Start: 2014-02-05 03:36:41 UTC Package: miredo Priority: optional Section: net Installed-Size: 372 Maintainer: Rémi Denis-Courmont Architecture: amd64 Version: 1.2.3-1 Depends: libc6 (>= 2.3.3), libcap2 (>= 2.10), libjudydebian1, iproute Pre-Depends: adduser, udev | makedev (>= 2.3.1-62) Filename: pool/main/m/miredo/miredo_1.2.3-1_amd64.deb Size: 221750 MD5sum: 6a5a97280e8cbe392cd08886ff8e4629 SHA1: a6495831fdebf57bec3d13ab9f95c62c532994a4 SHA256: 5173e03eccaac41e2205d94bb7b9f9c6d83b97b25b5d8b896877009dbd51b786 Description: Teredo IPv6 tunneling through NATs The Teredo IPv6 tunneling protocol encapsulates IPv6 packets into UDP/IPv4 datagrams, to allow hosts behind NAT devices to access the IPv6 Internet. . Miredo is a Teredo client (as per RFC 4380): it can provide IPv6 connectivity to a dual-stack IPv6/IPv4 host even if it is located behind a NAT. It can also operate as a Teredo relay which forwards IPv6 packets between the IPv6 Internet and remote Teredo clients. Homepage: http://www.remlab.net/miredo/ Tag: implemented-in::c, interface::commandline, interface::daemon, network::server, network::vpn, protocol::ipv6, role::program, scope::utility, use::routing Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt miredo=1.2.3-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57~201401282353~0.56-24-gffe37cd starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt miredo=1.2.3-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpPiqeTl 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpPiqeTl 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpPiqeTl/tmp/scripts/ 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpPiqeTl/tmp/scripts/ 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (19.1 MB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--get-selections', '*'] 0m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--get-selections', '*'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg-divert', '--list'] 0m3.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg-divert', '--list'] 0m3.5s INFO: apt-cache does not know about any of the requested packages 0m3.5s INFO: Running scripts pre_test 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_test_root_password'] 0m3.6s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_test_root_password'] 0m3.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m4.6s DEBUG: No broken symlinks as far as we can find. 0m4.6s INFO: Running scripts pre_install 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'show', 'miredo=1.2.3-1'] 0m4.7s DUMP: Package: miredo Priority: optional Section: net Installed-Size: 372 Maintainer: Rémi Denis-Courmont Architecture: amd64 Version: 1.2.3-1 Depends: libc6 (>= 2.3.3), libcap2 (>= 2.10), libjudydebian1, iproute Pre-Depends: adduser, udev | makedev (>= 2.3.1-62) Filename: pool/main/m/miredo/miredo_1.2.3-1_amd64.deb Size: 221750 MD5sum: 6a5a97280e8cbe392cd08886ff8e4629 SHA1: a6495831fdebf57bec3d13ab9f95c62c532994a4 SHA256: 5173e03eccaac41e2205d94bb7b9f9c6d83b97b25b5d8b896877009dbd51b786 Description: Teredo IPv6 tunneling through NATs The Teredo IPv6 tunneling protocol encapsulates IPv6 packets into UDP/IPv4 datagrams, to allow hosts behind NAT devices to access the IPv6 Internet. . Miredo is a Teredo client (as per RFC 4380): it can provide IPv6 connectivity to a dual-stack IPv6/IPv4 host even if it is located behind a NAT. It can also operate as a Teredo relay which forwards IPv6 packets between the IPv6 Internet and remote Teredo clients. Homepage: http://www.remlab.net/miredo/ Tag: implemented-in::c, interface::commandline, interface::daemon, network::server, network::vpn, protocol::ipv6, role::program, scope::utility, use::routing 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'show', 'miredo=1.2.3-1'] 0m4.7s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: adduser, udev | makedev (>= 2.3.1-62), libc6 (>= 2.3.3), libcap2 (>= 2.10), libjudydebian1, iproute 0m4.7s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp8SgBSn/piuparts-depends-dummy'] 0m4.7s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp8SgBSn/piuparts-depends-dummy.deb'. 