 'dist-upgrade'] 0m4.6s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files dpkg tzdata 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3117 kB of archives. After this operation, 53.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze10 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main dpkg amd64 1.15.11 [2402 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2014e-0squeeze1 [639 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3117 kB in 0s (44.3 MB/s) (Reading database ... 6135 files and directories currently installed.) Preparing to replace base-files 6.0squeeze9 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace tzdata 2013i-0squeeze1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Aug 2 04:27:29 UTC 2014. Universal Time is now: Sat Aug 2 04:27:29 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-yf', 'dist-upgrade'] 0m4.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpCk3UXK/tmp/scripts/ 0m4.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpCk3UXK/tmp/scripts/ 0m4.6s INFO: Running scripts post_setup 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_experimental'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_experimental'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_forbid_home'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_forbid_home'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.6s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (20.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m6.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--get-selections', '*'] 0m6.1s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--get-selections', '*'] 0m6.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-divert', '--list'] 0m6.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-divert', '--list'] 0m6.1s INFO: apt-cache does not know about any of the requested packages 0m6.1s INFO: Running scripts pre_test 0m6.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_test_root_password'] 0m6.1s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_test_root_password'] 0m6.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m7.2s DEBUG: No broken symlinks as far as we can find. 0m7.2s INFO: Running scripts pre_install 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_database-server'] 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_database-server'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_exceptions'] 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_exceptions'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_extras'] 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_extras'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'show', 'libpcp-pmda-perl=3.3.3-squeeze3'] 0m7.2s DUMP: Package: libpcp-pmda-perl Priority: optional Section: perl Installed-Size: 126 Maintainer: Nathan Scott Architecture: amd64 Source: pcp Version: 3.3.3-squeeze3 Depends: libc6 (>= 2.4), libpcp-pmda3 (= 3.3.3-squeeze3), libpcp3 (>= 2.7.4-20080507), perl (>= 5.10.1-17squeeze6), perlapi-5.10.1 Filename: pool/main/p/pcp/libpcp-pmda-perl_3.3.3-squeeze3_amd64.deb Size: 41076 MD5sum: da45f9be79bf6a903607bbd617f8c518 SHA1: c757a63dd33ac12319884351182b2bfe0d5201da SHA256: 6af0cdefb49aada213e3d5d9988ec25a1e37e0a92afece0b9abd307db89436b6 Description: Performance Co-Pilot Domain Agent Perl module The PCP::PMDA Perl module contains the language bindings for building Performance Metric Domain Agents (PMDAs) using Perl. Each PMDA exports performance data for one specific domain, for example the operating system kernel, Cisco routers, a database, an application, etc. . The Performance Co-Pilot provides a unifying abstraction for all of the interesting performance data in a system, and allows client applications to easily retrieve and process any subset of that data. Homepage: http://oss.sgi.com/projects/pcp 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'show', 'libpcp-pmda-perl=3.3.3-squeeze3'] 0m7.2s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.4), libpcp-pmda3 (= 3.3.3-squeeze3), libpcp3 (>= 2.7.4-20080507), perl (>= 5.10.1-17squeeze6), perlapi-5.10.1 0m7.2s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmppUqiMK/piuparts-depends-dummy'] 0m7.3s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmppUqiMK/piuparts-depends-dummy.deb'. 0m7.3s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmppUqiMK/piuparts-depends-dummy'] 0m7.3s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmppUqiMK/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpCk3UXK/tmp 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.3s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libpcp-pmda3 (= 3.3.3-squeeze3); however: Package libpcp-pmda3 is not installed. piuparts-depends-dummy depends on libpcp3 (>= 2.7.4-20080507); however: Package libpcp3 is not installed. piuparts-depends-dummy depends on perl (>= 5.10.1-17squeeze6); however: Package perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.3s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-yf', 'install'] 0m10.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libdb4.7 libgdbm3 libpcp-pmda3 libpcp3 perl perl-modules Suggested packages: perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: netbase The following NEW packages will be installed: libdb4.7 libgdbm3 libpcp-pmda3 libpcp3 perl perl-modules 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 8823 kB of archives. After this operation, 37.2 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libpcp3 amd64 3.3.3-squeeze3 [144 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libpcp-pmda3 amd64 3.3.3-squeeze3 [26.3 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8823 kB in 2s (3849 kB/s) Selecting previously deselected package libpcp3. (Reading database ... 6261 files and directories currently installed.) Unpacking libpcp3 (from .../libpcp3_3.3.3-squeeze3_amd64.deb) ... Selecting previously deselected package libpcp-pmda3. Unpacking libpcp-pmda3 (from .../libpcp-pmda3_3.3.3-squeeze3_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Setting up libpcp3 (3.3.3-squeeze3) ... Setting up libpcp-pmda3 (3.3.3-squeeze3) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up piuparts-depends-dummy (0.invalid.0) ... 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-yf', 'install'] 0m10.6s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m10.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpCk3UXK/tmp/piuparts-depends-dummy.deb 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m10.7s DUMP: piuparts-depends-dummy install ok installed 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m10.7s DUMP: (Reading database ... 7618 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m11.