Start: 2014-11-01 02:30:39 UTC Package: libvisca-dev Priority: extra Section: libdevel Installed-Size: 160 Maintainer: Alan Woodland Architecture: amd64 Source: libvisca Version: 1.0.1-1 Depends: libvisca0 (= 1.0.1-1) Filename: pool/main/libv/libvisca/libvisca-dev_1.0.1-1_amd64.deb Size: 28668 MD5sum: 56ddfe6c4dbb1067a485ef36a403a98f SHA1: 8c0734ccc0c263935377898eddb7da8a73f21c65 SHA256: 008f3cd566e313086c72899dcc4de6ac4f7e48f00ed2bd4fb13d1cc24c644f3c Description: Development files for libvisca VISCA is a protocol used to control many pan and tilt cameras. It is commonly found in cameras used for computer vision or robotics research, as well as video conferencing. . libVISCA is a library for controlling a VISCA(tm) compliant camera through the RS232 port of your PC. VISCA, on its side, is a protocol developed by Sony so that a lot of machine vision cameras from Sony are compliant with VISCA. . Typical cameras include the FCB-IX47 family of camera block for OEMs. Note that other devices, such as VCRs, can be controlled. . This package contains development headers and examples. . Homepage: http://damien.douxchamps.net/libvisca/ Tag: devel::library Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libvisca-dev=1.0.1-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.61~201410311243~0.59-25-gb896a6f starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libvisca-dev=1.0.1-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpVm9pve 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpVm9pve 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpVm9pve', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpVm9pve', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'update'] 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpVm9pve/tmp/scripts/ 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpVm9pve/tmp/scripts/ 0m1.8s INFO: Running scripts post_chroot_unpack 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (19.2 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--get-selections', '*'] 0m3.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--get-selections', '*'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-divert', '--list'] 0m3.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-divert', '--list'] 0m3.6s INFO: apt-cache does not know about any of the requested packages 0m3.6s INFO: Running scripts pre_test 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_test_root_password'] 0m3.6s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_test_root_password'] 0m3.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m3.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m4.6s DEBUG: No broken symlinks as far as we can find. 0m4.6s INFO: Running scripts pre_install 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_extras'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_extras'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'show', 'libvisca-dev=1.0.1-1'] 0m4.8s DUMP: Package: libvisca-dev Priority: extra Section: libdevel Installed-Size: 160 Maintainer: Alan Woodland Architecture: amd64 Source: libvisca Version: 1.0.1-1 Depends: libvisca0 (= 1.0.1-1) Filename: pool/main/libv/libvisca/libvisca-dev_1.0.1-1_amd64.deb Size: 28668 MD5sum: 56ddfe6c4dbb1067a485ef36a403a98f SHA1: 8c0734ccc0c263935377898eddb7da8a73f21c65 SHA256: 008f3cd566e313086c72899dcc4de6ac4f7e48f00ed2bd4fb13d1cc24c644f3c Description: Development files for libvisca VISCA is a protocol used to control many pan and tilt cameras. It is commonly found in cameras used for computer vision or robotics research, as well as video conferencing. . libVISCA is a library for controlling a VISCA(tm) compliant camera through the RS232 port of your PC. VISCA, on its side, is a protocol developed by Sony so that a lot of machine vision cameras from Sony are compliant with VISCA. . Typical cameras include the FCB-IX47 family of camera block for OEMs. Note that other devices, such as VCRs, can be controlled. . This package contains development headers and examples. . Homepage: http://damien.douxchamps.net/libvisca/ Tag: devel::library 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'show', 'libvisca-dev=1.0.1-1'] 0m4.8s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libvisca0 (= 1.0.1-1) 0m4.8s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp2aUoLq/piuparts-depends-dummy'] 0m4.8s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp2aUoLq/piuparts-depends-dummy.deb'. 0m4.8s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp2aUoLq/piuparts-depends-dummy'] 0m4.8s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp2aUoLq/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpVm9pve/tmp 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libvisca0 (= 1.0.1-1); however: Package libvisca0 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-yf', 'install'] 0m5.8s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libvisca0 The following NEW packages will be installed: libvisca0 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 18.8 kB of archives. After this operation, 123 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libvisca0 amd64 1.0.1-1 [18.8 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 18.8 kB in 0s (77.1 kB/s) Selecting previously deselected package libvisca0. (Reading database ... 