Start: 2014-02-03 03:12:45 UTC Package: libtest-base-perl Priority: optional Section: perl Installed-Size: 144 Maintainer: Debian Perl Group Architecture: all Version: 0.59-1 Depends: perl, libspiffy-perl (>= 0.30), libalgorithm-diff-perl, libtext-diff-perl Recommends: libtest-deep-perl Filename: pool/main/libt/libtest-base-perl/libtest-base-perl_0.59-1_all.deb Size: 39736 MD5sum: d4920bca1c3d4ffdbb87466b2d73c568 SHA1: f7fafec5b29b09bfeb067d35c848504294ae2a68 SHA256: 514cce7036d5a3ab1fc1e6860ca8e062c9102b69e791d9e67b605cfb5b9e1227 Description: data driven testing framework for Perl Testing is usually the ugly part of Perl module authoring. Perl gives you a standard way to run tests with Test::Harness, and basic testing primitives with Test::More. After that you are pretty much on your own to develop a testing framework and philosophy. Test::More encourages you to make your own framework by subclassing Test::Builder, but that is not trivial. . Test::Base gives you a way to write your own test framework base class that is trivial. In fact it is as simple as two lines: package MyTestFramework; use Test::Base -Base; . A module called MyTestFramework.pm containing those two lines, will give all the power of Test::More and all the power of Test::Base to every test file that uses it. As you build up the capabilities of MyTestFramework, your tests will have all of that power as well. . MyTestFramework becomes a place for you to put all of your reusable testing bits. As you write tests, you will see patterns and duplication, and you can "upstream" them into MyTestFramework. Of course, you don't have to subclass Test::Base at all. You can use it directly in many applications, including everywhere you would use Test::More. . Test::Base concentrates on offering reusable data driven patterns, so that you can write tests with a minimum of code. At the heart of all testing you have inputs, processes and expected outputs. Test::Base provides some clean ways for you to express your input and expected output data, so you can spend your time focusing on that rather than your code scaffolding. Homepage: http://search.cpan.org/dist/Test-Base/ Tag: devel::lang:perl, implemented-in::perl, role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libtest-base-perl=0.59-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57~201401282353~0.56-24-gffe37cd starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libtest-base-perl=0.59-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpT_9CdO 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpT_9CdO 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpT_9CdO/tmp/scripts/ 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpT_9CdO/tmp/scripts/ 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.4s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (1631 kB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m3.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--get-selections', '*'] 0m3.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--get-selections', '*'] 0m3.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg-divert', '--list'] 0m3.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg-divert', '--list'] 0m3.9s INFO: apt-cache does not know about any of the requested packages 0m3.9s INFO: Running scripts pre_test 0m3.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_test_root_password'] 0m3.9s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_test_root_password'] 0m3.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m4.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m4.9s DEBUG: No broken symlinks as far as we can find. 0m4.9s INFO: Running scripts pre_install 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_database-server'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_database-server'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_exceptions'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_exceptions'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'show', 'libtest-base-perl=0.59-1'] 0m4.9s DUMP: Package: libtest-base-perl Priority: optional Section: perl Installed-Size: 144 Maintainer: Debian Perl Group Architecture: all Version: 0.59-1 Depends: perl, libspiffy-perl (>= 0.30), libalgorithm-diff-perl, libtext-diff-perl Recommends: libtest-deep-perl Filename: pool/main/libt/libtest-base-perl/libtest-base-perl_0.59-1_all.deb Size: 39736 MD5sum: d4920bca1c3d4ffdbb87466b2d73c568 SHA1: f7fafec5b29b09bfeb067d35c848504294ae2a68 SHA256: 514cce7036d5a3ab1fc1e6860ca8e062c9102b69e791d9e67b605cfb5b9e1227 Description: data driven testing framework for Perl Testing is usually the ugly part of Perl module authoring. Perl gives you a standard way to run tests with Test::Harness, and basic testing primitives with Test::More. After that you are pretty much on your own to develop a testing framework and philosophy. Test::More encourages you to make your own framework by subclassing Test::Builder, but that is not trivial. . Test::Base gives you a way to write your own test framework base class that is trivial. In fact it is as simple as two lines: package MyTestFramework; use Test::Base -Base; . A module called MyTestFramework.pm containing those two lines, will give all the power of Test::More and all the power of Test::Base to every test file that uses it. As you build up the capabilities of MyTestFramework, your tests will have all