Start: 2014-09-15 20:32:04 UTC Package: nmap Priority: extra Section: net Installed-Size: 6220 Maintainer: LaMont Jones Architecture: amd64 Version: 5.00-3 Replaces: ndiff Provides: ndiff Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), liblua5.1-0, libpcap0.8 (>= 1.0.0-1), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.2.1) Conflicts: ndiff Filename: pool/main/n/nmap/nmap_5.00-3_amd64.deb Size: 1609896 MD5sum: aef7e92792a70214b223e59b04f5e4c6 SHA1: ffd07bcfc09df8f6f48265a03df0b817e710d9e6 SHA256: 068961a9bad01c738fefd3b75e1dcc88c7f6d6e6d4bcfd51ea02181224545028 Description: The Network Mapper Nmap is a utility for network exploration or security auditing. It supports ping scanning (determine which hosts are up), many port scanning techniques, version detection (determine service protocols and application versions listening behind ports), and TCP/IP fingerprinting (remote host OS or device identification). Nmap also offers flexible target and port specification, decoy/stealth scanning, sunRPC scanning, and more. Most Unix and Windows platforms are supported in both GUI and commandline modes. Several popular handheld devices are also supported, including the Sharp Zaurus and the iPAQ. Python-Version: all Tag: admin::monitoring, implemented-in::c, interface::commandline, network::scanner, role::program, scope::utility, use::scanning Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt nmap=5.00-3 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt nmap=5.00-3 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpfUKFuT 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpfUKFuT 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 2567861.949768226 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpfUKFuT/tmp/scripts/ 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpfUKFuT/tmp/scripts/ 0m2.3s INFO: Running scripts post_setup 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (29.2 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-divert', '--list'] 0m3.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-divert', '--list'] 0m3.8s INFO: apt-cache does not know about any of the requested packages 0m3.8s INFO: Running scripts pre_test 0m3.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_test_root_password'] 0m3.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_test_root_password'] 0m3.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m4.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m4.9s DEBUG: No broken symlinks as far as we can find. 0m4.9s INFO: Running scripts pre_install 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_database-server'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_database-server'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_exceptions'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_exceptions'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_extras'] 0m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_extras'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'show', 'nmap=5.00-3'] 0m5.0s DUMP: Package: nmap Priority: extra Section: net Installed-Size: 6220 Maintainer: LaMont Jones Architecture: amd64 Version: 5.00-3 Replaces: ndiff Provides: ndiff Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), liblua5.1-0, libpcap0.8 (>= 1.0.0-1), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.2.1) Conflicts: ndiff Filename: pool/main/n/nmap/nmap_5.00-3_amd64.deb Size: 1609896 MD5sum: aef7e92792a70214b223e59b04f5e4c6 SHA1: ffd07bcfc09df8f6f48265a03df0b817e710d9e6 SHA256: 068961a9bad01c738fefd3b75e1dcc88c7f6d6e6d4bcfd51ea02181224545028 Description: The Network Mapper Nmap is a utility for network exploration or security auditing. It supports ping scanning (determine which hosts are up), many port scanning techniques, version detection (determine service protocols and application versions listening behind ports), and TCP/IP fingerprinting (remote host OS or device identification). Nmap also offers flexible target and port specification, decoy/stealth scanning, sunRPC scanning, and more. Most Unix and Windows platforms are supported in both GUI and commandline modes. Several popular handheld devices are also supported, including the Sharp Zaurus and the iPAQ. Python-Version: all Tag: admin::monitoring, implemented-in::c, interface::commandline, network::scanner, role::program, scope::utility, use::scanning 0m5.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'show', 'nmap=5.00-3'] 0m5.0s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), liblua5.1-0, libpcap0.8 (>= 1.0.0-1), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.2.1) 0m5.0s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpZBu7kb/piuparts-depends-dummy'] 0m5.1s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpZBu7kb/piuparts-depends-dummy.deb'. 0m5.1s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpZBu7kb/piuparts-depends-dummy'] 0m5.1s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpZBu7kb/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpfUKFuT/tmp 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.1s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on liblua5.1-0; however: Package liblua5.1-0 is not installed. piuparts-depends-dummy depends on libpcap0.8 (>= 1.0.0-1); however: Package libpcap0.8 is not installed. piuparts-depends-dummy depends on libpcre3 (>= 7.7); however: Package libpcre3 is not installed. piuparts-depends-dummy depends on libssl0.9.8 (>= 0.9.8f-5); however: Package libssl0.9.8 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-yf', 'install'] 0m6.0s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: liblua5.1-0 libpcap0.8 libpcre3 libssl0.9.8 The following NEW packages will be installed: liblua5.1-0 libpcap0.8 libpcre3 libssl0.9.8 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1456 kB of archives. After this operation, 3502 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main liblua5.1-0 amd64 5.1.4-5 [88.7 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libpcap0.8 amd64 1.1.1-2+squeeze1 [131 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libpcre3 amd64 8.02-1.1 [234 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1456 kB in 0s (16.3 MB/s) Selecting previously deselected package liblua5.1-0. (Reading database ... 