Start: 2014-07-25 18:20:52 UTC Package: nut-hal-drivers Priority: optional Section: admin Installed-Size: 392 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.4.3-1.1squeeze2 Provides: hal-ups-support Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.14.0), libhal1 (>= 0.5.8.1), libusb-0.1-4 (>= 2:0.1.12), udev (>= 0.124-1) Conflicts: nut Breaks: udev (<< 124-1) Filename: pool/main/n/nut/nut-hal-drivers_2.4.3-1.1squeeze2_amd64.deb Size: 156516 MD5sum: 1f364516021b8d75f5f7ffb024064a30 SHA1: a02fef1bbf4060f387a53a7a86e6a38afa74cdaa SHA256: e046bf56d7773796d10bbcdcb46fc7d1fec002e403a7d76a3f0c981aae98989f Description: network UPS tools - HAL interface Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. . This package provides add-ons for the hardware abstraction layer (HAL) that allow desktop environments to monitor locally-connected UPS equipment. The HAL drivers cannot be used at the same time as the normal NUT upsd. Homepage: http://www.networkupstools.org Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt nut-hal-drivers=2.4.3-1.1squeeze2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt nut-hal-drivers=2.4.3-1.1squeeze2 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpiWKKIW 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpiWKKIW 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-09-01 04:24:41 is 3233028.412170949 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'update'] 0m3.5s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8370 kB] Fetched 8468 kB in 0s (8890 kB/s) Reading package lists... 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'update'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-yf', 'dist-upgrade'] 0m4.5s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files dpkg tzdata 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3117 kB of archives. After this operation, 53.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze10 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main dpkg amd64 1.15.11 [2402 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2014e-0squeeze1 [639 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3117 kB in 0s (47.8 MB/s) (Reading database ... 6135 files and directories currently installed.) Preparing to replace base-files 6.0squeeze9 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace tzdata 2013i-0squeeze1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jul 25 18:20:56 UTC 2014. Universal Time is now: Fri Jul 25 18:20:56 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-yf', 'dist-upgrade'] 0m4.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpiWKKIW/tmp/scripts/ 0m4.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpiWKKIW/tmp/scripts/ 0m4.5s INFO: Running scripts post_setup 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_experimental'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_experimental'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_forbid_home'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_forbid_home'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (17.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m5.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--get-selections', '*'] 0m5.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--get-selections', '*'] 0m5.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-divert', '--list'] 0m5.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-divert', '--list'] 0m5.9s INFO: apt-cache does not know about any of the requested packages 0m5.9s INFO: Running scripts pre_test 0m5.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_test_root_password'] 0m5.9s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_test_root_password'] 0m5.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m6.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m6.9s DEBUG: No broken symlinks as far as we can find. 0m6.9s INFO: Running scripts pre_install 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_database-server'] 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_database-server'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_exceptions'] 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_exceptions'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_extras'] 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_extras'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'show', 'nut-hal-drivers=2.4.3-1.1squeeze2'] 0m7.1s DUMP: Package: nut-hal-drivers Priority: optional Section: admin Installed-Size: 392 Maintainer: Arnaud Quette Architecture: amd64 Source: nut Version: 2.4.3-1.1squeeze2 Provides: hal-ups-support Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.14.0), libhal1 (>= 0.5.8.1), libusb-0.1-4 (>= 2:0.1.12), udev (>= 0.124-1) Conflicts: nut Breaks: udev (<< 124-1) Filename: pool/main/n/nut/nut-hal-drivers_2.4.3-1.1squeeze2_amd64.deb Size: 156516 MD5sum: 1f364516021b8d75f5f7ffb024064a30 SHA1: a02fef1bbf4060f387a53a7a86e6a38afa74cdaa SHA256: e046bf56d7773796d10bbcdcb46fc7d1fec002e403a7d76a3f0c981aae98989f Description: network UPS tools - HAL interface Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. . This package provides add-ons for the hardware abstraction layer (HAL) that allow desktop environments to monitor locally-connected UPS equipment. The HAL drivers cannot be used at the same time as the normal NUT upsd. Homepage: http://www.networkupstools.org 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'show', 'nut-hal-drivers=2.4.3-1.1squeeze2'] 0m7.1s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.14.0), libhal1 (>= 0.5.8.1), libusb-0.1-4 (>= 2:0.1.12), udev (>= 0.124-1) Conflicts: nut 0m7.1s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpnKnPlO/piuparts-depends-dummy'] 0m7.1s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpnKnPlO/piuparts-depends-dummy.deb'. 