of that power as well. . MyTestFramework becomes a place for you to put all of your reusable testing bits. As you write tests, you will see patterns and duplication, and you can "upstream" them into MyTestFramework. Of course, you don't have to subclass Test::Base at all. You can use it directly in many applications, including everywhere you would use Test::More. . Test::Base concentrates on offering reusable data driven patterns, so that you can write tests with a minimum of code. At the heart of all testing you have inputs, processes and expected outputs. Test::Base provides some clean ways for you to express your input and expected output data, so you can spend your time focusing on that rather than your code scaffolding. Homepage: http://search.cpan.org/dist/Test-Base/ Tag: devel::lang:perl, implemented-in::perl, role::shared-lib 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'show', 'libtest-base-perl=0.59-1'] 0m4.9s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: perl, libspiffy-perl (>= 0.30), libalgorithm-diff-perl, libtext-diff-perl 0m4.9s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpRTqTiN/piuparts-depends-dummy'] 0m5.0s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpRTqTiN/piuparts-depends-dummy.deb'. 0m5.0s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpRTqTiN/piuparts-depends-dummy'] 0m5.0s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpRTqTiN/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpT_9CdO/tmp 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on perl; however: Package perl is not installed. piuparts-depends-dummy depends on libspiffy-perl (>= 0.30); however: Package libspiffy-perl is not installed. piuparts-depends-dummy depends on libalgorithm-diff-perl; however: Package libalgorithm-diff-perl is not installed. piuparts-depends-dummy depends on libtext-diff-perl; however: Package libtext-diff-perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-yf', 'install'] 0m9.4s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libalgorithm-diff-perl libdb4.7 libfilter-perl libgdbm3 libspiffy-perl libtext-diff-perl perl perl-modules Suggested packages: libcompress-zlib-perl perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: libalgorithm-diff-xs-perl netbase The following NEW packages will be installed: libalgorithm-diff-perl libdb4.7 libfilter-perl libgdbm3 libspiffy-perl libtext-diff-perl perl perl-modules 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 8831 kB of archives. After this operation, 37.6 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libfilter-perl amd64 1.37-4 [76.4 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libspiffy-perl all 0.30-1 [25.9 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libalgorithm-diff-perl all 1.19.02-2 [51.5 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main libtext-diff-perl all 1.37-1 [24.5 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8831 kB in 2s (3056 kB/s) Selecting previously deselected package perl-modules. (Reading database ... 6278 files and directories currently installed.) Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libfilter-perl. Unpacking libfilter-perl (from .../libfilter-perl_1.37-4_amd64.deb) ... Selecting previously deselected package libspiffy-perl. Unpacking libspiffy-perl (from .../libspiffy-perl_0.30-1_all.deb) ... Selecting previously deselected package libalgorithm-diff-perl. Unpacking libalgorithm-diff-perl (from .../libalgorithm-diff-perl_1.19.02-2_all.deb) ... Selecting previously deselected package libtext-diff-perl. Unpacking libtext-diff-perl (from .../libtext-diff-perl_1.37-1_all.deb) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libfilter-perl (1.37-4) ... Setting up libspiffy-perl (0.30-1) ... Setting up libalgorithm-diff-perl (1.19.02-2) ... Setting up libtext-diff-perl (1.37-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-yf', 'install'] 0m9.4s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m9.4s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpT_9CdO/tmp/piuparts-depends-dummy.deb 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.4s DUMP: (Reading database ... 7712 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m9.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m10.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m11.1s DEBUG: No broken symlinks as far as we can find. 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'policy'] 0m11.1s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'policy'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'policy', 'libtest-base-perl'] 0m11.2s DUMP: libtest-base-perl: Installed: (none) Candidate: 0.59-1 Version table: 0.59-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-cache', 'policy', 'libtest-base-perl'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-y', 'install', 'libtest-base-perl=0.59-1'] 0m11.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Recommended packages: libtest-deep-perl The following NEW packages will be installed: libtest-base-perl 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 39.7 kB of archives. After this operation, 147 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libtest-base-perl all 0.59-1 [39.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 39.7 kB in 0s (586 kB/s) Selecting previously deselected package libtest-base-perl. (Reading database ... 