0m4.7s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp8SgBSn/piuparts-depends-dummy'] 0m4.7s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp8SgBSn/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpPiqeTl/tmp 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on udev | makedev (>= 2.3.1-62); however: Package udev is not installed. Package makedev is not installed. piuparts-depends-dummy depends on libcap2 (>= 2.10); however: Package libcap2 is not installed. piuparts-depends-dummy depends on libjudydebian1; however: Package libjudydebian1 is not installed. piuparts-depends-dummy depends on iproute; however: Package iproute is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-yf', 'install'] 0m6.9s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: iproute libcap2 libjudydebian1 libudev0 udev Suggested packages: iproute-doc Recommended packages: libatm1 usbutils pciutils The following NEW packages will be installed: iproute libcap2 libjudydebian1 libudev0 udev 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1189 kB of archives. After this operation, 3424 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libudev0 amd64 164-3 [115 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main udev amd64 164-3 [522 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libcap2 amd64 1:2.19-3 [12.6 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libjudydebian1 amd64 1.0.5-1 [115 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main iproute amd64 20100519-3 [424 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1189 kB in 1s (907 kB/s) Selecting previously deselected package libudev0. (Reading database ... 6278 files and directories currently installed.) Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Selecting previously deselected package udev. Unpacking udev (from .../archives/udev_164-3_amd64.deb) ... Selecting previously deselected package libcap2. Unpacking libcap2 (from .../libcap2_1%3a2.19-3_amd64.deb) ... Selecting previously deselected package libjudydebian1. Unpacking libjudydebian1 (from .../libjudydebian1_1.0.5-1_amd64.deb) ... Selecting previously deselected package iproute. Unpacking iproute (from .../iproute_20100519-3_amd64.deb) ... Setting up libudev0 (164-3) ... Setting up udev (164-3) ... A chroot environment has been detected, udev not started. Setting up libcap2 (1:2.19-3) ... Setting up libjudydebian1 (1.0.5-1) ... Setting up iproute (20100519-3) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-yf', 'install'] 0m6.9s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m6.9s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpPiqeTl/tmp/piuparts-depends-dummy.deb 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.9s DUMP: (Reading database ... 6505 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m7.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m7.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m8.5s DEBUG: No broken symlinks as far as we can find. 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'policy'] 0m8.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'policy'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'policy', 'miredo'] 0m8.6s DUMP: miredo: Installed: (none) Candidate: 1.2.3-1 Version table: 1.2.3-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-cache', 'policy', 'miredo'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-y', 'install', 'miredo=1.2.3-1'] 0m9.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: miredo 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 222 kB of archives. After this operation, 381 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main miredo amd64 1.2.3-1 [222 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 222 kB in 0s (2347 kB/s) Selecting previously deselected package miredo. (Reading database ... 6505 files and directories currently installed.) Unpacking miredo (from .../miredo_1.2.3-1_amd64.deb) ... Setting up miredo (1.2.3-1) ... Creating required /dev/net/tun device file... /var/lib/dpkg/info/miredo.postinst: 15: ./MAKEDEV: not found invoke-rc.d: policy-rc.d denied execution of start. 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', '-y', 'install', 'miredo=1.2.3-1'] 0m9.4s INFO: Running scripts post_install 0m9.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m9.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m10.4s DEBUG: No broken symlinks as far as we can find. 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--get-selections', '*'] 0m10.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install iproute install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcap2 install libcomerr2 install libdb4.8 install libgcc1 install libjudydebian1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install miredo install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install udev install util-linux install xz-utils install zlib1g install 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--get-selections', '*'] 0m11.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', '-ac'] 0m11.5s DUMP: debsums: no md5sums for mawk 0m11.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', '-ac'] 0m11.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.6s DUMP: 0.11.3~bpo70+1 0m11.6s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.6s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m11.