6261 files and directories currently installed.) Unpacking liblua5.1-0 (from .../liblua5.1-0_5.1.4-5_amd64.deb) ... Selecting previously deselected package libpcap0.8. Unpacking libpcap0.8 (from .../libpcap0.8_1.1.1-2+squeeze1_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Setting up liblua5.1-0 (5.1.4-5) ... Setting up libpcap0.8 (1.1.1-2+squeeze1) ... Setting up libpcre3 (8.02-1.1) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-yf', 'install'] 0m6.0s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m6.0s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpfUKFuT/tmp/piuparts-depends-dummy.deb 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.0s DUMP: piuparts-depends-dummy install ok installed 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.0s DUMP: (Reading database ... 6310 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m6.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m6.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m7.6s DEBUG: No broken symlinks as far as we can find. 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'policy'] 0m7.6s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'policy'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'policy', 'nmap'] 0m7.6s DUMP: nmap: Installed: (none) Candidate: 5.00-3 Version table: 5.00-3 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-cache', 'policy', 'nmap'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-y', 'install', 'nmap=5.00-3'] 0m8.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: nmap 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1610 kB of archives. After this operation, 6369 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main nmap amd64 5.00-3 [1610 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1610 kB in 0s (15.9 MB/s) Selecting previously deselected package nmap. (Reading database ... 6310 files and directories currently installed.) Unpacking nmap (from .../archives/nmap_5.00-3_amd64.deb) ... Setting up nmap (5.00-3) ... 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', '-y', 'install', 'nmap=5.00-3'] 0m8.3s INFO: Running scripts post_install 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_install_exceptions'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_install_exceptions'] 0m8.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m8.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m9.4s DEBUG: No broken symlinks as far as we can find. 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--get-selections', '*'] 0m9.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblua5.1-0 install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpcap0.8 install libpcre3 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install nmap install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--get-selections', '*'] 0m9.9s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', '-ac'] 0m10.5s DUMP: debsums: no md5sums for mawk 0m10.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', '-ac'] 0m10.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s DUMP: 0.12~bpo70+1 0m10.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'nmap'] 0m10.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'nmap'] 0m10.6s INFO: Running scripts pre_remove 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_exceptions'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/pre_remove_exceptions'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'remove', 'liblua5.1-0', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'nmap'] 0m11.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: liblua5.1-0 libpcap0.8 libpcre3 libssl0.9.8 nmap 0 upgraded, 0 newly installed, 5 to remove and 0 not upgraded. After this operation, 9871 kB disk space will be freed. (Reading database ... 6428 files and directories currently installed.) Removing nmap ... Removing liblua5.1-0 ... Removing libpcap0.8 ... Removing libpcre3 ... Removing libssl0.9.8 ... 0m11.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'remove', 'liblua5.1-0', 'libpcre3', 'libssl0.9.8', 'libpcap0.8', 'nmap'] 0m11.3s INFO: Running scripts post_remove 0m11.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_remove_extras'] 0m11.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_remove_extras'] 0m11.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'liblua5.1-0', 'libpcre3', 'libssl0.9.8', 'libpcap0.8'] 0m11.5s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing liblua5.1-0 ... Purging configuration files for liblua5.1-0 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libpcap0.8 ... Purging configuration files for libpcap0.8 ... 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'liblua5.1-0', 'libpcre3', 'libssl0.9.8', 'libpcap0.8'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'nmap'] 0m11.5s DUMP: dpkg: warning: ignoring request to remove nmap which isn't installed. 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', 'nmap'] 0m11.5s INFO: Running scripts post_purge 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_purge_exceptions'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'tmp/scripts/post_purge_exceptions'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', '--pending'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--purge', '--pending'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--remove', '--pending'] 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg', '--remove', '--pending'] 0m11.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m11.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m12.6s DEBUG: No broken symlinks as far as we can find. 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-divert', '--list'] 0m12.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'dpkg-divert', '--list'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'apt-get', 'clean'] 0m13.7s INFO: PASS: Installation and purging test. 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'umount', '/proc'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpfUKFuT', 'umount', '/proc'] 0m13.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m14.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpfUKFuT'] 0m14.0s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpfUKFuT 0m14.0s INFO: PASS: All tests. 0m14.0s INFO: piuparts run ends. ret=0 End: 2014-09-15 20:32:18 UTC