Start: 2014-09-26 08:24:02 UTC Package: mailfront Priority: extra Section: mail Installed-Size: 604 Maintainer: Gerrit Pape Architecture: amd64 Version: 1.16-1 Depends: libbg1, libc6 (>= 2.3), libcvm1 Recommends: runit, ipsvd Filename: pool/main/m/mailfront/mailfront_1.16-1_amd64.deb Size: 125880 MD5sum: 2f0819d448fcbe53b9e749c746f71bbb SHA1: 55ab352acc774d96b7e98474e736a94bc153e2d6 SHA256: 8a341b39e07dbc1b2986e598e0b3691c330b6db4dc122383011c9e03915fb923 Description: mail server network protocol front-ends mailfront is a set of customizable network front-ends for mail servers. It contains complete SMTP, QMQP, QMTP, and POP3 front-ends as well as an authentication module for IMAP. The mail delivery front-ends also contain internal address filtering features. . Two SMTP back-ends are provided. One delivers mail to qmail-queue, mimicking most of the behavior of qmail-smtpd, with the addition of support for SMTP AUTH. The other rejects all SMTP commands if $SMTPREJECT is set, and execs its command line otherwise (in order to run the above program). Tag: interface::daemon, mail::filters, mail::pop, network::server, network::service, protocol::pop3, protocol::smtp, role::program, security::authentication Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt mailfront=1.16-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt mailfront=1.16-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp62MYPQ 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp62MYPQ 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 1661144.631895449 s in the future 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp62MYPQ/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp62MYPQ/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_forbid_home'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_forbid_home'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (28.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--get-selections', '*'] 0m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--get-selections', '*'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-divert', '--list'] 0m3.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-divert', '--list'] 0m3.5s INFO: apt-cache does not know about any of the requested packages 0m3.5s INFO: Running scripts pre_test 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_test_root_password'] 0m3.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_test_root_password'] 0m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m4.6s DEBUG: No broken symlinks as far as we can find. 0m4.6s INFO: Running scripts pre_install 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'show', 'mailfront=1.16-1'] 0m4.6s DUMP: Package: mailfront Priority: extra Section: mail Installed-Size: 604 Maintainer: Gerrit Pape Architecture: amd64 Version: 1.16-1 Depends: libbg1, libc6 (>= 2.3), libcvm1 Recommends: runit, ipsvd Filename: pool/main/m/mailfront/mailfront_1.16-1_amd64.deb Size: 125880 MD5sum: 2f0819d448fcbe53b9e749c746f71bbb SHA1: 55ab352acc774d96b7e98474e736a94bc153e2d6 SHA256: 8a341b39e07dbc1b2986e598e0b3691c330b6db4dc122383011c9e03915fb923 Description: mail server network protocol front-ends mailfront is a set of customizable network front-ends for mail servers. It contains complete SMTP, QMQP, QMTP, and POP3 front-ends as well as an authentication module for IMAP. The mail delivery front-ends also contain internal address filtering features. . Two SMTP back-ends are provided. One delivers mail to qmail-queue, mimicking most of the behavior of qmail-smtpd, with the addition of support for SMTP AUTH. The other rejects all SMTP commands if $SMTPREJECT is set, and execs its command line otherwise (in order to run the above program). Tag: interface::daemon, mail::filters, mail::pop, network::server, network::service, protocol::pop3, protocol::smtp, role::program, security::authentication 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'show', 'mailfront=1.16-1'] 0m4.6s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libbg1, libc6 (>= 2.3), libcvm1 0m4.6s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpgImnUu/piuparts-depends-dummy'] 0m4.6s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpgImnUu/piuparts-depends-dummy.deb'. 0m4.6s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpgImnUu/piuparts-depends-dummy'] 0m4.6s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpgImnUu/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp62MYPQ/tmp 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libbg1; however: Package libbg1 is not installed. piuparts-depends-dummy depends on libcvm1; however: Package libcvm1 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-yf', 'install'] 0m5.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libbg1 libcvm1 Suggested packages: libbg1-dev libcvm1-dev Recommended packages: libbg1-doc The following NEW packages will be installed: libbg1 libcvm1 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 253 kB of archives. After this operation, 553 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libbg1 amd64 1.106-1 [160 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libcvm1 amd64 0.96-1 [93.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 253 kB in 0s (0 B/s) Selecting previously deselected package libbg1. (Reading database ... 6261 files and directories currently installed.) Unpacking libbg1 (from .../libbg1_1.106-1_amd64.deb) ... Selecting previously deselected package libcvm1. Unpacking libcvm1 (from .../libcvm1_0.96-1_amd64.deb) ... Setting up libbg1 (1.106-1) ... Setting up libcvm1 (0.96-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-yf', 'install'] 0m5.3s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.3s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp62MYPQ/tmp/piuparts-depends-dummy.deb 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.3s DUMP: piuparts-depends-dummy install ok installed 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DUMP: (Reading database ... 