0m7.1s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpnKnPlO/piuparts-depends-dummy'] 0m7.1s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpnKnPlO/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpiWKKIW/tmp 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.1s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libdbus-1-3 (>= 1.0.2); however: Package libdbus-1-3 is not installed. piuparts-depends-dummy depends on libdbus-glib-1-2 (>= 0.78); however: Package libdbus-glib-1-2 is not installed. piuparts-depends-dummy depends on libglib2.0-0 (>= 2.14.0); however: Package libglib2.0-0 is not installed. piuparts-depends-dummy depends on libhal1 (>= 0.5.8.1); however: Package libhal1 is not installed. piuparts-depends-dummy depends on udev (>= 0.124-1); however: Package udev is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-yf', 'install'] 0m8.1s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libpcre3 libudev0 udev Recommended packages: dbus libglib2.0-data shared-mime-info usbutils pciutils The following NEW packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libpcre3 libudev0 udev 0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 2411 kB of archives. After this operation, 5738 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libdbus-1-3 amd64 1.2.24-4+squeeze2 [146 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libpcre3 amd64 8.02-1.1 [234 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libglib2.0-0 amd64 2.24.2-1 [1122 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libdbus-glib-1-2 amd64 0.88-2.1+squeeze1 [173 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libhal1 amd64 0.5.14-3 [98.0 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libudev0 amd64 164-3 [115 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main udev amd64 164-3 [522 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2411 kB in 0s (18.0 MB/s) Selecting previously deselected package libdbus-1-3. (Reading database ... 6261 files and directories currently installed.) Unpacking libdbus-1-3 (from .../libdbus-1-3_1.2.24-4+squeeze2_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ... Selecting previously deselected package libdbus-glib-1-2. Unpacking libdbus-glib-1-2 (from .../libdbus-glib-1-2_0.88-2.1+squeeze1_amd64.deb) ... Selecting previously deselected package libhal1. Unpacking libhal1 (from .../libhal1_0.5.14-3_amd64.deb) ... Selecting previously deselected package libudev0. Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ... Selecting previously deselected package udev. Unpacking udev (from .../archives/udev_164-3_amd64.deb) ... Setting up libdbus-1-3 (1.2.24-4+squeeze2) ... Setting up libpcre3 (8.02-1.1) ... Setting up libglib2.0-0 (2.24.2-1) ... Setting up libdbus-glib-1-2 (0.88-2.1+squeeze1) ... Setting up libhal1 (0.5.14-3) ... Setting up libudev0 (164-3) ... Setting up udev (164-3) ... A chroot environment has been detected, udev not started. Setting up piuparts-depends-dummy (0.invalid.0) ... 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-yf', 'install'] 0m8.1s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m8.1s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpiWKKIW/tmp/piuparts-depends-dummy.deb 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m8.1s DUMP: piuparts-depends-dummy install ok installed 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m8.1s DUMP: (Reading database ... 6483 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m8.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m8.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m8.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m8.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m8.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m9.7s DEBUG: No broken symlinks as far as we can find. 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'policy'] 0m9.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'policy'] 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'policy', 'nut-hal-drivers'] 0m9.8s DUMP: nut-hal-drivers: Installed: (none) Candidate: 2.4.3-1.1squeeze2 Version table: 2.4.3-1.1squeeze2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m9.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-cache', 'policy', 'nut-hal-drivers'] 0m9.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-y', 'install', 'nut-hal-drivers=2.4.3-1.1squeeze2'] 0m10.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: nut-hal-drivers 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 157 kB of archives. After this operation, 401 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main nut-hal-drivers amd64 2.4.3-1.1squeeze2 [157 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 157 kB in 0s (2761 kB/s) Selecting previously deselected package nut-hal-drivers. (Reading database ... 6483 files and directories currently installed.) Unpacking nut-hal-drivers (from .../nut-hal-drivers_2.4.3-1.1squeeze2_amd64.deb) ... Setting up nut-hal-drivers (2.4.3-1.1squeeze2) ... 0m10.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', '-y', 'install', 'nut-hal-drivers=2.4.3-1.1squeeze2'] 0m10.3s INFO: Running scripts post_install 0m10.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_install_exceptions'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_install_exceptions'] 0m10.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m10.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m11.6s DEBUG: No broken symlinks as far as we can find. 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--get-selections', '*'] 0m11.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libdbus-1-3 install libdbus-glib-1-2 install libgcc1 install libglib2.0-0 install libhal1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libpcre3 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libudev0 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install nut-hal-drivers install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install udev install util-linux install xz-utils install zlib1g install 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--get-selections', '*'] 0m12.1s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', '-ac'] 0m12.7s DUMP: debsums: no md5sums for mawk 0m12.7s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', '-ac'] 0m12.7s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m12.7s DUMP: 0.11.6~bpo70+1 0m12.7s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m12.7s INFO: Running adequate version 0.11.6~bpo70+1 now. 0m12.7s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'nut-hal-drivers'] 0m12.