7712 files and directories currently installed.) Unpacking libtest-base-perl (from .../libtest-base-perl_0.59-1_all.deb) ... Setting up libtest-base-perl (0.59-1) ... 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', '-y', 'install', 'libtest-base-perl=0.59-1'] 0m11.8s INFO: Running scripts post_install 0m11.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m12.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m13.0s DEBUG: No broken symlinks as far as we can find. 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--get-selections', '*'] 0m13.0s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libalgorithm-diff-perl install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.7 install libdb4.8 install libfilter-perl install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libspiffy-perl install libss2 install libstdc++6 install libtest-base-perl install libtext-charwidth-perl install libtext-diff-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--get-selections', '*'] 0m13.7s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', '-ac'] 0m14.4s DUMP: debsums: no md5sums for mawk 0m14.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', '-ac'] 0m14.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.4s DUMP: 0.11.3~bpo70+1 0m14.4s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.4s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m14.4s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'libtest-base-perl'] 0m14.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'libtest-base-perl'] 0m14.5s INFO: Running scripts pre_remove 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_exceptions'] 0m14.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/pre_remove_exceptions'] 0m14.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'remove', 'perl-modules', 'libspiffy-perl', 'perl', 'libfilter-perl', 'libdb4.7', 'libgdbm3', 'libtext-diff-perl', 'libalgorithm-diff-perl', 'libtest-base-perl'] 0m15.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libalgorithm-diff-perl libdb4.7 libfilter-perl libgdbm3 libspiffy-perl libtest-base-perl libtext-diff-perl perl perl-modules 0 upgraded, 0 newly installed, 9 to remove and 0 not upgraded. After this operation, 37.7 MB disk space will be freed. (Reading database ... 7726 files and directories currently installed.) Removing libtest-base-perl ... Removing libtext-diff-perl ... Removing libalgorithm-diff-perl ... Removing libspiffy-perl ... Removing libfilter-perl ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'remove', 'perl-modules', 'libspiffy-perl', 'perl', 'libfilter-perl', 'libdb4.7', 'libgdbm3', 'libtext-diff-perl', 'libalgorithm-diff-perl', 'libtest-base-perl'] 0m15.4s INFO: Running scripts post_remove 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'perl-modules', 'libspiffy-perl', 'perl', 'libfilter-perl', 'libdb4.7', 'libgdbm3', 'libtext-diff-perl', 'libalgorithm-diff-perl'] 0m15.5s DUMP: (Reading database ... 6281 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... dpkg: warning: ignoring request to remove libspiffy-perl which isn't installed. dpkg: warning: ignoring request to remove perl which isn't installed. dpkg: warning: ignoring request to remove libfilter-perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgdbm3 ... Purging configuration files for libgdbm3 ... dpkg: warning: ignoring request to remove libtext-diff-perl which isn't installed. dpkg: warning: ignoring request to remove libalgorithm-diff-perl which isn't installed. 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'perl-modules', 'libspiffy-perl', 'perl', 'libfilter-perl', 'libdb4.7', 'libgdbm3', 'libtext-diff-perl', 'libalgorithm-diff-perl'] 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'libtest-base-perl'] 0m15.5s DUMP: dpkg: warning: ignoring request to remove libtest-base-perl which isn't installed. 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', 'libtest-base-perl'] 0m15.5s INFO: Running scripts post_purge 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_purge_exceptions'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'tmp/scripts/post_purge_exceptions'] 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', '--pending'] 0m15.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--purge', '--pending'] 0m15.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--remove', '--pending'] 0m15.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg', '--remove', '--pending'] 0m15.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m15.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m16.6s DEBUG: No broken symlinks as far as we can find. 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg-divert', '--list'] 0m16.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'dpkg-divert', '--list'] 0m16.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m16.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'apt-get', 'clean'] 0m17.6s INFO: PASS: Installation and purging test. 0m17.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'umount', '/proc'] 0m17.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpT_9CdO', 'umount', '/proc'] 0m17.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m17.9s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpT_9CdO'] 0m17.9s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpT_9CdO 0m17.9s INFO: PASS: All tests. 0m17.9s INFO: piuparts run ends. ret=0 End: 2014-02-03 03:13:03 UTC