Start: 2014-02-16 11:48:27 UTC Package: rsyslog-gssapi Priority: extra Section: admin Installed-Size: 176 Maintainer: Michael Biebl Architecture: amd64 Source: rsyslog Version: 4.6.4-2 Depends: libc6 (>= 2.3), libgssapi-krb5-2 (>= 1.8+dfsg), rsyslog (= 4.6.4-2) Suggests: krb5-user Filename: pool/main/r/rsyslog/rsyslog-gssapi_4.6.4-2_amd64.deb Size: 107838 MD5sum: 80d4649acaa62389a2d87c34a8f610df SHA1: 395ae9466499d4f4089424abf5ca2992ab666d08 SHA256: f45e1187d1f7e8b478d50027276c50208d23b6e98b3c7ab3f9e26d10f8dd7bc0 Description: GSSAPI authentication and encryption support for rsyslog These plugins allow rsyslog to write and/or receive GSSAPI authenticated and encrypted syslog messages. GSSAPI is commonly used for Kerberos authentication. Homepage: http://www.rsyslog.com/ Tag: qa::low-popcon Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt rsyslog-gssapi=4.6.4-2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt rsyslog-gssapi=4.6.4-2 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpLgrqZI 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpLgrqZI 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'update'] 0m3.9s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 1s (6893 kB/s) Reading package lists... 0m3.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'update'] 0m3.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-yf', 'dist-upgrade'] 0m5.2s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (34.6 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Feb 16 11:48:32 UTC 2014. Universal Time is now: Sun Feb 16 11:48:32 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-yf', 'dist-upgrade'] 0m5.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpLgrqZI/tmp/scripts/ 0m5.2s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpLgrqZI/tmp/scripts/ 0m5.2s INFO: Running scripts post_setup 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_experimental'] 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_experimental'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_forbid_home'] 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_forbid_home'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_force-unsafe-io'] 0m5.2s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_force-unsafe-io'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_squeeze-backports'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_squeeze-backports'] 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m6.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (16.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m6.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m6.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--get-selections', '*'] 0m6.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--get-selections', '*'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-divert', '--list'] 0m6.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-divert', '--list'] 0m6.8s INFO: apt-cache does not know about any of the requested packages 0m6.8s INFO: Running scripts pre_test 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_test_root_password'] 0m6.9s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_test_root_password'] 0m6.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m7.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m7.9s DEBUG: No broken symlinks as far as we can find. 0m7.9s INFO: Running scripts pre_install 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_database-server'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_database-server'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_exceptions'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_exceptions'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_extras'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_extras'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'show', 'rsyslog-gssapi=4.6.4-2'] 0m8.0s DUMP: Package: rsyslog-gssapi Priority: extra Section: admin Installed-Size: 176 Maintainer: Michael Biebl Architecture: amd64 Source: rsyslog Version: 4.6.4-2 Depends: libc6 (>= 2.3), libgssapi-krb5-2 (>= 1.8+dfsg), rsyslog (= 4.6.4-2) Suggests: krb5-user Filename: pool/main/r/rsyslog/rsyslog-gssapi_4.6.4-2_amd64.deb Size: 107838 MD5sum: 80d4649acaa62389a2d87c34a8f610df SHA1: 395ae9466499d4f4089424abf5ca2992ab666d08 SHA256: f45e1187d1f7e8b478d50027276c50208d23b6e98b3c7ab3f9e26d10f8dd7bc0 Description: GSSAPI authentication and encryption support for rsyslog These plugins allow rsyslog to write and/or receive GSSAPI authenticated and encrypted syslog messages. GSSAPI is commonly used for Kerberos authentication. Homepage: http://www.rsyslog.com/ Tag: qa::low-popcon 0m8.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'show', 'rsyslog-gssapi=4.6.4-2'] 0m8.0s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libgssapi-krb5-2 (>= 1.8+dfsg), rsyslog (= 4.6.4-2) 0m8.0s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpwprTG1/piuparts-depends-dummy'] 0m8.0s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpwprTG1/piuparts-depends-dummy.deb'. 0m8.0s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpwprTG1/piuparts-depends-dummy'] 0m8.0s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpwprTG1/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpLgrqZI/tmp 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m8.