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'nut-hal-drivers'] 0m12.8s INFO: Running scripts pre_remove 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_exceptions'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/pre_remove_exceptions'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'remove', 'libglib2.0-0', 'libhal1', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libudev0', 'udev', 'nut-hal-drivers'] 0m13.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 libhal1 libpcre3 libudev0 nut-hal-drivers udev 0 upgraded, 0 newly installed, 8 to remove and 0 not upgraded. After this operation, 6140 kB disk space will be freed. (Reading database ... 6499 files and directories currently installed.) Removing nut-hal-drivers ... Removing libhal1 ... Removing libdbus-glib-1-2 ... Removing libdbus-1-3 ... Removing libglib2.0-0 ... Removing libpcre3 ... Removing udev ... Removing libudev0 ... 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'remove', 'libglib2.0-0', 'libhal1', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libudev0', 'udev', 'nut-hal-drivers'] 0m13.5s INFO: Running scripts post_remove 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_remove_extras'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_remove_extras'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'libglib2.0-0', 'libhal1', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libudev0', 'udev'] 0m13.7s DUMP: (Reading database ... 6270 files and directories currently installed.) Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing libhal1 ... Purging configuration files for libhal1 ... Removing libdbus-1-3 ... Purging configuration files for libdbus-1-3 ... Removing libdbus-glib-1-2 ... Purging configuration files for libdbus-glib-1-2 ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Removing libudev0 ... Purging configuration files for libudev0 ... Removing udev ... Purging configuration files for udev ... 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'libglib2.0-0', 'libhal1', 'libdbus-1-3', 'libdbus-glib-1-2', 'libpcre3', 'libudev0', 'udev'] 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'nut-hal-drivers'] 0m13.8s DUMP: dpkg: warning: ignoring request to remove nut-hal-drivers which isn't installed. 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', 'nut-hal-drivers'] 0m13.8s INFO: Running scripts post_purge 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_purge_exceptions'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'tmp/scripts/post_purge_exceptions'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', '--pending'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--purge', '--pending'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--remove', '--pending'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg', '--remove', '--pending'] 0m13.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m14.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m14.9s DEBUG: No broken symlinks as far as we can find. 0m14.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-divert', '--list'] 0m14.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m14.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'dpkg-divert', '--list'] 0m14.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m15.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'apt-get', 'clean'] 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S03bootlogd => /etc/rcS.d/S04bootlogd 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S06hwclock.sh => /etc/rcS.d/S07hwclock.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S11urandom => /etc/rcS.d/S12urandom 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S04hwclockfirst.sh => /etc/rcS.d/S05hwclockfirst.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S11mountnfs.sh => /etc/rcS.d/S12mountnfs.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S14stop-bootlogd-single => /etc/rcS.d/S15stop-bootlogd-single 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S06mtab.sh => /etc/rcS.d/S07mtab.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S09mountall-bootclean.sh => /etc/rcS.d/S10mountall-bootclean.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S12mountnfs-bootclean.sh => /etc/rcS.d/S13mountnfs-bootclean.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S05checkroot.sh => /etc/rcS.d/S06checkroot.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S04hostname.sh => /etc/rcS.d/S05hostname.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S13bootmisc.sh => /etc/rcS.d/S14bootmisc.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S02mountdevsubfs.sh => /etc/rcS.d/S03mountdevsubfs.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S10mountoverflowtmp => /etc/rcS.d/S11mountoverflowtmp 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S08mountall.sh => /etc/rcS.d/S09mountall.sh 0m15.9s DEBUG: File was renamed: /etc/rcS.d/S07checkfs.sh => /etc/rcS.d/S08checkfs.sh 0m15.9s INFO: PASS: Installation and purging test. 0m16.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'umount', '/proc'] 0m16.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpiWKKIW', 'umount', '/proc'] 0m16.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m16.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpiWKKIW'] 0m16.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpiWKKIW 0m16.3s INFO: PASS: All tests. 0m16.3s INFO: piuparts run ends. ret=0 End: 2014-07-25 18:21:08 UTC