Start: 2014-02-19 19:44:15 UTC Package: librra0 Priority: optional Section: libs Installed-Size: 200 Maintainer: Jonny Lamb Architecture: amd64 Source: librra Version: 0.14-1 Depends: libc6 (>= 2.3), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.12.0), libhal1 (>= 0.5.8.1), libmimedir0, librapi2, libsynce0 Filename: pool/main/libr/librra/librra0_0.14-1_amd64.deb Size: 69790 MD5sum: c563430fe2698be3821bd63b0c21372b SHA1: 3c43c8f4a7c251100c52d5cfc0fb418433e4067c SHA256: 2b0e436d7592ac66548553da31f5d4a69c8c6d94ad388311d0eae97fc07bc294 Description: Library for synchronisation with Windows Mobile devices rra provides the necessary low level magic to synchronise intelligently with Windows Mobile devices, allowing you to tell what's been created/changed/deleted since the last time the device was contacted. It can convert the internal Windows Mobile formats to standards such as vCard, vEvent or vTodo. . This package contains the librra shared library. Homepage: http://www.synce.org/ Tag: role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt librra0=0.14-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt librra0=0.14-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpmX9Bdx 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpmX9Bdx 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'update'] 0m3.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 0s (8748 kB/s) Reading package lists... 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'update'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-yf', 'dist-upgrade'] 0m5.4s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (37.2 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Feb 19 19:44:21 UTC 2014. Universal Time is now: Wed Feb 19 19:44:21 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-yf', 'dist-upgrade'] 0m5.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpmX9Bdx/tmp/scripts/ 0m5.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpmX9Bdx/tmp/scripts/ 0m5.4s INFO: Running scripts post_setup 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_experimental'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_experimental'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_forbid_home'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_forbid_home'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_force-unsafe-io'] 0m5.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_force-unsafe-io'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_squeeze-backports'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_squeeze-backports'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m6.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (19.4 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--get-selections', '*'] 0m6.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--get-selections', '*'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-divert', '--list'] 0m6.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-divert', '--list'] 0m6.8s INFO: apt-cache does not know about any of the requested packages 0m6.8s INFO: Running scripts pre_test 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_test_root_password'] 0m6.9s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_test_root_password'] 0m6.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m7.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m7.8s DEBUG: No broken symlinks as far as we can find. 0m7.8s INFO: Running scripts pre_install 0m7.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_database-server'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_database-server'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_exceptions'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_exceptions'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_extras'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_extras'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'show', 'librra0=0.14-1'] 0m8.0s DUMP: Package: librra0 Priority: optional Section: libs Installed-Size: 200 Maintainer: Jonny Lamb Architecture: amd64 Source: librra Version: 0.14-1 Depends: libc6 (>= 2.3), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.12.0), libhal1 (>= 0.5.8.1), libmimedir0, librapi2, libsynce0 Filename: pool/main/libr/librra/librra0_0.14-1_amd64.deb Size: 69790 MD5sum: c563430fe2698be3821bd63b0c21372b SHA1: 3c43c8f4a7c251100c52d5cfc0fb418433e4067c SHA256: 2b0e436d7592ac66548553da31f5d4a69c8c6d94ad388311d0eae97fc07bc294 Description: Library for synchronisation with Windows Mobile devices rra provides the necessary low level magic to synchronise intelligently with Windows Mobile devices, allowing you to tell what's been created/changed/deleted since the last time the device was contacted. It can convert the internal Windows Mobile formats to standards such as vCard, vEvent or vTodo. . This package contains the librra shared library. Homepage: http://www.synce.org/ Tag: role::shared-lib 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'show', 'librra0=0.14-1'] 0m8.0s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.12.0), libhal1 (>= 0.5.8.1), libmimedir0, librapi2, libsynce0 0m8.0s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpxtzrq4/piuparts-depends-dummy'] 0m8.0s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpxtzrq4/piuparts-depends-dummy.deb'. 