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m12.7s DEBUG: No broken symlinks as far as we can find. 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'policy'] 0m12.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'policy'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'policy', 'libpcp-pmda-perl'] 0m12.8s DUMP: libpcp-pmda-perl: Installed: (none) Candidate: 3.3.3-squeeze3 Version table: 3.3.3-squeeze3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-cache', 'policy', 'libpcp-pmda-perl'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-y', 'install', 'libpcp-pmda-perl=3.3.3-squeeze3'] 0m13.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libpcp-pmda-perl 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 41.1 kB of archives. After this operation, 129 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libpcp-pmda-perl amd64 3.3.3-squeeze3 [41.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 41.1 kB in 0s (1933 kB/s) Selecting previously deselected package libpcp-pmda-perl. (Reading database ... 7618 files and directories currently installed.) Unpacking libpcp-pmda-perl (from .../libpcp-pmda-perl_3.3.3-squeeze3_amd64.deb) ... Setting up libpcp-pmda-perl (3.3.3-squeeze3) ... 0m13.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', '-y', 'install', 'libpcp-pmda-perl=3.3.3-squeeze3'] 0m13.3s INFO: Running scripts post_install 0m13.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_install_exceptions'] 0m13.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_install_exceptions'] 0m13.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m13.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m14.5s DEBUG: No broken symlinks as far as we can find. 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--get-selections', '*'] 0m14.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.7 install libdb4.8 install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpcp-pmda-perl install libpcp-pmda3 install libpcp3 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--get-selections', '*'] 0m15.2s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', '-ac'] 0m15.9s DUMP: debsums: no md5sums for mawk 0m15.9s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', '-ac'] 0m15.9s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m15.9s DUMP: 0.11.6~bpo70+1 0m15.9s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m15.9s INFO: Running adequate version 0.11.6~bpo70+1 now. 0m15.9s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'libpcp-pmda-perl'] 0m16.0s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'libpcp-pmda-perl'] 0m16.0s INFO: Running scripts pre_remove 0m16.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m16.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m16.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m16.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m16.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m16.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m16.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m16.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m16.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_exceptions'] 0m16.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/pre_remove_exceptions'] 0m16.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'remove', 'perl-modules', 'libpcp-pmda3', 'libpcp3', 'perl', 'libdb4.7', 'libgdbm3', 'libpcp-pmda-perl'] 0m16.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdb4.7 libgdbm3 libpcp-pmda-perl libpcp-pmda3 libpcp3 perl perl-modules 0 upgraded, 0 newly installed, 7 to remove and 0 not upgraded. After this operation, 37.3 MB disk space will be freed. (Reading database ... 7628 files and directories currently installed.) Removing libpcp-pmda-perl ... Removing libpcp-pmda3 ... Removing libpcp3 ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'remove', 'perl-modules', 'libpcp-pmda3', 'libpcp3', 'perl', 'libdb4.7', 'libgdbm3', 'libpcp-pmda-perl'] 0m16.8s INFO: Running scripts post_remove 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_remove_exceptions_lenny'] 0m16.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_remove_exceptions_lenny'] 0m16.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_remove_extras'] 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_remove_extras'] 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'perl-modules', 'libpcp-pmda3', 'libpcp3', 'perl', 'libdb4.7', 'libgdbm3'] 0m16.9s DUMP: (Reading database ... 6265 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... Removing libpcp-pmda3 ... Purging configuration files for libpcp-pmda3 ... Removing libpcp3 ... Purging configuration files for libpcp3 ... dpkg: warning: ignoring request to remove perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgdbm3 ... Purging configuration files for libgdbm3 ... 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'perl-modules', 'libpcp-pmda3', 'libpcp3', 'perl', 'libdb4.7', 'libgdbm3'] 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'libpcp-pmda-perl'] 0m16.9s DUMP: dpkg: warning: ignoring request to remove libpcp-pmda-perl which isn't installed. 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', 'libpcp-pmda-perl'] 0m16.9s INFO: Running scripts post_purge 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_purge_exceptions'] 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'tmp/scripts/post_purge_exceptions'] 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', '--pending'] 0m16.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--purge', '--pending'] 0m16.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--remove', '--pending'] 0m17.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg', '--remove', '--pending'] 0m17.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m17.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m18.0s DEBUG: No broken symlinks as far as we can find. 0m18.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-divert', '--list'] 0m18.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m18.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'dpkg-divert', '--list'] 0m18.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m18.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'apt-get', 'clean'] 0m19.0s INFO: PASS: Installation and purging test. 0m19.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'umount', '/proc'] 0m19.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpCk3UXK', 'umount', '/proc'] 0m19.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m19.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpCk3UXK'] 0m19.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpCk3UXK 0m19.4s INFO: PASS: All tests. 0m19.4s INFO: piuparts run ends. ret=0 End: 2014-08-02 04:27:44 UTC