6291 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m5.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m6.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m7.0s DEBUG: No broken symlinks as far as we can find. 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'policy'] 0m7.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'policy'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'policy', 'mailfront'] 0m7.1s DUMP: mailfront: Installed: (none) Candidate: 1.16-1 Version table: 1.16-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-cache', 'policy', 'mailfront'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-y', 'install', 'mailfront=1.16-1'] 0m7.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Recommended packages: runit ipsvd The following NEW packages will be installed: mailfront 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 126 kB of archives. After this operation, 618 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main mailfront amd64 1.16-1 [126 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 126 kB in 0s (2327 kB/s) Selecting previously deselected package mailfront. (Reading database ... 6291 files and directories currently installed.) Unpacking mailfront (from .../mailfront_1.16-1_amd64.deb) ... Setting up mailfront (1.16-1) ... 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', '-y', 'install', 'mailfront=1.16-1'] 0m7.6s INFO: Running scripts post_install 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_install_exceptions'] 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_install_exceptions'] 0m7.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m7.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m8.7s DEBUG: No broken symlinks as far as we can find. 0m8.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--get-selections', '*'] 0m8.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libbg1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libcvm1 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mailfront install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m8.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--get-selections', '*'] 0m9.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', '-ac'] 0m9.8s DUMP: debsums: no md5sums for mawk 0m9.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', '-ac'] 0m9.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.9s DUMP: 0.12~bpo70+1 0m9.9s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m9.9s INFO: Running adequate version 0.12~bpo70+1 now. 0m9.9s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'mailfront'] 0m10.0s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'mailfront'] 0m10.0s INFO: Running scripts pre_remove 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_exceptions'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/pre_remove_exceptions'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'remove', 'libcvm1', 'libbg1', 'mailfront'] 0m10.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libbg1 libcvm1 mailfront 0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded. After this operation, 1171 kB disk space will be freed. (Reading database ... 6379 files and directories currently installed.) Removing mailfront ... Removing libcvm1 ... Removing libbg1 ... 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'remove', 'libcvm1', 'libbg1', 'mailfront'] 0m10.6s INFO: Running scripts post_remove 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_remove_extras'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_remove_extras'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'libcvm1', 'libbg1'] 0m10.7s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libcvm1 ... Purging configuration files for libcvm1 ... Removing libbg1 ... Purging configuration files for libbg1 ... 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'libcvm1', 'libbg1'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'mailfront'] 0m10.7s DUMP: dpkg: warning: ignoring request to remove mailfront which isn't installed. 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', 'mailfront'] 0m10.7s INFO: Running scripts post_purge 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_purge_exceptions'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'tmp/scripts/post_purge_exceptions'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', '--pending'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--purge', '--pending'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--remove', '--pending'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg', '--remove', '--pending'] 0m10.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m11.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m11.8s DEBUG: No broken symlinks as far as we can find. 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-divert', '--list'] 0m11.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'dpkg-divert', '--list'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'apt-get', 'clean'] 0m12.9s INFO: PASS: Installation and purging test. 0m13.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'umount', '/proc'] 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp62MYPQ', 'umount', '/proc'] 0m13.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m13.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp62MYPQ'] 0m13.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp62MYPQ 0m13.3s INFO: PASS: All tests. 0m13.3s INFO: piuparts run ends. ret=0 End: 2014-09-26 08:24:15 UTC