0m8.0s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpxtzrq4/piuparts-depends-dummy'] 0m8.0s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpxtzrq4/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpmX9Bdx/tmp 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m8.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libdbus-1-3 (>= 1.0.2); however: Package libdbus-1-3 is not installed. piuparts-depends-dummy depends on libdbus-glib-1-2 (>= 0.78); however: Package libdbus-glib-1-2 is not installed. piuparts-depends-dummy depends on libglib2.0-0 (>= 2.12.0); however: Package libglib2.0-0 is not installed. piuparts-depends-dummy depends on libhal1 (>= 0.5.8.1); however: Package libhal1 is not installed. piuparts-depends-dummy depends on libmimedir0; however: Package libmimedir0 is not installed. piuparts-depends-dummy depends on librapi2; however: Package librapi2 is not installed. piuparts-depends-dummy depends on libsynce0; however: Package libsynce0 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m8.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-yf', 'install'] 0m9.1s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libmimedir0 libpcre3 librapi2 libsynce0 Recommended packages: dbus libglib2.0-data shared-mime-info The following NEW packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libmimedir0 libpcre3 librapi2 libsynce0 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1886 kB of archives. After this operation, 4243 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libdbus-1-3 amd64 1.2.24-4+squeeze2 [146 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libpcre3 amd64 8.02-1.1 [234 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libglib2.0-0 amd64 2.24.2-1 [1122 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libdbus-glib-1-2 amd64 0.88-2.1+squeeze1 [173 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libhal1 amd64 0.5.14-3 [98.0 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libmimedir0 amd64 0.5.1-3 [15.7 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libsynce0 amd64 0.15-1 [46.5 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main librapi2 amd64 0.15-1 [50.3 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1886 kB in 0s (9615 kB/s) Selecting previously deselected package libdbus-1-3. (Reading database ... 6258 files and directories currently installed.) Unpacking libdbus-1-3 (from .../libdbus-1-3_1.2.24-4+squeeze2_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Selecting previously deselected package libdbus-glib-1-2. Unpacking libdbus-glib-1-2 (from .../libdbus-glib-1-2_0.88-2.1+squeeze1_amd64.deb) ... Selecting previously deselected package libhal1. Unpacking libhal1 (from .../libhal1_0.5.14-3_amd64.deb) ... Selecting previously deselected package libmimedir0. Unpacking libmimedir0 (from .../libmimedir0_0.5.1-3_amd64.deb) ... Selecting previously deselected package libsynce0. Unpacking libsynce0 (from .../libsynce0_0.15-1_amd64.deb) ... Selecting previously deselected package librapi2. Unpacking librapi2 (from .../librapi2_0.15-1_amd64.deb) ... Setting up libdbus-1-3 (1.2.24-4+squeeze2) ... Setting up libpcre3 (8.02-1.1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libdbus-glib-1-2 (0.88-2.1+squeeze1) ... Setting up libhal1 (0.5.14-3) ... Setting up libmimedir0 (0.5.1-3) ... Setting up libsynce0 (0.15-1) ... Setting up librapi2 (0.15-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-yf', 'install'] 0m9.1s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m9.1s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpmX9Bdx/tmp/piuparts-depends-dummy.deb 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.1s DUMP: piuparts-depends-dummy install ok installed 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.1s DUMP: (Reading database ... 6341 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m9.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m9.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m10.7s DEBUG: No broken symlinks as far as we can find. 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'policy'] 0m10.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'policy'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'policy', 'librra0'] 0m10.8s DUMP: librra0: Installed: (none) Candidate: 0.14-1 Version table: 0.14-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-cache', 'policy', 'librra0'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-y', 'install', 'librra0=0.14-1'] 0m11.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: librra0 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 69.8 kB of archives. After this operation, 205 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main librra0 amd64 0.14-1 [69.8 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 69.8 kB in 0s (972 kB/s) Selecting previously deselected package librra0. (Reading database ... 6341 files and directories currently installed.) Unpacking librra0 (from .../librra0_0.14-1_amd64.deb) ... Setting up librra0 (0.14-1) ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', '-y', 'install', 'librra0=0.14-1'] 0m11.4s INFO: Running scripts post_install 0m11.