Start: 2014-07-31 03:20:09 UTC Package: libxcb-shm0 Priority: optional Section: libs Installed-Size: 60 Maintainer: XCB Developers Architecture: amd64 Source: libxcb Version: 1.6-1+squeeze1 Depends: libc6 (>= 2.2.5), libxcb1 Filename: pool/main/libx/libxcb/libxcb-shm0_1.6-1+squeeze1_amd64.deb Size: 9196 MD5sum: 482f076a20e7dbd23dcf71042eaab953 SHA1: fa67233bdeec3bc91cb0a689061f23d723ae97b5 SHA256: 67bd014cca00469df36fbd7299fafaed4a8e8574e15c031f5908996837f533d0 Description: X C Binding, shm extension This package contains the library files needed to run software using libxcb-shm, the shm extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Tag: role::shared-lib Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libxcb-shm0=1.6-1+squeeze1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt libxcb-shm0=1.6-1+squeeze1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmprokbqa 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmprokbqa 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmprokbqa', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-09-01 04:24:41 is 2768671.052363661 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmprokbqa', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'update'] 0m3.4s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8370 kB] Fetched 8468 kB in 0s (9358 kB/s) Reading package lists... 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'update'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files dpkg tzdata 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3117 kB of archives. After this operation, 53.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze10 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main dpkg amd64 1.15.11 [2402 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2014e-0squeeze1 [639 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3117 kB in 0s (42.7 MB/s) (Reading database ... 6135 files and directories currently installed.) Preparing to replace base-files 6.0squeeze9 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace tzdata 2013i-0squeeze1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Jul 31 03:20:14 UTC 2014. Universal Time is now: Thu Jul 31 03:20:14 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmprokbqa/tmp/scripts/ 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmprokbqa/tmp/scripts/ 0m4.4s INFO: Running scripts post_setup 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (29.1 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--get-selections', '*'] 0m5.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--get-selections', '*'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-divert', '--list'] 0m5.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-divert', '--list'] 0m5.8s INFO: apt-cache does not know about any of the requested packages 0m5.8s INFO: Running scripts pre_test 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_test_root_password'] 0m5.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m5.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_test_root_password'] 0m5.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m6.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m6.8s DEBUG: No broken symlinks as far as we can find. 0m6.8s INFO: Running scripts pre_install 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_database-server'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_database-server'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_exceptions'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_exceptions'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_extras'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_extras'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'show', 'libxcb-shm0=1.6-1+squeeze1'] 0m6.9s DUMP: Package: libxcb-shm0 Priority: optional Section: libs Installed-Size: 60 Maintainer: XCB Developers Architecture: amd64 Source: libxcb Version: 1.6-1+squeeze1 Depends: libc6 (>= 2.2.5), libxcb1 Filename: pool/main/libx/libxcb/libxcb-shm0_1.6-1+squeeze1_amd64.deb Size: 9196 MD5sum: 482f076a20e7dbd23dcf71042eaab953 SHA1: fa67233bdeec3bc91cb0a689061f23d723ae97b5 SHA256: 67bd014cca00469df36fbd7299fafaed4a8e8574e15c031f5908996837f533d0 Description: X C Binding, shm extension This package contains the library files needed to run software using libxcb-shm, the shm extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Tag: role::shared-lib 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'show', 'libxcb-shm0=1.6-1+squeeze1'] 0m6.9s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.2.5), libxcb1 0m6.9s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpQsT3e4/piuparts-depends-dummy'] 0m6.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpQsT3e4/piuparts-depends-dummy.deb'. 0m6.9s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpQsT3e4/piuparts-depends-dummy'] 0m6.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpQsT3e4/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmprokbqa/tmp 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libxcb1; however: Package libxcb1 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-yf', 'install'] 0m7.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libxau6 libxcb1 libxdmcp6 The following NEW packages will be installed: libxau6 libxcb1 libxdmcp6 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 80.4 kB of archives. After this operation, 340 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libxau6 amd64 1:1.0.6-1 [16.8 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libxdmcp6 amd64 1:1.0.3-2 [19.3 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libxcb1 amd64 1.6-1+squeeze1 [44.3 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 80.4 kB in 0s (1646 kB/s) Selecting previously deselected package libxau6. (Reading database ... 6261 files and directories currently installed.) Unpacking libxau6 (from .../libxau6_1%3a1.0.6-1_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.3-2_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.6-1+squeeze1_amd64.deb) ... Setting up libxau6 (1:1.0.6-1) ... Setting up libxdmcp6 (1:1.0.3-2) ... Setting up libxcb1 (1.6-1+squeeze1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-yf', 'install'] 0m7.6s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m7.