Start: 2014-02-01 05:06:40 UTC Package: radsecproxy Priority: optional Section: net Installed-Size: 188 Maintainer: Faidon Liambotis Architecture: amd64 Version: 1.4-1+squeeze1 Provides: radius-server Depends: libc6 (>= 2.3.4), libssl0.9.8 (>= 0.9.8m-1) Filename: pool/main/r/radsecproxy/radsecproxy_1.4-1+squeeze1_amd64.deb Size: 69654 MD5sum: 611e9ea63c25353dc30dda9e47ef025d SHA1: 51858cc004feb0e0f8c69e2129d8c08f65b18b02 SHA256: e3857a9f65d00b88e33a801dcc148da1db65de4a7a7577febe4c8eb9df04e555 Description: RADIUS protocol proxy supporting RadSec A generic RADIUS proxy that in addition to usual RADIUS UDP transport also supports TLS (RadSec). It aims to be flexible while at the same time small in size and memory footprint, efficient and easy to configure. . It can be useful as a proxy on site boundaries or in other complex RADIUS routing topologies. It supports both IPv4 and IPv6. Homepage: http://software.uninett.no/radsecproxy/ Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt radsecproxy=1.4-1+squeeze1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57~201401282353~0.56-24-gffe37cd starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt radsecproxy=1.4-1+squeeze1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp09h9ac 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp09h9ac 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp09h9ac', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp09h9ac', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-yf', 'dist-upgrade'] 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp09h9ac/tmp/scripts/ 0m2.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmp09h9ac/tmp/scripts/ 0m2.2s INFO: Running scripts post_setup 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_experimental'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (18.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--get-selections', '*'] 0m3.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--get-selections', '*'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg-divert', '--list'] 0m3.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg-divert', '--list'] 0m3.5s INFO: apt-cache does not know about any of the requested packages 0m3.5s INFO: Running scripts pre_test 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_test_root_password'] 0m3.5s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_test_root_password'] 0m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m4.5s DEBUG: No broken symlinks as far as we can find. 0m4.5s INFO: Running scripts pre_install 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_database-server'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_exceptions'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_exceptions'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'show', 'radsecproxy=1.4-1+squeeze1'] 0m4.6s DUMP: Package: radsecproxy Priority: optional Section: net Installed-Size: 188 Maintainer: Faidon Liambotis Architecture: amd64 Version: 1.4-1+squeeze1 Provides: radius-server Depends: libc6 (>= 2.3.4), libssl0.9.8 (>= 0.9.8m-1) Filename: pool/main/r/radsecproxy/radsecproxy_1.4-1+squeeze1_amd64.deb Size: 69654 MD5sum: 611e9ea63c25353dc30dda9e47ef025d SHA1: 51858cc004feb0e0f8c69e2129d8c08f65b18b02 SHA256: e3857a9f65d00b88e33a801dcc148da1db65de4a7a7577febe4c8eb9df04e555 Description: RADIUS protocol proxy supporting RadSec A generic RADIUS proxy that in addition to usual RADIUS UDP transport also supports TLS (RadSec). It aims to be flexible while at the same time small in size and memory footprint, efficient and easy to configure. . It can be useful as a proxy on site boundaries or in other complex RADIUS routing topologies. It supports both IPv4 and IPv6. Homepage: http://software.uninett.no/radsecproxy/ 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'show', 'radsecproxy=1.4-1+squeeze1'] 0m4.6s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3.4), libssl0.9.8 (>= 0.9.8m-1) 0m4.6s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpO9OWPh/piuparts-depends-dummy'] 0m4.6s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpO9OWPh/piuparts-depends-dummy.deb'. 0m4.6s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpO9OWPh/piuparts-depends-dummy'] 0m4.6s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpO9OWPh/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmp09h9ac/tmp 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libssl0.9.8 (>= 0.9.8m-1); however: Package libssl0.9.8 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-yf', 'install'] 0m5.6s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libssl0.9.8 The following NEW packages will be installed: libssl0.9.8 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1002 kB of archives. After this operation, 2482 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1002 kB in 0s (21.5 MB/s) Selecting previously deselected package libssl0.9.8. (Reading database ... 6278 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-yf', 'install'] 0m5.6s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmp09h9ac/tmp/piuparts-depends-dummy.deb 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DUMP: (Reading database ... 