Start: 2014-09-20 03:26:02 UTC Package: noflushd Priority: optional Section: utils Installed-Size: 248 Maintainer: Daniel Kobras Architecture: amd64 Version: 2.8-1 Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, ed Filename: pool/main/n/noflushd/noflushd_2.8-1_amd64.deb Size: 72316 MD5sum: 43609fcb642e59c44a2a54f88feb42c4 SHA1: a2daf9ebc9ffc776629a01affa19ae81db700733 SHA256: 1f29f206db895ab0128beb762f12957bedc2925a702e7247ee6b6825f9e2b35f Description: allow idle hard disks to spin down Noflushd is a daemon that spins down disks that have not been read from after a certain amount of time, and then prevents disk writes from spinning them back up. It's targeted for laptops but can be used on any computer with IDE or SATA disks. The effect is that the hard disk actually spins down, saving you battery power, and shutting off the loudest component of most computers. Tag: hardware::laptop, interface::daemon, network::server, role::program Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt noflushd=2.8-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt noflushd=2.8-1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpW780hl 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpW780hl 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpW780hl', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 2197423.850180412 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpW780hl', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpW780hl/tmp/scripts/ 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpW780hl/tmp/scripts/ 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (13.3 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-divert', '--list'] 0m3.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-divert', '--list'] 0m3.7s INFO: apt-cache does not know about any of the requested packages 0m3.7s INFO: Running scripts pre_test 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_test_root_password'] 0m3.7s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_test_root_password'] 0m3.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m4.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m4.7s DEBUG: No broken symlinks as far as we can find. 0m4.7s INFO: Running scripts pre_install 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_extras'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_extras'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'show', 'noflushd=2.8-1'] 0m4.9s DUMP: Package: noflushd Priority: optional Section: utils Installed-Size: 248 Maintainer: Daniel Kobras Architecture: amd64 Version: 2.8-1 Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, ed Filename: pool/main/n/noflushd/noflushd_2.8-1_amd64.deb Size: 72316 MD5sum: 43609fcb642e59c44a2a54f88feb42c4 SHA1: a2daf9ebc9ffc776629a01affa19ae81db700733 SHA256: 1f29f206db895ab0128beb762f12957bedc2925a702e7247ee6b6825f9e2b35f Description: allow idle hard disks to spin down Noflushd is a daemon that spins down disks that have not been read from after a certain amount of time, and then prevents disk writes from spinning them back up. It's targeted for laptops but can be used on any computer with IDE or SATA disks. The effect is that the hard disk actually spins down, saving you battery power, and shutting off the loudest component of most computers. Tag: hardware::laptop, interface::daemon, network::server, role::program 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'show', 'noflushd=2.8-1'] 0m4.9s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, ed 0m4.9s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpiCO8eZ/piuparts-depends-dummy'] 0m4.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpiCO8eZ/piuparts-depends-dummy.deb'. 0m4.9s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpiCO8eZ/piuparts-depends-dummy'] 0m4.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpiCO8eZ/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpW780hl/tmp 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on ed; however: Package ed is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-yf', 'install'] 0m5.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: ed The following NEW packages will be installed: ed 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 61.9 kB of archives. After this operation, 160 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main ed amd64 1.4-3 [61.9 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 61.9 kB in 0s (3070 kB/s) Selecting previously deselected package ed. (Reading database ... 6261 files and directories currently installed.) Unpacking ed (from .../archives/ed_1.4-3_amd64.deb) ... Setting up ed (1.4-3) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-yf', 'install'] 0m5.6s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpW780hl/tmp/piuparts-depends-dummy.deb 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.7s DUMP: piuparts-depends-dummy install ok installed 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DUMP: (Reading database ... 6274 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m6.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m7.2s DEBUG: No broken symlinks as far as we can find. 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'policy'] 0m7.3s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'policy'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'policy', 'noflushd'] 0m7.3s DUMP: noflushd: Installed: (none) Candidate: 2.8-1 Version table: 2.8-1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-cache', 'policy', 'noflushd'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-y', 'install', 'noflushd=2.8-1'] 0m8.0s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: noflushd 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 72.3 kB of archives. After this operation, 254 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main noflushd amd64 2.8-1 [72.3 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 72.3 kB in 0s (3079 kB/s) Selecting previously deselected package noflushd. (Reading database ... 6274 files and directories currently installed.) Unpacking noflushd (from .../noflushd_2.8-1_amd64.deb) ... Setting up noflushd (2.8-1) ... invoke-rc.d: policy-rc.d denied execution of stop. invoke-rc.d: policy-rc.d denied execution of start. 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', '-y', 'install', 'noflushd=2.8-1'] 0m8.0s INFO: Running scripts post_install 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_install_exceptions'] 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_install_exceptions'] 0m8.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m8.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m9.1s DEBUG: No broken symlinks as far as we can find. 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--get-selections', '*'] 0m9.1s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install ed install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install noflushd install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--get-selections', '*'] 0m9.7s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpW780hl', '-ac'] 0m10.2s DUMP: debsums: no md5sums for mawk 0m10.2s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpW780hl', '-ac'] 0m10.2s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.2s DUMP: 0.12~bpo70+1 0m10.2s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.2s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.2s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'noflushd'] 0m10.3s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'noflushd'] 0m10.3s INFO: Running scripts pre_remove 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_exceptions'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/pre_remove_exceptions'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'remove', 'ed', 'noflushd'] 0m11.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: ed noflushd 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 414 kB disk space will be freed. (Reading database ... 6298 files and directories currently installed.) Removing noflushd ... invoke-rc.d: policy-rc.d denied execution of stop. Removing ed ... 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'remove', 'ed', 'noflushd'] 0m11.1s INFO: Running scripts post_remove 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_remove_extras'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_remove_extras'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'ed'] 0m11.2s DUMP: dpkg: warning: ignoring request to remove ed which isn't installed. 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'ed'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'noflushd'] 0m11.4s DUMP: (Reading database ... 6262 files and directories currently installed.) Removing noflushd ... Purging configuration files for noflushd ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', 'noflushd'] 0m11.4s INFO: Running scripts post_purge 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_purge_exceptions'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'tmp/scripts/post_purge_exceptions'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', '--pending'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--purge', '--pending'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--remove', '--pending'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg', '--remove', '--pending'] 0m11.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m12.5s DEBUG: No broken symlinks as far as we can find. 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-divert', '--list'] 0m12.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'dpkg-divert', '--list'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'apt-get', 'clean'] 0m13.5s INFO: PASS: Installation and purging test. 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'umount', '/proc'] 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpW780hl', 'umount', '/proc'] 0m13.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m13.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpW780hl'] 0m13.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpW780hl 0m13.8s INFO: PASS: All tests. 0m13.8s INFO: piuparts run ends. ret=0 End: 2014-09-20 03:26:16 UTC