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmprokbqa/tmp/piuparts-depends-dummy.deb 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.7s DUMP: piuparts-depends-dummy install ok installed 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.7s DUMP: (Reading database ... 6278 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m8.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m8.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m9.2s DEBUG: No broken symlinks as far as we can find. 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'policy'] 0m9.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'policy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'policy', 'libxcb-shm0'] 0m9.2s DUMP: libxcb-shm0: Installed: (none) Candidate: 1.6-1+squeeze1 Version table: 1.6-1+squeeze1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-cache', 'policy', 'libxcb-shm0'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-y', 'install', 'libxcb-shm0=1.6-1+squeeze1'] 0m9.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libxcb-shm0 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 9196 B of archives. After this operation, 61.4 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libxcb-shm0 amd64 1.6-1+squeeze1 [9196 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 9196 B in 0s (211 kB/s) Selecting previously deselected package libxcb-shm0. (Reading database ... 6278 files and directories currently installed.) Unpacking libxcb-shm0 (from .../libxcb-shm0_1.6-1+squeeze1_amd64.deb) ... Setting up libxcb-shm0 (1.6-1+squeeze1) ... 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', '-y', 'install', 'libxcb-shm0=1.6-1+squeeze1'] 0m9.7s INFO: Running scripts post_install 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_install_exceptions'] 0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_install_exceptions'] 0m9.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m10.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m10.7s DEBUG: No broken symlinks as far as we can find. 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--get-selections', '*'] 0m10.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install libxau6 install libxcb-shm0 install libxcb1 install libxdmcp6 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--get-selections', '*'] 0m11.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmprokbqa', '-ac'] 0m11.8s DUMP: debsums: no md5sums for mawk 0m11.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmprokbqa', '-ac'] 0m11.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.8s DUMP: 0.11.6~bpo70+1 0m11.8s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.8s INFO: Running adequate version 0.11.6~bpo70+1 now. 0m11.8s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'libxcb-shm0'] 0m11.9s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'libxcb-shm0'] 0m11.9s INFO: Running scripts pre_remove 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_exceptions'] 0m12.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/pre_remove_exceptions'] 0m12.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'remove', 'libxau6', 'libxcb1', 'libxdmcp6', 'libxcb-shm0'] 0m12.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libxau6 libxcb-shm0 libxcb1 libxdmcp6 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 401 kB disk space will be freed. (Reading database ... 6283 files and directories currently installed.) Removing libxcb-shm0 ... Removing libxcb1 ... Removing libxau6 ... Removing libxdmcp6 ... 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'remove', 'libxau6', 'libxcb1', 'libxdmcp6', 'libxcb-shm0'] 0m12.7s INFO: Running scripts post_remove 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_remove_extras'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_remove_extras'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'libxau6', 'libxcb1', 'libxdmcp6'] 0m12.7s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libxau6 ... Purging configuration files for libxau6 ... Removing libxcb1 ... Purging configuration files for libxcb1 ... Removing libxdmcp6 ... Purging configuration files for libxdmcp6 ... 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'libxau6', 'libxcb1', 'libxdmcp6'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'libxcb-shm0'] 0m12.8s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libxcb-shm0 ... Purging configuration files for libxcb-shm0 ... 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', 'libxcb-shm0'] 0m12.8s INFO: Running scripts post_purge 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_purge_exceptions'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'tmp/scripts/post_purge_exceptions'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', '--pending'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--purge', '--pending'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--remove', '--pending'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg', '--remove', '--pending'] 0m12.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m13.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m13.8s DEBUG: No broken symlinks as far as we can find. 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-divert', '--list'] 0m13.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'dpkg-divert', '--list'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'apt-get', 'clean'] 0m14.8s INFO: PASS: Installation and purging test. 0m15.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'umount', '/proc'] 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprokbqa', 'umount', '/proc'] 0m15.0s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m15.1s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmprokbqa'] 0m15.1s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmprokbqa 0m15.1s INFO: PASS: All tests. 0m15.1s INFO: piuparts run ends. ret=0 End: 2014-07-31 03:20:24 UTC