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libgssapi-krb5-2 (>= 1.8+dfsg); however: Package libgssapi-krb5-2 is not installed. piuparts-depends-dummy depends on rsyslog (= 4.6.4-2); however: Package rsyslog is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m8.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m8.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-yf', 'install'] 0m9.2s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libgssapi-krb5-2 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 rsyslog Suggested packages: krb5-doc krb5-user rsyslog-mysql rsyslog-pgsql rsyslog-doc rsyslog-gnutls rsyslog-gssapi rsyslog-relp Recommended packages: logrotate The following NEW packages will be installed: libgssapi-krb5-2 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 rsyslog 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 993 kB of archives. After this operation, 2589 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libkeyutils1 amd64 1.4-1 [6942 B] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libkrb5support0 amd64 1.8.3+dfsg-4squeeze7 [46.5 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libk5crypto3 amd64 1.8.3+dfsg-4squeeze7 [106 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libkrb5-3 amd64 1.8.3+dfsg-4squeeze7 [374 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libgssapi-krb5-2 amd64 1.8.3+dfsg-4squeeze7 [131 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main rsyslog amd64 4.6.4-2 [330 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 993 kB in 0s (6470 kB/s) Selecting previously deselected package libkeyutils1. (Reading database ... 6258 files and directories currently installed.) Unpacking libkeyutils1 (from .../libkeyutils1_1.4-1_amd64.deb) ... Selecting previously deselected package libkrb5support0. Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package libk5crypto3. Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package libkrb5-3. Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package libgssapi-krb5-2. Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.8.3+dfsg-4squeeze7_amd64.deb) ... Selecting previously deselected package rsyslog. Unpacking rsyslog (from .../rsyslog_4.6.4-2_amd64.deb) ... Setting up libkeyutils1 (1.4-1) ... Setting up libkrb5support0 (1.8.3+dfsg-4squeeze7) ... Setting up libk5crypto3 (1.8.3+dfsg-4squeeze7) ... Setting up libkrb5-3 (1.8.3+dfsg-4squeeze7) ... Setting up libgssapi-krb5-2 (1.8.3+dfsg-4squeeze7) ... Setting up rsyslog (4.6.4-2) ... invoke-rc.d: policy-rc.d denied execution of start. Setting up piuparts-depends-dummy (0.invalid.0) ... 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-yf', 'install'] 0m9.2s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m9.2s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpLgrqZI/tmp/piuparts-depends-dummy.deb 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.2s DUMP: piuparts-depends-dummy install ok installed 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.2s DUMP: (Reading database ... 6329 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m9.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m10.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m10.7s DEBUG: No broken symlinks as far as we can find. 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'policy'] 0m10.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'policy'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'policy', 'rsyslog-gssapi'] 0m10.8s DUMP: rsyslog-gssapi: Installed: (none) Candidate: 4.6.4-2 Version table: 4.6.4-2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-cache', 'policy', 'rsyslog-gssapi'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-y', 'install', 'rsyslog-gssapi=4.6.4-2'] 0m11.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: krb5-user The following NEW packages will be installed: rsyslog-gssapi 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 108 kB of archives. After this operation, 180 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main rsyslog-gssapi amd64 4.6.4-2 [108 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 108 kB in 0s (3215 kB/s) Selecting previously deselected package rsyslog-gssapi. (Reading database ... 6329 files and directories currently installed.) Unpacking rsyslog-gssapi (from .../rsyslog-gssapi_4.6.4-2_amd64.deb) ... Setting up rsyslog-gssapi (4.6.4-2) ... 0m11.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', '-y', 'install', 'rsyslog-gssapi=4.6.4-2'] 0m11.5s INFO: Running scripts post_install 0m11.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m11.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m12.5s DEBUG: No broken symlinks as far as we can find. 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--get-selections', '*'] 0m12.5s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install libgssapi-krb5-2 install libk5crypto3 install libkeyutils1 install libkrb5-3 install libkrb5support0 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install rsyslog install rsyslog-gssapi install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--get-selections', '*'] 0m13.