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'miredo'] 0m11.7s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'miredo'] 0m11.7s INFO: Running scripts pre_remove 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_exceptions'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/pre_remove_exceptions'] 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'remove', 'libcap2', 'iproute', 'libudev0', 'udev', 'libjudydebian1', 'miredo'] 0m12.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: iproute libcap2 libjudydebian1 libudev0 miredo udev 0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded. After this operation, 3805 kB disk space will be freed. (Reading database ... 6537 files and directories currently installed.) Removing miredo ... invoke-rc.d: policy-rc.d denied execution of stop. Removing iproute ... Removing libcap2 ... Removing libjudydebian1 ... Removing udev ... Removing libudev0 ... 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'remove', 'libcap2', 'iproute', 'libudev0', 'udev', 'libjudydebian1', 'miredo'] 0m12.5s INFO: Running scripts post_remove 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'libcap2', 'iproute', 'libudev0', 'udev', 'libjudydebian1'] 0m12.8s DUMP: (Reading database ... 6299 files and directories currently installed.) Removing libcap2 ... Purging configuration files for libcap2 ... Removing iproute ... Purging configuration files for iproute ... Removing libudev0 ... Purging configuration files for libudev0 ... Removing udev ... Purging configuration files for udev ... Removing libjudydebian1 ... Purging configuration files for libjudydebian1 ... 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'libcap2', 'iproute', 'libudev0', 'udev', 'libjudydebian1'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'miredo'] 0m12.9s DUMP: (Reading database ... 6284 files and directories currently installed.) Removing miredo ... Purging configuration files for miredo ... 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', 'miredo'] 0m12.9s INFO: Running scripts post_purge 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_purge_exceptions'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'tmp/scripts/post_purge_exceptions'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', '--pending'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--purge', '--pending'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--remove', '--pending'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg', '--remove', '--pending'] 0m12.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m13.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m13.9s DEBUG: No broken symlinks as far as we can find. 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg-divert', '--list'] 0m13.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'dpkg-divert', '--list'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m14.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'apt-get', 'clean'] 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S03bootlogd => /etc/rcS.d/S04bootlogd 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S06hwclock.sh => /etc/rcS.d/S07hwclock.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S11urandom => /etc/rcS.d/S12urandom 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S04hwclockfirst.sh => /etc/rcS.d/S05hwclockfirst.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S11mountnfs.sh => /etc/rcS.d/S12mountnfs.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S14stop-bootlogd-single => /etc/rcS.d/S15stop-bootlogd-single 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S06mtab.sh => /etc/rcS.d/S07mtab.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S09mountall-bootclean.sh => /etc/rcS.d/S10mountall-bootclean.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S12mountnfs-bootclean.sh => /etc/rcS.d/S13mountnfs-bootclean.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S05checkroot.sh => /etc/rcS.d/S06checkroot.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S04hostname.sh => /etc/rcS.d/S05hostname.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S13bootmisc.sh => /etc/rcS.d/S14bootmisc.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S02mountdevsubfs.sh => /etc/rcS.d/S03mountdevsubfs.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S10mountoverflowtmp => /etc/rcS.d/S11mountoverflowtmp 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S08mountall.sh => /etc/rcS.d/S09mountall.sh 0m14.9s DEBUG: File was renamed: /etc/rcS.d/S07checkfs.sh => /etc/rcS.d/S08checkfs.sh 0m15.0s INFO: PASS: Installation and purging test. 0m15.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'umount', '/proc'] 0m15.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpPiqeTl', 'umount', '/proc'] 0m15.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m15.3s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpPiqeTl'] 0m15.3s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpPiqeTl 0m15.3s INFO: PASS: All tests. 0m15.3s INFO: piuparts run ends. ret=0 End: 2014-02-05 03:36:56 UTC