Start: 2014-10-15 21:02:12 UTC Package: ntpdate Priority: optional Section: net Installed-Size: 188 Maintainer: Debian NTP Team Architecture: amd64 Source: ntp (1:4.2.6.p2+dfsg-1) Version: 1:4.2.6.p2+dfsg-1+b1 Depends: netbase, libc6 (>= 2.3.3), libcap2 (>= 2.10), libssl0.9.8 (>= 0.9.8m-1) Pre-Depends: dpkg (>= 1.15.7.2) Recommends: lockfile-progs Breaks: dhcp3-client (<< 4.1.0-1) Filename: pool/main/n/ntp/ntpdate_4.2.6.p2+dfsg-1+b1_amd64.deb Size: 79998 MD5sum: 9e28c915c0957b77fb8bc0e6ec11f591 SHA1: e31d2e877e62a35a98b3bd9db95de0190bbfea6f SHA256: 4d066d98f6f0e25f67f1fbd6d24e912ccc992fb66216dee7a33ae690ca3d0795 Description: client for setting system time from NTP servers NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is a simple NTP client that sets a system's clock to match the time obtained by communicating with one or more NTP servers. It is not sufficient, however, for maintaining an accurate clock in the long run. ntpdate by itself is useful for occasionally setting the time on machines that do not have full-time network access, such as laptops. . If the full NTP daemon from the package "ntp" is installed, then ntpdate is not necessary. Homepage: http://support.ntp.org/ Tag: admin::configuring, interface::commandline, network::client, protocol::ip, protocol::udp, role::program, use::timekeeping Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt ntpdate=1:4.2.6.p2+dfsg-1+b1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt ntpdate=1:4.2.6.p2+dfsg-1+b1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmphr70Ur 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmphr70Ur 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphr70Ur', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphr70Ur', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmphr70Ur/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmphr70Ur/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_forbid_home'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_forbid_home'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (28.4 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m2.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m2.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--get-selections', '*'] 0m3.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--get-selections', '*'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-divert', '--list'] 0m3.4s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-divert', '--list'] 0m3.4s INFO: apt-cache does not know about any of the requested packages 0m3.4s INFO: Running scripts pre_test 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_test_root_password'] 0m3.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_test_root_password'] 0m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m3.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m4.5s DEBUG: No broken symlinks as far as we can find. 0m4.5s INFO: Running scripts pre_install 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_exceptions'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_exceptions'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_extras'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_extras'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'show', 'ntpdate=1:4.2.6.p2+dfsg-1+b1'] 0m4.6s DUMP: Package: ntpdate Priority: optional Section: net Installed-Size: 188 Maintainer: Debian NTP Team Architecture: amd64 Source: ntp (1:4.2.6.p2+dfsg-1) Version: 1:4.2.6.p2+dfsg-1+b1 Depends: netbase, libc6 (>= 2.3.3), libcap2 (>= 2.10), libssl0.9.8 (>= 0.9.8m-1) Pre-Depends: dpkg (>= 1.15.7.2) Recommends: lockfile-progs Breaks: dhcp3-client (<< 4.1.0-1) Filename: pool/main/n/ntp/ntpdate_4.2.6.p2+dfsg-1+b1_amd64.deb Size: 79998 MD5sum: 9e28c915c0957b77fb8bc0e6ec11f591 SHA1: e31d2e877e62a35a98b3bd9db95de0190bbfea6f SHA256: 4d066d98f6f0e25f67f1fbd6d24e912ccc992fb66216dee7a33ae690ca3d0795 Description: client for setting system time from NTP servers NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is a simple NTP client that sets a system's clock to match the time obtained by communicating with one or more NTP servers. It is not sufficient, however, for maintaining an accurate clock in the long run. ntpdate by itself is useful for occasionally setting the time on machines that do not have full-time network access, such as laptops. . If the full NTP daemon from the package "ntp" is installed, then ntpdate is not necessary. Homepage: http://support.ntp.org/ Tag: admin::configuring, interface::commandline, network::client, protocol::ip, protocol::udp, role::program, use::timekeeping 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'show', 'ntpdate=1:4.2.6.p2+dfsg-1+b1'] 0m4.6s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: dpkg (>= 1.15.7.2), netbase, libc6 (>= 2.3.3), libcap2 (>= 2.10), libssl0.9.8 (>= 0.9.8m-1) 0m4.6s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6Zv8Wn/piuparts-depends-dummy'] 0m4.6s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp6Zv8Wn/piuparts-depends-dummy.deb'. 0m4.6s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6Zv8Wn/piuparts-depends-dummy'] 0m4.6s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp6Zv8Wn/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmphr70Ur/tmp 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.6s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on netbase; however: Package netbase is not installed. piuparts-depends-dummy depends on libcap2 (>= 2.10); however: Package libcap2 is not installed. piuparts-depends-dummy depends on libssl0.9.8 (>= 0.9.8m-1); however: Package libssl0.9.8 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.6s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-yf', 'install'] 0m5.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libcap2 libssl0.9.8 netbase Recommended packages: ifupdown The following NEW packages will be installed: libcap2 libssl0.9.8 netbase 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1035 kB of archives. After this operation, 2654 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main netbase all 4.45 [20.7 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libcap2 amd64 1:2.19-3 [12.6 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1035 kB in 0s (17.3 MB/s) Selecting previously deselected package netbase. (Reading database ... 6261 files and directories currently installed.) Unpacking netbase (from .../archives/netbase_4.45_all.deb) ... Selecting previously deselected package libcap2. Unpacking libcap2 (from .../libcap2_1%3a2.19-3_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Setting up netbase (4.45) ... Setting up libcap2 (1:2.19-3) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-yf', 'install'] 0m5.5s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.5s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmphr70Ur/tmp/piuparts-depends-dummy.deb 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.5s DUMP: piuparts-depends-dummy install ok installed 0m5.