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m12.4s DEBUG: No broken symlinks as far as we can find. 0m12.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--get-selections', '*'] 0m12.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libdbus-1-3 install libdbus-glib-1-2 install libgcc1 install libglib2.0-0 install libhal1 install liblocale-gettext-perl install liblzma2 install libmimedir0 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install librapi2 install libreadline6 install librra0 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libsynce0 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m12.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--get-selections', '*'] 0m13.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', '-ac'] 0m13.5s DUMP: debsums: no md5sums for mawk 0m13.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', '-ac'] 0m13.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.6s DUMP: 0.11.3~bpo70+1 0m13.6s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.6s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m13.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'librra0'] 0m13.7s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'librra0'] 0m13.7s INFO: Running scripts pre_remove 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'remove', 'libglib2.0-0', 'libmimedir0', 'libhal1', 'librapi2', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libsynce0', 'librra0'] 0m14.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libmimedir0 libpcre3 librapi2 librra0 libsynce0 0 upgraded, 0 newly installed, 9 to remove and 0 not upgraded. After this operation, 4448 kB disk space will be freed. (Reading database ... 6347 files and directories currently installed.) Removing librra0 ... Removing librapi2 ... Removing libsynce0 ... Removing libhal1 ... Removing libdbus-glib-1-2 ... Removing libdbus-1-3 ... Removing libglib2.0-0 ... Removing libmimedir0 ... Removing libpcre3 ... 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'remove', 'libglib2.0-0', 'libmimedir0', 'libhal1', 'librapi2', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libsynce0', 'librra0'] 0m14.4s INFO: Running scripts post_remove 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_remove_exceptions_lenny'] 0m14.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_remove_exceptions_lenny'] 0m14.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_remove_extras'] 0m14.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_remove_extras'] 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'libglib2.0-0', 'libmimedir0', 'libhal1', 'librapi2', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libsynce0'] 0m14.5s DUMP: (Reading database ... 6259 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libmimedir0 ... Purging configuration files for libmimedir0 ... Removing libhal1 ... Purging configuration files for libhal1 ... Removing librapi2 ... Purging configuration files for librapi2 ... Removing libdbus-1-3 ... Purging configuration files for libdbus-1-3 ... Removing libdbus-glib-1-2 ... Purging configuration files for libdbus-glib-1-2 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libsynce0 ... Purging configuration files for libsynce0 ... 0m14.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'libglib2.0-0', 'libmimedir0', 'libhal1', 'librapi2', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libsynce0'] 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'librra0'] 0m14.6s DUMP: (Reading database ... 6259 files and directories currently installed.) Removing librra0 ... Purging configuration files for librra0 ... 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', 'librra0'] 0m14.6s INFO: Running scripts post_purge 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_purge_exceptions'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'tmp/scripts/post_purge_exceptions'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', '--pending'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--purge', '--pending'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--remove', '--pending'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg', '--remove', '--pending'] 0m14.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m14.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m15.7s DEBUG: No broken symlinks as far as we can find. 0m15.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-divert', '--list'] 0m15.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m15.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'dpkg-divert', '--list'] 0m15.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m15.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'apt-get', 'clean'] 0m16.7s INFO: PASS: Installation and purging test. 0m17.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'umount', '/proc'] 0m17.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx', 'umount', '/proc'] 0m17.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m17.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpmX9Bdx'] 0m17.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpmX9Bdx 0m17.1s INFO: PASS: All tests. 0m17.1s INFO: piuparts run ends. ret=0 End: 2014-02-19 19:44:33 UTC