6261 files and directories currently installed.) Unpacking libvisca0 (from .../libvisca0_1.0.1-1_amd64.deb) ... Setting up libvisca0 (1.0.1-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-yf', 'install'] 0m5.8s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.8s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpVm9pve/tmp/piuparts-depends-dummy.deb 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.8s DUMP: piuparts-depends-dummy install ok installed 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.8s DUMP: (Reading database ... 6269 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m6.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m6.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m7.3s DEBUG: No broken symlinks as far as we can find. 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'policy'] 0m7.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'policy'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'policy', 'libvisca-dev'] 0m7.4s DUMP: libvisca-dev: Installed: (none) Candidate: 1.0.1-1 Version table: 1.0.1-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-cache', 'policy', 'libvisca-dev'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-y', 'install', 'libvisca-dev=1.0.1-1'] 0m8.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libvisca-dev 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 28.7 kB of archives. After this operation, 164 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libvisca-dev amd64 1.0.1-1 [28.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 28.7 kB in 0s (624 kB/s) Selecting previously deselected package libvisca-dev. (Reading database ... 6269 files and directories currently installed.) Unpacking libvisca-dev (from .../libvisca-dev_1.0.1-1_amd64.deb) ... Setting up libvisca-dev (1.0.1-1) ... 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', '-y', 'install', 'libvisca-dev=1.0.1-1'] 0m8.0s INFO: Running scripts post_install 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_install_exceptions'] 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_install_exceptions'] 0m8.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m8.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m9.1s DEBUG: No broken symlinks as far as we can find. 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--get-selections', '*'] 0m9.1s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install libvisca-dev install libvisca0 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--get-selections', '*'] 0m9.6s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpVm9pve', '-ac'] 0m10.1s DUMP: debsums: no md5sums for mawk 0m10.1s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpVm9pve', '-ac'] 0m10.1s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.2s DUMP: 0.12~bpo70+1 0m10.2s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.2s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.2s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'libvisca-dev'] 0m10.3s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'libvisca-dev'] 0m10.3s INFO: Running scripts pre_remove 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_exceptions'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/pre_remove_exceptions'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'remove', 'libvisca0', 'libvisca-dev'] 0m11.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libvisca-dev libvisca0 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 287 kB disk space will be freed. (Reading database ... 6282 files and directories currently installed.) Removing libvisca-dev ... Removing libvisca0 ... 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'remove', 'libvisca0', 'libvisca-dev'] 0m11.0s INFO: Running scripts post_remove 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_remove_extras'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_remove_extras'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'libvisca0'] 0m11.1s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libvisca0 ... Purging configuration files for libvisca0 ... 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'libvisca0'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'libvisca-dev'] 0m11.1s DUMP: dpkg: warning: ignoring request to remove libvisca-dev which isn't installed. 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', 'libvisca-dev'] 0m11.1s INFO: Running scripts post_purge 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_purge_exceptions'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'tmp/scripts/post_purge_exceptions'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', '--pending'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--purge', '--pending'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--remove', '--pending'] 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg', '--remove', '--pending'] 0m11.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m11.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m12.2s DEBUG: No broken symlinks as far as we can find. 0m12.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-divert', '--list'] 0m12.2s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'dpkg-divert', '--list'] 0m12.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m12.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'apt-get', 'clean'] 0m13.2s INFO: PASS: Installation and purging test. 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'umount', '/proc'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpVm9pve', 'umount', '/proc'] 0m13.5s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m13.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpVm9pve'] 0m13.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpVm9pve 0m13.5s INFO: PASS: All tests. 0m13.5s INFO: piuparts run ends. ret=0 End: 2014-11-01 02:30:53 UTC