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', '-ac'] 0m13.6s DUMP: debsums: no md5sums for mawk 0m13.6s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', '-ac'] 0m13.6s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.6s DUMP: 0.11.3~bpo70+1 0m13.6s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m13.6s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m13.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'rsyslog-gssapi'] 0m13.7s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'rsyslog-gssapi'] 0m13.7s INFO: Running scripts pre_remove 0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m13.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/pre_remove_exceptions'] 0m13.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'remove', 'libk5crypto3', 'libkrb5-3', 'libkeyutils1', 'rsyslog', 'libkrb5support0', 'libgssapi-krb5-2', 'rsyslog-gssapi'] 0m14.6s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libgssapi-krb5-2 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 rsyslog rsyslog-gssapi 0 upgraded, 0 newly installed, 7 to remove and 0 not upgraded. After this operation, 2769 kB disk space will be freed. (Reading database ... 6336 files and directories currently installed.) Removing rsyslog-gssapi ... Removing libgssapi-krb5-2 ... Removing libkrb5-3 ... Removing libk5crypto3 ... Removing libkrb5support0 ... Removing libkeyutils1 ... Removing rsyslog ... invoke-rc.d: policy-rc.d denied execution of stop. 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'remove', 'libk5crypto3', 'libkrb5-3', 'libkeyutils1', 'rsyslog', 'libkrb5support0', 'libgssapi-krb5-2', 'rsyslog-gssapi'] 0m14.6s INFO: Running scripts post_remove 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_remove_exceptions_lenny'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_remove_exceptions_lenny'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'libk5crypto3', 'libkrb5-3', 'libkeyutils1', 'rsyslog', 'libkrb5support0', 'libgssapi-krb5-2'] 0m14.7s DUMP: (Reading database ... 6265 files and directories currently installed.) Removing libk5crypto3 ... Purging configuration files for libk5crypto3 ... Removing libkrb5-3 ... Purging configuration files for libkrb5-3 ... Removing libkeyutils1 ... Purging configuration files for libkeyutils1 ... Removing rsyslog ... Purging configuration files for rsyslog ... Removing libkrb5support0 ... Purging configuration files for libkrb5support0 ... Removing libgssapi-krb5-2 ... Purging configuration files for libgssapi-krb5-2 ... 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'libk5crypto3', 'libkrb5-3', 'libkeyutils1', 'rsyslog', 'libkrb5support0', 'libgssapi-krb5-2'] 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'rsyslog-gssapi'] 0m14.7s DUMP: dpkg: warning: ignoring request to remove rsyslog-gssapi which isn't installed. 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', 'rsyslog-gssapi'] 0m14.7s INFO: Running scripts post_purge 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_purge_exceptions'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'tmp/scripts/post_purge_exceptions'] 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', '--pending'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--purge', '--pending'] 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--remove', '--pending'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg', '--remove', '--pending'] 0m14.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m15.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m15.8s DEBUG: No broken symlinks as far as we can find. 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-divert', '--list'] 0m15.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'dpkg-divert', '--list'] 0m15.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m15.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'apt-get', 'clean'] 0m16.8s DEBUG: File was renamed: /etc/rc0.d/K01hwclock.sh => /etc/rc0.d/K03hwclock.sh 0m16.8s DEBUG: File was renamed: /etc/rc0.d/K04umountroot => /etc/rc0.d/K05umountroot 0m16.8s DEBUG: File was renamed: /etc/rc6.d/K01hwclock.sh => /etc/rc6.d/K03hwclock.sh 0m16.8s DEBUG: File was renamed: /etc/rc0.d/K05halt => /etc/rc0.d/K06halt 0m16.8s DEBUG: File was renamed: /etc/rc0.d/K03umountfs => /etc/rc0.d/K04umountfs 0m16.8s DEBUG: File was renamed: /etc/rc6.d/K03umountfs => /etc/rc6.d/K04umountfs 0m16.8s DEBUG: File was renamed: /etc/rc6.d/K05reboot => /etc/rc6.d/K06reboot 0m16.8s DEBUG: File was renamed: /etc/rc6.d/K02umountnfs.sh => /etc/rc6.d/K03umountnfs.sh 0m16.8s DEBUG: File was renamed: /etc/rc6.d/K04umountroot => /etc/rc6.d/K05umountroot 0m16.8s DEBUG: File was renamed: /etc/rc0.d/K02umountnfs.sh => /etc/rc0.d/K03umountnfs.sh 0m16.8s INFO: PASS: Installation and purging test. 0m17.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'umount', '/proc'] 0m17.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpLgrqZI', 'umount', '/proc'] 0m17.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m17.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpLgrqZI'] 0m17.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpLgrqZI 0m17.2s INFO: PASS: All tests. 0m17.2s INFO: piuparts run ends. ret=0 End: 2014-02-16 11:48:44 UTC