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.6s DUMP: (Reading database ... 6293 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m6.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m7.6s DEBUG: No broken symlinks as far as we can find. 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'policy'] 0m7.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'policy'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'policy', 'ntpdate'] 0m7.7s DUMP: ntpdate: Installed: (none) Candidate: 1:4.2.6.p2+dfsg-1+b1 Version table: 1:4.2.6.p2+dfsg-1+b1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-cache', 'policy', 'ntpdate'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-y', 'install', 'ntpdate=1:4.2.6.p2+dfsg-1+b1'] 0m8.3s DUMP: Reading package lists... Building dependency tree... Reading state information... Recommended packages: lockfile-progs The following NEW packages will be installed: ntpdate 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 80.0 kB of archives. After this operation, 193 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main ntpdate amd64 1:4.2.6.p2+dfsg-1+b1 [80.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 80.0 kB in 0s (1266 kB/s) Selecting previously deselected package ntpdate. (Reading database ... 6293 files and directories currently installed.) Unpacking ntpdate (from .../ntpdate_1%3a4.2.6.p2+dfsg-1+b1_amd64.deb) ... Setting up ntpdate (1:4.2.6.p2+dfsg-1+b1) ... 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', '-y', 'install', 'ntpdate=1:4.2.6.p2+dfsg-1+b1'] 0m8.3s INFO: Running scripts post_install 0m8.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_install_exceptions'] 0m8.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_install_exceptions'] 0m8.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m8.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m9.4s DEBUG: No broken symlinks as far as we can find. 0m9.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--get-selections', '*'] 0m9.4s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcap2 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install netbase install ntpdate install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--get-selections', '*'] 0m10.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphr70Ur', '-ac'] 0m10.5s DUMP: debsums: no md5sums for mawk debsums: no md5sums for netbase 0m10.5s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphr70Ur', '-ac'] 0m10.5s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s DUMP: 0.12~bpo70+1 0m10.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.5s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'ntpdate'] 0m10.7s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'ntpdate'] 0m10.7s INFO: Running scripts pre_remove 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/pre_remove_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'remove', 'libcap2', 'libssl0.9.8', 'netbase', 'ntpdate'] 0m11.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libcap2 libssl0.9.8 netbase ntpdate 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 2847 kB disk space will be freed. (Reading database ... 6311 files and directories currently installed.) Removing ntpdate ... Removing libcap2 ... Removing libssl0.9.8 ... Removing netbase ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'remove', 'libcap2', 'libssl0.9.8', 'netbase', 'ntpdate'] 0m11.4s INFO: Running scripts post_remove 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_remove_extras'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_remove_extras'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'libcap2', 'libssl0.9.8', 'netbase'] 0m11.7s DUMP: (Reading database ... 6273 files and directories currently installed.) Removing libcap2 ... Purging configuration files for libcap2 ... Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing netbase ... Purging configuration files for netbase ... 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'libcap2', 'libssl0.9.8', 'netbase'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'ntpdate'] 0m11.8s DUMP: (Reading database ... 6269 files and directories currently installed.) Removing ntpdate ... Purging configuration files for ntpdate ... 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', 'ntpdate'] 0m11.8s INFO: Running scripts post_purge 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_purge_exceptions'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'tmp/scripts/post_purge_exceptions'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', '--pending'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--purge', '--pending'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--remove', '--pending'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg', '--remove', '--pending'] 0m11.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m12.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m12.9s DEBUG: No broken symlinks as far as we can find. 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-divert', '--list'] 0m12.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'dpkg-divert', '--list'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'apt-get', 'clean'] 0m13.9s DEBUG: File was renamed: /etc/rcS.d/S11mountnfs.sh => /etc/rcS.d/S12mountnfs.sh 0m13.9s DEBUG: File was renamed: /etc/rc0.d/K04umountroot => /etc/rc0.d/K05umountroot 0m13.9s DEBUG: File was renamed: /etc/rcS.d/S14stop-bootlogd-single => /etc/rcS.d/S15stop-bootlogd-single 0m13.9s DEBUG: File was renamed: /etc/rcS.d/S12mountnfs-bootclean.sh => /etc/rcS.d/S13mountnfs-bootclean.sh 0m13.9s DEBUG: File was renamed: /etc/rc0.d/K05halt => /etc/rc0.d/K06halt 0m13.9s DEBUG: File was renamed: /etc/rc0.d/K03umountfs => /etc/rc0.d/K04umountfs 0m13.9s DEBUG: File was renamed: /etc/rcS.d/S13bootmisc.sh => /etc/rcS.d/S14bootmisc.sh 0m13.9s DEBUG: File was renamed: /etc/rc6.d/K03umountfs => /etc/rc6.d/K04umountfs 0m13.9s DEBUG: File was renamed: /etc/rc6.d/K05reboot => /etc/rc6.d/K06reboot 0m13.9s DEBUG: File was renamed: /etc/rc6.d/K04umountroot => /etc/rc6.d/K05umountroot 0m13.9s INFO: PASS: Installation and purging test. 0m14.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'umount', '/proc'] 0m14.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphr70Ur', 'umount', '/proc'] 0m14.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m14.3s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphr70Ur'] 0m14.3s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmphr70Ur 0m14.3s INFO: PASS: All tests. 0m14.3s INFO: piuparts run ends. ret=0 End: 2014-10-15 21:02:26 UTC