Start: 2014-08-25 15:08:34 UTC Package: recode Priority: optional Section: text Installed-Size: 772 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-17 Depends: libc6 (>= 2.3), librecode0 (>= 3.6), dpkg (>= 1.15.4) | install-info Filename: pool/main/r/recode/recode_3.6-17_amd64.deb Size: 197762 MD5sum: c99bccfee824bce1e7bfb0c3584a8978 SHA1: 25ee12258f05963b43ebaa8ab944ef6fb68df001 SHA256: e55a735f52e12164ad1d6fec20432dc25fa24d2c263e474b681ae5a846def6b3 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt recode=3.6-17 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt recode=3.6-17 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpzKYDU5 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpzKYDU5 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 4401671.758357699 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'update'] 0m1.8s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'update'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-yf', 'dist-upgrade'] 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpzKYDU5/tmp/scripts/ 0m2.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpzKYDU5/tmp/scripts/ 0m2.1s INFO: Running scripts post_setup 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_experimental'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_forbid_home'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (23.1 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--get-selections', '*'] 0m3.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--get-selections', '*'] 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-divert', '--list'] 0m3.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-divert', '--list'] 0m3.6s INFO: apt-cache does not know about any of the requested packages 0m3.6s INFO: Running scripts pre_test 0m3.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_test_root_password'] 0m3.6s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_test_root_password'] 0m3.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m3.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m4.6s DEBUG: No broken symlinks as far as we can find. 0m4.6s INFO: Running scripts pre_install 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_database-server'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_exceptions'] 0m4.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_extras'] 0m4.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_extras'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'show', 'recode=3.6-17'] 0m4.7s DUMP: Package: recode Priority: optional Section: text Installed-Size: 772 Maintainer: Santiago Vila Architecture: amd64 Version: 3.6-17 Depends: libc6 (>= 2.3), librecode0 (>= 3.6), dpkg (>= 1.15.4) | install-info Filename: pool/main/r/recode/recode_3.6-17_amd64.deb Size: 197762 MD5sum: c99bccfee824bce1e7bfb0c3584a8978 SHA1: 25ee12258f05963b43ebaa8ab944ef6fb68df001 SHA256: e55a735f52e12164ad1d6fec20432dc25fa24d2c263e474b681ae5a846def6b3 Description: Character set conversion utility Free `recode' converts files between character sets and usages. When exact transliterations are not possible, it may get rid of the offending characters or fall back on approximations. This program recognizes or produces nearly 300 different character sets and is able to transliterate files between almost any pair. Most RFC 1345 character sets, and all `libiconv' character sets, are supported. Tag: devel::i18n, interface::commandline, role::program, scope::utility, use::converting, works-with::text 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'show', 'recode=3.6-17'] 0m4.7s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), librecode0 (>= 3.6), dpkg (>= 1.15.4) | install-info 0m4.7s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6YFFmB/piuparts-depends-dummy'] 0m4.7s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp6YFFmB/piuparts-depends-dummy.deb'. 0m4.7s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp6YFFmB/piuparts-depends-dummy'] 0m4.7s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp6YFFmB/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpzKYDU5/tmp 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on librecode0 (>= 3.6); however: Package librecode0 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.7s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-yf', 'install'] 0m6.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: librecode0 The following NEW packages will be installed: librecode0 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 773 kB of archives. After this operation, 1905 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main librecode0 amd64 3.6-17 [773 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 773 kB in 1s (731 kB/s) Selecting previously deselected package librecode0. (Reading database ... 6261 files and directories currently installed.) Unpacking librecode0 (from .../librecode0_3.6-17_amd64.deb) ... Setting up librecode0 (3.6-17) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-yf', 'install'] 0m6.5s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m6.5s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpzKYDU5/tmp/piuparts-depends-dummy.deb 0m6.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.5s DUMP: piuparts-depends-dummy install ok installed 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.5s DUMP: (Reading database ... 6267 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m7.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m7.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m8.0s DEBUG: No broken symlinks as far as we can find. 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'policy'] 0m8.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'policy'] 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'policy', 'recode'] 0m8.0s DUMP: recode: Installed: (none) Candidate: 3.6-17 Version table: 3.6-17 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-cache', 'policy', 'recode'] 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-y', 'install', 'recode=3.6-17'] 0m8.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: recode 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 198 kB of archives. After this operation, 791 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main recode amd64 3.6-17 [198 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 198 kB in 0s (3633 kB/s) Selecting previously deselected package recode. (Reading database ... 6267 files and directories currently installed.) Unpacking recode (from .../recode_3.6-17_amd64.deb) ... Setting up recode (3.6-17) ... 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', '-y', 'install', 'recode=3.6-17'] 0m8.6s INFO: Running scripts post_install 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_install_exceptions'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_install_exceptions'] 0m8.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m8.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m9.6s DEBUG: No broken symlinks as far as we can find. 0m9.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--get-selections', '*'] 0m9.6s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install librecode0 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install recode install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m9.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--get-selections', '*'] 0m10.1s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', '-ac'] 0m10.7s DUMP: debsums: no md5sums for mawk 0m10.7s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', '-ac'] 0m10.7s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.7s DUMP: 0.12~bpo70+1 0m10.7s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.7s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.7s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'recode'] 0m10.9s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'recode'] 0m10.9s INFO: Running scripts pre_remove 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_exceptions'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/pre_remove_exceptions'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'remove', 'librecode0', 'recode'] 0m11.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: librecode0 recode 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 2695 kB disk space will be freed. (Reading database ... 6308 files and directories currently installed.) Removing recode ... Removing librecode0 ... 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'remove', 'librecode0', 'recode'] 0m11.6s INFO: Running scripts post_remove 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_remove_extras'] 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_remove_extras'] 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'librecode0'] 0m11.6s DUMP: dpkg: warning: ignoring request to remove librecode0 which isn't installed. 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'librecode0'] 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'recode'] 0m11.6s DUMP: dpkg: warning: ignoring request to remove recode which isn't installed. 0m11.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', 'recode'] 0m11.6s INFO: Running scripts post_purge 0m11.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_purge_exceptions'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'tmp/scripts/post_purge_exceptions'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', '--pending'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--purge', '--pending'] 0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--remove', '--pending'] 0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg', '--remove', '--pending'] 0m11.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m11.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m12.7s DEBUG: No broken symlinks as far as we can find. 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-divert', '--list'] 0m12.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'dpkg-divert', '--list'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'apt-get', 'clean'] 0m13.7s INFO: PASS: Installation and purging test. 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'umount', '/proc'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpzKYDU5', 'umount', '/proc'] 0m13.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m14.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpzKYDU5'] 0m14.0s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpzKYDU5 0m14.0s INFO: PASS: All tests. 0m14.0s INFO: piuparts run ends. ret=0 End: 2014-08-25 15:08:49 UTC