6296 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m6.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m7.1s DEBUG: No broken symlinks as far as we can find. 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'policy'] 0m7.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'policy'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'policy', 'radsecproxy'] 0m7.2s DUMP: radsecproxy: Installed: (none) Candidate: 1.4-1+squeeze1 Version table: 1.4-1+squeeze1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-cache', 'policy', 'radsecproxy'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-y', 'install', 'radsecproxy=1.4-1+squeeze1'] 0m8.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: radsecproxy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 69.7 kB of archives. After this operation, 193 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main radsecproxy amd64 1.4-1+squeeze1 [69.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 69.7 kB in 0s (154 kB/s) Selecting previously deselected package radsecproxy. (Reading database ... 6296 files and directories currently installed.) Unpacking radsecproxy (from .../radsecproxy_1.4-1+squeeze1_amd64.deb) ... Setting up radsecproxy (1.4-1+squeeze1) ... invoke-rc.d: policy-rc.d denied execution of start. 0m8.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', '-y', 'install', 'radsecproxy=1.4-1+squeeze1'] 0m8.2s INFO: Running scripts post_install 0m8.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m8.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m9.2s DEBUG: No broken symlinks as far as we can find. 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--get-selections', '*'] 0m9.2s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libssl0.9.8 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install radsecproxy install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--get-selections', '*'] 0m9.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp09h9ac', '-ac'] 0m10.3s DUMP: debsums: no md5sums for mawk 0m10.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp09h9ac', '-ac'] 0m10.3s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.3s DUMP: 0.11.3~bpo70+1 0m10.3s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.3s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m10.3s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'radsecproxy'] 0m10.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'radsecproxy'] 0m10.5s INFO: Running scripts pre_remove 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_exceptions'] 0m10.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/pre_remove_exceptions'] 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'remove', 'libssl0.9.8', 'radsecproxy'] 0m11.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libssl0.9.8 radsecproxy 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 2675 kB disk space will be freed. (Reading database ... 6311 files and directories currently installed.) Removing radsecproxy ... invoke-rc.d: policy-rc.d denied execution of stop. Removing libssl0.9.8 ... 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'remove', 'libssl0.9.8', 'radsecproxy'] 0m11.2s INFO: Running scripts post_remove 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'libssl0.9.8'] 0m11.4s DUMP: (Reading database ... 6280 files and directories currently installed.) Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'libssl0.9.8'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'radsecproxy'] 0m11.4s DUMP: (Reading database ... 6280 files and directories currently installed.) Removing radsecproxy ... Purging configuration files for radsecproxy ... 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', 'radsecproxy'] 0m11.4s INFO: Running scripts post_purge 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_purge_exceptions'] 0m11.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'tmp/scripts/post_purge_exceptions'] 0m11.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', '--pending'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--purge', '--pending'] 0m11.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--remove', '--pending'] 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg', '--remove', '--pending'] 0m11.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m11.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m12.5s DEBUG: No broken symlinks as far as we can find. 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg-divert', '--list'] 0m12.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'dpkg-divert', '--list'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'apt-get', 'clean'] 0m13.5s INFO: PASS: Installation and purging test. 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'umount', '/proc'] 0m13.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp09h9ac', 'umount', '/proc'] 0m13.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m13.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp09h9ac'] 0m13.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp09h9ac 0m13.8s INFO: PASS: All tests. 0m13.8s INFO: piuparts run ends. ret=0 End: 2014-02-01 05:06:54 UTC